diff --git a/marvell/linux/lib/mpi/mpih-div.c b/marvell/linux/lib/mpi/mpih-div.c
new file mode 100644
index 0000000..913a519
--- /dev/null
+++ b/marvell/linux/lib/mpi/mpih-div.c
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* mpihelp-div.c  -  MPI helper functions
+ *	Copyright (C) 1994, 1996 Free Software Foundation, Inc.
+ *	Copyright (C) 1998, 1999 Free Software Foundation, Inc.
+ *
+ * This file is part of GnuPG.
+ *
+ * Note: This code is heavily based on the GNU MP Library.
+ *	 Actually it's the same code with only minor changes in the
+ *	 way the data is stored; this is to support the abstraction
+ *	 of an optional secure memory allocation which may be used
+ *	 to avoid revealing of sensitive data due to paging etc.
+ *	 The GNU MP Library itself is published under the LGPL;
+ *	 however I decided to publish this code under the plain GPL.
+ */
+
+#include "mpi-internal.h"
+#include "longlong.h"
+
+#ifndef UMUL_TIME
+#define UMUL_TIME 1
+#endif
+#ifndef UDIV_TIME
+#define UDIV_TIME UMUL_TIME
+#endif
+
+/* Divide num (NP/NSIZE) by den (DP/DSIZE) and write
+ * the NSIZE-DSIZE least significant quotient limbs at QP
+ * and the DSIZE long remainder at NP.	If QEXTRA_LIMBS is
+ * non-zero, generate that many fraction bits and append them after the
+ * other quotient limbs.
+ * Return the most significant limb of the quotient, this is always 0 or 1.
+ *
+ * Preconditions:
+ * 0. NSIZE >= DSIZE.
+ * 1. The most significant bit of the divisor must be set.
+ * 2. QP must either not overlap with the input operands at all, or
+ *    QP + DSIZE >= NP must hold true.	(This means that it's
+ *    possible to put the quotient in the high part of NUM, right after the
+ *    remainder in NUM.
+ * 3. NSIZE >= DSIZE, even if QEXTRA_LIMBS is non-zero.
+ */
+
+mpi_limb_t
+mpihelp_divrem(mpi_ptr_t qp, mpi_size_t qextra_limbs,
+	       mpi_ptr_t np, mpi_size_t nsize, mpi_ptr_t dp, mpi_size_t dsize)
+{
+	mpi_limb_t most_significant_q_limb = 0;
+
+	switch (dsize) {
+	case 0:
+		/* We are asked to divide by zero, so go ahead and do it!  (To make
+		   the compiler not remove this statement, return the value.)  */
+		/*
+		 * existing clients of this function have been modified
+		 * not to call it with dsize == 0, so this should not happen
+		 */
+		return 1 / dsize;
+
+	case 1:
+		{
+			mpi_size_t i;
+			mpi_limb_t n1;
+			mpi_limb_t d;
+
+			d = dp[0];
+			n1 = np[nsize - 1];
+
+			if (n1 >= d) {
+				n1 -= d;
+				most_significant_q_limb = 1;
+			}
+
+			qp += qextra_limbs;
+			for (i = nsize - 2; i >= 0; i--)
+				udiv_qrnnd(qp[i], n1, n1, np[i], d);
+			qp -= qextra_limbs;
+
+			for (i = qextra_limbs - 1; i >= 0; i--)
+				udiv_qrnnd(qp[i], n1, n1, 0, d);
+
+			np[0] = n1;
+		}
+		break;
+
+	case 2:
+		{
+			mpi_size_t i;
+			mpi_limb_t n1, n0, n2;
+			mpi_limb_t d1, d0;
+
+			np += nsize - 2;
+			d1 = dp[1];
+			d0 = dp[0];
+			n1 = np[1];
+			n0 = np[0];
+
+			if (n1 >= d1 && (n1 > d1 || n0 >= d0)) {
+				sub_ddmmss(n1, n0, n1, n0, d1, d0);
+				most_significant_q_limb = 1;
+			}
+
+			for (i = qextra_limbs + nsize - 2 - 1; i >= 0; i--) {
+				mpi_limb_t q;
+				mpi_limb_t r;
+
+				if (i >= qextra_limbs)
+					np--;
+				else
+					np[0] = 0;
+
+				if (n1 == d1) {
+					/* Q should be either 111..111 or 111..110.  Need special
+					 * treatment of this rare case as normal division would
+					 * give overflow.  */
+					q = ~(mpi_limb_t) 0;
+
+					r = n0 + d1;
+					if (r < d1) {	/* Carry in the addition? */
+						add_ssaaaa(n1, n0, r - d0,
+							   np[0], 0, d0);
+						qp[i] = q;
+						continue;
+					}
+					n1 = d0 - (d0 != 0 ? 1 : 0);
+					n0 = -d0;
+				} else {
+					udiv_qrnnd(q, r, n1, n0, d1);
+					umul_ppmm(n1, n0, d0, q);
+				}
+
+				n2 = np[0];
+q_test:
+				if (n1 > r || (n1 == r && n0 > n2)) {
+					/* The estimated Q was too large.  */
+					q--;
+					sub_ddmmss(n1, n0, n1, n0, 0, d0);
+					r += d1;
+					if (r >= d1)	/* If not carry, test Q again.  */
+						goto q_test;
+				}
+
+				qp[i] = q;
+				sub_ddmmss(n1, n0, r, n2, n1, n0);
+			}
+			np[1] = n1;
+			np[0] = n0;
+		}
+		break;
+
+	default:
+		{
+			mpi_size_t i;
+			mpi_limb_t dX, d1, n0;
+
+			np += nsize - dsize;
+			dX = dp[dsize - 1];
+			d1 = dp[dsize - 2];
+			n0 = np[dsize - 1];
+
+			if (n0 >= dX) {
+				if (n0 > dX
+				    || mpihelp_cmp(np, dp, dsize - 1) >= 0) {
+					mpihelp_sub_n(np, np, dp, dsize);
+					n0 = np[dsize - 1];
+					most_significant_q_limb = 1;
+				}
+			}
+
+			for (i = qextra_limbs + nsize - dsize - 1; i >= 0; i--) {
+				mpi_limb_t q;
+				mpi_limb_t n1, n2;
+				mpi_limb_t cy_limb;
+
+				if (i >= qextra_limbs) {
+					np--;
+					n2 = np[dsize];
+				} else {
+					n2 = np[dsize - 1];
+					MPN_COPY_DECR(np + 1, np, dsize - 1);
+					np[0] = 0;
+				}
+
+				if (n0 == dX) {
+					/* This might over-estimate q, but it's probably not worth
+					 * the extra code here to find out.  */
+					q = ~(mpi_limb_t) 0;
+				} else {
+					mpi_limb_t r;
+
+					udiv_qrnnd(q, r, n0, np[dsize - 1], dX);
+					umul_ppmm(n1, n0, d1, q);
+
+					while (n1 > r
+					       || (n1 == r
+						   && n0 > np[dsize - 2])) {
+						q--;
+						r += dX;
+						if (r < dX)	/* I.e. "carry in previous addition?" */
+							break;
+						n1 -= n0 < d1;
+						n0 -= d1;
+					}
+				}
+
+				/* Possible optimization: We already have (q * n0) and (1 * n1)
+				 * after the calculation of q.  Taking advantage of that, we
+				 * could make this loop make two iterations less.  */
+				cy_limb = mpihelp_submul_1(np, dp, dsize, q);
+
+				if (n2 != cy_limb) {
+					mpihelp_add_n(np, np, dp, dsize);
+					q--;
+				}
+
+				qp[i] = q;
+				n0 = np[dsize - 1];
+			}
+		}
+	}
+
+	return most_significant_q_limb;
+}