ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/tools/leds/.gitignore b/marvell/linux/tools/leds/.gitignore
new file mode 100644
index 0000000..ac96d9f
--- /dev/null
+++ b/marvell/linux/tools/leds/.gitignore
@@ -0,0 +1 @@
+uledmon
diff --git a/marvell/linux/tools/leds/Makefile b/marvell/linux/tools/leds/Makefile
new file mode 100644
index 0000000..7b6bed1
--- /dev/null
+++ b/marvell/linux/tools/leds/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for LEDs tools
+
+CFLAGS = -Wall -Wextra -g -I../../include/uapi
+
+all: uledmon led_hw_brightness_mon
+%: %.c
+ $(CC) $(CFLAGS) -o $@ $^
+
+clean:
+ $(RM) uledmon led_hw_brightness_mon
+
+.PHONY: all clean
diff --git a/marvell/linux/tools/leds/get_led_device_info.sh b/marvell/linux/tools/leds/get_led_device_info.sh
new file mode 100755
index 0000000..ccfa442
--- /dev/null
+++ b/marvell/linux/tools/leds/get_led_device_info.sh
@@ -0,0 +1,201 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+led_common_defs_path="include/dt-bindings/leds/common.h"
+
+num_args=$#
+if [ $num_args -eq 1 ]; then
+ linux_top=$(dirname `realpath $0` | awk -F/ \
+ '{ \
+ i=1; \
+ while (i <= NF - 2) { \
+ printf $i"/"; \
+ i++; \
+ }; \
+ }')
+ led_defs_path=$linux_top/$led_common_defs_path
+elif [ $num_args -eq 2 ]; then
+ led_defs_path=`realpath $2`
+else
+ echo "Usage: get_led_device_info.sh LED_CDEV_PATH [LED_COMMON_DEFS_PATH]"
+ exit 1
+fi
+
+if [ ! -f $led_defs_path ]; then
+ echo "$led_defs_path doesn't exist"
+ exit 1
+fi
+
+led_cdev_path=`echo $1 | sed s'/\/$//'`
+
+ls "$led_cdev_path/brightness" > /dev/null 2>&1
+if [ $? -ne 0 ]; then
+ echo "Device \"$led_cdev_path\" does not exist."
+ exit 1
+fi
+
+bus=`readlink $led_cdev_path/device/subsystem | sed s'/.*\///'`
+usb_subdev=`readlink $led_cdev_path | grep usb | sed s'/\(.*usb[0-9]*\/[0-9]*-[0-9]*\)\/.*/\1/'`
+ls "$led_cdev_path/device/of_node/compatible" > /dev/null 2>&1
+of_node_missing=$?
+
+if [ "$bus" = "input" ]; then
+ input_node=`readlink $led_cdev_path/device | sed s'/.*\///'`
+ if [ ! -z "$usb_subdev" ]; then
+ bus="usb"
+ fi
+fi
+
+if [ "$bus" = "usb" ]; then
+ usb_interface=`readlink $led_cdev_path | sed s'/.*\(usb[0-9]*\)/\1/' | cut -d\/ -f3`
+ cd $led_cdev_path/../$usb_subdev
+ driver=`readlink $usb_interface/driver | sed s'/.*\///'`
+ if [ -d "$usb_interface/ieee80211" ]; then
+ wifi_phy=`ls -l $usb_interface/ieee80211 | grep phy | awk '{print $9}'`
+ fi
+ idVendor=`cat idVendor`
+ idProduct=`cat idProduct`
+ manufacturer=`cat manufacturer`
+ product=`cat product`
+elif [ "$bus" = "input" ]; then
+ cd $led_cdev_path
+ product=`cat device/name`
+ driver=`cat device/device/driver/description`
+elif [ $of_node_missing -eq 0 ]; then
+ cd $led_cdev_path
+ compatible=`cat device/of_node/compatible`
+ if [ "$compatible" = "gpio-leds" ]; then
+ driver="leds-gpio"
+ elif [ "$compatible" = "pwm-leds" ]; then
+ driver="leds-pwm"
+ else
+ manufacturer=`echo $compatible | awk -F, '{print $1}'`
+ product=`echo $compatible | awk -F, '{print $2}'`
+ fi
+else
+ echo "Unknown device type."
+ exit 1
+fi
+
+printf "\n#####################################\n"
+printf "# LED class device hardware details #\n"
+printf "#####################################\n\n"
+
+printf "bus:\t\t\t$bus\n"
+
+if [ ! -z "$idVendor" ]; then
+ printf "idVendor:\t\t$idVendor\n"
+fi
+
+if [ ! -z "$idProduct" ]; then
+ printf "idProduct:\t\t$idProduct\n"
+fi
+
+if [ ! -z "$manufacturer" ]; then
+ printf "manufacturer:\t\t$manufacturer\n"
+fi
+
+if [ ! -z "$product" ]; then
+ printf "product:\t\t$product\n"
+fi
+
+if [ ! -z "$driver" ]; then
+ printf "driver:\t\t\t$driver\n"
+fi
+
+if [ ! -z "$input_node" ]; then
+ printf "associated input node:\t$input_node\n"
+fi
+
+printf "\n####################################\n"
+printf "# LED class device name validation #\n"
+printf "####################################\n\n"
+
+led_name=`echo $led_cdev_path | sed s'/.*\///'`
+
+num_sections=`echo $led_name | awk -F: '{print NF}'`
+
+if [ $num_sections -eq 1 ]; then
+ printf "\":\" delimiter not detected.\t[ FAILED ]\n"
+ exit 1
+elif [ $num_sections -eq 2 ]; then
+ color=`echo $led_name | cut -d: -f1`
+ function=`echo $led_name | cut -d: -f2`
+elif [ $num_sections -eq 3 ]; then
+ devicename=`echo $led_name | cut -d: -f1`
+ color=`echo $led_name | cut -d: -f2`
+ function=`echo $led_name | cut -d: -f3`
+else
+ printf "Detected %d sections in the LED class device name - should the script be updated?\n" $num_sections
+ exit 1
+fi
+
+S_DEV="devicename"
+S_CLR="color "
+S_FUN="function "
+status_tab=20
+
+print_msg_ok()
+{
+ local section_name="$1"
+ local section_val="$2"
+ local msg="$3"
+ printf "$section_name :\t%-${status_tab}.${status_tab}s %s %s\n" "$section_val" "[ OK ] " "$msg"
+}
+
+print_msg_failed()
+{
+ local section_name="$1"
+ local section_val="$2"
+ local msg="$3"
+ printf "$section_name :\t%-${status_tab}.${status_tab}s %s %s\n" "$section_val" "[ FAILED ]" "$msg"
+}
+
+if [ ! -z "$input_node" ]; then
+ expected_devname=$input_node
+elif [ ! -z "$wifi_phy" ]; then
+ expected_devname=$wifi_phy
+fi
+
+if [ ! -z "$devicename" ]; then
+ if [ ! -z "$expected_devname" ]; then
+ if [ "$devicename" = "$expected_devname" ]; then
+ print_msg_ok "$S_DEV" "$devicename"
+ else
+ print_msg_failed "$S_DEV" "$devicename" "Expected: $expected_devname"
+ fi
+ else
+ if [ "$devicename" = "$manufacturer" ]; then
+ print_msg_failed "$S_DEV" "$devicename" "Redundant: use of vendor name is discouraged"
+ elif [ "$devicename" = "$product" ]; then
+ print_msg_failed "$S_DEV" "$devicename" "Redundant: use of product name is discouraged"
+ else
+ print_msg_failed "$S_DEV" "$devicename" "Unknown devicename - should the script be updated?"
+ fi
+ fi
+elif [ ! -z "$expected_devname" ]; then
+ print_msg_failed "$S_DEV" "blank" "Expected: $expected_devname"
+fi
+
+if [ ! -z "$color" ]; then
+ color_upper=`echo $color | tr [:lower:] [:upper:]`
+ color_id_definition=$(cat $led_defs_path | grep "_$color_upper\s" | awk '{print $2}')
+ if [ ! -z "$color_id_definition" ]; then
+ print_msg_ok "$S_CLR" "$color" "Matching definition: $color_id_definition"
+ else
+ print_msg_failed "$S_CLR" "$color" "Definition not found in $led_defs_path"
+ fi
+
+fi
+
+if [ ! -z "$function" ]; then
+ # strip optional enumerator
+ function=`echo $function | sed s'/\(.*\)-[0-9]*$/\1/'`
+ fun_definition=$(cat $led_defs_path | grep "\"$function\"" | awk '{print $2}')
+ if [ ! -z "$fun_definition" ]; then
+ print_msg_ok "$S_FUN" "$function" "Matching definition: $fun_definition"
+ else
+ print_msg_failed "$S_FUN" "$function" "Definition not found in $led_defs_path"
+ fi
+
+fi
diff --git a/marvell/linux/tools/leds/led_hw_brightness_mon.c b/marvell/linux/tools/leds/led_hw_brightness_mon.c
new file mode 100644
index 0000000..eb65ae9
--- /dev/null
+++ b/marvell/linux/tools/leds/led_hw_brightness_mon.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * led_hw_brightness_mon.c
+ *
+ * This program monitors LED brightness level changes having its origin
+ * in hardware/firmware, i.e. outside of kernel control.
+ * A timestamp and brightness value is printed each time the brightness changes.
+ *
+ * Usage: led_hw_brightness_mon <device-name>
+ *
+ * <device-name> is the name of the LED class device to be monitored. Pressing
+ * CTRL+C will exit.
+ */
+
+#include <errno.h>
+#include <fcntl.h>
+#include <poll.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <unistd.h>
+
+#include <linux/uleds.h>
+
+int main(int argc, char const *argv[])
+{
+ int fd, ret;
+ char brightness_file_path[LED_MAX_NAME_SIZE + 11];
+ struct pollfd pollfd;
+ struct timespec ts;
+ char buf[11];
+
+ if (argc != 2) {
+ fprintf(stderr, "Requires <device-name> argument\n");
+ return 1;
+ }
+
+ snprintf(brightness_file_path, LED_MAX_NAME_SIZE,
+ "/sys/class/leds/%s/brightness_hw_changed", argv[1]);
+
+ fd = open(brightness_file_path, O_RDONLY);
+ if (fd == -1) {
+ printf("Failed to open %s file\n", brightness_file_path);
+ return 1;
+ }
+
+ /*
+ * read may fail if no hw brightness change has occurred so far,
+ * but it is required to avoid spurious poll notifications in
+ * the opposite case.
+ */
+ read(fd, buf, sizeof(buf));
+
+ pollfd.fd = fd;
+ pollfd.events = POLLPRI;
+
+ while (1) {
+ ret = poll(&pollfd, 1, -1);
+ if (ret == -1) {
+ printf("Failed to poll %s file (%d)\n",
+ brightness_file_path, ret);
+ ret = 1;
+ break;
+ }
+
+ clock_gettime(CLOCK_MONOTONIC, &ts);
+
+ ret = read(fd, buf, sizeof(buf));
+ if (ret < 0)
+ break;
+
+ ret = lseek(pollfd.fd, 0, SEEK_SET);
+ if (ret < 0) {
+ printf("lseek failed (%d)\n", ret);
+ break;
+ }
+
+ printf("[%ld.%09ld] %d\n", ts.tv_sec, ts.tv_nsec, atoi(buf));
+ }
+
+ close(fd);
+
+ return ret;
+}
diff --git a/marvell/linux/tools/leds/uledmon.c b/marvell/linux/tools/leds/uledmon.c
new file mode 100644
index 0000000..c15a39c
--- /dev/null
+++ b/marvell/linux/tools/leds/uledmon.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * uledmon.c
+ *
+ * This program creates a new userspace LED class device and monitors it. A
+ * timestamp and brightness value is printed each time the brightness changes.
+ *
+ * Usage: uledmon <device-name>
+ *
+ * <device-name> is the name of the LED class device to be created. Pressing
+ * CTRL+C will exit.
+ */
+
+#include <fcntl.h>
+#include <stdio.h>
+#include <string.h>
+#include <time.h>
+#include <unistd.h>
+
+#include <linux/uleds.h>
+
+int main(int argc, char const *argv[])
+{
+ struct uleds_user_dev uleds_dev;
+ int fd, ret;
+ int brightness;
+ struct timespec ts;
+
+ if (argc != 2) {
+ fprintf(stderr, "Requires <device-name> argument\n");
+ return 1;
+ }
+
+ strncpy(uleds_dev.name, argv[1], LED_MAX_NAME_SIZE);
+ uleds_dev.max_brightness = 100;
+
+ fd = open("/dev/uleds", O_RDWR);
+ if (fd == -1) {
+ perror("Failed to open /dev/uleds");
+ return 1;
+ }
+
+ ret = write(fd, &uleds_dev, sizeof(uleds_dev));
+ if (ret == -1) {
+ perror("Failed to write to /dev/uleds");
+ close(fd);
+ return 1;
+ }
+
+ while (1) {
+ ret = read(fd, &brightness, sizeof(brightness));
+ if (ret == -1) {
+ perror("Failed to read from /dev/uleds");
+ close(fd);
+ return 1;
+ }
+ clock_gettime(CLOCK_MONOTONIC, &ts);
+ printf("[%ld.%09ld] %u\n", ts.tv_sec, ts.tv_nsec, brightness);
+ }
+
+ close(fd);
+
+ return 0;
+}