ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/tools/testing/selftests/bpf/test_tunnel.sh b/marvell/linux/tools/testing/selftests/bpf/test_tunnel.sh
new file mode 100755
index 0000000..1ccbe80
--- /dev/null
+++ b/marvell/linux/tools/testing/selftests/bpf/test_tunnel.sh
@@ -0,0 +1,798 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# End-to-end eBPF tunnel test suite
+# The script tests BPF network tunnel implementation.
+#
+# Topology:
+# ---------
+# root namespace | at_ns0 namespace
+# |
+# ----------- | -----------
+# | tnl dev | | | tnl dev | (overlay network)
+# ----------- | -----------
+# metadata-mode | native-mode
+# with bpf |
+# |
+# ---------- | ----------
+# | veth1 | --------- | veth0 | (underlay network)
+# ---------- peer ----------
+#
+#
+# Device Configuration
+# --------------------
+# Root namespace with metadata-mode tunnel + BPF
+# Device names and addresses:
+# veth1 IP: 172.16.1.200, IPv6: 00::22 (underlay)
+# tunnel dev <type>11, ex: gre11, IPv4: 10.1.1.200, IPv6: 1::22 (overlay)
+#
+# Namespace at_ns0 with native tunnel
+# Device names and addresses:
+# veth0 IPv4: 172.16.1.100, IPv6: 00::11 (underlay)
+# tunnel dev <type>00, ex: gre00, IPv4: 10.1.1.100, IPv6: 1::11 (overlay)
+#
+#
+# End-to-end ping packet flow
+# ---------------------------
+# Most of the tests start by namespace creation, device configuration,
+# then ping the underlay and overlay network. When doing 'ping 10.1.1.100'
+# from root namespace, the following operations happen:
+# 1) Route lookup shows 10.1.1.100/24 belongs to tnl dev, fwd to tnl dev.
+# 2) Tnl device's egress BPF program is triggered and set the tunnel metadata,
+# with remote_ip=172.16.1.200 and others.
+# 3) Outer tunnel header is prepended and route the packet to veth1's egress
+# 4) veth0's ingress queue receive the tunneled packet at namespace at_ns0
+# 5) Tunnel protocol handler, ex: vxlan_rcv, decap the packet
+# 6) Forward the packet to the overlay tnl dev
+
+PING_ARG="-c 3 -w 10 -q"
+ret=0
+GREEN='\033[0;92m'
+RED='\033[0;31m'
+NC='\033[0m' # No Color
+
+config_device()
+{
+ ip netns add at_ns0
+ ip link add veth0 type veth peer name veth1
+ ip link set veth0 netns at_ns0
+ ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0
+ ip netns exec at_ns0 ip link set dev veth0 up
+ ip link set dev veth1 up mtu 1500
+ ip addr add dev veth1 172.16.1.200/24
+}
+
+add_gre_tunnel()
+{
+ # at_ns0 namespace
+ ip netns exec at_ns0 \
+ ip link add dev $DEV_NS type $TYPE seq key 2 \
+ local 172.16.1.100 remote 172.16.1.200
+ ip netns exec at_ns0 ip link set dev $DEV_NS up
+ ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+
+ # root namespace
+ ip link add dev $DEV type $TYPE key 2 external
+ ip link set dev $DEV up
+ ip addr add dev $DEV 10.1.1.200/24
+}
+
+add_ip6gretap_tunnel()
+{
+
+ # assign ipv6 address
+ ip netns exec at_ns0 ip addr add ::11/96 dev veth0
+ ip netns exec at_ns0 ip link set dev veth0 up
+ ip addr add dev veth1 ::22/96
+ ip link set dev veth1 up
+
+ # at_ns0 namespace
+ ip netns exec at_ns0 \
+ ip link add dev $DEV_NS type $TYPE seq flowlabel 0xbcdef key 2 \
+ local ::11 remote ::22
+
+ ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+ ip netns exec at_ns0 ip addr add dev $DEV_NS fc80::100/96
+ ip netns exec at_ns0 ip link set dev $DEV_NS up
+
+ # root namespace
+ ip link add dev $DEV type $TYPE external
+ ip addr add dev $DEV 10.1.1.200/24
+ ip addr add dev $DEV fc80::200/24
+ ip link set dev $DEV up
+}
+
+add_erspan_tunnel()
+{
+ # at_ns0 namespace
+ if [ "$1" == "v1" ]; then
+ ip netns exec at_ns0 \
+ ip link add dev $DEV_NS type $TYPE seq key 2 \
+ local 172.16.1.100 remote 172.16.1.200 \
+ erspan_ver 1 erspan 123
+ else
+ ip netns exec at_ns0 \
+ ip link add dev $DEV_NS type $TYPE seq key 2 \
+ local 172.16.1.100 remote 172.16.1.200 \
+ erspan_ver 2 erspan_dir egress erspan_hwid 3
+ fi
+ ip netns exec at_ns0 ip link set dev $DEV_NS up
+ ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+
+ # root namespace
+ ip link add dev $DEV type $TYPE external
+ ip link set dev $DEV up
+ ip addr add dev $DEV 10.1.1.200/24
+}
+
+add_ip6erspan_tunnel()
+{
+
+ # assign ipv6 address
+ ip netns exec at_ns0 ip addr add ::11/96 dev veth0
+ ip netns exec at_ns0 ip link set dev veth0 up
+ ip addr add dev veth1 ::22/96
+ ip link set dev veth1 up
+
+ # at_ns0 namespace
+ if [ "$1" == "v1" ]; then
+ ip netns exec at_ns0 \
+ ip link add dev $DEV_NS type $TYPE seq key 2 \
+ local ::11 remote ::22 \
+ erspan_ver 1 erspan 123
+ else
+ ip netns exec at_ns0 \
+ ip link add dev $DEV_NS type $TYPE seq key 2 \
+ local ::11 remote ::22 \
+ erspan_ver 2 erspan_dir egress erspan_hwid 7
+ fi
+ ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+ ip netns exec at_ns0 ip link set dev $DEV_NS up
+
+ # root namespace
+ ip link add dev $DEV type $TYPE external
+ ip addr add dev $DEV 10.1.1.200/24
+ ip link set dev $DEV up
+}
+
+add_vxlan_tunnel()
+{
+ # Set static ARP entry here because iptables set-mark works
+ # on L3 packet, as a result not applying to ARP packets,
+ # causing errors at get_tunnel_{key/opt}.
+
+ # at_ns0 namespace
+ ip netns exec at_ns0 \
+ ip link add dev $DEV_NS type $TYPE \
+ id 2 dstport 4789 gbp remote 172.16.1.200
+ ip netns exec at_ns0 \
+ ip link set dev $DEV_NS address 52:54:00:d9:01:00 up
+ ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+ ip netns exec at_ns0 arp -s 10.1.1.200 52:54:00:d9:02:00
+ ip netns exec at_ns0 iptables -A OUTPUT -j MARK --set-mark 0x800FF
+
+ # root namespace
+ ip link add dev $DEV type $TYPE external gbp dstport 4789
+ ip link set dev $DEV address 52:54:00:d9:02:00 up
+ ip addr add dev $DEV 10.1.1.200/24
+ arp -s 10.1.1.100 52:54:00:d9:01:00
+}
+
+add_ip6vxlan_tunnel()
+{
+ #ip netns exec at_ns0 ip -4 addr del 172.16.1.100 dev veth0
+ ip netns exec at_ns0 ip -6 addr add ::11/96 dev veth0
+ ip netns exec at_ns0 ip link set dev veth0 up
+ #ip -4 addr del 172.16.1.200 dev veth1
+ ip -6 addr add dev veth1 ::22/96
+ ip link set dev veth1 up
+
+ # at_ns0 namespace
+ ip netns exec at_ns0 \
+ ip link add dev $DEV_NS type $TYPE id 22 dstport 4789 \
+ local ::11 remote ::22
+ ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+ ip netns exec at_ns0 ip link set dev $DEV_NS up
+
+ # root namespace
+ ip link add dev $DEV type $TYPE external dstport 4789
+ ip addr add dev $DEV 10.1.1.200/24
+ ip link set dev $DEV up
+}
+
+add_geneve_tunnel()
+{
+ # at_ns0 namespace
+ ip netns exec at_ns0 \
+ ip link add dev $DEV_NS type $TYPE \
+ id 2 dstport 6081 remote 172.16.1.200
+ ip netns exec at_ns0 ip link set dev $DEV_NS up
+ ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+
+ # root namespace
+ ip link add dev $DEV type $TYPE dstport 6081 external
+ ip link set dev $DEV up
+ ip addr add dev $DEV 10.1.1.200/24
+}
+
+add_ip6geneve_tunnel()
+{
+ ip netns exec at_ns0 ip addr add ::11/96 dev veth0
+ ip netns exec at_ns0 ip link set dev veth0 up
+ ip addr add dev veth1 ::22/96
+ ip link set dev veth1 up
+
+ # at_ns0 namespace
+ ip netns exec at_ns0 \
+ ip link add dev $DEV_NS type $TYPE id 22 \
+ remote ::22 # geneve has no local option
+ ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+ ip netns exec at_ns0 ip link set dev $DEV_NS up
+
+ # root namespace
+ ip link add dev $DEV type $TYPE external
+ ip addr add dev $DEV 10.1.1.200/24
+ ip link set dev $DEV up
+}
+
+add_ipip_tunnel()
+{
+ # at_ns0 namespace
+ ip netns exec at_ns0 \
+ ip link add dev $DEV_NS type $TYPE \
+ local 172.16.1.100 remote 172.16.1.200
+ ip netns exec at_ns0 ip link set dev $DEV_NS up
+ ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+
+ # root namespace
+ ip link add dev $DEV type $TYPE external
+ ip link set dev $DEV up
+ ip addr add dev $DEV 10.1.1.200/24
+}
+
+add_ip6tnl_tunnel()
+{
+ ip netns exec at_ns0 ip addr add ::11/96 dev veth0
+ ip netns exec at_ns0 ip link set dev veth0 up
+ ip addr add dev veth1 ::22/96
+ ip link set dev veth1 up
+
+ # at_ns0 namespace
+ ip netns exec at_ns0 \
+ ip link add dev $DEV_NS type $TYPE \
+ local ::11 remote ::22
+ ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+ ip netns exec at_ns0 ip addr add dev $DEV_NS 1::11/96
+ ip netns exec at_ns0 ip link set dev $DEV_NS up
+
+ # root namespace
+ ip link add dev $DEV type $TYPE external
+ ip addr add dev $DEV 10.1.1.200/24
+ ip addr add dev $DEV 1::22/96
+ ip link set dev $DEV up
+}
+
+test_gre()
+{
+ TYPE=gretap
+ DEV_NS=gretap00
+ DEV=gretap11
+ ret=0
+
+ check $TYPE
+ config_device
+ add_gre_tunnel
+ attach_bpf $DEV gre_set_tunnel gre_get_tunnel
+ ping $PING_ARG 10.1.1.100
+ check_err $?
+ ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+ check_err $?
+ cleanup
+
+ if [ $ret -ne 0 ]; then
+ echo -e ${RED}"FAIL: $TYPE"${NC}
+ return 1
+ fi
+ echo -e ${GREEN}"PASS: $TYPE"${NC}
+}
+
+test_ip6gre()
+{
+ TYPE=ip6gre
+ DEV_NS=ip6gre00
+ DEV=ip6gre11
+ ret=0
+
+ check $TYPE
+ config_device
+ # reuse the ip6gretap function
+ add_ip6gretap_tunnel
+ attach_bpf $DEV ip6gretap_set_tunnel ip6gretap_get_tunnel
+ # underlay
+ ping6 $PING_ARG ::11
+ # overlay: ipv4 over ipv6
+ ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+ ping $PING_ARG 10.1.1.100
+ check_err $?
+ # overlay: ipv6 over ipv6
+ ip netns exec at_ns0 ping6 $PING_ARG fc80::200
+ check_err $?
+ cleanup
+
+ if [ $ret -ne 0 ]; then
+ echo -e ${RED}"FAIL: $TYPE"${NC}
+ return 1
+ fi
+ echo -e ${GREEN}"PASS: $TYPE"${NC}
+}
+
+test_ip6gretap()
+{
+ TYPE=ip6gretap
+ DEV_NS=ip6gretap00
+ DEV=ip6gretap11
+ ret=0
+
+ check $TYPE
+ config_device
+ add_ip6gretap_tunnel
+ attach_bpf $DEV ip6gretap_set_tunnel ip6gretap_get_tunnel
+ # underlay
+ ping6 $PING_ARG ::11
+ # overlay: ipv4 over ipv6
+ ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+ ping $PING_ARG 10.1.1.100
+ check_err $?
+ # overlay: ipv6 over ipv6
+ ip netns exec at_ns0 ping6 $PING_ARG fc80::200
+ check_err $?
+ cleanup
+
+ if [ $ret -ne 0 ]; then
+ echo -e ${RED}"FAIL: $TYPE"${NC}
+ return 1
+ fi
+ echo -e ${GREEN}"PASS: $TYPE"${NC}
+}
+
+test_erspan()
+{
+ TYPE=erspan
+ DEV_NS=erspan00
+ DEV=erspan11
+ ret=0
+
+ check $TYPE
+ config_device
+ add_erspan_tunnel $1
+ attach_bpf $DEV erspan_set_tunnel erspan_get_tunnel
+ ping $PING_ARG 10.1.1.100
+ check_err $?
+ ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+ check_err $?
+ cleanup
+
+ if [ $ret -ne 0 ]; then
+ echo -e ${RED}"FAIL: $TYPE"${NC}
+ return 1
+ fi
+ echo -e ${GREEN}"PASS: $TYPE"${NC}
+}
+
+test_ip6erspan()
+{
+ TYPE=ip6erspan
+ DEV_NS=ip6erspan00
+ DEV=ip6erspan11
+ ret=0
+
+ check $TYPE
+ config_device
+ add_ip6erspan_tunnel $1
+ attach_bpf $DEV ip4ip6erspan_set_tunnel ip4ip6erspan_get_tunnel
+ ping6 $PING_ARG ::11
+ ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+ check_err $?
+ cleanup
+
+ if [ $ret -ne 0 ]; then
+ echo -e ${RED}"FAIL: $TYPE"${NC}
+ return 1
+ fi
+ echo -e ${GREEN}"PASS: $TYPE"${NC}
+}
+
+test_vxlan()
+{
+ TYPE=vxlan
+ DEV_NS=vxlan00
+ DEV=vxlan11
+ ret=0
+
+ check $TYPE
+ config_device
+ add_vxlan_tunnel
+ attach_bpf $DEV vxlan_set_tunnel vxlan_get_tunnel
+ ping $PING_ARG 10.1.1.100
+ check_err $?
+ ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+ check_err $?
+ cleanup
+
+ if [ $ret -ne 0 ]; then
+ echo -e ${RED}"FAIL: $TYPE"${NC}
+ return 1
+ fi
+ echo -e ${GREEN}"PASS: $TYPE"${NC}
+}
+
+test_ip6vxlan()
+{
+ TYPE=vxlan
+ DEV_NS=ip6vxlan00
+ DEV=ip6vxlan11
+ ret=0
+
+ check $TYPE
+ config_device
+ add_ip6vxlan_tunnel
+ ip link set dev veth1 mtu 1500
+ attach_bpf $DEV ip6vxlan_set_tunnel ip6vxlan_get_tunnel
+ # underlay
+ ping6 $PING_ARG ::11
+ # ip4 over ip6
+ ping $PING_ARG 10.1.1.100
+ check_err $?
+ ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+ check_err $?
+ cleanup
+
+ if [ $ret -ne 0 ]; then
+ echo -e ${RED}"FAIL: ip6$TYPE"${NC}
+ return 1
+ fi
+ echo -e ${GREEN}"PASS: ip6$TYPE"${NC}
+}
+
+test_geneve()
+{
+ TYPE=geneve
+ DEV_NS=geneve00
+ DEV=geneve11
+ ret=0
+
+ check $TYPE
+ config_device
+ add_geneve_tunnel
+ attach_bpf $DEV geneve_set_tunnel geneve_get_tunnel
+ ping $PING_ARG 10.1.1.100
+ check_err $?
+ ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+ check_err $?
+ cleanup
+
+ if [ $ret -ne 0 ]; then
+ echo -e ${RED}"FAIL: $TYPE"${NC}
+ return 1
+ fi
+ echo -e ${GREEN}"PASS: $TYPE"${NC}
+}
+
+test_ip6geneve()
+{
+ TYPE=geneve
+ DEV_NS=ip6geneve00
+ DEV=ip6geneve11
+ ret=0
+
+ check $TYPE
+ config_device
+ add_ip6geneve_tunnel
+ attach_bpf $DEV ip6geneve_set_tunnel ip6geneve_get_tunnel
+ ping $PING_ARG 10.1.1.100
+ check_err $?
+ ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+ check_err $?
+ cleanup
+
+ if [ $ret -ne 0 ]; then
+ echo -e ${RED}"FAIL: ip6$TYPE"${NC}
+ return 1
+ fi
+ echo -e ${GREEN}"PASS: ip6$TYPE"${NC}
+}
+
+test_ipip()
+{
+ TYPE=ipip
+ DEV_NS=ipip00
+ DEV=ipip11
+ ret=0
+
+ check $TYPE
+ config_device
+ add_ipip_tunnel
+ ip link set dev veth1 mtu 1500
+ attach_bpf $DEV ipip_set_tunnel ipip_get_tunnel
+ ping $PING_ARG 10.1.1.100
+ check_err $?
+ ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+ check_err $?
+ cleanup
+
+ if [ $ret -ne 0 ]; then
+ echo -e ${RED}"FAIL: $TYPE"${NC}
+ return 1
+ fi
+ echo -e ${GREEN}"PASS: $TYPE"${NC}
+}
+
+test_ipip6()
+{
+ TYPE=ip6tnl
+ DEV_NS=ipip6tnl00
+ DEV=ipip6tnl11
+ ret=0
+
+ check $TYPE
+ config_device
+ add_ip6tnl_tunnel
+ ip link set dev veth1 mtu 1500
+ attach_bpf $DEV ipip6_set_tunnel ipip6_get_tunnel
+ # underlay
+ ping6 $PING_ARG ::11
+ # ip4 over ip6
+ ping $PING_ARG 10.1.1.100
+ check_err $?
+ ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+ check_err $?
+ cleanup
+
+ if [ $ret -ne 0 ]; then
+ echo -e ${RED}"FAIL: $TYPE"${NC}
+ return 1
+ fi
+ echo -e ${GREEN}"PASS: $TYPE"${NC}
+}
+
+test_ip6ip6()
+{
+ TYPE=ip6tnl
+ DEV_NS=ip6ip6tnl00
+ DEV=ip6ip6tnl11
+ ret=0
+
+ check $TYPE
+ config_device
+ add_ip6tnl_tunnel
+ ip link set dev veth1 mtu 1500
+ attach_bpf $DEV ip6ip6_set_tunnel ip6ip6_get_tunnel
+ # underlay
+ ping6 $PING_ARG ::11
+ # ip6 over ip6
+ ping6 $PING_ARG 1::11
+ check_err $?
+ ip netns exec at_ns0 ping6 $PING_ARG 1::22
+ check_err $?
+ cleanup
+
+ if [ $ret -ne 0 ]; then
+ echo -e ${RED}"FAIL: ip6$TYPE"${NC}
+ return 1
+ fi
+ echo -e ${GREEN}"PASS: ip6$TYPE"${NC}
+}
+
+setup_xfrm_tunnel()
+{
+ auth=0x$(printf '1%.0s' {1..40})
+ enc=0x$(printf '2%.0s' {1..32})
+ spi_in_to_out=0x1
+ spi_out_to_in=0x2
+ # at_ns0 namespace
+ # at_ns0 -> root
+ ip netns exec at_ns0 \
+ ip xfrm state add src 172.16.1.100 dst 172.16.1.200 proto esp \
+ spi $spi_in_to_out reqid 1 mode tunnel \
+ auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc
+ ip netns exec at_ns0 \
+ ip xfrm policy add src 10.1.1.100/32 dst 10.1.1.200/32 dir out \
+ tmpl src 172.16.1.100 dst 172.16.1.200 proto esp reqid 1 \
+ mode tunnel
+ # root -> at_ns0
+ ip netns exec at_ns0 \
+ ip xfrm state add src 172.16.1.200 dst 172.16.1.100 proto esp \
+ spi $spi_out_to_in reqid 2 mode tunnel \
+ auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc
+ ip netns exec at_ns0 \
+ ip xfrm policy add src 10.1.1.200/32 dst 10.1.1.100/32 dir in \
+ tmpl src 172.16.1.200 dst 172.16.1.100 proto esp reqid 2 \
+ mode tunnel
+ # address & route
+ ip netns exec at_ns0 \
+ ip addr add dev veth0 10.1.1.100/32
+ ip netns exec at_ns0 \
+ ip route add 10.1.1.200 dev veth0 via 172.16.1.200 \
+ src 10.1.1.100
+
+ # root namespace
+ # at_ns0 -> root
+ ip xfrm state add src 172.16.1.100 dst 172.16.1.200 proto esp \
+ spi $spi_in_to_out reqid 1 mode tunnel \
+ auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc
+ ip xfrm policy add src 10.1.1.100/32 dst 10.1.1.200/32 dir in \
+ tmpl src 172.16.1.100 dst 172.16.1.200 proto esp reqid 1 \
+ mode tunnel
+ # root -> at_ns0
+ ip xfrm state add src 172.16.1.200 dst 172.16.1.100 proto esp \
+ spi $spi_out_to_in reqid 2 mode tunnel \
+ auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc
+ ip xfrm policy add src 10.1.1.200/32 dst 10.1.1.100/32 dir out \
+ tmpl src 172.16.1.200 dst 172.16.1.100 proto esp reqid 2 \
+ mode tunnel
+ # address & route
+ ip addr add dev veth1 10.1.1.200/32
+ ip route add 10.1.1.100 dev veth1 via 172.16.1.100 src 10.1.1.200
+}
+
+test_xfrm_tunnel()
+{
+ config_device
+ > /sys/kernel/debug/tracing/trace
+ setup_xfrm_tunnel
+ tc qdisc add dev veth1 clsact
+ tc filter add dev veth1 proto ip ingress bpf da obj test_tunnel_kern.o \
+ sec xfrm_get_state
+ ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+ sleep 1
+ grep "reqid 1" /sys/kernel/debug/tracing/trace
+ check_err $?
+ grep "spi 0x1" /sys/kernel/debug/tracing/trace
+ check_err $?
+ grep "remote ip 0xac100164" /sys/kernel/debug/tracing/trace
+ check_err $?
+ cleanup
+
+ if [ $ret -ne 0 ]; then
+ echo -e ${RED}"FAIL: xfrm tunnel"${NC}
+ return 1
+ fi
+ echo -e ${GREEN}"PASS: xfrm tunnel"${NC}
+}
+
+attach_bpf()
+{
+ DEV=$1
+ SET=$2
+ GET=$3
+ tc qdisc add dev $DEV clsact
+ tc filter add dev $DEV egress bpf da obj test_tunnel_kern.o sec $SET
+ tc filter add dev $DEV ingress bpf da obj test_tunnel_kern.o sec $GET
+}
+
+cleanup()
+{
+ ip netns delete at_ns0 2> /dev/null
+ ip link del veth1 2> /dev/null
+ ip link del ipip11 2> /dev/null
+ ip link del ipip6tnl11 2> /dev/null
+ ip link del ip6ip6tnl11 2> /dev/null
+ ip link del gretap11 2> /dev/null
+ ip link del ip6gre11 2> /dev/null
+ ip link del ip6gretap11 2> /dev/null
+ ip link del vxlan11 2> /dev/null
+ ip link del ip6vxlan11 2> /dev/null
+ ip link del geneve11 2> /dev/null
+ ip link del ip6geneve11 2> /dev/null
+ ip link del erspan11 2> /dev/null
+ ip link del ip6erspan11 2> /dev/null
+ ip xfrm policy delete dir out src 10.1.1.200/32 dst 10.1.1.100/32 2> /dev/null
+ ip xfrm policy delete dir in src 10.1.1.100/32 dst 10.1.1.200/32 2> /dev/null
+ ip xfrm state delete src 172.16.1.100 dst 172.16.1.200 proto esp spi 0x1 2> /dev/null
+ ip xfrm state delete src 172.16.1.200 dst 172.16.1.100 proto esp spi 0x2 2> /dev/null
+}
+
+cleanup_exit()
+{
+ echo "CATCH SIGKILL or SIGINT, cleanup and exit"
+ cleanup
+ exit 0
+}
+
+check()
+{
+ ip link help 2>&1 | grep -q "\s$1\s"
+ if [ $? -ne 0 ];then
+ echo "SKIP $1: iproute2 not support"
+ cleanup
+ return 1
+ fi
+}
+
+enable_debug()
+{
+ echo 'file ip_gre.c +p' > /sys/kernel/debug/dynamic_debug/control
+ echo 'file ip6_gre.c +p' > /sys/kernel/debug/dynamic_debug/control
+ echo 'file vxlan.c +p' > /sys/kernel/debug/dynamic_debug/control
+ echo 'file geneve.c +p' > /sys/kernel/debug/dynamic_debug/control
+ echo 'file ipip.c +p' > /sys/kernel/debug/dynamic_debug/control
+}
+
+check_err()
+{
+ if [ $ret -eq 0 ]; then
+ ret=$1
+ fi
+}
+
+bpf_tunnel_test()
+{
+ local errors=0
+
+ echo "Testing GRE tunnel..."
+ test_gre
+ errors=$(( $errors + $? ))
+
+ echo "Testing IP6GRE tunnel..."
+ test_ip6gre
+ errors=$(( $errors + $? ))
+
+ echo "Testing IP6GRETAP tunnel..."
+ test_ip6gretap
+ errors=$(( $errors + $? ))
+
+ echo "Testing ERSPAN tunnel..."
+ test_erspan v2
+ errors=$(( $errors + $? ))
+
+ echo "Testing IP6ERSPAN tunnel..."
+ test_ip6erspan v2
+ errors=$(( $errors + $? ))
+
+ echo "Testing VXLAN tunnel..."
+ test_vxlan
+ errors=$(( $errors + $? ))
+
+ echo "Testing IP6VXLAN tunnel..."
+ test_ip6vxlan
+ errors=$(( $errors + $? ))
+
+ echo "Testing GENEVE tunnel..."
+ test_geneve
+ errors=$(( $errors + $? ))
+
+ echo "Testing IP6GENEVE tunnel..."
+ test_ip6geneve
+ errors=$(( $errors + $? ))
+
+ echo "Testing IPIP tunnel..."
+ test_ipip
+ errors=$(( $errors + $? ))
+
+ echo "Testing IPIP6 tunnel..."
+ test_ipip6
+ errors=$(( $errors + $? ))
+
+ echo "Testing IP6IP6 tunnel..."
+ test_ip6ip6
+ errors=$(( $errors + $? ))
+
+ echo "Testing IPSec tunnel..."
+ test_xfrm_tunnel
+ errors=$(( $errors + $? ))
+
+ return $errors
+}
+
+trap cleanup 0 3 6
+trap cleanup_exit 2 9
+
+cleanup
+bpf_tunnel_test
+
+if [ $? -ne 0 ]; then
+ echo -e "$(basename $0): ${RED}FAIL${NC}"
+ exit 1
+fi
+echo -e "$(basename $0): ${GREEN}PASS${NC}"
+exit 0