ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/uboot/arch/powerpc/cpu/mpc5xx/cpu.c b/marvell/uboot/arch/powerpc/cpu/mpc5xx/cpu.c
new file mode 100644
index 0000000..cfcf633
--- /dev/null
+++ b/marvell/uboot/arch/powerpc/cpu/mpc5xx/cpu.c
@@ -0,0 +1,156 @@
+/*
+ * (C) Copyright 2003
+ * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * File: cpu.c
+ *
+ * Discription: Some cpu specific function for watchdog,
+ * cpu version test, clock setting ...
+ *
+ */
+
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <mpc5xx.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if (defined(CONFIG_MPC555))
+# define ID_STR "MPC555/556"
+
+/*
+ * Check version of cpu with Processor Version Register (PVR)
+ */
+static int check_cpu_version (long clock, uint pvr, uint immr)
+{
+ char buf[32];
+ /* The highest 16 bits should be 0x0002 for a MPC555/556 */
+ if ((pvr >> 16) == 0x0002) {
+ printf (" " ID_STR " Version %x", (pvr >> 16));
+ printf (" at %s MHz:", strmhz (buf, clock));
+ } else {
+ printf ("Not supported cpu version");
+ return -1;
+ }
+ return 0;
+}
+#endif /* CONFIG_MPC555 */
+
+
+/*
+ * Check version of mpc5xx
+ */
+int checkcpu (void)
+{
+ ulong clock = gd->cpu_clk;
+ uint immr = get_immr (0); /* Return full IMMR contents */
+ uint pvr = get_pvr (); /* Retrieve PVR register */
+
+ puts ("CPU: ");
+
+ return check_cpu_version (clock, pvr, immr);
+}
+
+/*
+ * Called by macro WATCHDOG_RESET
+ */
+#if defined(CONFIG_WATCHDOG)
+void watchdog_reset (void)
+{
+ int re_enable = disable_interrupts ();
+
+ reset_5xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
+ if (re_enable)
+ enable_interrupts ();
+}
+
+/*
+ * Will clear software reset
+ */
+void reset_5xx_watchdog (volatile immap_t * immr)
+{
+ /* Use the MPC5xx Internal Watchdog */
+ immr->im_siu_conf.sc_swsr = 0x556c; /* Prevent SW time-out */
+ immr->im_siu_conf.sc_swsr = 0xaa39;
+}
+
+#endif /* CONFIG_WATCHDOG */
+
+
+/*
+ * Get timebase clock frequency
+ */
+unsigned long get_tbclk (void)
+{
+ volatile immap_t *immr = (volatile immap_t *) CONFIG_SYS_IMMR;
+ ulong oscclk, factor;
+
+ if (immr->im_clkrst.car_sccr & SCCR_TBS) {
+ return (gd->cpu_clk / 16);
+ }
+
+ factor = (((CONFIG_SYS_PLPRCR) & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT) + 1;
+
+ oscclk = gd->cpu_clk / factor;
+
+ if ((immr->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) {
+ return (oscclk / 4);
+ }
+ return (oscclk / 16);
+}
+
+void dcache_enable (void)
+{
+ return;
+}
+
+void dcache_disable (void)
+{
+ return;
+}
+
+int dcache_status (void)
+{
+ return 0; /* always off */
+}
+
+/*
+ * Reset board
+ */
+int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+{
+#if defined(CONFIG_PATI)
+ volatile ulong *addr = (ulong *) CONFIG_SYS_RESET_ADDRESS;
+ *addr = 1;
+#else
+ ulong addr;
+
+ /* Interrupts off, enable reset */
+ __asm__ volatile (" mtspr 81, %r0 \n\t"
+ " mfmsr %r3 \n\t"
+ " rlwinm %r31,%r3,0,25,23\n\t"
+ " mtmsr %r31 \n\t");
+ /*
+ * Trying to execute the next instruction at a non-existing address
+ * should cause a machine check, resulting in reset
+ */
+#ifdef CONFIG_SYS_RESET_ADDRESS
+ addr = CONFIG_SYS_RESET_ADDRESS;
+#else
+ /*
+ * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE * - sizeof (ulong) is usually a valid address. Better pick an address
+ * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
+ * "(ulong)-1" used to be a good choice for many systems...
+ */
+ addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
+#endif
+ ((void (*) (void)) addr) ();
+#endif /* #if defined(CONFIG_PATI) */
+ return 1;
+}