ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/uboot/arch/powerpc/cpu/mpc85xx/cpu.c b/marvell/uboot/arch/powerpc/cpu/mpc85xx/cpu.c
new file mode 100644
index 0000000..3e99b07
--- /dev/null
+++ b/marvell/uboot/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -0,0 +1,618 @@
+/*
+ * Copyright 2004,2007-2011 Freescale Semiconductor, Inc.
+ * (C) Copyright 2002, 2003 Motorola Inc.
+ * Xianghua Xiao (X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <fsl_esdhc.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <fsl_ifc.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_lbc.h>
+#include <post.h>
+#include <asm/processor.h>
+#include <fsl_ddr_sdram.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Default board reset function
+ */
+static void
+__board_reset(void)
+{
+ /* Do nothing */
+}
+void board_reset(void) __attribute__((weak, alias("__board_reset")));
+
+int checkcpu (void)
+{
+ sys_info_t sysinfo;
+ uint pvr, svr;
+ uint ver;
+ uint major, minor;
+ struct cpu_type *cpu;
+ char buf1[32], buf2[32];
+#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET)
+ ccsr_gur_t __iomem *gur =
+ (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#endif
+
+ /*
+ * Cornet platforms use ddr sync bit in RCW to indicate sync vs async
+ * mode. Previous platform use ddr ratio to do the same. This
+ * information is only for display here.
+ */
+#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ u32 ddr_sync = 0; /* only async mode is supported */
+#else
+ u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
+ >> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+#else /* CONFIG_FSL_CORENET */
+#ifdef CONFIG_DDR_CLK_FREQ
+ u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+ >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
+#else
+ u32 ddr_ratio = 0;
+#endif /* CONFIG_DDR_CLK_FREQ */
+#endif /* CONFIG_FSL_CORENET */
+
+ unsigned int i, core, nr_cores = cpu_numcores();
+ u32 mask = cpu_mask();
+
+ svr = get_svr();
+ major = SVR_MAJ(svr);
+ minor = SVR_MIN(svr);
+
+ if (cpu_numcores() > 1) {
+#ifndef CONFIG_MP
+ puts("Unicore software on multiprocessor system!!\n"
+ "To enable mutlticore build define CONFIG_MP\n");
+#endif
+ volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
+ printf("CPU%d: ", pic->whoami);
+ } else {
+ puts("CPU: ");
+ }
+
+ cpu = gd->arch.cpu;
+
+ puts(cpu->name);
+ if (IS_E_PROCESSOR(svr))
+ puts("E");
+
+ printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
+
+ pvr = get_pvr();
+ ver = PVR_VER(pvr);
+ major = PVR_MAJ(pvr);
+ minor = PVR_MIN(pvr);
+
+ printf("Core: ");
+ switch(ver) {
+ case PVR_VER_E500_V1:
+ case PVR_VER_E500_V2:
+ puts("e500");
+ break;
+ case PVR_VER_E500MC:
+ puts("e500mc");
+ break;
+ case PVR_VER_E5500:
+ puts("e5500");
+ break;
+ case PVR_VER_E6500:
+ puts("e6500");
+ break;
+ default:
+ puts("Unknown");
+ break;
+ }
+
+ printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
+
+ if (nr_cores > CONFIG_MAX_CPUS) {
+ panic("\nUnexpected number of cores: %d, max is %d\n",
+ nr_cores, CONFIG_MAX_CPUS);
+ }
+
+ get_sys_info(&sysinfo);
+
+ puts("Clock Configuration:");
+ for_each_cpu(i, core, nr_cores, mask) {
+ if (!(i & 3))
+ printf ("\n ");
+ printf("CPU%d:%-4s MHz, ", core,
+ strmhz(buf1, sysinfo.freq_processor[core]));
+ }
+ printf("\n CCB:%-4s MHz,", strmhz(buf1, sysinfo.freq_systembus));
+ printf("\n");
+
+#ifdef CONFIG_FSL_CORENET
+ if (ddr_sync == 1) {
+ printf(" DDR:%-4s MHz (%s MT/s data rate) "
+ "(Synchronous), ",
+ strmhz(buf1, sysinfo.freq_ddrbus/2),
+ strmhz(buf2, sysinfo.freq_ddrbus));
+ } else {
+ printf(" DDR:%-4s MHz (%s MT/s data rate) "
+ "(Asynchronous), ",
+ strmhz(buf1, sysinfo.freq_ddrbus/2),
+ strmhz(buf2, sysinfo.freq_ddrbus));
+ }
+#else
+ switch (ddr_ratio) {
+ case 0x0:
+ printf(" DDR:%-4s MHz (%s MT/s data rate), ",
+ strmhz(buf1, sysinfo.freq_ddrbus/2),
+ strmhz(buf2, sysinfo.freq_ddrbus));
+ break;
+ case 0x7:
+ printf(" DDR:%-4s MHz (%s MT/s data rate) "
+ "(Synchronous), ",
+ strmhz(buf1, sysinfo.freq_ddrbus/2),
+ strmhz(buf2, sysinfo.freq_ddrbus));
+ break;
+ default:
+ printf(" DDR:%-4s MHz (%s MT/s data rate) "
+ "(Asynchronous), ",
+ strmhz(buf1, sysinfo.freq_ddrbus/2),
+ strmhz(buf2, sysinfo.freq_ddrbus));
+ break;
+ }
+#endif
+
+#if defined(CONFIG_FSL_LBC)
+ if (sysinfo.freq_localbus > LCRR_CLKDIV) {
+ printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
+ } else {
+ printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
+ sysinfo.freq_localbus);
+ }
+#endif
+
+#if defined(CONFIG_FSL_IFC)
+ printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
+#endif
+
+#ifdef CONFIG_CPM2
+ printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freq_systembus));
+#endif
+
+#ifdef CONFIG_QE
+ printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freq_qe));
+#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+ for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) {
+ printf(" FMAN%d: %s MHz\n", i + 1,
+ strmhz(buf1, sysinfo.freq_fman[i]));
+ }
+#endif
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freq_qman));
+#endif
+
+#ifdef CONFIG_SYS_DPAA_PME
+ printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freq_pme));
+#endif
+
+ puts("L1: D-cache 32 KiB enabled\n I-cache 32 KiB enabled\n");
+
+#ifdef CONFIG_FSL_CORENET
+ /* Display the RCW, so that no one gets confused as to what RCW
+ * we're actually using for this boot.
+ */
+ puts("Reset Configuration Word (RCW):");
+ for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
+ u32 rcw = in_be32(&gur->rcwsr[i]);
+
+ if ((i % 4) == 0)
+ printf("\n %08x:", i * 4);
+ printf(" %08x", rcw);
+ }
+ puts("\n");
+#endif
+
+ return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+/* Everything after the first generation of PQ3 parts has RSTCR */
+#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+ defined(CONFIG_MPC8555) || defined(CONFIG_MPC8560)
+ unsigned long val, msr;
+
+ /*
+ * Initiate hard reset in debug control register DBCR0
+ * Make sure MSR[DE] = 1. This only resets the core.
+ */
+ msr = mfmsr ();
+ msr |= MSR_DE;
+ mtmsr (msr);
+
+ val = mfspr(DBCR0);
+ val |= 0x70000000;
+ mtspr(DBCR0,val);
+#else
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+ /* Attempt board-specific reset */
+ board_reset();
+
+ /* Next try asserting HRESET_REQ */
+ out_be32(&gur->rstcr, 0x2);
+ udelay(100);
+#endif
+
+ return 1;
+}
+
+
+/*
+ * Get timebase clock frequency
+ */
+#ifndef CONFIG_SYS_FSL_TBCLK_DIV
+#define CONFIG_SYS_FSL_TBCLK_DIV 8
+#endif
+unsigned long get_tbclk (void)
+{
+ unsigned long tbclk_div = CONFIG_SYS_FSL_TBCLK_DIV;
+
+ return (gd->bus_clk + (tbclk_div >> 1)) / tbclk_div;
+}
+
+
+#if defined(CONFIG_WATCHDOG)
+void
+reset_85xx_watchdog(void)
+{
+ /*
+ * Clear TSR(WIS) bit by writing 1
+ */
+ mtspr(SPRN_TSR, TSR_WIS);
+}
+
+void
+watchdog_reset(void)
+{
+ int re_enable = disable_interrupts();
+
+ reset_85xx_watchdog();
+ if (re_enable)
+ enable_interrupts();
+}
+#endif /* CONFIG_WATCHDOG */
+
+/*
+ * Initializes on-chip MMC controllers.
+ * to override, implement board_mmc_init()
+ */
+int cpu_mmc_init(bd_t *bis)
+{
+#ifdef CONFIG_FSL_ESDHC
+ return fsl_esdhc_mmc_init(bis);
+#else
+ return 0;
+#endif
+}
+
+/*
+ * Print out the state of various machine registers.
+ * Currently prints out LAWs, BR0/OR0 for LBC, CSPR/CSOR/Timing
+ * parameters for IFC and TLBs
+ */
+void mpc85xx_reginfo(void)
+{
+ print_tlbcam();
+ print_laws();
+#if defined(CONFIG_FSL_LBC)
+ print_lbc_regs();
+#endif
+#ifdef CONFIG_FSL_IFC
+ print_ifc_regs();
+#endif
+
+}
+
+/* Common ddr init for non-corenet fsl 85xx platforms */
+#ifndef CONFIG_FSL_CORENET
+#if (defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)) && \
+ !defined(CONFIG_SYS_INIT_L2_ADDR)
+phys_size_t initdram(int board_type)
+{
+#if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD)
+ return fsl_ddr_sdram_size();
+#else
+ return (phys_size_t)CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+#endif
+}
+#else /* CONFIG_SYS_RAMBOOT */
+phys_size_t initdram(int board_type)
+{
+ phys_size_t dram_size = 0;
+
+#if defined(CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN)
+ {
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ unsigned int x = 10;
+ unsigned int i;
+
+ /*
+ * Work around to stabilize DDR DLL
+ */
+ out_be32(&gur->ddrdllcr, 0x81000000);
+ asm("sync;isync;msync");
+ udelay(200);
+ while (in_be32(&gur->ddrdllcr) != 0x81000100) {
+ setbits_be32(&gur->devdisr, 0x00010000);
+ for (i = 0; i < x; i++)
+ ;
+ clrbits_be32(&gur->devdisr, 0x00010000);
+ x++;
+ }
+ }
+#endif
+
+#if defined(CONFIG_SPD_EEPROM) || \
+ defined(CONFIG_DDR_SPD) || \
+ defined(CONFIG_SYS_DDR_RAW_TIMING)
+ dram_size = fsl_ddr_sdram();
+#else
+ dram_size = fixed_sdram();
+#endif
+ dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+ dram_size *= 0x100000;
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ /*
+ * Initialize and enable DDR ECC.
+ */
+ ddr_enable_ecc(dram_size);
+#endif
+
+#if defined(CONFIG_FSL_LBC)
+ /* Some boards also have sdram on the lbc */
+ lbc_sdram_init();
+#endif
+
+ debug("DDR: ");
+ return dram_size;
+}
+#endif /* CONFIG_SYS_RAMBOOT */
+#endif
+
+#if CONFIG_POST & CONFIG_SYS_POST_MEMORY
+
+/* Board-specific functions defined in each board's ddr.c */
+void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
+ unsigned int ctrl_num);
+void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn,
+ phys_addr_t *rpn);
+unsigned int
+ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg);
+
+void clear_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg);
+
+static void dump_spd_ddr_reg(void)
+{
+ int i, j, k, m;
+ u8 *p_8;
+ u32 *p_32;
+ struct ccsr_ddr __iomem *ddr[CONFIG_NUM_DDR_CONTROLLERS];
+ generic_spd_eeprom_t
+ spd[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR];
+
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
+ fsl_ddr_get_spd(spd[i], i);
+
+ puts("SPD data of all dimms (zero vaule is omitted)...\n");
+ puts("Byte (hex) ");
+ k = 1;
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++)
+ printf("Dimm%d ", k++);
+ }
+ puts("\n");
+ for (k = 0; k < sizeof(generic_spd_eeprom_t); k++) {
+ m = 0;
+ printf("%3d (0x%02x) ", k, k);
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+ p_8 = (u8 *) &spd[i][j];
+ if (p_8[k]) {
+ printf("0x%02x ", p_8[k]);
+ m++;
+ } else
+ puts(" ");
+ }
+ }
+ if (m)
+ puts("\n");
+ else
+ puts("\r");
+ }
+
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ switch (i) {
+ case 0:
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+ break;
+#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+ case 1:
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
+ break;
+#endif
+#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+ case 2:
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
+ break;
+#endif
+#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+ case 3:
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
+ break;
+#endif
+ default:
+ printf("%s unexpected controller number = %u\n",
+ __func__, i);
+ return;
+ }
+ }
+ printf("DDR registers dump for all controllers "
+ "(zero vaule is omitted)...\n");
+ puts("Offset (hex) ");
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
+ printf(" Base + 0x%04x", (u32)ddr[i] & 0xFFFF);
+ puts("\n");
+ for (k = 0; k < sizeof(struct ccsr_ddr)/4; k++) {
+ m = 0;
+ printf("%6d (0x%04x)", k * 4, k * 4);
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ p_32 = (u32 *) ddr[i];
+ if (p_32[k]) {
+ printf(" 0x%08x", p_32[k]);
+ m++;
+ } else
+ puts(" ");
+ }
+ if (m)
+ puts("\n");
+ else
+ puts("\r");
+ }
+ puts("\n");
+}
+
+/* invalid the TLBs for DDR and setup new ones to cover p_addr */
+static int reset_tlb(phys_addr_t p_addr, u32 size, phys_addr_t *phys_offset)
+{
+ u32 vstart = CONFIG_SYS_DDR_SDRAM_BASE;
+ unsigned long epn;
+ u32 tsize, valid, ptr;
+ int ddr_esel;
+
+ clear_ddr_tlbs_phys(p_addr, size>>20);
+
+ /* Setup new tlb to cover the physical address */
+ setup_ddr_tlbs_phys(p_addr, size>>20);
+
+ ptr = vstart;
+ ddr_esel = find_tlb_idx((void *)ptr, 1);
+ if (ddr_esel != -1) {
+ read_tlbcam_entry(ddr_esel, &valid, &tsize, &epn, phys_offset);
+ } else {
+ printf("TLB error in function %s\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * slide the testing window up to test another area
+ * for 32_bit system, the maximum testable memory is limited to
+ * CONFIG_MAX_MEM_MAPPED
+ */
+int arch_memory_test_advance(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
+{
+ phys_addr_t test_cap, p_addr;
+ phys_size_t p_size = min(gd->ram_size, CONFIG_MAX_MEM_MAPPED);
+
+#if !defined(CONFIG_PHYS_64BIT) || \
+ !defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS) || \
+ (CONFIG_SYS_INIT_RAM_ADDR_PHYS < 0x100000000ull)
+ test_cap = p_size;
+#else
+ test_cap = gd->ram_size;
+#endif
+ p_addr = (*vstart) + (*size) + (*phys_offset);
+ if (p_addr < test_cap - 1) {
+ p_size = min(test_cap - p_addr, CONFIG_MAX_MEM_MAPPED);
+ if (reset_tlb(p_addr, p_size, phys_offset) == -1)
+ return -1;
+ *vstart = CONFIG_SYS_DDR_SDRAM_BASE;
+ *size = (u32) p_size;
+ printf("Testing 0x%08llx - 0x%08llx\n",
+ (u64)(*vstart) + (*phys_offset),
+ (u64)(*vstart) + (*phys_offset) + (*size) - 1);
+ } else
+ return 1;
+
+ return 0;
+}
+
+/* initialization for testing area */
+int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
+{
+ phys_size_t p_size = min(gd->ram_size, CONFIG_MAX_MEM_MAPPED);
+
+ *vstart = CONFIG_SYS_DDR_SDRAM_BASE;
+ *size = (u32) p_size; /* CONFIG_MAX_MEM_MAPPED < 4G */
+ *phys_offset = 0;
+
+#if !defined(CONFIG_PHYS_64BIT) || \
+ !defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS) || \
+ (CONFIG_SYS_INIT_RAM_ADDR_PHYS < 0x100000000ull)
+ if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) {
+ puts("Cannot test more than ");
+ print_size(CONFIG_MAX_MEM_MAPPED,
+ " without proper 36BIT support.\n");
+ }
+#endif
+ printf("Testing 0x%08llx - 0x%08llx\n",
+ (u64)(*vstart) + (*phys_offset),
+ (u64)(*vstart) + (*phys_offset) + (*size) - 1);
+
+ return 0;
+}
+
+/* invalid TLBs for DDR and remap as normal after testing */
+int arch_memory_test_cleanup(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
+{
+ unsigned long epn;
+ u32 tsize, valid, ptr;
+ phys_addr_t rpn = 0;
+ int ddr_esel;
+
+ /* disable the TLBs for this testing */
+ ptr = *vstart;
+
+ while (ptr < (*vstart) + (*size)) {
+ ddr_esel = find_tlb_idx((void *)ptr, 1);
+ if (ddr_esel != -1) {
+ read_tlbcam_entry(ddr_esel, &valid, &tsize, &epn, &rpn);
+ disable_tlb(ddr_esel);
+ }
+ ptr += TSIZE_TO_BYTES(tsize);
+ }
+
+ puts("Remap DDR ");
+ setup_ddr_tlbs(gd->ram_size>>20);
+ puts("\n");
+
+ return 0;
+}
+
+void arch_memory_failure_handle(void)
+{
+ dump_spd_ddr_reg();
+}
+#endif