ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/uboot/arch/powerpc/cpu/mpc85xx/interrupts.c b/marvell/uboot/arch/powerpc/cpu/mpc85xx/interrupts.c
new file mode 100644
index 0000000..a36a4af
--- /dev/null
+++ b/marvell/uboot/arch/powerpc/cpu/mpc85xx/interrupts.c
@@ -0,0 +1,110 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 (440 port)
+ * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
+ *
+ * (C) Copyright 2003 Motorola Inc. (MPC85xx port)
+ * Xianghua Xiao (X.Xiao@motorola.com)
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#ifdef CONFIG_POST
+#include <post.h>
+#endif
+
+int interrupt_init_cpu(unsigned int *decrementer_count)
+{
+ ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC8xxx_PIC_ADDR;
+
+#ifdef CONFIG_POST
+ /*
+ * The POST word is stored in the PIC's TFRR register which gets
+ * cleared when the PIC is reset. Save it off so we can restore it
+ * later.
+ */
+ ulong post_word = post_word_load();
+#endif
+
+ out_be32(&pic->gcr, MPC85xx_PICGCR_RST);
+ while (in_be32(&pic->gcr) & MPC85xx_PICGCR_RST)
+ ;
+ out_be32(&pic->gcr, MPC85xx_PICGCR_M);
+ in_be32(&pic->gcr);
+
+ *decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
+
+ /* PIE is same as DIE, dec interrupt enable */
+ mtspr(SPRN_TCR, TCR_PIE);
+
+#ifdef CONFIG_INTERRUPTS
+ pic->iivpr1 = 0x810001; /* 50220 enable ecm interrupts */
+ debug("iivpr1@%x = %x\n", (uint)&pic->iivpr1, pic->iivpr1);
+
+ pic->iivpr2 = 0x810002; /* 50240 enable ddr interrupts */
+ debug("iivpr2@%x = %x\n", (uint)&pic->iivpr2, pic->iivpr2);
+
+ pic->iivpr3 = 0x810003; /* 50260 enable lbc interrupts */
+ debug("iivpr3@%x = %x\n", (uint)&pic->iivpr3, pic->iivpr3);
+
+#ifdef CONFIG_PCI1
+ pic->iivpr8 = 0x810008; /* enable pci1 interrupts */
+ debug("iivpr8@%x = %x\n", (uint)&pic->iivpr8, pic->iivpr8);
+#endif
+#if defined(CONFIG_PCI2) || defined(CONFIG_PCIE2)
+ pic->iivpr9 = 0x810009; /* enable pci1 interrupts */
+ debug("iivpr9@%x = %x\n", (uint)&pic->iivpr9, pic->iivpr9);
+#endif
+#ifdef CONFIG_PCIE1
+ pic->iivpr10 = 0x81000a; /* enable pcie1 interrupts */
+ debug("iivpr10@%x = %x\n", (uint)&pic->iivpr10, pic->iivpr10);
+#endif
+#ifdef CONFIG_PCIE3
+ pic->iivpr11 = 0x81000b; /* enable pcie3 interrupts */
+ debug("iivpr11@%x = %x\n", (uint)&pic->iivpr11, pic->iivpr11);
+#endif
+
+ pic->ctpr=0; /* 40080 clear current task priority register */
+#endif
+
+#ifdef CONFIG_POST
+ post_word_store(post_word);
+#endif
+
+ return (0);
+}
+
+/* Install and free a interrupt handler. Not implemented yet. */
+
+void
+irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
+{
+ return;
+}
+
+void
+irq_free_handler(int vec)
+{
+ return;
+}
+
+void timer_interrupt_cpu(struct pt_regs *regs)
+{
+ /* PIS is same as DIS, dec interrupt status */
+ mtspr(SPRN_TSR, TSR_PIS);
+}
+
+#if defined(CONFIG_CMD_IRQ)
+/* irqinfo - print information about PCI devices,not implemented. */
+int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ return 0;
+}
+#endif