ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/uboot/arch/sparc/cpu/leon2/cpu_init.c b/marvell/uboot/arch/sparc/cpu/leon2/cpu_init.c
new file mode 100644
index 0000000..de310fb
--- /dev/null
+++ b/marvell/uboot/arch/sparc/cpu/leon2/cpu_init.c
@@ -0,0 +1,125 @@
+/* Initializes CPU and basic hardware such as memory
+ * controllers, IRQ controller and system timer 0.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/asi.h>
+#include <asm/leon.h>
+
+#include <config.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* reset CPU (jump to 0, without reset) */
+void start(void);
+
+struct {
+ gd_t gd_area;
+ bd_t bd;
+} global_data;
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers.
+ *
+ * Run from FLASH/PROM:
+ * - until memory controller is set up, only registers available
+ * - no global variables available for writing
+ * - constants available
+ */
+
+void cpu_init_f(void)
+{
+ LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
+
+ /* initialize the IRQMP */
+ leon2->Interrupt_Force = 0;
+ leon2->Interrupt_Pending = 0;
+ leon2->Interrupt_Clear = 0xfffe; /* clear all old pending interrupts */
+ leon2->Interrupt_Mask = 0xfffe0000; /* mask all IRQs */
+
+ /* cache */
+
+ /* I/O port setup */
+#ifdef LEON2_IO_PORT_DIR
+ leon2->PIO_Direction = LEON2_IO_PORT_DIR;
+#endif
+#ifdef LEON2_IO_PORT_DATA
+ leon2->PIO_Data = LEON2_IO_PORT_DATA;
+#endif
+#ifdef LEON2_IO_PORT_INT
+ leon2->PIO_Interrupt = LEON2_IO_PORT_INT;
+#else
+ leon2->PIO_Interrupt = 0;
+#endif
+}
+
+void cpu_init_f2(void)
+{
+
+}
+
+/*
+ * initialize higher level parts of CPU like time base and timers
+ */
+int cpu_init_r(void)
+{
+ LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
+
+ /* initialize prescaler common to all timers to 1MHz */
+ leon2->Scaler_Counter = leon2->Scaler_Reload =
+ (((CONFIG_SYS_CLK_FREQ / 1000) + 500) / 1000) - 1;
+
+ return (0);
+}
+
+/* Uses Timer 0 to get accurate
+ * pauses. Max 2 raised to 32 ticks
+ *
+ */
+void cpu_wait_ticks(unsigned long ticks)
+{
+ unsigned long start = get_timer(0);
+ while (get_timer(start) < ticks) ;
+}
+
+/* initiate and setup timer0 interrupt to 1MHz
+ * Return irq number for timer int or a negative number for
+ * dealing with self
+ */
+int timer_interrupt_init_cpu(void)
+{
+ LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
+
+ /* 1ms ticks */
+ leon2->Timer_Counter_1 = 0;
+ leon2->Timer_Reload_1 = 999; /* (((1000000 / 100) - 1)) */
+ leon2->Timer_Control_1 =
+ (LEON2_TIMER_CTRL_EN | LEON2_TIMER_CTRL_RS | LEON2_TIMER_CTRL_LD);
+
+ return LEON2_TIMER1_IRQNO;
+}
+
+/*
+ * This function is intended for SHORT delays only.
+ */
+unsigned long cpu_usec2ticks(unsigned long usec)
+{
+ /* timer set to 1kHz ==> 1 clk tick = 1 msec */
+ if (usec < 1000)
+ return 1;
+ return (usec / 1000);
+}
+
+unsigned long cpu_ticks2usec(unsigned long ticks)
+{
+ /* 1tick = 1usec */
+ return ticks * 1000;
+}