ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/uboot/arch/x86/lib/pcat_interrupts.c b/marvell/uboot/arch/x86/lib/pcat_interrupts.c
new file mode 100644
index 0000000..4c86f7f
--- /dev/null
+++ b/marvell/uboot/arch/x86/lib/pcat_interrupts.c
@@ -0,0 +1,116 @@
+/*
+ * (C) Copyright 2009
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * This file provides the interrupt handling functionality for systems
+ * based on the standard PC/AT architecture using two cascaded i8259
+ * Programmable Interrupt Controllers.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/i8259.h>
+#include <asm/ibmpc.h>
+#include <asm/interrupt.h>
+
+#if CONFIG_SYS_NUM_IRQS != 16
+#error "CONFIG_SYS_NUM_IRQS must equal 16 if CONFIG_SYS_NUM_IRQS is defined"
+#endif
+
+int interrupt_init(void)
+{
+ u8 i;
+
+ disable_interrupts();
+
+ /* Mask all interrupts */
+ outb(0xff, MASTER_PIC + IMR);
+ outb(0xff, SLAVE_PIC + IMR);
+
+ /* Master PIC */
+ /* Place master PIC interrupts at INT20 */
+ /* ICW3, One slave PIC is present */
+ outb(ICW1_SEL|ICW1_EICW4, MASTER_PIC + ICW1);
+ outb(0x20, MASTER_PIC + ICW2);
+ outb(IR2, MASTER_PIC + ICW3);
+ outb(ICW4_PM, MASTER_PIC + ICW4);
+
+ for (i = 0; i < 8; i++)
+ outb(OCW2_SEOI | i, MASTER_PIC + OCW2);
+
+ /* Slave PIC */
+ /* Place slave PIC interrupts at INT28 */
+ /* Slave ID */
+ outb(ICW1_SEL|ICW1_EICW4, SLAVE_PIC + ICW1);
+ outb(0x28, SLAVE_PIC + ICW2);
+ outb(0x02, SLAVE_PIC + ICW3);
+ outb(ICW4_PM, SLAVE_PIC + ICW4);
+
+ for (i = 0; i < 8; i++)
+ outb(OCW2_SEOI | i, SLAVE_PIC + OCW2);
+
+ /*
+ * Enable cascaded interrupts by unmasking the cascade IRQ pin of
+ * the master PIC
+ */
+ unmask_irq(2);
+
+ enable_interrupts();
+
+ return 0;
+}
+
+void mask_irq(int irq)
+{
+ int imr_port;
+
+ if (irq >= CONFIG_SYS_NUM_IRQS)
+ return;
+
+ if (irq > 7)
+ imr_port = SLAVE_PIC + IMR;
+ else
+ imr_port = MASTER_PIC + IMR;
+
+ outb(inb(imr_port) | (1 << (irq & 7)), imr_port);
+}
+
+void unmask_irq(int irq)
+{
+ int imr_port;
+
+ if (irq >= CONFIG_SYS_NUM_IRQS)
+ return;
+
+ if (irq > 7)
+ imr_port = SLAVE_PIC + IMR;
+ else
+ imr_port = MASTER_PIC + IMR;
+
+ outb(inb(imr_port) & ~(1 << (irq & 7)), imr_port);
+}
+
+void specific_eoi(int irq)
+{
+ if (irq >= CONFIG_SYS_NUM_IRQS)
+ return;
+
+ if (irq > 7) {
+ /*
+ * IRQ is on the slave - Issue a corresponding EOI to the
+ * slave PIC and an EOI for IRQ2 (the cascade interrupt)
+ * on the master PIC
+ */
+ outb(OCW2_SEOI | (irq & 7), SLAVE_PIC + OCW2);
+ irq = SEOI_IR2;
+ }
+
+ outb(OCW2_SEOI | irq, MASTER_PIC + OCW2);
+}