ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/uboot/board/mousse/flash.c b/marvell/uboot/board/mousse/flash.c
new file mode 100644
index 0000000..acedcb1
--- /dev/null
+++ b/marvell/uboot/board/mousse/flash.c
@@ -0,0 +1,917 @@
+/*
+ * MOUSSE/MPC8240 Board definitions.
+ * Flash Routines for MOUSSE onboard AMD29LV106DB devices
+ *
+ * (C) Copyright 2000
+ * Marius Groeger <mgroeger@sysgo.de>
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp.
+ * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include <malloc.h>
+#include "mousse.h"
+#include "flash.h"
+
+int flashLibDebug = 0;
+int flashLibInited = 0;
+
+#define OK 0
+#define ERROR -1
+#define STATUS int
+#define PRINTF if (flashLibDebug) printf
+#if 0
+#define PRIVATE static
+#else
+#define PRIVATE
+#endif
+
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
+
+#define SLEEP_DELAY 166
+#define FLASH_SECTOR_SIZE (64*1024)
+/***********************************************************************
+ *
+ * Virtual Flash Devices on Mousse board
+ *
+ * These must be kept in sync with the definitions in flashLib.h.
+ *
+ ***********************************************************************/
+
+PRIVATE flash_dev_t flashDev[] = {
+ /* Bank 0 sector SA0 (16 kB) */
+ { "SA0",FLASH0_BANK, FLASH0_SEG0_START, 1, 14,
+ FLASH0_VENDOR_ID, FLASH0_DEVICE_ID
+ },
+ /* Bank 0 sector SA1 (8 kB) */
+ { "SA1", FLASH0_BANK, FLASH0_SEG0_START + 0x4000, 1, 13,
+ FLASH0_VENDOR_ID, FLASH0_DEVICE_ID
+ },
+ /* Bank 0 sector SA2 (8 kB) */
+ { "SA2", FLASH0_BANK, FLASH0_SEG0_START + 0x6000, 1, 13,
+ FLASH0_VENDOR_ID, FLASH0_DEVICE_ID
+ },
+ /* Bank 0 sector SA3 is occluded by Mousse I/O devices */
+ /* Bank 0 sectors SA4-SA18, after Mousse devices up to PLCC (960 kB) */
+ { "KERNEL", FLASH0_BANK, FLASH0_SEG1_START, 15, 16,
+ FLASH0_VENDOR_ID, FLASH0_DEVICE_ID
+ },
+ /* Bank 0 sectors SA19-SA26, jumper can occlude this by PLCC (512 kB) */
+ /* This is where the Kahlua boot vector and boot ROM code resides. */
+ { "BOOT",FLASH0_BANK, FLASH0_SEG2_START, 8, 16,
+ FLASH0_VENDOR_ID, FLASH0_DEVICE_ID
+ },
+ /* Bank 0 sectors SA27-SA34 (512 kB) */
+ { "RAMDISK",FLASH0_BANK, FLASH0_SEG3_START, 8, 16,
+ FLASH0_VENDOR_ID, FLASH0_DEVICE_ID
+ },
+};
+
+int flashDevCount = (sizeof (flashDev) / sizeof (flashDev[0]));
+
+#define DEV(no) (&flashDev[no])
+#define DEV_NO(dev) ((dev) - flashDev)
+
+/***********************************************************************
+ *
+ * Private Flash Routines
+ *
+ ***********************************************************************/
+
+/*
+ * The convention is:
+ *
+ * "addr" is always the PROM raw address, which is the address of an
+ * 8-bit quantity for flash 0 and 16-bit quantity for flash 1.
+ *
+ * "pos" is always a logical byte position from the PROM beginning.
+ */
+
+#define FLASH0_ADDR(dev, addr) \
+ ((unsigned char *) ((dev)->base + (addr)))
+
+#define FLASH0_WRITE(dev, addr, value) \
+ (*FLASH0_ADDR(dev, addr) = (value))
+
+#define FLASH0_READ(dev, addr) \
+ (*FLASH0_ADDR(dev, addr))
+
+PRIVATE int flashCheck (flash_dev_t * dev)
+{
+ if (!flashLibInited) {
+ printf ("flashCheck: flashLib not initialized\n");
+ return ERROR;
+ }
+
+ if (dev < &flashDev[0] || dev >= &flashDev[flashDevCount]) {
+ printf ("flashCheck: Bad dev parameter\n");
+ return ERROR;
+ }
+
+ if (!dev->found) {
+ printf ("flashCheck: Device %d not available\n", DEV_NO (dev));
+ return ERROR;
+ }
+
+ return OK;
+}
+
+PRIVATE void flashReset (flash_dev_t * dev)
+{
+ PRINTF ("flashReset: dev=%d\n", DEV_NO (dev));
+
+ if (dev->bank == FLASH0_BANK) {
+ FLASH0_WRITE (dev, 0x555, 0xaa);
+ FLASH0_WRITE (dev, 0xaaa, 0x55);
+ FLASH0_WRITE (dev, 0x555, 0xf0);
+ }
+
+ udelay (SLEEP_DELAY);
+
+ PRINTF ("flashReset: done\n");
+}
+
+PRIVATE int flashProbe (flash_dev_t * dev)
+{
+ int rv, deviceID, vendorID;
+
+ PRINTF ("flashProbe: dev=%d\n", DEV_NO (dev));
+
+ if (dev->bank != FLASH0_BANK) {
+ rv = ERROR;
+ goto DONE;
+ }
+
+ FLASH0_WRITE (dev, 0xaaa, 0xaa);
+ FLASH0_WRITE (dev, 0x555, 0x55);
+ FLASH0_WRITE (dev, 0xaaa, 0x90);
+
+ udelay (SLEEP_DELAY);
+
+ vendorID = FLASH0_READ (dev, 0);
+ deviceID = FLASH0_READ (dev, 2);
+
+ FLASH0_WRITE (dev, 0, 0xf0);
+
+ PRINTF ("flashProbe: vendor=0x%x device=0x%x\n", vendorID, deviceID);
+
+ if (vendorID == dev->vendorID && deviceID == dev->deviceID)
+ rv = OK;
+ else
+ rv = ERROR;
+
+ DONE:
+ PRINTF ("flashProbe: rv=%d\n", rv);
+
+ return rv;
+}
+
+PRIVATE int flashWait (flash_dev_t * dev, int addr, int expect, int erase)
+{
+ int rv = ERROR;
+ int i, data;
+ int polls;
+
+#if 0
+ PRINTF ("flashWait: dev=%d addr=0x%x expect=0x%x erase=%d\n",
+ DEV_NO (dev), addr, expect, erase);
+#endif
+
+ if (dev->bank != FLASH0_BANK) {
+ rv = ERROR;
+ goto done;
+ }
+
+ if (erase)
+ polls = FLASH_ERASE_SECTOR_TIMEOUT; /* Ticks */
+ else
+ polls = FLASH_PROGRAM_POLLS; /* Loops */
+
+ for (i = 0; i < polls; i++) {
+ if (erase)
+ udelay (SLEEP_DELAY);
+
+ data = FLASH0_READ (dev, addr);
+
+ if (((data ^ expect) & 0x80) == 0) {
+ rv = OK;
+ goto done;
+ }
+
+ if (data & 0x20) {
+ /*
+ * If the 0x20 bit has come on, it could actually be because
+ * the operation succeeded, so check the done bit again.
+ */
+
+ data = FLASH0_READ (dev, addr);
+
+ if (((data ^ expect) & 0x80) == 0) {
+ rv = OK;
+ goto done;
+ }
+
+ printf ("flashWait: Program error (dev: %d, addr: 0x%x)\n",
+ DEV_NO (dev), addr);
+
+ flashReset (dev);
+ rv = ERROR;
+ goto done;
+ }
+ }
+
+ printf ("flashWait: Timeout %s (dev: %d, addr: 0x%x)\n",
+ erase ? "erasing sector" : "programming byte",
+ DEV_NO (dev), addr);
+
+ done:
+
+#if 0
+ PRINTF ("flashWait: rv=%d\n", rv);
+#endif
+
+ return rv;
+}
+
+/***********************************************************************
+ *
+ * Public Flash Routines
+ *
+ ***********************************************************************/
+
+STATUS flashLibInit (void)
+{
+ int i;
+
+ PRINTF ("flashLibInit: devices=%d\n", flashDevCount);
+
+ for (i = 0; i < flashDevCount; i++) {
+ flash_dev_t *dev = &flashDev[i];
+
+ /*
+ * For bank 1, probe both without and with byte swappage,
+ * so that this module works on both old and new Mousse boards.
+ */
+
+ flashReset (dev);
+
+ if (flashProbe (dev) != ERROR)
+ dev->found = 1;
+
+ flashReset (dev);
+
+ if (flashProbe (dev) != ERROR)
+ dev->found = 1;
+
+ dev->swap = 0;
+
+ if (dev->found) {
+ PRINTF ("\n FLASH %s[%d]: iobase=0x%x - %d sectors %d KB",
+ flashDev[i].name, i, flashDev[i].base,
+ flashDev[i].sectors,
+ (flashDev[i].sectors * FLASH_SECTOR_SIZE) / 1024);
+
+ }
+ }
+
+ flashLibInited = 1;
+
+ PRINTF ("flashLibInit: done\n");
+
+ return OK;
+}
+
+STATUS flashEraseSector (flash_dev_t * dev, int sector)
+{
+ int pos, addr;
+
+ PRINTF ("flashErasesector: dev=%d sector=%d\n", DEV_NO (dev), sector);
+
+ if (flashCheck (dev) == ERROR)
+ return ERROR;
+
+ if (sector < 0 || sector >= dev->sectors) {
+ printf ("flashEraseSector: Sector out of range (dev: %d, sector: %d)\n", DEV_NO (dev), sector);
+ return ERROR;
+ }
+
+ pos = FLASH_SECTOR_POS (dev, sector);
+
+ if (dev->bank != FLASH0_BANK) {
+ return ERROR;
+ }
+
+ addr = pos;
+
+ FLASH0_WRITE (dev, 0xaaa, 0xaa);
+ FLASH0_WRITE (dev, 0x555, 0x55);
+ FLASH0_WRITE (dev, 0xaaa, 0x80);
+ FLASH0_WRITE (dev, 0xaaa, 0xaa);
+ FLASH0_WRITE (dev, 0x555, 0x55);
+ FLASH0_WRITE (dev, addr, 0x30);
+
+ return flashWait (dev, addr, 0xff, 1);
+}
+
+/*
+ * Note: it takes about as long to flash all sectors together with Chip
+ * Erase as it does to flash them one at a time (about 30 seconds for 2
+ * MB). Also since we want to be able to treat subsets of sectors as if
+ * they were complete devices, we don't use Chip Erase.
+ */
+
+STATUS flashErase (flash_dev_t * dev)
+{
+ int sector;
+
+ PRINTF ("flashErase: dev=%d sectors=%d\n", DEV_NO (dev), dev->sectors);
+
+ if (flashCheck (dev) == ERROR)
+ return ERROR;
+
+ for (sector = 0; sector < dev->sectors; sector++) {
+ if (flashEraseSector (dev, sector) == ERROR)
+ return ERROR;
+ }
+ return OK;
+}
+
+/*
+ * Read and write bytes
+ */
+
+STATUS flashRead (flash_dev_t * dev, int pos, char *buf, int len)
+{
+ int addr, words;
+
+ PRINTF ("flashRead: dev=%d pos=0x%x buf=0x%x len=0x%x\n",
+ DEV_NO (dev), pos, (int) buf, len);
+
+ if (flashCheck (dev) == ERROR)
+ return ERROR;
+
+ if (pos < 0 || len < 0 || pos + len > FLASH_MAX_POS (dev)) {
+ printf ("flashRead: Position out of range "
+ "(dev: %d, pos: 0x%x, len: 0x%x)\n",
+ DEV_NO (dev), pos, len);
+ return ERROR;
+ }
+
+ if (len == 0)
+ return OK;
+
+ if (dev->bank == FLASH0_BANK) {
+ addr = pos;
+ words = len;
+
+ PRINTF ("flashRead: memcpy(0x%x, 0x%x, 0x%x)\n",
+ (int) buf, (int) FLASH0_ADDR (dev, pos), len);
+
+ memcpy (buf, FLASH0_ADDR (dev, addr), words);
+
+ }
+ PRINTF ("flashRead: rv=OK\n");
+
+ return OK;
+}
+
+STATUS flashWrite (flash_dev_t * dev, int pos, char *buf, int len)
+{
+ int addr, words;
+
+ PRINTF ("flashWrite: dev=%d pos=0x%x buf=0x%x len=0x%x\n",
+ DEV_NO (dev), pos, (int) buf, len);
+
+ if (flashCheck (dev) == ERROR)
+ return ERROR;
+
+ if (pos < 0 || len < 0 || pos + len > FLASH_MAX_POS (dev)) {
+ printf ("flashWrite: Position out of range "
+ "(dev: %d, pos: 0x%x, len: 0x%x)\n",
+ DEV_NO (dev), pos, len);
+ return ERROR;
+ }
+
+ if (len == 0)
+ return OK;
+
+ if (dev->bank == FLASH0_BANK) {
+ unsigned char tmp;
+
+ addr = pos;
+ words = len;
+
+ while (words--) {
+ tmp = *buf;
+ if (~FLASH0_READ (dev, addr) & tmp) {
+ printf ("flashWrite: Attempt to program 0 to 1 "
+ "(dev: %d, addr: 0x%x, data: 0x%x)\n",
+ DEV_NO (dev), addr, tmp);
+ return ERROR;
+ }
+ FLASH0_WRITE (dev, 0xaaa, 0xaa);
+ FLASH0_WRITE (dev, 0x555, 0x55);
+ FLASH0_WRITE (dev, 0xaaa, 0xa0);
+ FLASH0_WRITE (dev, addr, tmp);
+ if (flashWait (dev, addr, tmp, 0) < 0)
+ return ERROR;
+ buf++;
+ addr++;
+ }
+ }
+
+ PRINTF ("flashWrite: rv=OK\n");
+
+ return OK;
+}
+
+/*
+ * flashWritable returns true if a range contains all F's.
+ */
+
+STATUS flashWritable (flash_dev_t * dev, int pos, int len)
+{
+ int addr, words;
+ int rv = ERROR;
+
+ PRINTF ("flashWritable: dev=%d pos=0x%x len=0x%x\n",
+ DEV_NO (dev), pos, len);
+
+ if (flashCheck (dev) == ERROR)
+ goto done;
+
+ if (pos < 0 || len < 0 || pos + len > FLASH_MAX_POS (dev)) {
+ printf ("flashWritable: Position out of range "
+ "(dev: %d, pos: 0x%x, len: 0x%x)\n",
+ DEV_NO (dev), pos, len);
+ goto done;
+ }
+
+ if (len == 0) {
+ rv = 1;
+ goto done;
+ }
+
+ if (dev->bank == FLASH0_BANK) {
+ addr = pos;
+ words = len;
+
+ while (words--) {
+ if (FLASH0_READ (dev, addr) != 0xff) {
+ rv = 0;
+ goto done;
+ }
+ addr++;
+ }
+ }
+
+ rv = 1;
+
+ done:
+ PRINTF ("flashWrite: rv=%d\n", rv);
+ return rv;
+}
+
+
+/*
+ * NOTE: the below code cannot run from FLASH!!!
+ */
+/***********************************************************************
+ *
+ * Flash Diagnostics
+ *
+ ***********************************************************************/
+
+STATUS flashDiag (flash_dev_t * dev)
+{
+ unsigned int *buf = 0;
+ int i, len, sector;
+ int rv = ERROR;
+
+ if (flashCheck (dev) == ERROR)
+ return ERROR;
+
+ printf ("flashDiag: Testing device %d, "
+ "base: 0x%x, %d sectors @ %d kB = %d kB\n",
+ DEV_NO (dev), dev->base,
+ dev->sectors,
+ 1 << (dev->lgSectorSize - 10),
+ dev->sectors << (dev->lgSectorSize - 10));
+
+ len = 1 << dev->lgSectorSize;
+
+ printf ("flashDiag: Erasing\n");
+
+ if (flashErase (dev) == ERROR) {
+ printf ("flashDiag: Erase failed\n");
+ goto done;
+ }
+ printf ("%d bytes requested ...\n", len);
+ buf = malloc (len);
+ printf ("allocated %d bytes ...\n", len);
+ if (buf == 0) {
+ printf ("flashDiag: Out of memory\n");
+ goto done;
+ }
+
+ /*
+ * Write unique counting pattern to each sector
+ */
+
+ for (sector = 0; sector < dev->sectors; sector++) {
+ printf ("flashDiag: Write sector %d\n", sector);
+
+ for (i = 0; i < len / 4; i++)
+ buf[i] = sector << 24 | i;
+
+ if (flashWrite (dev,
+ sector << dev->lgSectorSize,
+ (char *) buf, len) == ERROR) {
+ printf ("flashDiag: Write failed (dev: %d, sector: %d)\n",
+ DEV_NO (dev), sector);
+ goto done;
+ }
+ }
+
+ /*
+ * Verify
+ */
+
+ for (sector = 0; sector < dev->sectors; sector++) {
+ printf ("flashDiag: Verify sector %d\n", sector);
+
+ if (flashRead (dev,
+ sector << dev->lgSectorSize,
+ (char *) buf, len) == ERROR) {
+ printf ("flashDiag: Read failed (dev: %d, sector: %d)\n",
+ DEV_NO (dev), sector);
+ goto done;
+ }
+
+ for (i = 0; i < len / 4; i++) {
+ if (buf[i] != (sector << 24 | i)) {
+ printf ("flashDiag: Verify error "
+ "(dev: %d, sector: %d, offset: 0x%x)\n",
+ DEV_NO (dev), sector, i);
+ printf ("flashDiag: Expected 0x%08x, got 0x%08x\n",
+ sector << 24 | i, buf[i]);
+
+ goto done;
+ }
+ }
+ }
+
+ printf ("flashDiag: Erasing\n");
+
+ if (flashErase (dev) == ERROR) {
+ printf ("flashDiag: Final erase failed\n");
+ goto done;
+ }
+
+ rv = OK;
+
+ done:
+ if (buf)
+ free (buf);
+
+ if (rv == OK)
+ printf ("flashDiag: Device %d passed\n", DEV_NO (dev));
+ else
+ printf ("flashDiag: Device %d failed\n", DEV_NO (dev));
+
+ return rv;
+}
+
+STATUS flashDiagAll (void)
+{
+ int i;
+ int rv = OK;
+
+ PRINTF ("flashDiagAll: devices=%d\n", flashDevCount);
+
+ for (i = 0; i < flashDevCount; i++) {
+ flash_dev_t *dev = &flashDev[i];
+
+ if (dev->found && flashDiag (dev) == ERROR)
+ rv = ERROR;
+ }
+
+ if (rv == OK)
+ printf ("flashDiagAll: Passed\n");
+ else
+ printf ("flashDiagAll: Failed because of earlier errors\n");
+
+ return OK;
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+unsigned long flash_init (void)
+{
+ unsigned long size = 0;
+ flash_dev_t *dev = NULL;
+
+ flashLibInit ();
+
+ /*
+ * Provide info for FLASH (up to 960K) of Kernel Image data.
+ */
+ dev = FLASH_DEV_BANK0_LOW;
+ flash_info[FLASH_BANK_KERNEL].flash_id =
+ (dev->vendorID << 16) | dev->deviceID;
+ flash_info[FLASH_BANK_KERNEL].sector_count = dev->sectors;
+ flash_info[FLASH_BANK_KERNEL].size =
+ flash_info[FLASH_BANK_KERNEL].sector_count * FLASH_SECTOR_SIZE;
+ flash_info[FLASH_BANK_KERNEL].start[FIRST_SECTOR] = dev->base;
+ size += flash_info[FLASH_BANK_KERNEL].size;
+
+ /*
+ * Provide info for 512K PLCC FLASH ROM (U-Boot)
+ */
+ dev = FLASH_DEV_BANK0_BOOT;
+ flash_info[FLASH_BANK_BOOT].flash_id =
+ (dev->vendorID << 16) | dev->deviceID;
+ flash_info[FLASH_BANK_BOOT].sector_count = dev->sectors;
+ flash_info[FLASH_BANK_BOOT].size =
+ flash_info[FLASH_BANK_BOOT].sector_count * FLASH_SECTOR_SIZE;
+ flash_info[FLASH_BANK_BOOT].start[FIRST_SECTOR] = dev->base;
+ size += flash_info[FLASH_BANK_BOOT].size;
+
+
+ /*
+ * Provide info for 512K FLASH0 segment (U-Boot)
+ */
+ dev = FLASH_DEV_BANK0_HIGH;
+ flash_info[FLASH_BANK_AUX].flash_id =
+ (dev->vendorID << 16) | dev->deviceID;
+ flash_info[FLASH_BANK_AUX].sector_count = dev->sectors;
+ flash_info[FLASH_BANK_AUX].size =
+ flash_info[FLASH_BANK_AUX].sector_count * FLASH_SECTOR_SIZE;
+ flash_info[FLASH_BANK_AUX].start[FIRST_SECTOR] = dev->base;
+ size += flash_info[FLASH_BANK_AUX].size;
+
+
+ return size;
+}
+
+/*
+ * Get flash device from U-Boot flash info.
+ */
+flash_dev_t *getFlashDevFromInfo (flash_info_t * info)
+{
+ int i;
+
+ if (!info)
+ return NULL;
+
+ for (i = 0; i < flashDevCount; i++) {
+ flash_dev_t *dev = &flashDev[i];
+
+ if (dev->found && (dev->base == info->start[0]))
+ return dev;
+ }
+ printf ("ERROR: notice, no FLASH mapped at address 0x%x\n",
+ (unsigned int) info->start[0]);
+ return NULL;
+}
+
+ulong flash_get_size (vu_long * addr, flash_info_t * info)
+{
+ int i;
+
+ for (i = 0; i < flashDevCount; i++) {
+ flash_dev_t *dev = &flashDev[i];
+
+ if (dev->found) {
+ if (dev->base == (unsigned int) addr) {
+ info->flash_id = (dev->vendorID << 16) | dev->deviceID;
+ info->sector_count = dev->sectors;
+ info->size = info->sector_count * FLASH_SECTOR_SIZE;
+ return dev->sectors * FLASH_SECTOR_SIZE;
+ }
+ }
+ }
+ return 0;
+}
+
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+ unsigned int chip;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch ((info->flash_id >> 16) & 0xff) {
+ case 0x1:
+ printf ("AMD ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+ chip = (unsigned int) info->flash_id & 0x000000ff;
+
+ switch (chip) {
+
+ case AMD_ID_F040B:
+ printf ("AM29F040B (4 Mbit)\n");
+ break;
+
+ case AMD_ID_LV160B:
+ case FLASH_AM160LV:
+ case 0x49:
+ printf ("AM29LV160B (16 Mbit / 2M x 8bit)\n");
+ break;
+
+ default:
+ printf ("Unknown Chip Type:0x%x\n", chip);
+ break;
+ }
+
+ printf (" Size: %ld bytes in %d Sectors\n",
+ info->size, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[FIRST_SECTOR] + i * FLASH_SECTOR_SIZE,
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+}
+
+
+/*
+ * Erase a range of flash sectors.
+ */
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ int prot, sect;
+ flash_dev_t *dev = NULL;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ /* Start erase on unprotected sectors */
+ dev = getFlashDevFromInfo (info);
+ if (dev) {
+ printf ("Erase FLASH[%s] -%d sectors:", dev->name, dev->sectors);
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ printf (".");
+ if (ERROR == flashEraseSector (dev, sect)) {
+ printf ("ERROR: could not erase sector %d on FLASH[%s]\n", sect, dev->name);
+ return 1;
+ }
+ }
+ }
+ }
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t * info, ulong dest, ulong data)
+{
+
+ flash_dev_t *dev = getFlashDevFromInfo (info);
+ int addr = dest - info->start[0];
+
+ if (!dev)
+ return 1;
+
+ if (OK != flashWrite (dev, addr, (char *) &data, sizeof (ulong))) {
+ printf ("ERROR: could not write to addr=0x%x, data=0x%x\n",
+ (unsigned int) addr, (unsigned) data);
+ return 1;
+ }
+
+ if ((addr % FLASH_SECTOR_SIZE) == 0)
+ printf (".");
+
+
+ PRINTF ("write_word:0x%x, base=0x%x, addr=0x%x, data=0x%x\n",
+ (unsigned) info->start[0],
+ (unsigned) dest,
+ (unsigned) (dest - info->start[0]), (unsigned) data);
+
+ return (0);
+}
+
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+ flash_dev_t *dev = getFlashDevFromInfo (info);
+
+ if (dev) {
+ printf ("FLASH[%s]:", dev->name);
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < 4 && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ if ((rc = write_word (info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i = 0; i < 4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word (info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ return (write_word (info, wp, data));
+ }
+ return 1;
+}
+
+/*-----------------------------------------------------------------------
+ */