ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/uboot/board/mpl/common/common_util.c b/marvell/uboot/board/mpl/common/common_util.c
new file mode 100644
index 0000000..6b96bd5
--- /dev/null
+++ b/marvell/uboot/board/mpl/common/common_util.c
@@ -0,0 +1,757 @@
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <video_fb.h>
+#include "common_util.h"
+#include <asm/processor.h>
+#include <asm/byteorder.h>
+#include <i2c.h>
+#include <pci.h>
+#include <malloc.h>
+#include <bzlib.h>
+
+#ifdef CONFIG_PIP405
+#include "../pip405/pip405.h"
+#include <asm/4xx_pci.h>
+#endif
+#ifdef CONFIG_MIP405
+#include "../mip405/mip405.h"
+#include <asm/4xx_pci.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_PATI)
+#define FIRM_START 0xFFF00000
+#endif
+
+extern int mem_test(ulong start, ulong ramsize, int quiet);
+
+#define I2C_BACKUP_ADDR 0x7C00 /* 0x200 bytes for backup */
+#define IMAGE_SIZE CONFIG_SYS_MONITOR_LEN /* ugly, but it works for now */
+
+#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
+/*-----------------------------------------------------------------------
+ * On PIP/MIP405 we have 3 (4) possible boot mode
+ *
+ * - Boot from Flash (Flash CS = CS0, MPS CS = CS1)
+ * - Boot from MPS (Flash CS = CS1, MPS CS = CS0)
+ * - Boot from PCI with Flash map (Flash CS = CS0, MPS CS = CS1)
+ * - Boot from PCI with MPS map (Flash CS = CS1, MPS CS = CS0)
+ * The flash init is the first board specific routine which is called
+ * after code relocation (running from SDRAM)
+ * The first thing we do is to map the Flash CS to the Flash area and
+ * the MPS CS to the MPS area. Since the flash size is unknown at this
+ * point, we use the max flash size and the lowest flash address as base.
+ *
+ * After flash detection we adjust the size of the CS area accordingly.
+ * update_flash_size() will fix in wrong values in the flash_info structure,
+ * misc_init_r() will fix the values in the board info structure
+ */
+int get_boot_mode(void)
+{
+ unsigned long pbcr;
+ int res = 0;
+ pbcr = mfdcr(CPC0_PSR);
+ if ((pbcr & PSR_ROM_WIDTH_MASK) == 0)
+ /* boot via MPS or MPS mapping */
+ res = BOOT_MPS;
+ if (pbcr & PSR_ROM_LOC)
+ /* boot via PCI.. */
+ res |= BOOT_PCI;
+ return res;
+}
+
+/* Map the flash high (in boot area)
+ This code can only be executed from SDRAM (after relocation).
+*/
+void setup_cs_reloc(void)
+{
+ int mode;
+ /*
+ * since we are relocated, we can set-up the CS finaly
+ * but first of all, switch off PCI mapping (in case it
+ * was a PCI boot)
+ */
+ out32r(PMM0MA, 0L);
+ /* get boot mode */
+ mode = get_boot_mode();
+ /*
+ * we map the flash high in every case
+ * first find out to which CS the flash is attached to
+ */
+ if (mode & BOOT_MPS) {
+ /* map flash high on CS1 and MPS on CS0 */
+ mtdcr(EBC0_CFGADDR, PB0AP);
+ mtdcr(EBC0_CFGDATA, MPS_AP);
+ mtdcr(EBC0_CFGADDR, PB0CR);
+ mtdcr(EBC0_CFGDATA, MPS_CR);
+ /*
+ * we use the default values (max values) for the flash
+ * because its real size is not yet known
+ */
+ mtdcr(EBC0_CFGADDR, PB1AP);
+ mtdcr(EBC0_CFGDATA, FLASH_AP);
+ mtdcr(EBC0_CFGADDR, PB1CR);
+ mtdcr(EBC0_CFGDATA, FLASH_CR_B);
+ } else {
+ /* map flash high on CS0 and MPS on CS1 */
+ mtdcr(EBC0_CFGADDR, PB1AP);
+ mtdcr(EBC0_CFGDATA, MPS_AP);
+ mtdcr(EBC0_CFGADDR, PB1CR);
+ mtdcr(EBC0_CFGDATA, MPS_CR);
+ /*
+ * we use the default values (max values) for the flash
+ * because its real size is not yet known
+ */
+ mtdcr(EBC0_CFGADDR, PB0AP);
+ mtdcr(EBC0_CFGDATA, FLASH_AP);
+ mtdcr(EBC0_CFGADDR, PB0CR);
+ mtdcr(EBC0_CFGDATA, FLASH_CR_B);
+ }
+}
+#endif /* #if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) */
+
+#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
+/* adjust flash start and protection info */
+int update_flash_size(int flash_size)
+{
+ int i = 0, mode;
+ flash_info_t *info = &flash_info[0];
+ unsigned long flashcr;
+ unsigned long flash_base = (0 - flash_size) & 0xFFF00000;
+
+ if (flash_size > 128*1024*1024) {
+ printf("\n ### ERROR, wrong flash size: %X, reset board ###\n",
+ flash_size);
+ hang();
+ }
+
+ if ((flash_size >> 20) != 0)
+ i = __ilog2(flash_size >> 20);
+
+ /* set up flash CS according to the size */
+ mode = get_boot_mode();
+ if (mode & BOOT_MPS) {
+ /* flash is on CS1 */
+ mtdcr(EBC0_CFGADDR, PB1CR);
+ flashcr = mfdcr(EBC0_CFGDATA);
+ /* we map the flash high in every case */
+ flashcr &= 0x0001FFFF; /* mask out address bits */
+ flashcr |= flash_base; /* start addr */
+ flashcr |= (i << 17); /* size addr */
+ mtdcr(EBC0_CFGADDR, PB1CR);
+ mtdcr(EBC0_CFGDATA, flashcr);
+ } else {
+ /* flash is on CS0 */
+ mtdcr(EBC0_CFGADDR, PB0CR);
+ flashcr = mfdcr(EBC0_CFGDATA);
+ /* we map the flash high in every case */
+ flashcr &= 0x0001FFFF; /* mask out address bits */
+ flashcr |= flash_base; /* start addr */
+ flashcr |= (i << 17); /* size addr */
+ mtdcr(EBC0_CFGADDR, PB0CR);
+ mtdcr(EBC0_CFGDATA, flashcr);
+ }
+
+ for (i = 0; i < info->sector_count; i++)
+ /* adjust sector start address */
+ info->start[i] = flash_base +
+ (info->start[i] - CONFIG_SYS_FLASH_BASE);
+
+ /* unprotect all sectors */
+ flash_protect(FLAG_PROTECT_CLEAR,
+ info->start[0],
+ 0xFFFFFFFF,
+ info);
+ flash_protect_default();
+ /* protect reset vector too*/
+ flash_protect(FLAG_PROTECT_SET,
+ info->start[info->sector_count-1],
+ 0xFFFFFFFF,
+ info);
+
+ return 0;
+}
+#endif
+
+static int
+mpl_prg(uchar *src, ulong size)
+{
+ ulong start;
+ flash_info_t *info = &flash_info[0];
+ int i, rc;
+#if defined(CONFIG_PATI)
+ int start_sect;
+#endif
+#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) || defined(CONFIG_PATI)
+ char *copystr = (char *)src;
+ ulong *magic = (ulong *)src;
+#endif
+
+#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) || defined(CONFIG_PATI)
+ if (uimage_to_cpu (magic[0]) != IH_MAGIC) {
+ puts("Bad Magic number\n");
+ return -1;
+ }
+ /* some more checks before we delete the Flash... */
+ /* Checking the ISO_STRING prevents to program a
+ * wrong Firmware Image into the flash.
+ */
+ i = 4; /* skip Magic number */
+ while (1) {
+ if (strncmp(©str[i], "MEV-", 4) == 0)
+ break;
+ if (i++ >= 0x100) {
+ puts("Firmware Image for unknown Target\n");
+ return -1;
+ }
+ }
+ /* we have the ISO STRING, check */
+ if (strncmp(©str[i], CONFIG_ISO_STRING, sizeof(CONFIG_ISO_STRING)-1) != 0) {
+ printf("Wrong Firmware Image: %s\n", ©str[i]);
+ return -1;
+ }
+#if !defined(CONFIG_PATI)
+ start = 0 - size;
+
+ /* unprotect sectors used by u-boot */
+ flash_protect(FLAG_PROTECT_CLEAR,
+ start,
+ 0xFFFFFFFF,
+ info);
+
+ /* search start sector */
+ for (i = info->sector_count-1; i > 0; i--)
+ if (start >= info->start[i])
+ break;
+
+ /* now erase flash */
+ printf("Erasing at %lx (sector %d) (start %lx)\n",
+ start,i,info->start[i]);
+ if ((rc = flash_erase (info, i, info->sector_count-1)) != 0) {
+ puts("ERROR ");
+ flash_perror(rc);
+ return (1);
+ }
+
+#else /* #if !defined(CONFIG_PATI */
+ start = FIRM_START;
+ start_sect = -1;
+
+ /* search start sector */
+ for (i = info->sector_count-1; i > 0; i--)
+ if (start >= info->start[i])
+ break;
+
+ start_sect = i;
+
+ for (i = info->sector_count-1; i > 0; i--)
+ if ((start + size) >= info->start[i])
+ break;
+
+ /* unprotect sectors used by u-boot */
+ flash_protect(FLAG_PROTECT_CLEAR,
+ start,
+ start + size,
+ info);
+
+ /* now erase flash */
+ printf ("Erasing at %lx to %lx (sector %d to %d) (%lx to %lx)\n",
+ start, start + size, start_sect, i,
+ info->start[start_sect], info->start[i]);
+ if ((rc = flash_erase (info, start_sect, i)) != 0) {
+ puts ("ERROR ");
+ flash_perror (rc);
+ return (1);
+ }
+#endif /* defined(CONFIG_PATI) */
+
+#elif defined(CONFIG_VCMA9)
+ start = 0;
+
+ /* search end sector */
+ for (i = 0; i < info->sector_count; i++)
+ if (size < info->start[i])
+ break;
+
+ flash_protect(FLAG_PROTECT_CLEAR,
+ start,
+ size,
+ info);
+
+ /* now erase flash */
+ printf("Erasing at %lx (sector %d) (start %lx)\n",
+ start,0,info->start[0]);
+ if ((rc = flash_erase (info, 0, i)) != 0) {
+ puts("ERROR ");
+ flash_perror(rc);
+ return (1);
+ }
+
+#endif
+ printf("flash erased, programming from 0x%lx 0x%lx Bytes\n",
+ (ulong)src, size);
+ if ((rc = flash_write ((char *)src, start, size)) != 0) {
+ puts("ERROR ");
+ flash_perror(rc);
+ return (1);
+ }
+ puts("OK programming done\n");
+ return 0;
+}
+
+
+static int
+mpl_prg_image(uchar *ld_addr)
+{
+ unsigned long len;
+ uchar *data;
+ image_header_t *hdr = (image_header_t *)ld_addr;
+ int rc;
+
+#if defined(CONFIG_FIT)
+ if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) {
+ puts ("Non legacy image format not supported\n");
+ return -1;
+ }
+#endif
+
+ if (!image_check_magic (hdr)) {
+ puts("Bad Magic Number\n");
+ return 1;
+ }
+ image_print_contents (hdr);
+ if (!image_check_os (hdr, IH_OS_U_BOOT)) {
+ puts("No U-Boot Image\n");
+ return 1;
+ }
+ if (!image_check_type (hdr, IH_TYPE_FIRMWARE)) {
+ puts("No Firmware Image\n");
+ return 1;
+ }
+ if (!image_check_hcrc (hdr)) {
+ puts("Bad Header Checksum\n");
+ return 1;
+ }
+ puts("Verifying Checksum ... ");
+ if (!image_check_dcrc (hdr)) {
+ puts("Bad Data CRC\n");
+ return 1;
+ }
+ puts("OK\n");
+
+ data = (uchar *)image_get_data (hdr);
+ len = image_get_data_size (hdr);
+
+ if (image_get_comp (hdr) != IH_COMP_NONE) {
+ uchar *buf;
+ /* reserve space for uncompressed image */
+ if ((buf = malloc(IMAGE_SIZE)) == NULL) {
+ puts("Insufficient space for decompression\n");
+ return 1;
+ }
+
+ switch (image_get_comp (hdr)) {
+ case IH_COMP_GZIP:
+ puts("Uncompressing (GZIP) ... ");
+ rc = gunzip ((void *)(buf), IMAGE_SIZE, data, &len);
+ if (rc != 0) {
+ puts("GUNZIP ERROR\n");
+ free(buf);
+ return 1;
+ }
+ puts("OK\n");
+ break;
+#ifdef CONFIG_BZIP2
+ case IH_COMP_BZIP2:
+ puts("Uncompressing (BZIP2) ... ");
+ {
+ uint retlen = IMAGE_SIZE;
+ rc = BZ2_bzBuffToBuffDecompress ((char *)(buf), &retlen,
+ (char *)data, len, 0, 0);
+ len = retlen;
+ }
+ if (rc != BZ_OK) {
+ printf ("BUNZIP2 ERROR: %d\n", rc);
+ free(buf);
+ return 1;
+ }
+ puts("OK\n");
+ break;
+#endif
+ default:
+ printf ("Unimplemented compression type %d\n",
+ image_get_comp (hdr));
+ free(buf);
+ return 1;
+ }
+
+ rc = mpl_prg(buf, len);
+ free(buf);
+ } else {
+ rc = mpl_prg(data, len);
+ }
+
+ return(rc);
+}
+
+#if !defined(CONFIG_PATI)
+void get_backup_values(backup_t *buf)
+{
+ i2c_read(CONFIG_SYS_DEF_EEPROM_ADDR, I2C_BACKUP_ADDR,2,(void *)buf,sizeof(backup_t));
+}
+
+void set_backup_values(int overwrite)
+{
+ backup_t back;
+ int i;
+
+ get_backup_values(&back);
+ if(!overwrite) {
+ if(strncmp(back.signature,"MPL\0",4)==0) {
+ puts("Not possible to write Backup\n");
+ return;
+ }
+ }
+ memcpy(back.signature,"MPL\0",4);
+ i = getenv_f("serial#",back.serial_name,16);
+ if(i < 0) {
+ puts("Not possible to write Backup\n");
+ return;
+ }
+ back.serial_name[16]=0;
+ i = getenv_f("ethaddr",back.eth_addr,20);
+ if(i < 0) {
+ puts("Not possible to write Backup\n");
+ return;
+ }
+ back.eth_addr[20]=0;
+ i2c_write(CONFIG_SYS_DEF_EEPROM_ADDR, I2C_BACKUP_ADDR,2,(void *)&back,sizeof(backup_t));
+}
+
+void clear_env_values(void)
+{
+ backup_t back;
+ unsigned char env_crc[4];
+
+ memset(&back,0xff,sizeof(backup_t));
+ memset(env_crc,0x00,4);
+ i2c_write(CONFIG_SYS_DEF_EEPROM_ADDR,I2C_BACKUP_ADDR,2,(void *)&back,sizeof(backup_t));
+ i2c_write(CONFIG_SYS_DEF_EEPROM_ADDR,CONFIG_ENV_OFFSET,2,(void *)env_crc,4);
+}
+
+/*
+ * check crc of "older" environment
+ */
+int check_env_old_size(ulong oldsize)
+{
+ ulong crc, len, new;
+ unsigned off;
+ uchar buf[64];
+
+ /* read old CRC */
+ eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR,
+ CONFIG_ENV_OFFSET,
+ (uchar *)&crc, sizeof(ulong));
+
+ new = 0;
+ len = oldsize;
+ off = sizeof(long);
+ len = oldsize-off;
+ while (len > 0) {
+ int n = (len > sizeof(buf)) ? sizeof(buf) : len;
+
+ eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR, CONFIG_ENV_OFFSET+off, buf, n);
+ new = crc32 (new, buf, n);
+ len -= n;
+ off += n;
+ }
+
+ return (crc == new);
+}
+
+static ulong oldsizes[] = {
+ 0x200,
+ 0x800,
+ 0
+};
+
+void copy_old_env(ulong size)
+{
+ uchar name_buf[64];
+ uchar value_buf[0x800];
+ uchar c;
+ ulong len;
+ unsigned off;
+ uchar *name, *value;
+
+ name = &name_buf[0];
+ value = &value_buf[0];
+ len=size;
+ off = sizeof(long);
+ while (len > off) {
+ eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR, CONFIG_ENV_OFFSET+off, &c, 1);
+ if(c != '=') {
+ *name++=c;
+ off++;
+ }
+ else {
+ *name++='\0';
+ off++;
+ do {
+ eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR, CONFIG_ENV_OFFSET+off, &c, 1);
+ *value++=c;
+ off++;
+ if(c == '\0')
+ break;
+ } while(len > off);
+ name = &name_buf[0];
+ value = &value_buf[0];
+ if(strncmp((char *)name,"baudrate",8)!=0) {
+ setenv((char *)name,(char *)value);
+ }
+
+ }
+ }
+}
+
+
+void check_env(void)
+{
+ char *s;
+ int i=0;
+ char buf[32];
+ backup_t back;
+
+ s=getenv("serial#");
+ if(!s) {
+ while(oldsizes[i]) {
+ if(check_env_old_size(oldsizes[i]))
+ break;
+ i++;
+ }
+ if(!oldsizes[i]) {
+ /* no old environment has been found */
+ get_backup_values (&back);
+ if (strncmp (back.signature, "MPL\0", 4) == 0) {
+ sprintf (buf, "%s", back.serial_name);
+ setenv ("serial#", buf);
+ sprintf (buf, "%s", back.eth_addr);
+ setenv ("ethaddr", buf);
+ printf ("INFO: serial# and ethaddr recovered, use saveenv\n");
+ return;
+ }
+ }
+ else {
+ copy_old_env(oldsizes[i]);
+ puts("INFO: old environment ajusted, use saveenv\n");
+ }
+ }
+ else {
+ /* check if back up is set */
+ get_backup_values(&back);
+ if(strncmp(back.signature,"MPL\0",4)!=0) {
+ set_backup_values(0);
+ }
+ }
+}
+
+#endif /* #if !defined(CONFIG_PATI) */
+
+int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ ulong ld_addr;
+ int result;
+#if !defined(CONFIG_PATI)
+ ulong size = IMAGE_SIZE;
+ ulong src = MULTI_PURPOSE_SOCKET_ADDR;
+ backup_t back;
+#endif
+
+ if (strcmp(argv[1], "flash") == 0)
+ {
+#if defined(CONFIG_CMD_FDC)
+ if (strcmp(argv[2], "floppy") == 0) {
+ char *local_args[3];
+ extern int do_fdcboot (cmd_tbl_t *, int, int, char *[]);
+ puts("\nupdating bootloader image from floppy\n");
+ local_args[0] = argv[0];
+ if(argc==4) {
+ local_args[1] = argv[3];
+ local_args[2] = NULL;
+ ld_addr=simple_strtoul(argv[3], NULL, 16);
+ result=do_fdcboot(cmdtp, 0, 2, local_args);
+ }
+ else {
+ local_args[1] = NULL;
+ ld_addr=CONFIG_SYS_LOAD_ADDR;
+ result=do_fdcboot(cmdtp, 0, 1, local_args);
+ }
+ result=mpl_prg_image((uchar *)ld_addr);
+ return result;
+ }
+#endif
+ if (strcmp(argv[2], "mem") == 0) {
+ if(argc==4) {
+ ld_addr=simple_strtoul(argv[3], NULL, 16);
+ }
+ else {
+ ld_addr=load_addr;
+ }
+ printf ("\nupdating bootloader image from memory at %lX\n",ld_addr);
+ result=mpl_prg_image((uchar *)ld_addr);
+ return result;
+ }
+#if !defined(CONFIG_PATI)
+ if (strcmp(argv[2], "mps") == 0) {
+ puts("\nupdating bootloader image from MPS\n");
+ result=mpl_prg((uchar *)src,size);
+ return result;
+ }
+#endif /* #if !defined(CONFIG_PATI) */
+ }
+#if !defined(CONFIG_PATI)
+ if (strcmp(argv[1], "clearenvvalues") == 0)
+ {
+ if (strcmp(argv[2], "yes") == 0)
+ {
+ clear_env_values();
+ return 0;
+ }
+ }
+ if (strcmp(argv[1], "getback") == 0) {
+ get_backup_values(&back);
+ back.signature[3]=0;
+ back.serial_name[16]=0;
+ back.eth_addr[20]=0;
+ printf("GetBackUp: signature: %s\n",back.signature);
+ printf(" serial#: %s\n",back.serial_name);
+ printf(" ethaddr: %s\n",back.eth_addr);
+ return 0;
+ }
+ if (strcmp(argv[1], "setback") == 0) {
+ set_backup_values(1);
+ return 0;
+ }
+#endif
+ return cmd_usage(cmdtp);
+}
+
+
+#if defined(CONFIG_CMD_DOC)
+void doc_init (void)
+{
+ doc_probe(MULTI_PURPOSE_SOCKET_ADDR);
+}
+#endif
+
+
+#ifdef CONFIG_VIDEO
+/******************************************************
+ * Routines to display the Board information
+ * to the screen (since the VGA will be initialized as last,
+ * we must resend the infos)
+ */
+
+#ifdef CONFIG_CONSOLE_EXTRA_INFO
+extern GraphicDevice ctfb;
+extern int get_boot_mode(void);
+
+void video_get_info_str (int line_number, char *info)
+{
+ /* init video info strings for graphic console */
+ PPC4xx_SYS_INFO sys_info;
+ char rev;
+ int i,boot;
+ unsigned long pvr;
+ char buf[64];
+ char buf1[32], buf2[32], buf3[32], buf4[32];
+ char cpustr[16];
+ char *s, *e, bc;
+ switch (line_number)
+ {
+ case 2:
+ /* CPU and board infos */
+ pvr=get_pvr();
+ get_sys_info (&sys_info);
+ switch (pvr) {
+ case PVR_405GP_RB: rev='B'; break;
+ case PVR_405GP_RC: rev='C'; break;
+ case PVR_405GP_RD: rev='D'; break;
+ case PVR_405GP_RE: rev='E'; break;
+ case PVR_405GPR_RB: rev='B'; break;
+ default: rev='?'; break;
+ }
+ if(pvr==PVR_405GPR_RB)
+ sprintf(cpustr,"PPC405GPr %c",rev);
+ else
+ sprintf(cpustr,"PPC405GP %c",rev);
+ /* Board info */
+ i=0;
+ s=getenv ("serial#");
+#ifdef CONFIG_PIP405
+ if (!s || strncmp (s, "PIP405", 6)) {
+ sprintf(buf,"### No HW ID - assuming PIP405");
+ }
+#endif
+#ifdef CONFIG_MIP405
+ if (!s || strncmp (s, "MIP405", 6)) {
+ sprintf(buf,"### No HW ID - assuming MIP405");
+ }
+#endif
+ else {
+ for (e = s; *e; ++e) {
+ if (*e == ' ')
+ break;
+ }
+ for (; s < e; ++s) {
+ if (*s == '_') {
+ ++s;
+ break;
+ }
+ buf[i++] = *s;
+ }
+ sprintf(&buf[i]," SN ");
+ i+=4;
+ for (; s < e; ++s) {
+ buf[i++] = *s;
+ }
+ buf[i++]=0;
+ }
+ sprintf (info," %s %s %s MHz (%s/%s/%s MHz)",
+ buf, cpustr,
+ strmhz (buf1, gd->cpu_clk),
+ strmhz (buf2, sys_info.freqPLB),
+ strmhz (buf3, sys_info.freqPLB / sys_info.pllOpbDiv),
+ strmhz (buf4, sys_info.freqPLB / sys_info.pllExtBusDiv));
+ return;
+ case 3:
+ /* Memory Info */
+ boot = get_boot_mode();
+ bc = in8 (CONFIG_PORT_ADDR);
+ sprintf(info, " %luMB RAM, %luMB Flash Cfg 0x%02X %s %s",
+ gd->bd->bi_memsize / 0x100000,
+ gd->bd->bi_flashsize / 0x100000,
+ bc,
+ (boot & BOOT_MPS) ? "MPS boot" : "Flash boot",
+ ctfb.modeIdent);
+ return;
+ case 1:
+ sprintf (buf, "%s",CONFIG_IDENT_STRING);
+ sprintf (info, " %s", &buf[1]);
+ return;
+ }
+ /* no more info lines */
+ *info = 0;
+ return;
+}
+#endif /* CONFIG_CONSOLE_EXTRA_INFO */
+
+#endif /* CONFIG_VIDEO */