ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/uboot/board/xilinx/zynq/board.c b/marvell/uboot/board/xilinx/zynq/board.c
new file mode 100644
index 0000000..a5b9bde
--- /dev/null
+++ b/marvell/uboot/board/xilinx/zynq/board.c
@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <zynqpl.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Bootmode setting values */
+#define ZYNQ_BM_MASK 0x0F
+#define ZYNQ_BM_NOR 0x02
+#define ZYNQ_BM_SD 0x05
+#define ZYNQ_BM_JTAG 0x0
+
+#ifdef CONFIG_FPGA
+Xilinx_desc fpga;
+
+/* It can be done differently */
+Xilinx_desc fpga010 = XILINX_XC7Z010_DESC(0x10);
+Xilinx_desc fpga020 = XILINX_XC7Z020_DESC(0x20);
+Xilinx_desc fpga030 = XILINX_XC7Z030_DESC(0x30);
+Xilinx_desc fpga045 = XILINX_XC7Z045_DESC(0x45);
+Xilinx_desc fpga100 = XILINX_XC7Z100_DESC(0x100);
+#endif
+
+int board_init(void)
+{
+#ifdef CONFIG_FPGA
+ u32 idcode;
+
+ idcode = zynq_slcr_get_idcode();
+
+ switch (idcode) {
+ case XILINX_ZYNQ_7010:
+ fpga = fpga010;
+ break;
+ case XILINX_ZYNQ_7020:
+ fpga = fpga020;
+ break;
+ case XILINX_ZYNQ_7030:
+ fpga = fpga030;
+ break;
+ case XILINX_ZYNQ_7045:
+ fpga = fpga045;
+ break;
+ case XILINX_ZYNQ_7100:
+ fpga = fpga100;
+ break;
+ }
+#endif
+
+ icache_enable();
+
+#ifdef CONFIG_FPGA
+ fpga_init();
+ fpga_add(fpga_xilinx, &fpga);
+#endif
+
+ return 0;
+}
+
+int board_late_init(void)
+{
+ switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
+ case ZYNQ_BM_NOR:
+ setenv("modeboot", "norboot");
+ break;
+ case ZYNQ_BM_SD:
+ setenv("modeboot", "sdboot");
+ break;
+ case ZYNQ_BM_JTAG:
+ setenv("modeboot", "jtagboot");
+ break;
+ default:
+ setenv("modeboot", "");
+ break;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+ u32 ret = 0;
+
+#ifdef CONFIG_XILINX_AXIEMAC
+ ret |= xilinx_axiemac_initialize(bis, XILINX_AXIEMAC_BASEADDR,
+ XILINX_AXIDMA_BASEADDR);
+#endif
+#ifdef CONFIG_XILINX_EMACLITE
+ u32 txpp = 0;
+ u32 rxpp = 0;
+# ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
+ txpp = 1;
+# endif
+# ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
+ rxpp = 1;
+# endif
+ ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR,
+ txpp, rxpp);
+#endif
+
+#if defined(CONFIG_ZYNQ_GEM)
+# if defined(CONFIG_ZYNQ_GEM0)
+ ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0,
+ CONFIG_ZYNQ_GEM_PHY_ADDR0, 0);
+# endif
+# if defined(CONFIG_ZYNQ_GEM1)
+ ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR1,
+ CONFIG_ZYNQ_GEM_PHY_ADDR1, 0);
+# endif
+#endif
+ return ret;
+}
+#endif
+
+#ifdef CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bd)
+{
+ int ret = 0;
+
+#if defined(CONFIG_ZYNQ_SDHCI)
+# if defined(CONFIG_ZYNQ_SDHCI0)
+ ret = zynq_sdhci_init(ZYNQ_SDHCI_BASEADDR0);
+# endif
+# if defined(CONFIG_ZYNQ_SDHCI1)
+ ret |= zynq_sdhci_init(ZYNQ_SDHCI_BASEADDR1);
+# endif
+#endif
+ return ret;
+}
+#endif
+
+int dram_init(void)
+{
+ gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+ zynq_ddrc_init();
+
+ return 0;
+}