ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/uboot/drivers/gpio/mpc83xx_gpio.c b/marvell/uboot/drivers/gpio/mpc83xx_gpio.c
new file mode 100644
index 0000000..92b6e0c
--- /dev/null
+++ b/marvell/uboot/drivers/gpio/mpc83xx_gpio.c
@@ -0,0 +1,183 @@
+/*
+ * Freescale MPC83xx GPIO handling.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+#ifndef CONFIG_MPC83XX_GPIO_0_INIT_DIRECTION
+#define CONFIG_MPC83XX_GPIO_0_INIT_DIRECTION 0
+#endif
+#ifndef CONFIG_MPC83XX_GPIO_1_INIT_DIRECTION
+#define CONFIG_MPC83XX_GPIO_1_INIT_DIRECTION 0
+#endif
+#ifndef CONFIG_MPC83XX_GPIO_0_INIT_OPEN_DRAIN
+#define CONFIG_MPC83XX_GPIO_0_INIT_OPEN_DRAIN 0
+#endif
+#ifndef CONFIG_MPC83XX_GPIO_1_INIT_OPEN_DRAIN
+#define CONFIG_MPC83XX_GPIO_1_INIT_OPEN_DRAIN 0
+#endif
+#ifndef CONFIG_MPC83XX_GPIO_0_INIT_VALUE
+#define CONFIG_MPC83XX_GPIO_0_INIT_VALUE 0
+#endif
+#ifndef CONFIG_MPC83XX_GPIO_1_INIT_VALUE
+#define CONFIG_MPC83XX_GPIO_1_INIT_VALUE 0
+#endif
+
+static unsigned int gpio_output_value[MPC83XX_GPIO_CTRLRS];
+
+/*
+ * Generic_GPIO primitives.
+ */
+
+int gpio_request(unsigned gpio, const char *label)
+{
+ if (gpio >= MAX_NUM_GPIOS)
+ return -1;
+
+ return 0;
+}
+
+int gpio_free(unsigned gpio)
+{
+ /* Do not set to input */
+ return 0;
+}
+
+/* set GPIO pin 'gpio' as an input */
+int gpio_direction_input(unsigned gpio)
+{
+ immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ unsigned int ctrlr;
+ unsigned int line;
+ unsigned int line_mask;
+
+ /* 32-bits per controller */
+ ctrlr = gpio >> 5;
+ line = gpio & (0x1F);
+
+ /* Big endian */
+ line_mask = 1 << (31 - line);
+
+ clrbits_be32(&im->gpio[ctrlr].dir, line_mask);
+
+ return 0;
+}
+
+/* set GPIO pin 'gpio' as an output, with polarity 'value' */
+int gpio_direction_output(unsigned gpio, int value)
+{
+ immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ unsigned int ctrlr;
+ unsigned int line;
+ unsigned int line_mask;
+
+ if (value != 0 && value != 1) {
+ printf("Error: Value parameter must be 0 or 1.\n");
+ return -1;
+ }
+
+ gpio_set_value(gpio, value);
+
+ /* 32-bits per controller */
+ ctrlr = gpio >> 5;
+ line = gpio & (0x1F);
+
+ /* Big endian */
+ line_mask = 1 << (31 - line);
+
+ /* Make the line output */
+ setbits_be32(&im->gpio[ctrlr].dir, line_mask);
+
+ return 0;
+}
+
+/* read GPIO IN value of pin 'gpio' */
+int gpio_get_value(unsigned gpio)
+{
+ immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ unsigned int ctrlr;
+ unsigned int line;
+ unsigned int line_mask;
+
+ /* 32-bits per controller */
+ ctrlr = gpio >> 5;
+ line = gpio & (0x1F);
+
+ /* Big endian */
+ line_mask = 1 << (31 - line);
+
+ /* Read the value and mask off the bit */
+ return (in_be32(&im->gpio[ctrlr].dat) & line_mask) != 0;
+}
+
+/* write GPIO OUT value to pin 'gpio' */
+int gpio_set_value(unsigned gpio, int value)
+{
+ immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ unsigned int ctrlr;
+ unsigned int line;
+ unsigned int line_mask;
+
+ if (value != 0 && value != 1) {
+ printf("Error: Value parameter must be 0 or 1.\n");
+ return -1;
+ }
+
+ /* 32-bits per controller */
+ ctrlr = gpio >> 5;
+ line = gpio & (0x1F);
+
+ /* Big endian */
+ line_mask = 1 << (31 - line);
+
+ /* Update the local output buffer soft copy */
+ gpio_output_value[ctrlr] =
+ (gpio_output_value[ctrlr] & ~line_mask) | \
+ (value ? line_mask : 0);
+
+ /* Write the output */
+ out_be32(&im->gpio[ctrlr].dat, gpio_output_value[ctrlr]);
+
+ return 0;
+}
+
+/* Configure GPIO registers early */
+void mpc83xx_gpio_init_f(void)
+{
+ immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+
+#if MPC83XX_GPIO_CTRLRS >= 1
+ out_be32(&im->gpio[0].dir, CONFIG_MPC83XX_GPIO_0_INIT_DIRECTION);
+ out_be32(&im->gpio[0].odr, CONFIG_MPC83XX_GPIO_0_INIT_OPEN_DRAIN);
+ out_be32(&im->gpio[0].dat, CONFIG_MPC83XX_GPIO_0_INIT_VALUE);
+ out_be32(&im->gpio[0].ier, 0xFFFFFFFF); /* Clear all events */
+ out_be32(&im->gpio[0].imr, 0);
+ out_be32(&im->gpio[0].icr, 0);
+#endif
+
+#if MPC83XX_GPIO_CTRLRS >= 2
+ out_be32(&im->gpio[1].dir, CONFIG_MPC83XX_GPIO_1_INIT_DIRECTION);
+ out_be32(&im->gpio[1].odr, CONFIG_MPC83XX_GPIO_1_INIT_OPEN_DRAIN);
+ out_be32(&im->gpio[1].dat, CONFIG_MPC83XX_GPIO_1_INIT_VALUE);
+ out_be32(&im->gpio[1].ier, 0xFFFFFFFF); /* Clear all events */
+ out_be32(&im->gpio[1].imr, 0);
+ out_be32(&im->gpio[1].icr, 0);
+#endif
+}
+
+/* Initialize GPIO soft-copies */
+void mpc83xx_gpio_init_r(void)
+{
+#if MPC83XX_GPIO_CTRLRS >= 1
+ gpio_output_value[0] = CONFIG_MPC83XX_GPIO_0_INIT_VALUE;
+#endif
+
+#if MPC83XX_GPIO_CTRLRS >= 2
+ gpio_output_value[1] = CONFIG_MPC83XX_GPIO_1_INIT_VALUE;
+#endif
+}