ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/uboot/drivers/misc/status_led.c b/marvell/uboot/drivers/misc/status_led.c
new file mode 100644
index 0000000..ed9adb2
--- /dev/null
+++ b/marvell/uboot/drivers/misc/status_led.c
@@ -0,0 +1,111 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <status_led.h>
+
+/*
+ * The purpose of this code is to signal the operational status of a
+ * target which usually boots over the network; while running in
+ * U-Boot, a status LED is blinking. As soon as a valid BOOTP reply
+ * message has been received, the LED is turned off. The Linux
+ * kernel, once it is running, will start blinking the LED again,
+ * with another frequency.
+ */
+
+/* ------------------------------------------------------------------------- */
+
+typedef struct {
+ led_id_t mask;
+ int state;
+ int period;
+ int cnt;
+} led_dev_t;
+
+led_dev_t led_dev[] = {
+ { STATUS_LED_BIT,
+ STATUS_LED_STATE,
+ STATUS_LED_PERIOD,
+ 0,
+ },
+#if defined(STATUS_LED_BIT1)
+ { STATUS_LED_BIT1,
+ STATUS_LED_STATE1,
+ STATUS_LED_PERIOD1,
+ 0,
+ },
+#endif
+#if defined(STATUS_LED_BIT2)
+ { STATUS_LED_BIT2,
+ STATUS_LED_STATE2,
+ STATUS_LED_PERIOD2,
+ 0,
+ },
+#endif
+#if defined(STATUS_LED_BIT3)
+ { STATUS_LED_BIT3,
+ STATUS_LED_STATE3,
+ STATUS_LED_PERIOD3,
+ 0,
+ },
+#endif
+};
+
+#define MAX_LED_DEV (sizeof(led_dev)/sizeof(led_dev_t))
+
+static int status_led_init_done = 0;
+
+static void status_led_init (void)
+{
+ led_dev_t *ld;
+ int i;
+
+ for (i = 0, ld = led_dev; i < MAX_LED_DEV; i++, ld++)
+ __led_init (ld->mask, ld->state);
+ status_led_init_done = 1;
+}
+
+void status_led_tick (ulong timestamp)
+{
+ led_dev_t *ld;
+ int i;
+
+ if (!status_led_init_done)
+ status_led_init ();
+
+ for (i = 0, ld = led_dev; i < MAX_LED_DEV; i++, ld++) {
+
+ if (ld->state != STATUS_LED_BLINKING)
+ continue;
+
+ if (++ld->cnt >= ld->period) {
+ __led_toggle (ld->mask);
+ ld->cnt -= ld->period;
+ }
+
+ }
+}
+
+void status_led_set (int led, int state)
+{
+ led_dev_t *ld;
+
+ if (led < 0 || led >= MAX_LED_DEV)
+ return;
+
+ if (!status_led_init_done)
+ status_led_init ();
+
+ ld = &led_dev[led];
+
+ ld->state = state;
+ if (state == STATUS_LED_BLINKING) {
+ ld->cnt = 0; /* always start with full period */
+ state = STATUS_LED_ON; /* always start with LED _ON_ */
+ }
+ __led_set (ld->mask, state);
+}