ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/uboot/drivers/mmc/mmc.c b/marvell/uboot/drivers/mmc/mmc.c
new file mode 100644
index 0000000..c62b2a5
--- /dev/null
+++ b/marvell/uboot/drivers/mmc/mmc.c
@@ -0,0 +1,1526 @@
+/*
+ * Copyright 2008, Freescale Semiconductor, Inc
+ * Andy Fleming
+ *
+ * Based vaguely on the Linux code
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <mmc.h>
+#include <part.h>
+#include <malloc.h>
+#include <linux/list.h>
+#include <div64.h>
+#include "mmc_private.h"
+
+/* Set block count limit because of 16 bit register limit on some hardware*/
+#ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT
+#define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535
+#endif
+
+static struct list_head mmc_devices;
+static int cur_dev_num = -1;
+
+int __weak board_mmc_getwp(struct mmc *mmc)
+{
+ return -1;
+}
+
+int mmc_getwp(struct mmc *mmc)
+{
+ int wp;
+
+ wp = board_mmc_getwp(mmc);
+
+ if (wp < 0) {
+ if (mmc->getwp)
+ wp = mmc->getwp(mmc);
+ else
+ wp = 0;
+ }
+
+ return wp;
+}
+
+int __board_mmc_getcd(struct mmc *mmc) {
+ return -1;
+}
+
+int board_mmc_getcd(struct mmc *mmc)__attribute__((weak,
+ alias("__board_mmc_getcd")));
+
+int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
+{
+ int ret;
+
+#ifdef CONFIG_MMC_TRACE
+ int i;
+ u8 *ptr;
+
+ printf("CMD_SEND:%d\n", cmd->cmdidx);
+ printf("\t\tARG\t\t\t 0x%08X\n", cmd->cmdarg);
+ ret = mmc->send_cmd(mmc, cmd, data);
+ switch (cmd->resp_type) {
+ case MMC_RSP_NONE:
+ printf("\t\tMMC_RSP_NONE\n");
+ break;
+ case MMC_RSP_R1:
+ printf("\t\tMMC_RSP_R1,5,6,7 \t 0x%08X \n",
+ cmd->response[0]);
+ break;
+ case MMC_RSP_R1b:
+ printf("\t\tMMC_RSP_R1b\t\t 0x%08X \n",
+ cmd->response[0]);
+ break;
+ case MMC_RSP_R2:
+ printf("\t\tMMC_RSP_R2\t\t 0x%08X \n",
+ cmd->response[0]);
+ printf("\t\t \t\t 0x%08X \n",
+ cmd->response[1]);
+ printf("\t\t \t\t 0x%08X \n",
+ cmd->response[2]);
+ printf("\t\t \t\t 0x%08X \n",
+ cmd->response[3]);
+ printf("\n");
+ printf("\t\t\t\t\tDUMPING DATA\n");
+ for (i = 0; i < 4; i++) {
+ int j;
+ printf("\t\t\t\t\t%03d - ", i*4);
+ ptr = (u8 *)&cmd->response[i];
+ ptr += 3;
+ for (j = 0; j < 4; j++)
+ printf("%02X ", *ptr--);
+ printf("\n");
+ }
+ break;
+ case MMC_RSP_R3:
+ printf("\t\tMMC_RSP_R3,4\t\t 0x%08X \n",
+ cmd->response[0]);
+ break;
+ default:
+ printf("\t\tERROR MMC rsp not supported\n");
+ break;
+ }
+#else
+ ret = mmc->send_cmd(mmc, cmd, data);
+#endif
+ return ret;
+}
+
+int mmc_send_status(struct mmc *mmc, int timeout)
+{
+ struct mmc_cmd cmd;
+ int err, retries = 5;
+#ifdef CONFIG_MMC_TRACE
+ int status;
+#endif
+
+ cmd.cmdidx = MMC_CMD_SEND_STATUS;
+ cmd.resp_type = MMC_RSP_R1;
+ if (!mmc_host_is_spi(mmc))
+ cmd.cmdarg = mmc->rca << 16;
+
+ do {
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (!err) {
+ if ((cmd.response[0] & MMC_STATUS_RDY_FOR_DATA) &&
+ (cmd.response[0] & MMC_STATUS_CURR_STATE) !=
+ MMC_STATE_PRG)
+ break;
+ else if (cmd.response[0] & MMC_STATUS_MASK) {
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
+ printf("Status Error: 0x%08X\n",
+ cmd.response[0]);
+#endif
+ return COMM_ERR;
+ }
+ } else if (--retries < 0)
+ return err;
+
+ udelay(1000);
+
+ } while (timeout--);
+
+#ifdef CONFIG_MMC_TRACE
+ status = (cmd.response[0] & MMC_STATUS_CURR_STATE) >> 9;
+ printf("CURR STATE:%d\n", status);
+#endif
+ if (timeout <= 0) {
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
+ printf("Timeout waiting card ready\n");
+#endif
+ return TIMEOUT;
+ }
+
+ return 0;
+}
+
+int mmc_set_blocklen(struct mmc *mmc, int len)
+{
+ struct mmc_cmd cmd;
+
+ cmd.cmdidx = MMC_CMD_SET_BLOCKLEN;
+ cmd.resp_type = MMC_RSP_R1;
+ cmd.cmdarg = len;
+
+ udelay(1000);
+ return mmc_send_cmd(mmc, &cmd, NULL);
+}
+
+struct mmc *find_mmc_device(int dev_num)
+{
+ struct mmc *m;
+ struct list_head *entry;
+
+ list_for_each(entry, &mmc_devices) {
+ m = list_entry(entry, struct mmc, link);
+
+ if (m->block_dev.dev == dev_num)
+ return m;
+ }
+
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
+ printf("MMC Device %d not found\n", dev_num);
+#endif
+
+ return NULL;
+}
+
+static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start,
+ lbaint_t blkcnt)
+{
+ struct mmc_cmd cmd;
+ struct mmc_data data;
+
+ if (blkcnt > 1)
+ cmd.cmdidx = MMC_CMD_READ_MULTIPLE_BLOCK;
+ else
+ cmd.cmdidx = MMC_CMD_READ_SINGLE_BLOCK;
+
+ if (mmc->high_capacity)
+ cmd.cmdarg = start;
+ else
+ cmd.cmdarg = start * mmc->read_bl_len;
+
+ cmd.resp_type = MMC_RSP_R1;
+
+ data.dest = dst;
+ data.blocks = blkcnt;
+ data.blocksize = mmc->read_bl_len;
+ data.flags = MMC_DATA_READ;
+
+ if (mmc_send_cmd(mmc, &cmd, &data))
+ return 0;
+
+ if (blkcnt > 1) {
+ cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION;
+ cmd.cmdarg = 0;
+ cmd.resp_type = MMC_RSP_R1b;
+ if (mmc_send_cmd(mmc, &cmd, NULL)) {
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
+ printf("mmc fail to send stop cmd\n");
+#endif
+ return 0;
+ }
+ }
+
+ return blkcnt;
+}
+
+static ulong mmc_bread(int dev_num, lbaint_t start, lbaint_t blkcnt, void *dst)
+{
+ lbaint_t cur, blocks_todo = blkcnt;
+
+ if (blkcnt == 0)
+ return 0;
+
+ struct mmc *mmc = find_mmc_device(dev_num);
+ if (!mmc)
+ return 0;
+
+ if ((start + blkcnt) > mmc->block_dev.lba) {
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
+ printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
+ start + blkcnt, mmc->block_dev.lba);
+#endif
+ return 0;
+ }
+
+ if (mmc_set_blocklen(mmc, mmc->read_bl_len))
+ return 0;
+
+ do {
+ cur = (blocks_todo > mmc->b_max) ? mmc->b_max : blocks_todo;
+ if(mmc_read_blocks(mmc, dst, start, cur) != cur)
+ return 0;
+ blocks_todo -= cur;
+ start += cur;
+ dst += cur * mmc->read_bl_len;
+ } while (blocks_todo > 0);
+
+ return blkcnt;
+}
+
+static int mmc_go_idle(struct mmc *mmc)
+{
+ struct mmc_cmd cmd;
+ int err;
+
+ udelay(1000);
+
+ cmd.cmdidx = MMC_CMD_GO_IDLE_STATE;
+ cmd.cmdarg = 0;
+ cmd.resp_type = MMC_RSP_NONE;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+
+ if (err)
+ return err;
+
+ udelay(2000);
+
+ return 0;
+}
+
+static int sd_send_op_cond(struct mmc *mmc)
+{
+ int timeout = 1000;
+ int err;
+ struct mmc_cmd cmd;
+
+ do {
+ cmd.cmdidx = MMC_CMD_APP_CMD;
+ cmd.resp_type = MMC_RSP_R1;
+ cmd.cmdarg = 0;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+
+ if (err)
+ return err;
+
+ cmd.cmdidx = SD_CMD_APP_SEND_OP_COND;
+ cmd.resp_type = MMC_RSP_R3;
+
+ /*
+ * Most cards do not answer if some reserved bits
+ * in the ocr are set. However, Some controller
+ * can set bit 7 (reserved for low voltages), but
+ * how to manage low voltages SD card is not yet
+ * specified.
+ */
+ cmd.cmdarg = mmc_host_is_spi(mmc) ? 0 :
+ (mmc->voltages & 0xff8000);
+
+ if (mmc->version == SD_VERSION_2)
+ cmd.cmdarg |= OCR_HCS;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+
+ if (err)
+ return err;
+
+ udelay(1000);
+ } while ((!(cmd.response[0] & OCR_BUSY)) && timeout--);
+
+ if (timeout <= 0)
+ return UNUSABLE_ERR;
+
+ if (mmc->version != SD_VERSION_2)
+ mmc->version = SD_VERSION_1_0;
+
+ if (mmc_host_is_spi(mmc)) { /* read OCR for spi */
+ cmd.cmdidx = MMC_CMD_SPI_READ_OCR;
+ cmd.resp_type = MMC_RSP_R3;
+ cmd.cmdarg = 0;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+
+ if (err)
+ return err;
+ }
+
+ mmc->ocr = cmd.response[0];
+
+ mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS);
+ mmc->rca = 0;
+
+ return 0;
+}
+
+/* We pass in the cmd since otherwise the init seems to fail */
+static int mmc_send_op_cond_iter(struct mmc *mmc, struct mmc_cmd *cmd,
+ int use_arg)
+{
+ int err;
+
+ cmd->cmdidx = MMC_CMD_SEND_OP_COND;
+ cmd->resp_type = MMC_RSP_R3;
+ cmd->cmdarg = 0;
+ if (use_arg && !mmc_host_is_spi(mmc)) {
+ cmd->cmdarg =
+ (mmc->voltages &
+ (mmc->op_cond_response & OCR_VOLTAGE_MASK)) |
+ (mmc->op_cond_response & OCR_ACCESS_MODE);
+
+ if (mmc->host_caps & MMC_MODE_HC)
+ cmd->cmdarg |= OCR_HCS;
+ }
+ err = mmc_send_cmd(mmc, cmd, NULL);
+ if (err)
+ return err;
+ mmc->op_cond_response = cmd->response[0];
+ return 0;
+}
+
+int mmc_send_op_cond(struct mmc *mmc)
+{
+ struct mmc_cmd cmd;
+ int err, i;
+
+ /* Some cards seem to need this */
+ mmc_go_idle(mmc);
+
+ /* Asking to the card its capabilities */
+ mmc->op_cond_pending = 1;
+ for (i = 0; i < 2; i++) {
+ err = mmc_send_op_cond_iter(mmc, &cmd, i != 0);
+ if (err)
+ return err;
+
+ /* exit if not busy (flag seems to be inverted) */
+ if (mmc->op_cond_response & OCR_BUSY)
+ return 0;
+ }
+ return IN_PROGRESS;
+}
+
+int mmc_complete_op_cond(struct mmc *mmc)
+{
+ struct mmc_cmd cmd;
+ int timeout = 1000;
+ uint start;
+ int err;
+
+ mmc->op_cond_pending = 0;
+ start = get_timer(0);
+ do {
+ err = mmc_send_op_cond_iter(mmc, &cmd, 1);
+ if (err)
+ return err;
+ if (get_timer(start) > timeout)
+ return UNUSABLE_ERR;
+ udelay(100);
+ } while (!(mmc->op_cond_response & OCR_BUSY));
+
+ if (mmc_host_is_spi(mmc)) { /* read OCR for spi */
+ cmd.cmdidx = MMC_CMD_SPI_READ_OCR;
+ cmd.resp_type = MMC_RSP_R3;
+ cmd.cmdarg = 0;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+
+ if (err)
+ return err;
+ }
+
+ mmc->version = MMC_VERSION_UNKNOWN;
+ mmc->ocr = cmd.response[0];
+
+ mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS);
+ mmc->rca = 0;
+
+ return 0;
+}
+
+
+static int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd)
+{
+ struct mmc_cmd cmd;
+ struct mmc_data data;
+ int err;
+
+ /* Get the Card Status Register */
+ cmd.cmdidx = MMC_CMD_SEND_EXT_CSD;
+ cmd.resp_type = MMC_RSP_R1;
+ cmd.cmdarg = 0;
+
+ data.dest = (char *)ext_csd;
+ data.blocks = 1;
+ data.blocksize = MMC_MAX_BLOCK_LEN;
+ data.flags = MMC_DATA_READ;
+
+ err = mmc_send_cmd(mmc, &cmd, &data);
+
+ return err;
+}
+
+
+static int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value)
+{
+ struct mmc_cmd cmd;
+ int timeout = 1000;
+ int ret;
+
+ cmd.cmdidx = MMC_CMD_SWITCH;
+ cmd.resp_type = MMC_RSP_R1b;
+ cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+ (index << 16) |
+ (value << 8);
+
+ ret = mmc_send_cmd(mmc, &cmd, NULL);
+
+ /* Waiting for the ready status */
+ if (!ret)
+ ret = mmc_send_status(mmc, timeout);
+
+ return ret;
+
+}
+
+static int mmc_change_freq(struct mmc *mmc)
+{
+ ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
+ char cardtype;
+ int err;
+
+ mmc->card_caps = 0;
+
+ if (mmc_host_is_spi(mmc))
+ return 0;
+
+ /* Only version 4 supports high-speed */
+ if (mmc->version < MMC_VERSION_4)
+ return 0;
+
+ err = mmc_send_ext_csd(mmc, ext_csd);
+
+ if (err)
+ return err;
+
+ cardtype = ext_csd[EXT_CSD_CARD_TYPE] & 0xf;
+
+ err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, 1);
+
+ if (err)
+ return err;
+
+ /* Now check to see that it worked */
+ err = mmc_send_ext_csd(mmc, ext_csd);
+
+ if (err)
+ return err;
+
+ /* No high-speed support */
+ if (!ext_csd[EXT_CSD_HS_TIMING])
+ return 0;
+
+ /* High Speed is set, there are two types: 52MHz and 26MHz */
+ if (cardtype & MMC_HS_52MHZ)
+ mmc->card_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
+ else
+ mmc->card_caps |= MMC_MODE_HS;
+
+ return 0;
+}
+
+static int mmc_set_capacity(struct mmc *mmc, int part_num)
+{
+ switch (part_num) {
+ case 0:
+ mmc->capacity = mmc->capacity_user;
+ break;
+ case 1:
+ case 2:
+ mmc->capacity = mmc->capacity_boot;
+ break;
+ case 3:
+ mmc->capacity = mmc->capacity_rpmb;
+ break;
+ case 4:
+ case 5:
+ case 6:
+ case 7:
+ mmc->capacity = mmc->capacity_gp[part_num - 4];
+ break;
+ default:
+ return -1;
+ }
+
+ mmc->block_dev.lba = lldiv(mmc->capacity, mmc->read_bl_len);
+
+ return 0;
+}
+
+int mmc_switch_part(int dev_num, unsigned int part_num)
+{
+ struct mmc *mmc = find_mmc_device(dev_num);
+ int ret;
+
+ if (!mmc)
+ return -1;
+
+ ret = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONF,
+ (mmc->part_config & ~PART_ACCESS_MASK)
+ | (part_num & PART_ACCESS_MASK));
+ if (ret)
+ return ret;
+
+ return mmc_set_capacity(mmc, part_num);
+}
+
+int mmc_getcd(struct mmc *mmc)
+{
+ int cd;
+
+ cd = board_mmc_getcd(mmc);
+
+ if (cd < 0) {
+ if (mmc->getcd)
+ cd = mmc->getcd(mmc);
+ else
+ cd = 1;
+ }
+
+ return cd;
+}
+
+static int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp)
+{
+ struct mmc_cmd cmd;
+ struct mmc_data data;
+
+ /* Switch the frequency */
+ cmd.cmdidx = SD_CMD_SWITCH_FUNC;
+ cmd.resp_type = MMC_RSP_R1;
+ cmd.cmdarg = (mode << 31) | 0xffffff;
+ cmd.cmdarg &= ~(0xf << (group * 4));
+ cmd.cmdarg |= value << (group * 4);
+
+ data.dest = (char *)resp;
+ data.blocksize = 64;
+ data.blocks = 1;
+ data.flags = MMC_DATA_READ;
+
+ return mmc_send_cmd(mmc, &cmd, &data);
+}
+
+
+static int sd_change_freq(struct mmc *mmc)
+{
+ int err;
+ struct mmc_cmd cmd;
+ ALLOC_CACHE_ALIGN_BUFFER(uint, scr, 2);
+ ALLOC_CACHE_ALIGN_BUFFER(uint, switch_status, 16);
+ struct mmc_data data;
+ int timeout;
+
+ mmc->card_caps = 0;
+
+ if (mmc_host_is_spi(mmc))
+ return 0;
+
+ /* Read the SCR to find out if this card supports higher speeds */
+ cmd.cmdidx = MMC_CMD_APP_CMD;
+ cmd.resp_type = MMC_RSP_R1;
+ cmd.cmdarg = mmc->rca << 16;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+
+ if (err)
+ return err;
+
+ cmd.cmdidx = SD_CMD_APP_SEND_SCR;
+ cmd.resp_type = MMC_RSP_R1;
+ cmd.cmdarg = 0;
+
+ timeout = 3;
+
+retry_scr:
+ data.dest = (char *)scr;
+ data.blocksize = 8;
+ data.blocks = 1;
+ data.flags = MMC_DATA_READ;
+
+ err = mmc_send_cmd(mmc, &cmd, &data);
+
+ if (err) {
+ if (timeout--)
+ goto retry_scr;
+
+ return err;
+ }
+
+ mmc->scr[0] = __be32_to_cpu(scr[0]);
+ mmc->scr[1] = __be32_to_cpu(scr[1]);
+
+ switch ((mmc->scr[0] >> 24) & 0xf) {
+ case 0:
+ mmc->version = SD_VERSION_1_0;
+ break;
+ case 1:
+ mmc->version = SD_VERSION_1_10;
+ break;
+ case 2:
+ mmc->version = SD_VERSION_2;
+ if ((mmc->scr[0] >> 15) & 0x1)
+ mmc->version = SD_VERSION_3;
+ break;
+ default:
+ mmc->version = SD_VERSION_1_0;
+ break;
+ }
+
+ if (mmc->scr[0] & SD_DATA_4BIT)
+ mmc->card_caps |= MMC_MODE_4BIT;
+
+ /* Version 1.0 doesn't support switching */
+ if (mmc->version == SD_VERSION_1_0)
+ return 0;
+
+ timeout = 4;
+ while (timeout--) {
+ err = sd_switch(mmc, SD_SWITCH_CHECK, 0, 1,
+ (u8 *)switch_status);
+
+ if (err)
+ return err;
+
+ /* The high-speed function is busy. Try again */
+ if (!(__be32_to_cpu(switch_status[7]) & SD_HIGHSPEED_BUSY))
+ break;
+ }
+
+ /* If high-speed isn't supported, we return */
+ if (!(__be32_to_cpu(switch_status[3]) & SD_HIGHSPEED_SUPPORTED))
+ return 0;
+
+ /*
+ * If the host doesn't support SD_HIGHSPEED, do not switch card to
+ * HIGHSPEED mode even if the card support SD_HIGHSPPED.
+ * This can avoid furthur problem when the card runs in different
+ * mode between the host.
+ */
+ if (!((mmc->host_caps & MMC_MODE_HS_52MHz) &&
+ (mmc->host_caps & MMC_MODE_HS)))
+ return 0;
+
+ err = sd_switch(mmc, SD_SWITCH_SWITCH, 0, 1, (u8 *)switch_status);
+
+ if (err)
+ return err;
+
+ if ((__be32_to_cpu(switch_status[4]) & 0x0f000000) == 0x01000000)
+ mmc->card_caps |= MMC_MODE_HS;
+
+ return 0;
+}
+
+/* frequency bases */
+/* divided by 10 to be nice to platforms without floating point */
+static const int fbase[] = {
+ 10000,
+ 100000,
+ 1000000,
+ 10000000,
+};
+
+/* Multiplier values for TRAN_SPEED. Multiplied by 10 to be nice
+ * to platforms without floating point.
+ */
+static const int multipliers[] = {
+ 0, /* reserved */
+ 10,
+ 12,
+ 13,
+ 15,
+ 20,
+ 25,
+ 30,
+ 35,
+ 40,
+ 45,
+ 50,
+ 55,
+ 60,
+ 70,
+ 80,
+};
+
+static void mmc_set_ios(struct mmc *mmc)
+{
+ mmc->set_ios(mmc);
+}
+
+static void mmc_set_74_clk(struct mmc *mmc)
+{
+ mmc->set_74_clk(mmc);
+}
+
+void mmc_set_clock(struct mmc *mmc, uint clock)
+{
+ if (clock > mmc->f_max)
+ clock = mmc->f_max;
+
+ if (clock < mmc->f_min)
+ clock = mmc->f_min;
+
+ mmc->clock = clock;
+
+ mmc_set_ios(mmc);
+}
+
+static void mmc_set_bus_width(struct mmc *mmc, uint width)
+{
+ mmc->bus_width = width;
+
+ mmc_set_ios(mmc);
+}
+
+static int mmc_startup(struct mmc *mmc)
+{
+ int err, i;
+ uint mult, freq;
+ u64 cmult, csize, capacity;
+ struct mmc_cmd cmd;
+ ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
+ ALLOC_CACHE_ALIGN_BUFFER(u8, test_csd, MMC_MAX_BLOCK_LEN);
+ int timeout = 1000;
+
+#ifdef CONFIG_MMC_SPI_CRC_ON
+ if (mmc_host_is_spi(mmc)) { /* enable CRC check for spi */
+ cmd.cmdidx = MMC_CMD_SPI_CRC_ON_OFF;
+ cmd.resp_type = MMC_RSP_R1;
+ cmd.cmdarg = 1;
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+
+ if (err)
+ return err;
+ }
+#endif
+
+ /* Put the Card in Identify Mode */
+ cmd.cmdidx = mmc_host_is_spi(mmc) ? MMC_CMD_SEND_CID :
+ MMC_CMD_ALL_SEND_CID; /* cmd not supported in spi */
+ cmd.resp_type = MMC_RSP_R2;
+ cmd.cmdarg = 0;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+
+ if (err)
+ return err;
+
+ memcpy(mmc->cid, cmd.response, 16);
+
+ /*
+ * For MMC cards, set the Relative Address.
+ * For SD cards, get the Relatvie Address.
+ * This also puts the cards into Standby State
+ */
+ if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */
+ cmd.cmdidx = SD_CMD_SEND_RELATIVE_ADDR;
+ cmd.cmdarg = mmc->rca << 16;
+ cmd.resp_type = MMC_RSP_R6;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+
+ if (err)
+ return err;
+
+ if (IS_SD(mmc))
+ mmc->rca = (cmd.response[0] >> 16) & 0xffff;
+ }
+
+ /* Get the Card-Specific Data */
+ cmd.cmdidx = MMC_CMD_SEND_CSD;
+ cmd.resp_type = MMC_RSP_R2;
+ cmd.cmdarg = mmc->rca << 16;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+
+ /* Waiting for the ready status */
+ mmc_send_status(mmc, timeout);
+
+ if (err)
+ return err;
+
+ mmc->csd[0] = cmd.response[0];
+ mmc->csd[1] = cmd.response[1];
+ mmc->csd[2] = cmd.response[2];
+ mmc->csd[3] = cmd.response[3];
+
+ if (mmc->version == MMC_VERSION_UNKNOWN) {
+ int version = (cmd.response[0] >> 26) & 0xf;
+
+ switch (version) {
+ case 0:
+ mmc->version = MMC_VERSION_1_2;
+ break;
+ case 1:
+ mmc->version = MMC_VERSION_1_4;
+ break;
+ case 2:
+ mmc->version = MMC_VERSION_2_2;
+ break;
+ case 3:
+ mmc->version = MMC_VERSION_3;
+ break;
+ case 4:
+ mmc->version = MMC_VERSION_4;
+ break;
+ default:
+ mmc->version = MMC_VERSION_1_2;
+ break;
+ }
+ }
+
+ /* divide frequency by 10, since the mults are 10x bigger */
+ freq = fbase[(cmd.response[0] & 0x7)];
+ mult = multipliers[((cmd.response[0] >> 3) & 0xf)];
+
+ mmc->tran_speed = freq * mult;
+
+ mmc->dsr_imp = ((cmd.response[1] >> 12) & 0x1);
+ mmc->read_bl_len = 1 << ((cmd.response[1] >> 16) & 0xf);
+
+ if (IS_SD(mmc))
+ mmc->write_bl_len = mmc->read_bl_len;
+ else
+ mmc->write_bl_len = 1 << ((cmd.response[3] >> 22) & 0xf);
+
+ if (mmc->high_capacity) {
+ csize = (mmc->csd[1] & 0x3f) << 16
+ | (mmc->csd[2] & 0xffff0000) >> 16;
+ cmult = 8;
+ } else {
+ csize = (mmc->csd[1] & 0x3ff) << 2
+ | (mmc->csd[2] & 0xc0000000) >> 30;
+ cmult = (mmc->csd[2] & 0x00038000) >> 15;
+ }
+
+ mmc->capacity_user = (csize + 1) << (cmult + 2);
+ mmc->capacity_user *= mmc->read_bl_len;
+ mmc->capacity_boot = 0;
+ mmc->capacity_rpmb = 0;
+ for (i = 0; i < 4; i++)
+ mmc->capacity_gp[i] = 0;
+
+ if (mmc->read_bl_len > MMC_MAX_BLOCK_LEN)
+ mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
+
+ if (mmc->write_bl_len > MMC_MAX_BLOCK_LEN)
+ mmc->write_bl_len = MMC_MAX_BLOCK_LEN;
+
+ if ((mmc->dsr_imp) && (0xffffffff != mmc->dsr)) {
+ cmd.cmdidx = MMC_CMD_SET_DSR;
+ cmd.cmdarg = (mmc->dsr & 0xffff) << 16;
+ cmd.resp_type = MMC_RSP_NONE;
+ if (mmc_send_cmd(mmc, &cmd, NULL))
+ printf("MMC: SET_DSR failed\n");
+ }
+
+ /* Select the card, and put it into Transfer Mode */
+ if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */
+ cmd.cmdidx = MMC_CMD_SELECT_CARD;
+ cmd.resp_type = MMC_RSP_R1;
+ cmd.cmdarg = mmc->rca << 16;
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+
+ if (err)
+ return err;
+ }
+
+ /*
+ * For SD, its erase group is always one sector
+ */
+ mmc->erase_grp_size = 1;
+ mmc->part_config = MMCPART_NOAVAILABLE;
+ if (!IS_SD(mmc) && (mmc->version >= MMC_VERSION_4)) {
+ /* check ext_csd version and capacity */
+ err = mmc_send_ext_csd(mmc, ext_csd);
+ if (!err && (ext_csd[EXT_CSD_REV] >= 2)) {
+ /*
+ * According to the JEDEC Standard, the value of
+ * ext_csd's capacity is valid if the value is more
+ * than 2GB
+ */
+ capacity = ext_csd[EXT_CSD_SEC_CNT] << 0
+ | ext_csd[EXT_CSD_SEC_CNT + 1] << 8
+ | ext_csd[EXT_CSD_SEC_CNT + 2] << 16
+ | ext_csd[EXT_CSD_SEC_CNT + 3] << 24;
+ capacity *= MMC_MAX_BLOCK_LEN;
+ if ((capacity >> 20) > 2 * 1024)
+ mmc->capacity_user = capacity;
+ }
+
+ switch (ext_csd[EXT_CSD_REV]) {
+ case 1:
+ mmc->version = MMC_VERSION_4_1;
+ break;
+ case 2:
+ mmc->version = MMC_VERSION_4_2;
+ break;
+ case 3:
+ mmc->version = MMC_VERSION_4_3;
+ break;
+ case 5:
+ mmc->version = MMC_VERSION_4_41;
+ break;
+ case 6:
+ mmc->version = MMC_VERSION_4_5;
+ break;
+ }
+
+ /*
+ * Host needs to enable ERASE_GRP_DEF bit if device is
+ * partitioned. This bit will be lost every time after a reset
+ * or power off. This will affect erase size.
+ */
+ if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) &&
+ (ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE] & PART_ENH_ATTRIB)) {
+ err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_ERASE_GROUP_DEF, 1);
+
+ if (err)
+ return err;
+
+ /* Read out group size from ext_csd */
+ mmc->erase_grp_size =
+ ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] *
+ MMC_MAX_BLOCK_LEN * 1024;
+ } else {
+ /* Calculate the group size from the csd value. */
+ int erase_gsz, erase_gmul;
+ erase_gsz = (mmc->csd[2] & 0x00007c00) >> 10;
+ erase_gmul = (mmc->csd[2] & 0x000003e0) >> 5;
+ mmc->erase_grp_size = (erase_gsz + 1)
+ * (erase_gmul + 1);
+ }
+
+ /* store the partition info of emmc */
+ if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) ||
+ ext_csd[EXT_CSD_BOOT_MULT])
+ mmc->part_config = ext_csd[EXT_CSD_PART_CONF];
+
+ mmc->capacity_boot = ext_csd[EXT_CSD_BOOT_MULT] << 17;
+
+ mmc->capacity_rpmb = ext_csd[EXT_CSD_RPMB_MULT] << 17;
+
+ for (i = 0; i < 4; i++) {
+ int idx = EXT_CSD_GP_SIZE_MULT + i * 3;
+ mmc->capacity_gp[i] = (ext_csd[idx + 2] << 16) +
+ (ext_csd[idx + 1] << 8) + ext_csd[idx];
+ mmc->capacity_gp[i] *=
+ ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
+ mmc->capacity_gp[i] *= ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
+ }
+ }
+
+ err = mmc_set_capacity(mmc, mmc->part_num);
+ if (err)
+ return err;
+
+ if (IS_SD(mmc))
+ err = sd_change_freq(mmc);
+ else
+ err = mmc_change_freq(mmc);
+
+ if (err)
+ return err;
+
+ /* Restrict card's capabilities by what the host can do */
+ mmc->card_caps &= mmc->host_caps;
+
+ if (IS_SD(mmc)) {
+ if (mmc->card_caps & MMC_MODE_4BIT) {
+ cmd.cmdidx = MMC_CMD_APP_CMD;
+ cmd.resp_type = MMC_RSP_R1;
+ cmd.cmdarg = mmc->rca << 16;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err)
+ return err;
+
+ cmd.cmdidx = SD_CMD_APP_SET_BUS_WIDTH;
+ cmd.resp_type = MMC_RSP_R1;
+ cmd.cmdarg = 2;
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err)
+ return err;
+
+ mmc_set_bus_width(mmc, 4);
+ }
+
+ if (mmc->card_caps & MMC_MODE_HS)
+ mmc->tran_speed = 50000000;
+ else
+ mmc->tran_speed = 25000000;
+ } else {
+ int idx;
+
+ /* An array of possible bus widths in order of preference */
+ static unsigned ext_csd_bits[] = {
+ EXT_CSD_BUS_WIDTH_8,
+ EXT_CSD_BUS_WIDTH_4,
+ EXT_CSD_BUS_WIDTH_1,
+ };
+
+ /* An array to map CSD bus widths to host cap bits */
+ static unsigned ext_to_hostcaps[] = {
+ [EXT_CSD_BUS_WIDTH_4] = MMC_MODE_4BIT,
+ [EXT_CSD_BUS_WIDTH_8] = MMC_MODE_8BIT,
+ };
+
+ /* An array to map chosen bus width to an integer */
+ static unsigned widths[] = {
+ 8, 4, 1,
+ };
+
+ for (idx=0; idx < ARRAY_SIZE(ext_csd_bits); idx++) {
+ unsigned int extw = ext_csd_bits[idx];
+
+ /*
+ * Check to make sure the controller supports
+ * this bus width, if it's more than 1
+ */
+ if (extw != EXT_CSD_BUS_WIDTH_1 &&
+ !(mmc->host_caps & ext_to_hostcaps[extw]))
+ continue;
+
+ err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_BUS_WIDTH, extw);
+
+ if (err)
+ continue;
+
+ mmc_set_bus_width(mmc, widths[idx]);
+
+ err = mmc_send_ext_csd(mmc, test_csd);
+ if (!err && ext_csd[EXT_CSD_PARTITIONING_SUPPORT] \
+ == test_csd[EXT_CSD_PARTITIONING_SUPPORT]
+ && ext_csd[EXT_CSD_ERASE_GROUP_DEF] \
+ == test_csd[EXT_CSD_ERASE_GROUP_DEF] \
+ && ext_csd[EXT_CSD_REV] \
+ == test_csd[EXT_CSD_REV]
+ && ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] \
+ == test_csd[EXT_CSD_HC_ERASE_GRP_SIZE]
+ && memcmp(&ext_csd[EXT_CSD_SEC_CNT], \
+ &test_csd[EXT_CSD_SEC_CNT], 4) == 0) {
+
+ mmc->card_caps |= ext_to_hostcaps[extw];
+ break;
+ }
+ }
+
+ if (mmc->card_caps & MMC_MODE_HS) {
+ if (mmc->card_caps & MMC_MODE_HS_52MHz)
+ mmc->tran_speed = 52000000;
+ else
+ mmc->tran_speed = 26000000;
+ }
+ }
+
+ mmc_set_clock(mmc, mmc->tran_speed);
+
+ /* fill in device description */
+ mmc->block_dev.lun = 0;
+ mmc->block_dev.type = 0;
+ mmc->block_dev.blksz = mmc->read_bl_len;
+ mmc->block_dev.log2blksz = LOG2(mmc->block_dev.blksz);
+ mmc->block_dev.lba = lldiv(mmc->capacity, mmc->read_bl_len);
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
+ sprintf(mmc->block_dev.vendor, "Man %06x Snr %04x%04x",
+ mmc->cid[0] >> 24, (mmc->cid[2] & 0xffff),
+ (mmc->cid[3] >> 16) & 0xffff);
+ sprintf(mmc->block_dev.product, "%c%c%c%c%c%c", mmc->cid[0] & 0xff,
+ (mmc->cid[1] >> 24), (mmc->cid[1] >> 16) & 0xff,
+ (mmc->cid[1] >> 8) & 0xff, mmc->cid[1] & 0xff,
+ (mmc->cid[2] >> 24) & 0xff);
+ sprintf(mmc->block_dev.revision, "%d.%d", (mmc->cid[2] >> 20) & 0xf,
+ (mmc->cid[2] >> 16) & 0xf);
+#else
+ mmc->block_dev.vendor[0] = 0;
+ mmc->block_dev.product[0] = 0;
+ mmc->block_dev.revision[0] = 0;
+#endif
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT)
+ init_part(&mmc->block_dev);
+#endif
+
+ return 0;
+}
+
+static int mmc_send_if_cond(struct mmc *mmc)
+{
+ struct mmc_cmd cmd;
+ int err;
+
+ cmd.cmdidx = SD_CMD_SEND_IF_COND;
+ /* We set the bit if the host supports voltages between 2.7 and 3.6 V */
+ cmd.cmdarg = ((mmc->voltages & 0xff8000) != 0) << 8 | 0xaa;
+ cmd.resp_type = MMC_RSP_R7;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+
+ if (err)
+ return err;
+
+ if ((cmd.response[0] & 0xff) != 0xaa)
+ return UNUSABLE_ERR;
+ else
+ mmc->version = SD_VERSION_2;
+
+ return 0;
+}
+
+static int mmc_dev_init(int dev_num);
+int mmc_register(struct mmc *mmc)
+{
+ /* Setup dsr related values */
+ mmc->dsr_imp = 0;
+ mmc->dsr = 0xffffffff;
+ /* Setup the universal parts of the block interface just once */
+ mmc->block_dev.if_type = IF_TYPE_MMC;
+ mmc->block_dev.dev = cur_dev_num++;
+ mmc->block_dev.removable = 1;
+ mmc->block_dev.block_read = mmc_bread;
+ mmc->block_dev.block_write = mmc_bwrite;
+ mmc->block_dev.block_erase = mmc_berase;
+ mmc->block_dev.dev_init = mmc_dev_init;
+ if (!mmc->b_max)
+ mmc->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
+
+ INIT_LIST_HEAD (&mmc->link);
+
+ list_add_tail (&mmc->link, &mmc_devices);
+
+ return 0;
+}
+
+#ifdef CONFIG_PARTITIONS
+block_dev_desc_t *mmc_get_dev(int dev)
+{
+ struct mmc *mmc = find_mmc_device(dev);
+ if (!mmc || mmc_init(mmc))
+ return NULL;
+
+ return &mmc->block_dev;
+}
+#endif
+
+int mmc_start_init(struct mmc *mmc)
+{
+ int err;
+
+ if (mmc_getcd(mmc) == 0) {
+ mmc->has_init = 0;
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
+ printf("MMC: no card present\n");
+#endif
+ return NO_CARD_ERR;
+ }
+
+ if (mmc->has_init)
+ return 0;
+
+ err = mmc->init(mmc);
+
+ if (err)
+ return err;
+
+ mmc_set_bus_width(mmc, 1);
+ mmc_set_clock(mmc, 1);
+ mmc_set_74_clk(mmc);
+
+ /* Reset the Card */
+ err = mmc_go_idle(mmc);
+
+ if (err)
+ return err;
+
+ /* The internal partition reset to user partition(0) at every CMD0*/
+ mmc->part_num = 0;
+
+ /* Test for SD version 2 */
+ err = mmc_send_if_cond(mmc);
+
+ /* Now try to get the SD card's operating condition */
+ err = sd_send_op_cond(mmc);
+
+ /* If the command timed out, we check for an MMC card */
+ if (err == TIMEOUT) {
+ err = mmc_send_op_cond(mmc);
+
+ if (err && err != IN_PROGRESS) {
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
+ printf("Card did not respond to voltage select!\n");
+#endif
+ return UNUSABLE_ERR;
+ }
+ }
+
+ if (err == IN_PROGRESS)
+ mmc->init_in_progress = 1;
+
+ return err;
+}
+
+static int mmc_complete_init(struct mmc *mmc)
+{
+ int err = 0;
+
+ if (mmc->op_cond_pending)
+ err = mmc_complete_op_cond(mmc);
+
+ if (!err)
+ err = mmc_startup(mmc);
+ if (err)
+ mmc->has_init = 0;
+ else
+ mmc->has_init = 1;
+ mmc->init_in_progress = 0;
+ return err;
+}
+
+int mmc_init(struct mmc *mmc)
+{
+ int err = IN_PROGRESS;
+ unsigned start = get_timer(0);
+
+ if (mmc->has_init)
+ return 0;
+ if (!mmc->init_in_progress)
+ err = mmc_start_init(mmc);
+
+ if (!err || err == IN_PROGRESS)
+ err = mmc_complete_init(mmc);
+ debug("%s: %d, time %lu\n", __func__, err, get_timer(start));
+ return err;
+}
+
+int mmc_set_dsr(struct mmc *mmc, u16 val)
+{
+ mmc->dsr = val;
+ return 0;
+}
+
+static int mmc_dev_init(int dev_num)
+{
+ struct mmc *mmc = find_mmc_device(dev_num);
+ if (!mmc)
+ return -1;
+
+ return mmc_init(mmc);
+}
+
+/*
+ * CPU and board-specific MMC initializations. Aliased function
+ * signals caller to move on
+ */
+static int __def_mmc_init(bd_t *bis)
+{
+ return -1;
+}
+
+int cpu_mmc_init(bd_t *bis) __attribute__((weak, alias("__def_mmc_init")));
+int board_mmc_init(bd_t *bis) __attribute__((weak, alias("__def_mmc_init")));
+
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
+
+void print_mmc_devices(char separator)
+{
+ struct mmc *m;
+ struct list_head *entry;
+
+ list_for_each(entry, &mmc_devices) {
+ m = list_entry(entry, struct mmc, link);
+
+ printf("%s: %d", m->name, m->block_dev.dev);
+
+ if (entry->next != &mmc_devices)
+ printf("%c ", separator);
+ }
+
+ printf("\n");
+}
+
+#else
+void print_mmc_devices(char separator) { }
+#endif
+
+int get_mmc_num(void)
+{
+ return cur_dev_num;
+}
+
+void mmc_set_preinit(struct mmc *mmc, int preinit)
+{
+ mmc->preinit = preinit;
+}
+
+static void do_preinit(void)
+{
+ struct mmc *m;
+ struct list_head *entry;
+
+ list_for_each(entry, &mmc_devices) {
+ m = list_entry(entry, struct mmc, link);
+
+ if (m->preinit)
+ mmc_start_init(m);
+ }
+}
+
+
+int mmc_initialize(bd_t *bis)
+{
+ INIT_LIST_HEAD (&mmc_devices);
+ cur_dev_num = 0;
+
+ if (board_mmc_init(bis) < 0)
+ cpu_mmc_init(bis);
+
+#ifndef CONFIG_SPL_BUILD
+ print_mmc_devices(',');
+#endif
+
+ do_preinit();
+ return 0;
+}
+
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+/*
+ * This function changes the size of boot partition and the size of rpmb
+ * partition present on EMMC devices.
+ *
+ * Input Parameters:
+ * struct *mmc: pointer for the mmc device strcuture
+ * bootsize: size of boot partition
+ * rpmbsize: size of rpmb partition
+ *
+ * Returns 0 on success.
+ */
+
+int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
+ unsigned long rpmbsize)
+{
+ int err;
+ struct mmc_cmd cmd;
+
+ /* Only use this command for raw EMMC moviNAND. Enter backdoor mode */
+ cmd.cmdidx = MMC_CMD_RES_MAN;
+ cmd.resp_type = MMC_RSP_R1b;
+ cmd.cmdarg = MMC_CMD62_ARG1;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ debug("mmc_boot_partition_size_change: Error1 = %d\n", err);
+ return err;
+ }
+
+ /* Boot partition changing mode */
+ cmd.cmdidx = MMC_CMD_RES_MAN;
+ cmd.resp_type = MMC_RSP_R1b;
+ cmd.cmdarg = MMC_CMD62_ARG2;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ debug("mmc_boot_partition_size_change: Error2 = %d\n", err);
+ return err;
+ }
+ /* boot partition size is multiple of 128KB */
+ bootsize = (bootsize * 1024) / 128;
+
+ /* Arg: boot partition size */
+ cmd.cmdidx = MMC_CMD_RES_MAN;
+ cmd.resp_type = MMC_RSP_R1b;
+ cmd.cmdarg = bootsize;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ debug("mmc_boot_partition_size_change: Error3 = %d\n", err);
+ return err;
+ }
+ /* RPMB partition size is multiple of 128KB */
+ rpmbsize = (rpmbsize * 1024) / 128;
+ /* Arg: RPMB partition size */
+ cmd.cmdidx = MMC_CMD_RES_MAN;
+ cmd.resp_type = MMC_RSP_R1b;
+ cmd.cmdarg = rpmbsize;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ debug("mmc_boot_partition_size_change: Error4 = %d\n", err);
+ return err;
+ }
+ return 0;
+}
+
+/*
+ * This function shall form and send the commands to open / close the
+ * boot partition specified by user.
+ *
+ * Input Parameters:
+ * ack: 0x0 - No boot acknowledge sent (default)
+ * 0x1 - Boot acknowledge sent during boot operation
+ * part_num: User selects boot data that will be sent to master
+ * 0x0 - Device not boot enabled (default)
+ * 0x1 - Boot partition 1 enabled for boot
+ * 0x2 - Boot partition 2 enabled for boot
+ * access: User selects partitions to access
+ * 0x0 : No access to boot partition (default)
+ * 0x1 : R/W boot partition 1
+ * 0x2 : R/W boot partition 2
+ * 0x3 : R/W Replay Protected Memory Block (RPMB)
+ *
+ * Returns 0 on success.
+ */
+int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access)
+{
+ int err;
+ struct mmc_cmd cmd;
+
+ /* Boot ack enable, boot partition enable , boot partition access */
+ cmd.cmdidx = MMC_CMD_SWITCH;
+ cmd.resp_type = MMC_RSP_R1b;
+
+ cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+ (EXT_CSD_PART_CONF << 16) |
+ ((EXT_CSD_BOOT_ACK(ack) |
+ EXT_CSD_BOOT_PART_NUM(part_num) |
+ EXT_CSD_PARTITION_ACCESS(access)) << 8);
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ if (access) {
+ debug("mmc boot partition#%d open fail:Error1 = %d\n",
+ part_num, err);
+ } else {
+ debug("mmc boot partition#%d close fail:Error = %d\n",
+ part_num, err);
+ }
+ return err;
+ }
+
+ if (access) {
+ /* 4bit transfer mode at booting time. */
+ cmd.cmdidx = MMC_CMD_SWITCH;
+ cmd.resp_type = MMC_RSP_R1b;
+
+ cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+ (EXT_CSD_BOOT_BUS_WIDTH << 16) |
+ ((1 << 0) << 8);
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ debug("mmc boot partition#%d open fail:Error2 = %d\n",
+ part_num, err);
+ return err;
+ }
+ }
+ return 0;
+}
+#endif