ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/uboot/drivers/net/phy/mv88e6352.c b/marvell/uboot/drivers/net/phy/mv88e6352.c
new file mode 100644
index 0000000..f639a42
--- /dev/null
+++ b/marvell/uboot/drivers/net/phy/mv88e6352.c
@@ -0,0 +1,302 @@
+/*
+ * (C) Copyright 2012
+ * Valentin Lontgchamp, Keymile AG, valentin.longchamp@keymile.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <asm/errno.h>
+#include <mv88e6352.h>
+
+#define SMI_HDR ((0x8 | 0x1) << 12)
+#define SMI_BUSY_MASK (0x8000)
+#define SMIRD_OP (0x2 << 10)
+#define SMIWR_OP (0x1 << 10)
+#define SMI_MASK 0x1f
+#define PORT_SHIFT 5
+
+#define COMMAND_REG 0
+#define DATA_REG 1
+
+/* global registers */
+#define GLOBAL 0x1b
+
+#define GLOBAL_STATUS 0x00
+#define PPU_STATE 0x8000
+
+#define GLOBAL_CTRL 0x04
+#define SW_RESET 0x8000
+#define PPU_ENABLE 0x4000
+
+static int sw_wait_rdy(const char *devname, u8 phy_addr)
+{
+ u16 command;
+ u32 timeout = 100;
+ int ret;
+
+ /* wait till the SMI is not busy */
+ do {
+ /* read command register */
+ ret = miiphy_read(devname, phy_addr, COMMAND_REG, &command);
+ if (ret < 0) {
+ printf("%s: Error reading command register\n",
+ __func__);
+ return ret;
+ }
+ if (timeout-- == 0) {
+ printf("Err..(%s) SMI busy timeout\n", __func__);
+ return -EFAULT;
+ }
+ } while (command & SMI_BUSY_MASK);
+
+ return 0;
+}
+
+static int sw_reg_read(const char *devname, u8 phy_addr, u8 port,
+ u8 reg, u16 *data)
+{
+ int ret;
+ u16 command;
+
+ ret = sw_wait_rdy(devname, phy_addr);
+ if (ret)
+ return ret;
+
+ command = SMI_HDR | SMIRD_OP | ((port&SMI_MASK) << PORT_SHIFT) |
+ (reg & SMI_MASK);
+ debug("%s: write to command: %#x\n", __func__, command);
+ ret = miiphy_write(devname, phy_addr, COMMAND_REG, command);
+ if (ret)
+ return ret;
+
+ ret = sw_wait_rdy(devname, phy_addr);
+ if (ret)
+ return ret;
+
+ ret = miiphy_read(devname, phy_addr, DATA_REG, data);
+
+ return ret;
+}
+
+static int sw_reg_write(const char *devname, u8 phy_addr, u8 port,
+ u8 reg, u16 data)
+{
+ int ret;
+ u16 value;
+
+ ret = sw_wait_rdy(devname, phy_addr);
+ if (ret)
+ return ret;
+
+ debug("%s: write to data: %#x\n", __func__, data);
+ ret = miiphy_write(devname, phy_addr, DATA_REG, data);
+ if (ret)
+ return ret;
+
+ value = SMI_HDR | SMIWR_OP | ((port & SMI_MASK) << PORT_SHIFT) |
+ (reg & SMI_MASK);
+ debug("%s: write to command: %#x\n", __func__, value);
+ ret = miiphy_write(devname, phy_addr, COMMAND_REG, value);
+ if (ret)
+ return ret;
+
+ ret = sw_wait_rdy(devname, phy_addr);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int ppu_enable(const char *devname, u8 phy_addr)
+{
+ int i, ret = 0;
+ u16 reg;
+
+ ret = sw_reg_read(devname, phy_addr, GLOBAL, GLOBAL_CTRL, ®);
+ if (ret) {
+ printf("%s: Error reading global ctrl reg\n", __func__);
+ return ret;
+ }
+
+ reg |= PPU_ENABLE;
+
+ ret = sw_reg_write(devname, phy_addr, GLOBAL, GLOBAL_CTRL, reg);
+ if (ret) {
+ printf("%s: Error writing global ctrl reg\n", __func__);
+ return ret;
+ }
+
+ for (i = 0; i < 1000; i++) {
+ sw_reg_read(devname, phy_addr, GLOBAL, GLOBAL_STATUS,
+ ®);
+ if ((reg & 0xc000) == 0xc000)
+ return 0;
+ udelay(1000);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int ppu_disable(const char *devname, u8 phy_addr)
+{
+ int i, ret = 0;
+ u16 reg;
+
+ ret = sw_reg_read(devname, phy_addr, GLOBAL, GLOBAL_CTRL, ®);
+ if (ret) {
+ printf("%s: Error reading global ctrl reg\n", __func__);
+ return ret;
+ }
+
+ reg &= ~PPU_ENABLE;
+
+ ret = sw_reg_write(devname, phy_addr, GLOBAL, GLOBAL_CTRL, reg);
+ if (ret) {
+ printf("%s: Error writing global ctrl reg\n", __func__);
+ return ret;
+ }
+
+ for (i = 0; i < 1000; i++) {
+ sw_reg_read(devname, phy_addr, GLOBAL, GLOBAL_STATUS,
+ ®);
+ if ((reg & 0xc000) != 0xc000)
+ return 0;
+ udelay(1000);
+ }
+
+ return -ETIMEDOUT;
+}
+
+int mv88e_sw_program(const char *devname, u8 phy_addr,
+ struct mv88e_sw_reg *regs, int regs_nb)
+{
+ int i, ret = 0;
+
+ /* first we need to disable the PPU */
+ ret = ppu_disable(devname, phy_addr);
+ if (ret) {
+ printf("%s: Error disabling PPU\n", __func__);
+ return ret;
+ }
+
+ for (i = 0; i < regs_nb; i++) {
+ ret = sw_reg_write(devname, phy_addr, regs[i].port,
+ regs[i].reg, regs[i].value);
+ if (ret) {
+ printf("%s: Error configuring switch\n", __func__);
+ ppu_enable(devname, phy_addr);
+ return ret;
+ }
+ }
+
+ /* re-enable the PPU */
+ ret = ppu_enable(devname, phy_addr);
+ if (ret) {
+ printf("%s: Error enabling PPU\n", __func__);
+ return ret;
+ }
+
+ return 0;
+}
+
+int mv88e_sw_reset(const char *devname, u8 phy_addr)
+{
+ int i, ret = 0;
+ u16 reg;
+
+ ret = sw_reg_read(devname, phy_addr, GLOBAL, GLOBAL_CTRL, ®);
+ if (ret) {
+ printf("%s: Error reading global ctrl reg\n", __func__);
+ return ret;
+ }
+
+ reg = SW_RESET | PPU_ENABLE | 0x0400;
+
+ ret = sw_reg_write(devname, phy_addr, GLOBAL, GLOBAL_CTRL, reg);
+ if (ret) {
+ printf("%s: Error writing global ctrl reg\n", __func__);
+ return ret;
+ }
+
+ for (i = 0; i < 1000; i++) {
+ sw_reg_read(devname, phy_addr, GLOBAL, GLOBAL_STATUS,
+ ®);
+ if ((reg & 0xc800) != 0xc800)
+ return 0;
+ udelay(1000);
+ }
+
+ return -ETIMEDOUT;
+}
+
+int do_mvsw_reg_read(const char *name, int argc, char * const argv[])
+{
+ u16 value = 0, phyaddr, reg, port;
+ int ret;
+
+ phyaddr = simple_strtoul(argv[1], NULL, 10);
+ port = simple_strtoul(argv[2], NULL, 10);
+ reg = simple_strtoul(argv[3], NULL, 10);
+
+ ret = sw_reg_read(name, phyaddr, port, reg, &value);
+ printf("%#x\n", value);
+
+ return ret;
+}
+
+int do_mvsw_reg_write(const char *name, int argc, char * const argv[])
+{
+ u16 value = 0, phyaddr, reg, port;
+ int ret;
+
+ phyaddr = simple_strtoul(argv[1], NULL, 10);
+ port = simple_strtoul(argv[2], NULL, 10);
+ reg = simple_strtoul(argv[3], NULL, 10);
+ value = simple_strtoul(argv[4], NULL, 16);
+
+ ret = sw_reg_write(name, phyaddr, port, reg, value);
+
+ return ret;
+}
+
+
+int do_mvsw_reg(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int ret;
+ const char *cmd, *ethname;
+
+ if (argc < 2)
+ return cmd_usage(cmdtp);
+
+ cmd = argv[1];
+ --argc;
+ ++argv;
+
+ if (strcmp(cmd, "read") == 0) {
+ if (argc < 5)
+ return cmd_usage(cmdtp);
+ ethname = argv[1];
+ --argc;
+ ++argv;
+ ret = do_mvsw_reg_read(ethname, argc, argv);
+ } else if (strcmp(cmd, "write") == 0) {
+ if (argc < 6)
+ return cmd_usage(cmdtp);
+ ethname = argv[1];
+ --argc;
+ ++argv;
+ ret = do_mvsw_reg_write(ethname, argc, argv);
+ } else
+ return cmd_usage(cmdtp);
+
+ return ret;
+}
+
+U_BOOT_CMD(
+ mvsw_reg, 7, 1, do_mvsw_reg,
+ "marvell 88e6352 switch register access",
+ "write ethname phyaddr port reg value\n"
+ "mvsw_reg read ethname phyaddr port reg\n"
+ );