ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/uboot/drivers/serial/usbtty.h b/marvell/uboot/drivers/serial/usbtty.h
new file mode 100644
index 0000000..819dec6
--- /dev/null
+++ b/marvell/uboot/drivers/serial/usbtty.h
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2003
+ * Gerry Hamel, geh@ti.com, Texas Instruments
+ *
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, bodonoghue@codehermit.ie, CodeHermit
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __USB_TTY_H__
+#define __USB_TTY_H__
+
+#include <usbdevice.h>
+#if defined(CONFIG_PPC)
+#include <usb/mpc8xx_udc.h>
+#elif defined(CONFIG_OMAP1510)
+#include <usb/omap1510_udc.h>
+#elif defined(CONFIG_CPU_PXA27X)
+#include <usb/pxa27x_udc.h>
+#elif defined(CONFIG_DW_UDC)
+#include <usb/designware_udc.h>
+#elif defined(CONFIG_MV_UDC)
+#include <usb/mv_udc.h>
+#endif
+
+#include <usb/udc.h>
+#include <version.h>
+
+/* If no VendorID/ProductID is defined in config.h, pretend to be Linux
+ * DO NOT Reuse this Vendor/Product setup with protocol incompatible devices */
+
+#ifndef CONFIG_USBD_VENDORID
+#define CONFIG_USBD_VENDORID 0x0525 /* Linux/NetChip */
+#endif
+#ifndef CONFIG_USBD_PRODUCTID_GSERIAL
+#define CONFIG_USBD_PRODUCTID_GSERIAL 0xa4a6 /* gserial */
+#endif
+#ifndef CONFIG_USBD_PRODUCTID_CDCACM
+#define CONFIG_USBD_PRODUCTID_CDCACM 0xa4a7 /* CDC ACM */
+#endif
+#ifndef CONFIG_USBD_MANUFACTURER
+#define CONFIG_USBD_MANUFACTURER "Das U-Boot"
+#endif
+#ifndef CONFIG_USBD_PRODUCT_NAME
+#define CONFIG_USBD_PRODUCT_NAME U_BOOT_VERSION
+#endif
+
+#ifndef CONFIG_USBD_CONFIGURATION_STR
+#define CONFIG_USBD_CONFIGURATION_STR "TTY via USB"
+#endif
+
+#define CONFIG_USBD_SERIAL_OUT_ENDPOINT UDC_OUT_ENDPOINT
+#define CONFIG_USBD_SERIAL_OUT_PKTSIZE UDC_OUT_PACKET_SIZE
+#define CONFIG_USBD_SERIAL_IN_ENDPOINT UDC_IN_ENDPOINT
+#define CONFIG_USBD_SERIAL_IN_PKTSIZE UDC_IN_PACKET_SIZE
+#define CONFIG_USBD_SERIAL_INT_ENDPOINT UDC_INT_ENDPOINT
+#define CONFIG_USBD_SERIAL_INT_PKTSIZE UDC_INT_PACKET_SIZE
+#define CONFIG_USBD_SERIAL_BULK_PKTSIZE UDC_BULK_PACKET_SIZE
+
+#if defined(CONFIG_USBD_HS)
+#define CONFIG_USBD_SERIAL_BULK_HS_PKTSIZE UDC_BULK_HS_PACKET_SIZE
+#endif
+
+#define USBTTY_DEVICE_CLASS COMMUNICATIONS_DEVICE_CLASS
+
+#define USBTTY_BCD_DEVICE 0x00
+#define USBTTY_MAXPOWER 0x00
+
+#define STR_LANG 0x00
+#define STR_MANUFACTURER 0x01
+#define STR_PRODUCT 0x02
+#define STR_SERIAL 0x03
+#define STR_CONFIG 0x04
+#define STR_DATA_INTERFACE 0x05
+#define STR_CTRL_INTERFACE 0x06
+#define STR_COUNT 0x07
+
+#endif