ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/uboot/drivers/usb/host/ehci-pci.c b/marvell/uboot/drivers/usb/host/ehci-pci.c
new file mode 100644
index 0000000..991b199
--- /dev/null
+++ b/marvell/uboot/drivers/usb/host/ehci-pci.c
@@ -0,0 +1,138 @@
+/*-
+ * Copyright (c) 2007-2008, Juniper Networks, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <pci.h>
+#include <usb.h>
+
+#include "ehci.h"
+
+#ifdef CONFIG_PCI_EHCI_DEVICE
+static struct pci_device_id ehci_pci_ids[] = {
+ /* Please add supported PCI EHCI controller ids here */
+ {0x1033, 0x00E0}, /* NEC */
+ {0x10B9, 0x5239}, /* ULI1575 PCI EHCI module ids */
+ {0x12D8, 0x400F}, /* Pericom */
+ {0, 0}
+};
+#else
+static pci_dev_t ehci_find_class(int index)
+{
+ int bus;
+ int devnum;
+ pci_dev_t bdf;
+ uint32_t class;
+
+ for (bus = 0; bus <= pci_last_busno(); bus++) {
+ for (devnum = 0; devnum < PCI_MAX_PCI_DEVICES-1; devnum++) {
+ pci_read_config_dword(PCI_BDF(bus, devnum, 0),
+ PCI_CLASS_REVISION, &class);
+ if (class >> 16 == 0xffff)
+ continue;
+
+ for (bdf = PCI_BDF(bus, devnum, 0);
+ bdf <= PCI_BDF(bus, devnum,
+ PCI_MAX_PCI_FUNCTIONS - 1);
+ bdf += PCI_BDF(0, 0, 1)) {
+ pci_read_config_dword(bdf, PCI_CLASS_REVISION,
+ &class);
+ class >>= 8;
+ /*
+ * Here be dragons! In case we have multiple
+ * PCI EHCI controllers, this function will
+ * be called multiple times as well. This
+ * function will scan the PCI busses, always
+ * starting from bus 0, device 0, function 0,
+ * until it finds an USB controller. The USB
+ * stack gives us an 'index' of a controller
+ * that is currently being registered, which
+ * is a number, starting from 0 and growing
+ * in ascending order as controllers are added.
+ * To avoid probing the same controller in tne
+ * subsequent runs of this function, we will
+ * skip 'index - 1' detected controllers and
+ * report the index'th controller.
+ */
+ if (class != PCI_CLASS_SERIAL_USB_EHCI)
+ continue;
+ if (index) {
+ index--;
+ continue;
+ }
+ /* Return index'th controller. */
+ return bdf;
+ }
+ }
+ }
+
+ return -ENODEV;
+}
+#endif
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(int index, enum usb_init_type init,
+ struct ehci_hccr **ret_hccr, struct ehci_hcor **ret_hcor)
+{
+ pci_dev_t pdev;
+ uint32_t cmd;
+ struct ehci_hccr *hccr;
+ struct ehci_hcor *hcor;
+
+#ifdef CONFIG_PCI_EHCI_DEVICE
+ pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVICE);
+#else
+ pdev = ehci_find_class(index);
+#endif
+ if (pdev < 0) {
+ printf("EHCI host controller not found\n");
+ return -1;
+ }
+
+ hccr = (struct ehci_hccr *)pci_map_bar(pdev,
+ PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
+ hcor = (struct ehci_hcor *)((uint32_t) hccr +
+ HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+ debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n",
+ (uint32_t)hccr, (uint32_t)hcor,
+ (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+ *ret_hccr = hccr;
+ *ret_hcor = hcor;
+
+ /* enable busmaster */
+ pci_read_config_dword(pdev, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MASTER;
+ pci_write_config_dword(pdev, PCI_COMMAND, cmd);
+ return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the the EHCI host controller.
+ */
+int ehci_hcd_stop(int index)
+{
+ return 0;
+}