ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/uboot/drivers/usb/musb/musb_hcd.c b/marvell/uboot/drivers/usb/musb/musb_hcd.c
new file mode 100644
index 0000000..799bd30
--- /dev/null
+++ b/marvell/uboot/drivers/usb/musb/musb_hcd.c
@@ -0,0 +1,1263 @@
+/*
+ * Mentor USB OTG Core host controller driver.
+ *
+ * Copyright (c) 2008 Texas Instruments
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Author: Thomas Abraham t-abraham@ti.com, Texas Instruments
+ */
+
+#include <common.h>
+#include <usb.h>
+#include "musb_hcd.h"
+
+/* MSC control transfers */
+#define USB_MSC_BBB_RESET 0xFF
+#define USB_MSC_BBB_GET_MAX_LUN 0xFE
+
+/* Endpoint configuration information */
+static const struct musb_epinfo epinfo[3] = {
+ {MUSB_BULK_EP, 1, 512}, /* EP1 - Bluk Out - 512 Bytes */
+ {MUSB_BULK_EP, 0, 512}, /* EP1 - Bluk In - 512 Bytes */
+ {MUSB_INTR_EP, 0, 64} /* EP2 - Interrupt IN - 64 Bytes */
+};
+
+/* --- Virtual Root Hub ---------------------------------------------------- */
+#ifdef MUSB_NO_MULTIPOINT
+static int rh_devnum;
+static u32 port_status;
+
+/* Device descriptor */
+static const u8 root_hub_dev_des[] = {
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x00, /* __u16 bcdUSB; v1.1 */
+ 0x02,
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x00, /* __u8 bDeviceProtocol; */
+ 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x00, /* __u16 idVendor; */
+ 0x00,
+ 0x00, /* __u16 idProduct; */
+ 0x00,
+ 0x00, /* __u16 bcdDevice; */
+ 0x00,
+ 0x00, /* __u8 iManufacturer; */
+ 0x01, /* __u8 iProduct; */
+ 0x00, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
+/* Configuration descriptor */
+static const u8 root_hub_config_des[] = {
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, /* __u16 wTotalLength; */
+ 0x00,
+ 0x01, /* __u8 bNumInterfaces; */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0x40, /* __u8 bmAttributes;
+ Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
+ 0x00, /* __u8 MaxPower; */
+
+ /* interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* endpoint */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x00, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+ 0x02,
+ 0xff /* __u8 ep_bInterval; 255 ms */
+};
+
+static const unsigned char root_hub_str_index0[] = {
+ 0x04, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 0x09, /* __u8 lang ID */
+ 0x04, /* __u8 lang ID */
+};
+
+static const unsigned char root_hub_str_index1[] = {
+ 0x1c, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 'M', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'U', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'S', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'B', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'R', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 't', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'u', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'b', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+};
+#endif
+
+/*
+ * This function writes the data toggle value.
+ */
+static void write_toggle(struct usb_device *dev, u8 ep, u8 dir_out)
+{
+ u16 toggle = usb_gettoggle(dev, ep, dir_out);
+ u16 csr;
+
+ if (dir_out) {
+ csr = readw(&musbr->txcsr);
+ if (!toggle) {
+ if (csr & MUSB_TXCSR_MODE)
+ csr = MUSB_TXCSR_CLRDATATOG;
+ else
+ csr = 0;
+ writew(csr, &musbr->txcsr);
+ } else {
+ csr |= MUSB_TXCSR_H_WR_DATATOGGLE;
+ writew(csr, &musbr->txcsr);
+ csr |= (toggle << MUSB_TXCSR_H_DATATOGGLE_SHIFT);
+ writew(csr, &musbr->txcsr);
+ }
+ } else {
+ if (!toggle) {
+ csr = readw(&musbr->txcsr);
+ if (csr & MUSB_TXCSR_MODE)
+ csr = MUSB_RXCSR_CLRDATATOG;
+ else
+ csr = 0;
+ writew(csr, &musbr->rxcsr);
+ } else {
+ csr = readw(&musbr->rxcsr);
+ csr |= MUSB_RXCSR_H_WR_DATATOGGLE;
+ writew(csr, &musbr->rxcsr);
+ csr |= (toggle << MUSB_S_RXCSR_H_DATATOGGLE);
+ writew(csr, &musbr->rxcsr);
+ }
+ }
+}
+
+/*
+ * This function checks if RxStall has occured on the endpoint. If a RxStall
+ * has occured, the RxStall is cleared and 1 is returned. If RxStall has
+ * not occured, 0 is returned.
+ */
+static u8 check_stall(u8 ep, u8 dir_out)
+{
+ u16 csr;
+
+ /* For endpoint 0 */
+ if (!ep) {
+ csr = readw(&musbr->txcsr);
+ if (csr & MUSB_CSR0_H_RXSTALL) {
+ csr &= ~MUSB_CSR0_H_RXSTALL;
+ writew(csr, &musbr->txcsr);
+ return 1;
+ }
+ } else { /* For non-ep0 */
+ if (dir_out) { /* is it tx ep */
+ csr = readw(&musbr->txcsr);
+ if (csr & MUSB_TXCSR_H_RXSTALL) {
+ csr &= ~MUSB_TXCSR_H_RXSTALL;
+ writew(csr, &musbr->txcsr);
+ return 1;
+ }
+ } else { /* is it rx ep */
+ csr = readw(&musbr->rxcsr);
+ if (csr & MUSB_RXCSR_H_RXSTALL) {
+ csr &= ~MUSB_RXCSR_H_RXSTALL;
+ writew(csr, &musbr->rxcsr);
+ return 1;
+ }
+ }
+ }
+ return 0;
+}
+
+/*
+ * waits until ep0 is ready. Returns 0 if ep is ready, -1 for timeout
+ * error and -2 for stall.
+ */
+static int wait_until_ep0_ready(struct usb_device *dev, u32 bit_mask)
+{
+ u16 csr;
+ int result = 1;
+ int timeout = CONFIG_MUSB_TIMEOUT;
+
+ while (result > 0) {
+ csr = readw(&musbr->txcsr);
+ if (csr & MUSB_CSR0_H_ERROR) {
+ csr &= ~MUSB_CSR0_H_ERROR;
+ writew(csr, &musbr->txcsr);
+ dev->status = USB_ST_CRC_ERR;
+ result = -1;
+ break;
+ }
+
+ switch (bit_mask) {
+ case MUSB_CSR0_TXPKTRDY:
+ if (!(csr & MUSB_CSR0_TXPKTRDY)) {
+ if (check_stall(MUSB_CONTROL_EP, 0)) {
+ dev->status = USB_ST_STALLED;
+ result = -2;
+ } else
+ result = 0;
+ }
+ break;
+
+ case MUSB_CSR0_RXPKTRDY:
+ if (check_stall(MUSB_CONTROL_EP, 0)) {
+ dev->status = USB_ST_STALLED;
+ result = -2;
+ } else
+ if (csr & MUSB_CSR0_RXPKTRDY)
+ result = 0;
+ break;
+
+ case MUSB_CSR0_H_REQPKT:
+ if (!(csr & MUSB_CSR0_H_REQPKT)) {
+ if (check_stall(MUSB_CONTROL_EP, 0)) {
+ dev->status = USB_ST_STALLED;
+ result = -2;
+ } else
+ result = 0;
+ }
+ break;
+ }
+
+ /* Check the timeout */
+ if (--timeout)
+ udelay(1);
+ else {
+ dev->status = USB_ST_CRC_ERR;
+ result = -1;
+ break;
+ }
+ }
+
+ return result;
+}
+
+/*
+ * waits until tx ep is ready. Returns 1 when ep is ready and 0 on error.
+ */
+static int wait_until_txep_ready(struct usb_device *dev, u8 ep)
+{
+ u16 csr;
+ int timeout = CONFIG_MUSB_TIMEOUT;
+
+ do {
+ if (check_stall(ep, 1)) {
+ dev->status = USB_ST_STALLED;
+ return 0;
+ }
+
+ csr = readw(&musbr->txcsr);
+ if (csr & MUSB_TXCSR_H_ERROR) {
+ dev->status = USB_ST_CRC_ERR;
+ return 0;
+ }
+
+ /* Check the timeout */
+ if (--timeout)
+ udelay(1);
+ else {
+ dev->status = USB_ST_CRC_ERR;
+ return -1;
+ }
+
+ } while (csr & MUSB_TXCSR_TXPKTRDY);
+ return 1;
+}
+
+/*
+ * waits until rx ep is ready. Returns 1 when ep is ready and 0 on error.
+ */
+static int wait_until_rxep_ready(struct usb_device *dev, u8 ep)
+{
+ u16 csr;
+ int timeout = CONFIG_MUSB_TIMEOUT;
+
+ do {
+ if (check_stall(ep, 0)) {
+ dev->status = USB_ST_STALLED;
+ return 0;
+ }
+
+ csr = readw(&musbr->rxcsr);
+ if (csr & MUSB_RXCSR_H_ERROR) {
+ dev->status = USB_ST_CRC_ERR;
+ return 0;
+ }
+
+ /* Check the timeout */
+ if (--timeout)
+ udelay(1);
+ else {
+ dev->status = USB_ST_CRC_ERR;
+ return -1;
+ }
+
+ } while (!(csr & MUSB_RXCSR_RXPKTRDY));
+ return 1;
+}
+
+/*
+ * This function performs the setup phase of the control transfer
+ */
+static int ctrlreq_setup_phase(struct usb_device *dev, struct devrequest *setup)
+{
+ int result;
+ u16 csr;
+
+ /* write the control request to ep0 fifo */
+ write_fifo(MUSB_CONTROL_EP, sizeof(struct devrequest), (void *)setup);
+
+ /* enable transfer of setup packet */
+ csr = readw(&musbr->txcsr);
+ csr |= (MUSB_CSR0_TXPKTRDY|MUSB_CSR0_H_SETUPPKT);
+ writew(csr, &musbr->txcsr);
+
+ /* wait until the setup packet is transmitted */
+ result = wait_until_ep0_ready(dev, MUSB_CSR0_TXPKTRDY);
+ dev->act_len = 0;
+ return result;
+}
+
+/*
+ * This function handles the control transfer in data phase
+ */
+static int ctrlreq_in_data_phase(struct usb_device *dev, u32 len, void *buffer)
+{
+ u16 csr;
+ u32 rxlen = 0;
+ u32 nextlen = 0;
+ u8 maxpktsize = (1 << dev->maxpacketsize) * 8;
+ u8 *rxbuff = (u8 *)buffer;
+ u8 rxedlength;
+ int result;
+
+ while (rxlen < len) {
+ /* Determine the next read length */
+ nextlen = ((len-rxlen) > maxpktsize) ? maxpktsize : (len-rxlen);
+
+ /* Set the ReqPkt bit */
+ csr = readw(&musbr->txcsr);
+ writew(csr | MUSB_CSR0_H_REQPKT, &musbr->txcsr);
+ result = wait_until_ep0_ready(dev, MUSB_CSR0_RXPKTRDY);
+ if (result < 0)
+ return result;
+
+ /* Actual number of bytes received by usb */
+ rxedlength = readb(&musbr->rxcount);
+
+ /* Read the data from the RxFIFO */
+ read_fifo(MUSB_CONTROL_EP, rxedlength, &rxbuff[rxlen]);
+
+ /* Clear the RxPktRdy Bit */
+ csr = readw(&musbr->txcsr);
+ csr &= ~MUSB_CSR0_RXPKTRDY;
+ writew(csr, &musbr->txcsr);
+
+ /* short packet? */
+ if (rxedlength != nextlen) {
+ dev->act_len += rxedlength;
+ break;
+ }
+ rxlen += nextlen;
+ dev->act_len = rxlen;
+ }
+ return 0;
+}
+
+/*
+ * This function handles the control transfer out data phase
+ */
+static int ctrlreq_out_data_phase(struct usb_device *dev, u32 len, void *buffer)
+{
+ u16 csr;
+ u32 txlen = 0;
+ u32 nextlen = 0;
+ u8 maxpktsize = (1 << dev->maxpacketsize) * 8;
+ u8 *txbuff = (u8 *)buffer;
+ int result = 0;
+
+ while (txlen < len) {
+ /* Determine the next write length */
+ nextlen = ((len-txlen) > maxpktsize) ? maxpktsize : (len-txlen);
+
+ /* Load the data to send in FIFO */
+ write_fifo(MUSB_CONTROL_EP, txlen, &txbuff[txlen]);
+
+ /* Set TXPKTRDY bit */
+ csr = readw(&musbr->txcsr);
+
+ csr |= MUSB_CSR0_TXPKTRDY;
+#if !defined(CONFIG_SOC_DM365)
+ csr |= MUSB_CSR0_H_DIS_PING;
+#endif
+ writew(csr, &musbr->txcsr);
+ result = wait_until_ep0_ready(dev, MUSB_CSR0_TXPKTRDY);
+ if (result < 0)
+ break;
+
+ txlen += nextlen;
+ dev->act_len = txlen;
+ }
+ return result;
+}
+
+/*
+ * This function handles the control transfer out status phase
+ */
+static int ctrlreq_out_status_phase(struct usb_device *dev)
+{
+ u16 csr;
+ int result;
+
+ /* Set the StatusPkt bit */
+ csr = readw(&musbr->txcsr);
+ csr |= (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_H_STATUSPKT);
+#if !defined(CONFIG_SOC_DM365)
+ csr |= MUSB_CSR0_H_DIS_PING;
+#endif
+ writew(csr, &musbr->txcsr);
+
+ /* Wait until TXPKTRDY bit is cleared */
+ result = wait_until_ep0_ready(dev, MUSB_CSR0_TXPKTRDY);
+ return result;
+}
+
+/*
+ * This function handles the control transfer in status phase
+ */
+static int ctrlreq_in_status_phase(struct usb_device *dev)
+{
+ u16 csr;
+ int result;
+
+ /* Set the StatusPkt bit and ReqPkt bit */
+ csr = MUSB_CSR0_H_REQPKT | MUSB_CSR0_H_STATUSPKT;
+#if !defined(CONFIG_SOC_DM365)
+ csr |= MUSB_CSR0_H_DIS_PING;
+#endif
+ writew(csr, &musbr->txcsr);
+ result = wait_until_ep0_ready(dev, MUSB_CSR0_H_REQPKT);
+
+ /* clear StatusPkt bit and RxPktRdy bit */
+ csr = readw(&musbr->txcsr);
+ csr &= ~(MUSB_CSR0_RXPKTRDY | MUSB_CSR0_H_STATUSPKT);
+ writew(csr, &musbr->txcsr);
+ return result;
+}
+
+/*
+ * determines the speed of the device (High/Full/Slow)
+ */
+static u8 get_dev_speed(struct usb_device *dev)
+{
+ return (dev->speed == USB_SPEED_HIGH) ? MUSB_TYPE_SPEED_HIGH :
+ ((dev->speed == USB_SPEED_LOW) ? MUSB_TYPE_SPEED_LOW :
+ MUSB_TYPE_SPEED_FULL);
+}
+
+/*
+ * configure the hub address and the port address.
+ */
+static void config_hub_port(struct usb_device *dev, u8 ep)
+{
+ u8 chid;
+ u8 hub;
+
+ /* Find out the nearest parent which is high speed */
+ while (dev->parent->parent != NULL)
+ if (get_dev_speed(dev->parent) != MUSB_TYPE_SPEED_HIGH)
+ dev = dev->parent;
+ else
+ break;
+
+ /* determine the port address at that hub */
+ hub = dev->parent->devnum;
+ for (chid = 0; chid < USB_MAXCHILDREN; chid++)
+ if (dev->parent->children[chid] == dev)
+ break;
+
+#ifndef MUSB_NO_MULTIPOINT
+ /* configure the hub address and the port address */
+ writeb(hub, &musbr->tar[ep].txhubaddr);
+ writeb((chid + 1), &musbr->tar[ep].txhubport);
+ writeb(hub, &musbr->tar[ep].rxhubaddr);
+ writeb((chid + 1), &musbr->tar[ep].rxhubport);
+#endif
+}
+
+#ifdef MUSB_NO_MULTIPOINT
+
+static void musb_port_reset(int do_reset)
+{
+ u8 power = readb(&musbr->power);
+
+ if (do_reset) {
+ power &= 0xf0;
+ writeb(power | MUSB_POWER_RESET, &musbr->power);
+ port_status |= USB_PORT_STAT_RESET;
+ port_status &= ~USB_PORT_STAT_ENABLE;
+ udelay(30000);
+ } else {
+ writeb(power & ~MUSB_POWER_RESET, &musbr->power);
+
+ power = readb(&musbr->power);
+ if (power & MUSB_POWER_HSMODE)
+ port_status |= USB_PORT_STAT_HIGH_SPEED;
+
+ port_status &= ~(USB_PORT_STAT_RESET | (USB_PORT_STAT_C_CONNECTION << 16));
+ port_status |= USB_PORT_STAT_ENABLE
+ | (USB_PORT_STAT_C_RESET << 16)
+ | (USB_PORT_STAT_C_ENABLE << 16);
+ }
+}
+
+/*
+ * root hub control
+ */
+static int musb_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len,
+ struct devrequest *cmd)
+{
+ int leni = transfer_len;
+ int len = 0;
+ int stat = 0;
+ u32 datab[4];
+ const u8 *data_buf = (u8 *) datab;
+ u16 bmRType_bReq;
+ u16 wValue;
+ u16 wIndex;
+ u16 wLength;
+ u16 int_usb;
+
+ if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+ debug("Root-Hub submit IRQ: NOT implemented\n");
+ return 0;
+ }
+
+ bmRType_bReq = cmd->requesttype | (cmd->request << 8);
+ wValue = swap_16(cmd->value);
+ wIndex = swap_16(cmd->index);
+ wLength = swap_16(cmd->length);
+
+ debug("--- HUB ----------------------------------------\n");
+ debug("submit rh urb, req=%x val=%#x index=%#x len=%d\n",
+ bmRType_bReq, wValue, wIndex, wLength);
+ debug("------------------------------------------------\n");
+
+ switch (bmRType_bReq) {
+ case RH_GET_STATUS:
+ debug("RH_GET_STATUS\n");
+
+ *(__u16 *) data_buf = swap_16(1);
+ len = 2;
+ break;
+
+ case RH_GET_STATUS | RH_INTERFACE:
+ debug("RH_GET_STATUS | RH_INTERFACE\n");
+
+ *(__u16 *) data_buf = swap_16(0);
+ len = 2;
+ break;
+
+ case RH_GET_STATUS | RH_ENDPOINT:
+ debug("RH_GET_STATUS | RH_ENDPOINT\n");
+
+ *(__u16 *) data_buf = swap_16(0);
+ len = 2;
+ break;
+
+ case RH_GET_STATUS | RH_CLASS:
+ debug("RH_GET_STATUS | RH_CLASS\n");
+
+ *(__u32 *) data_buf = swap_32(0);
+ len = 4;
+ break;
+
+ case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+ debug("RH_GET_STATUS | RH_OTHER | RH_CLASS\n");
+
+ int_usb = readw(&musbr->intrusb);
+ if (int_usb & MUSB_INTR_CONNECT) {
+ port_status |= USB_PORT_STAT_CONNECTION
+ | (USB_PORT_STAT_C_CONNECTION << 16);
+ port_status |= USB_PORT_STAT_HIGH_SPEED
+ | USB_PORT_STAT_ENABLE;
+ }
+
+ if (port_status & USB_PORT_STAT_RESET)
+ musb_port_reset(0);
+
+ *(__u32 *) data_buf = swap_32(port_status);
+ len = 4;
+ break;
+
+ case RH_CLEAR_FEATURE | RH_ENDPOINT:
+ debug("RH_CLEAR_FEATURE | RH_ENDPOINT\n");
+
+ switch (wValue) {
+ case RH_ENDPOINT_STALL:
+ debug("C_HUB_ENDPOINT_STALL\n");
+ len = 0;
+ break;
+ }
+ port_status &= ~(1 << wValue);
+ break;
+
+ case RH_CLEAR_FEATURE | RH_CLASS:
+ debug("RH_CLEAR_FEATURE | RH_CLASS\n");
+
+ switch (wValue) {
+ case RH_C_HUB_LOCAL_POWER:
+ debug("C_HUB_LOCAL_POWER\n");
+ len = 0;
+ break;
+
+ case RH_C_HUB_OVER_CURRENT:
+ debug("C_HUB_OVER_CURRENT\n");
+ len = 0;
+ break;
+ }
+ port_status &= ~(1 << wValue);
+ break;
+
+ case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+ debug("RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS\n");
+
+ switch (wValue) {
+ case RH_PORT_ENABLE:
+ len = 0;
+ break;
+
+ case RH_PORT_SUSPEND:
+ len = 0;
+ break;
+
+ case RH_PORT_POWER:
+ len = 0;
+ break;
+
+ case RH_C_PORT_CONNECTION:
+ len = 0;
+ break;
+
+ case RH_C_PORT_ENABLE:
+ len = 0;
+ break;
+
+ case RH_C_PORT_SUSPEND:
+ len = 0;
+ break;
+
+ case RH_C_PORT_OVER_CURRENT:
+ len = 0;
+ break;
+
+ case RH_C_PORT_RESET:
+ len = 0;
+ break;
+
+ default:
+ debug("invalid wValue\n");
+ stat = USB_ST_STALLED;
+ }
+
+ port_status &= ~(1 << wValue);
+ break;
+
+ case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+ debug("RH_SET_FEATURE | RH_OTHER | RH_CLASS\n");
+
+ switch (wValue) {
+ case RH_PORT_SUSPEND:
+ len = 0;
+ break;
+
+ case RH_PORT_RESET:
+ musb_port_reset(1);
+ len = 0;
+ break;
+
+ case RH_PORT_POWER:
+ len = 0;
+ break;
+
+ case RH_PORT_ENABLE:
+ len = 0;
+ break;
+
+ default:
+ debug("invalid wValue\n");
+ stat = USB_ST_STALLED;
+ }
+
+ port_status |= 1 << wValue;
+ break;
+
+ case RH_SET_ADDRESS:
+ debug("RH_SET_ADDRESS\n");
+
+ rh_devnum = wValue;
+ len = 0;
+ break;
+
+ case RH_GET_DESCRIPTOR:
+ debug("RH_GET_DESCRIPTOR: %x, %d\n", wValue, wLength);
+
+ switch (wValue) {
+ case (USB_DT_DEVICE << 8): /* device descriptor */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_dev_des),
+ wLength));
+ data_buf = root_hub_dev_des;
+ break;
+
+ case (USB_DT_CONFIG << 8): /* configuration descriptor */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_config_des),
+ wLength));
+ data_buf = root_hub_config_des;
+ break;
+
+ case ((USB_DT_STRING << 8) | 0x00): /* string 0 descriptors */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_str_index0),
+ wLength));
+ data_buf = root_hub_str_index0;
+ break;
+
+ case ((USB_DT_STRING << 8) | 0x01): /* string 1 descriptors */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_str_index1),
+ wLength));
+ data_buf = root_hub_str_index1;
+ break;
+
+ default:
+ debug("invalid wValue\n");
+ stat = USB_ST_STALLED;
+ }
+
+ break;
+
+ case RH_GET_DESCRIPTOR | RH_CLASS: {
+ u8 *_data_buf = (u8 *) datab;
+ debug("RH_GET_DESCRIPTOR | RH_CLASS\n");
+
+ _data_buf[0] = 0x09; /* min length; */
+ _data_buf[1] = 0x29;
+ _data_buf[2] = 0x1; /* 1 port */
+ _data_buf[3] = 0x01; /* per-port power switching */
+ _data_buf[3] |= 0x10; /* no overcurrent reporting */
+
+ /* Corresponds to data_buf[4-7] */
+ _data_buf[4] = 0;
+ _data_buf[5] = 5;
+ _data_buf[6] = 0;
+ _data_buf[7] = 0x02;
+ _data_buf[8] = 0xff;
+
+ len = min_t(unsigned int, leni,
+ min_t(unsigned int, data_buf[0], wLength));
+ break;
+ }
+
+ case RH_GET_CONFIGURATION:
+ debug("RH_GET_CONFIGURATION\n");
+
+ *(__u8 *) data_buf = 0x01;
+ len = 1;
+ break;
+
+ case RH_SET_CONFIGURATION:
+ debug("RH_SET_CONFIGURATION\n");
+
+ len = 0;
+ break;
+
+ default:
+ debug("*** *** *** unsupported root hub command *** *** ***\n");
+ stat = USB_ST_STALLED;
+ }
+
+ len = min_t(int, len, leni);
+ if (buffer != data_buf)
+ memcpy(buffer, data_buf, len);
+
+ dev->act_len = len;
+ dev->status = stat;
+ debug("dev act_len %d, status %lu\n", dev->act_len, dev->status);
+
+ return stat;
+}
+
+static void musb_rh_init(void)
+{
+ rh_devnum = 0;
+ port_status = 0;
+}
+
+#else
+
+static void musb_rh_init(void) {}
+
+#endif
+
+/*
+ * do a control transfer
+ */
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len, struct devrequest *setup)
+{
+ int devnum = usb_pipedevice(pipe);
+ u8 devspeed;
+
+#ifdef MUSB_NO_MULTIPOINT
+ /* Control message is for the HUB? */
+ if (devnum == rh_devnum) {
+ int stat = musb_submit_rh_msg(dev, pipe, buffer, len, setup);
+ if (stat)
+ return stat;
+ }
+#endif
+
+ /* select control endpoint */
+ writeb(MUSB_CONTROL_EP, &musbr->index);
+ readw(&musbr->txcsr);
+
+#ifndef MUSB_NO_MULTIPOINT
+ /* target addr and (for multipoint) hub addr/port */
+ writeb(devnum, &musbr->tar[MUSB_CONTROL_EP].txfuncaddr);
+ writeb(devnum, &musbr->tar[MUSB_CONTROL_EP].rxfuncaddr);
+#endif
+
+ /* configure the hub address and the port number as required */
+ devspeed = get_dev_speed(dev);
+ if ((musb_ishighspeed()) && (dev->parent != NULL) &&
+ (devspeed != MUSB_TYPE_SPEED_HIGH)) {
+ config_hub_port(dev, MUSB_CONTROL_EP);
+ writeb(devspeed << 6, &musbr->txtype);
+ } else {
+ writeb(musb_cfg.musb_speed << 6, &musbr->txtype);
+#ifndef MUSB_NO_MULTIPOINT
+ writeb(0, &musbr->tar[MUSB_CONTROL_EP].txhubaddr);
+ writeb(0, &musbr->tar[MUSB_CONTROL_EP].txhubport);
+ writeb(0, &musbr->tar[MUSB_CONTROL_EP].rxhubaddr);
+ writeb(0, &musbr->tar[MUSB_CONTROL_EP].rxhubport);
+#endif
+ }
+
+ /* Control transfer setup phase */
+ if (ctrlreq_setup_phase(dev, setup) < 0)
+ return 0;
+
+ switch (setup->request) {
+ case USB_REQ_GET_DESCRIPTOR:
+ case USB_REQ_GET_CONFIGURATION:
+ case USB_REQ_GET_INTERFACE:
+ case USB_REQ_GET_STATUS:
+ case USB_MSC_BBB_GET_MAX_LUN:
+ /* control transfer in-data-phase */
+ if (ctrlreq_in_data_phase(dev, len, buffer) < 0)
+ return 0;
+ /* control transfer out-status-phase */
+ if (ctrlreq_out_status_phase(dev) < 0)
+ return 0;
+ break;
+
+ case USB_REQ_SET_ADDRESS:
+ case USB_REQ_SET_CONFIGURATION:
+ case USB_REQ_SET_FEATURE:
+ case USB_REQ_SET_INTERFACE:
+ case USB_REQ_CLEAR_FEATURE:
+ case USB_MSC_BBB_RESET:
+ /* control transfer in status phase */
+ if (ctrlreq_in_status_phase(dev) < 0)
+ return 0;
+ break;
+
+ case USB_REQ_SET_DESCRIPTOR:
+ /* control transfer out data phase */
+ if (ctrlreq_out_data_phase(dev, len, buffer) < 0)
+ return 0;
+ /* control transfer in status phase */
+ if (ctrlreq_in_status_phase(dev) < 0)
+ return 0;
+ break;
+
+ default:
+ /* unhandled control transfer */
+ return -1;
+ }
+
+ dev->status = 0;
+ dev->act_len = len;
+
+#ifdef MUSB_NO_MULTIPOINT
+ /* Set device address to USB_FADDR register */
+ if (setup->request == USB_REQ_SET_ADDRESS)
+ writeb(dev->devnum, &musbr->faddr);
+#endif
+
+ return len;
+}
+
+/*
+ * do a bulk transfer
+ */
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int len)
+{
+ int dir_out = usb_pipeout(pipe);
+ int ep = usb_pipeendpoint(pipe);
+#ifndef MUSB_NO_MULTIPOINT
+ int devnum = usb_pipedevice(pipe);
+#endif
+ u8 type;
+ u16 csr;
+ u32 txlen = 0;
+ u32 nextlen = 0;
+ u8 devspeed;
+
+ /* select bulk endpoint */
+ writeb(MUSB_BULK_EP, &musbr->index);
+
+#ifndef MUSB_NO_MULTIPOINT
+ /* write the address of the device */
+ if (dir_out)
+ writeb(devnum, &musbr->tar[MUSB_BULK_EP].txfuncaddr);
+ else
+ writeb(devnum, &musbr->tar[MUSB_BULK_EP].rxfuncaddr);
+#endif
+
+ /* configure the hub address and the port number as required */
+ devspeed = get_dev_speed(dev);
+ if ((musb_ishighspeed()) && (dev->parent != NULL) &&
+ (devspeed != MUSB_TYPE_SPEED_HIGH)) {
+ /*
+ * MUSB is in high speed and the destination device is full
+ * speed device. So configure the hub address and port
+ * address registers.
+ */
+ config_hub_port(dev, MUSB_BULK_EP);
+ } else {
+#ifndef MUSB_NO_MULTIPOINT
+ if (dir_out) {
+ writeb(0, &musbr->tar[MUSB_BULK_EP].txhubaddr);
+ writeb(0, &musbr->tar[MUSB_BULK_EP].txhubport);
+ } else {
+ writeb(0, &musbr->tar[MUSB_BULK_EP].rxhubaddr);
+ writeb(0, &musbr->tar[MUSB_BULK_EP].rxhubport);
+ }
+#endif
+ devspeed = musb_cfg.musb_speed;
+ }
+
+ /* Write the saved toggle bit value */
+ write_toggle(dev, ep, dir_out);
+
+ if (dir_out) { /* bulk-out transfer */
+ /* Program the TxType register */
+ type = (devspeed << MUSB_TYPE_SPEED_SHIFT) |
+ (MUSB_TYPE_PROTO_BULK << MUSB_TYPE_PROTO_SHIFT) |
+ (ep & MUSB_TYPE_REMOTE_END);
+ writeb(type, &musbr->txtype);
+
+ /* Write maximum packet size to the TxMaxp register */
+ writew(dev->epmaxpacketout[ep], &musbr->txmaxp);
+ while (txlen < len) {
+ nextlen = ((len-txlen) < dev->epmaxpacketout[ep]) ?
+ (len-txlen) : dev->epmaxpacketout[ep];
+
+#ifdef CONFIG_USB_BLACKFIN
+ /* Set the transfer data size */
+ writew(nextlen, &musbr->txcount);
+#endif
+
+ /* Write the data to the FIFO */
+ write_fifo(MUSB_BULK_EP, nextlen,
+ (void *)(((u8 *)buffer) + txlen));
+
+ /* Set the TxPktRdy bit */
+ csr = readw(&musbr->txcsr);
+ writew(csr | MUSB_TXCSR_TXPKTRDY, &musbr->txcsr);
+
+ /* Wait until the TxPktRdy bit is cleared */
+ if (wait_until_txep_ready(dev, MUSB_BULK_EP) != 1) {
+ readw(&musbr->txcsr);
+ usb_settoggle(dev, ep, dir_out,
+ (csr >> MUSB_TXCSR_H_DATATOGGLE_SHIFT) & 1);
+ dev->act_len = txlen;
+ return 0;
+ }
+ txlen += nextlen;
+ }
+
+ /* Keep a copy of the data toggle bit */
+ csr = readw(&musbr->txcsr);
+ usb_settoggle(dev, ep, dir_out,
+ (csr >> MUSB_TXCSR_H_DATATOGGLE_SHIFT) & 1);
+ } else { /* bulk-in transfer */
+ /* Write the saved toggle bit value */
+ write_toggle(dev, ep, dir_out);
+
+ /* Program the RxType register */
+ type = (devspeed << MUSB_TYPE_SPEED_SHIFT) |
+ (MUSB_TYPE_PROTO_BULK << MUSB_TYPE_PROTO_SHIFT) |
+ (ep & MUSB_TYPE_REMOTE_END);
+ writeb(type, &musbr->rxtype);
+
+ /* Write the maximum packet size to the RxMaxp register */
+ writew(dev->epmaxpacketin[ep], &musbr->rxmaxp);
+ while (txlen < len) {
+ nextlen = ((len-txlen) < dev->epmaxpacketin[ep]) ?
+ (len-txlen) : dev->epmaxpacketin[ep];
+
+ /* Set the ReqPkt bit */
+ csr = readw(&musbr->rxcsr);
+ writew(csr | MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
+
+ /* Wait until the RxPktRdy bit is set */
+ if (wait_until_rxep_ready(dev, MUSB_BULK_EP) != 1) {
+ csr = readw(&musbr->rxcsr);
+ usb_settoggle(dev, ep, dir_out,
+ (csr >> MUSB_S_RXCSR_H_DATATOGGLE) & 1);
+ csr &= ~MUSB_RXCSR_RXPKTRDY;
+ writew(csr, &musbr->rxcsr);
+ dev->act_len = txlen;
+ return 0;
+ }
+
+ /* Read the data from the FIFO */
+ read_fifo(MUSB_BULK_EP, nextlen,
+ (void *)(((u8 *)buffer) + txlen));
+
+ /* Clear the RxPktRdy bit */
+ csr = readw(&musbr->rxcsr);
+ csr &= ~MUSB_RXCSR_RXPKTRDY;
+ writew(csr, &musbr->rxcsr);
+ txlen += nextlen;
+ }
+
+ /* Keep a copy of the data toggle bit */
+ csr = readw(&musbr->rxcsr);
+ usb_settoggle(dev, ep, dir_out,
+ (csr >> MUSB_S_RXCSR_H_DATATOGGLE) & 1);
+ }
+
+ /* bulk transfer is complete */
+ dev->status = 0;
+ dev->act_len = len;
+ return 0;
+}
+
+/*
+ * This function initializes the usb controller module.
+ */
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
+{
+ u8 power;
+ u32 timeout;
+
+ musb_rh_init();
+
+ if (musb_platform_init() == -1)
+ return -1;
+
+ /* Configure all the endpoint FIFO's and start usb controller */
+ musbr = musb_cfg.regs;
+ musb_configure_ep(&epinfo[0], ARRAY_SIZE(epinfo));
+ musb_start();
+
+ /*
+ * Wait until musb is enabled in host mode with a timeout. There
+ * should be a usb device connected.
+ */
+ timeout = musb_cfg.timeout;
+ while (--timeout)
+ if (readb(&musbr->devctl) & MUSB_DEVCTL_HM)
+ break;
+
+ /* if musb core is not in host mode, then return */
+ if (!timeout)
+ return -1;
+
+ /* start usb bus reset */
+ power = readb(&musbr->power);
+ writeb(power | MUSB_POWER_RESET, &musbr->power);
+
+ /* After initiating a usb reset, wait for about 20ms to 30ms */
+ udelay(30000);
+
+ /* stop usb bus reset */
+ power = readb(&musbr->power);
+ power &= ~MUSB_POWER_RESET;
+ writeb(power, &musbr->power);
+
+ /* Determine if the connected device is a high/full/low speed device */
+ musb_cfg.musb_speed = (readb(&musbr->power) & MUSB_POWER_HSMODE) ?
+ MUSB_TYPE_SPEED_HIGH :
+ ((readb(&musbr->devctl) & MUSB_DEVCTL_FSDEV) ?
+ MUSB_TYPE_SPEED_FULL : MUSB_TYPE_SPEED_LOW);
+ return 0;
+}
+
+/*
+ * This function stops the operation of the davinci usb module.
+ */
+int usb_lowlevel_stop(int index)
+{
+ /* Reset the USB module */
+ musb_platform_deinit();
+ writeb(0, &musbr->devctl);
+ return 0;
+}
+
+/*
+ * This function supports usb interrupt transfers. Currently, usb interrupt
+ * transfers are not supported.
+ */
+int submit_int_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int len, int interval)
+{
+ int dir_out = usb_pipeout(pipe);
+ int ep = usb_pipeendpoint(pipe);
+#ifndef MUSB_NO_MULTIPOINT
+ int devnum = usb_pipedevice(pipe);
+#endif
+ u8 type;
+ u16 csr;
+ u32 txlen = 0;
+ u32 nextlen = 0;
+ u8 devspeed;
+
+ /* select interrupt endpoint */
+ writeb(MUSB_INTR_EP, &musbr->index);
+
+#ifndef MUSB_NO_MULTIPOINT
+ /* write the address of the device */
+ if (dir_out)
+ writeb(devnum, &musbr->tar[MUSB_INTR_EP].txfuncaddr);
+ else
+ writeb(devnum, &musbr->tar[MUSB_INTR_EP].rxfuncaddr);
+#endif
+
+ /* configure the hub address and the port number as required */
+ devspeed = get_dev_speed(dev);
+ if ((musb_ishighspeed()) && (dev->parent != NULL) &&
+ (devspeed != MUSB_TYPE_SPEED_HIGH)) {
+ /*
+ * MUSB is in high speed and the destination device is full
+ * speed device. So configure the hub address and port
+ * address registers.
+ */
+ config_hub_port(dev, MUSB_INTR_EP);
+ } else {
+#ifndef MUSB_NO_MULTIPOINT
+ if (dir_out) {
+ writeb(0, &musbr->tar[MUSB_INTR_EP].txhubaddr);
+ writeb(0, &musbr->tar[MUSB_INTR_EP].txhubport);
+ } else {
+ writeb(0, &musbr->tar[MUSB_INTR_EP].rxhubaddr);
+ writeb(0, &musbr->tar[MUSB_INTR_EP].rxhubport);
+ }
+#endif
+ devspeed = musb_cfg.musb_speed;
+ }
+
+ /* Write the saved toggle bit value */
+ write_toggle(dev, ep, dir_out);
+
+ if (!dir_out) { /* intrrupt-in transfer */
+ /* Write the saved toggle bit value */
+ write_toggle(dev, ep, dir_out);
+ writeb(interval, &musbr->rxinterval);
+
+ /* Program the RxType register */
+ type = (devspeed << MUSB_TYPE_SPEED_SHIFT) |
+ (MUSB_TYPE_PROTO_INTR << MUSB_TYPE_PROTO_SHIFT) |
+ (ep & MUSB_TYPE_REMOTE_END);
+ writeb(type, &musbr->rxtype);
+
+ /* Write the maximum packet size to the RxMaxp register */
+ writew(dev->epmaxpacketin[ep], &musbr->rxmaxp);
+
+ while (txlen < len) {
+ nextlen = ((len-txlen) < dev->epmaxpacketin[ep]) ?
+ (len-txlen) : dev->epmaxpacketin[ep];
+
+ /* Set the ReqPkt bit */
+ csr = readw(&musbr->rxcsr);
+ writew(csr | MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
+
+ /* Wait until the RxPktRdy bit is set */
+ if (wait_until_rxep_ready(dev, MUSB_INTR_EP) != 1) {
+ csr = readw(&musbr->rxcsr);
+ usb_settoggle(dev, ep, dir_out,
+ (csr >> MUSB_S_RXCSR_H_DATATOGGLE) & 1);
+ csr &= ~MUSB_RXCSR_RXPKTRDY;
+ writew(csr, &musbr->rxcsr);
+ dev->act_len = txlen;
+ return 0;
+ }
+
+ /* Read the data from the FIFO */
+ read_fifo(MUSB_INTR_EP, nextlen,
+ (void *)(((u8 *)buffer) + txlen));
+
+ /* Clear the RxPktRdy bit */
+ csr = readw(&musbr->rxcsr);
+ csr &= ~MUSB_RXCSR_RXPKTRDY;
+ writew(csr, &musbr->rxcsr);
+ txlen += nextlen;
+ }
+
+ /* Keep a copy of the data toggle bit */
+ csr = readw(&musbr->rxcsr);
+ usb_settoggle(dev, ep, dir_out,
+ (csr >> MUSB_S_RXCSR_H_DATATOGGLE) & 1);
+ }
+
+ /* interrupt transfer is complete */
+ dev->irq_status = 0;
+ dev->irq_act_len = len;
+ dev->irq_handle(dev);
+ dev->status = 0;
+ dev->act_len = len;
+ return 0;
+}