ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/uboot/tools/scripts/README b/marvell/uboot/tools/scripts/README
new file mode 100644
index 0000000..dbc4425
--- /dev/null
+++ b/marvell/uboot/tools/scripts/README
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+This directory contains scripts that help to perform certain actions
+that need to be done frequently when working with U-Boot.
+
+They are meant as EXAMPLE code, so it is very likely that you will
+have to modify them before use.
+
+
+Short description:
+==================
+
+dot.kermrc:
+
+ Example for "~/.kermrc" Kermit init file for use with U-Boot
+
+ by Wolfgang Denk, 24 Jun 2001
+
+flash_param:
+
+ "kermit" script to automatically initialize the environment
+ variables on your target. This is most useful during
+ development when your environment variables are stored in an
+ embedded flash sector which is erased whenever you install a
+ new U-Boot image.
+
+ by Swen Anderson, 10 May 2001
+
+send_cmd:
+
+ send_cmd U_BOOT_COMMAND
+
+ "kermit" script to send a U-Boot command and print the
+ results. When used from a shell with history (like the bash)
+ this indirectly adds kind of history to U-Boot ;-)
+
+ by Swen Anderson, 10 May 2001
+
+send_image:
+
+ send_image FILE_NAME OFFSET
+
+ "kermit" script to automatically download a file to the
+ target using the "loadb" command (kermit binary protocol)
+
+ by Swen Anderson, 10 May 2001
diff --git a/marvell/uboot/tools/scripts/define2mk.sed b/marvell/uboot/tools/scripts/define2mk.sed
new file mode 100644
index 0000000..c641edf
--- /dev/null
+++ b/marvell/uboot/tools/scripts/define2mk.sed
@@ -0,0 +1,35 @@
+#
+# Sed script to parse CPP macros and generate output usable by make
+#
+# It is expected that this script is fed the output of 'gpp -dM'
+# which preprocesses the common.h header files and outputs the final
+# list of CPP macros (and whitespace is sanitized)
+#
+
+# Only process values prefixed with #define CONFIG_
+/^#define CONFIG_[A-Za-z0-9_][A-Za-z0-9_]*/ {
+ # Strip the #define prefix
+ s/#define *//;
+ # Change to form CONFIG_*=VALUE
+ s/ */=/;
+ # Drop trailing spaces
+ s/ *$//;
+ # drop quotes around string values
+ s/="\(.*\)"$/=\1/;
+ # Concatenate string values
+ s/" *"//g;
+ # Assume strings as default - add quotes around values
+ s/=\(..*\)/="\1"/;
+ # but remove again from decimal numbers
+ s/="\([0-9][0-9]*\)"/=\1/;
+ # ... and from hex numbers
+ s/="\(0[Xx][0-9a-fA-F][0-9a-fA-F]*\)"/=\1/;
+ # ... and from configs defined from other configs
+ s/="\(CONFIG_[A-Za-z0-9_][A-Za-z0-9_]*\)"/=$(\1)/;
+ # Change '1' and empty values to "y" (not perfect, but
+ # supports conditional compilation in the makefiles
+ s/=$/=y/;
+ s/=1$/=y/;
+ # print the line
+ p
+}
diff --git a/marvell/uboot/tools/scripts/dot.kermrc b/marvell/uboot/tools/scripts/dot.kermrc
new file mode 100644
index 0000000..0fc6c15
--- /dev/null
+++ b/marvell/uboot/tools/scripts/dot.kermrc
@@ -0,0 +1,16 @@
+set line /dev/ttyS0
+set speed 115200
+set carrier-watch off
+set handshake none
+set flow-control none
+robust
+set file type bin
+set file name lit
+set rec pack 1000
+set send pack 1000
+set window 5
+set prompt Kermit>
+define sz !sz \%1 \%2 \%3 \%4 \%5 \%6 \%7 \%8 \%9 < \v(line) > \v(line)
+define rz !rz \%1 \%2 \%3 \%4 \%5 \%6 \%7 \%8 \%9 < \v(line) > \v(line)
+define sx !sx \%1 \%2 \%3 \%4 \%5 \%6 \%7 \%8 \%9 < \v(line) > \v(line)
+define rx !rx \%1 \%2 \%3 \%4 \%5 \%6 \%7 \%8 \%9 < \v(line) > \v(line)
diff --git a/marvell/uboot/tools/scripts/flash_param b/marvell/uboot/tools/scripts/flash_param
new file mode 100644
index 0000000..847f99e
--- /dev/null
+++ b/marvell/uboot/tools/scripts/flash_param
@@ -0,0 +1,60 @@
+#!/usr/bin/kermit +
+# usage: ./flash_param parameters
+# Parameters: IP Address ETH Address ERIC Number
+# Format: xxx.xxx.xxx.xxx xx:xx:xx:xx:xx:xx xxxx
+
+set line /dev/ttyS0
+set speed 115200
+set serial 8N1
+set carrier-watch off
+set handshake none
+#set flow-control none
+set flow-control xon/xoff
+#robust
+set file type bin
+set file name lit
+set rec pack 1000
+set send pack 1000
+set window 5
+set prompt Kermit>
+#robust
+# Milliseconds to pause between each OUTPUT character
+set output pacing 1
+
+out \13
+in 10 =>
+#first erase the environment memory within NVRAM
+out mw f0000000 0 200\13
+in 10 =>
+out reset\13
+in 5 autoboot
+out \13\13
+in 10 =>
+#set additional env parameter
+out setenv ethaddr \%2\13
+in 10 =>
+out setenv serial# ERIC 1.0 \%3\13
+in 10 =>
+out setenv eric_id \%3\13
+in 10 =>
+#out setenv prec_videocard_bus unknown\13
+#in 10 =>
+#out setenv prec_bios_type unknown\13
+#in 10 =>
+out setenv eric_passwd .eRIC.\13
+in 10 =>
+#out setenv bootargs root=/dev/ram ramdisk_size=8192 init=/sbin/init ip=\%1:192.168.1.100:192.168.1.254:255.255.255.0\13
+#out setenv bootargs root=/dev/ram ramdisk_size=8192 init=/sbin/init ip=\%1:192.168.0.1\13
+#out setenv bootargs root=/dev/ram ramdisk_size=8192 init=/sbin/init ip=\%1\13
+out setenv bootargs console=/dev/ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.26:/eric_root_devel ip=\%1:192.168.1.26\13
+in 10 =>
+out setenv bootcmd bootm FFC00000\13
+in 10 =>
+out saveenv\13
+in 10 =>
+out reset\13
+in 5 autoboot
+out \13\13
+in 10 =>
+quit
+exit 0
diff --git a/marvell/uboot/tools/scripts/make-asm-offsets b/marvell/uboot/tools/scripts/make-asm-offsets
new file mode 100755
index 0000000..4c33756
--- /dev/null
+++ b/marvell/uboot/tools/scripts/make-asm-offsets
@@ -0,0 +1,27 @@
+#!/bin/sh
+
+# Adapted from Linux kernel's "Kbuild":
+# commit 1cdf25d704f7951d02a04064c97db547d6021872
+# Author: Christoph Lameter <clameter@sgi.com>
+
+mkdir -p $(dirname $2)
+
+# Default sed regexp - multiline due to syntax constraints
+SED_CMD="/^->/{s:->#\(.*\):/* \1 */:; \
+ s:^->\([^ ]*\) [\$#]*\([-0-9]*\) \(.*\):#define \1 (\2) /* \3 */:; \
+ s:^->\([^ ]*\) [\$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
+ s:->::; p;}"
+
+(set -e
+ echo "#ifndef __ASM_OFFSETS_H__"
+ echo "#define __ASM_OFFSETS_H__"
+ echo "/*"
+ echo " * DO NOT MODIFY."
+ echo " *"
+ echo " * This file was generated by $(basename $0)"
+ echo " *"
+ echo " */"
+ echo ""
+ sed -ne "${SED_CMD}" $1
+ echo ""
+ echo "#endif" ) > $2
diff --git a/marvell/uboot/tools/scripts/send_cmd b/marvell/uboot/tools/scripts/send_cmd
new file mode 100644
index 0000000..4131331
--- /dev/null
+++ b/marvell/uboot/tools/scripts/send_cmd
@@ -0,0 +1,21 @@
+#!/usr/bin/kermit +
+set line /dev/ttyS0
+set speed 115200
+set serial 8N1
+set carrier-watch off
+set handshake none
+set flow-control none
+robust
+set file type bin
+set file name lit
+set rec pack 1000
+set send pack 1000
+set window 5
+set prompt Kermit>
+
+#out \13
+#in 10 =>
+out \%1 \%2 \%3 \%4 \%5 \%6 \%7\13
+in 10 =>
+quit
+exit 0
diff --git a/marvell/uboot/tools/scripts/send_image b/marvell/uboot/tools/scripts/send_image
new file mode 100644
index 0000000..9b89d6b
--- /dev/null
+++ b/marvell/uboot/tools/scripts/send_image
@@ -0,0 +1,26 @@
+#!/usr/bin/kermit +
+# usage: send_image FILE_NAME OFFSET
+# e.g. send_image output.bin 1F00000
+set line /dev/ttyS0
+set speed 115200
+set serial 8N1
+set carrier-watch off
+set handshake none
+set flow-control none
+robust
+set file type bin
+set file name lit
+set rec pack 1000
+set send pack 1000
+set window 5
+set prompt Kermit>
+
+out \13
+in 10 =>
+out loadb \%2 \13
+in 10 download ...
+send \%1
+out \13
+in 10 ## Start Addr
+quit
+exit 0