ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/package/kernel/asr-wl/asr-hostapd/asr-hostapd-2023-06-22/tests/hwsim/start.sh b/package/kernel/asr-wl/asr-hostapd/asr-hostapd-2023-06-22/tests/hwsim/start.sh
new file mode 100644
index 0000000..ac43d10
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/asr-hostapd-2023-06-22/tests/hwsim/start.sh
@@ -0,0 +1,213 @@
+#!/bin/sh
+
+DIR="$( cd "$( dirname "$0" )" && pwd )"
+WPAS=$DIR/../../wpa_supplicant/wpa_supplicant
+WPACLI=$DIR/../../wpa_supplicant/wpa_cli
+HAPD=$DIR/../../hostapd/hostapd
+HAPD_AS=$DIR/../../hostapd/hostapd
+HAPDCLI=$DIR/../../hostapd/hostapd_cli
+WLANTEST=$DIR/../../wlantest/wlantest
+HLR_AUC_GW=$DIR/../../hostapd/hlr_auc_gw
+
+if [ -z "$LOGDIR" ] ; then
+ DATE="$(date +%s)"
+ LOGDIR="$DIR/logs/$DATE"
+ mkdir -p $LOGDIR
+else
+ if [ -e $LOGDIR/alt-wpa_supplicant/wpa_supplicant/wpa_supplicant ]; then
+ WPAS=$LOGDIR/alt-wpa_supplicant/wpa_supplicant/wpa_supplicant
+ WPACLI=$LOGDIR/alt-wpa_supplicant/wpa_supplicant/wpa_cli
+ # extra code coverage
+ $WPAS > /dev/null 2>&1
+ $WPAS -efoo -Ifoo -mfoo -ofoo -Ofoo -pfoo -Pfoo -h > /dev/null 2>&1
+ $WPAS -bfoo -B -Cfoo -q -W -N -L > /dev/null 2>&1
+ $WPAS -T -v > /dev/null 2>&1
+ $WPAS -u -z > /dev/null 2>&1
+ fi
+ if [ -e $LOGDIR/alt-hostapd/hostapd/hostapd ]; then
+ HAPD=$LOGDIR/alt-hostapd/hostapd/hostapd
+ HAPDCLI=$LOGDIR/alt-hostapd/hostapd/hostapd_cli
+ # extra code coverage
+ $HAPD > /dev/null 2>&1
+ $HAPD -v > /dev/null 2>&1
+ $HAPD -B -efoo -Pfoo -T -bfoo -h > /dev/null 2>&1
+ $HAPD -ufoo > /dev/null 2>&1
+ $HAPD -u00:11:22:33:44:55 > /dev/null 2>&1
+ $HAPD -gfoo > /dev/null 2>&1
+ $HAPD -Gfoo-not-exists > /dev/null 2>&1
+ $HAPD -z > /dev/null 2>&1
+ $HAPD -i foo1,foo2,foo3 > /dev/null 2>&1
+ fi
+ if [ -e $LOGDIR/alt-hostapd-as/hostapd/hostapd ]; then
+ HAPD_AS=$LOGDIR/alt-hostapd-as/hostapd/hostapd
+ fi
+ if [ -e $LOGDIR/alt-hlr_auc_gw/hostapd/hlr_auc_gw ]; then
+ HLR_AUC_GW=$LOGDIR/alt-hlr_auc_gw/hostapd/hlr_auc_gw
+ # extra code coverage
+ $HLR_AUC_GW > /dev/null 2>&1
+ $HLR_AUC_GW -Dfoo -i7 -sfoo -h > /dev/null 2>&1
+ $HLR_AUC_GW -i100 > /dev/null 2>&1
+ $HLR_AUC_GW -z > /dev/null 2>&1
+ fi
+fi
+
+LOGBASEDIR="$( cd "$(dirname "$LOGDIR")" && pwd )"
+if test "$LOGBASEDIR" = "$DIR/logs" -a -w "$LOGBASEDIR" ; then
+ rm -rf "$LOGBASEDIR/current"
+ ln -sf "$(basename "$LOGDIR")" "$LOGBASEDIR/current"
+fi
+
+if groups | tr ' ' "\n" | grep -q ^admin$; then
+ GROUP=admin
+elif groups | tr ' ' "\n" | grep -q ^wheel$; then
+ GROUP=wheel
+else
+ GROUP=adm
+fi
+
+for i in 0 1 2; do
+ sed "s/ GROUP=.*$/ GROUP=$GROUP/" "$DIR/p2p$i.conf" > "$LOGDIR/p2p$i.conf"
+done
+
+sed "s/group=admin/group=$GROUP/;s%LOGDIR%$LOGDIR%g" "$DIR/auth_serv/as.conf" > "$LOGDIR/as.conf"
+sed "s/group=admin/group=$GROUP/;s%LOGDIR%$LOGDIR%g" "$DIR/auth_serv/as2.conf" > "$LOGDIR/as2.conf"
+
+unset VM
+if [ "$1" = "VM" ]; then
+ VM="y"
+ shift
+fi
+
+if [ "$1" = "valgrind" ]; then
+ VALGRIND=y
+ VALGRIND_WPAS="valgrind --log-file=$LOGDIR/valgrind-wlan%d --leak-check=full"
+ VALGRIND_HAPD="valgrind --log-file=$LOGDIR/valgrind-hostapd --leak-check=full"
+ chmod -f a+rx $WPAS
+ chmod -f a+rx $HAPD
+ chmod -f a+rx $HAPD_AS
+ HAPD_AS="valgrind --log-file=$LOGDIR/valgrind-auth-serv --leak-check=full $HAPD_AS"
+ shift
+else
+ unset VALGRIND
+ VALGRIND_WPAS=
+ VALGRIND_HAPD=
+fi
+
+if [ "$1" = "trace" ]; then
+ TRACE="T"
+ shift
+else
+ TRACE=""
+fi
+
+$DIR/stop.sh
+
+TMP=$1
+if [ x${TMP%=[0-9]*} = "xchannels" ]; then
+ NUM_CH=${TMP#channels=}
+ shift
+else
+ NUM_CH=1
+fi
+
+test -d /sys/module/mac80211_hwsim || sudo modprobe mac80211_hwsim radios=7 channels=$NUM_CH support_p2p_device=0 dyndbg=+p
+
+sudo ifconfig hwsim0 up
+sudo $WLANTEST -i hwsim0 -n $LOGDIR/hwsim0.pcapng -c -dtN -L $LOGDIR/hwsim0 &
+for i in 0 1 2; do
+ DBUSARG=""
+ if [ $i = "0" ] && ([ -r /var/run/dbus/pid ] || [ -r /var/run/dbus/system_bus_socket ]); then
+ if $WPAS | grep -q -- -u; then
+ DBUSARG="-u"
+ fi
+ fi
+ sudo $(printf -- "$VALGRIND_WPAS" $i) $WPAS -g /tmp/wpas-wlan$i -G$GROUP -Dnl80211 -iwlan$i -c $LOGDIR/p2p$i.conf \
+ -ddKt$TRACE -f $LOGDIR/log$i $DBUSARG &
+done
+sudo $(printf -- "$VALGRIND_WPAS" 5) $WPAS -g /tmp/wpas-wlan5 -G$GROUP \
+ -ddKt$TRACE -f $LOGDIR/log5 &
+sudo $VALGRIND_HAPD $HAPD -ddKt$TRACE -g /var/run/hostapd-global -G $GROUP -f $LOGDIR/hostapd &
+HPID=$!
+
+if [ -z "$VM" ]; then
+ # Sleep a bit, otherwise pgrep may run before the child is forked
+ sleep 0.1
+ pgrep -P $HPID > $LOGDIR/hostapd-test.pid
+else
+ echo $HPID > $LOGDIR/hostapd-test.pid
+fi
+
+if [ -x $HLR_AUC_GW ]; then
+ cp $DIR/auth_serv/hlr_auc_gw.milenage_db $LOGDIR/hlr_auc_gw.milenage_db
+ sudo $HLR_AUC_GW -u -m $LOGDIR/hlr_auc_gw.milenage_db -g $DIR/auth_serv/hlr_auc_gw.gsm > $LOGDIR/hlr_auc_gw &
+fi
+
+openssl ocsp -index $DIR/auth_serv/index.txt \
+ -rsigner $DIR/auth_serv/ocsp-responder.pem \
+ -rkey $DIR/auth_serv/ocsp-responder.key \
+ -CA $DIR/auth_serv/ca.pem \
+ -issuer $DIR/auth_serv/ca.pem \
+ -verify_other $DIR/auth_serv/ca.pem -trust_other \
+ -ndays 7 \
+ -reqin $DIR/auth_serv/ocsp-req.der \
+ -respout $LOGDIR/ocsp-server-cache.der > $LOGDIR/ocsp.log 2>&1
+if [ ! -r $LOGDIR/ocsp-server-cache.der ]; then
+ cp $DIR/auth_serv/ocsp-server-cache.der $LOGDIR/ocsp-server-cache.der
+fi
+
+touch $LOGDIR/hostapd.db
+sudo $HAPD_AS -ddKt $LOGDIR/as.conf $LOGDIR/as2.conf > $LOGDIR/auth_serv &
+
+# wait for programs to be fully initialized
+for i in 0 1 2 3 4 5 6 7 8 9; do
+ if [ -e /tmp/wpas-wlan0 ]; then
+ break
+ fi
+ sleep 0.05
+done
+for i in 0 1 2; do
+ for j in `seq 1 10`; do
+ if $WPACLI -g /tmp/wpas-wlan$i ping | grep -q PONG; then
+ break
+ fi
+ if [ $j = "10" ]; then
+ echo "Could not connect to /tmp/wpas-wlan$i"
+ exit 1
+ fi
+ sleep 1
+ done
+done
+
+for j in `seq 1 10`; do
+ if $WPACLI -g /var/run/hostapd-global ping | grep -q PONG; then
+ break
+ fi
+ if [ $j = "10" ]; then
+ echo "Could not connect to /var/run/hostapd-global"
+ exit 1
+ fi
+ sleep 1
+done
+
+for j in `seq 1 10`; do
+ if $HAPDCLI -i as ping | grep -q PONG; then
+ break
+ fi
+ if [ $j = "10" ]; then
+ echo "Could not connect to hostapd-as-RADIUS-server"
+ exit 1
+ fi
+ sleep 1
+done
+
+if [ $USER = "0" -o $USER = "root" ]; then
+ exit 0
+fi
+
+sleep 0.75
+sudo chown -f $USER $LOGDIR/hwsim0.pcapng $LOGDIR/hwsim0 $LOGDIR/log* $LOGDIR/hostapd
+if [ "x$VALGRIND" = "xy" ]; then
+ sudo chown -f $USER $LOGDIR/*valgrind*
+fi
+
+exit 0