diff --git a/package/kernel/asr-wl/asr-hostapd/files/dhcp-get-server.sh b/package/kernel/asr-wl/asr-hostapd/files/dhcp-get-server.sh
new file mode 100644
index 0000000..a1509ac
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/files/dhcp-get-server.sh
@@ -0,0 +1,2 @@
+#!/bin/sh
+[ "$1" = bound ] && echo "$serverid"
diff --git a/package/kernel/asr-wl/asr-hostapd/files/hostapd-basic.config b/package/kernel/asr-wl/asr-hostapd/files/hostapd-basic.config
new file mode 100644
index 0000000..3d19d8f
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/files/hostapd-basic.config
@@ -0,0 +1,404 @@
+# Example hostapd build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+# Driver interface for Host AP driver
+#CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for wired authenticator
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for no driver (e.g., RADIUS server only)
+#CONFIG_DRIVER_NONE=y
+
+# IEEE 802.11F/IAPP
+#CONFIG_IAPP=y
+
+# WPA2/IEEE 802.11i RSN pre-authentication
+CONFIG_RSN_PREAUTH=y
+
+# IEEE 802.11w (management frame protection)
+#CONFIG_IEEE80211W=y
+
+# Support Operating Channel Validation
+CONFIG_OCV=y
+
+# Integrated EAP server
+#CONFIG_EAP=y
+
+# EAP Re-authentication Protocol (ERP) in integrated EAP server
+#CONFIG_ERP=y
+
+# EAP-MD5 for the integrated EAP server
+#CONFIG_EAP_MD5=y
+
+# EAP-TLS for the integrated EAP server
+#CONFIG_EAP_TLS=y
+
+# EAP-MSCHAPv2 for the integrated EAP server
+#CONFIG_EAP_MSCHAPV2=y
+
+# EAP-PEAP for the integrated EAP server
+#CONFIG_EAP_PEAP=y
+
+# EAP-GTC for the integrated EAP server
+#CONFIG_EAP_GTC=y
+
+# EAP-TTLS for the integrated EAP server
+#CONFIG_EAP_TTLS=y
+
+# EAP-SIM for the integrated EAP server
+#CONFIG_EAP_SIM=y
+
+# EAP-AKA for the integrated EAP server
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' for the integrated EAP server
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# EAP-PAX for the integrated EAP server
+#CONFIG_EAP_PAX=y
+
+# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd for the integrated EAP server (secure authentication with a password)
+#CONFIG_EAP_PWD=y
+
+# EAP-SAKE for the integrated EAP server
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK for the integrated EAP server
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-FAST for the integrated EAP server
+#CONFIG_EAP_FAST=y
+
+# EAP-TEAP for the integrated EAP server
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable UPnP support for external WPS Registrars
+#CONFIG_WPS_UPNP=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# Trusted Network Connect (EAP-TNC)
+#CONFIG_EAP_TNC=y
+
+# EAP-EKE for the integrated EAP server
+#CONFIG_EAP_EKE=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+#CONFIG_PKCS12=y
+
+# RADIUS authentication server. This provides access to the integrated EAP
+# server from external hosts using RADIUS.
+#CONFIG_RADIUS_SERVER=y
+
+# Build IPv6 support for RADIUS operations
+#CONFIG_IPV6=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+CONFIG_IEEE80211R=y
+
+# Use the hostapd's IEEE 802.11 authentication (ACL), but without
+# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
+#CONFIG_DRIVER_RADIUS_ACL=y
+
+# IEEE 802.11n (High Throughput) support
+CONFIG_IEEE80211N=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# IEEE 802.11ac (Very High Throughput) support
+CONFIG_IEEE80211AC=y
+
+# IEEE 802.11ax HE support
+# Note: This is experimental and work in progress. The definitions are still
+# subject to change and this should not be expected to interoperate with the
+# final IEEE 802.11ax version.
+#CONFIG_IEEE80211AX=y
+
+# Remove debugging code that is printing out debug messages to stdout.
+# This can be used to reduce the size of the hostapd considerably if debugging
+# code is not needed.
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Add support for writing debug log to a file: -f /tmp/hostapd.log
+# Disabled by default.
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+CONFIG_DEBUG_SYSLOG=y
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Remove support for RADIUS accounting
+CONFIG_NO_ACCOUNTING=y
+
+# Remove support for RADIUS
+CONFIG_NO_RADIUS=y
+
+# Remove support for VLANs
+#CONFIG_NO_VLAN=y
+
+# Enable support for fully dynamic VLANs. This enables hostapd to
+# automatically create bridge and VLAN interfaces if necessary.
+#CONFIG_FULL_DYNAMIC_VLAN=y
+
+# Use netlink-based kernel API for VLAN operations instead of ioctl()
+# Note: This requires libnl 3.1 or newer.
+#CONFIG_VLAN_NETLINK=y
+
+# Remove support for dumping internal state through control interface commands
+# This can be used to reduce binary size at the cost of disabling a debugging
+# option.
+CONFIG_NO_DUMP_STATE=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# hostapd depends on strong random number generation being available from the
+# operating system. os_get_random() function is used to fetch random data when
+# needed, e.g., for key generation. On Linux and BSD systems, this works by
+# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
+# properly initialized before hostapd is started. This is important especially
+# on embedded devices that do not have a hardware random number generator and
+# may by default start up with minimal entropy available for random number
+# generation.
+#
+# As a safety net, hostapd is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data
+# fetched from the OS. This by itself is not considered to be very strong, but
+# it may help in cases where the system pool is not initialized properly.
+# However, it is very strongly recommended that the system pool is initialized
+# with enough entropy either by using hardware assisted random number
+# generator or by storing state over device reboots.
+#
+# hostapd can be configured to maintain its own entropy store over restarts to
+# enhance random number generation. This is not perfect, but it is much more
+# secure than using the same sequence of random numbers after every reboot.
+# This can be enabled with -e<entropy file> command line option. The specified
+# file needs to be readable and writable by hostapd.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal hostapd random pool can be disabled.
+# This will save some in binary size and CPU use. However, this should only be
+# considered for builds that are known to be used on devices that meet the
+# requirements described above.
+CONFIG_NO_RANDOM_POOL=y
+
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+CONFIG_GETRANDOM=y
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used.
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms.
+#CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks.
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
+#CONFIG_SQLITE=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# Testing options
+# This can be used to enable some testing options (see also the example
+# configuration file) that are really useful only for testing clients that
+# connect to this hostapd. These options allow, for example, to drop a
+# certain percentage of probe requests or auth/(re)assoc frames.
+#
+#CONFIG_TESTING_OPTIONS=y
+
+# Automatic Channel Selection
+# This will allow hostapd to pick the channel automatically when channel is set
+# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# You can customize the ACS survey algorithm with the hostapd.conf variable
+# acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#
+#CONFIG_ACS=y
+
+# Multiband Operation support
+# These extentions facilitate efficient use of multiple frequency bands
+# available to the AP and the devices that may associate with it.
+#CONFIG_MBO=y
+
+# Client Taxonomy
+# Has the AP retain the Probe Request and (Re)Association Request frames from
+# a client, from which a signature can be produced which can identify the model
+# of client device like "Nexus 6P" or "iPhone 5s".
+#CONFIG_TAXONOMY=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+#CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Include internal line edit mode in hostapd_cli. This can be used to provide
+# limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Airtime policy support
+CONFIG_AIRTIME_POLICY=y
+
+# Proxy ARP support
+#CONFIG_PROXYARP=y
+
+# Override default value for the wpa_disable_eapol_key_retries configuration
+# parameter. See that parameter in hostapd.conf for more details.
+#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
+
+# uBus IPC/RPC System
+# Services can connect to the bus and provide methods
+# that can be called by other services or clients.
+CONFIG_UBUS=y
+
+# OpenWrt patch 380-disable-ctrl-iface-mib.patch
+# leads to the MIB only being compiled in if
+# CONFIG_CTRL_IFACE_MIB is enabled.
+#CONFIG_CTRL_IFACE_MIB=y
diff --git a/package/kernel/asr-wl/asr-hostapd/files/hostapd-full.config b/package/kernel/asr-wl/asr-hostapd/files/hostapd-full.config
new file mode 100644
index 0000000..8d94ea7
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/files/hostapd-full.config
@@ -0,0 +1,419 @@
+# Example hostapd build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+# Driver interface for Host AP driver
+#CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for wired authenticator
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for no driver (e.g., RADIUS server only)
+#CONFIG_DRIVER_NONE=y
+
+# IEEE 802.11F/IAPP
+CONFIG_IAPP=y
+
+# WPA2/IEEE 802.11i RSN pre-authentication
+CONFIG_RSN_PREAUTH=y
+
+# IEEE 802.11w (management frame protection)
+#CONFIG_IEEE80211W=y
+
+# Support Operating Channel Validation
+CONFIG_OCV=y
+
+# Integrated EAP server
+CONFIG_EAP=y
+
+# EAP Re-authentication Protocol (ERP) in integrated EAP server
+CONFIG_ERP=y
+
+# EAP-MD5 for the integrated EAP server
+CONFIG_EAP_MD5=y
+
+# EAP-TLS for the integrated EAP server
+CONFIG_EAP_TLS=y
+
+# EAP-MSCHAPv2 for the integrated EAP server
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-PEAP for the integrated EAP server
+CONFIG_EAP_PEAP=y
+
+# EAP-GTC for the integrated EAP server
+CONFIG_EAP_GTC=y
+
+# EAP-TTLS for the integrated EAP server
+CONFIG_EAP_TTLS=y
+
+# EAP-SIM for the integrated EAP server
+#CONFIG_EAP_SIM=y
+
+# EAP-AKA for the integrated EAP server
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' for the integrated EAP server
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# EAP-PAX for the integrated EAP server
+#CONFIG_EAP_PAX=y
+
+# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd for the integrated EAP server (secure authentication with a password)
+#CONFIG_EAP_PWD=y
+
+# EAP-SAKE for the integrated EAP server
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK for the integrated EAP server
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-FAST for the integrated EAP server
+CONFIG_EAP_FAST=y
+
+# EAP-TEAP for the integrated EAP server
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
+# Wi-Fi Protected Setup (WPS)
+CONFIG_WPS=y
+# Enable UPnP support for external WPS Registrars
+#CONFIG_WPS_UPNP=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# Trusted Network Connect (EAP-TNC)
+#CONFIG_EAP_TNC=y
+
+# EAP-EKE for the integrated EAP server
+#CONFIG_EAP_EKE=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# RADIUS authentication server. This provides access to the integrated EAP
+# server from external hosts using RADIUS.
+CONFIG_RADIUS_SERVER=y
+
+# Build IPv6 support for RADIUS operations
+CONFIG_IPV6=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+CONFIG_IEEE80211R=y
+
+# Use the hostapd's IEEE 802.11 authentication (ACL), but without
+# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
+#CONFIG_DRIVER_RADIUS_ACL=y
+
+# IEEE 802.11n (High Throughput) support
+CONFIG_IEEE80211N=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+CONFIG_WNM=y
+
+# IEEE 802.11ac (Very High Throughput) support
+CONFIG_IEEE80211AC=y
+
+# IEEE 802.11ax HE support
+# Note: This is experimental and work in progress. The definitions are still
+# subject to change and this should not be expected to interoperate with the
+# final IEEE 802.11ax version.
+#CONFIG_IEEE80211AX=y
+
+# Remove debugging code that is printing out debug messages to stdout.
+# This can be used to reduce the size of the hostapd considerably if debugging
+# code is not needed.
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Add support for writing debug log to a file: -f /tmp/hostapd.log
+# Disabled by default.
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+CONFIG_DEBUG_SYSLOG=y
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Remove support for RADIUS accounting
+#CONFIG_NO_ACCOUNTING=y
+
+# Remove support for RADIUS
+#CONFIG_NO_RADIUS=y
+
+# Remove support for VLANs
+#CONFIG_NO_VLAN=y
+
+# Enable support for fully dynamic VLANs. This enables hostapd to
+# automatically create bridge and VLAN interfaces if necessary.
+CONFIG_FULL_DYNAMIC_VLAN=y
+
+# Use netlink-based kernel API for VLAN operations instead of ioctl()
+# Note: This requires libnl 3.1 or newer.
+#CONFIG_VLAN_NETLINK=y
+
+# Remove support for dumping internal state through control interface commands
+# This can be used to reduce binary size at the cost of disabling a debugging
+# option.
+CONFIG_NO_DUMP_STATE=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# hostapd depends on strong random number generation being available from the
+# operating system. os_get_random() function is used to fetch random data when
+# needed, e.g., for key generation. On Linux and BSD systems, this works by
+# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
+# properly initialized before hostapd is started. This is important especially
+# on embedded devices that do not have a hardware random number generator and
+# may by default start up with minimal entropy available for random number
+# generation.
+#
+# As a safety net, hostapd is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data
+# fetched from the OS. This by itself is not considered to be very strong, but
+# it may help in cases where the system pool is not initialized properly.
+# However, it is very strongly recommended that the system pool is initialized
+# with enough entropy either by using hardware assisted random number
+# generator or by storing state over device reboots.
+#
+# hostapd can be configured to maintain its own entropy store over restarts to
+# enhance random number generation. This is not perfect, but it is much more
+# secure than using the same sequence of random numbers after every reboot.
+# This can be enabled with -e<entropy file> command line option. The specified
+# file needs to be readable and writable by hostapd.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal hostapd random pool can be disabled.
+# This will save some in binary size and CPU use. However, this should only be
+# considered for builds that are known to be used on devices that meet the
+# requirements described above.
+CONFIG_NO_RANDOM_POOL=y
+
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+CONFIG_GETRANDOM=y
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used.
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms.
+#CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks.
+CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+CONFIG_HS20=y
+
+# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
+#CONFIG_SQLITE=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# Testing options
+# This can be used to enable some testing options (see also the example
+# configuration file) that are really useful only for testing clients that
+# connect to this hostapd. These options allow, for example, to drop a
+# certain percentage of probe requests or auth/(re)assoc frames.
+#
+#CONFIG_TESTING_OPTIONS=y
+
+# Automatic Channel Selection
+# This will allow hostapd to pick the channel automatically when channel is set
+# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# You can customize the ACS survey algorithm with the hostapd.conf variable
+# acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#
+#CONFIG_ACS=y
+
+# Multiband Operation support
+# These extentions facilitate efficient use of multiple frequency bands
+# available to the AP and the devices that may associate with it.
+#CONFIG_MBO=y
+
+# Client Taxonomy
+# Has the AP retain the Probe Request and (Re)Association Request frames from
+# a client, from which a signature can be produced which can identify the model
+# of client device like "Nexus 6P" or "iPhone 5s".
+CONFIG_TAXONOMY=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+#CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Include internal line edit mode in hostapd_cli. This can be used to provide
+# limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Airtime policy support
+CONFIG_AIRTIME_POLICY=y
+
+# Proxy ARP support
+CONFIG_PROXYARP=y
+
+# Override default value for the wpa_disable_eapol_key_retries configuration
+# parameter. See that parameter in hostapd.conf for more details.
+#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
+
+# uBus IPC/RPC System
+# Services can connect to the bus and provide methods
+# that can be called by other services or clients.
+CONFIG_UBUS=y
+
+# OpenWrt patch 380-disable-ctrl-iface-mib.patch
+# leads to the MIB only being compiled in if
+# CONFIG_CTRL_IFACE_MIB is enabled.
+CONFIG_CTRL_IFACE_MIB=y
+
+# DFS CAC Timer config
+CONFIG_DFS_CAC_TIMER=y
+
+# 2.4G band 20M/40M bandwidth switch
+CONFIG_24G_BW_SWITCH=y
+
+# 5G band 20M/40M/80M bandwidth switch
+CONFIG_5G_BW_SWITCH=y
+
+# BSS Transition implementation
+#CONFIG_BSS_TRANS_IMPL=y
+
+# WPS 5G priority access when push button
+#CONFIG_WPS_5G_PREFER=y
\ No newline at end of file
diff --git a/package/kernel/asr-wl/asr-hostapd/files/hostapd-mini.config b/package/kernel/asr-wl/asr-hostapd/files/hostapd-mini.config
new file mode 100644
index 0000000..f2ed071
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/files/hostapd-mini.config
@@ -0,0 +1,404 @@
+# Example hostapd build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+# Driver interface for Host AP driver
+#CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for wired authenticator
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for no driver (e.g., RADIUS server only)
+#CONFIG_DRIVER_NONE=y
+
+# IEEE 802.11F/IAPP
+#CONFIG_IAPP=y
+
+# WPA2/IEEE 802.11i RSN pre-authentication
+CONFIG_RSN_PREAUTH=y
+
+# IEEE 802.11w (management frame protection)
+#CONFIG_IEEE80211W=y
+
+# Support Operating Channel Validation
+#CONFIG_OCV=y
+
+# Integrated EAP server
+#CONFIG_EAP=y
+
+# EAP Re-authentication Protocol (ERP) in integrated EAP server
+#CONFIG_ERP=y
+
+# EAP-MD5 for the integrated EAP server
+#CONFIG_EAP_MD5=y
+
+# EAP-TLS for the integrated EAP server
+#CONFIG_EAP_TLS=y
+
+# EAP-MSCHAPv2 for the integrated EAP server
+#CONFIG_EAP_MSCHAPV2=y
+
+# EAP-PEAP for the integrated EAP server
+#CONFIG_EAP_PEAP=y
+
+# EAP-GTC for the integrated EAP server
+#CONFIG_EAP_GTC=y
+
+# EAP-TTLS for the integrated EAP server
+#CONFIG_EAP_TTLS=y
+
+# EAP-SIM for the integrated EAP server
+#CONFIG_EAP_SIM=y
+
+# EAP-AKA for the integrated EAP server
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' for the integrated EAP server
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# EAP-PAX for the integrated EAP server
+#CONFIG_EAP_PAX=y
+
+# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd for the integrated EAP server (secure authentication with a password)
+#CONFIG_EAP_PWD=y
+
+# EAP-SAKE for the integrated EAP server
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK for the integrated EAP server
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-FAST for the integrated EAP server
+#CONFIG_EAP_FAST=y
+
+# EAP-TEAP for the integrated EAP server
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable UPnP support for external WPS Registrars
+#CONFIG_WPS_UPNP=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# Trusted Network Connect (EAP-TNC)
+#CONFIG_EAP_TNC=y
+
+# EAP-EKE for the integrated EAP server
+#CONFIG_EAP_EKE=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+#CONFIG_PKCS12=y
+
+# RADIUS authentication server. This provides access to the integrated EAP
+# server from external hosts using RADIUS.
+#CONFIG_RADIUS_SERVER=y
+
+# Build IPv6 support for RADIUS operations
+#CONFIG_IPV6=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Use the hostapd's IEEE 802.11 authentication (ACL), but without
+# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
+#CONFIG_DRIVER_RADIUS_ACL=y
+
+# IEEE 802.11n (High Throughput) support
+CONFIG_IEEE80211N=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# IEEE 802.11ac (Very High Throughput) support
+CONFIG_IEEE80211AC=y
+
+# IEEE 802.11ax HE support
+# Note: This is experimental and work in progress. The definitions are still
+# subject to change and this should not be expected to interoperate with the
+# final IEEE 802.11ax version.
+#CONFIG_IEEE80211AX=y
+
+# Remove debugging code that is printing out debug messages to stdout.
+# This can be used to reduce the size of the hostapd considerably if debugging
+# code is not needed.
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Add support for writing debug log to a file: -f /tmp/hostapd.log
+# Disabled by default.
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+CONFIG_DEBUG_SYSLOG=y
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Remove support for RADIUS accounting
+CONFIG_NO_ACCOUNTING=y
+
+# Remove support for RADIUS
+CONFIG_NO_RADIUS=y
+
+# Remove support for VLANs
+#CONFIG_NO_VLAN=y
+
+# Enable support for fully dynamic VLANs. This enables hostapd to
+# automatically create bridge and VLAN interfaces if necessary.
+#CONFIG_FULL_DYNAMIC_VLAN=y
+
+# Use netlink-based kernel API for VLAN operations instead of ioctl()
+# Note: This requires libnl 3.1 or newer.
+#CONFIG_VLAN_NETLINK=y
+
+# Remove support for dumping internal state through control interface commands
+# This can be used to reduce binary size at the cost of disabling a debugging
+# option.
+CONFIG_NO_DUMP_STATE=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# hostapd depends on strong random number generation being available from the
+# operating system. os_get_random() function is used to fetch random data when
+# needed, e.g., for key generation. On Linux and BSD systems, this works by
+# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
+# properly initialized before hostapd is started. This is important especially
+# on embedded devices that do not have a hardware random number generator and
+# may by default start up with minimal entropy available for random number
+# generation.
+#
+# As a safety net, hostapd is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data
+# fetched from the OS. This by itself is not considered to be very strong, but
+# it may help in cases where the system pool is not initialized properly.
+# However, it is very strongly recommended that the system pool is initialized
+# with enough entropy either by using hardware assisted random number
+# generator or by storing state over device reboots.
+#
+# hostapd can be configured to maintain its own entropy store over restarts to
+# enhance random number generation. This is not perfect, but it is much more
+# secure than using the same sequence of random numbers after every reboot.
+# This can be enabled with -e<entropy file> command line option. The specified
+# file needs to be readable and writable by hostapd.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal hostapd random pool can be disabled.
+# This will save some in binary size and CPU use. However, this should only be
+# considered for builds that are known to be used on devices that meet the
+# requirements described above.
+CONFIG_NO_RANDOM_POOL=y
+
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+CONFIG_GETRANDOM=y
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used.
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms.
+#CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks.
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
+#CONFIG_SQLITE=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# Testing options
+# This can be used to enable some testing options (see also the example
+# configuration file) that are really useful only for testing clients that
+# connect to this hostapd. These options allow, for example, to drop a
+# certain percentage of probe requests or auth/(re)assoc frames.
+#
+#CONFIG_TESTING_OPTIONS=y
+
+# Automatic Channel Selection
+# This will allow hostapd to pick the channel automatically when channel is set
+# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# You can customize the ACS survey algorithm with the hostapd.conf variable
+# acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#
+#CONFIG_ACS=y
+
+# Multiband Operation support
+# These extentions facilitate efficient use of multiple frequency bands
+# available to the AP and the devices that may associate with it.
+#CONFIG_MBO=y
+
+# Client Taxonomy
+# Has the AP retain the Probe Request and (Re)Association Request frames from
+# a client, from which a signature can be produced which can identify the model
+# of client device like "Nexus 6P" or "iPhone 5s".
+#CONFIG_TAXONOMY=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+#CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Include internal line edit mode in hostapd_cli. This can be used to provide
+# limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Airtime policy support
+#CONFIG_AIRTIME_POLICY=y
+
+# Proxy ARP support
+#CONFIG_PROXYARP=y
+
+# Override default value for the wpa_disable_eapol_key_retries configuration
+# parameter. See that parameter in hostapd.conf for more details.
+#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
+
+# uBus IPC/RPC System
+# Services can connect to the bus and provide methods
+# that can be called by other services or clients.
+CONFIG_UBUS=y
+
+# OpenWrt patch 380-disable-ctrl-iface-mib.patch
+# leads to the MIB only being compiled in if
+# CONFIG_CTRL_IFACE_MIB is enabled.
+#CONFIG_CTRL_IFACE_MIB=y
diff --git a/package/kernel/asr-wl/asr-hostapd/files/hostapd.sh b/package/kernel/asr-wl/asr-hostapd/files/hostapd.sh
new file mode 100644
index 0000000..fb40cad
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/files/hostapd.sh
@@ -0,0 +1,1620 @@
+. /lib/functions/network.sh
+. /lib/functions.sh
+
+wpa_supplicant_add_rate() {
+	local var="$1"
+	local val="$(($2 / 1000))"
+	local sub="$((($2 / 100) % 10))"
+	append $var "$val" ","
+	[ $sub -gt 0 ] && append $var "."
+}
+
+hostapd_add_rate() {
+	local var="$1"
+	local val="$(($2 / 100))"
+	append $var "$val" " "
+}
+
+hostapd_append_wep_key() {
+	local var="$1"
+
+	wep_keyidx=0
+	set_default key 1
+	case "$key" in
+		[1234])
+			for idx in 1 2 3 4; do
+				local zidx
+				zidx="$(($idx - 1))"
+				json_get_var ckey "key${idx}"
+				[ -n "$ckey" ] && \
+					append $var "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N$T"
+			done
+			wep_keyidx="$((key - 1))"
+		;;
+		*)
+			append $var "wep_key0=$(prepare_key_wep "$key")" "$N$T"
+		;;
+	esac
+}
+
+hostapd_append_wpa_key_mgmt() {
+	local auth_type_l="$(echo $auth_type | tr 'a-z' 'A-Z')"
+
+	case "$auth_type" in
+		psk|eap)
+			append wpa_key_mgmt "WPA-$auth_type_l"
+			[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-${auth_type_l}"
+			[ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-${auth_type_l}-SHA256"
+		;;
+		eap192)
+			append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
+			[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP-SHA384"
+		;;
+		eap-eap192)
+			append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
+			append wpa_key_mgmt "WPA-EAP"
+			[ "${ieee80211r:-0}" -gt 0 ] && {
+				append wpa_key_mgmt "FT-EAP-SHA384"
+				append wpa_key_mgmt "FT-EAP"
+			}
+			[ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-EAP-SHA256"
+		;;
+		sae)
+			append wpa_key_mgmt "SAE"
+			[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-SAE"
+		;;
+		psk-sae)
+			append wpa_key_mgmt "WPA-PSK"
+			[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-PSK"
+			[ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-PSK-SHA256"
+			append wpa_key_mgmt "SAE"
+			[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-SAE"
+		;;
+		owe)
+			append wpa_key_mgmt "OWE"
+		;;
+	esac
+
+	[ "$fils" -gt 0 ] && {
+		case "$auth_type" in
+			eap*)
+				append wpa_key_mgmt FILS-SHA256
+				[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt FT-FILS-SHA256
+			;;
+		esac
+	}
+
+	[ "$auth_osen" = "1" ] && append wpa_key_mgmt "OSEN"
+}
+
+hostapd_add_log_config() {
+	config_add_boolean \
+		log_80211 \
+		log_8021x \
+		log_radius \
+		log_wpa \
+		log_driver \
+		log_iapp \
+		log_mlme
+
+	config_add_int log_level
+}
+
+hostapd_common_add_device_config() {
+	config_add_array basic_rate
+	config_add_array supported_rates
+	config_add_string beacon_rate
+
+	config_add_string country country3
+	config_add_boolean country_ie doth
+	config_add_boolean spectrum_mgmt_required
+	config_add_int local_pwr_constraint
+	config_add_string require_mode
+	config_add_string wowlan_triggers
+	config_add_boolean legacy_rates
+	config_add_int cell_density
+	config_add_int rts_threshold
+	config_add_int rssi_reject_assoc_rssi
+	config_add_int rssi_ignore_probe_request
+	config_add_int maxassoc
+
+	config_add_string acs_chan_bias
+	config_add_array hostapd_options
+
+	config_add_int airtime_mode
+	config_add_int mbssid
+
+	hostapd_add_log_config
+}
+
+hostapd_prepare_device_config() {
+	local config="$1"
+	local driver="$2"
+
+	local base_cfg=
+
+	json_get_vars country country3 country_ie beacon_int:100 doth require_mode legacy_rates \
+		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
+		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
+		mbssid:0
+
+	hostapd_set_log_options base_cfg
+
+	set_default country_ie 1
+	set_default spectrum_mgmt_required 0
+	set_default doth 1
+	set_default wowlan_triggers "any"
+	set_default legacy_rates 0
+	set_default airtime_mode 0
+	set_default cell_density 0
+
+	[ -n "$country" ] && {
+		append base_cfg "country_code=$country" "$N"
+		[ -n "$country3" ] && append base_cfg "country3=$country3" "$N"
+
+		[ "$country_ie" -gt 0 ] && {
+			append base_cfg "ieee80211d=1" "$N"
+			[ -n "$local_pwr_constraint" ] && append base_cfg "local_pwr_constraint=$local_pwr_constraint" "$N"
+			[ "$spectrum_mgmt_required" -gt 0 ] && append base_cfg "spectrum_mgmt_required=$spectrum_mgmt_required" "$N"
+		}
+		[ "$hwmode" = "a" -a "$doth" -gt 0 ] && append base_cfg "ieee80211h=1" "$N"
+	}
+
+	[ -n "$acs_chan_bias" ] && append base_cfg "acs_chan_bias=$acs_chan_bias" "$N"
+	[ -n "$wowlan_triggers" ] && append base_cfg "wowlan_triggers=$wowlan_triggers" "$N"
+
+	local brlist= br
+	json_get_values basic_rate_list basic_rate
+	local rlist= r
+	json_get_values rate_list supported_rates
+
+	[ -n "$hwmode" ] && append base_cfg "hw_mode=$hwmode" "$N"
+	if [ "$hwmode" = "g" ] || [ "$hwmode" = "a" ]; then
+		[ -n "$require_mode" ] && legacy_rates=0
+		case "$require_mode" in
+			n) append base_cfg "require_ht=1" "$N";;
+			ac) append base_cfg "require_vht=1" "$N";;
+		esac
+	fi
+	case "$hwmode" in
+		b)
+			if [ "$cell_density" -eq 1 ]; then
+				set_default rate_list "5500 11000"
+				set_default basic_rate_list "5500 11000"
+			elif [ "$cell_density" -ge 2 ]; then
+				set_default rate_list "11000"
+				set_default basic_rate_list "11000"
+			fi
+		;;
+		g)
+			if [ "$cell_density" -eq 0 ] || [ "$cell_density" -eq 1 ]; then
+				if [ "$legacy_rates" -eq 0 ]; then
+					set_default rate_list "6000 9000 12000 18000 24000 36000 48000 54000"
+					set_default basic_rate_list "6000 12000 24000"
+				elif [ "$cell_density" -eq 1 ]; then
+					set_default rate_list "5500 6000 9000 11000 12000 18000 24000 36000 48000 54000"
+					set_default basic_rate_list "5500 11000"
+				fi
+			elif [ "$cell_density" -ge 3 ] && [ "$legacy_rates" -ne 0 ] || [ "$cell_density" -eq 2 ]; then
+				if [ "$legacy_rates" -eq 0 ]; then
+					set_default rate_list "12000 18000 24000 36000 48000 54000"
+					set_default basic_rate_list "12000 24000"
+				else
+					set_default rate_list "11000 12000 18000 24000 36000 48000 54000"
+					set_default basic_rate_list "11000"
+				fi
+			elif [ "$cell_density" -ge 3 ]; then
+				set_default rate_list "24000 36000 48000 54000"
+				set_default basic_rate_list "24000"
+			fi
+		;;
+		a)
+			if [ "$cell_density" -eq 1 ]; then
+				set_default rate_list "6000 9000 12000 18000 24000 36000 48000 54000"
+				set_default basic_rate_list "6000 12000 24000"
+			elif [ "$cell_density" -eq 2 ]; then
+				set_default rate_list "12000 18000 24000 36000 48000 54000"
+				set_default basic_rate_list "12000 24000"
+			elif [ "$cell_density" -ge 3 ]; then
+				set_default rate_list "24000 36000 48000 54000"
+				set_default basic_rate_list "24000"
+			fi
+		;;
+	esac
+
+	for r in $rate_list; do
+		hostapd_add_rate rlist "$r"
+	done
+
+	for br in $basic_rate_list; do
+		hostapd_add_rate brlist "$br"
+	done
+
+	[ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
+	[ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
+	[ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N"
+	[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
+	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
+	append base_cfg "beacon_int=$beacon_int" "$N"
+	[ -n "$rts_threshold" ] && append base_cfg "rts_threshold=$rts_threshold" "$N"
+	[ "$airtime_mode" -gt 0 ] && append base_cfg "airtime_mode=$airtime_mode" "$N"
+	[ -n "$maxassoc" ] && append base_cfg "iface_max_num_sta=$maxassoc" "$N"
+	[ "$mbssid" -gt 0 ] && [ "$mbssid" -le 2 ] && append base_cfg "mbssid=$mbssid" "$N"
+
+	json_get_values opts hostapd_options
+	for val in $opts; do
+		append base_cfg "$val" "$N"
+	done
+
+	cat > "$config" <<EOF
+driver=$driver
+$base_cfg
+EOF
+}
+
+hostapd_common_add_bss_config() {
+	config_add_string 'bssid:macaddr' 'ssid:string'
+	config_add_boolean wds wmm uapsd hidden utf8_ssid ppsk
+
+	config_add_int maxassoc max_inactivity
+	config_add_boolean disassoc_low_ack isolate short_preamble skip_inactivity_poll
+
+	config_add_int \
+		wep_rekey eap_reauth_period \
+		wpa_group_rekey wpa_pair_rekey wpa_master_rekey
+	config_add_boolean wpa_strict_rekey
+	config_add_boolean wpa_disable_eapol_key_retries
+
+	config_add_boolean tdls_prohibit
+
+	config_add_boolean rsn_preauth auth_cache
+	config_add_int ieee80211w
+	config_add_int eapol_version
+
+	config_add_array auth_server acct_server
+	config_add_string 'server:host'
+	config_add_string auth_secret key
+	config_add_int 'auth_port:port' 'port:port'
+
+	config_add_string acct_secret
+	config_add_int acct_port
+	config_add_int acct_interval
+
+	config_add_int bss_load_update_period chan_util_avg_period
+
+	config_add_string dae_client
+	config_add_string dae_secret
+	config_add_int dae_port
+
+	config_add_string nasid
+	config_add_string ownip
+	config_add_string radius_client_addr
+	config_add_string iapp_interface
+	config_add_string eap_type ca_cert client_cert identity anonymous_identity auth priv_key priv_key_pwd
+	config_add_boolean ca_cert_usesystem ca_cert2_usesystem
+	config_add_string subject_match subject_match2
+	config_add_array altsubject_match altsubject_match2
+	config_add_array domain_match domain_match2 domain_suffix_match domain_suffix_match2
+	config_add_string ieee80211w_mgmt_cipher
+
+	config_add_int dynamic_vlan vlan_naming vlan_no_bridge
+	config_add_string vlan_tagged_interface vlan_bridge
+	config_add_string vlan_file
+
+	config_add_string 'key1:wepkey' 'key2:wepkey' 'key3:wepkey' 'key4:wepkey' 'password:wpakey'
+
+	config_add_string wpa_psk_file
+
+	config_add_int multi_ap
+
+	config_add_boolean wps_pushbutton wps_label ext_registrar wps_pbc_in_m1
+	config_add_int wps_ap_setup_locked wps_independent
+	config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin
+	config_add_string multi_ap_backhaul_ssid multi_ap_backhaul_key
+
+	config_add_boolean wnm_sleep_mode wnm_sleep_mode_no_keys bss_transition mbo
+	config_add_int time_advertisement
+	config_add_string time_zone
+	config_add_string vendor_elements
+
+	config_add_boolean ieee80211k rrm_neighbor_report rrm_beacon_report
+
+	config_add_boolean ftm_responder stationary_ap
+	config_add_string lci civic
+
+	config_add_boolean ieee80211r pmk_r1_push ft_psk_generate_local ft_over_ds
+	config_add_int r0_key_lifetime reassociation_deadline
+	config_add_string mobility_domain r1_key_holder
+	config_add_array r0kh r1kh
+
+	config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
+
+	config_add_string macfilter 'macfile:file'
+	config_add_array 'maclist:list(macaddr)'
+
+	config_add_array bssid_blacklist
+	config_add_array bssid_whitelist
+
+	config_add_int mcast_rate
+	config_add_array basic_rate
+	config_add_array supported_rates
+
+	config_add_boolean sae_require_mfp
+	config_add_int sae_pwe
+
+	config_add_string 'owe_transition_bssid:macaddr' 'owe_transition_ssid:string'
+	config_add_string owe_transition_ifname
+
+	config_add_boolean iw_enabled iw_internet iw_asra iw_esr iw_uesa
+	config_add_int iw_access_network_type iw_venue_group iw_venue_type
+	config_add_int iw_ipaddr_type_availability iw_gas_address3
+	config_add_string iw_hessid iw_network_auth_type iw_qos_map_set
+	config_add_array iw_roaming_consortium iw_domain_name iw_anqp_3gpp_cell_net iw_nai_realm
+	config_add_array iw_anqp_elem iw_venue_name iw_venue_url
+
+	config_add_boolean hs20 disable_dgaf osen
+	config_add_int anqp_domain_id
+	config_add_int hs20_deauth_req_timeout
+	config_add_array hs20_oper_friendly_name
+	config_add_array osu_provider
+	config_add_array operator_icon
+	config_add_array hs20_conn_capab
+	config_add_string osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp
+
+	config_add_string hs20_t_c_server_url
+
+	config_add_array airtime_sta_weight
+	config_add_int airtime_bss_weight airtime_bss_limit
+
+	config_add_boolean multicast_to_unicast multicast_to_unicast_all proxy_arp per_sta_vif
+
+	config_add_array hostapd_bss_options
+	config_add_boolean default_disabled
+
+	config_add_boolean request_cui
+	config_add_array radius_auth_req_attr
+	config_add_array radius_acct_req_attr
+
+	config_add_int eap_server
+	config_add_string eap_user_file ca_cert server_cert private_key private_key_passwd server_id
+
+	config_add_boolean fils
+	config_add_string fils_dhcp
+
+	config_add_int ocv
+}
+
+hostapd_set_vlan_file() {
+	local ifname="$1"
+	local vlan="$2"
+	json_get_vars name vid
+	echo "${vid} ${ifname}-${name}" >> /var/run/hostapd-${ifname}.vlan
+	wireless_add_vlan "${vlan}" "${ifname}-${name}"
+}
+
+hostapd_set_vlan() {
+	local ifname="$1"
+
+	rm -f /var/run/hostapd-${ifname}.vlan
+	for_each_vlan hostapd_set_vlan_file ${ifname}
+}
+
+hostapd_set_psk_file() {
+	local ifname="$1"
+	local vlan="$2"
+	local vlan_id=""
+
+	json_get_vars mac vid key
+	set_default mac "00:00:00:00:00:00"
+	[ -n "$vid" ] && vlan_id="vlanid=$vid "
+	echo "${vlan_id} ${mac} ${key}" >> /var/run/hostapd-${ifname}.psk
+}
+
+hostapd_set_psk() {
+	local ifname="$1"
+
+	rm -f /var/run/hostapd-${ifname}.psk
+	for_each_station hostapd_set_psk_file ${ifname}
+}
+
+append_iw_roaming_consortium() {
+	[ -n "$1" ] && append bss_conf "roaming_consortium=$1" "$N"
+}
+
+append_iw_domain_name() {
+	if [ -z "$iw_domain_name_conf" ]; then
+		iw_domain_name_conf="$1"
+	else
+		iw_domain_name_conf="$iw_domain_name_conf,$1"
+	fi
+}
+
+append_iw_anqp_3gpp_cell_net() {
+	if [ -z "$iw_anqp_3gpp_cell_net_conf" ]; then
+		iw_anqp_3gpp_cell_net_conf="$1"
+	else
+		iw_anqp_3gpp_cell_net_conf="$iw_anqp_3gpp_cell_net_conf:$1"
+	fi
+}
+
+append_iw_anqp_elem() {
+	[ -n "$1" ] && append bss_conf "anqp_elem=$1" "$N"
+}
+
+append_iw_nai_realm() {
+	[ -n "$1" ] && append bss_conf "nai_realm=$1" "$N"
+}
+
+append_iw_venue_name() {
+	append bss_conf "venue_name=$1" "$N"
+}
+
+append_iw_venue_url() {
+	append bss_conf "venue_url=$1" "$N"
+}
+
+append_hs20_oper_friendly_name() {
+	append bss_conf "hs20_oper_friendly_name=$1" "$N"
+}
+
+append_osu_provider_friendly_name() {
+	append bss_conf "osu_friendly_name=$1" "$N"
+}
+
+append_osu_provider_service_desc() {
+	append bss_conf "osu_service_desc=$1" "$N"
+}
+
+append_hs20_icon() {
+	local width height lang type path
+	config_get width "$1" width
+	config_get height "$1" height
+	config_get lang "$1" lang
+	config_get type "$1" type
+	config_get path "$1" path
+
+	append bss_conf "hs20_icon=$width:$height:$lang:$type:$1:$path" "$N"
+}
+
+append_hs20_icons() {
+	config_load wireless
+	config_foreach append_hs20_icon hs20-icon
+}
+
+append_operator_icon() {
+	append bss_conf "operator_icon=$1" "$N"
+}
+
+append_osu_icon() {
+	append bss_conf "osu_icon=$1" "$N"
+}
+
+append_osu_provider() {
+	local cfgtype osu_server_uri osu_friendly_name osu_nai osu_nai2 osu_method_list
+
+	config_load wireless
+	config_get cfgtype "$1" TYPE
+	[ "$cfgtype" != "osu-provider" ] && return
+
+	append bss_conf "# provider $1" "$N"
+	config_get osu_server_uri "$1" osu_server_uri
+	config_get osu_nai "$1" osu_nai
+	config_get osu_nai2 "$1" osu_nai2
+	config_get osu_method_list "$1" osu_method
+
+	append bss_conf "osu_server_uri=$osu_server_uri" "$N"
+	append bss_conf "osu_nai=$osu_nai" "$N"
+	append bss_conf "osu_nai2=$osu_nai2" "$N"
+	append bss_conf "osu_method_list=$osu_method_list" "$N"
+
+	config_list_foreach "$1" osu_service_desc append_osu_provider_service_desc
+	config_list_foreach "$1" osu_friendly_name append_osu_friendly_name
+	config_list_foreach "$1" osu_icon append_osu_icon
+
+	append bss_conf "$N"
+}
+
+append_hs20_conn_capab() {
+	[ -n "$1" ] && append bss_conf "hs20_conn_capab=$1" "$N"
+}
+
+append_radius_acct_req_attr() {
+	[ -n "$1" ] && append bss_conf "radius_acct_req_attr=$1" "$N"
+}
+
+append_radius_auth_req_attr() {
+	[ -n "$1" ] && append bss_conf "radius_auth_req_attr=$1" "$N"
+}
+
+append_airtime_sta_weight() {
+	[ -n "$1" ] && append bss_conf "airtime_sta_weight=$1" "$N"
+}
+
+append_auth_server() {
+	[ -n "$1" ] || return
+	append bss_conf "auth_server_addr=$1" "$N"
+	append bss_conf "auth_server_port=$auth_port" "$N"
+	[ -n "$auth_secret" ] && append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
+}
+
+append_acct_server() {
+	[ -n "$1" ] || return
+	append bss_conf "acct_server_addr=$1" "$N"
+	append bss_conf "acct_server_port=$acct_port" "$N"
+	[ -n "$acct_secret" ] && append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
+}
+
+hostapd_set_bss_options() {
+	local var="$1"
+	local phy="$2"
+	local vif="$3"
+
+	wireless_vif_parse_encryption
+
+	local bss_conf bss_md5sum ft_key
+	local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
+
+	json_get_vars \
+		wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_strict_rekey \
+		wpa_disable_eapol_key_retries tdls_prohibit \
+		maxassoc max_inactivity disassoc_low_ack isolate auth_cache \
+		wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 wps_ap_setup_locked \
+		wps_independent wps_device_type wps_device_name wps_manufacturer wps_pin \
+		macfilter ssid utf8_ssid wmm uapsd hidden short_preamble rsn_preauth \
+		iapp_interface eapol_version dynamic_vlan ieee80211w nasid \
+		acct_secret acct_port acct_interval \
+		bss_load_update_period chan_util_avg_period sae_require_mfp sae_pwe \
+		multi_ap multi_ap_backhaul_ssid multi_ap_backhaul_key skip_inactivity_poll \
+		ppsk airtime_bss_weight airtime_bss_limit airtime_sta_weight \
+		multicast_to_unicast_all proxy_arp per_sta_vif \
+		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id \
+		vendor_elements fils ocv
+
+	set_default fils 0
+	set_default isolate 0
+	set_default maxassoc 0
+	set_default max_inactivity 0
+	set_default short_preamble 1
+	set_default disassoc_low_ack 1
+	set_default skip_inactivity_poll 0
+	set_default hidden 0
+	set_default wmm 1
+	set_default uapsd 1
+	set_default wpa_disable_eapol_key_retries 0
+	set_default tdls_prohibit 0
+	set_default eapol_version $((wpa & 1))
+	set_default acct_port 1813
+	set_default utf8_ssid 1
+	set_default multi_ap 0
+	set_default ppsk 0
+	set_default airtime_bss_weight 0
+	set_default airtime_bss_limit 0
+	set_default eap_server 0
+
+	/usr/sbin/hostapd -vfils || fils=0
+
+	append bss_conf "ctrl_interface=/var/run/hostapd"
+	if [ "$isolate" -gt 0 ]; then
+		append bss_conf "ap_isolate=$isolate" "$N"
+	fi
+	if [ "$maxassoc" -gt 0 ]; then
+		append bss_conf "max_num_sta=$maxassoc" "$N"
+	fi
+	if [ "$max_inactivity" -gt 0 ]; then
+		append bss_conf "ap_max_inactivity=$max_inactivity" "$N"
+	fi
+
+	[ "$airtime_bss_weight" -gt 0 ] && append bss_conf "airtime_bss_weight=$airtime_bss_weight" "$N"
+	[ "$airtime_bss_limit" -gt 0 ] && append bss_conf "airtime_bss_limit=$airtime_bss_limit" "$N"
+	json_for_each_item append_airtime_sta_weight airtime_sta_weight
+
+	[ -n "$bss_load_update_period" ] && append bss_conf "bss_load_update_period=$bss_load_update_period" "$N"
+	[ -n "$chan_util_avg_period" ] && append bss_conf "chan_util_avg_period=$chan_util_avg_period" "$N"
+	append bss_conf "disassoc_low_ack=$disassoc_low_ack" "$N"
+	append bss_conf "skip_inactivity_poll=$skip_inactivity_poll" "$N"
+	append bss_conf "preamble=$short_preamble" "$N"
+	append bss_conf "wmm_enabled=$wmm" "$N"
+	append bss_conf "ignore_broadcast_ssid=$hidden" "$N"
+	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
+	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
+	append bss_conf "multi_ap=$multi_ap" "$N"
+	[ -n "$vendor_elements" ] && append bss_conf "vendor_elements=$vendor_elements" "$N"
+
+	[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"
+
+	[ "$wpa" -gt 0 ] && {
+		[ -n "$wpa_group_rekey"  ] && append bss_conf "wpa_group_rekey=$wpa_group_rekey" "$N"
+		[ -n "$wpa_pair_rekey"   ] && append bss_conf "wpa_ptk_rekey=$wpa_pair_rekey"    "$N"
+		[ -n "$wpa_master_rekey" ] && append bss_conf "wpa_gmk_rekey=$wpa_master_rekey"  "$N"
+		[ -n "$wpa_strict_rekey" ] && append bss_conf "wpa_strict_rekey=$wpa_strict_rekey" "$N"
+	}
+
+	set_default nasid "${macaddr//\:}"
+	append bss_conf "nas_identifier=$nasid" "$N"
+
+	[ -n "$acct_interval" ] && \
+		append bss_conf "radius_acct_interim_interval=$acct_interval" "$N"
+	json_for_each_item append_acct_server acct_server
+	json_for_each_item append_radius_acct_req_attr radius_acct_req_attr
+
+	[ -n "$ocv" ] && append bss_conf "ocv=$ocv" "$N"
+
+	case "$auth_type" in
+		sae|owe|eap192|eap-eap192)
+			set_default ieee80211w 2
+			set_default sae_require_mfp 1
+			set_default sae_pwe 2
+		;;
+		psk-sae)
+			set_default ieee80211w 1
+			set_default sae_require_mfp 1
+			set_default sae_pwe 2
+		;;
+	esac
+	[ -n "$sae_require_mfp" ] && append bss_conf "sae_require_mfp=$sae_require_mfp" "$N"
+	[ -n "$sae_pwe" ] && append bss_conf "sae_pwe=$sae_pwe" "$N"
+
+	local vlan_possible=""
+
+	case "$auth_type" in
+		none|owe)
+			json_get_vars owe_transition_bssid owe_transition_ssid owe_transition_ifname
+
+			[ -n "$owe_transition_ssid" ] && append bss_conf "owe_transition_ssid=\"$owe_transition_ssid\"" "$N"
+			[ -n "$owe_transition_bssid" ] && append bss_conf "owe_transition_bssid=$owe_transition_bssid" "$N"
+			[ -n "$owe_transition_ifname" ] && append bss_conf "owe_transition_ifname=$owe_transition_ifname" "$N"
+
+			wps_possible=1
+			# Here we make the assumption that if we're in open mode
+			# with WPS enabled, we got to be in unconfigured state.
+			wps_not_configured=1
+		;;
+		psk|sae|psk-sae)
+			json_get_vars key wpa_psk_file
+			if [ "$auth_type" = "psk" ] && [ "$ppsk" -ne 0 ] ; then
+				json_get_vars auth_secret auth_port
+				set_default auth_port 1812
+				json_for_each_item append_auth_server auth_server
+				append bss_conf "macaddr_acl=2" "$N"
+				append bss_conf "wpa_psk_radius=2" "$N"
+			elif [ ${#key} -eq 64 ]; then
+				append bss_conf "wpa_psk=$key" "$N"
+			elif [ ${#key} -ge 8 ] && [ ${#key} -le 63 ]; then
+				append bss_conf "wpa_passphrase=$key" "$N"
+			elif [ -n "$key" ] || [ -z "$wpa_psk_file" ]; then
+				wireless_setup_vif_failed INVALID_WPA_PSK
+				return 1
+			fi
+			[ -z "$wpa_psk_file" ] && set_default wpa_psk_file /var/run/hostapd-$ifname.psk
+			[ -n "$wpa_psk_file" ] && {
+				[ -e "$wpa_psk_file" ] || touch "$wpa_psk_file"
+				append bss_conf "wpa_psk_file=$wpa_psk_file" "$N"
+			}
+			[ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
+
+			set_default dynamic_vlan 0
+			vlan_possible=1
+			wps_possible=1
+		;;
+		eap|eap192|eap-eap192)
+			json_get_vars \
+				auth_server auth_secret auth_port \
+				dae_client dae_secret dae_port \
+				dynamic_ownip ownip radius_client_addr \
+				eap_reauth_period request_cui \
+				erp_domain mobility_domain \
+				fils_realm fils_dhcp
+
+			# radius can provide VLAN ID for clients
+			vlan_possible=1
+
+			set_default dynamic_ownip 1
+
+			# legacy compatibility
+			[ -n "$auth_server" ] || json_get_var auth_server server
+			[ -n "$auth_port" ] || json_get_var auth_port port
+			[ -n "$auth_secret" ] || json_get_var auth_secret key
+
+			[ "$fils" -gt 0 ] && {
+				set_default erp_domain "$mobility_domain"
+				set_default erp_domain "$(echo "$ssid" | md5sum | head -c 8)"
+				set_default fils_realm "$erp_domain"
+
+				append bss_conf "erp_send_reauth_start=1" "$N"
+				append bss_conf "erp_domain=$erp_domain" "$N"
+				append bss_conf "fils_realm=$fils_realm" "$N"
+				append bss_conf "fils_cache_id=$(echo "$fils_realm" | md5sum | head -c 4)" "$N"
+
+				[ "$fils_dhcp" = "*" ] && {
+					json_get_values network network
+					fils_dhcp=
+					for net in $network; do
+						fils_dhcp="$(ifstatus "$net" | jsonfilter -e '@.data.dhcpserver')"
+						[ -n "$fils_dhcp" ] && break
+					done
+
+					[ -z "$fils_dhcp" -a -n "$network_bridge" -a -n "$network_ifname" ] && \
+						fils_dhcp="$(udhcpc -B -n -q -s /lib/netifd/dhcp-get-server.sh -t 1 -i "$network_ifname" 2>/dev/null)"
+				}
+				[ -n "$fils_dhcp" ] && append bss_conf "dhcp_server=$fils_dhcp" "$N"
+			}
+
+			set_default auth_port 1812
+			set_default dae_port 3799
+			set_default request_cui 0
+
+			[ "$eap_server" -eq 0 ] && json_for_each_item append_auth_server auth_server
+			[ "$request_cui" -gt 0 ] && append bss_conf "radius_request_cui=$request_cui" "$N"
+			[ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
+
+			[ -n "$dae_client" -a -n "$dae_secret" ] && {
+				append bss_conf "radius_das_port=$dae_port" "$N"
+				append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
+			}
+			json_for_each_item append_radius_auth_req_attr radius_auth_req_attr
+
+			if [ -n "$ownip" ]; then
+				append bss_conf "own_ip_addr=$ownip" "$N"
+			elif [ "$dynamic_ownip" -gt 0 ]; then
+				append bss_conf "dynamic_own_ip_addr=$dynamic_ownip" "$N"
+			fi
+
+			[ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
+			append bss_conf "eapol_key_index_workaround=1" "$N"
+			append bss_conf "ieee8021x=1" "$N"
+
+			[ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
+		;;
+		wep)
+			local wep_keyidx=0
+			json_get_vars key
+			hostapd_append_wep_key bss_conf
+			append bss_conf "wep_default_key=$wep_keyidx" "$N"
+			[ -n "$wep_rekey" ] && append bss_conf "wep_rekey_period=$wep_rekey" "$N"
+		;;
+	esac
+
+	case "$auth_type" in
+		none|owe|psk|sae|psk-sae|wep)
+			json_get_vars \
+			auth_server auth_port auth_secret \
+			ownip radius_client_addr
+
+			[ -n "$auth_server" ] &&  {
+				set_default auth_port 1812
+
+				json_for_each_item append_auth_server auth_server
+				[ -n "$ownip" ] && append bss_conf "own_ip_addr=$ownip" "$N"
+				[ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
+				append bss_conf "macaddr_acl=2" "$N"
+			}
+		;;
+	esac
+
+	local auth_algs="$((($auth_mode_shared << 1) | $auth_mode_open))"
+	append bss_conf "auth_algs=${auth_algs:-1}" "$N"
+	append bss_conf "wpa=$wpa" "$N"
+	[ -n "$wpa_pairwise" ] && append bss_conf "wpa_pairwise=$wpa_pairwise" "$N"
+
+	set_default wps_pushbutton 0
+	set_default wps_label 0
+	set_default wps_pbc_in_m1 0
+
+	config_methods=
+	[ "$wps_pushbutton" -gt 0 ] && append config_methods push_button
+	[ "$wps_label" -gt 0 ] && append config_methods label
+
+	# WPS not possible on Multi-AP backhaul-only SSID
+	[ "$multi_ap" = 1 ] && wps_possible=
+
+	[ -n "$wps_possible" -a -n "$config_methods" ] && {
+		set_default ext_registrar 0
+		set_default wps_device_type "6-0050F204-1"
+		set_default wps_device_name "OpenWrt AP"
+		set_default wps_manufacturer "www.openwrt.org"
+		set_default wps_independent 1
+
+		wps_state=2
+		[ -n "$wps_not_configured" ] && wps_state=1
+
+		[ "$ext_registrar" -gt 0 -a -n "$network_bridge" ] && append bss_conf "upnp_iface=$network_bridge" "$N"
+
+		append bss_conf "eap_server=1" "$N"
+		[ -n "$wps_pin" ] && append bss_conf "ap_pin=$wps_pin" "$N"
+		append bss_conf "wps_state=$wps_state" "$N"
+		append bss_conf "device_type=$wps_device_type" "$N"
+		append bss_conf "device_name=$wps_device_name" "$N"
+		append bss_conf "manufacturer=$wps_manufacturer" "$N"
+		append bss_conf "config_methods=$config_methods" "$N"
+		append bss_conf "wps_independent=$wps_independent" "$N"
+		[ -n "$wps_ap_setup_locked" ] && append bss_conf "ap_setup_locked=$wps_ap_setup_locked" "$N"
+		[ "$wps_pbc_in_m1" -gt 0 ] && append bss_conf "pbc_in_m1=$wps_pbc_in_m1" "$N"
+		[ "$multi_ap" -gt 0 ] && [ -n "$multi_ap_backhaul_ssid" ] && {
+			append bss_conf "multi_ap_backhaul_ssid=\"$multi_ap_backhaul_ssid\"" "$N"
+			if [ -z "$multi_ap_backhaul_key" ]; then
+				:
+			elif [ ${#multi_ap_backhaul_key} -lt 8 ]; then
+				wireless_setup_vif_failed INVALID_WPA_PSK
+				return 1
+			elif [ ${#multi_ap_backhaul_key} -eq 64 ]; then
+				append bss_conf "multi_ap_backhaul_wpa_psk=$multi_ap_backhaul_key" "$N"
+			else
+				append bss_conf "multi_ap_backhaul_wpa_passphrase=$multi_ap_backhaul_key" "$N"
+			fi
+		}
+	}
+
+	append bss_conf "ssid=$ssid" "$N"
+	[ -n "$network_bridge" ] && append bss_conf "bridge=$network_bridge${N}wds_bridge=" "$N"
+	[ -n "$network_ifname" ] && append bss_conf "snoop_iface=$network_ifname" "$N"
+	[ -n "$iapp_interface" ] && {
+		local ifname
+		network_get_device ifname "$iapp_interface" || ifname="$iapp_interface"
+		append bss_conf "iapp_interface=$ifname" "$N"
+	}
+
+	json_get_vars time_advertisement time_zone wnm_sleep_mode wnm_sleep_mode_no_keys bss_transition mbo
+	set_default bss_transition 0
+	set_default wnm_sleep_mode 0
+	set_default wnm_sleep_mode_no_keys 0
+	set_default mbo 0
+
+	[ -n "$time_advertisement" ] && append bss_conf "time_advertisement=$time_advertisement" "$N"
+	[ -n "$time_zone" ] && append bss_conf "time_zone=$time_zone" "$N"
+	if [ "$wnm_sleep_mode" -eq "1" ]; then
+		append bss_conf "wnm_sleep_mode=1" "$N"
+		[ "$wnm_sleep_mode_no_keys" -eq "1" ] && append bss_conf "wnm_sleep_mode_no_keys=1" "$N"
+	fi
+	[ "$bss_transition" -eq "1" ] && append bss_conf "bss_transition=1" "$N"
+	[ "$mbo" -eq 1 ] && append bss_conf "mbo=1" "$N"
+
+	json_get_vars ieee80211k rrm_neighbor_report rrm_beacon_report
+	set_default ieee80211k 0
+	if [ "$ieee80211k" -eq "1" ]; then
+		set_default rrm_neighbor_report 1
+		set_default rrm_beacon_report 1
+	else
+		set_default rrm_neighbor_report 0
+		set_default rrm_beacon_report 0
+	fi
+
+	[ "$rrm_neighbor_report" -eq "1" ] && append bss_conf "rrm_neighbor_report=1" "$N"
+	[ "$rrm_beacon_report" -eq "1" ] && append bss_conf "rrm_beacon_report=1" "$N"
+
+	json_get_vars ftm_responder stationary_ap lci civic
+	set_default ftm_responder 0
+	if [ "$ftm_responder" -eq "1" ]; then
+		set_default stationary_ap 0
+		iw phy "$phy" info | grep -q "ENABLE_FTM_RESPONDER" && {
+			append bss_conf "ftm_responder=1" "$N"
+			[ "$stationary_ap" -eq "1" ] && append bss_conf "stationary_ap=1" "$N"
+			[ -n "$lci" ] && append bss_conf "lci=$lci" "$N"
+			[ -n "$civic" ] && append bss_conf "civic=$civic" "$N"
+		}
+	fi
+
+	if [ "$wpa" -ge "1" ]; then
+		json_get_vars ieee80211r
+		set_default ieee80211r 0
+
+		if [ "$ieee80211r" -gt "0" ]; then
+			json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline
+
+			set_default mobility_domain "$(echo "$ssid" | md5sum | head -c 4)"
+			set_default ft_over_ds 0
+			set_default reassociation_deadline 1000
+
+			case "$auth_type" in
+				psk|sae|psk-sae)
+					set_default ft_psk_generate_local 1
+				;;
+				*)
+					set_default ft_psk_generate_local 0
+				;;
+			esac
+
+			[ -n "$network_ifname" ] && append bss_conf "ft_iface=$network_ifname" "$N"
+			append bss_conf "mobility_domain=$mobility_domain" "$N"
+			append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N"
+			append bss_conf "ft_over_ds=$ft_over_ds" "$N"
+			append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
+
+			if [ "$ft_psk_generate_local" -eq "0" ]; then
+				json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push
+				json_get_values r0kh r0kh
+				json_get_values r1kh r1kh
+
+				set_default r0_key_lifetime 10000
+				set_default pmk_r1_push 0
+
+				[ -n "$r0kh" -a -n "$r1kh" ] || {
+					ft_key=`echo -n "$mobility_domain/${auth_secret:-${key}}" | md5sum | awk '{print $1}'`
+
+					set_default r0kh "ff:ff:ff:ff:ff:ff,*,$ft_key"
+					set_default r1kh "00:00:00:00:00:00,00:00:00:00:00:00,$ft_key"
+				}
+
+				[ -n "$r1_key_holder" ] && append bss_conf "r1_key_holder=$r1_key_holder" "$N"
+				append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
+				append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
+
+				for kh in $r0kh; do
+					append bss_conf "r0kh=${kh//,/ }" "$N"
+				done
+				for kh in $r1kh; do
+					append bss_conf "r1kh=${kh//,/ }" "$N"
+				done
+			fi
+		fi
+		if [ "$fils" -gt 0 ]; then
+			json_get_vars fils_realm
+			set_default fils_realm "$(echo "$ssid" | md5sum | head -c 8)"
+		fi
+
+		append bss_conf "wpa_disable_eapol_key_retries=$wpa_disable_eapol_key_retries" "$N"
+
+		hostapd_append_wpa_key_mgmt
+		[ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
+	fi
+
+	if [ "$wpa" -ge "2" ]; then
+		if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then
+			set_default auth_cache 1
+			append bss_conf "rsn_preauth=1" "$N"
+			append bss_conf "rsn_preauth_interfaces=$network_bridge" "$N"
+		else
+			case "$auth_type" in
+			sae|psk-sae|owe)
+				set_default auth_cache 1
+			;;
+			*)
+				set_default auth_cache 0
+			;;
+			esac
+		fi
+
+		append bss_conf "okc=$auth_cache" "$N"
+		[ "$auth_cache" = 0 -a "$fils" = 0 ] && append bss_conf "disable_pmksa_caching=1" "$N"
+
+		# RSN -> allow management frame protection
+		case "$ieee80211w" in
+			[012])
+				json_get_vars ieee80211w_mgmt_cipher ieee80211w_max_timeout ieee80211w_retry_timeout
+				append bss_conf "ieee80211w=$ieee80211w" "$N"
+				[ "$ieee80211w" -gt "0" ] && {
+					if [ "$auth_type" = "eap192" ]; then
+						append bss_conf "group_mgmt_cipher=BIP-GMAC-256" "$N"
+					else
+						append bss_conf "group_mgmt_cipher=${ieee80211w_mgmt_cipher:-AES-128-CMAC}" "$N"
+					fi
+					[ -n "$ieee80211w_max_timeout" ] && \
+						append bss_conf "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
+					[ -n "$ieee80211w_retry_timeout" ] && \
+						append bss_conf "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N"
+				}
+			;;
+		esac
+	fi
+
+	_macfile="/var/run/hostapd-$ifname.maclist"
+	case "$macfilter" in
+		allow)
+			append bss_conf "macaddr_acl=1" "$N"
+			append bss_conf "accept_mac_file=$_macfile" "$N"
+			# accept_mac_file can be used to set MAC to VLAN ID mapping
+			vlan_possible=1
+		;;
+		deny)
+			append bss_conf "macaddr_acl=0" "$N"
+			append bss_conf "deny_mac_file=$_macfile" "$N"
+		;;
+		*)
+			_macfile=""
+		;;
+	esac
+
+	[ -n "$_macfile" ] && {
+		json_get_vars macfile
+		json_get_values maclist maclist
+
+		rm -f "$_macfile"
+		(
+			for mac in $maclist; do
+				echo "$mac"
+			done
+			[ -n "$macfile" -a -f "$macfile" ] && cat "$macfile"
+		) > "$_macfile"
+	}
+
+	[ -n "$vlan_possible" -a -n "$dynamic_vlan" ] && {
+		json_get_vars vlan_naming vlan_tagged_interface vlan_bridge vlan_file vlan_no_bridge
+		set_default vlan_naming 1
+		[ -z "$vlan_file" ] && set_default vlan_file /var/run/hostapd-$ifname.vlan
+		append bss_conf "dynamic_vlan=$dynamic_vlan" "$N"
+		append bss_conf "vlan_naming=$vlan_naming" "$N"
+		if [ -n "$vlan_bridge" ]; then
+			append bss_conf "vlan_bridge=$vlan_bridge" "$N"
+		else
+			set_default vlan_no_bridge 1
+		fi
+		append bss_conf "vlan_no_bridge=$vlan_no_bridge" "$N"
+		[ -n "$vlan_tagged_interface" ] && \
+			append bss_conf "vlan_tagged_interface=$vlan_tagged_interface" "$N"
+		[ -n "$vlan_file" ] && {
+			[ -e "$vlan_file" ] || touch "$vlan_file"
+			append bss_conf "vlan_file=$vlan_file" "$N"
+		}
+	}
+
+	json_get_vars iw_enabled iw_internet iw_asra iw_esr iw_uesa iw_access_network_type
+	json_get_vars iw_hessid iw_venue_group iw_venue_type iw_network_auth_type
+	json_get_vars iw_roaming_consortium iw_domain_name iw_anqp_3gpp_cell_net iw_nai_realm
+	json_get_vars iw_anqp_elem iw_qos_map_set iw_ipaddr_type_availability iw_gas_address3
+	json_get_vars iw_venue_name iw_venue_url
+
+	set_default iw_enabled 0
+	if [ "$iw_enabled" = "1" ]; then
+		append bss_conf "interworking=1" "$N"
+		set_default iw_internet 1
+		set_default iw_asra 0
+		set_default iw_esr 0
+		set_default iw_uesa 0
+
+		append bss_conf "internet=$iw_internet" "$N"
+		append bss_conf "asra=$iw_asra" "$N"
+		append bss_conf "esr=$iw_esr" "$N"
+		append bss_conf "uesa=$iw_uesa" "$N"
+
+		[ -n "$iw_access_network_type" ] && \
+			append bss_conf "access_network_type=$iw_access_network_type" "$N"
+		[ -n "$iw_hessid" ] && append bss_conf "hessid=$iw_hessid" "$N"
+		[ -n "$iw_venue_group" ] && \
+			append bss_conf "venue_group=$iw_venue_group" "$N"
+		[ -n "$iw_venue_type" ] && append bss_conf "venue_type=$iw_venue_type" "$N"
+		[ -n "$iw_network_auth_type" ] && \
+			append bss_conf "network_auth_type=$iw_network_auth_type" "$N"
+		[ -n "$iw_gas_address3" ] && append bss_conf "gas_address3=$iw_gas_address3" "$N"
+
+		json_for_each_item append_iw_roaming_consortium iw_roaming_consortium
+		json_for_each_item append_iw_anqp_elem iw_anqp_elem
+		json_for_each_item append_iw_nai_realm iw_nai_realm
+		json_for_each_item append_iw_venue_name iw_venue_name
+		json_for_each_item append_iw_venue_url iw_venue_url
+
+		iw_domain_name_conf=
+		json_for_each_item append_iw_domain_name iw_domain_name
+		[ -n "$iw_domain_name_conf" ] && \
+			append bss_conf "domain_name=$iw_domain_name_conf" "$N"
+
+		iw_anqp_3gpp_cell_net_conf=
+		json_for_each_item append_iw_anqp_3gpp_cell_net iw_anqp_3gpp_cell_net
+		[ -n "$iw_anqp_3gpp_cell_net_conf" ] && \
+			append bss_conf "anqp_3gpp_cell_net=$iw_anqp_3gpp_cell_net_conf" "$N"
+	fi
+
+	set_default iw_qos_map_set 0,0,2,16,1,1,255,255,18,22,24,38,40,40,44,46,48,56
+	case "$iw_qos_map_set" in
+		*,*);;
+		*) iw_qos_map_set="";;
+	esac
+	[ -n "$iw_qos_map_set" ] && append bss_conf "qos_map_set=$iw_qos_map_set" "$N"
+
+	local hs20 disable_dgaf osen anqp_domain_id hs20_deauth_req_timeout \
+		osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp \
+		hs20_t_c_server_url
+	json_get_vars hs20 disable_dgaf osen anqp_domain_id hs20_deauth_req_timeout \
+		osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp \
+		hs20_t_c_server_url
+
+	set_default hs20 0
+	set_default disable_dgaf $hs20
+	set_default osen 0
+	set_default anqp_domain_id 0
+	set_default hs20_deauth_req_timeout 60
+	if [ "$hs20" = "1" ]; then
+		append bss_conf "hs20=1" "$N"
+		append_hs20_icons
+		append bss_conf "disable_dgaf=$disable_dgaf" "$N"
+		append bss_conf "osen=$osen" "$N"
+		append bss_conf "anqp_domain_id=$anqp_domain_id" "$N"
+		append bss_conf "hs20_deauth_req_timeout=$hs20_deauth_req_timeout" "$N"
+		[ -n "$osu_ssid" ] && append bss_conf "osu_ssid=$osu_ssid" "$N"
+		[ -n "$hs20_wan_metrics" ] && append bss_conf "hs20_wan_metrics=$hs20_wan_metrics" "$N"
+		[ -n "$hs20_operating_class" ] && append bss_conf "hs20_operating_class=$hs20_operating_class" "$N"
+		[ -n "$hs20_t_c_filename" ] && append bss_conf "hs20_t_c_filename=$hs20_t_c_filename" "$N"
+		[ -n "$hs20_t_c_timestamp" ] && append bss_conf "hs20_t_c_timestamp=$hs20_t_c_timestamp" "$N"
+		[ -n "$hs20_t_c_server_url" ] && append bss_conf "hs20_t_c_server_url=$hs20_t_c_server_url" "$N"
+		json_for_each_item append_hs20_oper_friendly_name hs20_oper_friendly_name
+		json_for_each_item append_hs20_conn_capab hs20_conn_capab
+		json_for_each_item append_osu_provider osu_provider
+		json_for_each_item append_operator_icon operator_icon
+	fi
+
+	if [ "$eap_server" = "1" ]; then
+		append bss_conf "eap_server=1" "$N"
+		append bss_conf "eap_server_erp=1" "$N"
+		[ -n "$eap_user_file" ] && append bss_conf "eap_user_file=$eap_user_file" "$N"
+		[ -n "$ca_cert" ] && append bss_conf "ca_cert=$ca_cert" "$N"
+		[ -n "$server_cert" ] && append bss_conf "server_cert=$server_cert" "$N"
+		[ -n "$private_key" ] && append bss_conf "private_key=$private_key" "$N"
+		[ -n "$private_key_passwd" ] && append bss_conf "private_key_passwd=$private_key_passwd" "$N"
+		[ -n "$server_id" ] && append bss_conf "server_id=$server_id" "$N"
+	fi
+
+	set_default multicast_to_unicast_all 0
+	if [ "$multicast_to_unicast_all" -gt 0 ]; then
+		append bss_conf "multicast_to_unicast=$multicast_to_unicast_all" "$N"
+	fi
+	set_default proxy_arp 0
+	if [ "$proxy_arp" -gt 0 ]; then
+		append bss_conf "proxy_arp=$proxy_arp" "$N"
+	fi
+
+	set_default per_sta_vif 0
+	if [ "$per_sta_vif" -gt 0 ]; then
+		append bss_conf "per_sta_vif=$per_sta_vif" "$N"
+	fi
+
+	json_get_values opts hostapd_bss_options
+	for val in $opts; do
+		append bss_conf "$val" "$N"
+	done
+
+	bss_md5sum="$(echo $bss_conf | md5sum | cut -d" " -f1)"
+	append bss_conf "config_id=$bss_md5sum" "$N"
+
+	append "$var" "$bss_conf" "$N"
+	return 0
+}
+
+hostapd_set_log_options() {
+	local var="$1"
+
+	local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
+	json_get_vars log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
+
+	set_default log_level 2
+	set_default log_80211  1
+	set_default log_8021x  1
+	set_default log_radius 1
+	set_default log_wpa    1
+	set_default log_driver 1
+	set_default log_iapp   1
+	set_default log_mlme   1
+
+	local log_mask="$(( \
+		($log_80211  << 0) | \
+		($log_8021x  << 1) | \
+		($log_radius << 2) | \
+		($log_wpa    << 3) | \
+		($log_driver << 4) | \
+		($log_iapp   << 5) | \
+		($log_mlme   << 6)   \
+	))"
+
+	append "$var" "logger_syslog=$log_mask" "$N"
+	append "$var" "logger_syslog_level=$log_level" "$N"
+	append "$var" "logger_stdout=$log_mask" "$N"
+	append "$var" "logger_stdout_level=$log_level" "$N"
+
+	return 0
+}
+
+_wpa_supplicant_common() {
+	local ifname="$1"
+
+	_rpath="/var/run/wpa_supplicant"
+	_config="${_rpath}-$ifname.conf"
+}
+
+wpa_supplicant_teardown_interface() {
+	_wpa_supplicant_common "$1"
+	rm -rf "$_rpath/$1" "$_config"
+}
+
+wpa_supplicant_prepare_interface() {
+	local ifname="$1"
+	_w_driver="$2"
+
+	_wpa_supplicant_common "$1"
+
+	json_get_vars mode wds multi_ap
+
+	[ -n "$network_bridge" ] && {
+		fail=
+		case "$mode" in
+			adhoc)
+				fail=1
+			;;
+			sta)
+				[ "$wds" = 1 -o "$multi_ap" = 1 ] || fail=1
+			;;
+		esac
+
+		[ -n "$fail" ] && {
+			wireless_setup_vif_failed BRIDGE_NOT_ALLOWED
+			return 1
+		}
+	}
+
+	local ap_scan=
+
+	_w_mode="$mode"
+
+	[ "$mode" = adhoc ] && {
+		ap_scan="ap_scan=2"
+	}
+
+	local country_str=
+	[ -n "$country" ] && {
+		country_str="country=$country"
+	}
+
+	multiap_flag_file="${_config}.is_multiap"
+	if [ "$multi_ap" = "1" ]; then
+		touch "$multiap_flag_file"
+	else
+		[ -e "$multiap_flag_file" ] && rm "$multiap_flag_file"
+	fi
+	wpa_supplicant_teardown_interface "$ifname"
+	cat > "$_config" <<EOF
+${scan_list:+freq_list=$scan_list}
+$ap_scan
+$country_str
+EOF
+	return 0
+}
+
+wpa_supplicant_set_fixed_freq() {
+	local freq="$1"
+	local htmode="$2"
+
+	append network_data "fixed_freq=1" "$N$T"
+	append network_data "frequency=$freq" "$N$T"
+	case "$htmode" in
+		NOHT) append network_data "disable_ht=1" "$N$T";;
+		HE20|HT20|VHT20) append network_data "disable_ht40=1" "$N$T";;
+		HT40*|VHT40|VHT80|VHT160|HE40|HE80|HE160) append network_data "ht40=1" "$N$T";;
+	esac
+	case "$htmode" in
+		VHT*) append network_data "vht=1" "$N$T";;
+	esac
+	case "$htmode" in
+		HE80|VHT80) append network_data "max_oper_chwidth=1" "$N$T";;
+		HE160|VHT160) append network_data "max_oper_chwidth=2" "$N$T";;
+		HE20|HE40|VHT20|VHT40) append network_data "max_oper_chwidth=0" "$N$T";;
+		*) append network_data "disable_vht=1" "$N$T";;
+	esac
+}
+
+wpa_supplicant_add_network() {
+	local ifname="$1"
+	local freq="$2"
+	local htmode="$3"
+	local noscan="$4"
+
+	_wpa_supplicant_common "$1"
+	wireless_vif_parse_encryption
+
+	json_get_vars \
+		ssid bssid key \
+		basic_rate mcast_rate \
+		ieee80211w ieee80211r fils ocv \
+		multi_ap \
+		default_disabled
+
+	case "$auth_type" in
+		sae|owe|eap192|eap-eap192)
+			set_default ieee80211w 2
+		;;
+		psk-sae)
+			set_default ieee80211w 1
+		;;
+	esac
+
+	set_default ieee80211r 0
+	set_default multi_ap 0
+	set_default default_disabled 0
+
+	local key_mgmt='NONE'
+	local network_data=
+	local T="	"
+
+	local scan_ssid="scan_ssid=1"
+	local freq wpa_key_mgmt
+
+	[ "$_w_mode" = "adhoc" ] && {
+		append network_data "mode=1" "$N$T"
+		[ -n "$freq" ] && wpa_supplicant_set_fixed_freq "$freq" "$htmode"
+		[ "$noscan" = "1" ] && append network_data "noscan=1" "$N$T"
+
+		scan_ssid="scan_ssid=0"
+
+		[ "$_w_driver" = "nl80211" ] ||	append wpa_key_mgmt "WPA-NONE"
+	}
+
+	[ "$_w_mode" = "mesh" ] && {
+		json_get_vars mesh_id mesh_fwding mesh_rssi_threshold encryption
+		[ -n "$mesh_id" ] && ssid="${mesh_id}"
+
+		append network_data "mode=5" "$N$T"
+		[ -n "$mesh_fwding" ] && append network_data "mesh_fwding=${mesh_fwding}" "$N$T"
+		[ -n "$mesh_rssi_threshold" ] && append network_data "mesh_rssi_threshold=${mesh_rssi_threshold}" "$N$T"
+		[ -n "$freq" ] && wpa_supplicant_set_fixed_freq "$freq" "$htmode"
+		[ "$noscan" = "1" ] && append network_data "noscan=1" "$N$T"
+		[ "$encryption" = "none" -o -z "$encryption" ] || append wpa_key_mgmt "SAE"
+		scan_ssid=""
+	}
+
+	[ "$_w_mode" = "sta" ] && {
+		[ "$multi_ap" = 1 ] && append network_data "multi_ap_backhaul_sta=1" "$N$T"
+		[ "$default_disabled" = 1 ] && append network_data "disabled=1" "$N$T"
+	}
+
+	[ -n "$ocv" ] && append network_data "ocv=$ocv" "$N$T"
+
+	case "$auth_type" in
+		none) ;;
+		owe)
+			hostapd_append_wpa_key_mgmt
+			key_mgmt="$wpa_key_mgmt"
+		;;
+		wep)
+			local wep_keyidx=0
+			hostapd_append_wep_key network_data
+			append network_data "wep_tx_keyidx=$wep_keyidx" "$N$T"
+		;;
+		wps)
+			key_mgmt='WPS'
+		;;
+		psk|sae|psk-sae)
+			local passphrase
+
+			if [ "$_w_mode" != "mesh" ]; then
+				hostapd_append_wpa_key_mgmt
+			fi
+
+			key_mgmt="$wpa_key_mgmt"
+
+			if [ "$_w_mode" = "mesh" ] || [ "$auth_type" = "sae" ]; then
+				passphrase="sae_password=\"${key}\""
+			else
+				if [ ${#key} -eq 64 ]; then
+					passphrase="psk=${key}"
+				else
+					passphrase="psk=\"${key}\""
+				fi
+			fi
+			append network_data "$passphrase" "$N$T"
+		;;
+		eap|eap192|eap-eap192)
+			hostapd_append_wpa_key_mgmt
+			key_mgmt="$wpa_key_mgmt"
+
+			json_get_vars eap_type identity anonymous_identity ca_cert ca_cert_usesystem
+
+			[ "$fils" -gt 0 ] && append network_data "erp=1" "$N$T"
+			if [ "$ca_cert_usesystem" -eq "1" -a -f "/etc/ssl/certs/ca-certificates.crt" ]; then
+				append network_data "ca_cert=\"/etc/ssl/certs/ca-certificates.crt\"" "$N$T"
+			else
+				[ -n "$ca_cert" ] && append network_data "ca_cert=\"$ca_cert\"" "$N$T"
+			fi
+			[ -n "$identity" ] && append network_data "identity=\"$identity\"" "$N$T"
+			[ -n "$anonymous_identity" ] && append network_data "anonymous_identity=\"$anonymous_identity\"" "$N$T"
+			case "$eap_type" in
+				tls)
+					json_get_vars client_cert priv_key priv_key_pwd
+					append network_data "client_cert=\"$client_cert\"" "$N$T"
+					append network_data "private_key=\"$priv_key\"" "$N$T"
+					append network_data "private_key_passwd=\"$priv_key_pwd\"" "$N$T"
+
+					json_get_vars subject_match
+					[ -n "$subject_match" ] && append network_data "subject_match=\"$subject_match\"" "$N$T"
+
+					json_get_values altsubject_match altsubject_match
+					if [ -n "$altsubject_match" ]; then
+						local list=
+						for x in $altsubject_match; do
+							append list "$x" ";"
+						done
+						append network_data "altsubject_match=\"$list\"" "$N$T"
+					fi
+
+					json_get_values domain_match domain_match
+					if [ -n "$domain_match" ]; then
+						local list=
+						for x in $domain_match; do
+							append list "$x" ";"
+						done
+						append network_data "domain_match=\"$list\"" "$N$T"
+					fi
+
+					json_get_values domain_suffix_match domain_suffix_match
+					if [ -n "$domain_suffix_match" ]; then
+						local list=
+						for x in $domain_suffix_match; do
+							append list "$x" ";"
+						done
+						append network_data "domain_suffix_match=\"$list\"" "$N$T"
+					fi
+				;;
+				fast|peap|ttls)
+					json_get_vars auth password ca_cert2 ca_cert2_usesystem client_cert2 priv_key2 priv_key2_pwd
+					set_default auth MSCHAPV2
+
+					if [ "$auth" = "EAP-TLS" ]; then
+						if [ "$ca_cert2_usesystem" -eq "1" -a -f "/etc/ssl/certs/ca-certificates.crt" ]; then
+							append network_data "ca_cert2=\"/etc/ssl/certs/ca-certificates.crt\"" "$N$T"
+						else
+							[ -n "$ca_cert2" ] && append network_data "ca_cert2=\"$ca_cert2\"" "$N$T"
+						fi
+						append network_data "client_cert2=\"$client_cert2\"" "$N$T"
+						append network_data "private_key2=\"$priv_key2\"" "$N$T"
+						append network_data "private_key2_passwd=\"$priv_key2_pwd\"" "$N$T"
+					else
+						append network_data "password=\"$password\"" "$N$T"
+					fi
+
+					json_get_vars subject_match
+					[ -n "$subject_match" ] && append network_data "subject_match=\"$subject_match\"" "$N$T"
+
+					json_get_values altsubject_match altsubject_match
+					if [ -n "$altsubject_match" ]; then
+						local list=
+						for x in $altsubject_match; do
+							append list "$x" ";"
+						done
+						append network_data "altsubject_match=\"$list\"" "$N$T"
+					fi
+
+					json_get_values domain_match domain_match
+					if [ -n "$domain_match" ]; then
+						local list=
+						for x in $domain_match; do
+							append list "$x" ";"
+						done
+						append network_data "domain_match=\"$list\"" "$N$T"
+					fi
+
+					json_get_values domain_suffix_match domain_suffix_match
+					if [ -n "$domain_suffix_match" ]; then
+						local list=
+						for x in $domain_suffix_match; do
+							append list "$x" ";"
+						done
+						append network_data "domain_suffix_match=\"$list\"" "$N$T"
+					fi
+
+					phase2proto="auth="
+					case "$auth" in
+						"auth"*)
+							phase2proto=""
+						;;
+						"EAP-"*)
+							auth="$(echo $auth | cut -b 5- )"
+							[ "$eap_type" = "ttls" ] &&
+								phase2proto="autheap="
+							json_get_vars subject_match2
+							[ -n "$subject_match2" ] && append network_data "subject_match2=\"$subject_match2\"" "$N$T"
+
+							json_get_values altsubject_match2 altsubject_match2
+							if [ -n "$altsubject_match2" ]; then
+								local list=
+								for x in $altsubject_match2; do
+									append list "$x" ";"
+								done
+								append network_data "altsubject_match2=\"$list\"" "$N$T"
+							fi
+
+							json_get_values domain_match2 domain_match2
+							if [ -n "$domain_match2" ]; then
+								local list=
+								for x in $domain_match2; do
+									append list "$x" ";"
+								done
+								append network_data "domain_match2=\"$list\"" "$N$T"
+							fi
+
+							json_get_values domain_suffix_match2 domain_suffix_match2
+							if [ -n "$domain_suffix_match2" ]; then
+								local list=
+								for x in $domain_suffix_match2; do
+									append list "$x" ";"
+								done
+								append network_data "domain_suffix_match2=\"$list\"" "$N$T"
+							fi
+						;;
+					esac
+					append network_data "phase2=\"$phase2proto$auth\"" "$N$T"
+				;;
+			esac
+			append network_data "eap=$(echo $eap_type | tr 'a-z' 'A-Z')" "$N$T"
+		;;
+	esac
+
+	[ "$wpa_cipher" = GCMP ] && {
+		append network_data "pairwise=GCMP" "$N$T"
+		append network_data "group=GCMP" "$N$T"
+	}
+
+	[ "$mode" = mesh ] || {
+		case "$wpa" in
+			1)
+				append network_data "proto=WPA" "$N$T"
+			;;
+			2)
+				append network_data "proto=RSN" "$N$T"
+			;;
+		esac
+
+		case "$ieee80211w" in
+			[012])
+				[ "$wpa" -ge 2 ] && append network_data "ieee80211w=$ieee80211w" "$N$T"
+			;;
+		esac
+	}
+	[ -n "$bssid" ] && append network_data "bssid=$bssid" "$N$T"
+	[ -n "$beacon_int" ] && append network_data "beacon_int=$beacon_int" "$N$T"
+
+	local bssid_blacklist bssid_whitelist
+	json_get_values bssid_blacklist bssid_blacklist
+	json_get_values bssid_whitelist bssid_whitelist
+
+	[ -n "$bssid_blacklist" ] && append network_data "bssid_blacklist=$bssid_blacklist" "$N$T"
+	[ -n "$bssid_whitelist" ] && append network_data "bssid_whitelist=$bssid_whitelist" "$N$T"
+
+	[ -n "$basic_rate" ] && {
+		local br rate_list=
+		for br in $basic_rate; do
+			wpa_supplicant_add_rate rate_list "$br"
+		done
+		[ -n "$rate_list" ] && append network_data "rates=$rate_list" "$N$T"
+	}
+
+	[ -n "$mcast_rate" ] && {
+		local mc_rate=
+		wpa_supplicant_add_rate mc_rate "$mcast_rate"
+		append network_data "mcast_rate=$mc_rate" "$N$T"
+	}
+
+	if [ "$key_mgmt" = "WPS" ]; then
+		echo "wps_cred_processing=1" >> "$_config"
+	else
+		cat >> "$_config" <<EOF
+network={
+	$scan_ssid
+	ssid="$ssid"
+	key_mgmt=$key_mgmt
+	$network_data
+}
+EOF
+	fi
+	return 0
+}
+
+wpa_supplicant_run() {
+	local ifname="$1"
+	local hostapd_ctrl="$2"
+
+	_wpa_supplicant_common "$ifname"
+
+	ubus wait_for wpa_supplicant
+	local supplicant_res="$(ubus call wpa_supplicant config_add "{ \
+		\"driver\": \"${_w_driver:-wext}\", \"ctrl\": \"$_rpath\", \
+		\"iface\": \"$ifname\", \"config\": \"$_config\" \
+		${network_bridge:+, \"bridge\": \"$network_bridge\"} \
+		${hostapd_ctrl:+, \"hostapd_ctrl\": \"$hostapd_ctrl\"} \
+		}")"
+
+	ret="$?"
+
+	[ "$ret" != 0 -o -z "$supplicant_res" ] && wireless_setup_vif_failed WPA_SUPPLICANT_FAILED
+
+	wireless_add_process "$(jsonfilter -s "$supplicant_res" -l 1 -e @.pid)" "/usr/sbin/wpa_supplicant" 1 1
+
+	return $ret
+}
+
+hostapd_common_cleanup() {
+	killall meshd-nl80211
+}
diff --git a/package/kernel/asr-wl/asr-hostapd/files/multicall.c b/package/kernel/asr-wl/asr-hostapd/files/multicall.c
new file mode 100644
index 0000000..c8e814b
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/files/multicall.c
@@ -0,0 +1,28 @@
+#include <stdio.h>
+#include <string.h>
+#include <stdbool.h>
+
+extern int hostapd_main(int argc, char **argv);
+extern int wpa_supplicant_main(int argc, char **argv);
+
+int main(int argc, char **argv)
+{
+	bool restart = false;
+	const char *prog = argv[0];
+
+restart:
+	if (strstr(argv[0], "hostapd"))
+		return hostapd_main(argc, argv);
+	else if (strstr(argv[0], "wpa_supplicant"))
+		return wpa_supplicant_main(argc, argv);
+
+	if (!restart && argc > 1) {
+		argv++;
+		argc--;
+		restart = true;
+		goto restart;
+	}
+
+	fprintf(stderr, "Invalid command.\nUsage: %s wpa_supplicant|hostapd [<arguments>]\n", prog);
+	return 255;
+}
diff --git a/package/kernel/asr-wl/asr-hostapd/files/radius.clients b/package/kernel/asr-wl/asr-hostapd/files/radius.clients
new file mode 100644
index 0000000..3175dcf
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/files/radius.clients
@@ -0,0 +1 @@
+0.0.0.0/0 radius
diff --git a/package/kernel/asr-wl/asr-hostapd/files/radius.config b/package/kernel/asr-wl/asr-hostapd/files/radius.config
new file mode 100644
index 0000000..ad87307
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/files/radius.config
@@ -0,0 +1,9 @@
+config radius
+	option disabled '1'
+	option ca_cert '/etc/radius/ca.pem'
+	option cert '/etc/radius/cert.pem'
+	option key '/etc/radius/key.pem'
+	option users '/etc/radius/users'
+	option clients '/etc/radius/clients'
+	option auth_port '1812'
+	option acct_port '1813'
diff --git a/package/kernel/asr-wl/asr-hostapd/files/radius.init b/package/kernel/asr-wl/asr-hostapd/files/radius.init
new file mode 100644
index 0000000..4c562c2
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/files/radius.init
@@ -0,0 +1,42 @@
+#!/bin/sh /etc/rc.common
+
+START=30
+
+USE_PROCD=1
+NAME=radius
+
+radius_start() {
+	local cfg="$1"
+
+	config_get_bool disabled "$cfg" disabled 0
+
+	[ "$disabled" -gt 0 ] && return
+
+	config_get ca "$cfg" ca_cert
+	config_get key "$cfg" key
+	config_get cert "$cfg" cert
+	config_get users "$cfg" users
+	config_get clients "$cfg" clients
+	config_get auth_port "$cfg" auth_port 1812
+	config_get acct_port "$cfg" acct_port 1813
+	config_get identity "$cfg" identity "$(cat /proc/sys/kernel/hostname)"
+
+	procd_open_instance $cfg
+	procd_set_param command /usr/sbin/hostapd-radius \
+		-C "$ca" \
+		-c "$cert" -k "$key" \
+		-s "$clients" -u "$users" \
+		-p "$auth_port" -P "$acct_port" \
+		-i "$identity"
+	procd_close_instance
+}
+
+start_service() {
+	config_load radius
+	config_foreach radius_start radius
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger "radius"
+}
diff --git a/package/kernel/asr-wl/asr-hostapd/files/radius.users b/package/kernel/asr-wl/asr-hostapd/files/radius.users
new file mode 100644
index 0000000..03e2fc8
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/files/radius.users
@@ -0,0 +1,14 @@
+{
+	"phase1": {
+		"wildcard": [
+			{
+				"name": "*",
+				"methods": [ "PEAP" ]
+			}
+		]
+	},
+	"phase2": {
+		"users": {
+		}
+	}
+}
diff --git a/package/kernel/asr-wl/asr-hostapd/files/wpa_supplicant-basic.config b/package/kernel/asr-wl/asr-hostapd/files/wpa_supplicant-basic.config
new file mode 100644
index 0000000..944b4d9
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/files/wpa_supplicant-basic.config
@@ -0,0 +1,625 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# wpa_supplicant binary. All lines starting with # are ignored. Configuration
+# option lines must be commented out complete, if they are not to be included,
+# i.e., just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
+#CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for MACsec capable Qualcomm Atheros drivers
+#CONFIG_DRIVER_MACSEC_QCA=y
+
+# Driver interface for Linux MACsec drivers
+#CONFIG_DRIVER_MACSEC_LINUX=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Solaris libraries
+#LIBS += -lsocket -ldlpi -lnsl
+#LIBS_c += -lsocket
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
+# MACsec is included)
+#CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+#CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+#CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+#CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+#CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+#CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+#CONFIG_EAP_FAST=y
+
+# EAP-TEAP
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
+# EAP-GTC
+#CONFIG_EAP_GTC=y
+
+# EAP-OTP
+#CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# Enable SIM simulator (Milenage) for EAP-SIM
+#CONFIG_SIM_SIMULATOR=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd (secure authentication using only a password)
+#CONFIG_EAP_PWD=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+#CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable WPS external registrar functionality
+#CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# EAP-EKE
+#CONFIG_EAP_EKE=y
+
+# MACsec
+#CONFIG_MACSEC=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+#CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+#CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+CONFIG_HT_OVERRIDES=y
+
+# Support VHT overrides (disable VHT, mask MCS rates, etc.)
+CONFIG_VHT_OVERRIDES=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# udp6 = UDP IPv6 sockets using localhost (::1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Include internal line edit mode in wpa_cli. This can be used as a replacement
+# for GNU Readline to provide limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Simultaneous Authentication of Equals (SAE), WPA3-Personal
+#CONFIG_SAE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+#	path is given on command line, not here; this option is just used to
+#	select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operating system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+#CONFIG_ELOOP=eloop
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# Disable Linux packet socket workaround applicable for station interface
+# in a bridge for EAPOL frames. This should be uncommented only if the kernel
+# is known to not have the regression issue in packet socket behavior with
+# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
+CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
+
+# IEEE 802.11w (management frame protection), also known as PMF
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Support Operating Channel Validation
+CONFIG_OCV=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+#CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
+CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Add support for writing debug log to Android logcat instead of standard
+# output
+#CONFIG_ANDROID_LOG=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+CONFIG_NO_RANDOM_POOL=y
+
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+CONFIG_GETRANDOM=y
+
+# IEEE 802.11n (High Throughput) support (mainly for AP mode)
+#CONFIG_IEEE80211N=y
+
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+# (depends on CONFIG_IEEE80211N)
+#CONFIG_IEEE80211AC=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Enable interface matching in wpa_supplicant
+#CONFIG_MATCH_IFACE=y
+
+# Disable roaming in wpa_supplicant
+#CONFIG_NO_ROAMING=y
+
+# AP mode operations with wpa_supplicant
+# This can be used for controlling AP mode operations with wpa_supplicant. It
+# should be noted that this is mainly aimed at simple cases like
+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
+# external RADIUS server can be supported with hostapd.
+#CONFIG_AP=y
+
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+#CONFIG_P2P=y
+
+# Enable TDLS support
+#CONFIG_TDLS=y
+
+# Wi-Fi Display
+# This can be used to enable Wi-Fi Display extensions for P2P using an external
+# program to control the additional information exchanges in the messages.
+#CONFIG_WIFI_DISPLAY=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+#CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+#CONFIG_AUTOSCAN_PERIODIC=y
+
+# Password (and passphrase, etc.) backend for external storage
+# These optional mechanisms can be used to add support for storing passwords
+# and other secrets in external (to wpa_supplicant) location. This allows, for
+# example, operating system specific key storage to be used
+#
+# External password backend for testing purposes (developer use)
+#CONFIG_EXT_PASSWORD_TEST=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# OS X builds. This is only for building eapol_test.
+#CONFIG_OSX=y
+
+# Automatic Channel Selection
+# This will allow wpa_supplicant to pick the channel automatically when channel
+# is set to "0".
+#
+# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
+# to "channel=0". This would enable us to eventually add other ACS algorithms in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
+# a newly to create wpa_supplicant.conf variable acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#CONFIG_ACS=y
+
+# Support Multi Band Operation
+#CONFIG_MBO=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+#CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Support RSN on IBSS networks
+# This is needed to be able to use mode=1 network profile with proto=RSN and
+# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
+#CONFIG_IBSS_RSN=y
+
+# External PMKSA cache control
+# This can be used to enable control interface commands that allow the current
+# PMKSA cache entries to be fetched and new entries to be added.
+#CONFIG_PMKSA_CACHE_EXTERNAL=y
+
+# Mesh Networking (IEEE 802.11s)
+#CONFIG_MESH=y
+
+# Background scanning modules
+# These can be used to request wpa_supplicant to perform background scanning
+# operations for roaming within an ESS (same SSID). See the bgscan parameter in
+# the wpa_supplicant.conf file for more details.
+# Periodic background scans based on signal strength
+#CONFIG_BGSCAN_SIMPLE=y
+# Learn channels used by the network and try to avoid bgscans on other
+# channels (experimental)
+#CONFIG_BGSCAN_LEARN=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Device Provisioning Protocol (DPP)
+# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
+# wpa_supplicant/README-DPP for details)
+#CONFIG_DPP=y
+
+# uBus IPC/RPC System
+# Services can connect to the bus and provide methods
+# that can be called by other services or clients.
+CONFIG_UBUS=y
+
+# OpenWrt patch 380-disable-ctrl-iface-mib.patch
+# leads to the MIB only being compiled in if
+# CONFIG_CTRL_IFACE_MIB is enabled.
+#CONFIG_CTRL_IFACE_MIB=y
diff --git a/package/kernel/asr-wl/asr-hostapd/files/wpa_supplicant-full.config b/package/kernel/asr-wl/asr-hostapd/files/wpa_supplicant-full.config
new file mode 100644
index 0000000..b39dabc
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/files/wpa_supplicant-full.config
@@ -0,0 +1,625 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# wpa_supplicant binary. All lines starting with # are ignored. Configuration
+# option lines must be commented out complete, if they are not to be included,
+# i.e., just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
+#CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for MACsec capable Qualcomm Atheros drivers
+#CONFIG_DRIVER_MACSEC_QCA=y
+
+# Driver interface for Linux MACsec drivers
+#CONFIG_DRIVER_MACSEC_LINUX=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Solaris libraries
+#LIBS += -lsocket -ldlpi -lnsl
+#LIBS_c += -lsocket
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
+# MACsec is included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+CONFIG_EAP_FAST=y
+
+# EAP-TEAP
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# Enable SIM simulator (Milenage) for EAP-SIM
+#CONFIG_SIM_SIMULATOR=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd (secure authentication using only a password)
+#CONFIG_EAP_PWD=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+CONFIG_WPS=y
+# Enable WPS external registrar functionality
+#CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# EAP-EKE
+#CONFIG_EAP_EKE=y
+
+# MACsec
+#CONFIG_MACSEC=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+CONFIG_HT_OVERRIDES=y
+
+# Support VHT overrides (disable VHT, mask MCS rates, etc.)
+CONFIG_VHT_OVERRIDES=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# udp6 = UDP IPv6 sockets using localhost (::1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Include internal line edit mode in wpa_cli. This can be used as a replacement
+# for GNU Readline to provide limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Simultaneous Authentication of Equals (SAE), WPA3-Personal
+#CONFIG_SAE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+#	path is given on command line, not here; this option is just used to
+#	select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operating system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+#CONFIG_ELOOP=eloop
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# Disable Linux packet socket workaround applicable for station interface
+# in a bridge for EAPOL frames. This should be uncommented only if the kernel
+# is known to not have the regression issue in packet socket behavior with
+# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
+CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
+
+# IEEE 802.11w (management frame protection), also known as PMF
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Support Operating Channel Validation
+CONFIG_OCV=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+#CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
+CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Add support for writing debug log to Android logcat instead of standard
+# output
+#CONFIG_ANDROID_LOG=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+CONFIG_NO_RANDOM_POOL=y
+
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+CONFIG_GETRANDOM=y
+
+# IEEE 802.11n (High Throughput) support (mainly for AP mode)
+#CONFIG_IEEE80211N=y
+
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+# (depends on CONFIG_IEEE80211N)
+#CONFIG_IEEE80211AC=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+CONFIG_WNM=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+CONFIG_HS20=y
+
+# Enable interface matching in wpa_supplicant
+#CONFIG_MATCH_IFACE=y
+
+# Disable roaming in wpa_supplicant
+#CONFIG_NO_ROAMING=y
+
+# AP mode operations with wpa_supplicant
+# This can be used for controlling AP mode operations with wpa_supplicant. It
+# should be noted that this is mainly aimed at simple cases like
+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
+# external RADIUS server can be supported with hostapd.
+#CONFIG_AP=y
+
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+#CONFIG_P2P=y
+
+# Enable TDLS support
+#CONFIG_TDLS=y
+
+# Wi-Fi Display
+# This can be used to enable Wi-Fi Display extensions for P2P using an external
+# program to control the additional information exchanges in the messages.
+#CONFIG_WIFI_DISPLAY=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+#CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+#CONFIG_AUTOSCAN_PERIODIC=y
+
+# Password (and passphrase, etc.) backend for external storage
+# These optional mechanisms can be used to add support for storing passwords
+# and other secrets in external (to wpa_supplicant) location. This allows, for
+# example, operating system specific key storage to be used
+#
+# External password backend for testing purposes (developer use)
+#CONFIG_EXT_PASSWORD_TEST=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# OS X builds. This is only for building eapol_test.
+#CONFIG_OSX=y
+
+# Automatic Channel Selection
+# This will allow wpa_supplicant to pick the channel automatically when channel
+# is set to "0".
+#
+# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
+# to "channel=0". This would enable us to eventually add other ACS algorithms in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
+# a newly to create wpa_supplicant.conf variable acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#CONFIG_ACS=y
+
+# Support Multi Band Operation
+#CONFIG_MBO=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Support RSN on IBSS networks
+# This is needed to be able to use mode=1 network profile with proto=RSN and
+# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
+CONFIG_IBSS_RSN=y
+
+# External PMKSA cache control
+# This can be used to enable control interface commands that allow the current
+# PMKSA cache entries to be fetched and new entries to be added.
+#CONFIG_PMKSA_CACHE_EXTERNAL=y
+
+# Mesh Networking (IEEE 802.11s)
+#CONFIG_MESH=y
+
+# Background scanning modules
+# These can be used to request wpa_supplicant to perform background scanning
+# operations for roaming within an ESS (same SSID). See the bgscan parameter in
+# the wpa_supplicant.conf file for more details.
+# Periodic background scans based on signal strength
+#CONFIG_BGSCAN_SIMPLE=y
+# Learn channels used by the network and try to avoid bgscans on other
+# channels (experimental)
+#CONFIG_BGSCAN_LEARN=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Device Provisioning Protocol (DPP)
+# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
+# wpa_supplicant/README-DPP for details)
+#CONFIG_DPP=y
+
+# uBus IPC/RPC System
+# Services can connect to the bus and provide methods
+# that can be called by other services or clients.
+CONFIG_UBUS=y
+
+# OpenWrt patch 380-disable-ctrl-iface-mib.patch
+# leads to the MIB only being compiled in if
+# CONFIG_CTRL_IFACE_MIB is enabled.
+CONFIG_CTRL_IFACE_MIB=y
diff --git a/package/kernel/asr-wl/asr-hostapd/files/wpa_supplicant-mini.config b/package/kernel/asr-wl/asr-hostapd/files/wpa_supplicant-mini.config
new file mode 100644
index 0000000..2a3f8fb
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/files/wpa_supplicant-mini.config
@@ -0,0 +1,625 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# wpa_supplicant binary. All lines starting with # are ignored. Configuration
+# option lines must be commented out complete, if they are not to be included,
+# i.e., just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
+#CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for MACsec capable Qualcomm Atheros drivers
+#CONFIG_DRIVER_MACSEC_QCA=y
+
+# Driver interface for Linux MACsec drivers
+#CONFIG_DRIVER_MACSEC_LINUX=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Solaris libraries
+#LIBS += -lsocket -ldlpi -lnsl
+#LIBS_c += -lsocket
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
+# MACsec is included)
+#CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+#CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+#CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+#CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+#CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+#CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+#CONFIG_EAP_FAST=y
+
+# EAP-TEAP
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
+# EAP-GTC
+#CONFIG_EAP_GTC=y
+
+# EAP-OTP
+#CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# Enable SIM simulator (Milenage) for EAP-SIM
+#CONFIG_SIM_SIMULATOR=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd (secure authentication using only a password)
+#CONFIG_EAP_PWD=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+#CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable WPS external registrar functionality
+#CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# EAP-EKE
+#CONFIG_EAP_EKE=y
+
+# MACsec
+#CONFIG_MACSEC=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+#CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+#CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+CONFIG_HT_OVERRIDES=y
+
+# Support VHT overrides (disable VHT, mask MCS rates, etc.)
+CONFIG_VHT_OVERRIDES=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# udp6 = UDP IPv6 sockets using localhost (::1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Include internal line edit mode in wpa_cli. This can be used as a replacement
+# for GNU Readline to provide limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Simultaneous Authentication of Equals (SAE), WPA3-Personal
+#CONFIG_SAE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+#	path is given on command line, not here; this option is just used to
+#	select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operating system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+#CONFIG_ELOOP=eloop
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# Disable Linux packet socket workaround applicable for station interface
+# in a bridge for EAPOL frames. This should be uncommented only if the kernel
+# is known to not have the regression issue in packet socket behavior with
+# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
+CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
+
+# IEEE 802.11w (management frame protection), also known as PMF
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Support Operating Channel Validation
+#CONFIG_OCV=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+#CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Add support for writing debug log to Android logcat instead of standard
+# output
+#CONFIG_ANDROID_LOG=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+CONFIG_NO_RANDOM_POOL=y
+
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+CONFIG_GETRANDOM=y
+
+# IEEE 802.11n (High Throughput) support (mainly for AP mode)
+#CONFIG_IEEE80211N=y
+
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+# (depends on CONFIG_IEEE80211N)
+#CONFIG_IEEE80211AC=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Enable interface matching in wpa_supplicant
+#CONFIG_MATCH_IFACE=y
+
+# Disable roaming in wpa_supplicant
+#CONFIG_NO_ROAMING=y
+
+# AP mode operations with wpa_supplicant
+# This can be used for controlling AP mode operations with wpa_supplicant. It
+# should be noted that this is mainly aimed at simple cases like
+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
+# external RADIUS server can be supported with hostapd.
+#CONFIG_AP=y
+
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+#CONFIG_P2P=y
+
+# Enable TDLS support
+#CONFIG_TDLS=y
+
+# Wi-Fi Display
+# This can be used to enable Wi-Fi Display extensions for P2P using an external
+# program to control the additional information exchanges in the messages.
+#CONFIG_WIFI_DISPLAY=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+#CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+#CONFIG_AUTOSCAN_PERIODIC=y
+
+# Password (and passphrase, etc.) backend for external storage
+# These optional mechanisms can be used to add support for storing passwords
+# and other secrets in external (to wpa_supplicant) location. This allows, for
+# example, operating system specific key storage to be used
+#
+# External password backend for testing purposes (developer use)
+#CONFIG_EXT_PASSWORD_TEST=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# OS X builds. This is only for building eapol_test.
+#CONFIG_OSX=y
+
+# Automatic Channel Selection
+# This will allow wpa_supplicant to pick the channel automatically when channel
+# is set to "0".
+#
+# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
+# to "channel=0". This would enable us to eventually add other ACS algorithms in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
+# a newly to create wpa_supplicant.conf variable acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#CONFIG_ACS=y
+
+# Support Multi Band Operation
+#CONFIG_MBO=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+#CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Support RSN on IBSS networks
+# This is needed to be able to use mode=1 network profile with proto=RSN and
+# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
+#CONFIG_IBSS_RSN=y
+
+# External PMKSA cache control
+# This can be used to enable control interface commands that allow the current
+# PMKSA cache entries to be fetched and new entries to be added.
+#CONFIG_PMKSA_CACHE_EXTERNAL=y
+
+# Mesh Networking (IEEE 802.11s)
+#CONFIG_MESH=y
+
+# Background scanning modules
+# These can be used to request wpa_supplicant to perform background scanning
+# operations for roaming within an ESS (same SSID). See the bgscan parameter in
+# the wpa_supplicant.conf file for more details.
+# Periodic background scans based on signal strength
+#CONFIG_BGSCAN_SIMPLE=y
+# Learn channels used by the network and try to avoid bgscans on other
+# channels (experimental)
+#CONFIG_BGSCAN_LEARN=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Device Provisioning Protocol (DPP)
+# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
+# wpa_supplicant/README-DPP for details)
+#CONFIG_DPP=y
+
+# uBus IPC/RPC System
+# Services can connect to the bus and provide methods
+# that can be called by other services or clients.
+CONFIG_UBUS=y
+
+# OpenWrt patch 380-disable-ctrl-iface-mib.patch
+# leads to the MIB only being compiled in if
+# CONFIG_CTRL_IFACE_MIB is enabled.
+#CONFIG_CTRL_IFACE_MIB=y
diff --git a/package/kernel/asr-wl/asr-hostapd/files/wpa_supplicant-p2p.config b/package/kernel/asr-wl/asr-hostapd/files/wpa_supplicant-p2p.config
new file mode 100644
index 0000000..7f51406
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/files/wpa_supplicant-p2p.config
@@ -0,0 +1,625 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# wpa_supplicant binary. All lines starting with # are ignored. Configuration
+# option lines must be commented out complete, if they are not to be included,
+# i.e., just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
+#CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for MACsec capable Qualcomm Atheros drivers
+#CONFIG_DRIVER_MACSEC_QCA=y
+
+# Driver interface for Linux MACsec drivers
+#CONFIG_DRIVER_MACSEC_LINUX=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Solaris libraries
+#LIBS += -lsocket -ldlpi -lnsl
+#LIBS_c += -lsocket
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
+# MACsec is included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+CONFIG_EAP_FAST=y
+
+# EAP-TEAP
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# Enable SIM simulator (Milenage) for EAP-SIM
+#CONFIG_SIM_SIMULATOR=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd (secure authentication using only a password)
+#CONFIG_EAP_PWD=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+CONFIG_WPS=y
+# Enable WPS external registrar functionality
+#CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# EAP-EKE
+#CONFIG_EAP_EKE=y
+
+# MACsec
+#CONFIG_MACSEC=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+CONFIG_HT_OVERRIDES=y
+
+# Support VHT overrides (disable VHT, mask MCS rates, etc.)
+CONFIG_VHT_OVERRIDES=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# udp6 = UDP IPv6 sockets using localhost (::1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Include internal line edit mode in wpa_cli. This can be used as a replacement
+# for GNU Readline to provide limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Simultaneous Authentication of Equals (SAE), WPA3-Personal
+#CONFIG_SAE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+#	path is given on command line, not here; this option is just used to
+#	select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operating system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+#CONFIG_ELOOP=eloop
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# Disable Linux packet socket workaround applicable for station interface
+# in a bridge for EAPOL frames. This should be uncommented only if the kernel
+# is known to not have the regression issue in packet socket behavior with
+# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
+CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
+
+# IEEE 802.11w (management frame protection), also known as PMF
+# Driver support is also needed for IEEE 802.11w.
+CONFIG_IEEE80211W=y
+
+# Support Operating Channel Validation
+#CONFIG_OCV=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+#CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Add support for writing debug log to Android logcat instead of standard
+# output
+#CONFIG_ANDROID_LOG=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+CONFIG_NO_RANDOM_POOL=y
+
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+CONFIG_GETRANDOM=y
+
+# IEEE 802.11n (High Throughput) support (mainly for AP mode)
+#CONFIG_IEEE80211N=y
+
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+# (depends on CONFIG_IEEE80211N)
+#CONFIG_IEEE80211AC=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Enable interface matching in wpa_supplicant
+#CONFIG_MATCH_IFACE=y
+
+# Disable roaming in wpa_supplicant
+#CONFIG_NO_ROAMING=y
+
+# AP mode operations with wpa_supplicant
+# This can be used for controlling AP mode operations with wpa_supplicant. It
+# should be noted that this is mainly aimed at simple cases like
+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
+# external RADIUS server can be supported with hostapd.
+CONFIG_AP=y
+
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+CONFIG_P2P=y
+
+# Enable TDLS support
+#CONFIG_TDLS=y
+
+# Wi-Fi Display
+# This can be used to enable Wi-Fi Display extensions for P2P using an external
+# program to control the additional information exchanges in the messages.
+#CONFIG_WIFI_DISPLAY=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+#CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+#CONFIG_AUTOSCAN_PERIODIC=y
+
+# Password (and passphrase, etc.) backend for external storage
+# These optional mechanisms can be used to add support for storing passwords
+# and other secrets in external (to wpa_supplicant) location. This allows, for
+# example, operating system specific key storage to be used
+#
+# External password backend for testing purposes (developer use)
+#CONFIG_EXT_PASSWORD_TEST=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# OS X builds. This is only for building eapol_test.
+#CONFIG_OSX=y
+
+# Automatic Channel Selection
+# This will allow wpa_supplicant to pick the channel automatically when channel
+# is set to "0".
+#
+# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
+# to "channel=0". This would enable us to eventually add other ACS algorithms in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
+# a newly to create wpa_supplicant.conf variable acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#CONFIG_ACS=y
+
+# Support Multi Band Operation
+#CONFIG_MBO=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Support RSN on IBSS networks
+# This is needed to be able to use mode=1 network profile with proto=RSN and
+# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
+CONFIG_IBSS_RSN=y
+
+# External PMKSA cache control
+# This can be used to enable control interface commands that allow the current
+# PMKSA cache entries to be fetched and new entries to be added.
+#CONFIG_PMKSA_CACHE_EXTERNAL=y
+
+# Mesh Networking (IEEE 802.11s)
+#CONFIG_MESH=y
+
+# Background scanning modules
+# These can be used to request wpa_supplicant to perform background scanning
+# operations for roaming within an ESS (same SSID). See the bgscan parameter in
+# the wpa_supplicant.conf file for more details.
+# Periodic background scans based on signal strength
+#CONFIG_BGSCAN_SIMPLE=y
+# Learn channels used by the network and try to avoid bgscans on other
+# channels (experimental)
+#CONFIG_BGSCAN_LEARN=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Device Provisioning Protocol (DPP)
+# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
+# wpa_supplicant/README-DPP for details)
+#CONFIG_DPP=y
+
+# uBus IPC/RPC System
+# Services can connect to the bus and provide methods
+# that can be called by other services or clients.
+CONFIG_UBUS=y
+
+# OpenWrt patch 380-disable-ctrl-iface-mib.patch
+# leads to the MIB only being compiled in if
+# CONFIG_CTRL_IFACE_MIB is enabled.
+CONFIG_CTRL_IFACE_MIB=y
diff --git a/package/kernel/asr-wl/asr-hostapd/files/wpad.init b/package/kernel/asr-wl/asr-hostapd/files/wpad.init
new file mode 100644
index 0000000..65d46df
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/files/wpad.init
@@ -0,0 +1,43 @@
+#!/bin/sh /etc/rc.common
+
+START=19
+STOP=21
+
+USE_PROCD=1
+NAME=wpad
+
+start_service() {
+	if [ -x "/usr/sbin/hostapd" ]; then
+		mkdir -p /var/run/hostapd
+		chown network:network /var/run/hostapd
+		procd_open_instance hostapd
+		procd_set_param command /usr/sbin/hostapd -s -g /var/run/hostapd/global
+		procd_set_param respawn 3600 1 0
+		procd_set_param limits core="unlimited"
+		[ -x /sbin/ujail -a -e /etc/capabilities/wpad.json ] && {
+			procd_add_jail hostapd
+			procd_set_param capabilities /etc/capabilities/wpad.json
+			procd_set_param user network
+			procd_set_param group network
+			procd_set_param no_new_privs 1
+		}
+		procd_close_instance
+	fi
+
+	if [ -x "/usr/sbin/wpa_supplicant" ]; then
+		mkdir -p /var/run/wpa_supplicant
+		chown network:network /var/run/wpa_supplicant
+		procd_open_instance supplicant
+		procd_set_param command /usr/sbin/wpa_supplicant -n -s -g /var/run/wpa_supplicant/global
+		procd_set_param respawn 3600 1 0
+		procd_set_param limits core="unlimited"
+		[ -x /sbin/ujail -a -e /etc/capabilities/wpad.json ] && {
+			procd_add_jail wpa_supplicant
+			procd_set_param capabilities /etc/capabilities/wpad.json
+			procd_set_param user network
+			procd_set_param group network
+			procd_set_param no_new_privs 1
+		}
+		procd_close_instance
+	fi
+}
diff --git a/package/kernel/asr-wl/asr-hostapd/files/wpad.json b/package/kernel/asr-wl/asr-hostapd/files/wpad.json
new file mode 100644
index 0000000..c73f3d9
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/files/wpad.json
@@ -0,0 +1,22 @@
+{
+	"bounding": [
+		"CAP_NET_ADMIN",
+		"CAP_NET_RAW"
+	],
+	"effective": [
+		"CAP_NET_ADMIN",
+		"CAP_NET_RAW"
+	],
+	"ambient": [
+		"CAP_NET_ADMIN",
+		"CAP_NET_RAW"
+	],
+	"permitted": [
+		"CAP_NET_ADMIN",
+		"CAP_NET_RAW"
+	],
+	"inheritable": [
+		"CAP_NET_ADMIN",
+		"CAP_NET_RAW"
+	]
+}
diff --git a/package/kernel/asr-wl/asr-hostapd/files/wpad_acl.json b/package/kernel/asr-wl/asr-hostapd/files/wpad_acl.json
new file mode 100644
index 0000000..c77ccd8
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/files/wpad_acl.json
@@ -0,0 +1,10 @@
+{
+	"user": "network",
+	"access": {
+		"service": {
+			"methods": [ "event" ]
+		}
+	},
+	"publish": [ "hostapd", "hostapd.*", "wpa_supplicant", "wpa_supplicant.*" ],
+	"send": [ "bss.*", "wps_credentials" ]
+}
diff --git a/package/kernel/asr-wl/asr-hostapd/files/wps-hotplug.sh b/package/kernel/asr-wl/asr-hostapd/files/wps-hotplug.sh
new file mode 100644
index 0000000..073bdd1
--- /dev/null
+++ b/package/kernel/asr-wl/asr-hostapd/files/wps-hotplug.sh
@@ -0,0 +1,69 @@
+#!/bin/sh
+
+wps_catch_credentials() {
+	local iface ifaces ifc ifname ssid encryption key radio radios
+	local found=0
+
+	. /usr/share/libubox/jshn.sh
+	ubus -S -t 30 listen wps_credentials | while read creds; do
+		json_init
+		json_load "$creds"
+		json_select wps_credentials || continue
+		json_get_vars ifname ssid key encryption
+		local ifcname="$ifname"
+		json_init
+		json_load "$(ubus -S call network.wireless status)"
+		json_get_keys radios
+		for radio in $radios; do
+			json_select $radio
+			json_select interfaces
+			json_get_keys ifaces
+			for ifc in $ifaces; do
+				json_select $ifc
+				json_get_vars ifname
+				[ "$ifname" = "$ifcname" ] && {
+					ubus -S call uci set "{\"config\":\"wireless\", \"type\":\"wifi-iface\",		\
+								\"match\": { \"device\": \"$radio\", \"encryption\": \"wps\" },	\
+								\"values\": { \"encryption\": \"$encryption\", 			\
+										\"ssid\": \"$ssid\", 				\
+										\"key\": \"$key\" } }"
+					ubus -S call uci commit '{"config": "wireless"}'
+					ubus -S call uci apply
+				}
+				json_select ..
+			done
+			json_select ..
+			json_select ..
+		done
+	done
+}
+
+if [ "$ACTION" = "released" ] && [ "$BUTTON" = "wps" ]; then
+	# If the button was pressed for 3 seconds or more, trigger WPS on
+	# wpa_supplicant only, no matter if hostapd is running or not.  If
+	# was pressed for less than 3 seconds, try triggering on
+	# hostapd. If there is no hostapd instance to trigger it on or WPS
+	# is not enabled on them, trigger it on wpa_supplicant.
+	if [ "$SEEN" -lt 3 ] ; then
+		wps_done=0
+		ubusobjs="$( ubus -S list hostapd.* )"
+		for ubusobj in $ubusobjs; do
+			ubus -S call $ubusobj wps_start && wps_done=1
+		done
+		[ $wps_done = 0 ] || return 0
+	fi
+	wps_done=0
+	ubusobjs="$( ubus -S list wpa_supplicant.* )"
+	for ubusobj in $ubusobjs; do
+		ifname="$(echo $ubusobj | cut -d'.' -f2 )"
+		multi_ap=""
+		if [ -e "/var/run/wpa_supplicant-${ifname}.conf.is_multiap" ]; then
+			ubus -S call $ubusobj wps_start '{ "multi_ap": true }' && wps_done=1
+		else
+			ubus -S call $ubusobj wps_start && wps_done=1
+		fi
+	done
+	[ $wps_done = 0 ] || wps_catch_credentials &
+fi
+
+return 0