ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/package/kernel/broadcom-wl/Makefile b/package/kernel/broadcom-wl/Makefile
new file mode 100644
index 0000000..7188c49
--- /dev/null
+++ b/package/kernel/broadcom-wl/Makefile
@@ -0,0 +1,184 @@
+#
+# Copyright (C) 2006-2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=broadcom-wl
+PKG_VERSION:=5.10.56.27.3
+PKG_RELEASE:=10
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(ARCH).tar.bz2
+PKG_SOURCE_URL:=@OPENWRT
+
+ifeq ($(ARCH),mipsel)
+PKG_HASH:=26a8c370f48fc129d0731cfd751c36cae1419b0bc8ca35781126744e60eae009
+endif
+ifeq ($(ARCH),mips)
+PKG_HASH:=ca6a86ca3e3e9c85b6dbb665b35bcbf338c37829c1b2f1994487d55664886045
+endif
+
+PKG_EXTMOD_SUBDIRS:=driver driver-mini glue
+
+PKG_USE_MIPS16:=0
+PKG_FLAGS:=nonshared
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/broadcom-wl/Default
+ SECTION:=kernel
+ CATEGORY:=Kernel modules
+ DEPENDS:=@(PACKAGE_kmod-brcm-wl||PACKAGE_kmod-brcm-wl-mini)
+ SUBMENU:=Proprietary BCM43xx WiFi driver
+ SUBMENUDEP:=(TARGET_bcm47xx||TARGET_bcm63xx)
+endef
+
+define KernelPackage/brcm-wl/Default
+ $(call Package/broadcom-wl/Default)
+ SECTION:=kernel
+ DEPENDS:=@(TARGET_bcm47xx||TARGET_bcm63xx) +wireless-tools
+ TITLE:=Kernel driver for BCM43xx chipsets
+ FILES:=$(PKG_BUILD_DIR)/driver$(1)/wl.ko $(PKG_BUILD_DIR)/glue/wl_glue.ko
+ AUTOLOAD:=$(call AutoProbe,wl)
+endef
+
+define KernelPackage/brcm-wl/Default/description
+ This package contains the proprietary wireless driver for the Broadcom
+ BCM43xx chipset.
+endef
+
+define KernelPackage/brcm-wl
+$(call KernelPackage/brcm-wl/Default,)
+ TITLE+= (normal version)
+endef
+
+define KernelPackage/brcm-wl/description
+$(call KernelPackage/brcm-wl/Default/description)
+endef
+
+define KernelPackage/brcm-wl-mini
+$(call KernelPackage/brcm-wl/Default,-mini)
+ TITLE+= (Legacy version)
+endef
+
+define KernelPackage/brcm-wl-mini/description
+$(call KernelPackage/brcm-wl/Default/description)
+endef
+
+define Package/wlc
+$(call Package/broadcom-wl/Default)
+ TITLE:=wl driver setup utility
+endef
+
+define Package/wlc/description
+ This package contains an utility for initializing the proprietary Broadcom
+ wl driver.
+endef
+
+define Package/wl
+$(call Package/broadcom-wl/Default)
+ TITLE:=Proprietary Broadcom wl driver config utility
+endef
+
+define Package/wl/description
+ This package contains the proprietary utility (wl) for configuring the
+ proprietary Broadcom wl driver.
+endef
+
+define Package/nas
+$(call Package/broadcom-wl/Default)
+ TITLE:=Proprietary Broadcom WPA/WPA2 authenticator
+endef
+
+define Package/nas/description
+ This package contains the proprietary WPA/WPA2 authenticator (nas) for the
+ proprietary Broadcom wl driver.
+endef
+
+MAKE_KMOD := $(MAKE) -C "$(LINUX_DIR)" \
+ $(KERNEL_MAKE_FLAGS) \
+ PATH="$(TARGET_PATH)" \
+ M="$(PKG_BUILD_DIR)/kmod" \
+
+define Build/Prepare
+ $(call Build/Prepare/Default)
+ $(CP) $(PKG_BUILD_DIR)/driver $(PKG_BUILD_DIR)/driver-mini
+ $(CP) ./src/glue $(PKG_BUILD_DIR)/glue
+endef
+
+define Build/Compile
+ # Compile glue driver
+ $(MAKE_KMOD) -C "$(LINUX_DIR)" \
+ M="$(PKG_BUILD_DIR)/glue" \
+ modules
+
+ # Compile the kernel part
+ $(MAKE_KMOD) \
+ M="$(PKG_BUILD_DIR)/driver" \
+ MODFLAGS="-DMODULE -mlong-calls" \
+ KBUILD_EXTRA_SYMBOLS="$(PKG_BUILD_DIR)/glue/Module.symvers" \
+ modules
+
+ $(MAKE_KMOD) \
+ M="$(PKG_BUILD_DIR)/driver-mini" \
+ MODFLAGS="-DMODULE -mlong-calls" \
+ BUILD_TYPE="wl_apsta_mini" \
+ KBUILD_EXTRA_SYMBOLS="$(PKG_BUILD_DIR)/glue/Module.symvers" \
+ modules
+
+ # Compile libshared
+ $(MAKE) -C $(PKG_BUILD_DIR)/shared \
+ $(TARGET_CONFIGURE_OPTS) \
+ CFLAGS="$(TARGET_CFLAGS) -I. -I$(PKG_BUILD_DIR)/driver/include" \
+ all
+
+ $(TARGET_CC) -o $(PKG_BUILD_DIR)/wlc \
+ -I$(PKG_BUILD_DIR)/shared -I$(PKG_BUILD_DIR)/driver/include \
+ ./src/wlc.c $(PKG_BUILD_DIR)/shared/libshared.a
+
+ $(TARGET_CC) -o $(PKG_BUILD_DIR)/nas \
+ $(PKG_BUILD_DIR)/nas_exe.o \
+ $(PKG_BUILD_DIR)/shared/libshared.a
+
+ $(TARGET_CC) -o $(PKG_BUILD_DIR)/wl \
+ $(PKG_BUILD_DIR)/wl_exe.o \
+ $(PKG_BUILD_DIR)/shared/libshared.a
+endef
+
+define Build/InstallDev
+ $(INSTALL_DIR) $(1)/usr/lib
+ $(CP) $(PKG_BUILD_DIR)/shared/libshared.a $(1)/usr/lib/
+endef
+
+define Package/wlc/install
+ $(CP) ./files/* $(1)/
+ $(INSTALL_DIR) $(1)/sbin
+ $(INSTALL_BIN) $(PKG_BUILD_DIR)/wlc $(1)/sbin/
+endef
+
+define Package/wlc/postinst
+#!/bin/sh
+[ -n "$${IPKG_INSTROOT}" ] || /etc/init.d/wlunbind enable || true
+endef
+
+define Package/wl/install
+ $(INSTALL_DIR) $(1)/usr/sbin
+ $(INSTALL_BIN) $(PKG_BUILD_DIR)/wl $(1)/usr/sbin/
+endef
+
+define Package/nas/install
+ $(INSTALL_DIR) $(1)/usr/sbin
+ $(INSTALL_BIN) $(PKG_BUILD_DIR)/nas $(1)/usr/sbin/
+ $(LN) nas $(1)/usr/sbin/nas4not
+ $(LN) nas $(1)/usr/sbin/nas4wds
+endef
+
+$(eval $(call KernelPackage,brcm-wl))
+$(eval $(call KernelPackage,brcm-wl-mini))
+$(eval $(call BuildPackage,wlc))
+$(eval $(call BuildPackage,wl))
+$(eval $(call BuildPackage,nas))
diff --git a/package/kernel/broadcom-wl/files/etc/hotplug.d/net/00-broadcom-wifi-detect b/package/kernel/broadcom-wl/files/etc/hotplug.d/net/00-broadcom-wifi-detect
new file mode 100644
index 0000000..a63d6bc
--- /dev/null
+++ b/package/kernel/broadcom-wl/files/etc/hotplug.d/net/00-broadcom-wifi-detect
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+[ "${ACTION}" = "add" ] && [ "${INTERFACE%%[0-9]}" = "wl" ] && {
+ /sbin/wifi config
+}
diff --git a/package/kernel/broadcom-wl/files/etc/hotplug.d/net/20-broadcom_wds b/package/kernel/broadcom-wl/files/etc/hotplug.d/net/20-broadcom_wds
new file mode 100644
index 0000000..35c4218
--- /dev/null
+++ b/package/kernel/broadcom-wl/files/etc/hotplug.d/net/20-broadcom_wds
@@ -0,0 +1,61 @@
+include /lib/wifi
+
+setup_broadcom_wds() {
+ local iface="$1"
+ local remote="$(wlc ifname "$iface" wdsmac)"
+
+ [ -z "$remote" ] && return
+
+ config_cb() {
+ [ -z "$CONFIG_SECTION" ] && return
+
+ config_get type "$CONFIG_SECTION" TYPE
+ [ "$type" = "wifi-iface" ] || return
+
+ config_get network "$CONFIG_SECTION" network
+ [ -z "$network" ] && return
+
+ config_get addr "$CONFIG_SECTION" bssid
+ addr=$(echo "$addr" | tr 'A-F' 'a-f')
+ [ "$addr" = "$remote" ] && {
+ local cfg="$CONFIG_SECTION"
+
+ include /lib/network
+ scan_interfaces
+
+ for network in $network; do
+ setup_interface "$iface" "$network"
+ done
+
+ config_get encryption "$cfg" encryption
+ config_get key "$cfg" key
+ config_get ssid "$cfg" ssid
+
+ [ "$encryption" != "none" ] && {
+ sleep 5
+ case "$encryption" in
+ psk|PSK)
+ nas4not "$network" "$iface" up auto tkip psk "$key" "$ssid"
+ ;;
+ psk2|PSK2)
+ nas4not "$network" "$iface" up auto aes psk "$key" "$ssid"
+ ;;
+ psk+psk2|psk2+psk|PSK+PSK2|PSK2+PSK)
+ nas4not "$network" "$iface" up auto aes+tkip psk "$key" "$ssid"
+ ;;
+ *)
+ nas4not lan "$iface" up auto aes "$encryption" "$key" "$ssid"
+ ;;
+ esac
+ }
+ }
+ }
+
+ config_load wireless
+}
+
+case "$ACTION" in
+ add|register)
+ [ "${INTERFACE%%[0-1]-*}" = wds ] && setup_broadcom_wds "$INTERFACE"
+ ;;
+esac
diff --git a/package/kernel/broadcom-wl/files/etc/init.d/wlunbind b/package/kernel/broadcom-wl/files/etc/init.d/wlunbind
new file mode 100755
index 0000000..0a29db5
--- /dev/null
+++ b/package/kernel/broadcom-wl/files/etc/init.d/wlunbind
@@ -0,0 +1,29 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2010-2011 OpenWrt.org
+
+START=09
+
+unbind_driver() {
+ local driver="$1"
+ local sysfs="/sys/bus/pci/drivers/$driver"
+ if [ -d "$sysfs" ]; then
+ local lnk
+ for lnk in $sysfs/*; do
+ [ -h "$lnk" ] || continue
+ case "${lnk##*/}" in
+ *:*:*.*)
+ logger "Unbinding WL PCI device ${lnk##*/} from $driver"
+ echo -n "${lnk##*/}" > "$sysfs/unbind"
+ ;;
+ esac
+ done
+ fi
+}
+
+boot() {
+ unbind_driver b43-pci-bridge
+ unbind_driver bcma-pci-bridge
+}
+
+start() { :; }
+stop() { :; }
diff --git a/package/kernel/broadcom-wl/files/lib/wifi/broadcom.sh b/package/kernel/broadcom-wl/files/lib/wifi/broadcom.sh
new file mode 100644
index 0000000..352c365
--- /dev/null
+++ b/package/kernel/broadcom-wl/files/lib/wifi/broadcom.sh
@@ -0,0 +1,480 @@
+append DRIVERS "broadcom"
+
+scan_broadcom() {
+ local device="$1"
+ local vif vifs wds
+ local adhoc sta apmode mon disabled
+ local adhoc_if sta_if ap_if mon_if
+
+ config_get vifs "$device" vifs
+ for vif in $vifs; do
+ config_get_bool disabled "$vif" disabled 0
+ [ $disabled -eq 0 ] || continue
+
+ local mode
+ config_get mode "$vif" mode
+ case "$mode" in
+ adhoc)
+ adhoc=1
+ adhoc_if="$vif"
+ ;;
+ sta)
+ sta=1
+ sta_if="$vif"
+ ;;
+ ap)
+ apmode=1
+ ap_if="${ap_if:+$ap_if }$vif"
+ ;;
+ wds)
+ local addr
+ config_get addr "$vif" bssid
+ [ -z "$addr" ] || {
+ addr=$(echo "$addr" | tr 'A-F' 'a-f')
+ append wds "$addr"
+ }
+ ;;
+ monitor)
+ mon=1
+ mon_if="$vif"
+ ;;
+ *) echo "$device($vif): Invalid mode";;
+ esac
+ done
+ config_set "$device" wds "$wds"
+
+ local _c=
+ for vif in ${adhoc_if:-$sta_if $ap_if $mon_if}; do
+ config_set "$vif" ifname "${device}${_c:+-$_c}"
+ _c=$((${_c:-0} + 1))
+ done
+ config_set "$device" vifs "${adhoc_if:-$sta_if $ap_if $mon_if}"
+
+ ap=1
+ infra=1
+ if [ "$_c" -gt 1 ]; then
+ mssid=1
+ else
+ mssid=
+ fi
+ apsta=0
+ radio=1
+ monitor=0
+ case "$adhoc:$sta:$apmode:$mon" in
+ 1*)
+ ap=0
+ mssid=
+ infra=0
+ ;;
+ :1:1:)
+ apsta=1
+ wet=1
+ ;;
+ :1::)
+ wet=1
+ ap=0
+ mssid=
+ ;;
+ :::1)
+ wet=1
+ ap=0
+ mssid=
+ monitor=1
+ ;;
+ ::)
+ radio=0
+ ;;
+ esac
+}
+
+disable_broadcom() {
+ local device="$1"
+ set_wifi_down "$device"
+ (
+ include /lib/network
+
+ local pid_file=/var/run/nas.$device.pid
+ [ -e $pid_file ] && start-stop-daemon -K -q -s SIGKILL -p $pid_file && rm $pid_file
+
+ # make sure the interfaces are down and removed from all bridges
+ local dev ifname
+ for dev in /sys/class/net/wds${device##wl}-* /sys/class/net/${device}-* /sys/class/net/${device}; do
+ if [ -e "$dev" ]; then
+ ifname=${dev##/sys/class/net/}
+ ip link set dev "$ifname" down
+ unbridge "$ifname"
+ fi
+ done
+
+ # make sure all of the devices are disabled in the driver
+ local ifdown=
+ local bssmax=$(wlc ifname "$device" bssmax)
+ local vif=$((${bssmax:-4} - 1))
+ append ifdown "down" "$N"
+ append ifdown "wds none" "$N"
+ while [ $vif -ge 0 ]; do
+ append ifdown "vif $vif" "$N"
+ append ifdown "enabled 0" "$N"
+ vif=$(($vif - 1))
+ done
+
+ wlc ifname "$device" stdin <<EOF
+$ifdown
+leddc 0xffff
+EOF
+ )
+ true
+}
+
+enable_broadcom() {
+ local device="$1"
+ local channel country maxassoc wds vifs distance slottime rxantenna txantenna
+ local frameburst macfilter maclist macaddr txpower frag rts hwmode htmode
+ config_get channel "$device" channel
+ config_get country "$device" country
+ config_get maxassoc "$device" maxassoc
+ config_get wds "$device" wds
+ config_get vifs "$device" vifs
+ config_get distance "$device" distance
+ config_get slottime "$device" slottime
+ config_get rxantenna "$device" rxantenna
+ config_get txantenna "$device" txantenna
+ config_get_bool frameburst "$device" frameburst
+ config_get macfilter "$device" macfilter
+ config_get maclist "$device" maclist
+ config_get macaddr "$device" macaddr $(wlc ifname "$device" default_bssid)
+ config_get txpower "$device" txpower
+ config_get frag "$device" frag
+ config_get rts "$device" rts
+ config_get hwmode "$device" hwmode
+ config_get htmode "$device" htmode
+ local doth=0
+ local wmm=1
+
+ [ -z "$slottime" ] && {
+ [ -n "$distance" ] && {
+ # slottime = 9 + (distance / 150) + (distance % 150 ? 1 : 0)
+ slottime="$((9 + ($distance / 150) + 1 - (150 - ($distance % 150)) / 150 ))"
+ }
+ } || {
+ slottime="${slottime:--1}"
+ }
+
+ case "$macfilter" in
+ allow|2)
+ macfilter=2;
+ ;;
+ deny|1)
+ macfilter=1;
+ ;;
+ disable|none|0)
+ macfilter=0;
+ ;;
+ esac
+
+ local gmode=2 nmode=0 nreqd=
+ case "$hwmode" in
+ *a) gmode=;;
+ *b) gmode=0;;
+ *bg) gmode=1;;
+ *g) gmode=2;;
+ *gst) gmode=4;;
+ *lrs) gmode=5;;
+ *) nmode=1; nreqd=0;;
+ esac
+
+ case "$hwmode" in
+ n|11n) nmode=1; nreqd=1;;
+ *n*) nmode=1; nreqd=0;;
+ esac
+
+ # Use 'nmode' for N-Phy only
+ [ "$(wlc ifname "$device" phytype)" = 4 ] || nmode=
+
+ local band chanspec
+ [ ${channel:-0} -ge 1 -a ${channel:-0} -le 14 ] && band=2
+ [ ${channel:-0} -ge 36 ] && {
+ band=1
+ gmode=
+ }
+
+ # Use 'chanspec' instead of 'channel' for 'N' modes (See bcmwifi.h)
+ [ -n "$nmode" -a -n "$band" -a -n "$channel" ] && {
+ case "$htmode" in
+ HT40)
+ if [ -n "$gmode" ]; then
+ [ $channel -lt 7 ] && htmode="HT40+" || htmode="HT40-"
+ else
+ [ $(( ($channel / 4) % 2 )) -eq 1 ] && htmode="HT40+" || htmode="HT40-"
+ fi
+ ;;
+ esac
+ case "$htmode" in
+ HT40-) chanspec=$(printf 0x%x%x%02x $band 0xe $(($channel - 2))); nmode=1; channel=;;
+ HT40+) chanspec=$(printf 0x%x%x%02x $band 0xd $(($channel + 2))); nmode=1; channel=;;
+ HT20) chanspec=$(printf 0x%x%x%02x $band 0xb $channel); nmode=1; channel=;;
+ *) ;;
+ esac
+ }
+
+ local leddc=$(wlc ifname "$device" leddc)
+ [ $((leddc)) -eq $((0xffff)) ] && {
+ leddc=0x005a000a;
+ }
+
+ local _c=0
+ local nas="$(command -v nas)"
+ local if_pre_up if_up nas_cmd
+ local vif vif_pre_up vif_post_up vif_do_up vif_txpower
+ local bssmax=$(wlc ifname "$device" bssmax)
+ bssmax=${bssmax:-4}
+
+ for vif in $vifs; do
+ [ $_c -ge $bssmax ] && break
+
+ config_get vif_txpower "$vif" txpower
+
+ local mode
+ config_get mode "$vif" mode
+ append vif_pre_up "vif $_c" "$N"
+ append vif_post_up "vif $_c" "$N"
+ append vif_do_up "vif $_c" "$N"
+
+ config_get_bool wmm "$vif" wmm "$wmm"
+ config_get_bool doth "$vif" doth "$doth"
+
+ [ "$mode" = "sta" ] || {
+ local hidden isolate
+ config_get_bool hidden "$vif" hidden 0
+ append vif_pre_up "closed $hidden" "$N"
+ config_get_bool isolate "$vif" isolate 0
+ append vif_pre_up "ap_isolate $isolate" "$N"
+ }
+
+ local wsec_r=0
+ local eap_r=0
+ local wsec=0
+ local auth=0
+ local nasopts=
+ local enc key rekey
+
+ config_get enc "$vif" encryption
+ case "$enc" in
+ *wep*)
+ local def defkey k knr
+ wsec_r=1
+ wsec=1
+ defkey=1
+ config_get key "$vif" key
+ case "$enc" in
+ *shared*) append vif_do_up "wepauth 1" "$N";;
+ *) append vif_do_up "wepauth 0" "$N";;
+ esac
+ case "$key" in
+ [1234])
+ defkey="$key"
+ for knr in 1 2 3 4; do
+ config_get k "$vif" key$knr
+ [ -n "$k" ] || continue
+ [ "$defkey" = "$knr" ] && def="=" || def=""
+ append vif_do_up "wepkey $def$knr,$k" "$N"
+ done
+ ;;
+ "");;
+ *) append vif_do_up "wepkey =1,$key" "$N";;
+ esac
+ ;;
+ *psk*)
+ wsec_r=1
+ config_get key "$vif" key
+
+ # psk version + default cipher
+ case "$enc" in
+ *mixed*|*psk+psk2*) auth=132; wsec=6;;
+ *psk2*) auth=128; wsec=4;;
+ *) auth=4; wsec=2;;
+ esac
+
+ # cipher override
+ case "$enc" in
+ *tkip+aes*|*tkip+ccmp*|*aes+tkip*|*ccmp+tkip*) wsec=6;;
+ *aes*|*ccmp*) wsec=4;;
+ *tkip*) wsec=2;;
+ esac
+
+ # group rekey interval
+ config_get rekey "$vif" wpa_group_rekey
+
+ eval "${vif}_key=\"\$key\""
+ nasopts="-k \"\$${vif}_key\"${rekey:+ -g $rekey}"
+ ;;
+ *wpa*)
+ local auth_port auth_secret auth_server
+ wsec_r=1
+ eap_r=1
+ config_get auth_server "$vif" auth_server
+ [ -z "$auth_server" ] && config_get auth_server "$vif" server
+ config_get auth_port "$vif" auth_port
+ [ -z "$auth_port" ] && config_get auth_port "$vif" port
+ config_get auth_secret "$vif" auth_secret
+ [ -z "$auth_secret" ] && config_get auth_secret "$vif" key
+
+ # wpa version + default cipher
+ case "$enc" in
+ *mixed*|*wpa+wpa2*) auth=66; wsec=6;;
+ *wpa2*) auth=64; wsec=4;;
+ *) auth=2; wsec=2;;
+ esac
+
+ # cipher override
+ case "$enc" in
+ *tkip+aes*|*tkip+ccmp*|*aes+tkip*|*ccmp+tkip*) wsec=6;;
+ *aes*|*ccmp*) wsec=4;;
+ *tkip*) wsec=2;;
+ esac
+
+ # group rekey interval
+ config_get rekey "$vif" wpa_group_rekey
+
+ eval "${vif}_key=\"\$auth_secret\""
+ nasopts="-r \"\$${vif}_key\" -h $auth_server -p ${auth_port:-1812}${rekey:+ -g $rekey}"
+ ;;
+ esac
+ append vif_do_up "wsec $wsec" "$N"
+ append vif_do_up "wpa_auth $auth" "$N"
+ append vif_do_up "wsec_restrict $wsec_r" "$N"
+ append vif_do_up "eap_restrict $eap_r" "$N"
+
+ local ssid
+ config_get ssid "$vif" ssid
+ append vif_post_up "vlan_mode 0" "$N"
+ append vif_pre_up "ssid $ssid" "$N"
+
+ [ "$mode" = "monitor" ] && {
+ append vif_post_up "monitor $monitor" "$N"
+ }
+
+ [ "$mode" = "adhoc" ] && {
+ local bssid
+ config_get bssid "$vif" bssid
+ [ -n "$bssid" ] && {
+ append vif_pre_up "bssid $bssid" "$N"
+ append vif_pre_up "ibss_merge 0" "$N"
+ } || {
+ append vif_pre_up "ibss_merge 1" "$N"
+ }
+ }
+
+ append vif_post_up "enabled 1" "$N"
+
+ local ifname
+ config_get ifname "$vif" ifname
+ local if_cmd="if_pre_up"
+ [ "$ifname" != "${ifname##${device}-}" ] && if_cmd="if_up"
+ append $if_cmd "macaddr=\$(wlc ifname '$ifname' cur_etheraddr)" ";$N"
+ append $if_cmd "ip link set dev '$ifname' address \$macaddr" ";$N"
+ append if_up "ip link set dev '$ifname' up" ";$N"
+
+ local net_cfg="$(find_net_config "$vif")"
+ [ -z "$net_cfg" ] || {
+ ubus -t 30 wait_for network.interface."$net_cfg"
+ append if_up "set_wifi_up '$vif' '$ifname'" ";$N"
+ append if_up "start_net '$ifname' '$net_cfg'" ";$N"
+ }
+ [ -z "$nas" -o -z "$nasopts" ] || {
+ eval "${vif}_ssid=\"\$ssid\""
+ local nas_mode="-A"
+ [ "$mode" = "sta" ] && nas_mode="-S"
+ [ -z "$nas_cmd" ] && {
+ local pid_file=/var/run/nas.$device.pid
+ nas_cmd="start-stop-daemon -S -b -p $pid_file -x $nas -- -P $pid_file -H 34954"
+ }
+ append nas_cmd "-i $ifname $nas_mode -m $auth -w $wsec -s \"\$${vif}_ssid\" -g 3600 -F $nasopts"
+ }
+ _c=$(($_c + 1))
+ done
+ wlc ifname "$device" stdin <<EOF
+${macaddr:+bssid $macaddr}
+${macaddr:+cur_etheraddr $macaddr}
+band ${band:-0}
+${nmode:+nmode $nmode}
+${nmode:+${nreqd:+nreqd $nreqd}}
+${gmode:+gmode $gmode}
+leddc $leddc
+apsta $apsta
+ap $ap
+${mssid:+mssid $mssid}
+infra $infra
+${wet:+wet 1}
+802.11d 0
+802.11h ${doth:-0}
+wme ${wmm:-1}
+rxant ${rxantenna:-3}
+txant ${txantenna:-3}
+fragthresh ${frag:-2346}
+rtsthresh ${rts:-2347}
+monitor ${monitor:-0}
+
+radio ${radio:-1}
+macfilter ${macfilter:-0}
+maclist ${maclist:-none}
+${wds:+wds $wds}
+country ${country:-US}
+${channel:+channel $channel}
+${chanspec:+chanspec $chanspec}
+maxassoc ${maxassoc:-128}
+slottime ${slottime:--1}
+${frameburst:+frameburst $frameburst}
+
+$vif_pre_up
+EOF
+ eval "$if_pre_up"
+ wlc ifname "$device" stdin <<EOF
+up
+$vif_post_up
+EOF
+ eval "$if_up"
+ wlc ifname "$device" stdin <<EOF
+$vif_do_up
+EOF
+
+ # use vif_txpower (from last wifi-iface) instead of txpower (from
+ # wifi-device) if the latter does not exist
+ txpower=${txpower:-$vif_txpower}
+ [ -z "$txpower" ] || iwconfig $device txpower ${txpower}dBm
+
+ # fd 1000 is an inherited lock file descriptor for preventing concurrent
+ # init script executions. Close it here to prevent the nas daemon from
+ # inheriting it further to avoid holding the lock indefinitely.
+ eval "$nas_cmd 1000>&-"
+}
+
+
+detect_broadcom() {
+ local i=-1
+
+ while grep -qs "^ *wl$((++i)):" /proc/net/dev; do
+ local channel type
+
+ config_get type wl${i} type
+ [ "$type" = broadcom ] && continue
+ channel=`wlc ifname wl${i} channel`
+
+ uci -q batch <<-EOF
+ set wireless.wl${i}=wifi-device
+ set wireless.wl${i}.type=broadcom
+ set wireless.wl${i}.channel=${channel:-11}
+ set wireless.wl${i}.txantenna=3
+ set wireless.wl${i}.rxantenna=3
+ set wireless.wl${i}.disabled=1
+
+ set wireless.default_wl${i}=wifi-iface
+ set wireless.default_wl${i}.device=wl${i}
+ set wireless.default_wl${i}.network=lan
+ set wireless.default_wl${i}.mode=ap
+ set wireless.default_wl${i}.ssid=OpenWrt${i#0}
+ set wireless.default_wl${i}.encryption=none
+EOF
+ uci -q commit wireless
+ done
+}
diff --git a/package/kernel/broadcom-wl/patches/003-compat-2.6.35.patch b/package/kernel/broadcom-wl/patches/003-compat-2.6.35.patch
new file mode 100644
index 0000000..89b6653
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/003-compat-2.6.35.patch
@@ -0,0 +1,39 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -2082,7 +2082,11 @@ static void
+ _wl_set_multicast_list(struct net_device *dev)
+ {
+ wl_info_t *wl;
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,34)
+ struct dev_mc_list *mclist;
++#else
++ struct netdev_hw_addr *ha;
++#endif
+ int i;
+
+ if (!dev)
+@@ -2098,14 +2102,24 @@ _wl_set_multicast_list(struct net_device
+ wl->pub->allmulti = (dev->flags & IFF_ALLMULTI)? TRUE: FALSE;
+
+ /* copy the list of multicasts into our private table */
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,34)
+ for (i = 0, mclist = dev->mc_list; mclist && (i < dev->mc_count);
+ i++, mclist = mclist->next) {
++#else
++ i = 0;
++ netdev_for_each_mc_addr(ha, dev) {
++#endif
+ if (i >= MAXMULTILIST) {
+ wl->pub->allmulti = TRUE;
+ i = 0;
+ break;
+ }
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,34)
+ wl->pub->multicast[i] = *((struct ether_addr*) mclist->dmi_addr);
++#else
++ wl->pub->multicast[i] = *((struct ether_addr*) ha->addr);
++ i++;
++#endif
+ }
+ wl->pub->nmulticast = i;
+ wlc_set(wl->wlc, WLC_SET_PROMISC, (dev->flags & IFF_PROMISC));
diff --git a/package/kernel/broadcom-wl/patches/004-remove-pcmcia.patch b/package/kernel/broadcom-wl/patches/004-remove-pcmcia.patch
new file mode 100644
index 0000000..36dda47
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/004-remove-pcmcia.patch
@@ -0,0 +1,22 @@
+--- a/driver/include/linuxver.h
++++ b/driver/include/linuxver.h
+@@ -111,7 +111,7 @@ typedef irqreturn_t(*FN_ISR) (int irq, v
+ #endif /* not SANDGATE2G */
+ #endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(2, 5, 67) */
+
+-#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
++#if 0
+
+ #include <pcmcia/cs_types.h>
+ #include <pcmcia/cs.h>
+--- a/driver/linux_osl.c
++++ b/driver/linux_osl.c
+@@ -62,7 +62,7 @@ struct osl_info {
+ };
+
+ /* PCMCIA attribute space access macros */
+-#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
++#if 0
+ struct pcmcia_dev {
+ dev_link_t link; /* PCMCIA device pointer */
+ dev_node_t node; /* PCMCIA node structure */
diff --git a/package/kernel/broadcom-wl/patches/005-fix-mem-leak-on-unload.patch b/package/kernel/broadcom-wl/patches/005-fix-mem-leak-on-unload.patch
new file mode 100644
index 0000000..41c246f
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/005-fix-mem-leak-on-unload.patch
@@ -0,0 +1,31 @@
+From: George Kashperko <george@znau.edu.ua>
+
+Release nvram variables buffer.
+Prevent block reserved by alloc_etherdev from being freed.
+Signed-off-by: George Kashperko <george@znau.edu.ua>
+---
+---
+--- a/driver/siutils.c
++++ b/driver/siutils.c
+@@ -647,7 +647,10 @@ si_detach(si_t *sih)
+ #if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SI_BUS)
+ if (sii != &ksii)
+ #endif /* !BCMBUSTYPE || (BCMBUSTYPE == SI_BUS) */
+- MFREE(sii->osh, sii, sizeof(si_info_t));
++ do {
++ MFREE(sii->osh, sii, sizeof(si_info_t));
++ nvram_exit((void *)&(sii->pub));
++ } while (0);
+ }
+
+ void *
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -1477,7 +1477,6 @@ wl_free_if(wl_info_t *wl, wl_if_t *wlif)
+ free_netdev(wlif->dev);
+ #endif
+ }
+- MFREE(wl->osh, wlif, sizeof(wl_if_t));
+ }
+
+ #ifdef AP
diff --git a/package/kernel/broadcom-wl/patches/006-generic-dma-api.patch b/package/kernel/broadcom-wl/patches/006-generic-dma-api.patch
new file mode 100644
index 0000000..d6dd5f0
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/006-generic-dma-api.patch
@@ -0,0 +1,88 @@
+From: George Kashperko <george@znau.edu.ua>
+
+broadcom-wl driver bound to ssb device with ssb driver probe
+have osh handle struct pdev pointer value initialized with
+ssb_device pointer. Later on pdev is used with legacy pci
+dma api as pci_dev thus causing oops sometimes.
+
+The patch replaces legacy pci dma api and pass relevant
+device struct pointer to avoid crashes.
+Signed-off-by: George Kashperko <george@znau.edu.ua>
+---
+ driver/linux_osl.c | 28 +++++++++++++++++++++++-----
+ 1 file changed, 23 insertions(+), 5 deletions(-)
+--- a/driver/linux_osl.c
++++ b/driver/linux_osl.c
+@@ -25,6 +25,9 @@
+ #include <asm/paccess.h>
+ #endif /* mips */
+ #include <pcicfg.h>
++#ifdef CONFIG_SSB
++#include <linux/ssb/ssb.h>
++#endif
+
+ #define PCI_CFG_RETRY 10
+
+@@ -364,12 +367,27 @@ osl_dma_consistent_align(void)
+ return (PAGE_SIZE);
+ }
+
++static struct device *
++osl_get_dmadev(osl_t *osh)
++{
++#ifdef CONFIG_SSB
++ if (osh->bustype == SI_BUS) {
++ /* This can be SiliconBackplane emulated as pci with Broadcom or
++ * ssb device. Less harmful is to check for pci_bus_type and if
++ * no match then assume we got ssb */
++ if (((struct pci_dev *)osh->pdev)->dev.bus != &pci_bus_type)
++ return ((struct ssb_device *)osh->pdev)->dma_dev;
++ }
++#endif
++ return &((struct pci_dev *)osh->pdev)->dev;
++}
++
+ void*
+ osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap)
+ {
+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+
+- return (pci_alloc_consistent(osh->pdev, size, (dma_addr_t*)pap));
++ return (dma_alloc_coherent(osl_get_dmadev(osh), size, (dma_addr_t*)pap, GFP_ATOMIC));
+ }
+
+ void
+@@ -377,7 +395,7 @@ osl_dma_free_consistent(osl_t *osh, void
+ {
+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+
+- pci_free_consistent(osh->pdev, size, va, (dma_addr_t)pa);
++ dma_free_coherent(osl_get_dmadev(osh), size, va, (dma_addr_t)pa);
+ }
+
+ uint BCMFASTPATH
+@@ -386,13 +404,13 @@ osl_dma_map(osl_t *osh, void *va, uint s
+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+
+ if (direction == DMA_TX)
+- return (pci_map_single(osh->pdev, va, size, PCI_DMA_TODEVICE));
++ return (dma_map_single(osl_get_dmadev(osh), va, size, PCI_DMA_TODEVICE));
+ else {
+ #ifdef mips
+ dma_cache_inv((uint)va, size);
+ return (virt_to_phys(va));
+ #else /* mips */
+- return (pci_map_single(osh->pdev, va, size, PCI_DMA_FROMDEVICE));
++ return (dma_map_single(osl_get_dmadev(osh), va, size, PCI_DMA_FROMDEVICE));
+ #endif /* mips */
+ }
+ }
+@@ -404,7 +422,7 @@ osl_dma_unmap(osl_t *osh, uint pa, uint
+
+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
+- pci_unmap_single(osh->pdev, (uint32)pa, size, dir);
++ dma_unmap_single(osl_get_dmadev(osh), (uint32)pa, size, dir);
+ }
+
+
diff --git a/package/kernel/broadcom-wl/patches/007-use-glue-driver.patch b/package/kernel/broadcom-wl/patches/007-use-glue-driver.patch
new file mode 100644
index 0000000..a30dcc4
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/007-use-glue-driver.patch
@@ -0,0 +1,188 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -85,10 +85,9 @@ typedef void wlc_hw_info_t;
+ #include <bcmjtag.h>
+ #endif /* BCMJTAG */
+
+-
+-#ifdef CONFIG_SSB
+-#include <linux/ssb/ssb.h>
+-#endif
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
++#include <wl_glue.h>
++#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+
+ /* Linux wireless extension support */
+ #ifdef CONFIG_WIRELESS_EXT
+@@ -997,62 +996,32 @@ static struct pci_driver wl_pci_driver =
+ #endif /* CONFIG_PCI */
+ #endif
+
++#ifdef BCMJTAG
++static bcmjtag_driver_t wl_jtag_driver = {
++ wl_jtag_probe,
++ wl_jtag_detach,
++ wl_jtag_poll,
++ };
++#endif /* BCMJTAG */
+
+-static int wl_ssb_probe(struct ssb_device *dev, const struct ssb_device_id *id)
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
++static void * glue_attach_cb(u16 vendor, u16 device,
++ ulong mmio, void *dev, u32 irq)
+ {
+- wl_info_t *wl;
+- void *mmio;
+-
+- if (dev->bus->bustype != SSB_BUSTYPE_SSB) {
+- printk("Attaching to SSB behind PCI is not supported. Please remove the b43 ssb bridge\n");
+- return -EINVAL;
+- }
+-
+- mmio = (void *) 0x18000000 + dev->core_index * 0x1000;
+- wl = wl_attach(id->vendor, id->coreid, (ulong) mmio, SI_BUS, dev, dev->irq);
+- if (!wl) {
+- printk("wl_attach failed\n");
+- return -ENODEV;
+- }
+-
+- ssb_set_drvdata(dev, wl);
+-
+- return 0;
++ return wl_attach(vendor, device, mmio, SI_BUS, dev, irq);
+ }
+
+-static void wl_ssb_remove(struct ssb_device *dev)
++static void glue_remove_cb(void *wldev)
+ {
+- wl_info_t *wl = (wl_info_t *) ssb_get_drvdata(dev);
++ wl_info_t *wl = (wl_info_t *)wldev;
+
+ WL_LOCK(wl);
+ WL_APSTA_UPDN(("wl%d (%s): wl_remove() -> wl_down()\n", wl->pub->unit, wl->dev->name));
+ wl_down(wl);
+ WL_UNLOCK(wl);
+ wl_free(wl);
+- ssb_set_drvdata(dev, NULL);
+ }
+-
+-static const struct ssb_device_id wl_ssb_tbl[] = {
+- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, SSB_ANY_REV),
+- SSB_DEVTABLE_END
+-};
+-
+-#ifdef CONFIG_SSB
+-static struct ssb_driver wl_ssb_driver = {
+- .name = KBUILD_MODNAME,
+- .id_table = wl_ssb_tbl,
+- .probe = wl_ssb_probe,
+- .remove = wl_ssb_remove,
+-};
+-#endif
+-
+-#ifdef BCMJTAG
+-static bcmjtag_driver_t wl_jtag_driver = {
+- wl_jtag_probe,
+- wl_jtag_detach,
+- wl_jtag_poll,
+- };
+-#endif /* BCMJTAG */
++#endif/* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+
+
+ /**
+@@ -1067,11 +1036,13 @@ wl_module_init(void)
+ {
+ int error = -ENODEV;
+
+-#ifdef CONFIG_SSB
+- error = ssb_driver_register(&wl_ssb_driver);
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
++ wl_glue_set_attach_callback(&glue_attach_cb);
++ wl_glue_set_remove_callback(&glue_remove_cb);
++ error = wl_glue_register();
+ if (error)
+ return error;
+-#endif /* CONFIG_SSB */
++#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+
+ #ifdef CONFIG_PCI
+ error = pci_register_driver(&wl_pci_driver);
+@@ -1082,7 +1053,11 @@ wl_module_init(void)
+ return 0;
+
+ error_pci:
+- ssb_driver_unregister(&wl_ssb_driver);
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
++ wl_glue_unregister();
++ wl_glue_set_attach_callback(NULL);
++ wl_glue_set_remove_callback(NULL);
++#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+ return error;
+ }
+
+@@ -1099,9 +1074,11 @@ wl_module_exit(void)
+ #ifdef CONFIG_PCI
+ pci_unregister_driver(&wl_pci_driver);
+ #endif /* CONFIG_PCI */
+-#ifdef CONFIG_SSB
+- ssb_driver_unregister(&wl_ssb_driver);
+-#endif /* CONFIG_SSB */
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
++ wl_glue_unregister();
++ wl_glue_set_attach_callback(NULL);
++ wl_glue_set_remove_callback(NULL);
++#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+ }
+
+ module_init(wl_module_init);
+--- a/driver/linux_osl.c
++++ b/driver/linux_osl.c
+@@ -25,9 +25,9 @@
+ #include <asm/paccess.h>
+ #endif /* mips */
+ #include <pcicfg.h>
+-#ifdef CONFIG_SSB
+-#include <linux/ssb/ssb.h>
+-#endif
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
++#include <wl_glue.h>
++#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+
+ #define PCI_CFG_RETRY 10
+
+@@ -370,15 +370,17 @@ osl_dma_consistent_align(void)
+ static struct device *
+ osl_get_dmadev(osl_t *osh)
+ {
+-#ifdef CONFIG_SSB
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
+ if (osh->bustype == SI_BUS) {
+- /* This can be SiliconBackplane emulated as pci with Broadcom or
+- * ssb device. Less harmful is to check for pci_bus_type and if
+- * no match then assume we got ssb */
++ /* This can be SiliconBackplane emulated as pci with Broadcom,
++ * ssb or bcma device. Less harmful is to check for pci_bus_type and if
++ * no match then assume we got either ssb or bcma */
+ if (((struct pci_dev *)osh->pdev)->dev.bus != &pci_bus_type)
+- return ((struct ssb_device *)osh->pdev)->dma_dev;
++ {
++ return wl_glue_get_dmadev(osh->pdev);
++ }
+ }
+-#endif
++#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+ return &((struct pci_dev *)osh->pdev)->dev;
+ }
+
+--- a/driver/Makefile
++++ b/driver/Makefile
+@@ -1,7 +1,7 @@
+ BUILD_TYPE=wl_apsta
+ include $(src)/$(BUILD_TYPE)/buildflags.mk
+
+-EXTRA_CFLAGS += -I$(src)/include -I$(src) -DBCMDRIVER $(WLFLAGS)
++EXTRA_CFLAGS += -I$(src)/include -I$(src) -I$(realpath $(src)/../glue) -DBCMDRIVER $(WLFLAGS)
+
+ wl-objs := $(BUILD_TYPE)/wl_prebuilt.o wl_iw.o wl_linux.o linux_osl.o siutils.o aiutils.o hndpmu.o bcmutils.o sbutils.o nicpci.o hnddma.o bcmsrom.o nvram_stub.o
+
diff --git a/package/kernel/broadcom-wl/patches/008-fix_virtual_interfaces.patch b/package/kernel/broadcom-wl/patches/008-fix_virtual_interfaces.patch
new file mode 100644
index 0000000..23831df
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/008-fix_virtual_interfaces.patch
@@ -0,0 +1,132 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -354,6 +354,7 @@ static int wl_read_proc(char *buffer, ch
+ static int wl_dump(wl_info_t *wl, struct bcmstrbuf *b);
+ #endif /* BCMDBG */
+ struct wl_if *wl_alloc_if(wl_info_t *wl, int iftype, uint unit, struct wlc_if* wlc_if);
++static void wl_link_if(wl_info_t *wl, wl_if_t *wlif);
+ static void wl_free_if(wl_info_t *wl, wl_if_t *wlif);
+
+
+@@ -566,6 +567,9 @@ wl_attach(uint16 vendor, uint16 device,
+ wl->dev = dev;
+ wl_if_setup(dev);
+
++ /* add the interface to the interface linked list */
++ wl_link_if(wl, wlif);
++
+ /* map chip registers (47xx: and sprom) */
+ dev->base_addr = regs;
+
+@@ -1106,10 +1110,14 @@ wl_free(wl_info_t *wl)
+ free_irq(wl->dev->irq, wl);
+ }
+
+- if (wl->dev) {
+- wl_free_if(wl, WL_DEV_IF(wl->dev));
+- wl->dev = NULL;
++ /* free all interfaces */
++ while (wl->if_list) {
++ if ((wl->if_list->dev != wl->dev) || wl->if_list->next == NULL)
++ wl_free_if(wl, wl->if_list);
++ else
++ wl_free_if(wl, wl->if_list->next);
+ }
++ wl->dev = NULL;
+
+ #ifdef TOE
+ wl_toe_detach(wl->toei);
+@@ -1355,10 +1363,12 @@ wl_txflowcontrol(wl_info_t *wl, bool sta
+
+ ASSERT(prio == ALLPRIO);
+ for (wlif = wl->if_list; wlif != NULL; wlif = wlif->next) {
+- if (state == ON)
+- netif_stop_queue(wlif->dev);
+- else
+- netif_wake_queue(wlif->dev);
++ if (wlif->dev_registed) {
++ if (state == ON)
++ netif_stop_queue(wlif->dev);
++ else
++ netif_wake_queue(wlif->dev);
++ }
+ }
+ }
+
+@@ -1398,7 +1408,6 @@ wl_alloc_if(wl_info_t *wl, int iftype, u
+ {
+ struct net_device *dev;
+ wl_if_t *wlif;
+- wl_if_t *p;
+
+ dev = alloc_etherdev(sizeof(wl_if_t));
+ wlif = netdev_priv(dev);
+@@ -1411,9 +1420,13 @@ wl_alloc_if(wl_info_t *wl, int iftype, u
+ wlif->wlcif = wlcif;
+ wlif->subunit = subunit;
+
+- /* match current flow control state */
+- if (iftype != WL_IFTYPE_MON && wl->dev && netif_queue_stopped(wl->dev))
+- netif_stop_queue(dev);
++ return wlif;
++}
++
++static void
++wl_link_if(wl_info_t *wl, wl_if_t *wlif)
++{
++ wl_if_t *p;
+
+ /* add the interface to the interface linked list */
+ if (wl->if_list == NULL)
+@@ -1424,7 +1437,6 @@ wl_alloc_if(wl_info_t *wl, int iftype, u
+ p = p->next;
+ p->next = wlif;
+ }
+- return wlif;
+ }
+
+ static void
+@@ -1504,6 +1516,9 @@ _wl_add_if(wl_task_t *task)
+ wl_info_t *wl = wlif->wl;
+ struct net_device *dev = wlif->dev;
+
++ /* add the interface to the interface linked list */
++ wl_link_if(wl, wlif);
++
+ if (wlif->type == WL_IFTYPE_WDS)
+ dev->netdev_ops = &wl_wds_ops;
+
+@@ -1516,6 +1531,14 @@ _wl_add_if(wl_task_t *task)
+ }
+ wlif->dev_registed = TRUE;
+
++ /* match current flow control state */
++ if (wl->dev) {
++ if (netif_queue_stopped(wl->dev))
++ netif_stop_queue(dev);
++ else
++ netif_wake_queue(dev);
++ }
++
+ done:
+ MFREE(wl->osh, task, sizeof(wl_task_t));
+ atomic_dec(&wl->callbacks);
+@@ -1545,6 +1568,8 @@ wl_add_if(wl_info_t *wl, struct wlc_if*
+ return NULL;
+ }
+
++ wl_if_setup(wlif->dev);
++
+ sprintf(wlif->dev->name, "%s%d.%d", devname, wl->pub->unit, wlif->subunit);
+ if (remote)
+ bcopy(remote, &wlif->remote, ETHER_ADDR_LEN);
+@@ -2778,6 +2803,9 @@ wl_add_monitor(wl_task_t *task)
+ dev = wlif->dev;
+ wl->monitor = dev;
+
++ /* add the interface to the interface linked list */
++ wl_link_if(wl, wlif);
++
+ /* override some fields */
+ sprintf(dev->name, "prism%d", wl->pub->unit);
+ bcopy(wl->dev->dev_addr, dev->dev_addr, ETHER_ADDR_LEN);
diff --git a/package/kernel/broadcom-wl/patches/009-fix_compile_3_2.patch b/package/kernel/broadcom-wl/patches/009-fix_compile_3_2.patch
new file mode 100644
index 0000000..cb388a1
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/009-fix_compile_3_2.patch
@@ -0,0 +1,27 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -463,6 +463,16 @@ wl_schedule_fn(wl_info_t *wl, void (*fn)
+ }
+ #endif /* DSLCPE_DELAY */
+
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 2, 0)
++#define WL_DEFAULT_OPS \
++ .ndo_open = wl_open, \
++ .ndo_stop = wl_close, \
++ .ndo_start_xmit = wl_start, \
++ .ndo_get_stats = wl_get_stats, \
++ .ndo_set_mac_address = wl_set_mac_address, \
++ .ndo_set_rx_mode = wl_set_multicast_list, \
++ .ndo_do_ioctl = wl_ioctl
++#else
+ #define WL_DEFAULT_OPS \
+ .ndo_open = wl_open, \
+ .ndo_stop = wl_close, \
+@@ -471,6 +481,7 @@ wl_schedule_fn(wl_info_t *wl, void (*fn)
+ .ndo_set_mac_address = wl_set_mac_address, \
+ .ndo_set_multicast_list = wl_set_multicast_list, \
+ .ndo_do_ioctl = wl_ioctl
++#endif
+
+ static const struct net_device_ops wl_ops = {
+ WL_DEFAULT_OPS,
diff --git a/package/kernel/broadcom-wl/patches/010-remove_irqf_samble_random.patch b/package/kernel/broadcom-wl/patches/010-remove_irqf_samble_random.patch
new file mode 100644
index 0000000..7b60873
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/010-remove_irqf_samble_random.patch
@@ -0,0 +1,11 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -695,7 +695,7 @@ wl_attach(uint16 vendor, uint16 device,
+ if (wl->bustype != JTAG_BUS)
+ #endif /* BCMJTAG */
+ {
+- if (request_irq(irq, wl_isr, IRQF_SHARED|IRQF_SAMPLE_RANDOM, dev->name, wl)) {
++ if (request_irq(irq, wl_isr, IRQF_SHARED, dev->name, wl)) {
+ WL_ERROR(("wl%d: request_irq() failed\n", unit));
+ goto fail;
+ }
diff --git a/package/kernel/broadcom-wl/patches/011-fix_compile_3_4.patch b/package/kernel/broadcom-wl/patches/011-fix_compile_3_4.patch
new file mode 100644
index 0000000..585d53c
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/011-fix_compile_3_4.patch
@@ -0,0 +1,12 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -49,7 +49,9 @@
+ #include <linux/ieee80211.h>
+ #endif
+
++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0)
+ #include <asm/system.h>
++#endif
+ #include <asm/io.h>
+ #include <asm/irq.h>
+ #include <asm/pgtable.h>
diff --git a/package/kernel/broadcom-wl/patches/012-compat-3.10.patch b/package/kernel/broadcom-wl/patches/012-compat-3.10.patch
new file mode 100644
index 0000000..e36028a
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/012-compat-3.10.patch
@@ -0,0 +1,47 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -349,7 +349,7 @@ static void wl_mic_error(wl_info_t *wl,
+ defined(WL_MONITOR)
+ static int wl_schedule_task(wl_info_t *wl, void (*fn)(struct wl_task *), void *context);
+ #endif
+-#if defined(CONFIG_PROC_FS)
++#if defined(CONFIG_PROC_FS) && (LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0))
+ static int wl_read_proc(char *buffer, char **start, off_t offset, int length, int *eof, void *data);
+ #endif /* defined(CONFIG_PROC_FS) */
+ #ifdef BCMDBG
+@@ -517,7 +517,7 @@ wl_attach(uint16 vendor, uint16 device,
+ struct net_device *dev;
+ wl_if_t *wlif;
+ wl_info_t *wl;
+-#if defined(CONFIG_PROC_FS)
++#if defined(CONFIG_PROC_FS) && (LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0))
+ char tmp[128];
+ #endif
+ osl_t *osh;
+@@ -664,7 +664,7 @@ wl_attach(uint16 vendor, uint16 device,
+ WL_ERROR(("wl%d: Error setting MPC variable to 0\n", unit));
+ }
+ }
+-#if defined(CONFIG_PROC_FS)
++#if defined(CONFIG_PROC_FS) && (LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0))
+ /* create /proc/net/wl<unit> */
+ sprintf(tmp, "net/wl%d", wl->pub->unit);
+ create_proc_read_entry(tmp, 0, 0, wl_read_proc, (void*)wl);
+@@ -810,7 +810,7 @@ wl_dbus_disconnect_cb(void *arg)
+ }
+ #endif /* BCMDBUS */
+
+-#if defined(CONFIG_PROC_FS)
++#if defined(CONFIG_PROC_FS) && (LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0))
+ static int
+ wl_read_proc(char *buffer, char **start, off_t offset, int length, int *eof, void *data)
+ {
+@@ -1149,7 +1149,7 @@ wl_free(wl_info_t *wl)
+
+ /* free common resources */
+ if (wl->wlc) {
+-#if defined(CONFIG_PROC_FS)
++#if defined(CONFIG_PROC_FS) && (LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0))
+ char tmp[128];
+ /* remove /proc/net/wl<unit> */
+ sprintf(tmp, "net/wl%d", wl->pub->unit);
diff --git a/package/kernel/broadcom-wl/patches/013-interface-name.patch b/package/kernel/broadcom-wl/patches/013-interface-name.patch
new file mode 100644
index 0000000..dbe1bdb
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/013-interface-name.patch
@@ -0,0 +1,11 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -1583,7 +1583,7 @@ wl_add_if(wl_info_t *wl, struct wlc_if*
+
+ wl_if_setup(wlif->dev);
+
+- sprintf(wlif->dev->name, "%s%d.%d", devname, wl->pub->unit, wlif->subunit);
++ sprintf(wlif->dev->name, "%s%d-%d", devname, wl->pub->unit, wlif->subunit);
+ if (remote)
+ bcopy(remote, &wlif->remote, ETHER_ADDR_LEN);
+
diff --git a/package/kernel/broadcom-wl/patches/014-fix-band-reporting.patch b/package/kernel/broadcom-wl/patches/014-fix-band-reporting.patch
new file mode 100644
index 0000000..b231fed
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/014-fix-band-reporting.patch
@@ -0,0 +1,41 @@
+--- a/driver/wl_iw.c
++++ b/driver/wl_iw.c
+@@ -314,7 +314,7 @@ wl_iw_get_name(
+ )
+ {
+ int phytype, err;
+- uint band[3];
++ uint i, band[3], bands;
+ char cap[5];
+
+ WL_TRACE(("%s: SIOCGIWNAME\n", dev->name));
+@@ -335,16 +335,20 @@ wl_iw_get_name(
+ break;
+ case WLC_PHY_TYPE_LP:
+ case WLC_PHY_TYPE_G:
+- if (band[0] >= 2)
+- strcpy(cap, "abg");
+- else
+- strcpy(cap, "bg");
+- break;
+ case WLC_PHY_TYPE_N:
+- if (band[0] >= 2)
+- strcpy(cap, "abgn");
+- else
+- strcpy(cap, "bgn");
++ bands = 0;
++ for (i = 1; i <= band[0]; i++) {
++ bands |= dtoh32(band[i]);
++ }
++ strcpy(cap, "");
++ if (bands & WLC_BAND_5G)
++ strcat(cap, "a");
++ if (bands & WLC_BAND_2G)
++ strcat(cap, "bg");
++ if (phytype == WLC_PHY_TYPE_N)
++ strcat(cap, "n");
++ break;
++ default:
+ break;
+ }
+ done:
diff --git a/package/kernel/broadcom-wl/patches/015-support-probe-of-wds-interfaces.patch b/package/kernel/broadcom-wl/patches/015-support-probe-of-wds-interfaces.patch
new file mode 100644
index 0000000..f44921a
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/015-support-probe-of-wds-interfaces.patch
@@ -0,0 +1,11 @@
+--- a/shared/wl.c
++++ b/shared/wl.c
+@@ -27,7 +27,7 @@ wl_probe(char *name)
+ {
+ int ret, val;
+
+- if ((name[0] != 'w') || (name[1] != 'l'))
++ if ((name[0] != 'w') || ((name[1] != 'l') && ((name[1] != 'd') || (name[2] != 's'))))
+ return -1;
+
+ /* Check interface */
diff --git a/package/kernel/broadcom-wl/patches/020-musl-fixes.patch b/package/kernel/broadcom-wl/patches/020-musl-fixes.patch
new file mode 100644
index 0000000..a985b9c
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/020-musl-fixes.patch
@@ -0,0 +1,75 @@
+--- a/shared/wl_linux.c
++++ b/shared/wl_linux.c
+@@ -13,6 +13,7 @@
+ */
+
+ #include <stdio.h>
++#include <stdint.h>
+ #include <unistd.h>
+ #include <string.h>
+ #include <errno.h>
+@@ -20,10 +21,10 @@
+ #include <net/if.h>
+ #include <linux/types.h>
+
+-typedef u_int64_t u64;
+-typedef u_int32_t u32;
+-typedef u_int16_t u16;
+-typedef u_int8_t u8;
++typedef uint64_t u64;
++typedef uint32_t u32;
++typedef uint16_t u16;
++typedef uint8_t u8;
+ #include <linux/sockios.h>
+ #include <linux/ethtool.h>
+
+--- a/shared/linux_timer.c
++++ b/shared/linux_timer.c
+@@ -125,7 +125,7 @@ void unblock_timer();
+
+ static struct event *event_queue = NULL;
+ static struct event *event_freelist;
+-static uint g_granularity;
++static unsigned int g_granularity;
+ static int g_maxevents = 0;
+
+ uclock_t uclock()
+--- a/shared/wl.c
++++ b/shared/wl.c
+@@ -14,6 +14,7 @@
+ #include <typedefs.h>
+ #include <string.h>
+ #include <stdio.h>
++#include <stdlib.h>
+ #include <unistd.h>
+ #include <errno.h>
+ #include <sys/ioctl.h>
+@@ -263,3 +264,28 @@ wl_printlasterror(char *name)
+ fprintf(stderr, err_buf);
+ }
+ */
++
++static int in_assert; /* bss inits to 0. */
++
++void __assert(const char *assertion, const char * filename,
++ unsigned int linenumber, register const char * function)
++{
++ if (!in_assert) {
++ in_assert = 1;
++
++ fprintf(stderr,
++#ifdef ASSERT_SHOW_PROGNAME
++ "%s: %s: %d: %s: Assertion `%s' failed.\n", __uclibc_progname,
++#else
++ "%s: %d: %s: Assertion `%s' failed.\n",
++#endif
++ filename,
++ linenumber,
++ /* Function name isn't available with some compilers. */
++ ((function == NULL) ? "?function?" : function),
++ assertion
++ );
++ }
++ /* shouldn't we? fflush(stderr); */
++ abort();
++}
diff --git a/package/kernel/broadcom-wl/patches/030-remove_devinit_devexit.patch b/package/kernel/broadcom-wl/patches/030-remove_devinit_devexit.patch
new file mode 100644
index 0000000..ead108e
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/030-remove_devinit_devexit.patch
@@ -0,0 +1,74 @@
+--- a/driver/include/linuxver.h
++++ b/driver/include/linuxver.h
+@@ -139,22 +139,6 @@ typedef struct pcmcia_device dev_link_t;
+
+ #endif /* CONFIG_PCMCIA */
+
+-#ifndef __exit
+-#define __exit
+-#endif
+-#ifndef __devexit
+-#define __devexit
+-#endif
+-#ifndef __devinit
+-#define __devinit __init
+-#endif
+-#ifndef __devinitdata
+-#define __devinitdata
+-#endif
+-#ifndef __devexit_p
+-#define __devexit_p(x) x
+-#endif
+-
+ #if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 0))
+
+ #define pci_get_drvdata(dev) (dev)->sysdata
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -854,7 +854,7 @@ wl_read_proc(char *buffer, char **start,
+ */
+ #if !defined(BCMJTAG)
+ #ifdef CONFIG_PCI
+-static void __devexit wl_remove(struct pci_dev *pdev);
++static void wl_remove(struct pci_dev *pdev);
+ /**
+ * determines if a device is a WL device, and if so, attaches it.
+ *
+@@ -862,7 +862,7 @@ static void __devexit wl_remove(struct p
+ * and if so, performs a wl_attach() on it.
+ *
+ */
+-int __devinit
++int
+ wl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+ {
+ int rc;
+@@ -976,7 +976,7 @@ wl_resume(struct pci_dev *pdev)
+ }
+ #endif /* LINUXSTA_PS */
+
+-static void __devexit
++static void
+ wl_remove(struct pci_dev *pdev)
+ {
+ wl_info_t *wl = (wl_info_t *) pci_get_drvdata(pdev);
+@@ -1007,7 +1007,7 @@ static struct pci_driver wl_pci_driver =
+ suspend: wl_suspend,
+ resume: wl_resume,
+ #endif /* LINUXSTA_PS */
+- remove: __devexit_p(wl_remove),
++ remove: wl_remove,
+ id_table: wl_id_table,
+ };
+ #endif /* CONFIG_PCI */
+--- a/driver/wl_linux.h
++++ b/driver/wl_linux.h
+@@ -33,7 +33,7 @@ extern irqreturn_t wl_isr(int irq, void
+ extern irqreturn_t wl_isr(int irq, void *dev_id, struct pt_regs *ptregs);
+ #endif
+
+-extern int __devinit wl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
++extern int wl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
+ extern void wl_free(wl_info_t *wl);
+ extern int wl_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
+ extern struct net_device * wl_netdev_get(wl_info_t *wl);
diff --git a/package/kernel/broadcom-wl/patches/040-remove_last_rx_usage.patch b/package/kernel/broadcom-wl/patches/040-remove_last_rx_usage.patch
new file mode 100644
index 0000000..9f4b0b0
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/040-remove_last_rx_usage.patch
@@ -0,0 +1,10 @@
+--- broadcom-wl-5.10.56.27.3/driver/wl_linux.c.orig 2018-01-13 18:25:14.944667645 +0100
++++ broadcom-wl-5.10.56.27.3/driver/wl_linux.c 2018-01-13 18:25:25.836667888 +0100
+@@ -2762,7 +2762,6 @@
+ bcopy(oskb->data + D11_PHY_HDR_LEN, pdata, oskb->len - D11_PHY_HDR_LEN);
+
+ skb->dev = wl->monitor;
+- skb->dev->last_rx = jiffies;
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 22)
+ skb_reset_mac_header(skb);
+ #else
diff --git a/package/kernel/broadcom-wl/patches/100-fix_nvram_two_devices.patch b/package/kernel/broadcom-wl/patches/100-fix_nvram_two_devices.patch
new file mode 100644
index 0000000..6cf6fae
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/100-fix_nvram_two_devices.patch
@@ -0,0 +1,32 @@
+--- a/driver/nvram_stub.c
++++ b/driver/nvram_stub.c
+@@ -22,6 +22,7 @@ typedef struct _vars {
+ #define VARS_T_OH sizeof(vars_t)
+
+ static vars_t *vars = NULL;
++static int nvram_init_done = 0;
+ extern char *nvram_buf[];
+
+ int
+@@ -33,6 +34,10 @@ BCMATTACHFN(nvram_init)(void *si)
+ uint nvs, bufsz;
+ vars_t *new;
+
++ nvram_init_done++;
++ if (nvram_init_done != 1)
++ return 0;
++
+ osh = si_osh(sih);
+
+ nvs = R_REG(osh, &nvh->len) - sizeof(struct nvram_header);
+@@ -79,6 +84,10 @@ BCMATTACHFN(nvram_exit)(void *si)
+ vars_t *this, *next;
+ si_t *sih;
+
++ nvram_init_done--;
++ if (nvram_init_done != 0)
++ return;
++
+ sih = (si_t *)si;
+ this = vars;
+ while (this) {
diff --git a/package/kernel/broadcom-wl/patches/110-add_number_to_dev_name.patch b/package/kernel/broadcom-wl/patches/110-add_number_to_dev_name.patch
new file mode 100644
index 0000000..95f0beb
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/110-add_number_to_dev_name.patch
@@ -0,0 +1,11 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -1425,7 +1425,7 @@ wl_alloc_if(wl_info_t *wl, int iftype, u
+ dev = alloc_etherdev(sizeof(wl_if_t));
+ wlif = netdev_priv(dev);
+ bzero(wlif, sizeof(wl_if_t));
+- strncpy(dev->name, name, IFNAMSIZ);
++ snprintf(dev->name, IFNAMSIZ, name, subunit);
+
+ wlif->type = iftype;
+ wlif->dev = dev;
diff --git a/package/kernel/broadcom-wl/patches/120-fixup-mac-addresses.patch b/package/kernel/broadcom-wl/patches/120-fixup-mac-addresses.patch
new file mode 100644
index 0000000..422f7f7
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/120-fixup-mac-addresses.patch
@@ -0,0 +1,93 @@
+--- a/driver/nvram_stub.c
++++ b/driver/nvram_stub.c
+@@ -5,6 +5,8 @@
+ #include <siutils.h>
+ #include <bcmendian.h>
+ #include <bcmnvram.h>
++#include <proto/ethernet.h>
++#include <linux/errno.h>
+
+ #ifdef BCMDBG_ERR
+ #define NVR_MSG(x) printf x
+@@ -24,6 +26,7 @@ typedef struct _vars {
+ static vars_t *vars = NULL;
+ static int nvram_init_done = 0;
+ extern char *nvram_buf[];
++static void fixup_mac_addr(vars_t *new);
+
+ int
+ BCMATTACHFN(nvram_init)(void *si)
+@@ -55,6 +58,7 @@ BCMATTACHFN(nvram_init)(void *si)
+ vars = new;
+
+ bcopy((char *)(&nvh[1]), new->vars, nvs);
++ fixup_mac_addr(new);
+ return 0;
+ }
+
+@@ -164,3 +168,65 @@ nvram_getall(char *buf, int count)
+ *buf = '\0';
+ return 0;
+ }
++
++static bool nvram_is_valid_mac(struct ether_addr *mac)
++{
++ return mac && !(mac->octet[0] == 0x00 && mac->octet[1] == 0x90 && mac->octet[2] == 0x4c);
++}
++
++static int nvram_increase_mac_addr(struct ether_addr *mac, u8 num)
++{
++ u8 *oui = mac->octet + ETHER_ADDR_LEN/2 - 1;
++ u8 *p = mac->octet + ETHER_ADDR_LEN - 1;
++
++ do {
++ (*p) += num;
++ if (*p > num)
++ break;
++ p--;
++ num = 1;
++ } while (p != oui);
++
++ if (p == oui) {
++ pr_err("unable to fetch mac address\n");
++ return -ENOENT;
++ }
++ return 0;
++}
++
++static void nvram_change_mac_addr(vars_t *new, struct ether_addr *valid, const char *name)
++{
++ char *macaddr_c;
++ struct ether_addr macaddr;
++
++ macaddr_c = findvar(new->vars, new->vars + new->size, name);
++ if (!macaddr_c)
++ return;
++
++ bcm_ether_atoe(macaddr_c, &macaddr);
++ if (nvram_is_valid_mac(&macaddr))
++ return;
++ nvram_increase_mac_addr(valid, 1);
++ bcm_ether_ntoa(valid, macaddr_c);
++}
++
++static void fixup_mac_addr(vars_t *new)
++{
++ char *macaddr_base_c;
++ struct ether_addr macaddr_base;
++
++ macaddr_base_c = findvar(new->vars, new->vars + new->size, "et0macaddr");
++ if (!macaddr_base_c)
++ return;
++
++ bcm_ether_atoe(macaddr_base_c, &macaddr_base);
++ if (!nvram_is_valid_mac(&macaddr_base))
++ return;
++
++ /* jump over the first free address so it can be used for wan */
++ nvram_increase_mac_addr(&macaddr_base, 1);
++ nvram_change_mac_addr(new, &macaddr_base, "sb/1/macaddr");
++ nvram_change_mac_addr(new, &macaddr_base, "pci/1/1/macaddr");
++ nvram_change_mac_addr(new, &macaddr_base, "pci/1/2/macaddr");
++ nvram_change_mac_addr(new, &macaddr_base, "pci/2/1/macaddr");
++}
diff --git a/package/kernel/broadcom-wl/patches/200-add_bcm_a8xx_support.patch b/package/kernel/broadcom-wl/patches/200-add_bcm_a8xx_support.patch
new file mode 100644
index 0000000..c1d1344
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/200-add_bcm_a8xx_support.patch
@@ -0,0 +1,12 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -876,7 +876,8 @@ wl_pci_probe(struct pci_dev *pdev, const
+
+ if ((pdev->vendor != PCI_VENDOR_ID_BROADCOM) ||
+ (((pdev->device & 0xff00) != 0x4300) &&
+- ((pdev->device & 0xff00) != 0x4700)))
++ ((pdev->device & 0xff00) != 0x4700) &&
++ ((pdev->device & 0xff00) != 0xa800)))
+ return (-ENODEV);
+
+ rc = pci_enable_device(pdev);
diff --git a/package/kernel/broadcom-wl/patches/910-fallback-sprom.patch b/package/kernel/broadcom-wl/patches/910-fallback-sprom.patch
new file mode 100644
index 0000000..a85e40b
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/910-fallback-sprom.patch
@@ -0,0 +1,78 @@
+--- a/driver/bcmsrom.c
++++ b/driver/bcmsrom.c
+@@ -39,6 +39,11 @@
+ #include <sbsdpcmdev.h>
+ #endif
+
++#if defined(CONFIG_SSB_PCIHOST) && defined(CONFIG_BOARD_BCM963XX)
++#include <linux/ssb/ssb.h>
++extern int bcm63xx_get_fallback_sprom(uint pci_bus, uint pci_slot, struct ssb_sprom *out);
++#endif
++
+ #ifdef WLTEST
+ #include <sbsprom.h>
+ #endif /* WLTEST */
+@@ -2120,6 +2125,63 @@ BCMATTACHFN(initvars_srom_pci)(si_t *sih
+ goto varscont;
+ }
+
++#if defined(CONFIG_SSB_PCIHOST) && defined(CONFIG_BOARD_BCM963XX)
++ base = vp = MALLOC(osh, MAXSZ_NVRAM_VARS);
++
++ if( base != NULL )
++ {
++ char eabuf[18];
++ struct ssb_sprom bcm63xx_sprom;
++ uint pci_bus = osl_pci_bus(osh), pci_slot = osl_pci_slot(osh);
++
++ bcm63xx_get_fallback_sprom(pci_bus, pci_slot, &bcm63xx_sprom);
++ printk("BCM%X(%02x:%02x) using sprom version %i\n", sih->chip, pci_bus, pci_slot, bcm63xx_sprom.revision);
++
++ varbuf_init(&b, base, MAXSZ_NVRAM_VARS);
++
++ varbuf_append(&b, vstr_sromrev, bcm63xx_sprom.revision);
++ varbuf_append(&b, vstr_boardrev, bcm63xx_sprom.board_rev);
++
++ /* ToDo: map bcm63xx_sprom.country_code */
++ varbuf_append(&b, vstr_noccode);
++
++ varbuf_append(&b, vstr_aa2g, bcm63xx_sprom.ant_available_bg);
++
++ varbuf_append(&b, vstr_pa0b[0], bcm63xx_sprom.pa0b0);
++ varbuf_append(&b, vstr_pa1b[0], bcm63xx_sprom.pa1b0);
++ varbuf_append(&b, vstr_pa0b[1], bcm63xx_sprom.pa0b1);
++ varbuf_append(&b, vstr_pa1b[1], bcm63xx_sprom.pa1b1);
++ varbuf_append(&b, vstr_pa0b[2], bcm63xx_sprom.pa0b2);
++ varbuf_append(&b, vstr_pa1b[2], bcm63xx_sprom.pa1b2);
++
++ varbuf_append(&b, vstr_pa0maxpwr, bcm63xx_sprom.maxpwr_bg);
++ varbuf_append(&b, vstr_pa0itssit, bcm63xx_sprom.itssi_bg);
++
++ varbuf_append(&b, vstr_boardflags, (bcm63xx_sprom.boardflags_hi << 16) | bcm63xx_sprom.boardflags_lo);
++ varbuf_append(&b, vstr_boardflags2, (bcm63xx_sprom.boardflags2_hi << 16) | bcm63xx_sprom.boardflags2_lo);
++
++ snprintf(eabuf, sizeof(eabuf), "%02x:%02x:%02x:%02x:%02x:%02x",
++ bcm63xx_sprom.il0mac[0], bcm63xx_sprom.il0mac[1], bcm63xx_sprom.il0mac[2],
++ bcm63xx_sprom.il0mac[3], bcm63xx_sprom.il0mac[4], bcm63xx_sprom.il0mac[5]
++ );
++
++ varbuf_append(&b, vstr_macaddr, eabuf);
++
++ /* final nullbyte terminator */
++ ASSERT(b.size >= 1);
++ vp = b.buf;
++ *vp++ = '\0';
++
++ ASSERT((vp - base) <= MAXSZ_NVRAM_VARS);
++ goto varsdone;
++ }
++ else
++ {
++ err = -2;
++ goto errout;
++ }
++#endif
++
+ BS_ERROR(("SROM CRC Error\n"));
+
+ #if defined(WLTEST)
diff --git a/package/kernel/broadcom-wl/patches/912-pci-bus-nvram-hack.patch b/package/kernel/broadcom-wl/patches/912-pci-bus-nvram-hack.patch
new file mode 100644
index 0000000..65e8bd3
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/912-pci-bus-nvram-hack.patch
@@ -0,0 +1,11 @@
+--- a/driver/siutils.c
++++ b/driver/siutils.c
+@@ -1859,7 +1859,7 @@ BCMINITFN(si_devpath)(si_t *sih, char *p
+ case PCI_BUS:
+ ASSERT((SI_INFO(sih))->osh != NULL);
+ slen = snprintf(path, (size_t)size, "pci/%u/%u/",
+- OSL_PCI_BUS((SI_INFO(sih))->osh),
++ OSL_PCI_BUS((SI_INFO(sih))->osh) + 1,
+ OSL_PCI_SLOT((SI_INFO(sih))->osh));
+ break;
+ case PCMCIA_BUS:
diff --git a/package/kernel/broadcom-wl/patches/913-avoid-dbe-on-ifs_ctl-readw-hack.patch b/package/kernel/broadcom-wl/patches/913-avoid-dbe-on-ifs_ctl-readw-hack.patch
new file mode 100644
index 0000000..412bce9
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/913-avoid-dbe-on-ifs_ctl-readw-hack.patch
@@ -0,0 +1,12 @@
+--- a/driver/linux_osl.c
++++ b/driver/linux_osl.c
+@@ -723,6 +723,9 @@ osl_readl(volatile uint32 *r)
+ uint16
+ osl_readw(volatile uint16 *r)
+ {
++ uint32 addr = (uintptr)r & 0xffff3fff;
++ if (addr == 0xa8000688) /* ifs_ctl */
++ readl(r);
+ return (readw(r));
+ }
+
diff --git a/package/kernel/broadcom-wl/patches/914-eliminate-date-time-error.patch b/package/kernel/broadcom-wl/patches/914-eliminate-date-time-error.patch
new file mode 100644
index 0000000..394a06d
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/914-eliminate-date-time-error.patch
@@ -0,0 +1,21 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -762,7 +762,7 @@ wl_attach(uint16 vendor, uint16 device,
+ dev->name, device);
+
+ #ifdef BCMDBG
+- printf(" (Compiled in " SRCBASE " at " __TIME__ " on " __DATE__ ")");
++ printf(" (Compiled in " SRCBASE ")");
+ #endif /* BCMDBG */
+ printf("\n");
+
+@@ -2298,8 +2298,7 @@ wl_sendup(wl_info_t *wl, wl_if_t *wlif,
+ void
+ wl_dump_ver(wl_info_t *wl, struct bcmstrbuf *b)
+ {
+- bcm_bprintf(b, "wl%d: %s %s version %s\n", wl->pub->unit,
+- __DATE__, __TIME__, EPI_VERSION_STR);
++ bcm_bprintf(b, "wl%d: version %s\n", wl->pub->unit, EPI_VERSION_STR);
+ }
+
+ #ifdef BCMDBG
diff --git a/package/kernel/broadcom-wl/patches/915-fix-wl_timer-for-4_15.patch b/package/kernel/broadcom-wl/patches/915-fix-wl_timer-for-4_15.patch
new file mode 100644
index 0000000..daf3160
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/915-fix-wl_timer-for-4_15.patch
@@ -0,0 +1,55 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -235,7 +235,11 @@
+
+ };
+
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 15, 0)
++static void wl_timer(struct timer_list *tl);
++#else
+ static void wl_timer(ulong data);
++#endif
+ static void _wl_timer(wl_timer_t *t);
+
+ #ifdef WLC_HIGH_ONLY
+@@ -2512,6 +2517,18 @@
+ }
+ #endif /* WLC_HIGH_ONLY */
+
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 15, 0)
++static void
++wl_timer(struct timer_list *tl)
++{
++ wl_timer_t *t = from_timer(t, tl, timer);
++#ifndef WLC_HIGH_ONLY
++ _wl_timer(t);
++#else
++ wl_schedule_task(t->wl, wl_timer_task, t);
++#endif /* WLC_HIGH_ONLY */
++}
++#else
+ static void
+ wl_timer(ulong data)
+ {
+@@ -2522,6 +2539,7 @@
+ wl_schedule_task(t->wl, wl_timer_task, t);
+ #endif /* WLC_HIGH_ONLY */
+ }
++#endif /* linux >= 4.15.0 */
+
+ static void
+ _wl_timer(wl_timer_t *t)
+@@ -2573,9 +2591,13 @@
+
+ bzero(t, sizeof(wl_timer_t));
+
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 15, 0)
++ timer_setup(&t->timer, wl_timer, 0);
++#else
+ init_timer(&t->timer);
+ t->timer.data = (ulong) t;
+ t->timer.function = wl_timer;
++#endif
+ t->wl = wl;
+ t->fn = fn;
+ t->arg = arg;
diff --git a/package/kernel/broadcom-wl/patches/916-fix-compilation-for-5_4.patch b/package/kernel/broadcom-wl/patches/916-fix-compilation-for-5_4.patch
new file mode 100644
index 0000000..bc7b63d
--- /dev/null
+++ b/package/kernel/broadcom-wl/patches/916-fix-compilation-for-5_4.patch
@@ -0,0 +1,18 @@
+--- a/driver/wl_iw.c
++++ b/driver/wl_iw.c
+@@ -112,10 +112,14 @@
+ ifr.ifr_data = (caddr_t) &ioc;
+
+ /* Must be up for virtually all useful ioctls */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 0, 0)
++ dev_open(dev, NULL);
++#else
+ dev_open(dev);
++#endif
+
+ fs = get_fs();
+- set_fs(get_ds());
++ set_fs(KERNEL_DS);
+ ret = dev->netdev_ops->ndo_do_ioctl(dev, &ifr, SIOCDEVPRIVATE);
+ set_fs(fs);
+
diff --git a/package/kernel/broadcom-wl/src/glue/Makefile b/package/kernel/broadcom-wl/src/glue/Makefile
new file mode 100644
index 0000000..f434d24
--- /dev/null
+++ b/package/kernel/broadcom-wl/src/glue/Makefile
@@ -0,0 +1,17 @@
+#
+# Makefile for wl_glue driver
+#
+# Copyright (C) 2011 Jo-Philipp Wich <jo@mein.io>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version
+# 2 of the License, or (at your option) any later version.
+#
+
+obj-m := wl_glue.o
+
+ifeq ($(MAKING_MODULES),1)
+-include $(TOPDIR)/Rules.make
+endif
+
diff --git a/package/kernel/broadcom-wl/src/glue/wl_glue.c b/package/kernel/broadcom-wl/src/glue/wl_glue.c
new file mode 100644
index 0000000..7851f41
--- /dev/null
+++ b/package/kernel/broadcom-wl/src/glue/wl_glue.c
@@ -0,0 +1,315 @@
+/*
+ * wl_glue.c: Broadcom WL support module providing a unified SSB/BCMA handling.
+ * Copyright (C) 2011 Jo-Philipp Wich <jo@mein.io>
+ */
+
+#include "wl_glue.h"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#ifdef CONFIG_BCM47XX
+#include <bcm47xx.h>
+#endif
+
+#ifdef CONFIG_SSB
+#include <linux/ssb/ssb.h>
+#endif
+
+#ifdef CONFIG_BCMA
+#include <linux/bcma/bcma.h>
+#endif
+
+MODULE_AUTHOR("Jo-Philipp Wich (jo@mein.io)");
+MODULE_DESCRIPTION("Broadcom WL SSB/BCMA compatibility layer");
+MODULE_LICENSE("GPL");
+
+static wl_glue_attach_cb_t attach_cb = NULL;
+static wl_glue_remove_cb_t remove_cb = NULL;
+static enum wl_glue_bus_type active_bus_type = WL_GLUE_BUS_TYPE_UNSPEC;
+static int wl_glue_attached = 0;
+
+
+#ifdef CONFIG_SSB
+static int wl_glue_ssb_probe(struct ssb_device *dev, const struct ssb_device_id *id)
+{
+ void *mmio;
+ void *wldev;
+
+ if (!attach_cb)
+ {
+ pr_err("No attach callback registered\n");
+ return -ENOSYS;
+ }
+
+ if (dev->bus->bustype != SSB_BUSTYPE_SSB)
+ {
+ pr_err("Attaching to SSB behind PCI is not supported. Please remove the b43 ssb bridge\n");
+ return -EINVAL;
+ }
+
+ mmio = (void *) 0x18000000 + dev->core_index * 0x1000;
+ wldev = attach_cb(id->vendor, id->coreid, (ulong)mmio, dev, dev->irq);
+
+ if (!wldev)
+ {
+ pr_err("The attach callback failed, SSB probe aborted\n");
+ return -ENODEV;
+ }
+
+ ssb_set_drvdata(dev, wldev);
+ return 0;
+}
+
+static void wl_glue_ssb_remove(struct ssb_device *dev)
+{
+ void *wldev = ssb_get_drvdata(dev);
+
+ if (remove_cb)
+ remove_cb(wldev);
+
+ ssb_set_drvdata(dev, NULL);
+}
+
+static const struct ssb_device_id wl_glue_ssb_tbl[] = {
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, SSB_ANY_REV),
+ {},
+};
+
+static struct ssb_driver wl_glue_ssb_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = wl_glue_ssb_tbl,
+ .probe = wl_glue_ssb_probe,
+ .remove = wl_glue_ssb_remove,
+};
+#endif /* CONFIG_SSB */
+
+#ifdef CONFIG_BCMA
+static int wl_glue_bcma_probe(struct bcma_device *dev)
+{
+ void *wldev;
+
+ if (!attach_cb)
+ {
+ pr_err("No attach callback registered\n");
+ return -ENOSYS;
+ }
+
+ if (dev->bus->hosttype != BCMA_HOSTTYPE_SOC)
+ {
+ pr_err("Unsupported BCMA bus type %d\n", dev->bus->hosttype);
+ return -EINVAL;
+ }
+
+ /*
+ * NB:
+ * 0x18000000 = BCMA_ADDR_BASE
+ * 0x1000 = BCMA_CORE_SIZE
+ */
+
+ wldev = attach_cb(dev->id.manuf, dev->id.id, (ulong)dev->addr, dev, dev->irq);
+
+ if (!wldev)
+ {
+ pr_err("The attach callback failed, BCMA probe aborted\n");
+ return -ENODEV;
+ }
+
+ bcma_set_drvdata(dev, wldev);
+ return 0;
+}
+
+static void wl_glue_bcma_remove(struct bcma_device *dev)
+{
+ void *wldev = bcma_get_drvdata(dev);
+
+ if (remove_cb)
+ remove_cb(wldev);
+
+ bcma_set_drvdata(dev, NULL);
+}
+
+static const struct bcma_device_id wl_glue_bcma_tbl[] = {
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, BCMA_ANY_REV, BCMA_ANY_CLASS),
+ {},
+};
+
+static struct bcma_driver wl_glue_bcma_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = wl_glue_bcma_tbl,
+ .probe = wl_glue_bcma_probe,
+ .remove = wl_glue_bcma_remove,
+};
+#endif /* CONFIG_BCMA */
+
+
+void wl_glue_set_attach_callback(wl_glue_attach_cb_t cb)
+{
+ attach_cb = cb;
+}
+EXPORT_SYMBOL(wl_glue_set_attach_callback);
+
+void wl_glue_set_remove_callback(wl_glue_remove_cb_t cb)
+{
+ remove_cb = cb;
+}
+EXPORT_SYMBOL(wl_glue_set_remove_callback);
+
+int wl_glue_register(void)
+{
+ int err;
+
+ switch(active_bus_type)
+ {
+#ifdef CONFIG_SSB
+ case WL_GLUE_BUS_TYPE_SSB:
+ err = ssb_driver_register(&wl_glue_ssb_driver);
+ break;
+#endif /* CONFIG_SSB */
+
+#ifdef CONFIG_BCMA
+ case WL_GLUE_BUS_TYPE_BCMA:
+ err = bcma_driver_register(&wl_glue_bcma_driver);
+ break;
+#endif /* CONFIG_BCMA */
+
+ default:
+ pr_err("Not attaching through glue driver due to unsupported bus\n");
+ err = -ENOSYS;
+ break;
+ }
+
+ if (!err)
+ {
+ pr_info("SSB/BCMA glue driver successfully attached\n");
+ wl_glue_attached = 1;
+ }
+
+ return err;
+}
+EXPORT_SYMBOL(wl_glue_register);
+
+int wl_glue_unregister(void)
+{
+ int err;
+
+ if (!wl_glue_attached)
+ return -ENOSYS;
+
+ switch (active_bus_type)
+ {
+#ifdef CONFIG_SSB
+ case WL_GLUE_BUS_TYPE_SSB:
+ ssb_driver_unregister(&wl_glue_ssb_driver);
+ err = 0;
+ break;
+#endif /* CONFIG_SSB */
+
+#ifdef CONFIG_BCMA
+ case WL_GLUE_BUS_TYPE_BCMA:
+ bcma_driver_unregister(&wl_glue_bcma_driver);
+ err = 0;
+ break;
+#endif /* CONFIG_BCMA */
+
+ default:
+ pr_err("Not removing glue driver due to unsupported bus\n");
+ err = -ENOSYS;
+ break;
+ }
+
+ if (!err)
+ {
+ pr_info("SSB/BCMA glue driver successfully detached\n");
+ wl_glue_attached = 0;
+ }
+
+ return err;
+}
+EXPORT_SYMBOL(wl_glue_unregister);
+
+struct device * wl_glue_get_dmadev(void *dev)
+{
+ struct device *dma_dev;
+
+ switch (active_bus_type)
+ {
+#ifdef CONFIG_SSB
+ case WL_GLUE_BUS_TYPE_SSB:
+ dma_dev = ((struct ssb_device *)dev)->dma_dev;
+ break;
+#endif /* CONFIG_SSB */
+
+#ifdef CONFIG_BCMA
+ case WL_GLUE_BUS_TYPE_BCMA:
+ dma_dev = ((struct bcma_device *)dev)->dma_dev;
+ break;
+#endif /* CONFIG_BCMA */
+
+ default:
+ BUG();
+ dma_dev = NULL;
+ break;
+ }
+
+ return dma_dev;
+}
+EXPORT_SYMBOL(wl_glue_get_dmadev);
+
+
+static int __init wl_glue_init(void)
+{
+#ifdef CONFIG_BCM47XX
+ /*
+ * BCM47xx currently supports either SSB or BCMA bus,
+ * determine the used one from the info set by the
+ * platform setup code.
+ */
+ switch (bcm47xx_bus_type)
+ {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ active_bus_type = WL_GLUE_BUS_TYPE_SSB;
+ break;
+#endif /* CONFIG_BCM47XX_SSB */
+
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ active_bus_type = WL_GLUE_BUS_TYPE_BCMA;
+ break;
+#endif /* CONFIG_BCM47XX_BCMA */
+ }
+#endif /* CONFIG_BCM47XX */
+
+#ifdef CONFIG_BCM63XX
+#ifdef CONFIG_SSB
+ /*
+ * BCM63xx currently only uses SSB, so assume that.
+ */
+ active_bus_type = WL_GLUE_BUS_TYPE_SSB;
+#endif /* CONFIG_SSB */
+#endif /* CONFIG_BCM63XX */
+
+ /* do not fail here, let wl_glue_register() return -ENOSYS later */
+ if (active_bus_type == WL_GLUE_BUS_TYPE_UNSPEC)
+ pr_err("Unable to determine used system bus type\n");
+
+ return 0;
+}
+
+static void __exit wl_glue_exit(void)
+{
+ if (wl_glue_attached)
+ {
+ if (wl_glue_unregister())
+ pr_err("Failed to unregister glue driver\n");
+
+ wl_glue_attached = 0;
+ }
+
+ return;
+}
+
+module_init(wl_glue_init);
+module_exit(wl_glue_exit);
diff --git a/package/kernel/broadcom-wl/src/glue/wl_glue.h b/package/kernel/broadcom-wl/src/glue/wl_glue.h
new file mode 100644
index 0000000..49610ab
--- /dev/null
+++ b/package/kernel/broadcom-wl/src/glue/wl_glue.h
@@ -0,0 +1,22 @@
+/*
+ * wl_glue.h: Broadcom WL support module providing a unified SSB/BCMA handling.
+ * Copyright (C) 2011 Jo-Philipp Wich <jo@mein.io>
+ */
+
+#include <linux/types.h>
+
+typedef void * (*wl_glue_attach_cb_t)(u16, u16, ulong, void *, u32);
+typedef void (*wl_glue_remove_cb_t)(void *);
+
+enum wl_glue_bus_type {
+ WL_GLUE_BUS_TYPE_UNSPEC,
+ WL_GLUE_BUS_TYPE_SSB,
+ WL_GLUE_BUS_TYPE_BCMA
+};
+
+extern void wl_glue_set_attach_callback(wl_glue_attach_cb_t cb);
+extern void wl_glue_set_remove_callback(wl_glue_remove_cb_t cb);
+extern int wl_glue_register(void);
+extern int wl_glue_unregister(void);
+extern struct device * wl_glue_get_dmadev(void *);
+
diff --git a/package/kernel/broadcom-wl/src/wlc.c b/package/kernel/broadcom-wl/src/wlc.c
new file mode 100644
index 0000000..46ccf94
--- /dev/null
+++ b/package/kernel/broadcom-wl/src/wlc.c
@@ -0,0 +1,1181 @@
+/*
+ * wlc - Broadcom Wireless Driver Control Utility
+ *
+ * Copyright (C) 2006 Felix Fietkau <nbd@nbd.name>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <fcntl.h>
+#include <glob.h>
+#include <ctype.h>
+
+#include <typedefs.h>
+#include <wlutils.h>
+#include <proto/802.11.h>
+
+#define VERSION "0.1"
+#define BUFSIZE 8192
+#define PTABLE_MAGIC 0xbadc0ded
+#define PTABLE_SLT1 1
+#define PTABLE_SLT2 2
+#define PTABLE_ACKW 3
+#define PTABLE_ADHM 4
+#define PTABLE_END 0xffffffff
+
+/*
+ * Copy each token in wordlist delimited by space into word
+ * Taken from Broadcom shutils.h
+ */
+#define foreach(word, wordlist, next) \
+ for (next = &wordlist[strspn(wordlist, " ")], \
+ strncpy(word, next, sizeof(word)), \
+ word[strcspn(word, " ")] = '\0', \
+ word[sizeof(word) - 1] = '\0', \
+ next = strchr(next, ' '); \
+ strlen(word); \
+ next = next ? &next[strspn(next, " ")] : "", \
+ strncpy(word, next, sizeof(word)), \
+ word[strcspn(word, " ")] = '\0', \
+ word[sizeof(word) - 1] = '\0', \
+ next = strchr(next, ' '))
+
+static char wlbuf[8192];
+static char interface[16] = "wl0";
+static unsigned long kmem_offset = 0;
+static int vif = 0, debug = 1, fromstdin = 0;
+
+typedef enum {
+ NONE = 0x00,
+
+ /* types */
+ PARAM_TYPE = 0x00f,
+ INT = 0x001,
+ STRING = 0x002,
+ MAC = 0x003,
+
+ /* options */
+ PARAM_OPTIONS = 0x0f0,
+ NOARG = 0x010,
+
+ /* modes */
+ PARAM_MODE = 0xf00,
+ GET = 0x100,
+ SET = 0x200,
+} wlc_param;
+
+struct wlc_call {
+ const char *name;
+ wlc_param param;
+ int (*handler)(wlc_param param, void *data, void *value);
+ union {
+ int num;
+ char *str;
+ void *ptr;
+ } data;
+ const char *desc;
+};
+
+/* can't use the system include because of the stupid broadcom header files */
+extern struct ether_addr *ether_aton(const char *asc);
+static inline int my_ether_ntoa(unsigned char *ea, char *buf)
+{
+ return sprintf(buf, "%02x:%02x:%02x:%02x:%02x:%02x",
+ ea[0], ea[1], ea[2], ea[3], ea[4], ea[5]);
+}
+
+static int wlc_ioctl(wlc_param param, void *data, void *value)
+{
+ unsigned int *var = ((unsigned int *) data);
+ unsigned int ioc = *var;
+
+ if (param & NOARG) {
+ return wl_ioctl(interface, ioc, NULL, 0);
+ }
+ switch(param & PARAM_TYPE) {
+ case MAC:
+ return wl_ioctl(interface, ((param & SET) ? (ioc) : (ioc >> 16)) & 0xffff, value, 6);
+ case INT:
+ return wl_ioctl(interface, ((param & SET) ? (ioc) : (ioc >> 16)) & 0xffff, value, sizeof(int));
+ case STRING:
+ return wl_ioctl(interface, ((param & SET) ? (ioc) : (ioc >> 16)) & 0xffff, value, BUFSIZE);
+ }
+ return 0;
+}
+
+static int wlc_iovar(wlc_param param, void *data, void *value)
+{
+ int *val = (int *) value;
+ char *iov = *((char **) data);
+ int ret = 0;
+
+ if (param & SET) {
+ switch(param & PARAM_TYPE) {
+ case INT:
+ ret = wl_iovar_setint(interface, iov, *val);
+ break;
+ case MAC:
+ ret = wl_iovar_set(interface, iov, value, 6);
+ break;
+ }
+ }
+ if (param & GET) {
+ switch(param & PARAM_TYPE) {
+ case INT:
+ ret = wl_iovar_get(interface, iov, val, sizeof(int));
+ break;
+ case MAC:
+ ret = wl_iovar_get(interface, iov, value, 6);
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int wlc_bssiovar(wlc_param param, void *data, void *value)
+{
+ int *val = (int *) value;
+ char *iov = *((char **) data);
+ int ret = 0;
+
+ if (param & SET) {
+ switch(param & PARAM_TYPE) {
+ case INT:
+ ret = wl_bssiovar_setint(interface, iov, vif, *val);
+ }
+ }
+ if (param & GET) {
+ switch(param & PARAM_TYPE) {
+ case INT:
+ ret = wl_bssiovar_get(interface, iov, vif, val, sizeof(int));
+ }
+ }
+
+ return ret;
+}
+
+static int wlc_vif_enabled(wlc_param param, void *data, void *value)
+{
+ int *val = (int *) value;
+ int buf[3];
+ int ret = 0;
+
+ sprintf((char *) buf, "bss");
+ buf[1] = vif;
+ if (param & SET) {
+ buf[2] = (*val ? 1 : 0);
+ ret = wl_ioctl(interface, WLC_SET_VAR, buf, sizeof(buf));
+ } else if (param & GET) {
+ ret = wl_ioctl(interface, WLC_GET_VAR, buf, sizeof(buf));
+ *val = buf[0];
+ }
+
+ return ret;
+}
+
+static int wlc_ssid(wlc_param param, void *data, void *value)
+{
+ int ret = -1, ret2 = -1;
+ char *dest = (char *) value;
+ wlc_ssid_t ssid;
+
+ if ((param & PARAM_MODE) == GET) {
+ ret = wl_bssiovar_get(interface, "ssid", vif, &ssid, sizeof(ssid));
+
+ if (ret)
+ /* if we can't get the ssid through the bssiovar, try WLC_GET_SSID */
+ ret = wl_ioctl(interface, WLC_GET_SSID, &ssid, sizeof(ssid));
+
+ if (!ret) {
+ memcpy(dest, ssid.SSID, ssid.SSID_len);
+ dest[ssid.SSID_len] = 0;
+ }
+ } else if ((param & PARAM_MODE) == SET) {
+ strncpy(ssid.SSID, value, 32);
+ ssid.SSID_len = strlen(value);
+
+ if (ssid.SSID_len > 32)
+ ssid.SSID_len = 32;
+
+ if (vif == 0) {
+ /* for the main interface, also try the WLC_SET_SSID call */
+ ret2 = wl_ioctl(interface, WLC_SET_SSID, &ssid, sizeof(ssid));
+ }
+
+ ret = wl_bssiovar_set(interface, "ssid", vif, &ssid, sizeof(ssid));
+ ret = (!ret2 ? 0 : ret);
+ }
+
+ return ret;
+}
+
+static int wlc_int(wlc_param param, void *data, void *value)
+{
+ int *var = *((int **) data);
+ int *val = (int *) value;
+
+ if ((param & PARAM_MODE) == SET) {
+ *var = *val;
+ } else if ((param & PARAM_MODE) == GET) {
+ *val = *var;
+ }
+
+ return 0;
+}
+
+static int wlc_flag(wlc_param param, void *data, void *value)
+{
+ int *var = *((int **) data);
+
+ *var = 1;
+
+ return 0;
+}
+
+static int wlc_string(wlc_param param, void *data, void *value)
+{
+ char *var = *((char **) data);
+
+ if ((param & PARAM_MODE) == GET) {
+ strcpy(value, var);
+ }
+
+ return 0;
+}
+
+static int wlc_afterburner(wlc_param param, void *data, void *value)
+{
+ int *val = (int *) value;
+ int ret = 0;
+
+ if ((param & PARAM_MODE) == GET) {
+ ret = wl_iovar_get(interface, "afterburner", val, sizeof(int));
+ } else {
+ wl_iovar_setint(interface, "wlfeatureflag", (*val ? 3 : 0));
+ ret = wl_iovar_setint(interface, "afterburner", (*val ? 1 : 0));
+ wl_iovar_setint(interface, "afterburner_override", *val);
+ }
+
+ return ret;
+}
+
+static int wlc_maclist(wlc_param param, void *data, void *value)
+{
+ unsigned int *var = ((unsigned int *) data);
+ unsigned int ioc = *var;
+ int limit = (sizeof(wlbuf) - 4) / sizeof(struct ether_addr);
+ struct maclist *list = (struct maclist *) wlbuf;
+ char *str = (char *) value;
+ char astr[30], *p;
+ struct ether_addr *addr;
+ int isset = 0;
+ int ret;
+
+ if ((param & PARAM_MODE) == GET) {
+ list->count = limit;
+ ret = wl_ioctl(interface, (ioc >> 16) & 0xffff, wlbuf, sizeof(wlbuf));
+
+ if (!ret)
+ while (list->count) {
+ str += sprintf(str, "%s", ((((char *) value) == str) ? "" : " "));
+ str += my_ether_ntoa((unsigned char *) &list->ea[list->count-- - 1], str);
+ }
+
+ return ret;
+ } else {
+ while (*str && isspace(*str))
+ *str++;
+
+ if (*str == '+') {
+ str++;
+
+ list->count = limit;
+ if (wl_ioctl(interface, (ioc >> 16) & 0xffff, wlbuf, sizeof(wlbuf)) == 0)
+ isset = 1;
+
+ while (*str && isspace(*str))
+ str++;
+ }
+
+ if (!isset)
+ memset(wlbuf, 0, sizeof(wlbuf));
+
+ foreach(astr, str, p) {
+ if (list->count >= limit)
+ break;
+
+ if ((addr = ether_aton(astr)) != NULL)
+ memcpy(&list->ea[list->count++], addr, sizeof(struct ether_addr));
+ }
+
+ return wl_ioctl(interface, ioc & 0xffff, wlbuf, sizeof(wlbuf));
+ }
+}
+
+static int wlc_radio(wlc_param param, void *data, void *value)
+{
+ int *val = (int *) value;
+ int ret;
+
+ if ((param & PARAM_MODE) == GET) {
+ ret = wl_ioctl(interface, WLC_GET_RADIO, val, sizeof(int));
+ *val = ((*val & 1) ? 0 : 1);
+ } else {
+ *val = (1 << 16) | (*val ? 0 : 1);
+ ret = wl_ioctl(interface, WLC_SET_RADIO, val, sizeof(int));
+ }
+
+ return ret;
+}
+
+static int wlc_wsec_key(wlc_param param, void *null, void *value)
+{
+ wl_wsec_key_t wsec_key;
+ unsigned char *index = value;
+ unsigned char *key;
+ unsigned char *data;
+ unsigned char hex[3];
+
+ if ((param & PARAM_MODE) != SET)
+ return 0;
+
+ memset(&wsec_key, 0, sizeof(wsec_key));
+ if (index[0] == '=') {
+ wsec_key.flags = WL_PRIMARY_KEY;
+ index++;
+ }
+
+ if ((index[0] < '1') || (index[0] > '4') || (index[1] != ','))
+ return -1;
+
+ key = index + 2;
+ if (strncmp(key, "d:", 2) == 0) { /* delete key */
+ } else if (strncmp(key, "s:", 2) == 0) { /* ascii key */
+ key += 2;
+ wsec_key.len = strlen(key);
+
+ if ((wsec_key.len != 5) && (wsec_key.len != 13))
+ return -1;
+
+ strcpy(wsec_key.data, key);
+ } else { /* hex key */
+ wsec_key.len = strlen(key);
+ if ((wsec_key.len != 10) && (wsec_key.len != 26))
+ return -1;
+
+ wsec_key.len /= 2;
+ data = wsec_key.data;
+ hex[2] = 0;
+ do {
+ hex[0] = *(key++);
+ hex[1] = *(key++);
+ *(data++) = (unsigned char) strtoul(hex, NULL, 16);
+ } while (*key != 0);
+ }
+
+ return wl_bssiovar_set(interface, "wsec_key", vif, &wsec_key, sizeof(wsec_key));
+}
+
+static int wlc_cap(wlc_param param, void *data, void *value)
+{
+ char *iov = *((char **) data);
+
+ if (param & GET)
+ return wl_iovar_get(interface, iov, value, BUFSIZE);
+
+ return -1;
+}
+
+static int wlc_bssmax(wlc_param param, void *data, void *value)
+{
+ int *val = (int *) value;
+ char *iov = *((char **) data);
+ int ret = -1;
+
+ if (param & GET) {
+ ret = wl_iovar_get(interface, iov, wlbuf, BUFSIZE);
+ if (!ret) {
+ if (strstr(wlbuf, "mbss4"))
+ *val = 4;
+ else if (strstr(wlbuf, "mbss16"))
+ *val = 16;
+ else
+ *val = 1;
+ }
+ }
+
+ return ret;
+}
+
+static inline int cw2ecw(int cw)
+{
+ int i;
+ for (cw++, i = 0; cw; i++) cw >>=1;
+ return i - 1;
+}
+
+static int wlc_wme_ac(wlc_param param, void *data, void *value)
+{
+ char *type = *((char **) data);
+ char *settings = (char *) value;
+ char cmd[100], *p, *val;
+ edcf_acparam_t params[AC_COUNT];
+ int ret;
+ int intval;
+ int cur = -1;
+ char *buf = wlbuf;
+
+ if ((param & PARAM_MODE) != SET)
+ return -1;
+
+ memset(params, 0, sizeof(params));
+ ret = wl_iovar_get(interface, type, params, sizeof(params));
+ memset(buf, 0, BUFSIZE);
+ strcpy(buf, type);
+ buf += strlen(buf) + 1;
+
+ foreach(cmd, settings, p) {
+ val = strchr(cmd, '=');
+ if (val == NULL) {
+ if (strcmp(cmd, "be") == 0)
+ cur = AC_BE;
+ else if (strcmp(cmd, "bk") == 0)
+ cur = AC_BK;
+ else if (strcmp(cmd, "vi") == 0)
+ cur = AC_VI;
+ else if (strcmp(cmd, "vo") == 0)
+ cur = AC_VO;
+ else
+ return -1;
+
+ /* just in case */
+ params[cur].ACI = (params[cur].ACI & (0x3 << 5)) | (cur << 5);
+ } else {
+ *(val++) = 0;
+
+ intval = strtoul(val, NULL, 10);
+ if (strcmp(cmd, "cwmin") == 0)
+ params[cur].ECW = (params[cur].ECW & ~(0xf)) | cw2ecw(intval);
+ else if (strcmp(cmd, "ecwmin") == 0)
+ params[cur].ECW = (params[cur].ECW & ~(0xf)) | (intval & 0xf);
+ else if (strcmp(cmd, "cwmax") == 0)
+ params[cur].ECW = (params[cur].ECW & ~(0xf << 4)) | (cw2ecw(intval) << 4);
+ else if (strcmp(cmd, "ecwmax") == 0)
+ params[cur].ECW = (params[cur].ECW & ~(0xf << 4)) | ((intval & 0xf) << 4);
+ else if (strcmp(cmd, "aifsn") == 0)
+ params[cur].ACI = (params[cur].ACI & ~(0xf)) | (intval & 0xf);
+ else if (strcmp(cmd, "txop") == 0)
+ params[cur].TXOP = intval >> 5;
+ else if (strcmp(cmd, "force") == 0)
+ params[cur].ACI = (params[cur].ACI & ~(1 << 4)) | ((intval) ? (1 << 4) : 0);
+ else return -1;
+
+ memcpy(buf, ¶ms[cur], sizeof(edcf_acparam_t));
+ wl_ioctl(interface, WLC_SET_VAR, wlbuf, BUFSIZE);
+ }
+ }
+ return ret;
+}
+
+static int wlc_ifname(wlc_param param, void *data, void *value)
+{
+ char *val = (char *) value;
+ int ret = 0;
+
+ if (param & SET) {
+ if (strlen(val) < 16)
+ strcpy(interface, val);
+ else ret = -1;
+ }
+ if (param & GET) {
+ strcpy(val, interface);
+ }
+
+ return ret;
+}
+
+static int wlc_wdsmac(wlc_param param, void *data, void *value)
+{
+ unsigned char mac[6];
+ int ret = 0;
+
+ ret = wl_ioctl(interface, WLC_WDS_GET_REMOTE_HWADDR, &mac, 6);
+ if (ret == 0)
+ my_ether_ntoa(mac, value);
+
+ return ret;
+}
+
+static int wlc_pmk(wlc_param param, void *data, void *value)
+{
+ int ret = -1;
+ char *str = (char *) value;
+ wsec_pmk_t pmk;
+
+ /* driver doesn't support GET */
+
+ if ((param & PARAM_MODE) == SET) {
+ strncpy(pmk.key, str, WSEC_MAX_PSK_LEN);
+ pmk.key_len = strlen(str);
+
+ if (pmk.key_len > WSEC_MAX_PSK_LEN)
+ pmk.key_len = WSEC_MAX_PSK_LEN;
+
+ pmk.flags = WSEC_PASSPHRASE;
+
+ ret = wl_ioctl(interface, WLC_SET_WSEC_PMK, &pmk, sizeof(pmk));
+ }
+
+ return ret;
+}
+
+static const struct wlc_call wlc_calls[] = {
+ {
+ .name = "version",
+ .param = STRING|NOARG,
+ .handler = wlc_string,
+ .data.str = VERSION,
+ .desc = "Version of this program"
+ },
+ {
+ .name = "debug",
+ .param = INT,
+ .handler = wlc_int,
+ .data.ptr = &debug,
+ .desc = "wlc debug level"
+ },
+ {
+ .name = "stdin",
+ .param = NOARG,
+ .handler = wlc_flag,
+ .data.ptr = &fromstdin,
+ .desc = "Accept input from stdin"
+ },
+ {
+ .name = "ifname",
+ .param = STRING,
+ .handler = wlc_ifname,
+ .desc = "interface to send commands to"
+ },
+ {
+ .name = "up",
+ .param = NOARG,
+ .handler = wlc_ioctl,
+ .data.num = WLC_UP,
+ .desc = "Bring the interface up"
+ },
+ {
+ .name = "down",
+ .param = NOARG,
+ .handler = wlc_ioctl,
+ .data.num = WLC_DOWN,
+ .desc = "Bring the interface down"
+ },
+ {
+ .name = "radio",
+ .param = INT,
+ .handler = wlc_radio,
+ .desc = "Radio enabled flag"
+ },
+ {
+ .name = "ap",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_AP << 16) | WLC_SET_AP),
+ .desc = "Access Point mode"
+ },
+ {
+ .name = "mssid",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "mbss",
+ .desc = "Multi-ssid mode"
+ },
+ {
+ .name = "apsta",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "apsta",
+ .desc = "AP+STA mode"
+ },
+ {
+ .name = "infra",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_INFRA << 16) | WLC_SET_INFRA),
+ .desc = "Infrastructure mode"
+ },
+ {
+ .name = "wet",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_WET << 16) | WLC_SET_WET),
+ .desc = "Wireless repeater mode",
+ },
+ {
+ .name = "statimeout",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "sta_retry_time",
+ .desc = "STA connection timeout"
+ },
+ {
+ .name = "country",
+ .param = STRING,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_COUNTRY << 16) | WLC_SET_COUNTRY),
+ .desc = "Country code"
+ },
+ {
+ .name = "channel",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_CHANNEL << 16) | WLC_SET_CHANNEL),
+ .desc = "Channel",
+ },
+ {
+ .name = "vlan_mode",
+ .param = INT,
+ .handler = wlc_bssiovar,
+ .data.str = "vlan_mode",
+ .desc = "Parse 802.1Q tags",
+ },
+ {
+ .name = "vif",
+ .param = INT,
+ .handler = wlc_int,
+ .data.ptr = &vif,
+ .desc = "Current vif index"
+ },
+ {
+ .name = "enabled",
+ .param = INT,
+ .handler = wlc_vif_enabled,
+ .desc = "vif enabled flag"
+ },
+ {
+ .name = "ssid",
+ .param = STRING,
+ .handler = wlc_ssid,
+ .desc = "Interface ESSID"
+ },
+ {
+ .name = "closed",
+ .param = INT,
+ .handler = wlc_bssiovar,
+ .data.str = "closednet",
+ .desc = "Hidden ESSID flag"
+ },
+ {
+ .name = "wsec",
+ .param = INT,
+ .handler = wlc_bssiovar,
+ .data.str = "wsec",
+ .desc = "Security mode flags"
+ },
+ {
+ .name = "wepkey",
+ .param = STRING,
+ .handler = wlc_wsec_key,
+ .desc = "Set/Remove WEP keys"
+ },
+ {
+ .name = "wepauth",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_AUTH << 16) | WLC_SET_AUTH),
+ .desc = "WEP authentication type. 0 = OpenSystem, 1 = SharedKey"
+ },
+ {
+ .name = "wsec_restrict",
+ .param = INT,
+ .handler = wlc_bssiovar,
+ .data.str = "wsec_restrict",
+ .desc = "Drop unencrypted traffic"
+ },
+ {
+ .name = "eap_restrict",
+ .param = INT,
+ .handler = wlc_bssiovar,
+ .data.str = "eap_restrict",
+ .desc = "Only allow 802.1X traffic until 802.1X authorized"
+ },
+ {
+ .name = "wpa_auth",
+ .param = INT,
+ .handler = wlc_bssiovar,
+ .data.str = "wpa_auth",
+ .desc = "WPA authentication modes"
+ },
+ {
+ .name = "ap_isolate",
+ .param = INT,
+ .handler = wlc_bssiovar,
+ .data.str = "ap_isolate",
+ .desc = "Isolate connected clients"
+ },
+ {
+ .name = "supplicant",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "sup_wpa",
+ .desc = "Built-in WPA supplicant"
+ },
+ {
+ .name = "passphrase",
+ .param = STRING,
+ .handler = wlc_pmk,
+ .desc = "Passphrase for built-in WPA supplicant",
+ },
+ {
+ .name = "maxassoc",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "maxassoc",
+ .desc = "Max. number of associated clients",
+ },
+ {
+ .name = "wme",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "wme",
+ .desc = "WME enabled"
+ },
+ {
+ .name = "wme_ac_ap",
+ .param = STRING,
+ .handler = wlc_wme_ac,
+ .data.str = "wme_ac_ap",
+ .desc = "Set WME AC options for AP mode",
+ },
+ {
+ .name = "wme_ac_sta",
+ .param = STRING,
+ .handler = wlc_wme_ac,
+ .data.str = "wme_ac_sta",
+ .desc = "Set WME AC options for STA mode",
+ },
+ {
+ .name = "wme_noack",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "wme_noack",
+ .desc = "WME ACK disable request",
+ },
+ {
+ .name = "802.11d",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_REGULATORY << 16) | WLC_SET_REGULATORY),
+ .desc = "Enable/disable 802.11d regulatory management",
+ },
+ {
+ .name = "802.11h",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_SPECT_MANAGMENT << 16) | WLC_SET_SPECT_MANAGMENT),
+ .desc = "Enable/disable 802.11h spectrum management",
+ },
+ {
+ .name = "fragthresh",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "fragthresh",
+ .desc = "Fragmentation threshold",
+ },
+ {
+ .name = "rtsthresh",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "rtsthresh",
+ .desc = "RTS threshold"
+ },
+ {
+ .name = "slottime",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "acktiming",
+ .desc = "Slot time"
+ },
+ {
+ .name = "rxant",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_ANTDIV << 16) | WLC_SET_ANTDIV),
+ .desc = "Rx antenna selection"
+ },
+ {
+ .name = "txant",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_TXANT << 16) | WLC_SET_TXANT),
+ .desc = "Tx antenna selection"
+ },
+ {
+ .name = "dtim",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_DTIMPRD << 16) | WLC_SET_DTIMPRD),
+ .desc = "DTIM period",
+ },
+ {
+ .name = "bcn",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_BCNPRD << 16) | WLC_SET_BCNPRD),
+ .desc = "Beacon interval"
+ },
+ {
+ .name = "frameburst",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_FAKEFRAG << 16) | WLC_SET_FAKEFRAG),
+ .desc = "Framebursting"
+ },
+ {
+ .name = "monitor",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_MONITOR << 16) | WLC_SET_MONITOR),
+ .desc = "Monitor mode"
+ },
+ {
+ .name = "passive_scan",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_PASSIVE_SCAN << 16) | WLC_SET_PASSIVE_SCAN),
+ .desc = "Passive scan mode"
+ },
+ {
+ .name = "macfilter",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_MACMODE << 16) | WLC_SET_MACMODE),
+ .desc = "MAC filter mode (0:disabled, 1:deny, 2:allow)"
+ },
+ {
+ .name = "maclist",
+ .param = STRING,
+ .data.num = ((WLC_GET_MACLIST << 16) | WLC_SET_MACLIST),
+ .handler = wlc_maclist,
+ .desc = "MAC filter list"
+ },
+ {
+ .name = "autowds",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_LAZYWDS << 16) | WLC_SET_LAZYWDS),
+ .desc = "Automatic WDS"
+ },
+ {
+ .name = "wds",
+ .param = STRING,
+ .data.num = ((WLC_GET_WDSLIST << 16) | WLC_SET_WDSLIST),
+ .handler = wlc_maclist,
+ .desc = "WDS connection list"
+ },
+ {
+ .name = "wdstimeout",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "wdstimeout",
+ .desc = "WDS link detection timeout"
+ },
+ {
+ .name = "wdsmac",
+ .param = STRING|NOARG,
+ .handler = wlc_wdsmac,
+ .desc = "MAC of the remote WDS endpoint (only with wds0.* interfaces)"
+ },
+ {
+ .name = "afterburner",
+ .param = INT,
+ .handler = wlc_afterburner,
+ .desc = "Broadcom Afterburner"
+ },
+ {
+ .name = "ibss_merge",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "ibss_coalesce_allowed",
+ .desc = "Allow IBSS merges"
+ },
+ {
+ .name = "bssid",
+ .param = MAC,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_BSSID << 16) | WLC_SET_BSSID),
+ .desc = "BSSID"
+ },
+ {
+ .name = "cur_etheraddr",
+ .param = MAC,
+ .handler = wlc_iovar,
+ .data.str = "cur_etheraddr",
+ .desc = "Current MAC Address"
+ },
+ {
+ .name = "default_bssid",
+ .param = MAC,
+ .handler = wlc_iovar,
+ .data.str = "perm_etheraddr",
+ .desc = "Default BSSID (read-only)"
+ },
+ {
+ .name = "assoclist",
+ .param = STRING,
+ .data.num = (WLC_GET_ASSOCLIST << 16),
+ .handler = wlc_maclist,
+ .desc = "MACs of associated stations"
+ },
+ {
+ .name = "gmode",
+ .param = INT,
+ .data.num = ((WLC_GET_GMODE << 16) | WLC_SET_GMODE),
+ .handler = wlc_ioctl,
+ .desc = "G Mode"
+ },
+ {
+ .name = "phytype",
+ .param = INT,
+ .data.num = (WLC_GET_PHYTYPE << 16),
+ .handler = wlc_ioctl,
+ .desc = "PHY Type (read-only)"
+ },
+ {
+ .name = "nmode",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "nmode",
+ .desc = "N Mode"
+ },
+ {
+ .name = "nreqd",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "nreqd",
+ .desc = "N Mode required"
+ },
+ {
+ .name = "chanspec",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "chanspec",
+ .desc = "Channel Spec (See bcmwifi.h)"
+ },
+ {
+ .name = "band",
+ .param = INT,
+ .data.num = ((WLC_GET_BAND << 16) | WLC_SET_BAND),
+ .handler = wlc_ioctl,
+ .desc = "Band (0=auto, 1=5Ghz, 2=2.4GHz)"
+ },
+ {
+ .name = "cap",
+ .param = STRING|NOARG,
+ .handler = wlc_cap,
+ .data.str = "cap",
+ .desc = "Capabilities"
+ },
+ {
+ .name = "bssmax",
+ .param = INT|NOARG,
+ .handler = wlc_bssmax,
+ .data.str = "cap",
+ .desc = "Number of VIF's supported"
+ },
+ {
+ .name = "leddc",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "leddc",
+ .desc = "LED Duty Cycle"
+ },
+
+};
+#define wlc_calls_size (sizeof(wlc_calls) / sizeof(struct wlc_call))
+
+static void usage(char *cmd)
+{
+ int i;
+ fprintf(stderr, "Usage: %s <command> [<argument> ...]\n"
+ "\n"
+ "Available commands:\n", cmd);
+ for (i = 0; i < wlc_calls_size; i++) {
+ fprintf(stderr, "\t%-16s\t%s\n", wlc_calls[i].name ?: "", wlc_calls[i].desc ?: "");
+ }
+ fprintf(stderr, "\n");
+ exit(1);
+}
+
+static int do_command(const struct wlc_call *cmd, char *arg)
+{
+ static char buf[BUFSIZE];
+ int set;
+ int ret = 0;
+ char *format, *end;
+ int intval;
+ void *ptr = (void *) buf;
+
+ if (debug >= 10) {
+ fprintf(stderr, "do_command %-16s\t'%s'\n", cmd->name, arg);
+ }
+
+ if ((arg == NULL) && ((cmd->param & PARAM_TYPE) != NONE)) {
+ set = 0;
+ ret = cmd->handler(cmd->param | GET, (void *) &cmd->data, (void *) buf);
+ if (ret == 0) {
+ switch(cmd->param & PARAM_TYPE) {
+ case INT:
+ intval = *((int *) buf);
+
+ if (intval > 65535)
+ format = "0x%08x\n";
+ else if (intval > 255)
+ format = "0x%04x\n";
+ else
+ format = "%d\n";
+
+ fprintf(stdout, format, intval);
+ break;
+ case STRING:
+ fprintf(stdout, "%s\n", buf);
+ break;
+ case MAC:
+ my_ether_ntoa(buf, buf + 6);
+ fprintf(stdout, "%s\n", buf + 6);
+ break;
+ }
+ }
+ } else { /* SET */
+ set = 1;
+ switch(cmd->param & PARAM_TYPE) {
+ case INT:
+ intval = strtoul(arg, &end, 0);
+ if (end && !(*end)) {
+ memcpy(buf, &intval, sizeof(intval));
+ } else {
+ fprintf(stderr, "%s: Invalid argument\n", cmd->name);
+ return -1;
+ }
+ break;
+ case STRING:
+ strncpy(buf, arg, BUFSIZE);
+ buf[BUFSIZE - 1] = 0;
+ break;
+ case MAC:
+ ptr = ether_aton(arg);
+ if (!ptr) {
+ fprintf(stderr, "%s: Invalid mac address '%s'\n", cmd->name, arg);
+ return -1;
+ }
+ break;
+ }
+
+ ret = cmd->handler(cmd->param | SET, (void *) &cmd->data, ptr);
+ }
+
+ if ((debug > 0) && (ret != 0))
+ fprintf(stderr, "Command '%s %s' failed: %d\n", (set == 1 ? "set" : "get"), cmd->name, ret);
+
+ return ret;
+}
+
+static struct wlc_call *find_cmd(char *name)
+{
+ int found = 0, i = 0;
+
+ while (!found && (i < wlc_calls_size)) {
+ if (strcmp(name, wlc_calls[i].name) == 0)
+ found = 1;
+ else
+ i++;
+ }
+
+ return (struct wlc_call *) (found ? &wlc_calls[i] : NULL);
+}
+
+int main(int argc, char **argv)
+{
+ static char buf[BUFSIZE];
+ char *s, *s2;
+ char *cmd = argv[0];
+ struct wlc_call *call;
+ int ret = 0;
+
+ if (argc < 2)
+ usage(argv[0]);
+
+ for(interface[2] = '0'; (interface[2] < '3') && (wl_probe(interface) != 0); interface[2]++);
+ if (interface[2] == '3') {
+ fprintf(stderr, "No Broadcom wl interface found!\n");
+ return -1;
+ }
+
+ argv++;
+ argc--;
+ while ((argc > 0) && (argv[0] != NULL)) {
+ if ((call = find_cmd(argv[0])) == NULL) {
+ fprintf(stderr, "Invalid command: %s\n\n", argv[0]);
+ usage(cmd);
+ }
+ if ((argc > 1) && (!(call->param & NOARG))) {
+ ret = do_command(call, argv[1]);
+ argv += 2;
+ argc -= 2;
+ } else {
+ ret = do_command(call, NULL);
+ argv++;
+ argc--;
+ }
+ }
+
+ while (fromstdin && !feof(stdin)) {
+ *buf = 0;
+ fgets(buf, BUFSIZE - 1, stdin);
+
+ if (*buf == 0)
+ continue;
+
+ if ((s = strchr(buf, '\r')) != NULL)
+ *s = 0;
+ if ((s = strchr(buf, '\n')) != NULL)
+ *s = 0;
+
+ s = buf;
+ while (isspace(*s))
+ s++;
+
+ if (!*s)
+ continue;
+
+ if ((s2 = strchr(s, ' ')) != NULL)
+ *(s2++) = 0;
+
+ while (s2 && isspace(*s2))
+ s2++;
+
+ if ((call = find_cmd(s)) == NULL) {
+ fprintf(stderr, "Invalid command: %s\n", s);
+ ret = -1;
+ } else
+ ret = do_command(call, ((call->param & NOARG) ? NULL : s2));
+ }
+
+ return ret;
+}