ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/package/kernel/linux/modules/usb.mk b/package/kernel/linux/modules/usb.mk
new file mode 100644
index 0000000..5055702
--- /dev/null
+++ b/package/kernel/linux/modules/usb.mk
@@ -0,0 +1,1919 @@
+#
+# Copyright (C) 2006-2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+USB_MENU:=USB Support
+
+USBNET_DIR:=net/usb
+USBHID_DIR?=hid/usbhid
+USBINPUT_DIR?=input/misc
+
+define KernelPackage/usb-core
+ SUBMENU:=$(USB_MENU)
+ TITLE:=Support for USB
+ DEPENDS:=@USB_SUPPORT
+ KCONFIG:=CONFIG_USB CONFIG_XPS_USB_HCD_XILINX=n CONFIG_USB_FHCI_HCD=n
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/core/usbcore.ko \
+ $(LINUX_DIR)/drivers/usb/common/usb-common.ko
+ AUTOLOAD:=$(call AutoLoad,20,usb-common usbcore,1)
+ $(call AddDepends/nls)
+endef
+
+define KernelPackage/usb-core/description
+ Kernel support for USB
+endef
+
+$(eval $(call KernelPackage,usb-core))
+
+
+define AddDepends/usb
+ SUBMENU:=$(USB_MENU)
+ DEPENDS+=+kmod-usb-core $(1)
+endef
+
+
+define KernelPackage/usb-ledtrig-usbport
+ TITLE:=LED trigger for USB ports
+ KCONFIG:=CONFIG_USB_LEDS_TRIGGER_USBPORT
+ FILES:=$(LINUX_DIR)/drivers/usb/core/ledtrig-usbport.ko
+ AUTOLOAD:=$(call AutoLoad,50,ledtrig-usbport)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-ledtrig-usbport/description
+ This driver allows LEDs to be controlled by USB events. Enabling this
+ trigger allows specifying list of USB ports that should turn on LED
+ when some USB device gets connected.
+ If possible it should be prefered over similar ledtrig-usbdev.
+endef
+
+$(eval $(call KernelPackage,usb-ledtrig-usbport))
+
+
+define KernelPackage/usb-phy-nop
+ TITLE:=Support for USB NOP transceiver
+ KCONFIG:=CONFIG_NOP_USB_XCEIV
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-generic.ko
+ AUTOLOAD:=$(call AutoLoad,21,phy-generic,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-phy-nop/description
+ Support for USB NOP transceiver
+endef
+
+$(eval $(call KernelPackage,usb-phy-nop))
+
+
+define KernelPackage/phy-ath79-usb
+ TITLE:=Support for ATH79 USB PHY
+ KCONFIG:=CONFIG_PHY_AR7100_USB \
+ CONFIG_PHY_AR7200_USB
+ DEPENDS:=@TARGET_ath79
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/phy/phy-ar7100-usb.ko \
+ $(LINUX_DIR)/drivers/phy/phy-ar7200-usb.ko
+ AUTOLOAD:=$(call AutoLoad,21,phy-ar7100-usb phy-ar7200-usb,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/phy-ath79-usb/description
+ Support for ATH79 USB transceiver
+endef
+
+$(eval $(call KernelPackage,phy-ath79-usb))
+
+
+define KernelPackage/usb-gadget
+ TITLE:=USB Gadget support
+ KCONFIG:=CONFIG_USB_GADGET
+ HIDDEN:=1
+ FILES:=\
+ $(LINUX_DIR)/drivers/usb/gadget/udc/udc-core.ko
+ AUTOLOAD:=$(call AutoLoad,21,udc-core,1)
+ DEPENDS:=@USB_GADGET_SUPPORT
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-gadget/description
+ Kernel support for USB Gadget mode
+endef
+
+$(eval $(call KernelPackage,usb-gadget))
+
+define KernelPackage/usb-lib-composite
+ TITLE:=USB lib composite
+ KCONFIG:=CONFIG_USB_LIBCOMPOSITE
+ DEPENDS:=+kmod-usb-gadget +kmod-fs-configfs
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/usb/gadget/libcomposite.ko
+ AUTOLOAD:=$(call AutoLoad,50,libcomposite)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-lib-composite/description
+ Lib Composite
+endef
+
+$(eval $(call KernelPackage,usb-lib-composite))
+
+define KernelPackage/usb-gadget-hid
+ TITLE:=USB HID Gadget Support
+ KCONFIG:=CONFIG_USB_G_HID
+ DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/gadget/legacy/g_hid.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_hid.ko
+ AUTOLOAD:=$(call AutoLoad,52,usb_f_hid)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-gadget-hid/description
+ Kernel support for USB HID Gadget.
+endef
+
+$(eval $(call KernelPackage,usb-gadget-hid))
+
+define KernelPackage/usb-gadget-ehci-debug
+ TITLE:=USB EHCI debug port Gadget support
+ KCONFIG:=\
+ CONFIG_USB_G_DBGP \
+ CONFIG_USB_G_DBGP_SERIAL=y \
+ CONFIG_USB_G_DBGP_PRINTK=n
+ DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite +kmod-usb-gadget-serial
+ FILES:=$(LINUX_DIR)/drivers/usb/gadget/legacy/g_dbgp.ko
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-gadget-ehci-debug/description
+ Kernel support for USB EHCI debug port Gadget.
+endef
+
+$(eval $(call KernelPackage,usb-gadget-ehci-debug))
+
+define KernelPackage/usb-gadget-eth
+ TITLE:=USB Ethernet Gadget support
+ KCONFIG:= \
+ CONFIG_USB_ETH \
+ CONFIG_USB_ETH_RNDIS=y \
+ CONFIG_USB_ETH_EEM=n
+ DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/gadget/function/u_ether.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_ecm.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_ecm_subset.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_rndis.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/legacy/g_ether.ko
+ AUTOLOAD:=$(call AutoLoad,52,usb_f_ecm)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-gadget-eth/description
+ Kernel support for USB Ethernet Gadget
+endef
+
+$(eval $(call KernelPackage,usb-gadget-eth))
+
+define KernelPackage/usb-gadget-ncm
+ TITLE:=USB Network Control Model (NCM) Gadget support
+ KCONFIG:=CONFIG_USB_G_NCM
+ DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite \
+ +kmod-usb-gadget-eth
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_ncm.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/legacy/g_ncm.ko
+ AUTOLOAD:=$(call AutoLoad,52,usb_f_ncm)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-gadget-ncm/description
+ Kernel support for USB Network Control Model (NCM) Gadget
+endef
+
+$(eval $(call KernelPackage,usb-gadget-ncm))
+
+define KernelPackage/usb-gadget-serial
+ TITLE:=USB Serial Gadget support
+ KCONFIG:=CONFIG_USB_G_SERIAL
+ DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/gadget/function/u_serial.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_acm.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_obex.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_serial.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/legacy/g_serial.ko
+ AUTOLOAD:=$(call AutoLoad,52,usb_f_acm)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-gadget-serial/description
+ Kernel support for USB Serial Gadget.
+endef
+
+$(eval $(call KernelPackage,usb-gadget-serial))
+
+define KernelPackage/usb-gadget-mass-storage
+ TITLE:=USB Mass Storage support
+ KCONFIG:=CONFIG_USB_MASS_STORAGE
+ DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_mass_storage.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/legacy/g_mass_storage.ko
+ AUTOLOAD:=$(call AutoLoad,52,usb_f_mass_storage)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-gadget-mass-storage/description
+ Kernel support for USB Gadget Mass Storage
+endef
+
+$(eval $(call KernelPackage,usb-gadget-mass-storage))
+
+define KernelPackage/usb-gadget-cdc-composite
+ TITLE:= USB CDC Composite (Ethernet + ACM)
+ KCONFIG:=CONFIG_USB_CDC_COMPOSITE
+ DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite \
+ +kmod-usb-gadget-eth +kmod-usb-gadget-serial
+ FILES:= $(LINUX_DIR)/drivers/usb/gadget/legacy/g_cdc.ko
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-gadget-cdc-composite/description
+ Kernel support for the USB CDC Composite gadget.
+ This appears as an ethernet + ACM serial gadget.
+endef
+
+$(eval $(call KernelPackage,usb-gadget-cdc-composite))
+
+
+define KernelPackage/usb-uhci
+ TITLE:=Support for UHCI controllers
+ KCONFIG:= \
+ CONFIG_USB_PCI=y \
+ CONFIG_USB_UHCI_ALT \
+ CONFIG_USB_UHCI_HCD
+ FILES:=$(LINUX_DIR)/drivers/usb/host/uhci-hcd.ko
+ AUTOLOAD:=$(call AutoLoad,50,uhci-hcd,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-uhci/description
+ Kernel support for USB UHCI controllers
+endef
+
+$(eval $(call KernelPackage,usb-uhci,1))
+
+
+define KernelPackage/usb-ohci
+ TITLE:=Support for OHCI controllers
+ DEPENDS:= \
+ +TARGET_bcm53xx:kmod-usb-bcma \
+ +TARGET_bcm47xx:kmod-usb-bcma \
+ +TARGET_bcm47xx:kmod-usb-ssb
+ KCONFIG:= \
+ CONFIG_USB_OHCI \
+ CONFIG_USB_OHCI_HCD \
+ CONFIG_USB_OHCI_ATH79=y \
+ CONFIG_USB_OHCI_HCD_AT91=y \
+ CONFIG_USB_OHCI_BCM63XX=y \
+ CONFIG_USB_OCTEON_OHCI=y \
+ CONFIG_USB_OHCI_HCD_OMAP3=y \
+ CONFIG_USB_OHCI_HCD_PLATFORM=y
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/host/ohci-hcd.ko \
+ $(LINUX_DIR)/drivers/usb/host/ohci-platform.ko
+ ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ohci-at91.ko),)
+ FILES+=$(LINUX_DIR)/drivers/usb/host/ohci-at91.ko
+ endif
+ AUTOLOAD:=$(call AutoLoad,50,ohci-hcd ohci-platform ohci-at91,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-ohci/description
+ Kernel support for USB OHCI controllers
+endef
+
+$(eval $(call KernelPackage,usb-ohci,1))
+
+
+define KernelPackage/usb-ohci-pci
+ TITLE:=Support for PCI OHCI controllers
+ DEPENDS:=@PCI_SUPPORT +kmod-usb-ohci
+ KCONFIG:= \
+ CONFIG_USB_PCI=y \
+ CONFIG_USB_OHCI_HCD_PCI
+ FILES:=$(LINUX_DIR)/drivers/usb/host/ohci-pci.ko
+ AUTOLOAD:=$(call AutoLoad,51,ohci-pci,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-ohci-pci/description
+ Kernel support for PCI OHCI controllers
+endef
+
+$(eval $(call KernelPackage,usb-ohci-pci))
+
+
+define KernelPackage/usb-bcma
+ TITLE:=Support for BCMA USB controllers
+ DEPENDS:=@USB_SUPPORT @TARGET_bcm47xx||TARGET_bcm53xx
+ HIDDEN:=1
+ KCONFIG:=CONFIG_USB_HCD_BCMA
+ FILES:= \
+ $(if $(CONFIG_USB_HCD_BCMA),$(LINUX_DIR)/drivers/usb/host/bcma-hcd.ko)
+ AUTOLOAD:=$(call AutoLoad,19,$(if $(CONFIG_USB_HCD_BCMA),bcma-hcd),1)
+ $(call AddDepends/usb)
+endef
+$(eval $(call KernelPackage,usb-bcma))
+
+define KernelPackage/usb-ssb
+ TITLE:=Support for SSB USB controllers
+ DEPENDS:=@USB_SUPPORT @TARGET_bcm47xx
+ HIDDEN:=1
+ KCONFIG:=CONFIG_USB_HCD_SSB
+ FILES:= \
+ $(if $(CONFIG_USB_HCD_SSB),$(LINUX_DIR)/drivers/usb/host/ssb-hcd.ko)
+ AUTOLOAD:=$(call AutoLoad,19,$(if $(CONFIG_USB_HCD_SSB),ssb-hcd),1)
+ $(call AddDepends/usb)
+endef
+$(eval $(call KernelPackage,usb-ssb))
+
+define KernelPackage/usb-ehci
+ TITLE:=EHCI controller support
+ HIDDEN:=1
+ KCONFIG:= \
+ CONFIG_USB_EHCI_HCD
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/host/ehci-hcd.ko
+ AUTOLOAD:=$(call AutoLoad,35,ehci-hcd,1)
+ $(call AddDepends/usb)
+endef
+$(eval $(call KernelPackage,usb-ehci))
+
+define KernelPackage/usb2
+ TITLE:=Support for USB2 controllers
+ DEPENDS:=\
+ +TARGET_bcm47xx:kmod-usb-bcma \
+ +TARGET_bcm47xx:kmod-usb-ssb \
+ +TARGET_bcm53xx:kmod-usb-bcma \
+ +TARGET_bcm53xx:kmod-phy-bcm-ns-usb2 \
+ +TARGET_ath79:kmod-phy-ath79-usb \
+ +kmod-usb-ehci
+ KCONFIG:=\
+ CONFIG_USB_EHCI_HCD_PLATFORM \
+ CONFIG_USB_EHCI_BCM63XX=y \
+ CONFIG_USB_IMX21_HCD=y \
+ CONFIG_USB_EHCI_MXC=y \
+ CONFIG_USB_OCTEON_EHCI=y \
+ CONFIG_USB_EHCI_HCD_ORION=y \
+ CONFIG_USB_EHCI_HCD_AT91=y \
+ CONFIG_USB_EHCI_FSL
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/host/ehci-platform.ko
+ ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ehci-orion.ko),)
+ FILES+=$(LINUX_DIR)/drivers/usb/host/ehci-orion.ko
+ endif
+ ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ehci-atmel.ko),)
+ FILES+=$(LINUX_DIR)/drivers/usb/host/ehci-atmel.ko
+ endif
+ ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ehci-fsl.ko),)
+ FILES+=$(LINUX_DIR)/drivers/usb/host/ehci-fsl.ko
+ endif
+ ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/fsl-mph-dr-of.ko),)
+ FILES+=$(LINUX_DIR)/drivers/usb/host/fsl-mph-dr-of.ko
+ endif
+ AUTOLOAD:=$(call AutoLoad,40,ehci-hcd ehci-platform ehci-orion ehci-atmel ehci-fsl fsl-mph-dr-of,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb2/description
+ Kernel support for USB2 (EHCI) controllers
+endef
+
+$(eval $(call KernelPackage,usb2))
+
+
+define KernelPackage/usb2-pci
+ TITLE:=Support for PCI USB2 controllers
+ DEPENDS:=@PCI_SUPPORT +kmod-usb2
+ KCONFIG:= \
+ CONFIG_USB_PCI=y \
+ CONFIG_USB_EHCI_PCI
+ FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-pci.ko
+ AUTOLOAD:=$(call AutoLoad,42,ehci-pci,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb2-pci/description
+ Kernel support for PCI USB2 (EHCI) controllers
+endef
+
+$(eval $(call KernelPackage,usb2-pci))
+
+
+define KernelPackage/usb-dwc2
+ TITLE:=DWC2 USB controller driver
+ DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget +kmod-usb-roles
+ KCONFIG:= \
+ CONFIG_USB_DWC2 \
+ CONFIG_USB_DWC2_DEBUG=n \
+ CONFIG_USB_DWC2_VERBOSE=n \
+ CONFIG_USB_DWC2_TRACK_MISSED_SOFS=n \
+ CONFIG_USB_DWC2_DEBUG_PERIODIC=n
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/dwc2/dwc2.ko
+ AUTOLOAD:=$(call AutoLoad,54,dwc2,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-dwc2/description
+ This driver provides USB Device Controller support for the
+ Synopsys DesignWare USB OTG Core
+endef
+
+$(eval $(call KernelPackage,usb-dwc2))
+
+
+define KernelPackage/usb-dwc2-pci
+ TITLE:=DWC2 USB controller driver (PCI)
+ DEPENDS:=@PCI_SUPPORT +kmod-usb-dwc2 +kmod-usb-phy-nop
+ KCONFIG:= \
+ CONFIG_USB_PCI=y \
+ CONFIG_USB_DWC2_PCI
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/dwc2/dwc2_pci.ko
+ AUTOLOAD:=$(call AutoLoad,54,dwc2_pci,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-dwc2-pci/description
+ The Designware USB2.0 PCI interface module for controllers
+ connected to a PCI bus.
+endef
+
+$(eval $(call KernelPackage,usb-dwc2-pci))
+
+
+define KernelPackage/usb-cdns
+ TITLE:=Cadence USB USB controller driver
+ DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget +kmod-usb-roles
+ KCONFIG:= \
+ CONFIG_USB_CDNS_SUPPORT
+ FILES:= $(LINUX_DIR)/drivers/usb/cdns3/cdns-usb-common.ko
+ AUTOLOAD:=$(call AutoLoad,50,cdns-usb-common,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-cdns/description
+ This driver provides USB Device Controller support for the
+ Cadence USB Core
+endef
+
+$(eval $(call KernelPackage,usb-cdns))
+
+
+define KernelPackage/usb-cdns3
+ TITLE:=Cadence USB3 USB controller driver
+ DEPENDS:=+kmod-usb-cdns
+ KCONFIG:= \
+ CONFIG_USB_CDNS3 \
+ CONFIG_USB_CDNS3_GADGET=y \
+ CONFIG_USB_CDNS3_HOST=y
+ FILES:= $(LINUX_DIR)/drivers/usb/cdns3/cdns3.ko
+ AUTOLOAD:=$(call AutoLoad,54,cdns3,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-cdns3/description
+ This driver provides support for the Dual Role SuperSpeed
+ USB Controller based on the Cadence USB3 IP Core
+endef
+
+$(eval $(call KernelPackage,usb-cdns3))
+
+
+define KernelPackage/usb-dwc3
+ TITLE:=DWC3 USB controller driver
+ KCONFIG:= \
+ CONFIG_USB_DWC3 \
+ CONFIG_USB_DWC3_HOST=y \
+ CONFIG_USB_DWC3_GADGET=n \
+ CONFIG_USB_DWC3_DUAL_ROLE=n \
+ CONFIG_USB_DWC3_DEBUG=n \
+ CONFIG_USB_DWC3_VERBOSE=n
+ FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3.ko
+ AUTOLOAD:=$(call AutoLoad,54,dwc3,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-dwc3/description
+ This driver provides support for the Dual Role SuperSpeed
+ USB Controller based on the Synopsys DesignWare USB3 IP Core
+endef
+
+$(eval $(call KernelPackage,usb-dwc3))
+
+
+define KernelPackage/usb-dwc3-qcom
+ TITLE:=DWC3 Qualcomm USB driver
+ DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x||TARGET_qualcommax) +kmod-usb-dwc3
+ KCONFIG:= CONFIG_USB_DWC3_QCOM
+ FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-qcom.ko
+ AUTOLOAD:=$(call AutoLoad,53,dwc3-qcom,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-dwc3-qcom/description
+ Some Qualcomm SoCs use DesignWare Core IP for USB2/3 functionality.
+ This driver also handles Qscratch wrapper which is needed for
+ peripheral mode support.
+endef
+
+
+$(eval $(call KernelPackage,usb-dwc3-qcom))
+
+
+define KernelPackage/usb-acm
+ TITLE:=Support for modems/isdn controllers
+ KCONFIG:=CONFIG_USB_ACM
+ FILES:=$(LINUX_DIR)/drivers/usb/class/cdc-acm.ko
+ AUTOLOAD:=$(call AutoProbe,cdc-acm)
+$(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-acm/description
+ Kernel support for USB ACM devices (modems/isdn controllers)
+endef
+
+$(eval $(call KernelPackage,usb-acm))
+
+
+define KernelPackage/usb-wdm
+ TITLE:=USB Wireless Device Management
+ KCONFIG:=CONFIG_USB_WDM
+ FILES:=$(LINUX_DIR)/drivers/usb/class/cdc-wdm.ko
+ AUTOLOAD:=$(call AutoProbe,cdc-wdm)
+$(call AddDepends/usb)
+$(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-wdm/description
+ USB Wireless Device Management support
+endef
+
+$(eval $(call KernelPackage,usb-wdm))
+
+
+define KernelPackage/usb-audio
+ TITLE:=Support for USB audio devices
+ KCONFIG:= \
+ CONFIG_SND_USB=y \
+ CONFIG_SND_USB_AUDIO
+ $(call AddDepends/usb)
+ $(call AddDepends/sound)
+ DEPENDS+=+(LINUX_6_1||LINUX_6_6):kmod-media-core
+ FILES:= \
+ $(LINUX_DIR)/sound/usb/snd-usbmidi-lib.ko \
+ $(LINUX_DIR)/sound/usb/snd-usb-audio.ko
+ AUTOLOAD:=$(call AutoProbe,snd-usbmidi-lib snd-usb-audio)
+endef
+
+define KernelPackage/usb-audio/description
+ Kernel support for USB audio devices
+endef
+
+$(eval $(call KernelPackage,usb-audio))
+
+
+define KernelPackage/usb-printer
+ TITLE:=Support for printers
+ KCONFIG:=CONFIG_USB_PRINTER
+ FILES:=$(LINUX_DIR)/drivers/usb/class/usblp.ko
+ AUTOLOAD:=$(call AutoProbe,usblp)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-printer/description
+ Kernel support for USB printers
+endef
+
+$(eval $(call KernelPackage,usb-printer))
+
+
+define KernelPackage/usb-serial
+ TITLE:=Support for USB-to-Serial converters
+ KCONFIG:=CONFIG_USB_SERIAL
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/usbserial.ko
+ AUTOLOAD:=$(call AutoProbe,usbserial)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-serial/description
+ Kernel support for USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial))
+
+
+define AddDepends/usb-serial
+ SUBMENU:=$(USB_MENU)
+ DEPENDS+=+kmod-usb-serial $(1)
+endef
+
+
+define KernelPackage/usb-serial-belkin
+ TITLE:=Support for Belkin devices
+ KCONFIG:=CONFIG_USB_SERIAL_BELKIN
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/belkin_sa.ko
+ AUTOLOAD:=$(call AutoProbe,belkin_sa)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-belkin/description
+ Kernel support for Belkin USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-belkin))
+
+
+define KernelPackage/usb-serial-ch341
+ TITLE:=Support for CH341 devices
+ KCONFIG:=CONFIG_USB_SERIAL_CH341
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/ch341.ko
+ AUTOLOAD:=$(call AutoProbe,ch341)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-ch341/description
+ Kernel support for Winchiphead CH341 USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-ch341))
+
+
+define KernelPackage/usb-serial-ch348
+ TITLE:=Support for CH348 devices
+ KCONFIG:=CONFIG_USB_SERIAL_CH348
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/ch348.ko
+ AUTOLOAD:=$(call AutoProbe,ch348)
+ DEPENDS:=@(LINUX_6_1||LINUX_6_6)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-ch348/description
+ Kernel support for Winchiphead CH348 USB-to-8x-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-ch348))
+
+
+define KernelPackage/usb-serial-edgeport
+ TITLE:=Support for Digi Edgeport devices
+ KCONFIG:=CONFIG_USB_SERIAL_EDGEPORT
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/io_edgeport.ko
+ AUTOLOAD:=$(call AutoProbe,io_edgeport)
+ $(call AddDepends/usb-serial)
+ DEPENDS+=+edgeport-firmware
+endef
+
+define KernelPackage/usb-serial-edgeport/description
+ Kernel support for Inside Out Networks (Digi)
+ Edgeport/4
+ Rapidport/4
+ Edgeport/4t
+ Edgeport/2
+ Edgeport/4i
+ Edgeport/2i
+ Edgeport/421
+ Edgeport/21
+ Edgeport/8
+ Edgeport/8 Dual
+ Edgeport/2D8
+ Edgeport/4D8
+ Edgeport/8i
+ Edgeport/2 DIN
+ Edgeport/4 DIN
+ Edgeport/16 Dual
+endef
+
+$(eval $(call KernelPackage,usb-serial-edgeport))
+
+
+define KernelPackage/usb-serial-ftdi
+ TITLE:=Support for FTDI devices
+ KCONFIG:=CONFIG_USB_SERIAL_FTDI_SIO
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/ftdi_sio.ko
+ AUTOLOAD:=$(call AutoProbe,ftdi_sio)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-ftdi/description
+ Kernel support for FTDI USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-ftdi))
+
+
+define KernelPackage/usb-serial-garmin
+ TITLE:=Support for Garmin GPS devices
+ KCONFIG:=CONFIG_USB_SERIAL_GARMIN
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/garmin_gps.ko
+ AUTOLOAD:=$(call AutoProbe,garmin_gps)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-garmin/description
+ Should work with most Garmin GPS devices which have a native USB port.
+endef
+
+$(eval $(call KernelPackage,usb-serial-garmin))
+
+
+define KernelPackage/usb-serial-simple
+ TITLE:=USB Serial Simple (Motorola phone)
+ KCONFIG:=CONFIG_USB_SERIAL_SIMPLE
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/usb-serial-simple.ko
+ AUTOLOAD:=$(call AutoProbe,usb-serial-simple)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-simple/description
+ Kernel support for "very simple devices".
+
+Specifically, it supports:
+ - Suunto ANT+ USB device.
+ - Medtronic CareLink USB device (3.18)
+ - Fundamental Software dongle.
+ - Google USB serial devices (3.19)
+ - HP4x calculators
+ - a number of Motorola phones
+ - Novatel Wireless GPS receivers (3.18)
+ - Siemens USB/MPI adapter.
+ - ViVOtech ViVOpay USB device.
+ - Infineon Modem Flashloader USB interface
+ - ZIO Motherboard USB serial interface
+endef
+
+$(eval $(call KernelPackage,usb-serial-simple))
+
+
+define KernelPackage/usb-serial-ti-usb
+ TITLE:=Support for TI USB 3410/5052
+ KCONFIG:=CONFIG_USB_SERIAL_TI
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/ti_usb_3410_5052.ko
+ AUTOLOAD:=$(call AutoProbe,ti_usb_3410_5052)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-ti-usb/description
+ Kernel support for TI USB 3410/5052 devices
+endef
+
+$(eval $(call KernelPackage,usb-serial-ti-usb))
+
+
+define KernelPackage/usb-serial-ipw
+ TITLE:=Support for IPWireless 3G devices
+ KCONFIG:=CONFIG_USB_SERIAL_IPW
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/ipw.ko
+ AUTOLOAD:=$(call AutoProbe,ipw)
+ $(call AddDepends/usb-serial,+kmod-usb-serial-wwan)
+endef
+
+$(eval $(call KernelPackage,usb-serial-ipw))
+
+
+define KernelPackage/usb-serial-mct
+ TITLE:=Support for Magic Control Tech. devices
+ KCONFIG:=CONFIG_USB_SERIAL_MCT_U232
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/mct_u232.ko
+ AUTOLOAD:=$(call AutoProbe,mct_u232)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-mct/description
+ Kernel support for Magic Control Technology USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-mct))
+
+
+define KernelPackage/usb-serial-mos7720
+ TITLE:=Support for Moschip MOS7720 devices
+ KCONFIG:= \
+ CONFIG_USB_SERIAL_MOS7720 \
+ CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/mos7720.ko
+ DEPENDS:=+kmod-ppdev
+ AUTOLOAD:=$(call AutoProbe,mos7720)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-mos7720/description
+ Kernel support for Moschip MOS7720 USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-mos7720))
+
+
+define KernelPackage/usb-serial-mos7840
+ TITLE:=Support for Moschip MOS7840 devices
+ KCONFIG:=CONFIG_USB_SERIAL_MOS7840
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/mos7840.ko
+ AUTOLOAD:=$(call AutoProbe,mos7840)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-mos7840/description
+ Kernel support for Moschip MOS7840 USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-mos7840))
+
+
+define KernelPackage/usb-serial-pl2303
+ TITLE:=Support for Prolific PL2303 devices
+ KCONFIG:=CONFIG_USB_SERIAL_PL2303
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/pl2303.ko
+ AUTOLOAD:=$(call AutoProbe,pl2303)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-pl2303/description
+ Kernel support for Prolific PL2303 USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-pl2303))
+
+
+define KernelPackage/usb-serial-cp210x
+ TITLE:=Support for Silicon Labs cp210x devices
+ KCONFIG:=CONFIG_USB_SERIAL_CP210X
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/cp210x.ko
+ AUTOLOAD:=$(call AutoProbe,cp210x)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-cp210x/description
+ Kernel support for Silicon Labs cp210x USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-cp210x))
+
+
+define KernelPackage/usb-serial-ark3116
+ TITLE:=Support for ArkMicroChips ARK3116 devices
+ KCONFIG:=CONFIG_USB_SERIAL_ARK3116
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/ark3116.ko
+ AUTOLOAD:=$(call AutoProbe,ark3116)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-ark3116/description
+ Kernel support for ArkMicroChips ARK3116 USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-ark3116))
+
+
+define KernelPackage/usb-serial-oti6858
+ TITLE:=Support for Ours Technology OTI6858 devices
+ KCONFIG:=CONFIG_USB_SERIAL_OTI6858
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/oti6858.ko
+ AUTOLOAD:=$(call AutoProbe,oti6858)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-oti6858/description
+ Kernel support for Ours Technology OTI6858 USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-oti6858))
+
+
+define KernelPackage/usb-serial-sierrawireless
+ TITLE:=Support for Sierra Wireless devices
+ KCONFIG:=CONFIG_USB_SERIAL_SIERRAWIRELESS
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/sierra.ko
+ AUTOLOAD:=$(call AutoProbe,sierra)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-sierrawireless/description
+ Kernel support for Sierra Wireless devices
+endef
+
+$(eval $(call KernelPackage,usb-serial-sierrawireless))
+
+
+define KernelPackage/usb-serial-visor
+ TITLE:=Support for Handspring Visor devices
+ KCONFIG:=CONFIG_USB_SERIAL_VISOR
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/visor.ko
+ AUTOLOAD:=$(call AutoProbe,visor)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-visor/description
+ Kernel support for Handspring Visor PDAs
+endef
+
+$(eval $(call KernelPackage,usb-serial-visor))
+
+
+define KernelPackage/usb-serial-cypress-m8
+ TITLE:=Support for CypressM8 USB-Serial
+ KCONFIG:=CONFIG_USB_SERIAL_CYPRESS_M8
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/cypress_m8.ko
+ AUTOLOAD:=$(call AutoProbe,cypress_m8)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-cypress-m8/description
+ Kernel support for devices with Cypress M8 USB to Serial chip
+ (for example, the Delorme Earthmate LT-20 GPS)
+ Supported microcontrollers in the CY4601 family are:
+ CY7C63741 CY7C63742 CY7C63743 CY7C64013
+endef
+
+$(eval $(call KernelPackage,usb-serial-cypress-m8))
+
+
+define KernelPackage/usb-serial-keyspan
+ TITLE:=Support for Keyspan USB-to-Serial devices
+ KCONFIG:= \
+ CONFIG_USB_SERIAL_KEYSPAN \
+ CONFIG_USB_SERIAL_KEYSPAN_USA28 \
+ CONFIG_USB_SERIAL_KEYSPAN_USA28X \
+ CONFIG_USB_SERIAL_KEYSPAN_USA28XA \
+ CONFIG_USB_SERIAL_KEYSPAN_USA28XB \
+ CONFIG_USB_SERIAL_KEYSPAN_USA19 \
+ CONFIG_USB_SERIAL_KEYSPAN_USA18X \
+ CONFIG_USB_SERIAL_KEYSPAN_USA19W \
+ CONFIG_USB_SERIAL_KEYSPAN_USA19QW \
+ CONFIG_USB_SERIAL_KEYSPAN_USA19QI \
+ CONFIG_USB_SERIAL_KEYSPAN_MPR \
+ CONFIG_USB_SERIAL_KEYSPAN_USA49W \
+ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/serial/keyspan.ko \
+ $(wildcard $(LINUX_DIR)/drivers/usb/misc/ezusb.ko)
+ AUTOLOAD:=$(call AutoProbe,ezusb keyspan)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-keyspan/description
+ Kernel support for Keyspan USB-to-Serial devices
+endef
+
+$(eval $(call KernelPackage,usb-serial-keyspan))
+
+
+define KernelPackage/usb-serial-wwan
+ TITLE:=Support for GSM and CDMA modems
+ KCONFIG:=CONFIG_USB_SERIAL_WWAN
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/usb_wwan.ko
+ HIDDEN:=1
+ AUTOLOAD:=$(call AutoProbe,usb_wwan)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-wwan/description
+ Kernel support for USB GSM and CDMA modems
+endef
+
+$(eval $(call KernelPackage,usb-serial-wwan))
+
+
+define KernelPackage/usb-serial-option
+ TITLE:=Support for Option HSDPA modems
+ KCONFIG:=CONFIG_USB_SERIAL_OPTION
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/option.ko
+ AUTOLOAD:=$(call AutoProbe,option)
+ $(call AddDepends/usb-serial,+kmod-usb-serial-wwan)
+endef
+
+define KernelPackage/usb-serial-option/description
+ Kernel support for Option HSDPA modems
+endef
+
+$(eval $(call KernelPackage,usb-serial-option))
+
+
+define KernelPackage/usb-serial-qualcomm
+ TITLE:=Support for Qualcomm USB serial
+ KCONFIG:=CONFIG_USB_SERIAL_QUALCOMM
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/qcserial.ko
+ AUTOLOAD:=$(call AutoProbe,qcserial)
+ $(call AddDepends/usb-serial,+kmod-usb-serial-wwan)
+endef
+
+define KernelPackage/usb-serial-qualcomm/description
+ Kernel support for Qualcomm USB Serial devices (Gobi)
+endef
+
+$(eval $(call KernelPackage,usb-serial-qualcomm))
+
+
+define KernelPackage/usb-storage
+ TITLE:=USB Storage support
+ DEPENDS:= +kmod-scsi-core
+ KCONFIG:=CONFIG_USB_STORAGE
+ FILES:=$(LINUX_DIR)/drivers/usb/storage/usb-storage.ko
+ AUTOLOAD:=$(call AutoProbe,usb-storage,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-storage/description
+ Kernel support for USB Mass Storage devices
+endef
+
+$(eval $(call KernelPackage,usb-storage))
+
+
+define KernelPackage/usb-storage-extras
+ SUBMENU:=$(USB_MENU)
+ TITLE:=Extra drivers for usb-storage
+ DEPENDS:=+kmod-usb-storage
+ KCONFIG:= \
+ CONFIG_USB_STORAGE_ALAUDA \
+ CONFIG_USB_STORAGE_CYPRESS_ATACB \
+ CONFIG_USB_STORAGE_DATAFAB \
+ CONFIG_USB_STORAGE_FREECOM \
+ CONFIG_USB_STORAGE_ISD200 \
+ CONFIG_USB_STORAGE_JUMPSHOT \
+ CONFIG_USB_STORAGE_KARMA \
+ CONFIG_USB_STORAGE_SDDR09 \
+ CONFIG_USB_STORAGE_SDDR55 \
+ CONFIG_USB_STORAGE_USBAT
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/storage/ums-alauda.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-cypress.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-datafab.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-freecom.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-isd200.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-jumpshot.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-karma.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-sddr09.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-sddr55.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-usbat.ko
+ AUTOLOAD:=$(call AutoProbe,ums-alauda ums-cypress ums-datafab \
+ ums-freecom ums-isd200 ums-jumpshot \
+ ums-karma ums-sddr09 ums-sddr55 ums-usbat)
+endef
+
+define KernelPackage/usb-storage-extras/description
+ Say Y here if you want to have some more drivers,
+ such as for SmartMedia card readers
+endef
+
+$(eval $(call KernelPackage,usb-storage-extras))
+
+
+define KernelPackage/usb-storage-uas
+ SUBMENU:=$(USB_MENU)
+ TITLE:=USB Attached SCSI (UASP) support
+ DEPENDS:=+kmod-usb-storage
+ KCONFIG:=CONFIG_USB_UAS
+ FILES:=$(LINUX_DIR)/drivers/usb/storage/uas.ko
+ AUTOLOAD:=$(call AutoProbe,uas,1)
+endef
+
+define KernelPackage/usb-storage-uas/description
+ Say Y here if you want to include support for
+ USB Attached SCSI (UAS/UASP), a higher
+ performance protocol available on many
+ newer USB 3.0 storage devices
+endef
+
+$(eval $(call KernelPackage,usb-storage-uas))
+
+
+define KernelPackage/usb-atm
+ TITLE:=Support for ATM on USB bus
+ DEPENDS:=+kmod-atm
+ KCONFIG:=CONFIG_USB_ATM
+ FILES:=$(LINUX_DIR)/drivers/usb/atm/usbatm.ko
+ AUTOLOAD:=$(call AutoProbe,usbatm)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-atm/description
+ Kernel support for USB DSL modems
+endef
+
+$(eval $(call KernelPackage,usb-atm))
+
+
+define AddDepends/usb-atm
+ SUBMENU:=$(USB_MENU)
+ DEPENDS+=kmod-usb-atm $(1)
+endef
+
+
+define KernelPackage/usb-atm-speedtouch
+ TITLE:=SpeedTouch USB ADSL modems support
+ KCONFIG:=CONFIG_USB_SPEEDTOUCH
+ FILES:=$(LINUX_DIR)/drivers/usb/atm/speedtch.ko
+ AUTOLOAD:=$(call AutoProbe,speedtch)
+ $(call AddDepends/usb-atm)
+endef
+
+define KernelPackage/usb-atm-speedtouch/description
+ Kernel support for SpeedTouch USB ADSL modems
+endef
+
+$(eval $(call KernelPackage,usb-atm-speedtouch))
+
+
+define KernelPackage/usb-atm-ueagle
+ TITLE:=Eagle 8051 based USB ADSL modems support
+ FILES:=$(LINUX_DIR)/drivers/usb/atm/ueagle-atm.ko
+ KCONFIG:=CONFIG_USB_UEAGLEATM
+ AUTOLOAD:=$(call AutoProbe,ueagle-atm)
+ $(call AddDepends/usb-atm)
+endef
+
+define KernelPackage/usb-atm-ueagle/description
+ Kernel support for Eagle 8051 based USB ADSL modems
+endef
+
+$(eval $(call KernelPackage,usb-atm-ueagle))
+
+
+define KernelPackage/usb-atm-cxacru
+ TITLE:=cxacru
+ FILES:=$(LINUX_DIR)/drivers/usb/atm/cxacru.ko
+ KCONFIG:=CONFIG_USB_CXACRU
+ AUTOLOAD:=$(call AutoProbe,cxacru)
+ $(call AddDepends/usb-atm)
+endef
+
+define KernelPackage/usb-atm-cxacru/description
+ Kernel support for cxacru based USB ADSL modems
+endef
+
+$(eval $(call KernelPackage,usb-atm-cxacru))
+
+
+define KernelPackage/usb-net
+ TITLE:=Kernel modules for USB-to-Ethernet convertors
+ DEPENDS:=+kmod-mii
+ KCONFIG:=CONFIG_USB_USBNET \
+ CONFIG_USB_NET_DRIVERS
+ AUTOLOAD:=$(call AutoProbe,usbnet)
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/usbnet.ko
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-net/description
+ Kernel modules for USB-to-Ethernet convertors
+endef
+
+$(eval $(call KernelPackage,usb-net))
+
+
+define AddDepends/usb-net
+ SUBMENU:=$(USB_MENU)
+ DEPENDS+=+kmod-usb-net $(1)
+endef
+
+
+define KernelPackage/usb-net-aqc111
+ TITLE:=Support for USB-to-Ethernet Aquantia AQtion 5/2.5GbE
+ KCONFIG:=CONFIG_USB_NET_AQC111
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/aqc111.ko
+ AUTOLOAD:=$(call AutoProbe,aqc111)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-aqc111/description
+ Support for USB-to-Ethernet Aquantia AQtion 5/2.5GbE
+endef
+
+$(eval $(call KernelPackage,usb-net-aqc111))
+
+
+define KernelPackage/usb-net-asix
+ TITLE:=Kernel module for USB-to-Ethernet Asix convertors
+ DEPENDS:=+kmod-phy-ax88796b +(LINUX_6_1||LINUX_6_6):kmod-phylink \
+ +(LINUX_5_15||LINUX_6_1||LINUX_6_6):kmod-mdio-devres \
+ +(LINUX_5_15||LINUX_6_1||LINUX_6_6):kmod-net-selftests
+ KCONFIG:=CONFIG_USB_NET_AX8817X
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/asix.ko
+ AUTOLOAD:=$(call AutoProbe,asix)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-asix/description
+ Kernel module for USB-to-Ethernet Asix convertors
+endef
+
+$(eval $(call KernelPackage,usb-net-asix))
+
+
+define KernelPackage/usb-net-asix-ax88179
+ TITLE:=Kernel module for USB-to-Gigabit-Ethernet Asix convertors
+ DEPENDS:=+kmod-libphy
+ KCONFIG:=CONFIG_USB_NET_AX88179_178A
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/ax88179_178a.ko
+ AUTOLOAD:=$(call AutoProbe,ax88179_178a)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-asix-ax88179/description
+ Kernel module for USB-to-Ethernet ASIX AX88179 based USB 3.0/2.0
+ to Gigabit Ethernet adapters.
+endef
+
+$(eval $(call KernelPackage,usb-net-asix-ax88179))
+
+
+define KernelPackage/usb-net-hso
+ TITLE:=Kernel module for Option USB High Speed Mobile Devices
+ KCONFIG:=CONFIG_USB_HSO
+ FILES:= \
+ $(LINUX_DIR)/drivers/$(USBNET_DIR)/hso.ko
+ AUTOLOAD:=$(call AutoProbe,hso)
+ $(call AddDepends/usb-net)
+ $(call AddDepends/rfkill)
+endef
+
+define KernelPackage/usb-net-hso/description
+ Kernel module for Option USB High Speed Mobile Devices
+endef
+
+$(eval $(call KernelPackage,usb-net-hso))
+
+
+define KernelPackage/usb-net-kaweth
+ TITLE:=Kernel module for USB-to-Ethernet Kaweth convertors
+ KCONFIG:=CONFIG_USB_KAWETH
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/kaweth.ko
+ AUTOLOAD:=$(call AutoProbe,kaweth)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-kaweth/description
+ Kernel module for USB-to-Ethernet Kaweth convertors
+endef
+
+$(eval $(call KernelPackage,usb-net-kaweth))
+
+
+define KernelPackage/usb-net-lan78xx
+ TITLE:=USB-To-Ethernet Microchip LAN78XX convertors
+ DEPENDS:=+kmod-fixed-phy +kmod-phy-microchip +PACKAGE_kmod-of-mdio:kmod-of-mdio
+ KCONFIG:=CONFIG_USB_LAN78XX
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/lan78xx.ko
+ AUTOLOAD:=$(call AutoProbe,lan78xx)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-lan78xx/description
+ Kernel module for Microchip LAN78XX based USB 2 & USB 3
+ 10/100/1000 Ethernet adapters.
+endef
+
+$(eval $(call KernelPackage,usb-net-lan78xx))
+
+
+define KernelPackage/usb-net-pegasus
+ TITLE:=Kernel module for USB-to-Ethernet Pegasus convertors
+ KCONFIG:=CONFIG_USB_PEGASUS
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/pegasus.ko
+ AUTOLOAD:=$(call AutoProbe,pegasus)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-pegasus/description
+ Kernel module for USB-to-Ethernet Pegasus convertors
+endef
+
+$(eval $(call KernelPackage,usb-net-pegasus))
+
+
+define KernelPackage/usb-net-mcs7830
+ TITLE:=Kernel module for USB-to-Ethernet MCS7830 convertors
+ KCONFIG:=CONFIG_USB_NET_MCS7830
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/mcs7830.ko
+ AUTOLOAD:=$(call AutoProbe,mcs7830)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-mcs7830/description
+ Kernel module for USB-to-Ethernet MCS7830 convertors
+endef
+
+$(eval $(call KernelPackage,usb-net-mcs7830))
+
+
+define KernelPackage/usb-net-smsc75xx
+ TITLE:=SMSC LAN75XX based USB 2.0 Gigabit ethernet devices
+ DEPENDS:=+!LINUX_5_4:kmod-libphy
+ KCONFIG:=CONFIG_USB_NET_SMSC75XX
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/smsc75xx.ko
+ AUTOLOAD:=$(call AutoProbe,smsc75xx)
+ $(call AddDepends/usb-net, +kmod-lib-crc16)
+endef
+
+define KernelPackage/usb-net-smsc75xx/description
+ Kernel module for SMSC LAN75XX based devices
+endef
+
+$(eval $(call KernelPackage,usb-net-smsc75xx))
+
+
+define KernelPackage/usb-net-smsc95xx
+ TITLE:=SMSC LAN95XX based USB 2.0 10/100 ethernet devices
+ DEPENDS:=+!LINUX_5_4:kmod-libphy +kmod-phy-smsc \
+ +(LINUX_6_1||LINUX_6_6):kmod-net-selftests
+ KCONFIG:=CONFIG_USB_NET_SMSC95XX
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/smsc95xx.ko
+ AUTOLOAD:=$(call AutoProbe,smsc95xx)
+ $(call AddDepends/usb-net, +kmod-lib-crc16)
+endef
+
+define KernelPackage/usb-net-smsc95xx/description
+ Kernel module for SMSC LAN95XX based devices
+endef
+
+$(eval $(call KernelPackage,usb-net-smsc95xx))
+
+
+define KernelPackage/usb-net-dm9601-ether
+ TITLE:=Support for DM9601 ethernet connections
+ KCONFIG:=CONFIG_USB_NET_DM9601
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/dm9601.ko
+ AUTOLOAD:=$(call AutoProbe,dm9601)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-dm9601-ether/description
+ Kernel support for USB DM9601 devices
+endef
+
+$(eval $(call KernelPackage,usb-net-dm9601-ether))
+
+define KernelPackage/usb-net-cdc-ether
+ TITLE:=Support for cdc ethernet connections
+ KCONFIG:=CONFIG_USB_NET_CDCETHER
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_ether.ko
+ AUTOLOAD:=$(call AutoProbe,cdc_ether)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-cdc-ether/description
+ Kernel support for USB CDC Ethernet devices
+endef
+
+$(eval $(call KernelPackage,usb-net-cdc-ether))
+
+
+define KernelPackage/usb-net-cdc-eem
+ TITLE:=Support for CDC EEM connections
+ KCONFIG:=CONFIG_USB_NET_CDC_EEM
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_eem.ko
+ AUTOLOAD:=$(call AutoProbe,cdc_eem)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-cdc-eem/description
+ Kernel support for USB CDC EEM
+endef
+
+$(eval $(call KernelPackage,usb-net-cdc-eem))
+
+
+define KernelPackage/usb-net-cdc-subset
+ TITLE:=Support for CDC Ethernet subset connections
+ KCONFIG:= \
+ CONFIG_USB_NET_CDC_SUBSET \
+ CONFIG_USB_ARMLINUX
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_subset.ko
+ AUTOLOAD:=$(call AutoProbe,cdc_subset)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-cdc-subset/description
+ Kernel support for Simple USB Network Links (CDC Ethernet subset)
+endef
+
+$(eval $(call KernelPackage,usb-net-cdc-subset))
+
+
+define KernelPackage/usb-net-qmi-wwan
+ TITLE:=QMI WWAN driver
+ KCONFIG:=CONFIG_USB_NET_QMI_WWAN
+ FILES:= $(LINUX_DIR)/drivers/$(USBNET_DIR)/qmi_wwan.ko
+ AUTOLOAD:=$(call AutoProbe,qmi_wwan)
+ $(call AddDepends/usb-net,+kmod-usb-wdm)
+endef
+
+define KernelPackage/usb-net-qmi-wwan/description
+ QMI WWAN driver for Qualcomm MSM based 3G and LTE modems
+endef
+
+$(eval $(call KernelPackage,usb-net-qmi-wwan))
+
+
+define KernelPackage/usb-net-rtl8150
+ TITLE:=Kernel module for USB-to-Ethernet Realtek convertors
+ KCONFIG:=CONFIG_USB_RTL8150
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/rtl8150.ko
+ AUTOLOAD:=$(call AutoProbe,rtl8150)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-rtl8150/description
+ Kernel module for USB-to-Ethernet Realtek 8150 convertors
+endef
+
+$(eval $(call KernelPackage,usb-net-rtl8150))
+
+
+define KernelPackage/usb-net-rtl8152
+ TITLE:=Kernel module for USB-to-Ethernet Realtek convertors
+ DEPENDS:=+r8152-firmware +kmod-crypto-sha256 +kmod-usb-net-cdc-ncm
+ KCONFIG:=CONFIG_USB_RTL8152
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/r8152.ko
+ AUTOLOAD:=$(call AutoProbe,r8152)
+ $(call AddDepends/usb-net, +LINUX_5_10:kmod-crypto-hash)
+endef
+
+define KernelPackage/usb-net-rtl8152/description
+ Kernel module for USB-to-Ethernet Realtek 8152 USB2.0/3.0 convertors
+endef
+
+$(eval $(call KernelPackage,usb-net-rtl8152))
+
+
+define KernelPackage/usb-net-sr9700
+ TITLE:=Support for CoreChip SR9700 ethernet devices
+ KCONFIG:=CONFIG_USB_NET_SR9700
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/sr9700.ko
+ AUTOLOAD:=$(call AutoProbe,sr9700)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-sr9700/description
+ Kernel module for CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices
+endef
+
+$(eval $(call KernelPackage,usb-net-sr9700))
+
+
+define KernelPackage/usb-net-rndis
+ TITLE:=Support for RNDIS connections
+ KCONFIG:=CONFIG_USB_NET_RNDIS_HOST
+ FILES:= $(LINUX_DIR)/drivers/$(USBNET_DIR)/rndis_host.ko
+ AUTOLOAD:=$(call AutoProbe,rndis_host)
+ $(call AddDepends/usb-net,+kmod-usb-net-cdc-ether)
+endef
+
+define KernelPackage/usb-net-rndis/description
+ Kernel support for RNDIS connections
+endef
+
+$(eval $(call KernelPackage,usb-net-rndis))
+
+
+define KernelPackage/usb-net-cdc-mbim
+ SUBMENU:=$(USB_MENU)
+ TITLE:=Kernel module for MBIM Devices
+ KCONFIG:=CONFIG_USB_NET_CDC_MBIM
+ FILES:= \
+ $(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_mbim.ko
+ AUTOLOAD:=$(call AutoProbe,cdc_mbim)
+ $(call AddDepends/usb-net,+kmod-usb-wdm +kmod-usb-net-cdc-ncm)
+endef
+
+define KernelPackage/usb-net-cdc-mbim/description
+ Kernel module for CDC MBIM (Mobile Broadband Interface Model) devices
+endef
+
+$(eval $(call KernelPackage,usb-net-cdc-mbim))
+
+
+define KernelPackage/usb-net-cdc-ncm
+ TITLE:=Support for CDC NCM connections
+ KCONFIG:=CONFIG_USB_NET_CDC_NCM
+ FILES:= $(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_ncm.ko
+ AUTOLOAD:=$(call AutoProbe,cdc_ncm)
+ $(call AddDepends/usb-net,+!LINUX_5_4:kmod-usb-net-cdc-ether)
+endef
+
+define KernelPackage/usb-net-cdc-ncm/description
+ Kernel support for CDC NCM connections
+endef
+
+$(eval $(call KernelPackage,usb-net-cdc-ncm))
+
+
+define KernelPackage/usb-net-huawei-cdc-ncm
+ TITLE:=Support for Huawei CDC NCM connections
+ KCONFIG:=CONFIG_USB_NET_HUAWEI_CDC_NCM
+ FILES:= $(LINUX_DIR)/drivers/$(USBNET_DIR)/huawei_cdc_ncm.ko
+ AUTOLOAD:=$(call AutoProbe,huawei_cdc_ncm)
+ $(call AddDepends/usb-net,+kmod-usb-net-cdc-ncm +kmod-usb-wdm)
+endef
+
+define KernelPackage/usb-net-huawei-cdc-ncm/description
+ Kernel support for Huawei CDC NCM connections
+endef
+
+$(eval $(call KernelPackage,usb-net-huawei-cdc-ncm))
+
+
+define KernelPackage/usb-net-sierrawireless
+ TITLE:=Support for Sierra Wireless devices
+ KCONFIG:=CONFIG_USB_SIERRA_NET
+ FILES:=$(LINUX_DIR)/drivers/net/usb/sierra_net.ko
+ AUTOLOAD:=$(call AutoProbe,sierra_net)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-sierrawireless/description
+ Kernel support for Sierra Wireless devices
+endef
+
+$(eval $(call KernelPackage,usb-net-sierrawireless))
+
+
+define KernelPackage/usb-net-ipheth
+ TITLE:=Apple iPhone USB Ethernet driver
+ KCONFIG:=CONFIG_USB_IPHETH
+ FILES:=$(LINUX_DIR)/drivers/net/usb/ipheth.ko
+ AUTOLOAD:=$(call AutoProbe,ipheth)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-ipheth/description
+ Kernel support for Apple iPhone USB Ethernet driver
+endef
+
+$(eval $(call KernelPackage,usb-net-ipheth))
+
+
+define KernelPackage/usb-net-kalmia
+ TITLE:=Samsung Kalmia based LTE USB modem
+ KCONFIG:=CONFIG_USB_NET_KALMIA
+ FILES:=$(LINUX_DIR)/drivers/net/usb/kalmia.ko
+ AUTOLOAD:=$(call AutoProbe,kalmia)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-kalmia/description
+ Kernel support for Samsung Kalmia based LTE USB modem
+endef
+
+$(eval $(call KernelPackage,usb-net-kalmia))
+
+define KernelPackage/usb-net-pl
+ TITLE:=Prolific PL-2301/2302/25A1 based cables
+ KCONFIG:=CONFIG_USB_NET_PLUSB
+ FILES:=$(LINUX_DIR)/drivers/net/usb/plusb.ko
+ AUTOLOAD:=$(call AutoProbe,plusb)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-pl/description
+ Kernel support for Prolific PL-2301/2302/25A1 based cables
+endef
+
+$(eval $(call KernelPackage,usb-net-pl))
+
+define KernelPackage/usb-hid
+ TITLE:=Support for USB Human Input Devices
+ KCONFIG:=CONFIG_HID_SUPPORT=y CONFIG_USB_HID CONFIG_USB_HIDDEV=y
+ DEPENDS:=+kmod-hid +kmod-hid-generic +kmod-input-evdev
+ FILES:=$(LINUX_DIR)/drivers/$(USBHID_DIR)/usbhid.ko
+ AUTOLOAD:=$(call AutoProbe,usbhid)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-hid/description
+ Kernel support for USB HID devices such as keyboards and mice
+endef
+
+$(eval $(call KernelPackage,usb-hid))
+
+
+define KernelPackage/usb-hid-cp2112
+ SUBMENU:=$(USB_MENU)
+ TITLE:=Silicon Labs CP2112 HID USB to SMBus Master Bridge
+ KCONFIG:=CONFIG_HID_CP2112
+ DEPENDS:=@GPIO_SUPPORT +kmod-usb-hid +kmod-i2c-core
+ FILES:=$(LINUX_DIR)/drivers/hid/hid-cp2112.ko
+ AUTOLOAD:=$(call AutoProbe,hid-cp2112)
+endef
+
+define KernelPackage/usb-hid-cp2112/description
+ HID device driver which registers as an i2c adapter and gpiochip to expose
+ these functions of the CP2112.
+endef
+
+$(eval $(call KernelPackage,usb-hid-cp2112))
+
+
+define KernelPackage/usb-hid-mcp2221
+ SUBMENU:=$(USB_MENU)
+ TITLE:=Microchip USB 2.0 to I2C/UART Protocol Converter with GPIO
+ KCONFIG:=CONFIG_HID_MCP2221
+ DEPENDS:=@GPIO_SUPPORT +kmod-usb-hid +kmod-i2c-core +LINUX_6_6:kmod-iio-core
+ FILES:=$(LINUX_DIR)/drivers/hid/hid-mcp2221.ko
+ AUTOLOAD:=$(call AutoProbe,hid-mcp2221)
+endef
+
+define KernelPackage/usb-hid-mcp2221/description
+ HID device driver which registers as an i2c adapter and gpiochip to expose
+ these functions of the MCP2221.
+endef
+
+$(eval $(call KernelPackage,usb-hid-mcp2221))
+
+
+define KernelPackage/usb-yealink
+ TITLE:=USB Yealink VOIP phone
+ DEPENDS:=+kmod-input-evdev
+ KCONFIG:=CONFIG_USB_YEALINK CONFIG_INPUT_YEALINK CONFIG_INPUT=m CONFIG_INPUT_MISC=y
+ FILES:=$(LINUX_DIR)/drivers/$(USBINPUT_DIR)/yealink.ko
+ AUTOLOAD:=$(call AutoProbe,yealink)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-yealink/description
+ Kernel support for Yealink VOIP phone
+endef
+
+$(eval $(call KernelPackage,usb-yealink))
+
+
+define KernelPackage/usb-cm109
+ TITLE:=Support for CM109 device
+ DEPENDS:=+kmod-input-evdev
+ KCONFIG:=CONFIG_USB_CM109 CONFIG_INPUT_CM109 CONFIG_INPUT=m CONFIG_INPUT_MISC=y
+ FILES:=$(LINUX_DIR)/drivers/$(USBINPUT_DIR)/cm109.ko
+ AUTOLOAD:=$(call AutoProbe,cm109)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-cm109/description
+ Kernel support for CM109 VOIP phone
+endef
+
+$(eval $(call KernelPackage,usb-cm109))
+
+
+define KernelPackage/usb-test
+ TITLE:=USB Testing Driver
+ DEPENDS:=@DEVEL
+ KCONFIG:=CONFIG_USB_TEST
+ FILES:=$(LINUX_DIR)/drivers/usb/misc/usbtest.ko
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-test/description
+ Kernel support for testing USB Host Controller software
+endef
+
+$(eval $(call KernelPackage,usb-test))
+
+
+define KernelPackage/usbip
+ TITLE := USB-over-IP kernel support
+ KCONFIG:= \
+ CONFIG_USBIP_CORE \
+ CONFIG_USBIP_DEBUG=n
+ FILES:=$(LINUX_DIR)/drivers/usb/usbip/usbip-core.ko
+ AUTOLOAD:=$(call AutoProbe,usbip-core)
+ $(call AddDepends/usb)
+endef
+
+$(eval $(call KernelPackage,usbip))
+
+
+define KernelPackage/usbip-client
+ TITLE := USB-over-IP client driver
+ DEPENDS := +kmod-usbip
+ KCONFIG := CONFIG_USBIP_VHCI_HCD
+ FILES :=$(LINUX_DIR)/drivers/usb/usbip/vhci-hcd.ko
+ AUTOLOAD := $(call AutoProbe,vhci-hcd)
+ $(call AddDepends/usb)
+endef
+
+$(eval $(call KernelPackage,usbip-client))
+
+
+define KernelPackage/usbip-server
+$(call KernelPackage/usbip/Default)
+ TITLE := USB-over-IP host driver
+ DEPENDS := +kmod-usbip
+ KCONFIG := CONFIG_USBIP_HOST
+ FILES :=$(LINUX_DIR)/drivers/usb/usbip/usbip-host.ko
+ AUTOLOAD := $(call AutoProbe,usbip-host)
+ $(call AddDepends/usb)
+endef
+
+$(eval $(call KernelPackage,usbip-server))
+
+define KernelPackage/usb-chipidea
+ TITLE:=Host and device support for Chipidea controllers
+ DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget @TARGET_ath79 +kmod-usb-ehci +kmod-usb-phy-nop +kmod-usb-roles
+ KCONFIG:= \
+ CONFIG_EXTCON \
+ CONFIG_USB_CHIPIDEA \
+ CONFIG_USB_CHIPIDEA_GENERIC \
+ CONFIG_USB_CHIPIDEA_HOST=y \
+ CONFIG_USB_CHIPIDEA_UDC=y \
+ CONFIG_USB_CHIPIDEA_DEBUG=y
+ FILES:= \
+ $(LINUX_DIR)/drivers/extcon/extcon-core.ko \
+ $(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc.ko \
+ $(LINUX_DIR)/drivers/usb/common/ulpi.ko
+ AUTOLOAD:=$(call AutoLoad,39,ci_hdrc,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-chipidea/description
+ Kernel support for USB Chipidea controllers
+endef
+
+$(eval $(call KernelPackage,usb-chipidea))
+
+
+define KernelPackage/usb-chipidea2
+ TITLE:=Host and device support for Chipidea2 controllers
+ DEPENDS:=+kmod-usb-chipidea
+ KCONFIG:= \
+ CONFIG_EXTCON \
+ CONFIG_USB_CHIPIDEA \
+ CONFIG_USB_CHIPIDEA_HOST=y \
+ CONFIG_USB_CHIPIDEA_UDC=y \
+ CONFIG_USB_CHIPIDEA_DEBUG=y
+ FILES:= \
+ $(LINUX_DIR)/drivers/extcon/extcon-core.ko \
+ $(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc_usb2.ko
+ AUTOLOAD:=$(call AutoLoad,39,ci_hdrc_usb2,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-chipidea2/description
+ Kernel support for USB Chipidea controllers
+endef
+
+$(eval $(call KernelPackage,usb-chipidea2))
+
+
+define KernelPackage/usbmon
+ TITLE:=USB traffic monitor
+ KCONFIG:=CONFIG_USB_MON
+ $(call AddDepends/usb)
+ FILES:=$(LINUX_DIR)/drivers/usb/mon/usbmon.ko
+ AUTOLOAD:=$(call AutoProbe,usbmon)
+endef
+
+define KernelPackage/usbmon/description
+ Kernel support for USB traffic monitoring
+endef
+
+$(eval $(call KernelPackage,usbmon))
+
+XHCI_MODULES := xhci-pci xhci-plat-hcd
+XHCI_FILES := $(wildcard $(patsubst %,$(LINUX_DIR)/drivers/usb/host/%.ko,$(XHCI_MODULES)))
+XHCI_AUTOLOAD := $(patsubst $(LINUX_DIR)/drivers/usb/host/%.ko,%,$(XHCI_FILES))
+
+define KernelPackage/usb3
+ TITLE:=Support for USB3 controllers
+ DEPENDS:= \
+ +kmod-usb-xhci-hcd \
+ +TARGET_bcm53xx:kmod-usb-bcma \
+ +TARGET_bcm53xx:kmod-phy-bcm-ns-usb3 \
+ +TARGET_ramips_mt7621:kmod-usb-xhci-mtk \
+ +TARGET_mediatek:kmod-usb-xhci-mtk \
+ +TARGET_apm821xx_nand:kmod-usb-xhci-pci-renesas \
+ +TARGET_lantiq_xrx200:kmod-usb-xhci-pci-renesas \
+ +TARGET_mvebu_cortexa9:kmod-usb-xhci-pci-renesas
+ KCONFIG:= \
+ CONFIG_USB_PCI=y \
+ CONFIG_USB_XHCI_PCI \
+ CONFIG_USB_XHCI_PLATFORM
+ FILES:= \
+ $(XHCI_FILES)
+ AUTOLOAD:=$(call AutoLoad,54,$(XHCI_AUTOLOAD),1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb3/description
+ Kernel support for USB3 (XHCI) controllers
+endef
+
+$(eval $(call KernelPackage,usb3))
+
+
+define KernelPackage/usb-net2280
+ TITLE:=Support for NetChip 228x PCI USB peripheral controller
+ KCONFIG:= \
+ CONFIG_USB_PCI=y \
+ CONFIG_USB_NET2280
+ DEPENDS:=@PCI_SUPPORT +kmod-usb-gadget
+ FILES:=$(LINUX_DIR)/drivers/usb/gadget/udc/net2280.ko
+ AUTOLOAD:=$(call AutoLoad,46,net2280)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-net2280/description
+ Kernel support for NetChip 228x / PLX USB338x PCI USB peripheral controller.
+endef
+
+$(eval $(call KernelPackage,usb-net2280))
+
+define KernelPackage/usb-roles
+ TITLE:=USB Role Switch Library Module
+ KCONFIG:=CONFIG_USB_ROLE_SWITCH
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/usb/roles/roles.ko
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-roles/description
+ Support for USB Role Switch
+endef
+
+$(eval $(call KernelPackage,usb-roles))
+
+
+define KernelPackage/usb-xhci-hcd
+ TITLE:=xHCI HCD (USB 3.0) support
+ KCONFIG:= CONFIG_USB_XHCI_HCD
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/usb/host/xhci-hcd.ko
+ AUTOLOAD:=$(call AutoLoad,54,xhci-hcd,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-xhci-hcd/description
+ The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
+ "SuperSpeed" host controller hardware.
+endef
+
+$(eval $(call KernelPackage,usb-xhci-hcd))
+
+
+define KernelPackage/usb-xhci-mtk
+ TITLE:=xHCI support for MediaTek SoCs
+ DEPENDS:=+kmod-usb-xhci-hcd
+ KCONFIG:=CONFIG_USB_XHCI_MTK
+ HIDDEN:=1
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/host/xhci-mtk.ko@lt5.13 \
+ $(LINUX_DIR)/drivers/usb/host/xhci-mtk-hcd.ko@ge5.13
+ AUTOLOAD:=$(call AutoLoad,54,xhci-mtk@lt5.13 xhci-mtk-hcd@gt5.13,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-xhci-mtk/description
+ Kernel support for the xHCI host controller found in MediaTek SoCs.
+endef
+
+$(eval $(call KernelPackage,usb-xhci-mtk))
+
+
+define KernelPackage/usb-xhci-pci-renesas
+ TITLE:=Support for additional Renesas xHCI controller with firmware
+ KCONFIG:=CONFIG_USB_XHCI_PCI_RENESAS
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/usb/host/xhci-pci-renesas.ko
+ AUTOLOAD:=$(call AutoLoad,54,xhci-pci-renesas,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-xhci-pci-renesas/description
+ Kernel support for the Renesas xHCI controller with firmware. Make sure you have
+ the firwmare for the device and installed on your system for this device to work.
+endef
+
+$(eval $(call KernelPackage,usb-xhci-pci-renesas))
+
+
+define KernelPackage/chaoskey
+ SUBMENU:=$(USB_MENU)
+ TITLE:=Chaoskey hardware RNG support
+ DEPENDS:=+kmod-random-core
+ KCONFIG:=CONFIG_USB_CHAOSKEY
+ FILES:=$(LINUX_DIR)/drivers/usb/misc/chaoskey.ko
+ AUTOLOAD:=$(call AutoProbe,chaoskey)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/chaoskey/description
+ Kernel module for chaoskey, USB attached true random number generator
+endef
+
+$(eval $(call KernelPackage,chaoskey))
+