ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/package/network/utils/comgt/files/ncm.sh b/package/network/utils/comgt/files/ncm.sh
new file mode 100644
index 0000000..e9412b2
--- /dev/null
+++ b/package/network/utils/comgt/files/ncm.sh
@@ -0,0 +1,289 @@
+#!/bin/sh
+
+[ -n "$INCLUDE_ONLY" ] || {
+ . /lib/functions.sh
+ . ../netifd-proto.sh
+ init_proto "$@"
+}
+
+proto_ncm_init_config() {
+ no_device=1
+ available=1
+ proto_config_add_string "device:device"
+ proto_config_add_string ifname
+ proto_config_add_string apn
+ proto_config_add_string auth
+ proto_config_add_string username
+ proto_config_add_string password
+ proto_config_add_string pincode
+ proto_config_add_string delay
+ proto_config_add_string mode
+ proto_config_add_string pdptype
+ proto_config_add_boolean sourcefilter
+ proto_config_add_boolean delegate
+ proto_config_add_int profile
+ proto_config_add_defaults
+}
+
+proto_ncm_setup() {
+ local interface="$1"
+
+ local manufacturer initialize setmode connect finalize devname devpath ifpath
+
+ local device ifname apn auth username password pincode delay mode pdptype profile $PROTO_DEFAULT_OPTIONS
+ json_get_vars device ifname apn auth username password pincode delay mode pdptype sourcefilter delegate profile $PROTO_DEFAULT_OPTIONS
+
+ local context_type
+
+ [ "$metric" = "" ] && metric="0"
+
+ [ -n "$profile" ] || profile=1
+
+ pdptype=$(echo "$pdptype" | awk '{print toupper($0)}')
+ [ "$pdptype" = "IP" -o "$pdptype" = "IPV6" -o "$pdptype" = "IPV4V6" ] || pdptype="IP"
+
+ [ "$pdptype" = "IPV4V6" ] && context_type=3
+ [ -z "$context_type" -a "$pdptype" = "IPV6" ] && context_type=2
+ [ -n "$context_type" ] || context_type=1
+
+ [ -n "$ctl_device" ] && device=$ctl_device
+
+ [ -n "$device" ] || {
+ echo "No control device specified"
+ proto_notify_error "$interface" NO_DEVICE
+ proto_set_available "$interface" 0
+ return 1
+ }
+
+ device="$(readlink -f $device)"
+ [ -e "$device" ] || {
+ echo "Control device not valid"
+ proto_set_available "$interface" 0
+ return 1
+ }
+
+ [ -z "$ifname" ] && {
+ devname="$(basename "$device")"
+ case "$devname" in
+ 'ttyACM'*)
+ devpath="$(readlink -f /sys/class/tty/$devname/device)"
+ ifpath="$devpath/../*/net"
+ ;;
+ 'tty'*)
+ devpath="$(readlink -f /sys/class/tty/$devname/device)"
+ ifpath="$devpath/../../*/net"
+ ;;
+ *)
+ devpath="$(readlink -f /sys/class/usbmisc/$devname/device/)"
+ ifpath="$devpath/net"
+ ;;
+ esac
+ ifname="$(ls $(ls -1 -d $ifpath | head -n 1))"
+ }
+
+ [ -n "$ifname" ] || {
+ echo "The interface could not be found."
+ proto_notify_error "$interface" NO_IFACE
+ proto_set_available "$interface" 0
+ return 1
+ }
+
+ start=$(date +%s)
+ while true; do
+ manufacturer=$(gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk 'NF && $0 !~ /AT\+CGMI/ { sub(/\+CGMI: /,""); print tolower($1); exit; }')
+ [ "$manufacturer" = "error" ] && {
+ manufacturer=""
+ }
+ [ -n "$manufacturer" ] && {
+ break
+ }
+ [ -z "$delay" ] && {
+ break
+ }
+ sleep 1
+ elapsed=$(($(date +%s) - start))
+ [ "$elapsed" -gt "$delay" ] && {
+ break
+ }
+ done
+ [ -z "$manufacturer" ] && {
+ echo "Failed to get modem information"
+ proto_notify_error "$interface" GETINFO_FAILED
+ return 1
+ }
+
+ json_load "$(cat /etc/gcom/ncm.json)"
+ json_select "$manufacturer"
+ [ $? -ne 0 ] && {
+ echo "Unsupported modem"
+ proto_notify_error "$interface" UNSUPPORTED_MODEM
+ proto_set_available "$interface" 0
+ return 1
+ }
+
+ json_get_values initialize initialize
+ for i in $initialize; do
+ eval COMMAND="$i" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+ echo "Failed to initialize modem"
+ proto_notify_error "$interface" INITIALIZE_FAILED
+ return 1
+ }
+ done
+
+ [ -n "$pincode" ] && {
+ PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
+ echo "Unable to verify PIN"
+ proto_notify_error "$interface" PIN_FAILED
+ proto_block_restart "$interface"
+ return 1
+ }
+ }
+
+ json_get_values configure configure
+ echo "Configuring modem"
+ for i in $configure; do
+ eval COMMAND="$i" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+ echo "Failed to configure modem"
+ proto_notify_error "$interface" CONFIGURE_FAILED
+ return 1
+ }
+ done
+
+ [ -n "$mode" ] && {
+ json_select modes
+ json_get_var setmode "$mode"
+ [ -n "$setmode" ] && {
+ echo "Setting mode"
+ eval COMMAND="$setmode" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+ echo "Failed to set operating mode"
+ proto_notify_error "$interface" SETMODE_FAILED
+ return 1
+ }
+ }
+ json_select ..
+ }
+
+ echo "Starting network $interface"
+ json_get_vars connect
+ [ -n "$connect" ] && {
+ echo "Connecting modem"
+ eval COMMAND="$connect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+ echo "Failed to connect"
+ proto_notify_error "$interface" CONNECT_FAILED
+ return 1
+ }
+ }
+
+ json_get_vars finalize
+
+ echo "Setting up $ifname"
+ proto_init_update "$ifname" 1
+ proto_add_data
+ json_add_string "manufacturer" "$manufacturer"
+ proto_close_data
+ proto_send_update "$interface"
+
+ local zone="$(fw3 -q network "$interface" 2>/dev/null)"
+
+ [ "$pdptype" = "IP" -o "$pdptype" = "IPV4V6" ] && {
+ json_init
+ json_add_string name "${interface}_4"
+ json_add_string ifname "@$interface"
+ json_add_string proto "dhcp"
+ proto_add_dynamic_defaults
+ [ -n "$zone" ] && {
+ json_add_string zone "$zone"
+ }
+ json_close_object
+ ubus call network add_dynamic "$(json_dump)"
+ }
+
+ [ "$pdptype" = "IPV6" -o "$pdptype" = "IPV4V6" ] && {
+ json_init
+ json_add_string name "${interface}_6"
+ json_add_string ifname "@$interface"
+ json_add_string proto "dhcpv6"
+ json_add_string extendprefix 1
+ [ "$delegate" = "0" ] && json_add_boolean delegate "0"
+ [ "$sourcefilter" = "0" ] && json_add_boolean sourcefilter "0"
+ proto_add_dynamic_defaults
+ [ -n "$zone" ] && {
+ json_add_string zone "$zone"
+ }
+ json_close_object
+ ubus call network add_dynamic "$(json_dump)"
+ }
+
+ [ -n "$finalize" ] && {
+ eval COMMAND="$finalize" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+ echo "Failed to configure modem"
+ proto_notify_error "$interface" FINALIZE_FAILED
+ return 1
+ }
+ }
+}
+
+proto_ncm_teardown() {
+ local interface="$1"
+
+ local manufacturer disconnect
+
+ local device profile
+ json_get_vars device profile
+
+ [ -n "$ctl_device" ] && device=$ctl_device
+
+ [ -n "$device" ] || {
+ echo "No control device specified"
+ proto_notify_error "$interface" NO_DEVICE
+ proto_set_available "$interface" 0
+ return 1
+ }
+
+ device="$(readlink -f $device)"
+ [ -e "$device" ] || {
+ echo "Control device not valid"
+ proto_set_available "$interface" 0
+ return 1
+ }
+
+ [ -n "$profile" ] || profile=1
+
+ echo "Stopping network $interface"
+
+ json_load "$(ubus call network.interface.$interface status)"
+ json_select data
+ json_get_vars manufacturer
+ [ $? -ne 0 -o -z "$manufacturer" ] && {
+ # Fallback to direct detect, for proper handle device replug.
+ manufacturer=$(gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk 'NF && $0 !~ /AT\+CGMI/ { sub(/\+CGMI: /,""); print tolower($1); exit; }')
+ [ $? -ne 0 -o -z "$manufacturer" ] && {
+ echo "Failed to get modem information"
+ proto_notify_error "$interface" GETINFO_FAILED
+ return 1
+ }
+ json_add_string "manufacturer" "$manufacturer"
+ }
+
+ json_load "$(cat /etc/gcom/ncm.json)"
+ json_select "$manufacturer" || {
+ echo "Unsupported modem"
+ proto_notify_error "$interface" UNSUPPORTED_MODEM
+ return 1
+ }
+
+ json_get_vars disconnect
+ [ -n "$disconnect" ] && {
+ eval COMMAND="$disconnect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+ echo "Failed to disconnect"
+ proto_notify_error "$interface" DISCONNECT_FAILED
+ return 1
+ }
+ }
+
+ proto_init_update "*" 0
+ proto_send_update "$interface"
+}
+[ -n "$INCLUDE_ONLY" ] || {
+ add_protocol ncm
+}