diff --git a/scripts/mkits.sh b/scripts/mkits.sh
new file mode 100755
index 0000000..46ab5ee
--- /dev/null
+++ b/scripts/mkits.sh
@@ -0,0 +1,240 @@
+#!/bin/sh
+#
+# Licensed under the terms of the GNU GPL License version 2 or later.
+#
+# Author: Peter Tyser <ptyser@xes-inc.com>
+#
+# U-Boot firmware supports the booting of images in the Flattened Image
+# Tree (FIT) format.  The FIT format uses a device tree structure to
+# describe a kernel image, device tree blob, ramdisk, etc.  This script
+# creates an Image Tree Source (.its file) which can be passed to the
+# 'mkimage' utility to generate an Image Tree Blob (.itb file).  The .itb
+# file can then be booted by U-Boot (or other bootloaders which support
+# FIT images).  See doc/uImage.FIT/howto.txt in U-Boot source code for
+# additional information on FIT images.
+#
+
+usage() {
+	printf "Usage: %s -A arch -C comp -a addr -e entry" "$(basename "$0")"
+	printf " -v version -k kernel [-D name -n address -d dtb] -o its_file"
+
+	printf "\n\t-A ==> set architecture to 'arch'"
+	printf "\n\t-C ==> set compression type 'comp'"
+	printf "\n\t-c ==> set config name 'config'"
+	printf "\n\t-a ==> set load address to 'addr' (hex)"
+	printf "\n\t-e ==> set entry point to 'entry' (hex)"
+	printf "\n\t-f ==> set device tree compatible string"
+	printf "\n\t-i ==> include initrd Blob 'initrd'"
+	printf "\n\t-v ==> set kernel version to 'version'"
+	printf "\n\t-k ==> include kernel image 'kernel'"
+	printf "\n\t-D ==> human friendly Device Tree Blob 'name'"
+	printf "\n\t-n ==> fdt unit-address 'address'"
+	printf "\n\t-d ==> include Device Tree Blob 'dtb'"
+	printf "\n\t-r ==> include RootFS blob 'rootfs'"
+	printf "\n\t-H ==> specify hash algo instead of SHA1"
+	printf "\n\t-l ==> legacy mode character (@ etc otherwise -)"
+	printf "\n\t-o ==> create output file 'its_file'"
+	printf "\n\t-O ==> create config with dt overlay 'name:dtb'"
+	printf "\n\t-s ==> set FDT load address to 'addr' (hex)"
+	printf "\n\t\t(can be specified more than once)\n"
+	exit 1
+}
+
+REFERENCE_CHAR='-'
+FDTNUM=1
+ROOTFSNUM=1
+INITRDNUM=1
+HASH=sha1
+LOADABLES=
+DTOVERLAY=
+DTADDR=
+
+while getopts ":A:a:c:C:D:d:e:f:i:k:l:n:o:O:v:r:s:H:" OPTION
+do
+	case $OPTION in
+		A ) ARCH=$OPTARG;;
+		a ) LOAD_ADDR=$OPTARG;;
+		c ) CONFIG=$OPTARG;;
+		C ) COMPRESS=$OPTARG;;
+		D ) DEVICE=$OPTARG;;
+		d ) DTB=$OPTARG;;
+		e ) ENTRY_ADDR=$OPTARG;;
+		f ) COMPATIBLE=$OPTARG;;
+		i ) INITRD=$OPTARG;;
+		k ) KERNEL=$OPTARG;;
+		l ) REFERENCE_CHAR=$OPTARG;;
+		n ) FDTNUM=$OPTARG;;
+		o ) OUTPUT=$OPTARG;;
+		O ) DTOVERLAY="$DTOVERLAY ${OPTARG}";;
+		r ) ROOTFS=$OPTARG;;
+		s ) FDTADDR=$OPTARG;;
+		H ) HASH=$OPTARG;;
+		v ) VERSION=$OPTARG;;
+		* ) echo "Invalid option passed to '$0' (options:$*)"
+		usage;;
+	esac
+done
+
+# Make sure user entered all required parameters
+if [ -z "${ARCH}" ] || [ -z "${COMPRESS}" ] || [ -z "${LOAD_ADDR}" ] || \
+	[ -z "${ENTRY_ADDR}" ] || [ -z "${VERSION}" ] || [ -z "${KERNEL}" ] || \
+	[ -z "${OUTPUT}" ] || [ -z "${CONFIG}" ]; then
+	usage
+fi
+
+ARCH_UPPER=$(echo "$ARCH" | tr '[:lower:]' '[:upper:]')
+
+if [ -n "${COMPATIBLE}" ]; then
+	COMPATIBLE_PROP="compatible = \"${COMPATIBLE}\";"
+fi
+
+[ "$FDTADDR" ] && {
+	DTADDR="$FDTADDR"
+}
+
+# Conditionally create fdt information
+if [ -n "${DTB}" ]; then
+	FDT_NODE="
+		fdt${REFERENCE_CHAR}$FDTNUM {
+			description = \"${ARCH_UPPER} OpenWrt ${DEVICE} device tree blob\";
+			${COMPATIBLE_PROP}
+			data = /incbin/(\"${DTB}\");
+			type = \"flat_dt\";
+			${DTADDR:+load = <${DTADDR}>;}
+			arch = \"${ARCH}\";
+			compression = \"none\";
+			hash${REFERENCE_CHAR}1 {
+				algo = \"crc32\";
+			};
+			hash${REFERENCE_CHAR}2 {
+				algo = \"${HASH}\";
+			};
+		};
+"
+	FDT_PROP="fdt = \"fdt${REFERENCE_CHAR}$FDTNUM\";"
+fi
+
+if [ -n "${INITRD}" ]; then
+	INITRD_NODE="
+		initrd${REFERENCE_CHAR}$INITRDNUM {
+			description = \"${ARCH_UPPER} OpenWrt ${DEVICE} initrd\";
+			${COMPATIBLE_PROP}
+			data = /incbin/(\"${INITRD}\");
+			type = \"ramdisk\";
+			arch = \"${ARCH}\";
+			os = \"linux\";
+			hash${REFERENCE_CHAR}1 {
+				algo = \"crc32\";
+			};
+			hash${REFERENCE_CHAR}2 {
+				algo = \"${HASH}\";
+			};
+		};
+"
+	INITRD_PROP="ramdisk=\"initrd${REFERENCE_CHAR}${INITRDNUM}\";"
+fi
+
+
+if [ -n "${ROOTFS}" ]; then
+	dd if="${ROOTFS}" of="${ROOTFS}.pagesync" bs=4096 conv=sync
+	ROOTFS_NODE="
+		rootfs${REFERENCE_CHAR}$ROOTFSNUM {
+			description = \"${ARCH_UPPER} OpenWrt ${DEVICE} rootfs\";
+			${COMPATIBLE_PROP}
+			data = /incbin/(\"${ROOTFS}.pagesync\");
+			type = \"filesystem\";
+			arch = \"${ARCH}\";
+			compression = \"none\";
+			hash${REFERENCE_CHAR}1 {
+				algo = \"crc32\";
+			};
+			hash${REFERENCE_CHAR}2 {
+				algo = \"${HASH}\";
+			};
+		};
+"
+	LOADABLES="${LOADABLES:+$LOADABLES, }\"rootfs${REFERENCE_CHAR}${ROOTFSNUM}\""
+fi
+
+# add DT overlay blobs
+FDTOVERLAY_NODE=""
+OVCONFIGS=""
+[ "$DTOVERLAY" ] && for overlay in $DTOVERLAY ; do
+	overlay_blob=${overlay##*:}
+	ovname=${overlay%%:*}
+	ovnode="fdt-$ovname"
+	ovsize=$(wc -c "$overlay_blob" | awk '{print $1}')
+	echo "$ovname ($overlay_blob) : $ovsize" >&2
+	FDTOVERLAY_NODE="$FDTOVERLAY_NODE
+
+		$ovnode {
+			description = \"${ARCH_UPPER} OpenWrt ${DEVICE} device tree overlay $ovname\";
+			${COMPATIBLE_PROP}
+			data = /incbin/(\"${overlay_blob}\");
+			type = \"flat_dt\";
+			arch = \"${ARCH}\";
+			compression = \"none\";
+			hash${REFERENCE_CHAR}1 {
+				algo = \"crc32\";
+			};
+			hash${REFERENCE_CHAR}2 {
+				algo = \"${HASH}\";
+			};
+		};
+"
+	OVCONFIGS="$OVCONFIGS
+
+		$ovname {
+			description = \"OpenWrt ${DEVICE} overlay $ovname\";
+			fdt = \"$ovnode\";
+			${COMPATIBLE_PROP}
+		};
+	"
+done
+
+# Create a default, fully populated DTS file
+DATA="/dts-v1/;
+
+/ {
+	description = \"${ARCH_UPPER} OpenWrt FIT (Flattened Image Tree)\";
+	#address-cells = <1>;
+
+	images {
+		kernel${REFERENCE_CHAR}1 {
+			description = \"${ARCH_UPPER} OpenWrt Linux-${VERSION}\";
+			data = /incbin/(\"${KERNEL}\");
+			type = \"kernel\";
+			arch = \"${ARCH}\";
+			os = \"linux\";
+			compression = \"${COMPRESS}\";
+			load = <${LOAD_ADDR}>;
+			entry = <${ENTRY_ADDR}>;
+			hash${REFERENCE_CHAR}1 {
+				algo = \"crc32\";
+			};
+			hash${REFERENCE_CHAR}2 {
+				algo = \"$HASH\";
+			};
+		};
+${INITRD_NODE}
+${FDT_NODE}
+${FDTOVERLAY_NODE}
+${ROOTFS_NODE}
+	};
+
+	configurations {
+		default = \"${CONFIG}\";
+		${CONFIG} {
+			description = \"OpenWrt ${DEVICE}\";
+			kernel = \"kernel${REFERENCE_CHAR}1\";
+			${FDT_PROP}
+			${LOADABLES:+loadables = ${LOADABLES};}
+			${COMPATIBLE_PROP}
+			${INITRD_PROP}
+		};
+		${OVCONFIGS}
+	};
+};"
+
+# Write .its file to disk
+echo "$DATA" > "${OUTPUT}"