ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/target/linux/ath79/dts/ar1022_iodata_wn-ag300dgr.dts b/target/linux/ath79/dts/ar1022_iodata_wn-ag300dgr.dts
new file mode 100644
index 0000000..e1d5f2d
--- /dev/null
+++ b/target/linux/ath79/dts/ar1022_iodata_wn-ag300dgr.dts
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "iodata,wn-ag300dgr", "qca,ar9344";
+ model = "I-O DATA WN-AG300DGR";
+
+ aliases {
+ led-boot = &led_router;
+ led-failsafe = &led_router;
+ led-running = &led_router;
+ led-upgrade = &led_router;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_router: router {
+ label = "green:router";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ children {
+ label = "green:children";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ eco {
+ label = "green:eco";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ notification {
+ label = "amber:notification";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ eco {
+ label = "eco";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ debounce-interval = <60>;
+ };
+
+ router {
+ label = "router";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+
+ auto {
+ label = "auto";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+
+ children {
+ label = "children";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x030000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x030000 0x010000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x040000 0xf10000>;
+ };
+
+ partition@f50000 {
+ label = "manufacture";
+ reg = <0xf50000 0x40000>;
+ read-only;
+ };
+
+ partition@f90000 {
+ label = "backup";
+ reg = <0xf90000 0x10000>;
+ read-only;
+ };
+
+ partition@fa0000 {
+ label = "storage";
+ reg = <0xfa0000 0x50000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x07a00000 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x000000fe /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x06000000 0x00000101 0x00001616>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-gmac0 = <1>;
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ qca,no-eeprom;
+};
diff --git a/target/linux/ath79/dts/ar1022_sitecom_wlr-7100.dts b/target/linux/ath79/dts/ar1022_sitecom_wlr-7100.dts
new file mode 100644
index 0000000..d008dd5
--- /dev/null
+++ b/target/linux/ath79/dts/ar1022_sitecom_wlr-7100.dts
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Sitecom WLR-7100 (X7 AC1200)";
+ compatible = "sitecom,wlr-7100", "qca,ar9344";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wlan2g {
+ label = "2.4GHz";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wlan5g {
+ label = "5GHz";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ ops {
+ label = "white:ops";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "amber:power";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "blue:wlan2g";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x06000000 0x00000101 0x00001616>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-gmac0 = <1>;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x87a00000 /* PORT0 PAD Mode */
+ 0x0c 0x01000000 /* PORT6 PAD Mode */
+ 0x10 0x80000000 /* PWS_REG_VALUE */
+ 0x7c 0x000000fe /* PORT0_STATUS */
+ 0x94 0x000000fe /* PORT6_STATUS */
+ >;
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0x0000 0 0 0 0>;
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x030000>;
+ read-only;
+ };
+
+ uenv: partition@30000 {
+ label = "u-boot-env";
+ reg = <0x030000 0x010000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x040000 0x750000>;
+ };
+
+ partition@790000 {
+ label = "backup";
+ reg = <0x790000 0x010000>;
+ read-only;
+ };
+
+ partition@7a0000 {
+ label = "storage";
+ reg = <0x7a0000 0x050000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ qca,no-eeprom;
+};
diff --git a/target/linux/ath79/dts/ar7100.dtsi b/target/linux/ath79/dts/ar7100.dtsi
new file mode 100644
index 0000000..a9aabaf
--- /dev/null
+++ b/target/linux/ath79/dts/ar7100.dtsi
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ath79.dtsi"
+
+/ {
+ compatible = "qca,ar7100";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips24Kc";
+ clocks = <&pll ATH79_CLK_CPU>;
+ reg = <0>;
+ };
+ };
+
+ ahb {
+ apb {
+ ddr_ctrl: memory-controller@18000000 {
+ compatible = "qca,ar7100-ddr-controller";
+ reg = <0x18000000 0x100>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ uart: uart@18020000 {
+ compatible = "ns16550a";
+ reg = <0x18020000 0x20>;
+ interrupts = <3>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "uart";
+
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ no-loopback-test;
+ };
+
+ usb_phy: usb-phy@18030000 {
+ compatible = "qca,ar7100-usb-phy";
+ reg = <0x18030000 0x10>;
+
+ reset-names = "usb-phy", "usb-host", "usb-ohci-dll";
+ resets = <&rst 4>, <&rst 5>, <&rst 6>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ gpio: gpio@18040000 {
+ compatible = "qca,ar7100-gpio";
+ reg = <0x18040000 0x30>;
+ interrupts = <2>;
+
+ ngpios = <16>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pll: pll-controller@18050000 {
+ compatible = "qca,ar7100-pll", "syscon";
+ reg = <0x18050000 0x20>;
+
+ clock-names = "ref";
+ /* The board must provides the ref clock */
+
+ #clock-cells = <1>;
+ clock-output-names = "cpu", "ddr", "ahb";
+ };
+
+ wdt: wdt@18060008 {
+ compatible = "qca,ar7130-wdt";
+ reg = <0x18060008 0x8>;
+
+ interrupts = <4>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "wdt";
+ };
+
+ pci_intc: interrupt-controller@18060018 {
+ compatible = "qca,ar7100-misc-intc";
+ reg = <0x18060018 0x4>;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ rst: reset-controller@18060024 {
+ compatible = "qca,ar7100-reset";
+ reg = <0x18060024 0x4>;
+
+ #reset-cells = <1>;
+ };
+
+ pcie0: pcie-controller@17010000 {
+ compatible = "qca,ar7100-pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0x0>;
+ reg = <0x17010000 0x100>;
+ reg-names = "cfg_base";
+ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000 /* pci memory */
+ 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
+
+ interrupt-parent = <&pci_intc>;
+ interrupts = <4>;
+
+ #interrupt-cells = <1>;
+
+ interrupt-map-mask = <0xf800 0 0 0>;
+ interrupt-map = <0x8800 0 0 0 &pci_intc 0
+ 0x9000 0 0 0 &pci_intc 1
+ 0x9800 0 0 0 &pci_intc 2>;
+
+ status = "disabled";
+ };
+ };
+ };
+
+ usb2: usb@1b000000 {
+ compatible = "generic-ehci";
+ reg = <0x1b000000 0x1000>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <3>;
+
+ phy-names = "usb-phy";
+ phys = <&usb_phy>;
+
+ has-synopsys-hc-bug;
+
+ status = "disabled";
+ };
+
+ usb1: usb@1c000000 {
+ compatible = "generic-ohci";
+ reg = <0x1c000000 0x1000>;
+
+ interrupt-parent = <&miscintc>;
+ interrupts = <6>;
+
+ phy-names = "usb-phy";
+ phys = <&usb_phy>;
+
+ status = "disabled";
+ };
+
+ spi: spi@1f000000 {
+ compatible = "qca,ar7100-spi";
+ reg = <0x1f000000 0x10>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "ahb";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+};
+
+&cpuintc {
+ qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+ <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+};
+
+&miscintc {
+ compatible = "qca,ar7100-misc-intc";
+};
+
+ð0 {
+ compatible = "qca,ar7100-eth", "syscon";
+ reg = <0x19000000 0x200
+ 0x18070000 0x4>;
+
+ pll-data = <0x00110000 0x00001099 0x00991099>;
+ pll-reg = <0x4 0x10 17>;
+ pll-handle = <&pll>;
+ phy-mode = "rgmii";
+
+ resets = <&rst 9>;
+ reset-names = "mac";
+ qca,mac-idx = <0>;
+};
+
+&mdio1 {
+ builtin-switch;
+};
+
+ð1 {
+ compatible = "qca,ar7100-eth", "syscon";
+ reg = <0x1a000000 0x200
+ 0x18070004 0x4>;
+
+ pll-data = <0x00110000 0x00001099 0x00991099>;
+ pll-reg = <0x4 0x14 19>;
+ pll-handle = <&pll>;
+
+ phy-mode = "rgmii";
+
+ resets = <&rst 13>;
+ reset-names = "mac";
+ qca,mac-idx = <1>;
+};
diff --git a/target/linux/ath79/dts/ar7100_mikrotik_routerboard-4xx.dtsi b/target/linux/ath79/dts/ar7100_mikrotik_routerboard-4xx.dtsi
new file mode 100644
index 0000000..c6cbe2f
--- /dev/null
+++ b/target/linux/ath79/dts/ar7100_mikrotik_routerboard-4xx.dtsi
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-1.0-or-later OR MIT
+
+#include "ar7100.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_user;
+ led-failsafe = &led_user;
+ led-running = &led_user;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_user: user {
+ label = "yellow:user";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led1 {
+ label = "green:led1";
+ gpios = <&cpld_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led2 {
+ label = "green:led2";
+ gpios = <&cpld_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led3 {
+ label = "green:led3";
+ gpios = <&cpld_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led4 {
+ label = "green:led4";
+ gpios = <&cpld_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led5 {
+ label = "green:led5";
+ gpios = <&cpld_gpio 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio {
+ ngpios = <31>;
+ gpio-line-names =
+ "", "", "", "", "LED", "RDY", "", "MDC",
+ "MDIO", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ compatible = "mikrotik,rb4xx-spi";
+
+ flash@0 {
+ compatible = "pm25lv512", "jedec,spi-nor";
+
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "mikrotik,routerboot-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "routerboot1";
+ reg = <0x0 0x0>;
+ read-only;
+ };
+
+ hard_config {
+ label = "hard_config";
+ read-only;
+ };
+
+ bios {
+ label = "bios";
+ size = <0x1000>;
+ read-only;
+ };
+
+ routerboot2 {
+ label = "routerboot2";
+ read-only;
+ };
+
+ soft_config {
+ label = "soft_config";
+ };
+ };
+ };
+
+ cpld@1 {
+ compatible = "mikrotik,rb4xx-cpld";
+
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+
+ cpld_gpio: gpio {
+ compatible = "mikrotik,rb4xx-gpio";
+
+ base = <32>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "LED1", "LED2", "LED3", "LED4",
+ "FAN", "ALE", "CLE", "nCE",
+ "LED5";
+ };
+
+ nand {
+ compatible = "mikrotik,rb4xx-nand";
+
+ gpios = <&cpld_gpio 5 GPIO_ACTIVE_HIGH>, // ALE
+ <&cpld_gpio 6 GPIO_ACTIVE_HIGH>, // CLE
+ <&cpld_gpio 7 GPIO_ACTIVE_HIGH>, // nCE
+ <&gpio 5 GPIO_ACTIVE_HIGH>; // RDY
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "booter";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "kernel";
+ reg = <0x0040000 0x0800000>;
+ };
+
+ partition@840000 {
+ label = "ubi";
+ reg = <0x0840000 0x77c0000>;
+ };
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy0>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7161_adtran_bsap1800-v2.dts b/target/linux/ath79/dts/ar7161_adtran_bsap1800-v2.dts
new file mode 100644
index 0000000..d1339c5
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_adtran_bsap1800-v2.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7161_adtran_bsap1880.dtsi"
+
+/ {
+ model = "Adtran/Bluesocket BSAP-1800 v2";
+ compatible = "adtran,bsap1800-v2", "qca,ar7161";
+};
diff --git a/target/linux/ath79/dts/ar7161_adtran_bsap1840.dts b/target/linux/ath79/dts/ar7161_adtran_bsap1840.dts
new file mode 100644
index 0000000..3237b8f
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_adtran_bsap1840.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7161_adtran_bsap1880.dtsi"
+
+/ {
+ model = "Adtran/Bluesocket BSAP-1840";
+ compatible = "adtran,bsap1840", "qca,ar7161";
+};
diff --git a/target/linux/ath79/dts/ar7161_adtran_bsap1880.dtsi b/target/linux/ath79/dts/ar7161_adtran_bsap1880.dtsi
new file mode 100644
index 0000000..5b4b6e3
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_adtran_bsap1880.dtsi
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7100.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_yellow;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_yellow;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan5g {
+ label = "green:wifi5g";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan2g {
+ label = "green:wifi2g";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_status_green: status_green {
+ label = "green:status";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_yellow: status_yellow {
+ label = "yellow:status";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x1>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy0>;
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ecoscentric,redboot-fis-partitions";
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar7161_aruba_ap-105.dts b/target/linux/ath79/dts/ar7161_aruba_ap-105.dts
new file mode 100644
index 0000000..e242363
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_aruba_ap-105.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7100.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "aruba,ap-105", "qca,ar7161";
+ model = "Aruba AP-105";
+
+ chosen {
+ bootargs = "console=ttyS0,9600";
+ };
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ label-mac-device = ð0;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ panic-indicator;
+ };
+
+ wifi_2g_red {
+ label = "red:wlan2g";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi_5g_red {
+ label = "red:wlan5g";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wifi_2g_green {
+ label = "green:wlan2g";
+ gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi_5g_green {
+ label = "green:wlan5g";
+ gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+
+ sda-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ scl-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tpm@29 {
+ compatible = "atmel,at97sc3203s";
+ reg = <0x29>;
+
+ /* triggering it, will also kill system */
+ reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ ath9k0: wifi@0,11 { /* 2.4 GHz */
+ compatible = "pci168c,0029";
+ mtd-mac-address = <&hwinfo 0x1c>;
+ mtd-mac-address-increment = <1>;
+ reg = <0x8800 0 0 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ ath9k1: wifi@0,12 { /* 5 GHz */
+ compatible = "pci168c,0029";
+ mtd-mac-address = <&hwinfo 0x1c>;
+ mtd-mac-address-increment = <2>;
+ reg = <0x9000 0 0 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x1>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ mtd-mac-address = <&hwinfo 0x1c>;
+
+ pll-data = <0x00110000 0x00001099 0x00991099>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x40000 0xfa0000>;
+ compatible = "denx,uimage";
+ };
+
+ hwinfo: partition@fe0000 {
+ label = "hwinfo";
+ reg = <0xfe0000 0x10000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ label = "u-boot-env";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar7161_buffalo_wzr-600dhp.dts b/target/linux/ath79/dts/ar7161_buffalo_wzr-600dhp.dts
new file mode 100644
index 0000000..6ef4376
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_buffalo_wzr-600dhp.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7161_buffalo_wzr-hp-ag300h.dtsi"
+
+/ {
+ compatible = "buffalo,wzr-600dhp", "qca,ar7161";
+ model = "Buffalo WZR-600DHP";
+};
diff --git a/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts b/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts
new file mode 100644
index 0000000..2e32af5
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7161_buffalo_wzr-hp-ag300h.dtsi"
+
+/ {
+ compatible = "buffalo,wzr-hp-ag300h", "qca,ar7161";
+ model = "Buffalo WZR-HP-AG300H";
+};
diff --git a/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dtsi b/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dtsi
new file mode 100644
index 0000000..109ed0c
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dtsi
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7100.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_diag;
+ led-failsafe = &led_diag;
+ led-upgrade = &led_diag;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_diag: diag {
+ label = "red:diag";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ band2g_a {
+ label = "amber:band2g";
+ gpios = <&ath9k0 1 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "green:usb";
+ gpios = <&ath9k0 3 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&usb_ohci_port>, <&usb_ehci_port>;
+ linux,default-trigger = "usbport";
+ };
+
+ band2g_g {
+ label = "green:band2g";
+ gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ band5g_g {
+ label = "green:band5g";
+ gpios = <&ath9k1 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ router {
+ label = "green:router";
+ gpios = <&ath9k1 3 GPIO_ACTIVE_LOW>;
+ };
+
+ movie_engine {
+ label = "blue:movie_engine";
+ gpios = <&ath9k1 4 GPIO_ACTIVE_LOW>;
+ };
+
+ band5g_a {
+ label = "amber:band5g";
+ gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ usb {
+ linux,code = <BTN_2>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ aoss {
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ router_auto {
+ linux,code = <BTN_6>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ router_off {
+ linux,code = <BTN_5>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ movie_engine {
+ linux,code = <BTN_7>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_usb_power {
+ gpio-export,name = "buffalo:power:usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ flash {
+ compatible = "mtd-concat";
+
+ devices = <&flash0 &flash1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x0040000 0x0010000>;
+ read-only;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x0050000 0x0010000>;
+ read-only;
+ };
+
+ partition@60000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x0060000 0x1f90000>;
+ };
+
+ partition@1ff0000 {
+ label = "user_property";
+ reg = <0x1ff0000 0x0010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ usb_ohci_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ usb_ehci_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ ath9k0: wifi@0,11 {
+ compatible = "pci168c,0029";
+ reg = <0x8800 0 0 0 0>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ ath9k1: wifi@0,12 {
+ compatible = "pci168c,0029";
+ reg = <0x9000 0 0 0 0>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&spi {
+ status = "okay";
+
+ cs-gpios = <0>, <0>;
+
+ flash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+ };
+
+ flash1: flash@1 {
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x120c>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x520c>;
+ mtd-mac-address-increment = <1>;
+
+ phy-handle = <&phy4>;
+};
diff --git a/target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts b/target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts
new file mode 100644
index 0000000..f2809f0
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7100.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dir-825-b1", "qca,ar7161";
+ model = "D-Link DIR825B1";
+
+ aliases {
+ led-boot = &led_power_orange;
+ led-failsafe = &led_power_orange;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_orange;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "blue:usb";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&usb_ohci_port>, <&usb_ehci_port>;
+ linux,default-trigger = "usbport";
+ };
+
+ led_power_orange: power_orange {
+ label = "orange:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_power_blue: power_blue {
+ label = "blue:power";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "blue:wps";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ planet_orange {
+ label = "orange:planet";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ planet_blue {
+ label = "blue:planet";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan2g {
+ label = "blue:wlan2g";
+ gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g {
+ label = "blue:wlan5g";
+ gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ rtl8366s {
+ compatible = "realtek,rtl8366s";
+ gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ realtek,initvals = <0x06 0x0108>;
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ phy-mask = <0x10>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+ };
+ };
+};
+
+&usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ usb_ohci_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ usb_ehci_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+
+ ath9k0: wifi@0,11 {
+ compatible = "pci168c,0029";
+ reg = <0x8800 0 0 0 0>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ ath9k1: wifi@0,12 {
+ compatible = "pci168c,0029";
+ reg = <0x9000 0 0 0 0>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "config";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0x610000>;
+ };
+
+ partition@660000 {
+ label = "caldata";
+ reg = <0x660000 0x010000>;
+ read-only;
+ };
+
+ partition@670000 {
+ label = "unknown";
+ reg = <0x670000 0x190000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x11110000 0x00001099 0x00991099>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x11110000 0x00001099 0x00991099>;
+
+ phy-handle = <&phy4>;
+};
diff --git a/target/linux/ath79/dts/ar7161_jjplus_ja76pf2.dts b/target/linux/ath79/dts/ar7161_jjplus_ja76pf2.dts
new file mode 100644
index 0000000..826b45f
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_jjplus_ja76pf2.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7100.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "jjPlus JA76PF2";
+ compatible = "jjplus,ja76pf2", "qca,ar7161";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_d2;
+ led-failsafe = &led_d2;
+ led-running = &led_d2;
+ led-upgrade = &led_d2;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_d2: d2 {
+ label = "green:d2";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ d3 {
+ label = "green:d3";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ d4 {
+ label = "green:d4";
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ sw1 {
+ label = "sw1";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ sw2 {
+ label = "sw2";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x1>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy0>;
+};
+
+ð1 {
+ status = "okay";
+
+ phy-handle = <&phy4>;
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ecoscentric,redboot-fis-partitions";
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar7161_meraki_mr16.dts b/target/linux/ath79/dts/ar7161_meraki_mr16.dts
new file mode 100644
index 0000000..afbf1e3
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_meraki_mr16.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7100.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "meraki,mr16", "qca,ar7161";
+ model = "Meraki MR16";
+
+ aliases {
+ led-boot = &led_power_orange;
+ led-failsafe = &led_power_orange;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_orange;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi1 {
+ label = "green:wifi1";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi2 {
+ label = "green:wifi2";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi3 {
+ label = "green:wifi3";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi4 {
+ label = "green:wifi4";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_orange: power_orange {
+ label = "orange:power";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ panic-indicator;
+ };
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ ath9k0: wifi@0,11 { /* 2.4 GHz */
+ compatible = "pci168c,0029";
+ reg = <0x8800 0 0 0 0>;
+ qca,no-eeprom;
+ mtd-mac-address = <&config 0x66>;
+ mtd-mac-address-increment = <1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ ath9k1: wifi@0,12 { /* 5 GHz */
+ compatible = "pci168c,0029";
+ reg = <0x9000 0 0 0 0>;
+ qca,no-eeprom;
+ mtd-mac-address = <&config 0x66>;
+ mtd-mac-address-increment = <2>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x1>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ mtd-mac-address = <&config 0x66>;
+
+ pll-data = <0x00110000 0x00001099 0x00991099>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x40000>;
+ read-only;
+ };
+
+ config: partition@80000 {
+ label = "config";
+ reg = <0x80000 0x20000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "firmware";
+ reg = <0xa0000 0xf40000>;
+ compatible = "denx,uimage";
+ };
+
+ partition@fe0000 {
+ label = "art";
+ reg = <0xfe0000 0x20000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar7161_mikrotik_routerboard-493g.dts b/target/linux/ath79/dts/ar7161_mikrotik_routerboard-493g.dts
new file mode 100644
index 0000000..23c1b63
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_mikrotik_routerboard-493g.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-1.0-or-later OR MIT
+
+#include "ar7100_mikrotik_routerboard-4xx.dtsi"
+
+/ {
+ compatible = "mikrotik,routerboard-493g", "qca,ar7161";
+ model = "MikroTik RouterBOARD 493G";
+
+ aliases {
+ mdio-gpio0 = &mdio_gpio0;
+ };
+};
+
+&spi {
+ sdcard: mmc-slot@2 {
+ compatible = "mmc-spi-slot";
+
+ reg = <2>;
+ spi-max-frequency = <25000000>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ phy-handle = <&gpio_phy0>;
+
+ mdio_gpio0: mdio-gpio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>, // MDC
+ <&gpio 8 GPIO_ACTIVE_HIGH>; // MDIO
+
+ gpio_phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr.dtsi b/target/linux/ath79/dts/ar7161_netgear_wndr.dtsi
new file mode 100644
index 0000000..c7e8363
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_netgear_wndr.dtsi
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7100.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+ aliases {
+ led-boot = &led_power_orange;
+ led-failsafe = &led_power_orange;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_orange;
+ label-mac-device = ð0;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <40000000>;
+ };
+
+ reset-leds {
+ compatible = "reset-leds";
+
+ usb_led {
+ label = "green:usb";
+ resets = <&rst 12>;
+ trigger-sources = <&usb_ohci_port>, <&usb_ehci_port>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "orange:wps";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_orange: power_orange {
+ label = "orange:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wps_green {
+ label = "green:wps";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_green {
+ label = "green:wan";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ wlan5g {
+ label = "blue:wlan5g";
+ gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ rtl8366s {
+ compatible = "realtek,rtl8366s";
+
+ gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ phy-mask = <0x10>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ usb_ohci_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ usb_ehci_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ ath9k0: wifi@0,11 {
+ compatible = "pci168c,0029";
+ reg = <0x8800 0 0 0 0>;
+ mtd-mac-address = <&art 0x0>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ /* all WNDR3700 variants have four antennae dedicated
+ * to the 2.4GHz radio. Two antennae are available for
+ * each chain. The following configuration is the
+ * default setting which taken from the vendor's wifi
+ * code for that radio.
+ *
+ * All possible options [GPIO6,GPIO7,GPIO8,GPIO9]:
+ * [0,1,0,1], [0,1,1,0], [1,0,0,1], [1,0,1,0]
+ */
+ antenna-demux {
+ gpio-hog;
+ line-name = "fixed antenna group 1";
+ gpios = <6 GPIO_ACTIVE_LOW>,
+ <7 GPIO_ACTIVE_HIGH>,
+ <8 GPIO_ACTIVE_LOW>,
+ <9 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+ };
+
+ ath9k1: wifi@0,12 {
+ compatible = "pci168c,0029";
+ reg = <0x9000 0 0 0 0>;
+ mtd-mac-address = <&art 0xc>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x11110000 0x00001099 0x00991099>;
+
+ mtd-mac-address = <&art 0x00>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x11110000 0x00001099 0x00991099>;
+
+ mtd-mac-address = <&art 0x06>;
+
+ phy-handle = <&phy4>;
+};
diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr3700-v2.dts b/target/linux/ath79/dts/ar7161_netgear_wndr3700-v2.dts
new file mode 100644
index 0000000..6d78c01
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_netgear_wndr3700-v2.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7161_netgear_wndr.dtsi"
+
+/ {
+ compatible = "netgear,wndr3700-v2", "qca,ar7161";
+ model = "Netgear WNDR3700 v2";
+};
+
+&partitions {
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x050000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "u-boot-env";
+ reg = <0x050000 0x020000>;
+ };
+
+ partition@70000 {
+ label = "firmware";
+ reg = <0x070000 0xf80000>;
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <0x33373031>;
+ openwrt,ih-type = <IH_TYPE_FILESYSTEM>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr3700.dts b/target/linux/ath79/dts/ar7161_netgear_wndr3700.dts
new file mode 100644
index 0000000..ad29d25
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_netgear_wndr3700.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7161_netgear_wndr.dtsi"
+
+/ {
+ compatible = "netgear,wndr3700", "qca,ar7161";
+ model = "Netgear WNDR3700";
+};
+
+&partitions {
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x050000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "u-boot-env";
+ reg = <0x050000 0x020000>;
+ };
+
+ partition@70000 {
+ label = "firmware";
+ reg = <0x070000 0x780000>;
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <0x33373030>;
+ openwrt,ih-type = <IH_TYPE_FILESYSTEM>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+};
+
+&ath9k1 {
+ /* The original WNDR3700(v1) variant have four antennae dedicated
+ * to the 5GHz radio as well. Again, two antennae are available for
+ * each chain to switch between. The following configuration is the
+ * default setting which taken from the vendor's wifi
+ * code for that radio.
+ *
+ * All possible options [GPIO6,GPIO7,GPIO8,GPIO9]:
+ * [0,1,0,1], [0,1,1,0], [1,0,0,1], [1,0,1,0]
+ */
+ antenna-demux {
+ gpio-hog;
+ line-name = "fixed antenna group 2";
+ gpios = <6 GPIO_ACTIVE_LOW>,
+ <7 GPIO_ACTIVE_HIGH>,
+ <8 GPIO_ACTIVE_HIGH>,
+ <9 GPIO_ACTIVE_LOW>;
+ output-high;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts b/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts
new file mode 100644
index 0000000..80b2549
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7161_netgear_wndr.dtsi"
+
+/ {
+ compatible = "netgear,wndr3800", "qca,ar7161";
+ model = "Netgear WNDR3800";
+};
+
+&partitions {
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x050000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "u-boot-env";
+ reg = <0x050000 0x020000>;
+ read-only;
+ };
+
+ partition@70000 {
+ label = "firmware";
+ reg = <0x070000 0xf80000>;
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <0x33373031>;
+ openwrt,ih-type = <IH_TYPE_FILESYSTEM>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr3800ch.dts b/target/linux/ath79/dts/ar7161_netgear_wndr3800ch.dts
new file mode 100644
index 0000000..cc51aca
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_netgear_wndr3800ch.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7161_netgear_wndr.dtsi"
+
+/ {
+ compatible = "netgear,wndr3800ch", "qca,ar7161";
+ model = "Netgear WNDR3800CH";
+};
+
+&partitions {
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x050000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "u-boot-env";
+ reg = <0x050000 0x020000>;
+ read-only;
+ };
+
+ partition@70000 {
+ label = "firmware";
+ reg = <0x070000 0xf80000>;
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <0x33373031>;
+ openwrt,ih-type = <IH_TYPE_FILESYSTEM>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+};
+
diff --git a/target/linux/ath79/dts/ar7161_netgear_wndrmac-v1.dts b/target/linux/ath79/dts/ar7161_netgear_wndrmac-v1.dts
new file mode 100644
index 0000000..8604414
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_netgear_wndrmac-v1.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7161_netgear_wndr.dtsi"
+
+/ {
+ compatible = "netgear,wndrmac-v1", "qca,ar7161";
+ model = "Netgear WNDRMAC v1";
+};
+
+&partitions {
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x050000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "u-boot-env";
+ reg = <0x050000 0x020000>;
+ };
+
+ partition@70000 {
+ label = "firmware";
+ reg = <0x070000 0xf80000>;
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <0x33373031>;
+ openwrt,ih-type = <IH_TYPE_FILESYSTEM>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7161_netgear_wndrmac-v2.dts b/target/linux/ath79/dts/ar7161_netgear_wndrmac-v2.dts
new file mode 100644
index 0000000..bebd96c
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_netgear_wndrmac-v2.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7161_netgear_wndr.dtsi"
+
+/ {
+ compatible = "netgear,wndrmac-v2", "qca,ar7161";
+ model = "Netgear WNDRMAC v2";
+};
+
+&partitions {
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x050000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "u-boot-env";
+ reg = <0x050000 0x020000>;
+ read-only;
+ };
+
+ partition@70000 {
+ label = "firmware";
+ reg = <0x070000 0xf80000>;
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <0x33373031>;
+ openwrt,ih-type = <IH_TYPE_FILESYSTEM>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7161_siemens_ws-ap3610.dts b/target/linux/ath79/dts/ar7161_siemens_ws-ap3610.dts
new file mode 100644
index 0000000..9eaf5aa
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_siemens_ws-ap3610.dts
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7100.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "siemens,ws-ap3610", "qca,ar7161";
+ model = "Siemens WS-AP3610";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_red;
+ label-mac-device = ð0;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: led_power_green {
+ label = "green:power";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_red: led_power_red {
+ label = "red:power";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wlan5_blue {
+ label = "blue:wlan5";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_wlan5_green {
+ label = "green:wlan5";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wlan2_blue {
+ label = "blue:wlan2";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ led_wlan2_green {
+ label = "green:wlan2";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ /*
+ * When the compatible-is missing, PHY autodetection
+ * is performed, but the PHY-ID reads all 0xff.
+ *
+ * Linux does not create the device in this case,
+ * and the reset is never even de-asserted.
+ */
+ compatible = "ethernet-phy-id0143.bca2",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+
+ resets = <&rst 8>;
+ reset-names = "phy";
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy0>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-bak";
+ reg = <0x40000 0x40000>;
+ read-only;
+ };
+
+ partition@80000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x80000 0xe00000>;
+ };
+
+ partition@e80000 {
+ label = "cfg1";
+ reg = <0xe80000 0x40000>;
+ read-only;
+ };
+
+ partition@ec0000 {
+ label = "cfg2";
+ reg = <0xec0000 0x40000>;
+ read-only;
+ };
+
+ partition@f00000 {
+ label = "nvram1";
+ reg = <0xf00000 0x40000>;
+ read-only;
+ };
+
+ partition@f40000 {
+ label = "nvram2";
+ reg = <0xf40000 0x40000>;
+ read-only;
+ };
+
+ partition@f80000 {
+ label = "rsvd1";
+ reg = <0xf80000 0x40000>;
+ read-only;
+ };
+
+ partition@fc0000 {
+ label = "rsvd2";
+ reg = <0xfc0000 0x40000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar7161_ubnt_routerstation-pro.dts b/target/linux/ath79/dts/ar7161_ubnt_routerstation-pro.dts
new file mode 100644
index 0000000..87ac9df
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_ubnt_routerstation-pro.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7161_ubnt_routerstation.dtsi"
+
+/ {
+ compatible = "ubnt,routerstation-pro", "qca,ar7161";
+ model = "Ubiquiti RouterStation Pro";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+ð0 {
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+};
+
+ð1 {
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
diff --git a/target/linux/ath79/dts/ar7161_ubnt_routerstation.dts b/target/linux/ath79/dts/ar7161_ubnt_routerstation.dts
new file mode 100644
index 0000000..012fef6
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_ubnt_routerstation.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7161_ubnt_routerstation.dtsi"
+
+/ {
+ compatible = "ubnt,routerstation", "qca,ar7161";
+ model = "Ubiquiti RouterStation";
+};
+
+ð0 {
+ phy-mode = "mii";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+};
+
+ð1 {
+ phy-mode = "rmii";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7161_ubnt_routerstation.dtsi b/target/linux/ath79/dts/ar7161_ubnt_routerstation.dtsi
new file mode 100644
index 0000000..116bc9c
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_ubnt_routerstation.dtsi
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7100.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_rf;
+ led-failsafe = &led_rf;
+ led-running = &led_rf;
+ led-upgrade = &led_rf;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_rf: rf_green {
+ label = "green:rf";
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "sw4";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+};
+
+ð1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "ecoscentric,redboot-fis-partitions";
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_ohci_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb2 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_ehci_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7240.dtsi b/target/linux/ath79/dts/ar7240.dtsi
new file mode 100644
index 0000000..730c509
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar724x.dtsi"
+
+/ {
+ usb_phy: usb-phy {
+ compatible = "qca,ar7200-usb-phy";
+
+ reset-names = "usb-phy", "usb-ohci-dll";
+ resets = <&rst 4>, <&rst 3>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+};
+
+&ahb {
+ usb: usb@1b000000 {
+ compatible = "generic-ohci";
+ reg = <0x1b000000 0x1000>;
+
+ interrupts = <3>;
+
+ resets = <&rst 5>;
+ reset-names = "usb-host";
+
+ phy-names = "usb-phy";
+ phys = <&usb_phy>;
+
+ status = "disabled";
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ compatible = "qca,ar7240-mdio";
+ builtin-switch;
+
+ builtin_switch: switch0@1f {
+ compatible = "qca,ar7240sw";
+
+ reg = <0x1f>;
+ resets = <&rst 8>;
+ reset-names = "switch";
+ qca,mib-poll-interval = <500>;
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ swphy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "mii";
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ compatible = "qca,ar7240-eth", "syscon";
+
+ pll-data = <0x00110000 0x00001099 0x00991099>;
+
+ resets = <&rst 9>;
+ reset-names = "mac";
+ phy-handle = <&swphy4>;
+};
+
+ð1 {
+ compatible = "qca,ar7240-eth", "syscon";
+
+ pll-data = <0x00110000 0x00001099 0x00991099>;
+
+ resets = <&rst 13>;
+ reset-names = "mac";
+
+ phy-mode = "gmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7240_buffalo_whr-g301n.dts b/target/linux/ath79/dts/ar7240_buffalo_whr-g301n.dts
new file mode 100644
index 0000000..e5d7ea5
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_buffalo_whr-g301n.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "buffalo,whr-g301n", "qca,ar7240";
+ model = "Buffalo WHR-G301N";
+
+ aliases {
+ led-boot = &led_diag;
+ led-failsafe = &led_diag;
+ led-upgrade = &led_diag;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ router_on {
+ label = "router_on";
+ linux,code = <BTN_2>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ router_off {
+ label = "router_off";
+ linux,code = <BTN_3>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&switch_led_pins>;
+
+ security {
+ label = "orange:security";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led_diag: diag {
+ label = "red:diag";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ router {
+ label = "green:router";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "green:lan2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "green:lan3";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "green:lan4";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x3e000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@3e000 {
+ reg = <0x3e000 0x2000>;
+ label = "u-boot-env";
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "denx,uimage";
+ reg = <0x40000 0x3a0000>;
+ label = "firmware";
+ };
+
+ partition@3e0000 {
+ reg = <0x3e0000 0x10000>;
+ label = "user_property";
+ read-only;
+ };
+
+ art: partition@3f0000 {
+ reg = <0x3f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ mtd-mac-address = <&art 0x120c>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x120c>;
+ mtd-mac-address-increment = <1>;
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,002a";
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ mtd-mac-address = <&art 0x120c>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&pinmux {
+ switch_led_pins: switch_led_pins {
+ pinctrl-single,bits = <0x0 0x0 0xf8>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7240_dlink_dir-615-e4.dts b/target/linux/ath79/dts/ar7240_dlink_dir-615-e4.dts
new file mode 100644
index 0000000..abd2984
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_dlink_dir-615-e4.dts
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "D-Link DIR-615 E4";
+ compatible = "dlink,dir-615-e4", "qca,ar7240";
+
+ aliases {
+ led-boot = &led_power_amber;
+ led-failsafe = &led_power_amber;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_amber;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&switch_led_pins>;
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_power_amber: power_amber {
+ label = "amber:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "blue:wps";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "green:lan2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "green:lan3";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "green:lan4";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_green {
+ label = "green:wan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <33000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x30000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x30000 0x10000>;
+ label = "nvram";
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "denx,uimage";
+ reg = <0x40000 0x3b0000>;
+ label = "firmware";
+ };
+
+ partition@3f0000 {
+ reg = <0x3f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
+
+ð1 {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,002b";
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&pinmux {
+ switch_led_pins: pinmux_switch_led_pins {
+ pinctrl-single,bits = <0x0 0x0 0xf8>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7240_engenius_enh202-v1.dts b/target/linux/ath79/dts/ar7240_engenius_enh202-v1.dts
new file mode 100644
index 0000000..c5a667b
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_engenius_enh202-v1.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240.dtsi"
+#include "ar724x_senao_loader-64k.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "engenius,enh202-v1", "qca,ar7240";
+ model = "EnGenius ENH202 v1";
+
+ aliases {
+ led-boot = &led_rssihigh;
+ led-failsafe = &led_rssihigh;
+ led-running = &led_rssihigh;
+ led-upgrade = &led_rssihigh;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
+
+ rssilow {
+ label = "red:rssilow";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimedium {
+ label = "amber:rssimedium";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led_rssihigh: rssihigh {
+ label = "green:rssihigh";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "amber:lan";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+ð0 {
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,002a";
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7240_netgear_wnr1000-v2.dts b/target/linux/ath79/dts/ar7240_netgear_wnr1000-v2.dts
new file mode 100644
index 0000000..7e1c87a
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_netgear_wnr1000-v2.dts
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+ compatible = "netgear,wnr1000-v2", "qca,ar7240";
+ model = "Netgear WNR1000 v2";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_power_amber;
+ led-failsafe = &led_power_amber;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_amber;
+ label-mac-device = ð1;
+ };
+
+ ath9k-keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&ath9k 8 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_amber: power_amber {
+ label = "amber:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wan_green {
+ label = "green:wan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1_green {
+ label = "green:lan1";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1_amber {
+ label = "amber:lan1";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2_green {
+ label = "green:lan2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2_amber {
+ label = "amber:lan2";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3_green {
+ label = "green:lan3";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3_amber {
+ label = "amber:lan3";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4_green {
+ label = "green:lan4";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4_amber {
+ label = "amber:lan4";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wps_green {
+ label = "green:wps";
+ gpios = <&ath9k 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan_blue {
+ label = "blue:wlan";
+ gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3a0000>;
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <0x31303031>;
+ openwrt,ih-type = <IH_TYPE_FILESYSTEM>;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x6>;
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,002b";
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dts b/target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dts
new file mode 100644
index 0000000..6ae70ab
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240_netgear_wnr612-v2.dtsi"
+
+/ {
+ compatible = "netgear,wnr612-v2", "qca,ar7240";
+ model = "Netgear WNR612 v2";
+};
diff --git a/target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi b/target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi
new file mode 100644
index 0000000..7202e1d
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ label-mac-device = ð1;
+ };
+
+ ath9k-keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "green:lan2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x40000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@40000 {
+ reg = <0x40000 0x10000>;
+ label = "u-boot-env";
+ };
+
+ partition@50000 {
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <0x32303631>;
+ openwrt,ih-type = <IH_TYPE_FILESYSTEM>;
+ reg = <0x50000 0x3a0000>;
+ label = "firmware";
+ };
+
+ art: partition@3f0000 {
+ reg = <0x3f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x6>;
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,002b";
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7240_on_n150r.dts b/target/linux/ath79/dts/ar7240_on_n150r.dts
new file mode 100644
index 0000000..8136445
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_on_n150r.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240_netgear_wnr612-v2.dtsi"
+
+/ {
+ compatible = "on,n150r", "qca,ar7240";
+ model = "ON Network N150R";
+};
diff --git a/target/linux/ath79/dts/ar7240_tplink.dtsi b/target/linux/ath79/dts/ar7240_tplink.dtsi
new file mode 100644
index 0000000..4799fd7
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_tplink.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = &ath9k;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_switch_led_pins>;
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ qss {
+ label = "green:qss";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ reg = <0x20000 0x3d0000>;
+ label = "firmware";
+ };
+
+ art: partition@3f0000 {
+ reg = <0x3f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
+
+ð1 {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ mtd-mac-address = <&uboot 0x1fc00>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&pinmux {
+ pinmux_switch_led_pins: switch_led_pins {
+ pinctrl-single,bits = <0x0 0x0 0xf8>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7240_tplink_tl-wa.dtsi b/target/linux/ath79/dts/ar7240_tplink_tl-wa.dtsi
new file mode 100644
index 0000000..e0ac582
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_tplink_tl-wa.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240_tplink.dtsi"
+
+&leds {
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+};
+
+ð0 {
+ compatible = "syscon", "simple-mfd";
+};
+
+ð1 {
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+
+&ath9k {
+ compatible = "pci168c,002a";
+};
diff --git a/target/linux/ath79/dts/ar7240_tplink_tl-wa701nd-v1.dts b/target/linux/ath79/dts/ar7240_tplink_tl-wa701nd-v1.dts
new file mode 100644
index 0000000..eda5ae4
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_tplink_tl-wa701nd-v1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240_tplink_tl-wa.dtsi"
+
+/ {
+ model = "TP-Link TL-WA701ND v1";
+ compatible = "tplink,tl-wa701nd-v1", "qca,ar7240";
+};
diff --git a/target/linux/ath79/dts/ar7240_tplink_tl-wa730re-v1.dts b/target/linux/ath79/dts/ar7240_tplink_tl-wa730re-v1.dts
new file mode 100644
index 0000000..93e59dc
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_tplink_tl-wa730re-v1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240_tplink_tl-wa.dtsi"
+
+/ {
+ model = "TP-Link TL-WA730RE v1";
+ compatible = "tplink,tl-wa730re-v1", "qca,ar7240";
+};
diff --git a/target/linux/ath79/dts/ar7240_tplink_tl-wa801nd-v1.dts b/target/linux/ath79/dts/ar7240_tplink_tl-wa801nd-v1.dts
new file mode 100644
index 0000000..c86f8f0
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_tplink_tl-wa801nd-v1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240_tplink_tl-wa.dtsi"
+
+/ {
+ model = "TP-Link TL-WA801ND v1";
+ compatible = "tplink,tl-wa801nd-v1", "qca,ar7240";
+};
diff --git a/target/linux/ath79/dts/ar7240_tplink_tl-wa830re-v1.dts b/target/linux/ath79/dts/ar7240_tplink_tl-wa830re-v1.dts
new file mode 100644
index 0000000..e84dc6b
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_tplink_tl-wa830re-v1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240_tplink_tl-wa.dtsi"
+
+/ {
+ model = "TP-Link TL-WA830RE v1";
+ compatible = "tplink,tl-wa830re-v1", "qca,ar7240";
+};
diff --git a/target/linux/ath79/dts/ar7240_tplink_tl-wa901nd-v1.dts b/target/linux/ath79/dts/ar7240_tplink_tl-wa901nd-v1.dts
new file mode 100644
index 0000000..008da2e
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_tplink_tl-wa901nd-v1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240_tplink_tl-wa.dtsi"
+
+/ {
+ model = "TP-Link TL-WA901ND v1";
+ compatible = "tplink,tl-wa901nd-v1", "qca,ar7240";
+};
diff --git a/target/linux/ath79/dts/ar7240_tplink_tl-wr.dtsi b/target/linux/ath79/dts/ar7240_tplink_tl-wr.dtsi
new file mode 100644
index 0000000..bd6caac
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_tplink_tl-wr.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240_tplink.dtsi"
+
+&leds {
+ lan1 {
+ label = "green:lan1";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "green:lan2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "green:lan3";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "green:lan4";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+};
+
+ð0 {
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+ð1 {
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
+
+&ath9k {
+ compatible = "pci168c,002b";
+};
diff --git a/target/linux/ath79/dts/ar7240_tplink_tl-wr740n-v1.dts b/target/linux/ath79/dts/ar7240_tplink_tl-wr740n-v1.dts
new file mode 100644
index 0000000..8b38c5a
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_tplink_tl-wr740n-v1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240_tplink_tl-wr.dtsi"
+
+/ {
+ model = "TP-Link TL-WR740N v1/v2";
+ compatible = "tplink,tl-wr740n-v1", "qca,ar7240";
+};
diff --git a/target/linux/ath79/dts/ar7240_tplink_tl-wr740n-v3.dts b/target/linux/ath79/dts/ar7240_tplink_tl-wr740n-v3.dts
new file mode 100644
index 0000000..71f361c
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_tplink_tl-wr740n-v3.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240_tplink_tl-wr.dtsi"
+
+/ {
+ model = "TP-Link TL-WR740N v3";
+ compatible = "tplink,tl-wr740n-v3", "qca,ar7240";
+};
diff --git a/target/linux/ath79/dts/ar7240_tplink_tl-wr741-v1.dts b/target/linux/ath79/dts/ar7240_tplink_tl-wr741-v1.dts
new file mode 100644
index 0000000..d6fde1b
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_tplink_tl-wr741-v1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240_tplink_tl-wr.dtsi"
+
+/ {
+ model = "TP-Link TL-WR741N/ND v1/v2";
+ compatible = "tplink,tl-wr741-v1", "qca,ar7240";
+};
diff --git a/target/linux/ath79/dts/ar7240_tplink_tl-wr743nd-v1.dts b/target/linux/ath79/dts/ar7240_tplink_tl-wr743nd-v1.dts
new file mode 100644
index 0000000..756f64c
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_tplink_tl-wr743nd-v1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240_tplink_tl-wr.dtsi"
+
+/ {
+ model = "TP-Link TL-WR743ND v1";
+ compatible = "tplink,tl-wr743nd-v1", "qca,ar7240";
+};
diff --git a/target/linux/ath79/dts/ar7240_tplink_tl-wr841-v5.dts b/target/linux/ath79/dts/ar7240_tplink_tl-wr841-v5.dts
new file mode 100644
index 0000000..a90d6f7
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_tplink_tl-wr841-v5.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240_tplink_tl-wr.dtsi"
+
+/ {
+ model = "TP-Link TL-WR841N/ND v5/v6";
+ compatible = "tplink,tl-wr841-v5", "qca,ar7240";
+};
diff --git a/target/linux/ath79/dts/ar7240_tplink_tl-wr941-v4.dts b/target/linux/ath79/dts/ar7240_tplink_tl-wr941-v4.dts
new file mode 100644
index 0000000..d0b2ca0
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_tplink_tl-wr941-v4.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240_tplink_tl-wr.dtsi"
+
+/ {
+ model = "TP-Link TL-WR941N/ND v4";
+ compatible = "tplink,tl-wr941-v4", "qca,ar7240";
+};
diff --git a/target/linux/ath79/dts/ar7240_ubnt_bullet-m-ar7240.dts b/target/linux/ath79/dts/ar7240_ubnt_bullet-m-ar7240.dts
new file mode 100644
index 0000000..7dd2c7b
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_ubnt_bullet-m-ar7240.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7240.dtsi"
+#include "ar724x_ubnt_xm.dtsi"
+#include "ar724x_ubnt_xm_outdoor.dtsi"
+
+/ {
+ compatible = "ubnt,bullet-m-ar7240", "ubnt,xm", "qca,ar7240";
+ model = "Ubiquiti Bullet M (XM AR7240)";
+};
+
+ð0 {
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
diff --git a/target/linux/ath79/dts/ar7241.dtsi b/target/linux/ath79/dts/ar7241.dtsi
new file mode 100644
index 0000000..4044cde
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar724x.dtsi"
+
+/ {
+ usb_phy: usb-phy {
+ compatible = "qca,ar7200-usb-phy";
+
+ reset-names = "usb-phy", "usb-suspend-override";
+ resets = <&rst 4>, <&rst 3>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+};
+
+&gpio {
+ ngpios = <20>;
+};
+
+&ahb {
+ usb: usb@1b000000 {
+ compatible = "generic-ehci";
+ reg = <0x1b000000 0x1000>;
+
+ interrupts = <3>;
+
+ resets = <&rst 5>;
+ reset-names = "usb-host";
+
+ has-transaction-translator;
+ caps-offset = <0x100>;
+
+ phy-names = "usb-phy";
+ phys = <&usb_phy>;
+
+ status = "disabled";
+ };
+};
+
+ð0 {
+ compatible = "qca,ar7241-eth", "syscon";
+
+ pll-data = <0x00110000 0x00001099 0x00991099>;
+
+ resets = <&rst 9>;
+ reset-names = "mac";
+ phy-handle = <&swphy4>;
+};
+
+&mdio1 {
+ status = "okay";
+
+ resets = <&rst 23>;
+ reset-names = "mdio";
+ builtin-switch;
+
+ builtin_switch: switch0@1f {
+ compatible = "qca,ar7240sw";
+
+ reg = <0x1f>;
+ resets = <&rst 8>;
+ reset-names = "switch";
+ qca,mib-poll-interval = <500>;
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ swphy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "mii";
+ };
+ };
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ compatible = "qca,ar7241-eth", "syscon";
+
+ pll-data = <0x00110000 0x00001099 0x00991099>;
+
+ resets = <&rst 13>;
+ reset-names = "mac";
+
+ phy-mode = "gmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7241_netgear_wnr2000-v3.dts b/target/linux/ath79/dts/ar7241_netgear_wnr2000-v3.dts
new file mode 100644
index 0000000..de2b536
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_netgear_wnr2000-v3.dts
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+ compatible = "netgear,wnr2000-v3", "qca,ar7241";
+ model = "Netgear WNR2000 v3";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_power_amber;
+ led-failsafe = &led_power_amber;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_amber;
+ label-mac-device = ð1;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&ath9k 8 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&ath9k 9 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
+
+ wan_green {
+ label = "green:wan";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1_green {
+ label = "green:lan1";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1_amber {
+ label = "amber:lan1";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2_green {
+ label = "green:lan2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2_amber {
+ label = "amber:lan2";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3_green {
+ label = "green:lan3";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3_amber {
+ label = "amber:lan3";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4_green {
+ label = "green:lan4";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4_amber {
+ label = "amber:lan4";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wps_green {
+ label = "green:wps";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&ath9k 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_amber: power_amber {
+ label = "amber:power";
+ gpios = <&ath9k 2 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wlan_blue {
+ label = "blue:wlan";
+ gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3a0000>;
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <0x32303033>;
+ openwrt,ih-type = <IH_TYPE_FILESYSTEM>;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ compatible = "qca,ar7241-eth", "syscon", "simple-mfd";
+
+ mtd-mac-address = <&art 0x6>;
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,002e";
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7241_netgear_wnr2200-16m.dts b/target/linux/ath79/dts/ar7241_netgear_wnr2200-16m.dts
new file mode 100644
index 0000000..3842238
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_netgear_wnr2200-16m.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241_netgear_wnr2200.dtsi"
+
+/ {
+ compatible = "netgear,wnr2200-16m", "qca,ar7241";
+ model = "Netgear WNR2200 (16M)";
+};
+
+&partitions {
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfa0000>;
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <0x32323030>;
+ openwrt,ih-type = <IH_TYPE_FILESYSTEM>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7241_netgear_wnr2200-8m.dts b/target/linux/ath79/dts/ar7241_netgear_wnr2200-8m.dts
new file mode 100644
index 0000000..4eb15e2
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_netgear_wnr2200-8m.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241_netgear_wnr2200.dtsi"
+
+/ {
+ compatible = "netgear,wnr2200-8m", "qca,ar7241";
+ model = "Netgear WNR2200 (8M)";
+};
+
+&partitions {
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7a0000>;
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <0x32323030>;
+ openwrt,ih-type = <IH_TYPE_FILESYSTEM>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7241_netgear_wnr2200.dtsi b/target/linux/ath79/dts/ar7241_netgear_wnr2200.dtsi
new file mode 100644
index 0000000..e704ddd
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_netgear_wnr2200.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_power_amber;
+ led-failsafe = &led_power_amber;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_amber;
+ label-mac-device = ð1;
+ };
+
+ ath9k-keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&ath9k 5 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&ath9k 3 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
+
+ wan_green {
+ label = "green:wan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1_green {
+ label = "green:lan1";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1_amber {
+ label = "amber:lan1";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2_green {
+ label = "green:lan2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2_amber {
+ label = "amber:lan2";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3_green {
+ label = "green:lan3";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3_amber {
+ label = "amber:lan3";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4_green {
+ label = "green:lan4";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4_amber {
+ label = "amber:lan4";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wps_green {
+ label = "green:wps";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ usb_green {
+ label = "green:usb";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&ath9k 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_amber: power_amber {
+ label = "amber:power";
+ gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wlan_blue {
+ label = "blue:wlan";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ compatible = "qca,ar7241-eth", "syscon", "simple-mfd";
+
+ mtd-mac-address = <&art 0x6>;
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,002e";
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ usb_power {
+ gpio-hog;
+ line-name = "netgear:power:usb";
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7241_tplink.dtsi b/target/linux/ath79/dts/ar7241_tplink.dtsi
new file mode 100644
index 0000000..6d7f751
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_tplink.dtsi
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = &ath9k;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ qss {
+ label = "qss";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ qss {
+ label = "green:qss";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ reg = <0x20000 0x3d0000>;
+ label = "firmware";
+ };
+
+ partition@3f0000 {
+ reg = <0x3f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ qca,no-eeprom;
+ mtd-mac-address = <&uboot 0x1fc00>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+ð1 {
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
diff --git a/target/linux/ath79/dts/ar7241_tplink_tl-mr3220-v1.dts b/target/linux/ath79/dts/ar7241_tplink_tl-mr3220-v1.dts
new file mode 100644
index 0000000..af8e297
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_tplink_tl-mr3220-v1.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241_tplink_tl-mr3x20.dtsi"
+
+/ {
+ compatible = "tplink,tl-mr3220-v1", "qca,ar7241";
+ model = "TP-Link TL-MR3220 v1";
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar7241_tplink_tl-mr3420-v1.dts b/target/linux/ath79/dts/ar7241_tplink_tl-mr3420-v1.dts
new file mode 100644
index 0000000..cae2f54
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_tplink_tl-mr3420-v1.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241_tplink_tl-mr3x20.dtsi"
+
+/ {
+ compatible = "tplink,tl-mr3420-v1", "qca,ar7241";
+ model = "TP-Link TL-MR3420 v1";
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar7241_tplink_tl-mr3x20.dtsi b/target/linux/ath79/dts/ar7241_tplink_tl-mr3x20.dtsi
new file mode 100644
index 0000000..218ea5e
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_tplink_tl-mr3x20.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241_tplink.dtsi"
+
+/ {
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio_usb_power {
+ gpio-export,name = "tp-link:power:usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&leds {
+ led3g {
+ label = "green:3g";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/ar7241_tplink_tl-wr841-v7.dts b/target/linux/ath79/dts/ar7241_tplink_tl-wr841-v7.dts
new file mode 100644
index 0000000..17e06df
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_tplink_tl-wr841-v7.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241_tplink.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr841-v7", "qca,ar7241";
+ model = "TP-Link TL-WR841N/ND v7";
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar7241_tplink_tl-wr842n-v1.dts b/target/linux/ath79/dts/ar7241_tplink_tl-wr842n-v1.dts
new file mode 100644
index 0000000..ca1ad27
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_tplink_tl-wr842n-v1.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wr842n-v1", "qca,ar7241";
+ model = "TP-Link TL-WR842N/ND v1";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = &ath9k;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ rfkill {
+ label = "rfkill";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ qss {
+ label = "green:qss";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led3g {
+ label = "green:3g";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_usb_power {
+ gpio-export,name = "tp-link:power:usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ reg = <0x20000 0x7d0000>;
+ label = "firmware";
+ };
+
+ partition@7f0000 {
+ reg = <0x7f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,002e";
+ reg = <0x0000 0 0 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ qca,no-eeprom;
+ mtd-mac-address = <&uboot 0x1fc00>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+ð1 {
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
diff --git a/target/linux/ath79/dts/ar7241_ubnt_airrouter.dts b/target/linux/ath79/dts/ar7241_ubnt_airrouter.dts
new file mode 100644
index 0000000..fcc66c0
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_ubnt_airrouter.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241.dtsi"
+#include "ar724x_ubnt_xm.dtsi"
+
+/ {
+ compatible = "ubnt,airrouter", "ubnt,xm", "qca,ar7241";
+ model = "Ubiquiti AirRouter (XM)";
+
+ aliases {
+ led-boot = &led_globe;
+ led-failsafe = &led_globe;
+ led-running = &led_globe;
+ led-upgrade = &led_globe;
+ label-mac-device = &wifi;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_globe: globe {
+ label = "green:globe";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ power {
+ label = "green:power";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/ar7241_ubnt_bullet-m-ar7241.dts b/target/linux/ath79/dts/ar7241_ubnt_bullet-m-ar7241.dts
new file mode 100644
index 0000000..00a11b4
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_ubnt_bullet-m-ar7241.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241.dtsi"
+#include "ar724x_ubnt_xm.dtsi"
+#include "ar724x_ubnt_xm_outdoor.dtsi"
+
+/ {
+ compatible = "ubnt,bullet-m-ar7241", "ubnt,xm", "qca,ar7241";
+ model = "Ubiquiti Bullet M (XM AR7241)";
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
diff --git a/target/linux/ath79/dts/ar7241_ubnt_nanobridge-m.dts b/target/linux/ath79/dts/ar7241_ubnt_nanobridge-m.dts
new file mode 100644
index 0000000..77ed9b1
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_ubnt_nanobridge-m.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241.dtsi"
+#include "ar724x_ubnt_xm.dtsi"
+#include "ar724x_ubnt_xm_outdoor.dtsi"
+
+/ {
+ compatible = "ubnt,nanobridge-m", "ubnt,xm", "qca,ar7241";
+ model = "Ubiquiti NanoBridge M (XM)";
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
diff --git a/target/linux/ath79/dts/ar7241_ubnt_nanostation-loco-m.dts b/target/linux/ath79/dts/ar7241_ubnt_nanostation-loco-m.dts
new file mode 100644
index 0000000..55476a2
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_ubnt_nanostation-loco-m.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241.dtsi"
+#include "ar724x_ubnt_xm.dtsi"
+#include "ar724x_ubnt_xm_outdoor.dtsi"
+
+/ {
+ compatible = "ubnt,nanostation-loco-m", "ubnt,xm", "qca,ar7241";
+ model = "Ubiquiti Nanostation Loco M (XM)";
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
diff --git a/target/linux/ath79/dts/ar7241_ubnt_nanostation-m.dts b/target/linux/ath79/dts/ar7241_ubnt_nanostation-m.dts
new file mode 100644
index 0000000..71c6860
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_ubnt_nanostation-m.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241.dtsi"
+#include "ar724x_ubnt_xm.dtsi"
+#include "ar724x_ubnt_xm_outdoor.dtsi"
+
+/ {
+ compatible = "ubnt,nanostation-m", "ubnt,xm", "qca,ar7241";
+ model = "Ubiquiti Nanostation M (XM)";
+};
diff --git a/target/linux/ath79/dts/ar7241_ubnt_picostation-m.dts b/target/linux/ath79/dts/ar7241_ubnt_picostation-m.dts
new file mode 100644
index 0000000..f564783
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_ubnt_picostation-m.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241.dtsi"
+#include "ar724x_ubnt_xm.dtsi"
+#include "ar724x_ubnt_xm_outdoor.dtsi"
+
+/ {
+ compatible = "ubnt,picostation-m", "ubnt,xm", "qca,ar7241";
+ model = "Ubiquiti Picostation M (XM)";
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
diff --git a/target/linux/ath79/dts/ar7241_ubnt_powerbridge-m.dts b/target/linux/ath79/dts/ar7241_ubnt_powerbridge-m.dts
new file mode 100644
index 0000000..e2df1ff
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_ubnt_powerbridge-m.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241.dtsi"
+#include "ar724x_ubnt_xm.dtsi"
+#include "ar724x_ubnt_xm_outdoor.dtsi"
+
+/ {
+ compatible = "ubnt,powerbridge-m", "ubnt,xm", "qca,ar7241";
+ model = "Ubiquiti PowerBridge M (XM)";
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
diff --git a/target/linux/ath79/dts/ar7241_ubnt_rocket-m.dts b/target/linux/ath79/dts/ar7241_ubnt_rocket-m.dts
new file mode 100644
index 0000000..e0342ec
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_ubnt_rocket-m.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241.dtsi"
+#include "ar724x_ubnt_xm.dtsi"
+#include "ar724x_ubnt_xm_outdoor.dtsi"
+
+/ {
+ compatible = "ubnt,rocket-m", "ubnt,xm", "qca,ar7241";
+ model = "Ubiquiti Rocket M (XM)";
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/ar7241_ubnt_unifi-ap-outdoor-plus.dts b/target/linux/ath79/dts/ar7241_ubnt_unifi-ap-outdoor-plus.dts
new file mode 100644
index 0000000..68f83f7
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_ubnt_unifi-ap-outdoor-plus.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241_ubnt_unifi.dtsi"
+
+/ {
+ compatible = "ubnt,unifi-ap-outdoor-plus", "qca,ar7241";
+ model = "Ubiquiti UniFi AP Outdoor+";
+
+ aliases {
+ led-boot = &led_white;
+ led-failsafe = &led_white;
+ led-running = &led_blue;
+ led-upgrade = &led_blue;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_blue: blue {
+ label = "blue";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_white: white {
+ label = "white";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xf60000>;
+
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x300000>;
+ /* Can be resized w/o issues.
+ * U-Boot can load kernel from the
+ * entirety of the "firmware" partition space.
+ */
+ };
+
+ partition@300000 {
+ label = "rootfs";
+ reg = <0x300000 0xc60000>;
+ };
+ };
+
+ partition@fb0000 {
+ label = "cfg";
+ reg = <0xfb0000 0x40000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x6>;
+};
+
+&wifi {
+ ubnt,hsr;
+};
diff --git a/target/linux/ath79/dts/ar7241_ubnt_unifi.dts b/target/linux/ath79/dts/ar7241_ubnt_unifi.dts
new file mode 100644
index 0000000..287e8cc
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_ubnt_unifi.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241_ubnt_unifi.dtsi"
+
+/ {
+ compatible = "ubnt,unifi", "qca,ar7241";
+ model = "Ubiquiti UniFi";
+
+ aliases {
+ led-boot = &led_dome_green;
+ led-failsafe = &led_dome_green;
+ led-running = &led_dome_green;
+ led-upgrade = &led_dome_green;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_dome_green: dome_green {
+ label = "green:dome";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ dome_orange {
+ label = "orange:dome";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0x750000>;
+ };
+
+ partition@7a0000 {
+ label = "board_config";
+ reg = <0x7a0000 0x010000>;
+ read-only;
+ };
+
+ partition@7b0000 {
+ label = "cfg";
+ reg = <0x7b0000 0x040000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
diff --git a/target/linux/ath79/dts/ar7241_ubnt_unifi.dtsi b/target/linux/ath79/dts/ar7241_ubnt_unifi.dtsi
new file mode 100644
index 0000000..ab0372e
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_ubnt_unifi.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7241.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = ð0;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&pcie {
+ status = "okay";
+
+ wifi: wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+};
+
diff --git a/target/linux/ath79/dts/ar7242.dtsi b/target/linux/ath79/dts/ar7242.dtsi
new file mode 100644
index 0000000..be28ae7
--- /dev/null
+++ b/target/linux/ath79/dts/ar7242.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar724x.dtsi"
+
+/ {
+ usb_phy: usb-phy {
+ compatible = "qca,ar7200-usb-phy";
+
+ reset-names = "usb-phy", "usb-suspend-override";
+ resets = <&rst 4>, <&rst 3>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+};
+
+&gpio {
+ ngpios = <20>;
+};
+
+&ahb {
+ usb: usb@1b000000 {
+ compatible = "generic-ehci";
+ reg = <0x1b000000 0x1000>;
+
+ interrupts = <3>;
+
+ resets = <&rst 5>;
+ reset-names = "usb-host";
+
+ has-transaction-translator;
+ caps-offset = <0x100>;
+
+ phy-names = "usb-phy";
+ phys = <&usb_phy>;
+
+ status = "disabled";
+ };
+};
+
+&mdio0 {
+ resets = <&rst 22>;
+ reset-names = "mdio";
+};
+
+ð0 {
+ compatible = "qca,ar7242-eth", "syscon";
+
+ pll-data = <0x16000000 0x00000101 0x00001616>;
+ pll-reg = <0x4 0x2c 17>;
+ pll-handle = <&pll>;
+
+ resets = <&rst 9>;
+ reset-names = "mac";
+};
+
+&mdio1 {
+ resets = <&rst 23>;
+ reset-names = "mdio";
+ builtin-switch;
+
+ builtin_switch: switch0@1f {
+ compatible = "qca,ar7240sw";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1f>;
+ resets = <&rst 8>;
+ reset-names = "switch";
+ qca,mib-poll-interval = <500>;
+ };
+};
+
+ð1 {
+ compatible = "qca,ar7242-eth", "syscon";
+
+ resets = <&rst 13>;
+ reset-names = "mac";
+
+ phy-mode = "gmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7242_avm_fritz300e.dts b/target/linux/ath79/dts/ar7242_avm_fritz300e.dts
new file mode 100644
index 0000000..310a2b1
--- /dev/null
+++ b/target/linux/ath79/dts/ar7242_avm_fritz300e.dts
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7242.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "avm,fritz300e", "qca,ar7242";
+ model = "AVM FRITZ!WLAN Repeater 300E";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ label-mac-device = &ath9k;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ rssi0 {
+ label = "green:rssi0";
+ gpios = <&ath9k 10 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi1 {
+ label = "green:rssi1";
+ gpios = <&ath9k 4 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi2 {
+ label = "green:rssi2";
+ gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi3 {
+ label = "green:rssi3";
+ gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi4 {
+ label = "green:rssi4";
+ gpios = <&ath9k 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ eth-phy-reset {
+ compatible = "regulator-fixed";
+
+ regulator-name = "eth-phy-reset";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio 11 GPIO_ACTIVE_LOW>;
+ startup-delay-us = <300000>;
+ enable-active-high;
+
+ regulator-always-on;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x20000>;
+ label = "urloader";
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "avm,eva-firmware";
+ reg = <0x20000 0xee0000>;
+ label = "firmware";
+ };
+
+ partition@f00000 {
+ reg = <0xf00000 0x80000>;
+ label = "tffs (1)";
+ read-only;
+ };
+
+ partition@f80000 {
+ reg = <0xf80000 0x80000>;
+ label = "tffs (2)";
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ qca,no-eeprom;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ pll-data = <0x16000000 0x00000101 0x00001313>;
+};
diff --git a/target/linux/ath79/dts/ar7242_buffalo_bhr-4grv.dts b/target/linux/ath79/dts/ar7242_buffalo_bhr-4grv.dts
new file mode 100644
index 0000000..3b2dc0e
--- /dev/null
+++ b/target/linux/ath79/dts/ar7242_buffalo_bhr-4grv.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7242_buffalo_wzr-bhr.dtsi"
+
+/ {
+ compatible = "buffalo,bhr-4grv", "qca,ar7242";
+ model = "Buffalo BHR-4GRV";
+};
+
+&leds {
+ sec_vpn {
+ label = "orange:vpn";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+};
+
+ð0 {
+ mtd-mac-address = <&art 0x0>;
+};
diff --git a/target/linux/ath79/dts/ar7242_buffalo_wzr-bhr.dtsi b/target/linux/ath79/dts/ar7242_buffalo_wzr-bhr.dtsi
new file mode 100644
index 0000000..98f6759
--- /dev/null
+++ b/target/linux/ath79/dts/ar7242_buffalo_wzr-bhr.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7242.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_diag;
+ led-failsafe = &led_diag;
+ led-upgrade = &led_diag;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
+ keys: keys {
+ compatible = "gpio-keys";
+
+ usb {
+ label = "usb";
+ linux,code = <BTN_2>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ led_diag: diag {
+ label = "red:diag";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "green:usb";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio_usb_power {
+ gpio-export,name = "buffalo:usb-power";
+ gpio-export,output = <1>;
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ virtual_flash {
+ compatible = "mtd-concat";
+ devices = <&flash0 &flash1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x40000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@40000 {
+ reg = <0x40000 0x10000>;
+ label = "u-boot-env";
+ };
+
+ art: partition@50000 {
+ reg = <0x50000 0x10000>;
+ label = "art";
+ read-only;
+ };
+
+ partition@60000 {
+ compatible = "denx,uimage";
+ reg = <0x60000 0x1f80000>;
+ label = "firmware";
+ };
+
+ partition@1fe0000 {
+ reg = <0x1fe0000 0x20000>;
+ label = "user_property";
+ read-only;
+ };
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ cs-gpios = <0>, <0>;
+
+ flash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ };
+
+ flash1: flash@1 {
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x1>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g302h-a1a0.dts b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g302h-a1a0.dts
new file mode 100644
index 0000000..7cb051a
--- /dev/null
+++ b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g302h-a1a0.dts
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7242.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "buffalo,wzr-hp-g302h-a1a0", "qca,ar7242";
+ model = "Buffalo WZR-HP-G302H A1A0";
+
+ aliases {
+ led-boot = &led_diag;
+ led-failsafe = &led_diag;
+ led-upgrade = &led_diag;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ usb {
+ label = "usb";
+ linux,code = <BTN_2>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ router_on {
+ label = "router_on";
+ linux,code = <BTN_5>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ movie_engine {
+ label = "movie_engine";
+ linux,code = <BTN_3>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_diag: diag {
+ label = "red:diag";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "blue:usb";
+ gpios = <&ath9k 4 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+
+ wireless {
+ label = "green:wireless";
+ gpios = <&ath9k 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ security {
+ label = "orange:security";
+ gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
+ };
+
+ router {
+ label = "green:router";
+ gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
+ };
+
+ movie_engine_on {
+ label = "blue:movie_engine_on";
+ gpios = <&ath9k 8 GPIO_ACTIVE_LOW>;
+ };
+
+ movie_engine_off {
+ label = "blue:movie_engine_off";
+ gpios = <&ath9k 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio_usb_power {
+ gpio-export,name = "buffalo:usb-power";
+ gpio-export,output = <1>;
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ virtual_flash {
+ compatible = "mtd-concat";
+ devices = <&flash0 &flash1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x40000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@40000 {
+ reg = <0x40000 0x10000>;
+ label = "u-boot-env";
+ };
+
+ art: partition@50000 {
+ reg = <0x50000 0x10000>;
+ label = "art";
+ read-only;
+ };
+
+ partition@60000 {
+ compatible = "denx,uimage";
+ reg = <0x60000 0x1f60000>;
+ label = "firmware";
+ };
+
+ partition@1fc0000 {
+ reg = <0x1fc0000 0x40000>;
+ label = "user_property";
+ read-only;
+ };
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ cs-gpios = <0>, <0>;
+
+ flash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ };
+
+ flash1: flash@1 {
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x1>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x1c000000 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&art 0x120c>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,002a";
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&art 0x120c>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
new file mode 100644
index 0000000..4f186c2
--- /dev/null
+++ b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7242_buffalo_wzr-bhr.dtsi"
+
+/ {
+ compatible = "buffalo,wzr-hp-g450h", "qca,ar7242";
+ model = "Buffalo WZR-HP-G450H/WZR-450HP";
+
+ aliases {
+ label-mac-device = ð0;
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ led_movie_engine {
+ label = "blue:movie_engine";
+ gpios = <&ath9k 13 GPIO_ACTIVE_LOW>;
+ };
+
+ router {
+ label = "green:router";
+ gpios = <&ath9k 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless {
+ label = "green:wireless";
+ gpios = <&ath9k 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&keys {
+ movie_engine {
+ label = "movie_engine";
+ linux,code = <BTN_6>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ aoss {
+ label = "aoss";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ router_off {
+ label = "router_off";
+ linux,code = <BTN_5>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+};
+
+&leds {
+ sec_vpn {
+ label = "orange:security";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+};
+
+ð0 {
+ mtd-mac-address = <&art 0x1002>;
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,0030";
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&art 0x1002>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7242_engenius_eap350-v1.dts b/target/linux/ath79/dts/ar7242_engenius_eap350-v1.dts
new file mode 100644
index 0000000..436d8c1
--- /dev/null
+++ b/target/linux/ath79/dts/ar7242_engenius_eap350-v1.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7242.dtsi"
+#include "ar724x_senao_loader-4k.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "engenius,eap350-v1", "qca,ar7242";
+ model = "EnGenius EAP350 v1";
+
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "blue:power";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "blue:wlan";
+ gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ eee-broken-100tx;
+ eee-broken-1000t;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii-id";
+
+ pll-data = <0x02000000 0x00000101 0x00001313>;
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0,0 {
+ compatible = "pci168c,002a";
+ reg = <0x0 0 0 0 0>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7242_engenius_ecb350-v1.dts b/target/linux/ath79/dts/ar7242_engenius_ecb350-v1.dts
new file mode 100644
index 0000000..be9a193
--- /dev/null
+++ b/target/linux/ath79/dts/ar7242_engenius_ecb350-v1.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7242.dtsi"
+#include "ar724x_senao_loader-4k.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "engenius,ecb350-v1", "qca,ar7242";
+ model = "EnGenius ECB350 v1";
+
+ aliases {
+ label-mac-device = &ath9k;
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ eee-broken-100tx;
+ eee-broken-1000t;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii-id";
+
+ pll-data = <0x02000000 0x00000101 0x00001313>;
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0,0 {
+ compatible = "pci168c,002a";
+ reg = <0x0 0 0 0 0>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <(-1)>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7242_meraki_mr12.dts b/target/linux/ath79/dts/ar7242_meraki_mr12.dts
new file mode 100644
index 0000000..ea64b94
--- /dev/null
+++ b/target/linux/ath79/dts/ar7242_meraki_mr12.dts
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7242.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "meraki,mr12", "qca,ar7242";
+ model = "Meraki MR12";
+
+ aliases {
+ led-boot = &led_power_orange;
+ led-failsafe = &led_power_orange;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_orange;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ link1 {
+ label = "green:link1";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ link2 {
+ label = "green:link2";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ link3 {
+ label = "green:link3";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ link4 {
+ label = "green:link4";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_orange: power_orange {
+ label = "orange:power";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ panic-indicator;
+ };
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ wifi@0,0,0 {
+ compatible = "pci168c,002a";
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ mtd-mac-address = <&config 0x66>;
+ mtd-mac-address-increment = <1>;
+ };
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&config 0x66>;
+
+ pll-data = <0x02000000 0x00000101 0x00001313>;
+
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy4>;
+};
+
+&mdio1 {
+ status = "okay";
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&config 0x66>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x40000>;
+ read-only;
+ };
+
+ config: partition@80000 {
+ label = "config";
+ reg = <0x80000 0x20000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "firmware";
+ reg = <0xa0000 0xf40000>;
+ compatible = "denx,uimage";
+ };
+
+ partition@fe0000 {
+ label = "art";
+ reg = <0xfe0000 0x20000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar7242_tplink_tl-wr2543-v1.dts b/target/linux/ath79/dts/ar7242_tplink_tl-wr2543-v1.dts
new file mode 100644
index 0000000..01f4cb7
--- /dev/null
+++ b/target/linux/ath79/dts/ar7242_tplink_tl-wr2543-v1.dts
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7242.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wr2543-v1", "qca,ar7242";
+ model = "TP-Link TL-WR2543N/ND";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-running = &led_wps;
+ led-upgrade = &led_wps;
+ label-mac-device = ð0;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_wps: wps {
+ label = "green:wps";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "green:usb";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ rtl8367 {
+ compatible = "realtek,rtl8367";
+ gpio-sda = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio 6 GPIO_ACTIVE_HIGH>;
+ realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+ };
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x7d0000>;
+ };
+
+ partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ qca,no-eeprom;
+ mtd-mac-address = <&uboot 0x1fc00>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ phy-handle = <&phy0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-5xp.dts b/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-5xp.dts
new file mode 100644
index 0000000..85e85d8
--- /dev/null
+++ b/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-5xp.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7242_ubnt_sw.dtsi"
+
+/ {
+ compatible = "ubnt,edgeswitch-5xp", "qca,ar7242";
+ model = "Ubiquiti EdgeSwitch 5XP";
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ poe_24v_port1 {
+ gpio-export,name = "ubnt:24v-poe:port1";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_24v_port2 {
+ gpio-export,name = "ubnt:24v-poe:port2";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_24v_port3 {
+ gpio-export,name = "ubnt:24v-poe:port3";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_24v_port4 {
+ gpio-export,name = "ubnt:24v-poe:port4";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_24v_port5 {
+ gpio-export,name = "ubnt:24v-poe:port5";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-switch@0 {
+ compatible = "qca,ar8327";
+ reg = <0x0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x05100000 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x05100000 /* PORT6 PAD MODE CTRL */
+ 0x50 0x40004000 /* LED_CTRL0 */
+ 0x54 0x40004000 /* LED_CTRL1 */
+ 0x58 0x40004000 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii";
+
+ mtd-mac-address = <&art 0x0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-8xp.dts b/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-8xp.dts
new file mode 100644
index 0000000..b640bad
--- /dev/null
+++ b/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-8xp.dts
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7242_ubnt_sw.dtsi"
+
+/ {
+ compatible = "ubnt,edgeswitch-8xp", "qca,ar7242";
+ model = "Ubiquiti EdgeSwitch 8XP";
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ poe_24v_port1 {
+ gpio-export,name = "ubnt:24v-poe:port1";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_48v_port1 {
+ gpio-export,name = "ubnt:48v-poe:port1";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_24v_port2 {
+ gpio-export,name = "ubnt:24v-poe:port2";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_48v_port2 {
+ gpio-export,name = "ubnt:48v-poe:port2";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_24v_port3 {
+ gpio-export,name = "ubnt:24v-poe:port3";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_48v_port3 {
+ gpio-export,name = "ubnt:48v-poe:port3";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_24v_port4 {
+ gpio-export,name = "ubnt:24v-poe:port4";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_48v_port4 {
+ gpio-export,name = "ubnt:48v-poe:port4";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_24v_port5 {
+ gpio-export,name = "ubnt:24v-poe:port5";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_48v_port5 {
+ gpio-export,name = "ubnt:48v-poe:port5";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_24v_port6 {
+ gpio-export,name = "ubnt:24v-poe:port6";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_48v_port6 {
+ gpio-export,name = "ubnt:48v-poe:port6";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_24v_port7 {
+ gpio-export,name = "ubnt:24v-poe:port7";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_48v_port7 {
+ gpio-export,name = "ubnt:48v-poe:port7";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_24v_port8 {
+ gpio-export,name = "ubnt:24v-poe:port8";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_48v_port8 {
+ gpio-export,name = "ubnt:48v-poe:port8";
+ gpio-export,output = <0>;
+ gpios = <&gpio_hc595 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x10>;
+
+ ethernet-switch@1e {
+ compatible = "brcm,bcm53128";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1e>;
+
+ ports {
+ port0@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port1@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port2@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port3@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port4@4 {
+ reg = <4>;
+ label = "lan5";
+ };
+
+ port5@5 {
+ reg = <5>;
+ label = "lan6";
+ };
+
+ port6@6 {
+ reg = <6>;
+ label = "lan7";
+ };
+
+ port7@7 {
+ reg = <7>;
+ label = "lan8";
+ };
+
+ phy0: port8@8 {
+ reg = <8>;
+ label = "cpu";
+ ethernet = <ð0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-mode = "rgmii-rxid";
+ pll-data = <0x16000000 0x00000101 0x00001313>;
+ mtd-mac-address = <&art 0x0>;
+
+ phy-handle = <&phy0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7242_ubnt_sw.dtsi b/target/linux/ath79/dts/ar7242_ubnt_sw.dtsi
new file mode 100644
index 0000000..caae72c
--- /dev/null
+++ b/target/linux/ath79/dts/ar7242_ubnt_sw.dtsi
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7242.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "qca,ar7242";
+ model = "Ubiquiti Networks SW board";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_usr;
+ led-failsafe = &led_usr;
+ led-running = &led_usr;
+ led-upgrade = &led_usr;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_usr: usr {
+ label = "yellow:usr";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio_spi {
+ compatible = "spi-gpio";
+ #address-cells = <0x1>;
+ ranges;
+
+ sck-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+
+ gpio_hc595: gpio_spi@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ registers-number = <2>;
+ spi-max-frequency = <100000>;
+ enable-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x000000 0x040000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@40000 {
+ reg = <0x040000 0x010000>;
+ label = "u-boot-env";
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ reg = <0x050000 0x760000>;
+ label = "firmware";
+ };
+
+ partition@7b0000 {
+ reg = <0x7b0000 0x040000>;
+ label = "cfg";
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ reg = <0x7f0000 0x010000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x6>;
+};
diff --git a/target/linux/ath79/dts/ar724x.dtsi b/target/linux/ath79/dts/ar724x.dtsi
new file mode 100644
index 0000000..7e3f90e
--- /dev/null
+++ b/target/linux/ath79/dts/ar724x.dtsi
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ath79.dtsi"
+
+/ {
+ compatible = "qca,ar7240";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips24Kc";
+ clocks = <&pll ATH79_CLK_CPU>;
+ reg = <0>;
+ };
+ };
+
+ ahb: ahb {
+ apb {
+ ddr_ctrl: memory-controller@18000000 {
+ compatible = "qca,ar9132-ddr-controller",
+ "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x100>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ uart: uart@18020000 {
+ compatible = "ns16550a";
+ reg = <0x18020000 0x20>;
+ interrupts = <3>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "uart";
+
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ no-loopback-test;
+ };
+
+ gpio: gpio@18040000 {
+ compatible = "qca,ar7240-gpio",
+ "qca,ar7100-gpio";
+ reg = <0x18040000 0x30>;
+ interrupts = <2>;
+
+ ngpios = <18>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pinmux: pinmux@18040028 {
+ compatible = "pinctrl-single";
+
+ reg = <0x18040028 0x8>;
+
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x1>;
+ #pinctrl-cells = <2>;
+
+ jtag_disable_pins: pinmux_jtag_disable_pins {
+ pinctrl-single,bits = <0x0 0x1 0x1>;
+ };
+
+ switch_led_disable_pins: pinmux_switch_led_disable_pins {
+ pinctrl-single,bits = <0x0 0x0 0xf8>;
+ };
+
+ clks_disable_pins: pinmux_clks_disable_pins {
+ pinctrl-single,bits = <0x0 0x0 0x81f00>;
+ };
+ };
+
+ pll: pll-controller@18050000 {
+ compatible = "qca,ar7240-pll", "syscon";
+ reg = <0x18050000 0x3c>;
+
+ clock-names = "ref";
+ /* The board must provides the ref clock */
+
+ #clock-cells = <1>;
+ clock-output-names = "cpu", "ddr", "ahb";
+ };
+
+ wdt: wdt@18060008 {
+ compatible = "qca,ar7130-wdt";
+ reg = <0x18060008 0x8>;
+
+ interrupts = <4>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "wdt";
+ };
+
+ rst: reset-controller@1806001c {
+ compatible = "qca,ar7240-reset",
+ "qca,ar7100-reset";
+ reg = <0x1806001c 0x4>;
+
+ #reset-cells = <1>;
+ };
+
+ pcie: pcie-controller@180c0000 {
+ compatible = "qcom,ar7240-pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0x0>;
+ reg = <0x180c0000 0x1000>, /* CRP */
+ <0x180f0000 0x100>, /* CTRL */
+ <0x14000000 0x1000>; /* CFG */
+ reg-names = "crp_base", "ctrl_base", "cfg_base";
+ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
+ 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+
+ resets = <&rst 6>, <&rst 7>;
+ reset-names = "hc", "phy";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-map-mask = <0 0 0 1>;
+ interrupt-map = <0 0 0 0 &pcie 0>;
+ status = "disabled";
+ };
+ };
+
+ spi: spi@1f000000 {
+ compatible = "qca,ar7240-spi",
+ "qca,ar7100-spi";
+ reg = <0x1f000000 0x10>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "ahb";
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&cpuintc {
+ qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+ <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+};
diff --git a/target/linux/ath79/dts/ar724x_senao_loader-4k.dtsi b/target/linux/ath79/dts/ar724x_senao_loader-4k.dtsi
new file mode 100644
index 0000000..0dff79e
--- /dev/null
+++ b/target/linux/ath79/dts/ar724x_senao_loader-4k.dtsi
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+ virtual_flash {
+ compatible = "mtd-concat";
+
+ devices = <&fwconcat0 &fwconcat1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <0x73714f4b>;
+ label = "firmware";
+ reg = <0x0 0x0>;
+ };
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ label = "custom";
+ reg = <0x50000 0x50000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "loader";
+ reg = <0xa0000 0x1000>;
+ };
+
+ fwconcat1: partition@a1000 {
+ label = "fwconcat1";
+ reg = <0xa1000 0xff000>;
+ };
+
+ fwconcat0: partition@1a0000 {
+ label = "fwconcat0";
+ reg = <0x1a0000 0x4d0000>;
+ };
+
+ partition@670000 {
+ label = "failsafe";
+ reg = <0x670000 0x180000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar724x_senao_loader-64k.dtsi b/target/linux/ath79/dts/ar724x_senao_loader-64k.dtsi
new file mode 100644
index 0000000..831f038
--- /dev/null
+++ b/target/linux/ath79/dts/ar724x_senao_loader-64k.dtsi
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+ virtual_flash {
+ compatible = "mtd-concat";
+
+ devices = <&fwconcat0 &fwconcat1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <0x73714f4b>;
+ label = "firmware";
+ reg = <0x0 0x0>;
+ };
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ label = "custom";
+ reg = <0x50000 0x50000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "loader";
+ reg = <0xa0000 0x10000>;
+ };
+
+ fwconcat1: partition@b0000 {
+ label = "fwconcat1";
+ reg = <0xb0000 0xf0000>;
+ };
+
+ fwconcat0: partition@1a0000 {
+ label = "fwconcat0";
+ reg = <0x1a0000 0x4d0000>;
+ };
+
+ partition@670000 {
+ label = "failsafe";
+ reg = <0x670000 0x180000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar724x_ubnt_xm.dtsi b/target/linux/ath79/dts/ar724x_ubnt_xm.dtsi
new file mode 100644
index 0000000..77dbfc4
--- /dev/null
+++ b/target/linux/ath79/dts/ar724x_ubnt_xm.dtsi
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0x750000>;
+ };
+
+ partition@7a0000 {
+ label = "board_config";
+ reg = <0x7a0000 0x010000>;
+ read-only;
+ };
+
+ partition@7b0000 {
+ label = "cfg";
+ reg = <0x7b0000 0x040000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ wifi: wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x6>;
+};
diff --git a/target/linux/ath79/dts/ar724x_ubnt_xm_outdoor.dtsi b/target/linux/ath79/dts/ar724x_ubnt_xm_outdoor.dtsi
new file mode 100644
index 0000000..eab08d1
--- /dev/null
+++ b/target/linux/ath79/dts/ar724x_ubnt_xm_outdoor.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/ {
+ aliases {
+ led-boot = &led_link4;
+ led-failsafe = &led_link4;
+ label-mac-device = &wifi;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ link1 {
+ label = "red:link1";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ link2 {
+ label = "orange:link2";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ link3 {
+ label = "green:link3";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_link4: link4 {
+ label = "green:link4";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar9132.dtsi b/target/linux/ath79/dts/ar9132.dtsi
new file mode 100644
index 0000000..37fc32e
--- /dev/null
+++ b/target/linux/ath79/dts/ar9132.dtsi
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ath79.dtsi"
+
+/ {
+ compatible = "qca,ar9132";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips24Kc";
+ clocks = <&pll ATH79_CLK_CPU>;
+ reg = <0>;
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+ <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+
+ apb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&miscintc>;
+
+ ddr_ctrl: memory-controller@18000000 {
+ compatible = "qca,ar9132-ddr-controller",
+ "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x100>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ uart: uart@18020000 {
+ compatible = "ns8250";
+ reg = <0x18020000 0x20>;
+ interrupts = <3>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "uart";
+
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ no-loopback-test;
+ };
+
+ gpio: gpio@18040000 {
+ compatible = "qca,ar9132-gpio",
+ "qca,ar7100-gpio";
+ reg = <0x18040000 0x30>;
+ interrupts = <2>;
+
+ ngpios = <22>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pll: pll-controller@18050000 {
+ compatible = "qca,ar9132-pll",
+ "qca,ar9130-pll", "syscon";
+ reg = <0x18050000 0x20>;
+
+ clock-names = "ref";
+ /* The board must provides the ref clock */
+
+ #clock-cells = <1>;
+ clock-output-names = "cpu", "ddr", "ahb";
+ };
+
+ wdt: wdt@18060008 {
+ compatible = "qca,ar7130-wdt";
+ reg = <0x18060008 0x8>;
+
+ interrupts = <4>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "wdt";
+ };
+
+ miscintc: interrupt-controller@18060010 {
+ compatible = "qca,ar9132-misc-intc",
+ "qca,ar7100-misc-intc";
+ reg = <0x18060010 0x8>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ rst: reset-controller@1806001c {
+ compatible = "qca,ar9132-reset",
+ "qca,ar7100-reset";
+ reg = <0x1806001c 0x4>;
+
+ #reset-cells = <1>;
+ };
+ };
+
+ usb: usb@1b000100 {
+ compatible = "qca,ar7100-ehci", "generic-ehci";
+ reg = <0x1b000100 0x100>;
+
+ interrupts = <3>;
+ resets = <&rst 5>;
+
+ has-transaction-translator;
+
+ phy-names = "usb";
+ phys = <&usb_phy>;
+
+ status = "disabled";
+ };
+
+ spi: spi@1f000000 {
+ compatible = "qca,ar9132-spi", "qca,ar7100-spi";
+ reg = <0x1f000000 0x10>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "ahb";
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ wmac: wmac@180c0000 {
+ compatible = "qca,ar9130-wmac";
+ reg = <0x180c0000 0x230000>;
+
+ interrupts = <2>;
+
+ status = "disabled";
+ };
+ };
+
+ usb_phy: usb-phy {
+ compatible = "qca,ar7200-usb-phy";
+
+ reset-names = "usb-phy", "usb-suspend-override";
+ resets = <&rst 4>, <&rst 3>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+};
+
+ð0 {
+ compatible = "qca,ar9130-eth", "syscon";
+ reg = <0x19000000 0x200
+ 0x18070000 0x4>;
+ pll-data = <0x1a000000 0x13000a44 0x00441099>;
+ pll-reg = <0x4 0x14 20>;
+ pll-handle = <&pll>;
+ resets = <&rst 9>;
+ reset-names = "mac";
+ qca,mac-idx = <0>;
+};
diff --git a/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh-rb.dts b/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh-rb.dts
new file mode 100644
index 0000000..52b0c86
--- /dev/null
+++ b/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh-rb.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9132_buffalo_wzr-hp-g300nh.dtsi"
+
+/ {
+ compatible = "buffalo,wzr-hp-g300nh-rb", "qca,ar9132";
+ model = "Buffalo WZR-HP-G300NH (rtl8366rb)";
+};
+
+&switch {
+ status = "okay";
+
+ compatible = "realtek,rtl8366rb";
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x1f000000 0x13000a44 0x00441099>;
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x100 0x13000a44 0x00441099>;
+};
diff --git a/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh-s.dts b/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh-s.dts
new file mode 100644
index 0000000..1c4da1e
--- /dev/null
+++ b/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh-s.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9132_buffalo_wzr-hp-g300nh.dtsi"
+
+/ {
+ compatible = "buffalo,wzr-hp-g300nh-s", "qca,ar9132";
+ model = "Buffalo WZR-HP-G300NH (rtl8366s)";
+};
+
+&switch {
+ status = "okay";
+
+ compatible = "realtek,rtl8366s";
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x1e000100 0x13000a44 0x00441099>;
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x1e000100 0x13000a44 0x00441099>;
+};
diff --git a/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh.dtsi b/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh.dtsi
new file mode 100644
index 0000000..9bd4656
--- /dev/null
+++ b/target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh.dtsi
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9132.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_diag;
+ led-failsafe = &led_security;
+ led-upgrade = &led_diag;
+ };
+
+ clock40mhz: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
+ gpio2: gpio-extender {
+ compatible = "nxp,74hc153-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ // GPIOs used by this node
+ gpio-s0 = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ gpio-s1 = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ gpio-1y = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ gpio-2y = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ aoss {
+ label = "aoss";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ router_on {
+ label = "router_on";
+ linux,code = <BTN_5>;
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ movie_off {
+ label = "movie_off";
+ linux,code = <BTN_3>;
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ usb {
+ label = "usb";
+ linux,code = <BTN_2>;
+ gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ router_auto {
+ label = "router_auto";
+ linux,code = <BTN_6>;
+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ movie_on {
+ label = "movie_on";
+ linux,code = <BTN_4>;
+ gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+
+ flash@1e000000 {
+ compatible = "cfi-flash";
+ reg = <0x1e000000 0x2000000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x0040000 0x0020000>;
+ read-only;
+ };
+
+ partition@60000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x0060000 0x1f60000>;
+ };
+
+ partition@1fc0000 {
+ label = "user_property";
+ reg = <0x1fc0000 0x0020000>;
+ read-only;
+ };
+
+ art: partition@1fe0000 {
+ label = "art";
+ reg = <0x1fe0000 0x020000>;
+ read-only;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "blue:usb";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+
+ led_diag: diag {
+ label = "red:diag";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless {
+ label = "green:wireless";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_security: security {
+ label = "amber:security";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ router {
+ label = "green:router";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ switch: switch {
+ status = "disabled";
+
+ gpio-sda = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ mii-bus = <&mdio0>;
+
+ mdio-bus {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-mask = <0x10>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+};
+
+ð0 {
+ status = "disabled";
+
+ phy-mode = "rgmii";
+ mtd-mac-address = <&art 0x1120c>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&mdio1 {
+ status = "okay";
+};
+
+ð1 {
+ status = "disabled";
+
+ compatible = "qca,ar9130-eth", "syscon";
+ reg = <0x1a000000 0x200
+ 0x18070004 0x4>;
+
+ pll-reg = <0x4 0x18 22>;
+ pll-handle = <&pll>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+ resets = <&rst 13>;
+ reset-names = "mac";
+ qca,mac-idx = <1>;
+ mtd-mac-address = <&art 0x1120c>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x11000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&pll {
+ clocks = <&clock40mhz>;
+};
+
+&usb {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/ar9132_tplink_tl-wa901nd-v2.dts b/target/linux/ath79/dts/ar9132_tplink_tl-wa901nd-v2.dts
new file mode 100644
index 0000000..606572a
--- /dev/null
+++ b/target/linux/ath79/dts/ar9132_tplink_tl-wa901nd-v2.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9132.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wa901nd-v2", "qca,ar9132";
+ model = "TP-Link TL-WA901ND v2";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = ð0;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ qss {
+ label = "qss";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ qss {
+ label = "green:qss";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@1 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x3D0000>;
+ };
+
+ art: partition@2 {
+ label = "art";
+ reg = <0x3F0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy12: ethernet-phy@c {
+ reg = <0xc>;
+ phy-mode = "mii";
+
+ resets = <&rst 8>;
+ reset-names = "phy";
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ phy-handle = <&phy12>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/ar9132_tplink_tl-wr1043nd-v1.dts b/target/linux/ath79/dts/ar9132_tplink_tl-wr1043nd-v1.dts
new file mode 100644
index 0000000..3b406e4
--- /dev/null
+++ b/target/linux/ath79/dts/ar9132_tplink_tl-wr1043nd-v1.dts
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9132.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
+ model = "TP-Link TL-WR1043ND v1";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = ð0;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ qss {
+ label = "qss";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "green:usb";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ qss {
+ label = "green:qss";
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ rtl8366rb {
+ compatible = "realtek,rtl8366rb";
+ gpio-sda = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio 19 GPIO_ACTIVE_HIGH>;
+
+ resets = <&rst 8>;
+ reset-names = "switch";
+ };
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x7D0000>;
+ };
+
+ art: partition@7F0000 {
+ label = "art";
+ reg = <0x7F0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/ar9132_tplink_tl-wr941-v2.dts b/target/linux/ath79/dts/ar9132_tplink_tl-wr941-v2.dts
new file mode 100644
index 0000000..821c2ae
--- /dev/null
+++ b/target/linux/ath79/dts/ar9132_tplink_tl-wr941-v2.dts
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9132.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wr941-v2", "qca,ar9132";
+ model = "TP-Link TL-WR941N/ND v2/v3";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ qss {
+ label = "qss";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ qss_r {
+ label = "red:qss";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ qss_g {
+ label = "green:qss";
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ switch@0 {
+ compatible = "marvell,mv88e6060";
+ reg = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "wan";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <ð0>;
+ };
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x3d0000>;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-mode = "rmii";
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/ar9330.dtsi b/target/linux/ath79/dts/ar9330.dtsi
new file mode 100644
index 0000000..7607fed
--- /dev/null
+++ b/target/linux/ath79/dts/ar9330.dtsi
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ath79.dtsi"
+
+/ {
+ compatible = "qca,ar9330";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &uart;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips24Kc";
+ clocks = <&pll ATH79_CLK_CPU>;
+ reg = <0>;
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyATH0,115200";
+ };
+
+ ahb {
+ apb {
+ ddr_ctrl: memory-controller@18000000 {
+ compatible = "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x100>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ uart: uart@18020000 {
+ compatible = "qca,ar9330-uart";
+ reg = <0x18020000 0x14>;
+
+ interrupts = <3>;
+
+ clocks = <&pll ATH79_CLK_REF>;
+ clock-names = "uart";
+ };
+
+ gpio: gpio@18040000 {
+ compatible = "qca,ar7100-gpio";
+ reg = <0x18040000 0x34>;
+ interrupts = <2>;
+
+ ngpios = <30>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pinmux: pinmux@18040028 {
+ compatible = "pinctrl-single";
+ reg = <0x18040028 0x8>;
+
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x1>;
+ #pinctrl-cells = <2>;
+
+ jtag_disable_pins: pinmux_jtag_disable_pins {
+ pinctrl-single,bits = <0x0 0x1 0x1>;
+ };
+
+ switch_led_disable_pins: pinmux_switch_led_disable_pins {
+ pinctrl-single,bits = <0x0 0x0 0xf8>;
+ };
+ };
+
+ pll: pll-controller@18050000 {
+ compatible = "qca,ar9330-pll";
+ reg = <0x18050000 0x100>;
+
+ #clock-cells = <1>;
+ };
+
+ wdt: wdt@18060008 {
+ compatible = "qca,ar7130-wdt";
+ reg = <0x18060008 0x8>;
+
+ interrupts = <4>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "wdt";
+ };
+
+ rst: reset-controller@1806001c {
+ compatible = "qca,ar7100-reset";
+ reg = <0x1806001c 0x4>;
+
+ #reset-cells = <1>;
+ };
+ };
+
+ usb: usb@1b000000 {
+ compatible = "chipidea,usb2";
+ reg = <0x1b000000 0x200>;
+
+ interrupts = <3>;
+ resets = <&rst 5>;
+ reset-names = "usb-host";
+
+ phy-names = "usb-phy";
+ phys = <&usb_phy>;
+
+ status = "disabled";
+ };
+
+ spi: spi@1f000000 {
+ compatible = "qca,ar934x-spi";
+ reg = <0x1f000000 0x1c>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ gmac: gmac@18070000 {
+ compatible = "qca,ar9330-gmac";
+ reg = <0x18070000 0x4>;
+ };
+
+ wmac: wmac@18100000 {
+ compatible = "qca,ar9330-wmac";
+ reg = <0x18100000 0x20000>;
+
+ interrupts = <2>;
+
+ status = "disabled";
+ };
+ };
+
+ usb_phy: usb-phy {
+ compatible = "qca,ar7200-usb-phy";
+
+ reset-names = "usb-phy", "usb-suspend-override";
+ resets = <&rst 4>, <&rst 3>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+};
+
+&cpuintc {
+ qca,ddr-wb-channel-interrupts = <2>, <3>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>;
+};
+
+ð0 {
+ compatible = "qca,ar9330-eth", "syscon";
+
+ pll-data = <0x00110000 0x00001099 0x00991099>;
+
+ resets = <&rst 9>;
+ reset-names = "mac";
+ phy-handle = <&swphy4>;
+};
+
+&mdio1 {
+ status = "okay";
+ compatible = "qca,ar9330-mdio";
+
+ resets = <&rst 23>;
+ reset-names = "mdio";
+ builtin-switch;
+
+ builtin_switch: switch0@1f {
+ compatible = "qca,ar7240sw";
+ reg = <0x1f>;
+ resets = <&rst 8>;
+ reset-names = "switch";
+ qca,mib-poll-interval = <500>;
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ swphy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "mii";
+ };
+ };
+ };
+};
+
+ð1 {
+ compatible = "qca,ar9330-eth", "syscon";
+
+ pll-data = <0x00110000 0x00001099 0x00991099>;
+ phy-mode = "gmii";
+
+ resets = <&rst 13>;
+ reset-names = "mac";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9330_dlink_dir-505.dts b/target/linux/ath79/dts/ar9330_dlink_dir-505.dts
new file mode 100644
index 0000000..ad48e07
--- /dev/null
+++ b/target/linux/ath79/dts/ar9330_dlink_dir-505.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9330.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "D-Link DIR-505";
+ compatible = "dlink,dir-505", "qca,ar9330";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_status_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_status_red;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "WPS button";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "Reset button";
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ led_power_green: power {
+ label = "green:power";
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_red: status {
+ label = "red:status";
+ gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio {
+ led_enable {
+ gpio-hog;
+ output-low;
+ gpios = <1 GPIO_ACTIVE_LOW>;
+ line-name = "d-link:power:led";
+ };
+};
+
+&usb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ art: partition@10000 {
+ label = "art";
+ reg = <0x10000 0x10000>;
+ read-only;
+ };
+
+ mac: partition@20000 {
+ label = "mac";
+ reg = <0x20000 0x10000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "nvram";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "language";
+ reg = <0x40000 0x40000>;
+ read-only;
+ };
+
+ partition@80000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x80000 0x780000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ qca,no-eeprom;
+};
diff --git a/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts b/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts
new file mode 100644
index 0000000..6a13c1b
--- /dev/null
+++ b/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9330.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "GL.iNet GL-AR150";
+ compatible = "glinet,gl-ar150", "qca,ar9330";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ label-mac-device = ð0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "orange:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ configurable {
+ label = "green:configurable";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ manual {
+ label = "manual";
+ linux,code = <BTN_7>;
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ auto {
+ label = "auto";
+ linux,code = <BTN_8>;
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&usb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@2 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ art: partition@3 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x0>;
+};
diff --git a/target/linux/ath79/dts/ar9330_openmesh_om2p-lc.dts b/target/linux/ath79/dts/ar9330_openmesh_om2p-lc.dts
new file mode 100644
index 0000000..7383df5
--- /dev/null
+++ b/target/linux/ath79/dts/ar9330_openmesh_om2p-lc.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9330_openmesh_om2p.dtsi"
+
+/ {
+ compatible = "openmesh,om2p-lc", "qca,ar9330";
+ model = "OpenMesh OM2P-LC";
+};
diff --git a/target/linux/ath79/dts/ar9330_openmesh_om2p-v2.dts b/target/linux/ath79/dts/ar9330_openmesh_om2p-v2.dts
new file mode 100644
index 0000000..659a1c7
--- /dev/null
+++ b/target/linux/ath79/dts/ar9330_openmesh_om2p-v2.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9330_openmesh_om2p.dtsi"
+
+/ {
+ compatible = "openmesh,om2p-v2", "qca,ar9330";
+ model = "OpenMesh OM2P v2";
+};
diff --git a/target/linux/ath79/dts/ar9330_openmesh_om2p.dtsi b/target/linux/ath79/dts/ar9330_openmesh_om2p.dtsi
new file mode 100644
index 0000000..4f428cb
--- /dev/null
+++ b/target/linux/ath79/dts/ar9330_openmesh_om2p.dtsi
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9330.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ /delete-property/ bootargs;
+ };
+
+ aliases {
+ led-boot = &led_power_blue;
+ led-failsafe = &led_power_blue;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_blue;
+ label-mac-device = ð1;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&switch_led_disable_pins>;
+
+ wifi_yellow {
+ label = "yellow:wifi";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_blue: power_blue {
+ label = "blue:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ lan_blue {
+ label = "blue:lan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi_green {
+ label = "green:wifi";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi_red {
+ label = "red:wifi";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_blue {
+ label = "blue:wan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ /* hw_margin_ms is actually 300s but driver limits it to 60s */
+ hw_margin_ms = <60000>;
+ always-running;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ /* partitions are passed via bootloader */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x040000>;
+ };
+
+ partition@80000 {
+ label = "custom";
+ reg = <0x080000 0x140000>;
+ read-only;
+ };
+
+ partition@1c0000 {
+ label = "inactive";
+ reg = <0x1c0000 0x700000>;
+ };
+
+ partition@8c0000 {
+ label = "inactive2";
+ reg = <0x8c0000 0x700000>;
+ };
+
+ art: partition@fc0000 {
+ label = "ART";
+ reg = <0xfc0000 0x040000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x6>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9330_pqi_air-pen.dts b/target/linux/ath79/dts/ar9330_pqi_air-pen.dts
new file mode 100644
index 0000000..607ee5f
--- /dev/null
+++ b/target/linux/ath79/dts/ar9330_pqi_air-pen.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9330.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "PQI Air-Pen";
+ compatible = "pqi,air-pen", "qca,ar9330";
+
+ aliases {
+ led-boot = &led_wlan;
+ led-failsafe = &led_wlan;
+ led-upgrade = &led_wlan;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_wlan: wlan {
+ label = "blue:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wps {
+ label = "blue:wps";
+ gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&usb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "NVRAM";
+ reg = <0x060000 0x010000>;
+ read-only;
+ };
+
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0x780000>;
+ };
+
+ partition@7f0000 {
+ label = "CONF";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x1002>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ compatible = "syscon", "simple-mfd";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x2>;
+};
diff --git a/target/linux/ath79/dts/ar9331.dtsi b/target/linux/ath79/dts/ar9331.dtsi
new file mode 100644
index 0000000..2141f33
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9330.dtsi"
+
+/ {
+ compatible = "qca,ar9331";
+
+ ref: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9331_8dev_carambola2.dts b/target/linux/ath79/dts/ar9331_8dev_carambola2.dts
new file mode 100644
index 0000000..ba01d25
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_8dev_carambola2.dts
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "8devices Carambola2";
+ compatible = "8dev,carambola2", "qca,ar9331";
+
+ aliases {
+ label-mac-device = &wmac;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ eth0 {
+ label = "orange:eth0";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ eth1 {
+ label = "orange:eth1";
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&usb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfa0000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+ mtd-mac-address = <&art 0x0>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <1>;
+ switch-phy-swap = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+ mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9331_alfa-network_ap121f.dts b/target/linux/ath79/dts/ar9331_alfa-network_ap121f.dts
new file mode 100644
index 0000000..0465109
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_alfa-network_ap121f.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331_alfa-network_ap121f.dtsi"
+
+/ {
+ model = "ALFA Network AP121F";
+ compatible = "alfa-network,ap121f", "qca,ar9331";
+};
+
+&usb {
+ dr_mode = "host";
+};
diff --git a/target/linux/ath79/dts/ar9331_alfa-network_ap121f.dtsi b/target/linux/ath79/dts/ar9331_alfa-network_ap121f.dtsi
new file mode 100644
index 0000000..7734f20
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_alfa-network_ap121f.dtsi
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = &wmac;
+ led-boot = &led_vpn;
+ led-failsafe = &led_vpn;
+ led-upgrade = &led_vpn;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ switch {
+ label = "switch";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ led_vpn: vpn {
+ label = "green:vpn";
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ compatible = "syscon", "simple-mfd";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x030000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x030000 0x010000>;
+ };
+
+ art: partition@40000 {
+ label = "art";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9331_alfa-network_ap121fe.dts b/target/linux/ath79/dts/ar9331_alfa-network_ap121fe.dts
new file mode 100644
index 0000000..873e92c
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_alfa-network_ap121fe.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331_alfa-network_ap121f.dtsi"
+
+/ {
+ model = "ALFA Network AP121FE";
+ compatible = "alfa-network,ap121fe", "qca,ar9331";
+};
+
+&usb {
+ dr_mode = "peripheral";
+};
diff --git a/target/linux/ath79/dts/ar9331_arduino_yun.dts b/target/linux/ath79/dts/ar9331_arduino_yun.dts
new file mode 100644
index 0000000..389a83d
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_arduino_yun.dts
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Arduino Yun";
+ compatible = "arduino,yun", "qca,ar9331";
+
+ chosen {
+ bootargs = "console=ttyATH0,250000";
+ };
+
+ ahb {
+ apb {
+ pinmux_extended: pinmux@18040030 {
+ compatible = "pinctrl-single";
+ reg = <0x18040030 0x4>;
+
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x1>;
+ #pinctrl-cells = <2>;
+
+ enable_gpio11: pinmux_enable_gpio11 {
+ pinctrl-single,bits = <0x0 0x200 0x200>;
+ };
+ };
+
+ pinmux_bootstrap: pinmux@180600ac {
+ compatible = "pinctrl-single";
+ reg = <0x180600ac 0x4>;
+
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x1>;
+ #pinctrl-cells = <2>;
+
+ enable_gpio26_gpio27: pinmux_enable_gpio26_gpio27 {
+ pinctrl-single,bits = <0x0 0x40000 0x40000>;
+ };
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "blue:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ usb {
+ label = "white:usb";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&hub_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ config {
+ label = "config";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_spi_enable {
+ gpio-export,name = "yun:oe:spi";
+ gpio-export,output = <0>;
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_handshake_enable {
+ gpio-export,name = "yun:oe:hs";
+ gpio-export,output = <0>;
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_uart_enable {
+ gpio-export,name = "yun:oe:uart";
+ gpio-export,output = <0>;
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_usb_vbus: reg_usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ };
+};
+
+&pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins>;
+};
+
+&switch_led_disable_pins {
+ pinctrl-single,bits = <0x0 0x80 0xf8>;
+};
+
+&pinmux_extended {
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio11>;
+};
+
+&pinmux_bootstrap {
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio26_gpio27>;
+};
+
+&usb {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dr_mode = "host";
+ vbus-supply = <®_usb_vbus>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ #trigger-source-cells = <0>;
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xf90000>;
+ };
+
+ partition@fe0000 {
+ label = "nvram";
+ reg = <0xfe0000 0x10000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+};
+
+ð1 {
+ status = "okay";
+
+ compatible = "syscon", "simple-mfd";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts b/target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts
new file mode 100644
index 0000000..48bf4d1
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Embedded Wireless Dorin";
+ compatible = "embeddedwireless,dorin", "qca,ar9331";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "green:status";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&usb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@2 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ art: partition@3 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x1002>;
+ mtd-mac-address-increment-byte = <3>;
+ mtd-mac-address-increment = <0x40>;
+};
+
+&mdio1 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9331_etactica_eg200.dts b/target/linux/ath79/dts/ar9331_etactica_eg200.dts
new file mode 100644
index 0000000..95c8a10
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_etactica_eg200.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "eTactica EG200";
+ compatible = "etactica,eg200", "qca,ar9331";
+
+ aliases {
+ led-boot = &led_etactica;
+ led-failsafe = &led_etactica;
+ led-upgrade = &led_etactica;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ restore {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&switch_led_disable_pins>;
+
+ modbus {
+ label = "red:modbus";
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_etactica: etactica {
+ label = "red:etactica";
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ eth0 {
+ label = "red:eth0";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "red:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&usb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+ mtd-mac-address = <&art 0x0>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-addr-swap = <1>;
+ switch-phy-swap = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+ compatible = "syscon", "simple-mfd";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot@0 {
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ uboot-env@40000 {
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ firmware@50000 {
+ compatible = "denx,uimage";
+ reg = <0x50000 0xfa0000>;
+ };
+
+ art: art@ff0000 {
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9331_glinet_6408.dts b/target/linux/ath79/dts/ar9331_glinet_6408.dts
new file mode 100644
index 0000000..658fa1a
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_glinet_6408.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331_glinet_64xx.dtsi"
+
+/ {
+ model = "GL.iNet 6408";
+ compatible = "glinet,6408", "qca,ar9331";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ reg = <0x20000 0x7d0000>;
+ label = "firmware";
+ };
+
+ art: partition@7f0000 {
+ reg = <0x7f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar9331_glinet_6416.dts b/target/linux/ath79/dts/ar9331_glinet_6416.dts
new file mode 100644
index 0000000..189563a
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_glinet_6416.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331_glinet_64xx.dtsi"
+
+/ {
+ model = "GL.iNet 6416";
+ compatible = "glinet,6416", "qca,ar9331";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ reg = <0x20000 0xfd0000>;
+ label = "firmware";
+ };
+
+ art: partition@ff0000 {
+ reg = <0xff0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar9331_glinet_64xx.dtsi b/target/linux/ath79/dts/ar9331_glinet_64xx.dtsi
new file mode 100644
index 0000000..2f92123
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_glinet_64xx.dtsi
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = &wmac;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "red:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ reg_usb_vbus: reg_usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+
+&usb {
+ dr_mode = "host";
+ vbus-supply = <®_usb_vbus>;
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/ar9331_glinet_gl-mifi.dts b/target/linux/ath79/dts/ar9331_glinet_gl-mifi.dts
new file mode 100644
index 0000000..7d6e7bd
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_glinet_gl-mifi.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "glinet,gl-mifi", "qca,ar9331";
+ model = "GL.iNet GL-MiFi";
+
+ aliases {
+ label-mac-device = ð0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+ };
+
+ 3g4g {
+ label = "green:3g4g";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+
+ reg_usb_vbus: reg_usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ minipcie {
+ gpio-export,name = "minipcie";
+ gpio-export,output = <0>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb {
+ status = "okay";
+
+ dr_mode = "host";
+ vbus-supply = <®_usb_vbus>;
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9331_glinet_gl-usb150.dts b/target/linux/ath79/dts/ar9331_glinet_gl-usb150.dts
new file mode 100644
index 0000000..d1c2654
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_glinet_gl-usb150.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "glinet,gl-usb150", "qca,ar9331";
+ model = "GL.iNet GL-USB150";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ label-mac-device = ð0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_lan_reset {
+ gpio-export,name = "lan:reset";
+ gpio-export,output = <0>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ compatible = "syscon", "simple-mfd";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9331_hak5_lan-turtle.dts b/target/linux/ath79/dts/ar9331_hak5_lan-turtle.dts
new file mode 100644
index 0000000..6a756ed
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_hak5_lan-turtle.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331_hak5_lan-turtle.dtsi"
+
+/ {
+ model = "Hak5 LAN Turtle";
+ compatible = "hak5,lan-turtle", "qca,ar9331";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&switch_led_disable_pins>;
+
+ led_system: system {
+ label = "orange:system";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar9331_hak5_lan-turtle.dtsi b/target/linux/ath79/dts/ar9331_hak5_lan-turtle.dtsi
new file mode 100644
index 0000000..3f20843
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_hak5_lan-turtle.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ keys: keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio11>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <1>;
+ switch-phy-swap = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
+
+&pinmux {
+ enable_gpio11: pinmux_enable_gpio11 {
+ pinctrl-single,bits = <0x0 0x0 0x4>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0xfd0000>;
+ compatible = "tplink,firmware";
+ };
+
+ partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/ar9331_hak5_packet-squirrel.dts b/target/linux/ath79/dts/ar9331_hak5_packet-squirrel.dts
new file mode 100644
index 0000000..787dbed
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_hak5_packet-squirrel.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331_hak5_lan-turtle.dtsi"
+
+/ {
+ model = "Hak5 Packet Squirrel";
+ compatible = "hak5,packet-squirrel", "qca,ar9331";
+
+ aliases {
+ led-boot = &led_system_green;
+ led-failsafe = &led_system_green;
+ led-running = &led_system_green;
+ led-upgrade = &led_system_green;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system_green: system-green {
+ label = "green:system";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ system-blue {
+ label = "blue:system";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+
+ system-red {
+ label = "red:system";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&keys {
+ sw1 {
+ label = "sw1";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ sw2 {
+ label = "sw2";
+ linux,code = <BTN_1>;
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ sw3 {
+ label = "sw3";
+ linux,code = <BTN_2>;
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ sw4 {
+ label = "sw4";
+ linux,code = <BTN_3>;
+ gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9331_hak5_wifi-pineapple-nano.dts b/target/linux/ath79/dts/ar9331_hak5_wifi-pineapple-nano.dts
new file mode 100644
index 0000000..62d5cae
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_hak5_wifi-pineapple-nano.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Hak5 WiFi Pineapple NANO";
+ compatible = "hak5,wifi-pineapple-nano", "qca,ar9331";
+
+ aliases {
+ label-mac-device = &wmac;
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ microsd-detect {
+ gpio-export,name = "microsd-detect";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+
+ usb-alarm {
+ gpio-export,name = "usb-alarm";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ usb-power {
+ gpio-export,name = "usb-power";
+ gpio-export,output = <0>;
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "blue:system";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x6>;
+};
+
+ð1 {
+ status = "okay";
+
+ compatible = "syscon", "simple-mfd";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0xfd0000>;
+ compatible = "tplink,firmware";
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9331_onion_omega.dts b/target/linux/ath79/dts/ar9331_onion_omega.dts
new file mode 100644
index 0000000..4039b9e
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_onion_omega.dts
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Onion Omega";
+ compatible = "onion,omega", "qca,ar9331";
+
+ aliases {
+ serial0 = &uart;
+ label-mac-device = &wmac;
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "amber:system";
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+
+ reg_usb_vbus: reg_usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&usb {
+ status = "okay";
+
+ vbus-supply = <®_usb_vbus>;
+ dr_mode = "host";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+
+ compatible = "syscon", "simple-mfd";
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-addr-swap = <4>;
+ switch-phy-swap = <4>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <25000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0xfd0000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/ar9331_pisen_ts-d084.dts b/target/linux/ath79/dts/ar9331_pisen_ts-d084.dts
new file mode 100644
index 0000000..8737620
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_pisen_ts-d084.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Pisen TS-D084";
+ compatible = "pisen,ts-d084", "qca,ar9331";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = &wmac;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "blue:system";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ firmware: partition@20000 {
+ compatible = "tplink,firmware";
+ reg = <0x20000 0x7d0000>;
+ label = "firmware";
+ };
+
+ art: partition@7f0000 {
+ reg = <0x7f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+ð1 {
+ status = "okay";
+ compatible = "syscon", "simple-mfd";
+};
+
+&usb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/ar9331_pisen_wmm003n.dts b/target/linux/ath79/dts/ar9331_pisen_wmm003n.dts
new file mode 100644
index 0000000..3a18249
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_pisen_wmm003n.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Pisen WMM003N";
+ compatible = "pisen,wmm003n", "qca,ar9331";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "blue:system";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_usb_vbus: reg_usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ firmware: partition@20000 {
+ compatible = "tplink,firmware";
+ reg = <0x20000 0x7d0000>;
+ label = "firmware";
+ };
+
+ art: partition@7f0000 {
+ reg = <0x7f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+ð1 {
+ status = "okay";
+ compatible = "syscon", "simple-mfd";
+};
+
+&usb {
+ dr_mode = "host";
+ vbus-supply = <®_usb_vbus>;
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-mr10u.dts b/target/linux/ath79/dts/ar9331_tplink_tl-mr10u.dts
new file mode 100644
index 0000000..3597a0d
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_tplink_tl-mr10u.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331_tplink_tl-wr703n_tl-mr10u.dtsi"
+
+/ {
+ model = "TP-Link TL-MR10U";
+ compatible = "tplink,tl-mr10u", "qca,ar9331";
+};
+
+®_usb_vbus {
+ gpio = <&gpio 18 GPIO_ACTIVE_HIGH>;
+};
diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-mr3020-v1.dts b/target/linux/ath79/dts/ar9331_tplink_tl-mr3020-v1.dts
new file mode 100644
index 0000000..7df4ed9
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_tplink_tl-mr3020-v1.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "TP-Link TL-MR3020 V1";
+ compatible = "tplink,tl-mr3020-v1", "qca,ar9331";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-running = &led_wps;
+ led-upgrade = &led_wps;
+ label-mac-device = ð0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wps: wps {
+ label = "green:wps";
+ gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+ };
+
+ led3g {
+ label = "green:3g";
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ sw1 {
+ label = "sw1";
+ linux,input-type = <EV_SW>;
+ linux,code = <BTN_0>;
+ gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ sw2 {
+ label = "sw2";
+ linux,input-type = <EV_SW>;
+ linux,code = <BTN_1>;
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+
+ reg_usb_vbus: reg_usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dr_mode = "host";
+ vbus-supply = <®_usb_vbus>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ /* Spansion S25FL032PIF SPI flash */
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x3c0000>;
+ };
+
+ partition@3e0000 {
+ label = "config";
+ reg = <0x3e0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ compatible = "syscon", "simple-mfd";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-mr3040-v2.dts b/target/linux/ath79/dts/ar9331_tplink_tl-mr3040-v2.dts
new file mode 100644
index 0000000..6c35337
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_tplink_tl-mr3040-v2.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "TP-Link TL-MR3040 V2";
+ compatible = "tplink,tl-mr3040-v2", "qca,ar9331";
+
+ aliases {
+ led-boot = &led_lan;
+ led-failsafe = &led_lan;
+ label-mac-device = ð0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&switch_led_disable_pins>;
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_lan: lan {
+ label = "green:lan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ led3g {
+ label = "green:3g";
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ sw1 {
+ label = "sw1";
+ linux,input-type = <EV_SW>;
+ linux,code = <BTN_0>;
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ sw2 {
+ label = "sw2";
+ linux,input-type = <EV_SW>;
+ linux,code = <BTN_1>;
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+
+ reg_usb_vbus: reg_usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dr_mode = "host";
+ vbus-supply = <®_usb_vbus>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x3d0000>;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ compatible = "syscon", "simple-mfd";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr703n.dts b/target/linux/ath79/dts/ar9331_tplink_tl-wr703n.dts
new file mode 100644
index 0000000..0806bcc
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr703n.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331_tplink_tl-wr703n_tl-mr10u.dtsi"
+
+/ {
+ model = "TP-Link TL-WR703N";
+ compatible = "tplink,tl-wr703n", "qca,ar9331";
+};
+
+®_usb_vbus {
+ gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+};
diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr703n_tl-mr10u.dtsi b/target/linux/ath79/dts/ar9331_tplink_tl-wr703n_tl-mr10u.dtsi
new file mode 100644
index 0000000..e31640b
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr703n_tl-mr10u.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "blue:system";
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_usb_vbus: reg_usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ reg = <0x20000 0x3d0000>;
+ label = "firmware";
+ };
+
+ art: partition@3f0000 {
+ reg = <0x3f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ compatible = "syscon", "simple-mfd";
+};
+
+&usb {
+ dr_mode = "host";
+ vbus-supply = <®_usb_vbus>;
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-8m.dtsi b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-8m.dtsi
new file mode 100644
index 0000000..759e765
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-8m.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331_tplink_tl-wr710n.dtsi"
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ reg = <0x20000 0x7d0000>;
+ label = "firmware";
+ };
+
+ art: partition@7f0000 {
+ reg = <0x7f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v1.dts b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v1.dts
new file mode 100644
index 0000000..3a0db9f
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331_tplink_tl-wr710n-8m.dtsi"
+
+/ {
+ model = "TP-Link TL-WR710N v1";
+ compatible = "tplink,tl-wr710n-v1", "qca,ar9331";
+};
diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v2.1.dts b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v2.1.dts
new file mode 100644
index 0000000..4cc8023
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v2.1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331_tplink_tl-wr710n-8m.dtsi"
+
+/ {
+ model = "TP-Link TL-WR710N v2.1";
+ compatible = "tplink,tl-wr710n-v2.1", "qca,ar9331";
+};
diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr710n.dtsi b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n.dtsi
new file mode 100644
index 0000000..7d2cbeb
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n.dtsi
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_usb_vbus: regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+&usb {
+ status = "okay";
+
+ dr_mode = "host";
+ vbus-supply = <®_usb_vbus>;
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr740n-v4.dts b/target/linux/ath79/dts/ar9331_tplink_tl-wr740n-v4.dts
new file mode 100644
index 0000000..43f0484
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr740n-v4.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331_tplink_tl-wr741nd-v4.dtsi"
+
+/ {
+ model = "TP-Link TL-WR740N v4";
+ compatible = "tplink,tl-wr740n-v4", "qca,ar9331";
+};
diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr740n-v5.dts b/target/linux/ath79/dts/ar9331_tplink_tl-wr740n-v5.dts
new file mode 100644
index 0000000..99d85c5
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr740n-v5.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331_tplink_tl-wr741nd-v4.dtsi"
+
+/ {
+ model = "TP-Link TL-WR740N v5";
+ compatible = "tplink,tl-wr740n-v5", "qca,ar9331";
+};
diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dts b/target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dts
new file mode 100644
index 0000000..6436db8
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331_tplink_tl-wr741nd-v4.dtsi"
+
+/ {
+ model = "TP-Link TL-WR741N/ND v4";
+ compatible = "tplink,tl-wr741nd-v4", "qca,ar9331";
+};
diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi b/target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi
new file mode 100644
index 0000000..e460e4c
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wr741n-v4", "qca,ar9331";
+ model = "TP-Link TL-WR741N/ND v4";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = &wmac;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&switch_led_disable_pins>;
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan2 {
+ label = "green:lan2";
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan3 {
+ label = "green:lan3";
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan4 {
+ label = "green:lan4";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ qss {
+ label = "green:qss";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ firmware: partition@20000 {
+ compatible = "tplink,firmware";
+ reg = <0x20000 0x3d0000>;
+ label = "firmware";
+ };
+
+ art: partition@3f0000 {
+ reg = <0x3f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <1>;
+ switch-phy-swap = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/ar9341.dtsi b/target/linux/ath79/dts/ar9341.dtsi
new file mode 100644
index 0000000..10161f3
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar934x.dtsi"
+
+/ {
+ compatible = "qca,ar9341";
+};
+
+&cpuintc {
+ qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 4>, <&ddr_ctrl 2>,
+ <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+};
+
+&wmac {
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+};
+
+ð1 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/ar9341_engenius_eap300-v2.dts b/target/linux/ath79/dts/ar9341_engenius_eap300-v2.dts
new file mode 100644
index 0000000..8c87a73
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_engenius_eap300-v2.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9341.dtsi"
+#include "ar934x_senao_loader.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Engenius EAP300 v2";
+ compatible = "engenius,eap300-v2", "qca,ar9341";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "blue:power";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan {
+ label = "blue:wlan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9341_engenius_ens202ext-v1.dts b/target/linux/ath79/dts/ar9341_engenius_ens202ext-v1.dts
new file mode 100644
index 0000000..5c81020
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_engenius_ens202ext-v1.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9341.dtsi"
+#include "ar934x_senao_loader.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Engenius ENS202EXT v1";
+ compatible = "engenius,ens202ext-v1", "qca,ar9341";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "amber:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan {
+ label = "amber:wlan";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ rssilow {
+ label = "red:rssilow";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimedium {
+ label = "amber:rssimedium";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ rssihigh {
+ label = "green:rssihigh";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <1>;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9341_openmesh_om2p-hs-v1.dts b/target/linux/ath79/dts/ar9341_openmesh_om2p-hs-v1.dts
new file mode 100644
index 0000000..e1f14cd
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_openmesh_om2p-hs-v1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9341_openmesh_om2p-hs.dtsi"
+
+/ {
+ compatible = "openmesh,om2p-hs-v1", "qca,ar9341";
+ model = "OpenMesh OM2P-HS v1";
+};
diff --git a/target/linux/ath79/dts/ar9341_openmesh_om2p-hs-v2.dts b/target/linux/ath79/dts/ar9341_openmesh_om2p-hs-v2.dts
new file mode 100644
index 0000000..819a6be
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_openmesh_om2p-hs-v2.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9341_openmesh_om2p-hs.dtsi"
+
+/ {
+ compatible = "openmesh,om2p-hs-v2", "qca,ar9341";
+ model = "OpenMesh OM2P-HS v2";
+};
diff --git a/target/linux/ath79/dts/ar9341_openmesh_om2p-hs-v3.dts b/target/linux/ath79/dts/ar9341_openmesh_om2p-hs-v3.dts
new file mode 100644
index 0000000..e3b15b1
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_openmesh_om2p-hs-v3.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9341_openmesh_om2p-hs.dtsi"
+
+/ {
+ compatible = "openmesh,om2p-hs-v3", "qca,ar9341";
+ model = "OpenMesh OM2P-HS v3";
+};
diff --git a/target/linux/ath79/dts/ar9341_openmesh_om2p-hs.dtsi b/target/linux/ath79/dts/ar9341_openmesh_om2p-hs.dtsi
new file mode 100644
index 0000000..727064d
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_openmesh_om2p-hs.dtsi
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9341.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ /delete-property/ bootargs;
+ };
+
+ aliases {
+ led-boot = &led_power_blue;
+ led-failsafe = &led_power_blue;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_blue;
+ label-mac-device = ð1;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins &led_lan_wan_blue_pin>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_blue: power_blue {
+ label = "blue:power";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wifi_green {
+ label = "green:wifi";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi_red {
+ label = "red:wifi";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi_yellow {
+ label = "yellow:wifi";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan_blue {
+ label = "blue:lan";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_blue {
+ label = "blue:wan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ /* hw_margin_ms is actually 300s but driver limits it to 60s */
+ hw_margin_ms = <60000>;
+ always-running;
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&pinmux {
+ led_lan_wan_blue_pin: pinmux_lan_wan_blue_pin {
+ pinctrl-single,bits = <0x10 0x0 0x0000ffff>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ /* partitions are passed via bootloader */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x040000>;
+ };
+
+ partition@80000 {
+ label = "custom";
+ reg = <0x080000 0x140000>;
+ read-only;
+ };
+
+ partition@1c0000 {
+ label = "inactive";
+ reg = <0x1c0000 0x700000>;
+ };
+
+ partition@8c0000 {
+ label = "inactive2";
+ reg = <0x8c0000 0x700000>;
+ };
+
+ art: partition@fc0000 {
+ label = "ART";
+ reg = <0xfc0000 0x040000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x6>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9341_pcs_cr3000.dts b/target/linux/ath79/dts/ar9341_pcs_cr3000.dts
new file mode 100644
index 0000000..1d742a7
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_pcs_cr3000.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9341.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "PowerCloud Systems CR3000";
+ compatible = "pcs,cr3000", "qca,ar9341";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "amber:power";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "blue:wlan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wan {
+ label = "blue:wan";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "blue:lan1";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "blue:lan2";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "blue:lan3";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "blue:lan4";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0x07a0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ phy-handle = <&swphy4>;
+ pll-data = <0x06000000 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&art 0x0>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <1>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9341_pisen_wmb001n.dts b/target/linux/ath79/dts/ar9341_pisen_wmb001n.dts
new file mode 100644
index 0000000..ffa52b4
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_pisen_wmb001n.dts
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9341.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+ model = "PISEN WMB001N";
+ compatible = "pisen,wmb001n", "qca,ar9341";
+
+ aliases {
+ led-boot = &led_wifi;
+ led-failsafe = &led_wifi;
+ led-running = &led_wifi;
+ led-upgrade = &led_wifi;
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_i2c_gpio &pmx_i2s_spdif>;
+
+ sda-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ /*
+ * Pull-up resistor for scl is missing on this board.
+ * Following settings trick i2c-gpio to use output mode
+ * instead of open-drain for scl.
+ */
+ i2c-gpio,scl-output-only;
+ i2c-gpio,scl-open-drain;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ vol_down {
+ label = "volume down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ vol_up {
+ label = "volume up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ volume1 {
+ label = "blue:volume1";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ volume2 {
+ label = "blue:volume2";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ volume3 {
+ label = "blue:volume3";
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ volume4 {
+ label = "blue:volume4";
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ volume5 {
+ label = "blue:volume5";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_wifi: wifi {
+ label = "blue:wifi";
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ virtual_flash {
+ compatible = "mtd-concat";
+ devices = <&fwconcat0 &fwconcat1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x0>;
+ label = "firmware";
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <IH_MAGIC_OKLI>;
+ };
+ };
+ };
+};
+
+&pinmux {
+ pmx_i2c_gpio: pinmux_i2c_gpio {
+ pinctrl-single,bits = <0x10 0x0 0xff>,
+ <0x14 0x0 0xff>;
+ };
+
+ pmx_i2s_spdif: pinmux_i2s_spdif {
+ pinctrl-single,bits = <0x8 0x0e000000 0xff000000>,
+ <0xc 0x0f0c0d 0xffffff>,
+ <0x14 0x1900 0xff00>;
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "u-boot-env";
+ reg = <0x10000 0x10000>;
+ read-only;
+ };
+
+ fwconcat0: partition@20000 {
+ label = "fwconcat0";
+ reg = <0x20000 0xdc0000>;
+ };
+
+ partition@de0000 {
+ label = "loader";
+ reg = <0xde0000 0x10000>;
+ };
+
+ fwconcat1: partition@df0000 {
+ label = "fwconcat1";
+ reg = <0xdf0000 0x1f0000>;
+ };
+
+ partition@fe0000 {
+ label = "mib0";
+ reg = <0xfe0000 0x10000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+ phy-handle = <&swphy4>;
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+ status = "okay";
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <0>;
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9341_tplink.dtsi b/target/linux/ath79/dts/ar9341_tplink.dtsi
new file mode 100644
index 0000000..26410bc
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_tplink.dtsi
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9341.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ label-mac-device = &wmac;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ qss {
+ label = "green:qss";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "green:lan2";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "green:lan3";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "green:lan4";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins &pmx_usb_power>;
+};
+
+&pinmux {
+ pmx_usb_power: usb_power {
+ pinctrl-single,bits = <0x4 0x0 0xff>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+ð1 {
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <1>;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/ar9341_tplink_tl-mr3420-v2.dts b/target/linux/ath79/dts/ar9341_tplink_tl-mr3420-v2.dts
new file mode 100644
index 0000000..9adc9a1
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_tplink_tl-mr3420-v2.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9341_tplink.dtsi"
+
+/ {
+ model = "TP-Link TL-MR3420 v2";
+ compatible = "tplink,tl-mr3420-v2", "qca,ar9341";
+
+ keys {
+ compatible = "gpio-keys";
+
+ rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "Reset/WPS";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&leds {
+ usb {
+ label = "green:usb";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+};
+
+&gpio {
+ usb_power {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "tp-link:power:usb";
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x3d0000>;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/ar9341_tplink_tl-wa.dtsi b/target/linux/ath79/dts/ar9341_tplink_tl-wa.dtsi
new file mode 100644
index 0000000..499ef98
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_tplink_tl-wa.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9341.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = &wmac;
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x3d0000>;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-swap = <1>;
+ };
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/ar9341_tplink_tl-wa850re-v1.dts b/target/linux/ath79/dts/ar9341_tplink_tl-wa850re-v1.dts
new file mode 100644
index 0000000..12755ae
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_tplink_tl-wa850re-v1.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9341_tplink_tl-wa.dtsi"
+
+/ {
+ model = "TP-Link TL-WA850RE v1";
+ compatible = "tplink,tl-wa850re-v1", "qca,ar9341";
+
+ aliases {
+ led-boot = &led_re;
+ led-failsafe = &led_re;
+ led-running = &led_re;
+ led-upgrade = &led_re;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "blue:lan";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "blue:wlan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_re: re {
+ label = "blue:re";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ signal1 {
+ label = "blue:signal1";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ signal2 {
+ label = "blue:signal2";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ signal3 {
+ label = "blue:signal3";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ signal4 {
+ label = "blue:signal4";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ signal5 {
+ label = "blue:signal5";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar9341_tplink_tl-wa860re-v1.dts b/target/linux/ath79/dts/ar9341_tplink_tl-wa860re-v1.dts
new file mode 100644
index 0000000..9f540f8
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_tplink_tl-wa860re-v1.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9341_tplink_tl-wa.dtsi"
+
+/ {
+ model = "TP-Link TL-WA860RE v1";
+ compatible = "tplink,tl-wa860re-v1", "qca,ar9341";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_orange;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_orange;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ onoff {
+ label = "ONOFF";
+ linux,code = <BTN_1>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_power_orange: power_orange {
+ label = "orange:power";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan_green {
+ label = "green:wlan";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan_orange {
+ label = "orange:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar9341_tplink_tl-wa901nd-v3.dts b/target/linux/ath79/dts/ar9341_tplink_tl-wa901nd-v3.dts
new file mode 100644
index 0000000..4a4e51f
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_tplink_tl-wa901nd-v3.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9341_tplink_tl-wa.dtsi"
+
+/ {
+ model = "TP-Link TL-WA901ND v3";
+ compatible = "tplink,tl-wa901nd-v3", "qca,ar9341";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ qss {
+ label = "green:qss";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar9341_tplink_tl-wr841-v8.dts b/target/linux/ath79/dts/ar9341_tplink_tl-wr841-v8.dts
new file mode 100644
index 0000000..cd7532d
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_tplink_tl-wr841-v8.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9341_tplink.dtsi"
+
+/ {
+ model = "TP-Link TL-WR841N/ND v8";
+ compatible = "tplink,tl-wr841-v8", "qca,ar9341";
+
+ keys {
+ compatible = "gpio-keys";
+
+ rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x3d0000>;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar9341_tplink_tl-wr842n-v2.dts b/target/linux/ath79/dts/ar9341_tplink_tl-wr842n-v2.dts
new file mode 100644
index 0000000..8c27fe1
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_tplink_tl-wr842n-v2.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9341_tplink.dtsi"
+
+/ {
+ model = "TP-Link TL-WR842N/ND v2";
+ compatible = "tplink,tl-wr842n-v2", "qca,ar9341";
+
+ keys {
+ compatible = "gpio-keys";
+
+ rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_usb_power {
+ gpio-export,name = "tp-link:power:usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&leds {
+ usb {
+ label = "green:usb";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x7d0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+ð1 {
+ phy-handle = <&swphy4>;
+};
diff --git a/target/linux/ath79/dts/ar9342_iodata_etg3-r.dts b/target/linux/ath79/dts/ar9342_iodata_etg3-r.dts
new file mode 100644
index 0000000..8b354d6
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_iodata_etg3-r.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "iodata,etg3-r", "qca,ar9344";
+ model = "I-O DATA ETG3-R";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ notification {
+ label = "green:notification";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0x780000>;
+ };
+
+ partition@7d0000 {
+ label = "Config";
+ reg = <0x07d0000 0x10000>;
+ read-only;
+ };
+
+ partition@7e0000 {
+ label = "Rsv";
+ reg = <0x07e0000 0x10000>;
+ read-only;
+ };
+
+ partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+ 0x50 0xffb7ffb7 /* LED_CTRL0 */
+ 0x54 0xffb7ffb7 /* LED_CTRL1 */
+ 0x58 0xffb7ffb7 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x0e000000 0x00000101 0x00001616>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ rgmii-gmac0 = <1>;
+ rxd-delay = <3>;
+ rxdv-delay = <3>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9342_mikrotik_routerboard-912uag-2hpnd.dts b/target/linux/ath79/dts/ar9342_mikrotik_routerboard-912uag-2hpnd.dts
new file mode 100644
index 0000000..14286ae
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_mikrotik_routerboard-912uag-2hpnd.dts
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "mikrotik,routerboard-912uag-2hpnd", "qca,ar9342";
+ model = "MikroTik RouterBOARD 912UAG-2HPnD";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ gpio_latch: gpio_latch {
+ compatible = "gpio-latch";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>,
+ <&gpio 1 GPIO_ACTIVE_HIGH>,
+ <&gpio 2 GPIO_ACTIVE_HIGH>,
+ <&gpio 3 GPIO_ACTIVE_HIGH>,
+ <0>, /* Not connected */
+ <&gpio 13 GPIO_ACTIVE_HIGH>,
+ <&gpio 14 GPIO_ACTIVE_HIGH>,
+ <&gpio 15 GPIO_ACTIVE_HIGH>,
+ <&gpio 11 GPIO_ACTIVE_LOW>; /* Latch Enable */
+ };
+
+ nand_gpio {
+ compatible = "mikrotik,rb91x-nand";
+
+ gpios = <&gpio_latch 3 GPIO_ACTIVE_HIGH>, /* Read */
+ <&gpio 4 GPIO_ACTIVE_HIGH>, /* Ready (RDY) */
+ <&gpio_latch 5 GPIO_ACTIVE_LOW>, /* Chip Enable (nCE) */
+ <&gpio_latch 6 GPIO_ACTIVE_HIGH>, /* Command Latch Enable (CLE) */
+ <&gpio_latch 7 GPIO_ACTIVE_HIGH>, /* Address Latch Enable (ALE) */
+ <&gpio 12 GPIO_ACTIVE_LOW>, /* Read/Write Enable (nRW) */
+ <&gpio_latch 8 GPIO_ACTIVE_LOW>; /* Latch Enable (nLE) */
+
+ partitions {
+ compatible = "fixed-partitions";
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "booter";
+ reg = <0x0 0x0040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "kernel";
+ reg = <0x0040000 0x03c0000>;
+ };
+
+ partition@400000 {
+ label = "ubi";
+ reg = <0x0400000 0x7c00000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio_latch 1 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ user {
+ label = "green:user";
+ gpios = <&gpio_latch 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ led1 {
+ label = "green:led1";
+ gpios = <&ssr 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ led2 {
+ label = "green:led2";
+ gpios = <&ssr 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ led3 {
+ label = "green:led3";
+ gpios = <&ssr 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ led4 {
+ label = "green:led4";
+ gpios = <&ssr 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ led5 {
+ label = "green:led5";
+ gpios = <&ssr 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ beeper {
+ gpio-export,name = "beeper";
+ gpio-export,output = <1>; /* Must be 1 to avoid EMI induced clicking noise */
+ gpios = <&ssr 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb_power {
+ gpio-export,name = "power-usb";
+ gpio-export,output = <1>;
+ gpios = <&ssr 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ pcie_power {
+ gpio-export,name = "power-pcie";
+ gpio-export,output = <0>;
+ gpios = <&ssr 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&spi {
+ status = "okay";
+
+ compatible = "qca,ar7100-spi";
+
+ cs-gpios = <0>, <&gpio_latch 0 GPIO_ACTIVE_LOW>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "mikrotik,routerboot-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "routerboot";
+ reg = <0x0 0x0>;
+ read-only;
+ };
+
+ hard_config: hard_config {
+ read-only;
+ };
+
+ bios {
+ size = <0x1000>;
+ read-only;
+ };
+
+ soft_config {
+ };
+ };
+ };
+
+ ssr: ssr@1 {
+ compatible = "fairchild,74hc595";
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <1>;
+ reg = <1>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy0>;
+ pll-data = <0x02000000 0x00000101 0x00001313>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-gmac0 = <1>;
+ rgmii-enabled = <1>;
+ rxd-delay = <1>;
+ txd-delay = <1>;
+ };
+};
+
+&wmac {
+ status = "okay";
+ qca,no-eeprom;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/ar9342_ubnt_aircube-ac.dts b/target/linux/ath79/dts/ar9342_ubnt_aircube-ac.dts
new file mode 100644
index 0000000..01bc487
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_aircube-ac.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ubnt,aircube-ac", "qca,ar9342";
+ model = "Ubiquiti airCube AC";
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xf60000>;
+ };
+
+ partition@fb0000 {
+ label = "cfg";
+ reg = <0xfb0000 0x040000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <4>;
+ phy0: ethernet-phy@0 {
+ phy-mode = "rgmii";
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ /* default for ar934x, except for 1000M and 10M */
+ pll-data = <0x06000000 0x00000101 0x00001313>;
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9342_ubnt_bullet-ac.dts b/target/linux/ath79/dts/ar9342_ubnt_bullet-ac.dts
new file mode 100644
index 0000000..be0b079
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_bullet-ac.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9342_ubnt_wa_1port.dtsi"
+
+/ {
+ compatible = "ubnt,bullet-ac", "ubnt,wa", "qca,ar9342";
+ model = "Ubiquiti Bullet AC (2WA)";
+
+ aliases {
+ led-boot = &led_rssi3;
+ led-failsafe = &led_rssi3;
+ led-upgrade = &led_rssi3;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ rssi0 {
+ label = "blue:rssi0";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi1 {
+ label = "blue:rssi1";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi2 {
+ label = "blue:rssi2";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_rssi3: rssi3 {
+ label = "blue:rssi3";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts b/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts
new file mode 100644
index 0000000..0101820
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9342_ubnt_xw.dtsi"
+
+/ {
+ compatible = "ubnt,bullet-m-xw", "ubnt,xw", "qca,ar9342";
+ model = "Ubiquiti Bullet M (XW)";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <4>;
+ phy4: ethernet-phy@4 {
+ phy-mode = "rgmii";
+ reg = <4>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+
+ gmac-config {
+ device = <&gmac>;
+ rxd-delay = <3>;
+ rxdv-delay = <3>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9342_ubnt_lap-120.dts b/target/linux/ath79/dts/ar9342_ubnt_lap-120.dts
new file mode 100644
index 0000000..db639fc
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_lap-120.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9342_ubnt_wa_1port.dtsi"
+
+/ {
+ compatible = "ubnt,lap-120", "ubnt,wa", "qca,ar9342";
+ model = "Ubiquiti LiteAP ac (LAP-120)";
+};
+
+&wmac {
+ status = "disabled";
+};
diff --git a/target/linux/ath79/dts/ar9342_ubnt_litebeam-ac-gen2.dts b/target/linux/ath79/dts/ar9342_ubnt_litebeam-ac-gen2.dts
new file mode 100644
index 0000000..9086211
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_litebeam-ac-gen2.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9342_ubnt_wa_1port.dtsi"
+
+/ {
+ compatible = "ubnt,litebeam-ac-gen2", "ubnt,wa", "qca,ar9342";
+ model = "Ubiquiti LiteBeam AC Gen2";
+};
diff --git a/target/linux/ath79/dts/ar9342_ubnt_nanobeam-ac-gen2.dts b/target/linux/ath79/dts/ar9342_ubnt_nanobeam-ac-gen2.dts
new file mode 100644
index 0000000..08f3d2c
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_nanobeam-ac-gen2.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ar9342_ubnt_wa_2port.dtsi"
+
+/ {
+ compatible = "ubnt,nanobeam-ac-gen2", "ubnt,wa", "qca,ar9342";
+ model = "Ubiquiti NanoBeam AC Gen2 (WA)";
+
+ aliases {
+ led-boot = &led_rssi3;
+ led-failsafe = &led_rssi3;
+ led-upgrade = &led_rssi3;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ rssi0 {
+ label = "blue:rssi0";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi1 {
+ label = "blue:rssi1";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi2 {
+ label = "blue:rssi2";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_rssi3: rssi3 {
+ label = "blue:rssi3";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar9342_ubnt_nanobeam-ac.dts b/target/linux/ath79/dts/ar9342_ubnt_nanobeam-ac.dts
new file mode 100644
index 0000000..b32a200
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_nanobeam-ac.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9342_ubnt_wa_1port.dtsi"
+
+/ {
+ compatible = "ubnt,nanobeam-ac", "ubnt,wa", "qca,ar9342";
+ model = "Ubiquiti NanoBeam AC Gen1 (WA)";
+
+ aliases {
+ led-boot = &led_rssi3;
+ led-failsafe = &led_rssi3;
+ led-upgrade = &led_rssi3;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ rssi0 {
+ label = "blue:rssi0";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi1 {
+ label = "blue:rssi1";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi2 {
+ label = "blue:rssi2";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_rssi3: rssi3 {
+ label = "blue:rssi3";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar9342_ubnt_nanostation-ac-loco.dts b/target/linux/ath79/dts/ar9342_ubnt_nanostation-ac-loco.dts
new file mode 100644
index 0000000..72cd8b0
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_nanostation-ac-loco.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9342_ubnt_wa_1port.dtsi"
+
+/ {
+ compatible = "ubnt,nanostation-ac-loco", "ubnt,wa", "qca,ar9342";
+ model = "Ubiquiti Nanostation AC loco (WA)";
+};
diff --git a/target/linux/ath79/dts/ar9342_ubnt_nanostation-ac.dts b/target/linux/ath79/dts/ar9342_ubnt_nanostation-ac.dts
new file mode 100644
index 0000000..264498c
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_nanostation-ac.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9342_ubnt_wa_2port.dtsi"
+
+/ {
+ compatible = "ubnt,nanostation-ac","ubnt,wa", "qca,ar9342";
+ model = "Ubiquiti Nanostation AC (WA)";
+
+ aliases {
+ led-boot = &led_rssi3;
+ led-failsafe = &led_rssi3;
+ led-upgrade = &led_rssi3;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ rssi0 {
+ label = "blue:rssi0";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi1 {
+ label = "blue:rssi1";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi2 {
+ label = "blue:rssi2";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_rssi3: rssi3 {
+ label = "blue:rssi3";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar9342_ubnt_nanostation-loco-m-xw.dts b/target/linux/ath79/dts/ar9342_ubnt_nanostation-loco-m-xw.dts
new file mode 100644
index 0000000..5a7448e
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_nanostation-loco-m-xw.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9342_ubnt_xw.dtsi"
+
+/ {
+ compatible = "ubnt,nanostation-loco-m-xw", "ubnt,xw", "qca,ar9342";
+ model = "Ubiquiti Nanostation Loco M (XW)";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x1>;
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "mii";
+ reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy1>;
+};
diff --git a/target/linux/ath79/dts/ar9342_ubnt_nanostation-m-xw.dts b/target/linux/ath79/dts/ar9342_ubnt_nanostation-m-xw.dts
new file mode 100644
index 0000000..c8e153e
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_nanostation-m-xw.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9342_ubnt_xw.dtsi"
+
+/ {
+ compatible = "ubnt,nanostation-m-xw", "ubnt,xw", "qca,ar9342";
+ model = "Ubiquiti Nanostation M (XW)";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4-mii-enable;
+ phy-mask = <0x23>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "mii";
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ mii-gmac0 = <1>;
+ mii-gmac0-slave = <1>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts
new file mode 100644
index 0000000..446c990
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9342_ubnt_wa_1port.dtsi"
+
+/ {
+ compatible = "ubnt,powerbeam-5ac-gen2", "ubnt,wa", "qca,ar9342";
+ model = "Ubiquiti PowerBeam 5AC Gen2";
+
+ aliases {
+ led-boot = &led_rssi3;
+ led-failsafe = &led_rssi3;
+ led-upgrade = &led_rssi3;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ rssi0 {
+ label = "blue:rssi0";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi1 {
+ label = "blue:rssi1";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi2 {
+ label = "blue:rssi2";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_rssi3: rssi3 {
+ label = "blue:rssi3";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar9342_ubnt_wa.dtsi b/target/linux/ath79/dts/ar9342_ubnt_wa.dtsi
new file mode 100644
index 0000000..ac036cc
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_wa.dtsi
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ubnt,wa", "qca,ar9342";
+ model = "Ubiquiti Networks WA board";
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xf60000>;
+ };
+
+ partition@fb0000 {
+ label = "cfg";
+ reg = <0xfb0000 0x040000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ qca,disable-5ghz;
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9342_ubnt_wa_1port.dtsi b/target/linux/ath79/dts/ar9342_ubnt_wa_1port.dtsi
new file mode 100644
index 0000000..918b69c
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_wa_1port.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9342_ubnt_wa.dtsi"
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <4>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ /* default for ar934x, except for 1000M and 10M */
+ pll-data = <0x02000000 0x00000101 0x00001313>;
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy4>;
+
+ gmac-config {
+ device = <&gmac>;
+ rxd-delay = <3>;
+ rxdv-delay = <3>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9342_ubnt_wa_2port.dtsi b/target/linux/ath79/dts/ar9342_ubnt_wa_2port.dtsi
new file mode 100644
index 0000000..f2e936b
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_wa_2port.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9342_ubnt_wa.dtsi"
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <4>;
+
+ phy0: ethernet-phy@0 {
+ phy-mode = "rgmii";
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+ 0x58 0xffb7ffb7 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ /* default for ar934x, except for 1000M and 10M */
+ pll-data = <0x06000000 0x00000101 0x00001313>;
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ rxd-delay = <2>;
+ rxdv-delay = <2>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9342_ubnt_xw.dtsi b/target/linux/ath79/dts/ar9342_ubnt_xw.dtsi
new file mode 100644
index 0000000..3089e6b
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_xw.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ubnt,xw", "qca,ar9342";
+ model = "Ubiquiti Networks XW board";
+
+ aliases {
+ led-boot = &led_link4;
+ led-running = &led_link4;
+ led-upgrade = &led_link4;
+ led-failsafe = &led_link4;
+ label-mac-device = &wmac;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ link1 {
+ label = "red:link1";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ link2 {
+ label = "orange:link2";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ link3 {
+ label = "green:link3";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_link4: link4 {
+ label = "green:link4";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0x760000>;
+ };
+
+ partition@7b0000 {
+ label = "cfg";
+ reg = <0x7b0000 0x040000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
+
+ð0 {
+ mtd-mac-address = <&art 0x0>;
+};
diff --git a/target/linux/ath79/dts/ar9344.dtsi b/target/linux/ath79/dts/ar9344.dtsi
new file mode 100644
index 0000000..e99d962
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar934x.dtsi"
+
+/ {
+ compatible = "qca,ar9344";
+};
+
+&cpuintc {
+ qca,ddr-wb-channel-interrupts = <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 2>, <&ddr_ctrl 0>,
+ <&ddr_ctrl 1>;
+};
+
+&rst {
+ intc2: interrupt-controller {
+ compatible = "qca,ar9340-intc";
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ qca,int-status-addr = <0xac>;
+ qca,pending-bits = <0xf>, /* wmac */
+ <0x1f0>; /* pcie rc1 */
+
+ qca,ddr-wb-channel-interrupts = <0>, <1>;
+ qca,ddr-wb-channels = <&ddr_ctrl 4>, <&ddr_ctrl 3>;
+ };
+};
+
+&ahb {
+ pcie: pcie-controller@180c0000 {
+ compatible = "qcom,ar9340-pci", "qcom,ar7240-pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0x0>;
+ reg = <0x180c0000 0x1000>, /* CRP */
+ <0x180f0000 0x100>, /* CTRL */
+ <0x14000000 0x1000>; /* CFG */
+ reg-names = "crp_base", "ctrl_base", "cfg_base";
+ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
+ 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
+ interrupt-parent = <&intc2>;
+ interrupts = <1>;
+
+ resets = <&rst 6>, <&rst 7>;
+ reset-names = "hc", "phy";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-map-mask = <0 0 0 1>;
+ interrupt-map = <0 0 0 0 &pcie 0>;
+
+ status = "disabled";
+ };
+};
+
+&wmac {
+ interrupt-parent = <&intc2>;
+ interrupts = <0>;
+};
diff --git a/target/linux/ath79/dts/ar9344_aerohive_hiveap-121.dts b/target/linux/ath79/dts/ar9344_aerohive_hiveap-121.dts
new file mode 100644
index 0000000..fae3eec
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_aerohive_hiveap-121.dts
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "aerohive,hiveap-121", "qca,ar9344";
+ model = "Aerohive HiveAP 121";
+
+ aliases {
+ led-boot = &led_power_white;
+ led-failsafe = &led_power_orange;
+ led-running = &led_power_white;
+ led-upgrade = &led_power_orange;
+ label-mac-device = ð0;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,9600";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_orange: power_orange {
+ label = "orange:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_white: power_white {
+ label = "white:power";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH /* sda */
+ &gpio 12 GPIO_ACTIVE_HIGH /* scl */
+ >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tpm@29 {
+ compatible = "atmel,at97sc3204t";
+ reg = <0x29>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ gpio_ext_lna0 {
+ gpio-hog;
+ gpios = <20 0>;
+ output-low;
+ line-name = "hiveap-121:ext:lna0";
+ };
+
+ gpio_ext_lna1 {
+ gpio-hog;
+ gpios = <19 0>;
+ output-low;
+ line-name = "hiveap-121:ext:lna1";
+ };
+
+ gpio_usb_power {
+ gpio-hog;
+ gpios = <15 0>;
+ output-high;
+ line-name = "hiveap-121:power:usb";
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "pci168c,0030";
+ reg = <0x0000 0 0 0 0>;
+
+ mtd-mac-address = <&hw_info 0x0>;
+ mtd-mac-address-increment = <2>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "u-boot-env";
+ reg = <0x80000 0x10000>;
+ read-only;
+ };
+
+ hw_info: partition@90000 {
+ label = "hw-info";
+ reg = <0x90000 0x10000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "boot-info";
+ reg = <0xa0000 0x10000>;
+ read-only;
+ };
+
+ partition@b0000 {
+ label = "boot-sinfo";
+ reg = <0xb0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-mac-address = <&hw_info 0x0>;
+ mtd-mac-address-increment = <1>;
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot1";
+ reg = <0x0 0x400000>;
+ read-only;
+ };
+
+ partition@400000 {
+ label = "u-boot-env1";
+ reg = <0x400000 0x400000>;
+ read-only;
+ };
+
+ partition@800000 {
+ label = "kernel";
+ reg = <0x800000 0x500000>;
+ };
+
+ partition@d00000 {
+ label = "ubi";
+ reg = <0xd00000 0x6f00000>;
+ };
+
+ partition@2e00000 {
+ label = "wifi-info";
+ reg = <0x7c00000 0x400000>;
+ read-only;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x06000000 0x00000101 0x00001313>;
+
+ mtd-mac-address = <&hw_info 0x0>;
+
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-gmac0 = <1>;
+ rxd-delay = <1>;
+ rxdv-delay = <1>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_alfa-network_n5q.dts b/target/linux/ath79/dts/ar9344_alfa-network_n5q.dts
new file mode 100644
index 0000000..486e109
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_alfa-network_n5q.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "ALFA Network N5Q";
+ compatible = "alfa-network,n5q", "qca,ar9344";
+
+ aliases {
+ label-mac-device = &wmac;
+ led-boot = &led_signal4;
+ led-failsafe = &led_signal4;
+ led-upgrade = &led_signal4;
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ watchdog-enable {
+ gpio-export,name = "watchdog-enable";
+ gpio-export,output = <1>;
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "green:lan2";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+
+ led_signal4: signal4 {
+ label = "green:signal4";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ signal1 {
+ label = "red:signal1";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ signal2 {
+ label = "orange:signal2";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ signal3 {
+ label = "green:signal3";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ hw_algo = "toggle";
+ hw_margin_ms = <25000>;
+ always-running;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+ phy-handle = <&swphy4>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x6>;
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x060000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "u-boot-env";
+ reg = <0x060000 0x010000>;
+ };
+
+ art: partition@70000 {
+ label = "art";
+ reg = <0x070000 0x010000>;
+ read-only;
+ };
+
+ partition@80000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x080000 0xf80000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9344_comfast_cf-e120a-v3.dts b/target/linux/ath79/dts/ar9344_comfast_cf-e120a-v3.dts
new file mode 100644
index 0000000..73e0637
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_comfast_cf-e120a-v3.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "comfast,cf-e120a-v3", "qca,ar9344";
+ model = "COMFAST CF-E120A v3";
+
+ aliases {
+ led-boot = &led_rssihigh;
+ led-failsafe = &led_rssihigh;
+ led-upgrade = &led_rssihigh;
+ label-mac-device = ð0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_rssimediumhigh_pin>;
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ rssilow {
+ label = "red:rssilow";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimediumlow {
+ label = "red:rssimediumlow";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimediumhigh {
+ label = "green:rssimediumhigh";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ led_rssihigh: rssihigh {
+ label = "green:rssihigh";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&pinmux {
+ led_rssimediumhigh_pin: pinmux_rssimediumhigh_pin {
+ pinctrl-single,bits = <0x10 0x0 0xff>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ art: partition@10000 {
+ label = "art";
+ reg = <0x010000 0x010000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x020000 0x7d0000>;
+ };
+
+ partition@7f0000 {
+ label = "nvram";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+ phy-handle = <&swphy0>;
+ mtd-mac-address = <&art 0x0>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+ mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9344_compex_wpj344-16m.dts b/target/linux/ath79/dts/ar9344_compex_wpj344-16m.dts
new file mode 100644
index 0000000..96549ec
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_compex_wpj344-16m.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "compex,wpj344-16m", "qca,ar9344";
+ model = "Compex WPJ344 (16MB flash)";
+
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "green:status";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ sig1 {
+ label = "red:sig1";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ sig2 {
+ label = "yellow:sig2";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ sig3 {
+ label = "green:sig3";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+
+ sig4 {
+ label = "green:sig4";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x030000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "firmware";
+ reg = <0x030000 0xfc0000>;
+ compatible = "denx,uimage";
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+ 0x10 0x80000080 /* POWER_ON_STRAP */
+ 0x50 0x00000000 /* LED_CTRL0 */
+ 0x54 0xc737c737 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x00c30c00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x06000000 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&uboot 0x2e010>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
diff --git a/target/linux/ath79/dts/ar9344_devolo_magic-2-wifi.dts b/target/linux/ath79/dts/ar9344_devolo_magic-2-wifi.dts
new file mode 100644
index 0000000..627265b
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_devolo_magic-2-wifi.dts
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Devolo Magic 2 Wifi";
+ compatible = "devolo,magic-2-wifi", "qca,ar9344";
+
+ aliases {
+ led-boot = &led_dlan_red;
+ led-failsafe = &led_dlan_red;
+ led-running = &led_dlan_white;
+ led-upgrade = &led_dlan_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "white:wlan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ led_dlan_white: dlan_white {
+ label = "white:dlan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_dlan_red: dlan_red {
+ label = "red:dlan";
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wifi {
+ label = "WIFI button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ dlan {
+ label = "DLAN button";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&gpio {
+ wlan_power {
+ gpio-hog;
+ line-name = "WLAN power";
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "Config1";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "Config2";
+ reg = <0x60000 0x10000>;
+ read-only;
+ };
+
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x70000 0xf80000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x02000000 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&art 0x1002>;
+ mtd-mac-address-increment = <2>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
+
+&pcie {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+
+ qca,ar8327-initvals = <
+ /* PORT0: RGMII, MAC0/6 exchage, tx_delay 01, No rx_delay */
+ 0x04 0x06400000
+ 0x08 0x00000000 /* PORT5 PAD MODE CTRL */
+ 0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_dlink_dir-825-c1.dts b/target/linux/ath79/dts/ar9344_dlink_dir-825-c1.dts
new file mode 100644
index 0000000..e6f18ce
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_dlink_dir-825-c1.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_dlink_dir-8x5.dtsi"
+
+/ {
+ model = "D-LINK DIR-825 C1";
+ compatible = "dlink,dir-825-c1", "qca,ar9344";
+
+ aliases {
+ led-boot = &led_power_orange;
+ led-failsafe = &led_power_orange;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_orange;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio_11>;
+
+ led_power_blue: power_blue {
+ label = "blue:power";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "blue:usb";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port1>;
+ };
+
+ wan_blue {
+ label = "blue:wan";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "blue:wlan2g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wps {
+ label = "blue:wps";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_orange: power_orange {
+ label = "orange:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_orange {
+ label = "orange:wan";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds-ath9k {
+ compatible = "gpio-leds";
+
+ wlan5g {
+ label = "blue:wlan5g";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+};
+
+&pinmux {
+ enable_gpio_11: pinmux_enable_gpio_11 {
+ pinctrl-single,bits = <0x8 0x0 0xff000000>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_dlink_dir-835-a1.dts b/target/linux/ath79/dts/ar9344_dlink_dir-835-a1.dts
new file mode 100644
index 0000000..b2fcf71
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_dlink_dir-835-a1.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_dlink_dir-8x5.dtsi"
+
+/ {
+ model = "D-LINK DIR-835 A1";
+ compatible = "dlink,dir-835-a1", "qca,ar9344";
+
+ aliases {
+ led-boot = &led_power_orange;
+ led-failsafe = &led_power_orange;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_orange;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_green {
+ label = "green:wan";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "green:wps";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_orange: power_orange {
+ label = "orange:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_orange {
+ label = "orange:wan";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_dlink_dir-8x5.dtsi b/target/linux/ath79/dts/ar9344_dlink_dir-8x5.dtsi
new file mode 100644
index 0000000..e591ecd
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_dlink_dir-8x5.dtsi
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ /* default for ar934x, except for 1000M */
+ pll-data = <0x06000000 0x00000101 0x00001616>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ /* GPL code drop (bsp.h & athrs17_phy.c) */
+ 0x10 0xc1000000 /* PWS_REG_VALUE */
+ 0x04 0x07600000 /* PORT0 PAD Mode */
+ 0x0c 0x01000000 /* PORT6 PAD Mode */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6_STATUS */
+ >;
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,0030";
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "nvram";
+ reg = <0x010000 0x010000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0xF90000>;
+ compatible = "denx,uimage";
+ };
+
+ partition@fb0000 {
+ label = "lang";
+ reg = <0xfb0000 0x030000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "mac";
+ reg = <0xfe0000 0x010000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+ qca,no-eeprom;
+};
diff --git a/target/linux/ath79/dts/ar9344_engenius_eap600.dts b/target/linux/ath79/dts/ar9344_engenius_eap600.dts
new file mode 100644
index 0000000..c6961f6
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_engenius_eap600.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_engenius_exx600.dtsi"
+
+/ {
+ model = "EnGenius EAP600";
+ compatible = "engenius,eap600", "qca,ar9344";
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "amber:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wps {
+ label = "blue:wps";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi5g {
+ label = "green:wifi5g";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+ð0 {
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <(-2)>;
+};
+
+&pcie {
+ wifi@0,0,0 {
+ mtd-mac-address = <&art 0x0>;
+ };
+};
+
+&wmac {
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <(-1)>;
+};
diff --git a/target/linux/ath79/dts/ar9344_engenius_ecb600.dts b/target/linux/ath79/dts/ar9344_engenius_ecb600.dts
new file mode 100644
index 0000000..13167ad
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_engenius_ecb600.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_engenius_exx600.dtsi"
+
+/ {
+ model = "EnGenius ECB600";
+ compatible = "engenius,ecb600", "qca,ar9344";
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "amber:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wifi5g {
+ label = "blue:wifi5g";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+ð0 {
+ mtd-mac-address = <&art 0x0>;
+};
+
+&pcie {
+ wifi@0,0,0 {
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <(-2)>;
+ };
+};
+
+&wmac {
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <(-1)>;
+};
diff --git a/target/linux/ath79/dts/ar9344_engenius_exx600.dtsi b/target/linux/ath79/dts/ar9344_engenius_exx600.dtsi
new file mode 100644
index 0000000..1c318f2
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_engenius_exx600.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+#include "ar934x_senao_loader.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wifi2g {
+ label = "blue:wifi2g";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ eee-broken-100tx;
+ eee-broken-1000t;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+
+ pll-data = <0x02000000 0x00000101 0x00001313>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-gmac0 = <1>;
+ rxdv-delay = <3>;
+ rxd-delay = <3>;
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0,0 {
+ compatible = "pci168c,0030";
+ reg = <0x0 0 0 0 0>;
+ qca,disable-5ghz;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ qca,disable-2ghz;
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9344_enterasys_ws-ap3705i.dts b/target/linux/ath79/dts/ar9344_enterasys_ws-ap3705i.dts
new file mode 100644
index 0000000..52becec
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_enterasys_ws-ap3705i.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "enterasys,ws-ap3705i", "qca,ar9344";
+ model = "Enterasys WS-AP3705i";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_red;
+ label-mac-device = ð0;
+ };
+
+ mtd-concat {
+ compatible = "mtd-concat";
+ devices = <&fwconcat0 &fwconcat1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x0 0x1dd0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio_11 &enable_gpio_16>;
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ lan_blue {
+ label = "blue:lan";
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan_green {
+ label = "green:lan";
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ radio2 {
+ label = "green:radio2";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ radio1 {
+ label = "green:radio1";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&pinmux {
+ enable_gpio_16: pinmux_enable_gpio_16 {
+ pinctrl-single,bits = <0x10 0x0 0x000000ff>;
+ };
+
+ enable_gpio_11: pinmux_enable_gpio_11 {
+ pinctrl-single,bits = <0x8 0x0 0xff000000>;
+ };
+};
+
+&wmac {
+ status = "okay";
+ qca,no-eeprom;
+};
+
+&spi {
+ status = "okay";
+
+ cs-gpios = <0>, <0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot-bak";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "u-boot-env0";
+ reg = <0x80000 0x10000>;
+ read-only;
+ };
+
+ partition@90000 {
+ label = "u-boot-env1";
+ reg = <0x90000 0x10000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "u-boot";
+ reg = <0xa0000 0x80000>;
+ read-only;
+ };
+
+ partition@120000 {
+ label = "calibrate";
+ reg = <0x120000 0x10000>;
+ read-only;
+ };
+
+ partition@130000 {
+ label = "nvram";
+ reg = <0x130000 0x100000>;
+ read-only;
+ };
+
+ fwconcat0: partition@230000 {
+ label = "fwconcat0";
+ reg = <0x230000 0xdd0000>;
+ };
+ };
+ };
+
+ flash@1 {
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ fwconcat1: partition@0 {
+ label = "fwconcat1";
+ reg = <0x0 0x1000000>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,0033";
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x1e000000 0x08000101 0x08001313>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-gmac0 = <1>;
+ rxd-delay = <0>;
+ rxdv-delay = <0>;
+ txen-delay = <0>;
+ txd-delay = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_mercury_mw4530r-v1.dts b/target/linux/ath79/dts/ar9344_mercury_mw4530r-v1.dts
new file mode 100644
index 0000000..7fa4b7c
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_mercury_mw4530r-v1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_tl-wdr4300.dtsi"
+
+/ {
+ model = "Mercury MW4530R v1";
+ compatible = "mercury,mw4530r-v1", "qca,ar9344";
+};
diff --git a/target/linux/ath79/dts/ar9344_mikrotik_routerboard-sxt-5n.dtsi b/target/linux/ath79/dts/ar9344_mikrotik_routerboard-sxt-5n.dtsi
new file mode 100644
index 0000000..3ed50ab
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_mikrotik_routerboard-sxt-5n.dtsi
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "mikrotik,routerboard-sxt-5n", "qca,ar9344";
+ model = "MikroTik SXT 5N platform";
+
+ aliases {
+ led-boot = &led_user;
+ led-failsafe = &led_user;
+ led-running = &led_user;
+ led-upgrade = &led_user;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "green:power";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ rssilow {
+ label = "green:rssilow";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimediumlow {
+ label = "green:rssimediumlow";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimedium {
+ label = "green:rssimedium";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimediumhigh {
+ label = "green:rssimediumhigh";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+
+ rssihigh {
+ label = "green:rssihigh";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+
+ led_user: user {
+ label = "green:user";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_nand_power {
+ gpio-export,name = "sxt5n:power:nand";
+ gpio-export,output = <0>;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "RouterBoot";
+ reg = <0x0 0x20000>;
+ read-only;
+ compatible = "mikrotik,routerboot-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader1";
+ reg = <0x0 0x0>;
+ read-only;
+ };
+
+ hard_config: hard_config {
+ read-only;
+ };
+
+ bios {
+ size = <0x1000>;
+ read-only;
+ };
+
+ soft_config {
+ };
+
+ partition@10000 {
+ label = "bootloader2";
+ reg = <0x10000 0x10000>;
+ read-only;
+ };
+ };
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ nand-ecc-mode = "soft";
+ qca,nand-swap-dma;
+ qca,nand-scan-fixup;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "booter";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "kernel";
+ reg = <0x0040000 0x03c0000>;
+ };
+
+ partition@400000 {
+ label = "ubi";
+ reg = <0x0400000 0x7c00000>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ compatible = "syscon", "simple-mfd";
+};
+
+&wmac {
+ status = "okay";
+
+ qca,no-eeprom;
+};
diff --git a/target/linux/ath79/dts/ar9344_mikrotik_routerboard-sxt-5nd-r2.dts b/target/linux/ath79/dts/ar9344_mikrotik_routerboard-sxt-5nd-r2.dts
new file mode 100644
index 0000000..3d0b941
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_mikrotik_routerboard-sxt-5nd-r2.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_mikrotik_routerboard-sxt-5n.dtsi"
+
+/ {
+ compatible = "mikrotik,routerboard-sxt-5nd-r2", "qca,ar9344";
+ model = "MikroTik RouterBOARD SXT 5nD r2 (SXT Lite5)";
+};
diff --git a/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi b/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi
new file mode 100644
index 0000000..52425a0
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_power_amber;
+ led-failsafe = &led_power_amber;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_amber;
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio_11>;
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_amber: power_amber {
+ label = "amber:power";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wlan2g_green {
+ label = "green:wlan2g";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g_blue {
+ label = "blue:wlan5g";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wps_green {
+ label = "green:wps";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wps_amber {
+ label = "amber:wps";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ubi-concat {
+ compatible = "mtd-concat";
+ devices = <&ubiconcat0 &ubiconcat1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ubi@ac0000 {
+ label = "ubi";
+ reg = <0x0 0x7500000>;
+ };
+ };
+ };
+};
+
+&pinmux {
+ enable_gpio_11: pinmux_enable_gpio_11 {
+ pinctrl-single,bits = <0x8 0x0 0xff000000>;
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x40000>;
+ };
+
+ caldata: partition@80000 {
+ label = "caldata";
+ reg = <0x80000 0x40000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "pot";
+ reg = <0xc0000 0x80000>;
+ };
+
+ partition@140000 {
+ label = "language";
+ reg = <0x140000 0x200000>;
+ };
+
+ partition@340000 {
+ label = "config";
+ reg = <0x340000 0x80000>;
+ };
+
+ partition@3c0000 {
+ label = "traffic_meter";
+ reg = <0x3c0000 0x300000>;
+ };
+
+ kernel@6c0000 {
+ label = "kernel";
+ reg = <0x6c0000 0x400000>;
+ };
+
+ ubiconcat0: partition@ac0000 {
+ label = "ubiconcat0";
+ reg = <0xac0000 0x1500000>;
+ };
+
+ partition@6c0000 {
+ label = "firmware";
+ reg = <0x6c0000 0x1900000>;
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <0x33373033>;
+ openwrt,ih-type = <IH_TYPE_FILESYSTEM>;
+ };
+
+ partition@1fc0000 {
+ label = "caldata_backup";
+ reg = <0x1fc0000 0x40000>;
+ read-only;
+ };
+
+ ubiconcat1: partition@2000000 {
+ label = "ubiconcat1";
+ reg = <0x2000000 0x6000000>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&builtin_switch {
+ resets = <&rst 8>, <&rst 12>;
+ reset-names = "switch", "switch-analog";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ qca,mib-poll-interval = <500>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000
+ 0x0c 0x01000000
+ 0x10 0xc1000000
+ 0x50 0xcc35cc35
+ 0x54 0xcb37cb37
+ 0x58 0x00000000
+ 0x5c 0x00f3cf00
+ 0x7c 0x0000007e
+ 0x94 0x0000007e
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ /* default for ar934x, except for 1000M */
+ pll-data = <0x06000000 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&caldata 0x0>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
+
+&gpio {
+ lna0 {
+ gpio-hog;
+ line-name = "netgear:ext:lna0";
+ gpios = <18 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+
+ lna1 {
+ gpio-hog;
+ line-name = "netgear:ext:lna1";
+ gpios = <19 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-mac-address = <&caldata 0x0>;
+ qca,no-eeprom;
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,0033";
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&caldata 0xc>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_netgear_wndr3700-v4.dts b/target/linux/ath79/dts/ar9344_netgear_wndr3700-v4.dts
new file mode 100644
index 0000000..9b5d364
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_netgear_wndr3700-v4.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_netgear_wndr.dtsi"
+#include "ar9344_netgear_wndr_wan.dtsi"
+#include "ar9344_netgear_wndr_usb.dtsi"
+
+/ {
+ compatible = "netgear,wndr3700-v4", "qca,ar9344";
+ model = "Netgear WNDR3700 v4";
+};
diff --git a/target/linux/ath79/dts/ar9344_netgear_wndr4300.dts b/target/linux/ath79/dts/ar9344_netgear_wndr4300.dts
new file mode 100644
index 0000000..b9b8b78
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_netgear_wndr4300.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_netgear_wndr.dtsi"
+#include "ar9344_netgear_wndr_wan.dtsi"
+#include "ar9344_netgear_wndr_usb.dtsi"
+
+/ {
+ compatible = "netgear,wndr4300", "qca,ar9344";
+ model = "Netgear WNDR4300";
+};
diff --git a/target/linux/ath79/dts/ar9344_netgear_wndr4300sw.dts b/target/linux/ath79/dts/ar9344_netgear_wndr4300sw.dts
new file mode 100644
index 0000000..178215e
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_netgear_wndr4300sw.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_netgear_wndr.dtsi"
+#include "ar9344_netgear_wndr_wan.dtsi"
+#include "ar9344_netgear_wndr_usb.dtsi"
+
+/ {
+ compatible = "netgear,wndr4300sw", "qca,ar9344";
+ model = "Netgear WNDR4300SW";
+};
diff --git a/target/linux/ath79/dts/ar9344_netgear_wndr4300tn.dts b/target/linux/ath79/dts/ar9344_netgear_wndr4300tn.dts
new file mode 100644
index 0000000..4961119
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_netgear_wndr4300tn.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_netgear_wndr.dtsi"
+
+/ {
+ compatible = "netgear,wndr4300tn", "qca,ar9344";
+ model = "Netgear WNDR4300TN";
+};
diff --git a/target/linux/ath79/dts/ar9344_netgear_wndr_usb.dtsi b/target/linux/ath79/dts/ar9344_netgear_wndr_usb.dtsi
new file mode 100644
index 0000000..0ca3b76
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_netgear_wndr_usb.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+&leds {
+ usb_green {
+ label = "green:usb";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+};
+
+&ath9k {
+ usb_power {
+ gpio-hog;
+ line-name = "netgear:power:usb";
+ gpios = <0 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_netgear_wndr_wan.dtsi b/target/linux/ath79/dts/ar9344_netgear_wndr_wan.dtsi
new file mode 100644
index 0000000..da60207
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_netgear_wndr_wan.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+&leds {
+ wan_green {
+ label = "green:wan";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts b/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
new file mode 100644
index 0000000..64805ee
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "OCEDO Raccoon";
+ compatible = "ocedo,raccoon", "qca,ar9344";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "green:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "yellow:wlan24";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_system: system {
+ label = "blue:sys";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan5g {
+ label = "red:wlan5";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0x740000>;
+ };
+
+ partition@790000 {
+ label = "vendor";
+ reg = <0x790000 0x740000>;
+ read-only;
+ };
+
+ partition@ed0000 {
+ label = "data";
+ reg = <0xed0000 0x110000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "id";
+ reg = <0xfe0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,0030";
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&art 0xc>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x6>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ eee-broken-100tx;
+ eee-broken-1000t;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x02000000 0x00000101 0x00001313>;
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-gmac0 = <1>;
+ rxdv-delay = <3>;
+ rxd-delay = <3>;
+ txen-delay = <0>;
+ txd-delay = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_openmesh_mr600-v1.dts b/target/linux/ath79/dts/ar9344_openmesh_mr600-v1.dts
new file mode 100644
index 0000000..6c20f27
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_openmesh_mr600-v1.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_openmesh_mr600.dtsi"
+
+/ {
+ compatible = "openmesh,mr600-v1", "qca,ar9344";
+ model = "OpenMesh MR600 v1";
+
+ aliases {
+ led-boot = &led_power_orange;
+ led-failsafe = &led_power_orange;
+ led-running = &led_power_orange;
+ led-upgrade = &led_power_orange;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi5g_green {
+ label = "green:wifi5g";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wps_blue {
+ label = "blue:wps";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_orange: power_orange {
+ label = "orange:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ leds-ath9k {
+ compatible = "gpio-leds";
+
+ wifi2g {
+ label = "blue:wifi2g";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_openmesh_mr600-v2.dts b/target/linux/ath79/dts/ar9344_openmesh_mr600-v2.dts
new file mode 100644
index 0000000..9880667
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_openmesh_mr600-v2.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_openmesh_mr600.dtsi"
+
+/ {
+ compatible = "openmesh,mr600-v2", "qca,ar9344";
+ model = "OpenMesh MR600 v2";
+
+ aliases {
+ led-boot = &led_power_blue;
+ led-failsafe = &led_power_blue;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_blue;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi5g_red {
+ label = "red:wifi5g";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wps_blue {
+ label = "blue:wps";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_blue: power_blue {
+ label = "blue:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wifi2g_green {
+ label = "green:wifi2g";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wifi2g_yellow {
+ label = "yellow:wifi2g";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi2g_red {
+ label = "red:wifi2g";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi5g_green {
+ label = "green:wifi5g";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi5g_yellow {
+ label = "yellow:wifi5g";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ /* hw_margin_ms is actually 300s but driver limits it to 60s */
+ hw_margin_ms = <60000>;
+ always-running;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_openmesh_mr600.dtsi b/target/linux/ath79/dts/ar9344_openmesh_mr600.dtsi
new file mode 100644
index 0000000..ff53273
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_openmesh_mr600.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ /delete-property/ bootargs;
+ };
+
+ aliases {
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ /* partitions are passed via bootloader */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ label = "custom";
+ reg = <0x050000 0x060000>;
+ read-only;
+ };
+
+ partition@b0000 {
+ label = "inactive";
+ reg = <0x0b0000 0x7a0000>;
+ };
+
+ partition@850000 {
+ label = "inactive2";
+ reg = <0x850000 0x7a0000>;
+ };
+
+ art: partition@ff0000 {
+ label = "ART";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x1>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ eee-broken-100tx;
+ eee-broken-1000t;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x02000000 0x00000101 0x00001313>;
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-gmac0 = <1>;
+ rxdv-delay = <3>;
+ rxd-delay = <3>;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,0030";
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <8>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_openmesh_om5p.dts b/target/linux/ath79/dts/ar9344_openmesh_om5p.dts
new file mode 100644
index 0000000..636595c
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_openmesh_om5p.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "openmesh,om5p", "qca,ar9344";
+ model = "OpenMesh OM5P";
+
+ chosen {
+ /delete-property/ bootargs;
+ };
+
+ aliases {
+ led-boot = &led_power_blue;
+ led-failsafe = &led_power_blue;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_blue;
+ label-mac-device = ð1;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_lan_wan_blue_pin>;
+
+ led_power_blue: power_blue {
+ label = "blue:power";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wan_blue {
+ label = "blue:wan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan_blue {
+ label = "blue:lan";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi_green {
+ label = "green:wifi";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi_yellow {
+ label = "yellow:wifi";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi_red {
+ label = "red:wifi";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ /* hw_margin_ms is actually 300s but driver limits it to 60s */
+ hw_margin_ms = <60000>;
+ always-running;
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&pinmux {
+ led_lan_wan_blue_pin: pinmux_lan_wan_blue_pin {
+ pinctrl-single,bits = <0xc 0x0 0xffff0000>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ /* partitions are passed via bootloader */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ label = "custom";
+ reg = <0x050000 0x060000>;
+ read-only;
+ };
+
+ partition@b0000 {
+ label = "inactive";
+ reg = <0x0b0000 0x7a0000>;
+ };
+
+ partition@850000 {
+ label = "inactive2";
+ reg = <0x850000 0x7a0000>;
+ };
+
+ art: partition@ff0000 {
+ label = "ART";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x6>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9344_pcs_cap324.dts b/target/linux/ath79/dts/ar9344_pcs_cap324.dts
new file mode 100644
index 0000000..3ce8bb5
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_pcs_cap324.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "PowerCloud Systems CAP324";
+ compatible = "pcs,cap324", "qca,ar9344";
+
+ aliases {
+ led-boot = &led_power_amber;
+ led-failsafe = &led_power_amber;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_amber;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_amber: power_amber {
+ label = "amber:power";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan_amber {
+ label = "amber:wlan";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan_green {
+ label = "green:wlan";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan_amber {
+ label = "amber:lan";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan_green {
+ label = "green:lan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0x0fa0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "168c,0030";
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <(-2)>;
+ mtd-cal-data = <&art 0x5000>;
+ qca,no-eeprom;
+ qca,disable-5ghz;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ qca,disable-2ghz;
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ /* default for ar934x, except for 1000M */
+ pll-data = <0x06000000 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
diff --git a/target/linux/ath79/dts/ar9344_pcs_cr5000.dts b/target/linux/ath79/dts/ar9344_pcs_cr5000.dts
new file mode 100644
index 0000000..9aaabd0
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_pcs_cr5000.dts
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "PowerCloud Systems CR5000";
+ compatible = "pcs,cr5000", "qca,ar9344";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "amber:power";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>,
+ <&gpio 4 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "blue:wlan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wps_white {
+ label = "white:wps";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0x07a0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,0030";
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&art 0x5002>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRAP */
+ 0x50 0xcc35cc35 /* LED_CTRL0 */
+ 0x54 0xca35ca35 /* LED_CTRL1 */
+ 0x58 0xc935c935 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ /* default for ar934x, except for 1000M */
+ pll-data = <0x06000000 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ aliases {
+ ag0 = ð1;
+ };
+
+ port@0 {
+ compatible = "swconfig,port";
+ reg = <0>;
+ swconfig,segment = "lan";
+ swconfig,portmap = <1 1>;
+ };
+
+ port@1 {
+ compatible = "swconfig,port";
+ reg = <1>;
+ swconfig,segment = "lan";
+ swconfig,portmap = <2 2>;
+ };
+
+ port@2 {
+ compatible = "swconfig,port";
+ reg = <2>;
+ swconfig,segment = "lan";
+ swconfig,portmap = <3 3>;
+ };
+
+ port@3 {
+ compatible = "swconfig,port";
+ reg = <3>;
+ swconfig,segment = "lan";
+ swconfig,portmap = <4 4>;
+ };
+
+ port@4 {
+ compatible = "swconfig,port";
+ reg = <4>;
+ swconfig,segment = "wan";
+ swconfig,portmap = <5 5>;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9344_qihoo_c301.dts b/target/linux/ath79/dts/ar9344_qihoo_c301.dts
new file mode 100644
index 0000000..616036f
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_qihoo_c301.dts
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Qihoo 360 C301";
+ compatible = "qihoo,c301";
+
+ aliases {
+ led-boot = &led_wlan_g;
+ led-failsafe = &led_wlan_o;
+ led-upgrade = &led_wlan_o;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ led_wlan_g: wlan_g {
+ label = "green:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wlan_o: wlan_o {
+ label = "orange:wlan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ reg_eth_led_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "eth_led_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ gpio = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+
+ usb_vbus: reg_usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&pinmux {
+ pmx_spi_cs1: pinmux_spi_cs1 {
+ pinctrl-single,bits = <0xc 0x07 0xff>;
+ };
+
+ pmx_led_switch: pinmux_led_switch {
+ pinctrl-single,bits = <0x0 0x2b2a2d00 0xffffff00>;
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&gpio {
+ gpio_ext_lna0 {
+ gpio-hog;
+ gpios = <14 0>;
+ output-high;
+ line-name = "c301:ext:lna0";
+ };
+
+ gpio_ext_lna1 {
+ gpio-hog;
+ gpios = <15 0>;
+ output-high;
+ line-name = "c301:ext:lna1";
+ };
+};
+
+&builtin_switch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_led_switch>;
+};
+
+&spi {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_spi_cs1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "devdata";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "devconf";
+ reg = <0x60000 0x10000>;
+ read-only;
+ };
+
+ partition@70000 {
+ compatible = "seama";
+ label = "firmware";
+ reg = <0x70000 0xf60000>;
+ };
+
+ partition@fd0000 {
+ label = "warm_start";
+ reg = <0xfd0000 0x10000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "action_image_config";
+ reg = <0xfe0000 0x10000>;
+ };
+
+ partition@ff0000 {
+ label = "radiocfg";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+
+ flash@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "firmware2";
+ reg = <0x0 0xf00000>;
+ };
+
+ partition@f00000 {
+ label = "privatedata";
+ reg = <0xf00000 0x100000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+ phy-supply = <&usb_vbus>;
+};
+
+&pcie {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+ };
+};
+
+&wmac {
+ status = "okay";
+ qca,no-eeprom;
+};
+
+ð1 {
+ status = "okay";
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <1>;
+ switch-only-mode = <1>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ phy-handle = <&swphy0>;
+};
diff --git a/target/linux/ath79/dts/ar9344_qxwlan_e750a-v4-16m.dts b/target/linux/ath79/dts/ar9344_qxwlan_e750a-v4-16m.dts
new file mode 100644
index 0000000..61389be
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_qxwlan_e750a-v4-16m.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_qxwlan_e750x.dtsi"
+
+/ {
+ model = "Qxwlan E750A v4 16M";
+ compatible = "qxwlan,e750a-v4-16m", "qca,ar9344";
+};
+
+&leds {
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&pridata 0x400>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&pridata 0x400>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <0>;
+ switch-only-mode = <1>;
+ };
+};
+
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0xf90000>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_qxwlan_e750a-v4-8m.dts b/target/linux/ath79/dts/ar9344_qxwlan_e750a-v4-8m.dts
new file mode 100644
index 0000000..e232cda
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_qxwlan_e750a-v4-8m.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_qxwlan_e750x.dtsi"
+
+/ {
+ model = "Qxwlan E750A v4 8M";
+ compatible = "qxwlan,e750a-v4-8m", "qca,ar9344";
+};
+
+&leds {
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&pridata 0x400>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&pridata 0x400>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <0>;
+ switch-only-mode = <1>;
+ };
+};
+
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0x790000>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_qxwlan_e750g-v8-16m.dts b/target/linux/ath79/dts/ar9344_qxwlan_e750g-v8-16m.dts
new file mode 100644
index 0000000..fb200fa
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_qxwlan_e750g-v8-16m.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_qxwlan_e750x.dtsi"
+
+/ {
+ model = "Qxwlan E750G v8 16M";
+ compatible = "qxwlan,e750g-v8-16m", "qca,ar9344";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRAP */
+ 0x50 0xcc35cc35 /* LED_CTRL0 */
+ 0x54 0xca35ca35 /* LED_CTRL1 */
+ 0x58 0xc935c935 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x06000000 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&pridata 0x400>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
+
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0xf90000>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_qxwlan_e750g-v8-8m.dts b/target/linux/ath79/dts/ar9344_qxwlan_e750g-v8-8m.dts
new file mode 100644
index 0000000..75ef13e
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_qxwlan_e750g-v8-8m.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_qxwlan_e750x.dtsi"
+
+/ {
+ model = "Qxwlan E750G v8 8M";
+ compatible = "qxwlan,e750g-v8-8m", "qca,ar9344";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRAP */
+ 0x50 0xcc35cc35 /* LED_CTRL0 */
+ 0x54 0xca35ca35 /* LED_CTRL1 */
+ 0x58 0xc935c935 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x06000000 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&pridata 0x400>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
+
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0x790000>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_qxwlan_e750x.dtsi b/target/linux/ath79/dts/ar9344_qxwlan_e750x.dtsi
new file mode 100644
index 0000000..a41e626
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_qxwlan_e750x.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ sig1 {
+ label = "green:sig1";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ sig2 {
+ label = "green:sig2";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ pridata: partition@50000 {
+ label = "pri-data";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ art: partition@60000 {
+ label = "art";
+ reg = <0x060000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9344_samsung_wam250.dts b/target/linux/ath79/dts/ar9344_samsung_wam250.dts
new file mode 100644
index 0000000..0f38ff8
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_samsung_wam250.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Samsung WAM250";
+ compatible = "samsung,wam250", "qca,ar9344";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "white:lan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "white:power";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ repeater {
+ label = "white:repeater";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "white:wlan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ mtd-mac-address = <&art 0x1002>;
+ mtd-mac-address-increment = <1>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x1002>;
+};
+
+&gpio {
+ lna0 {
+ line-name = "wam250:ext:lna0";
+ gpios = <19 GPIO_ACTIVE_HIGH>;
+ output-high;
+ gpio-hog;
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ label = "nvram";
+ reg = <0x050000 0x020000>;
+ read-only;
+ };
+
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0xf80000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9344_teltonika_rut955-h7v3c0.dts b/target/linux/ath79/dts/ar9344_teltonika_rut955-h7v3c0.dts
new file mode 100644
index 0000000..eb9606e
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_teltonika_rut955-h7v3c0.dts
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_teltonika_rut9xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Teltonika RUT955 H7V3C0";
+ compatible = "teltonika,rut955-h7v3c0", "teltonika,rut9xx", "qca,ar9344";
+
+ aliases {
+ led-boot = &led_system_green;
+ led-failsafe = &led_system_red;
+ led-running = &led_system_green;
+ led-upgrade = &led_system_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ signal0 {
+ label = "green:signal0";
+ gpios = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ signal1 {
+ label = "green:signal1";
+ gpios = <&gpio_ext 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ signal2 {
+ label = "green:signal2";
+ gpios = <&gpio_ext 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ signal3 {
+ label = "green:signal3";
+ gpios = <&gpio_ext 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ signal4 {
+ label = "green:signal4";
+ gpios = <&gpio_ext 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_system_red: system_red {
+ label = "red:system";
+ gpios = <&gpio_ext 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_system_green: system_green {
+ label = "green:system";
+ gpios = <&gpio_ext 6 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ gpio-line-names = "RS485_D", "led_wan", "wmac_lna", "mmc_cs",
+ "EXT_INT", "", "", "",
+ "", "", "", "",
+ "", "led_lan2", "led_lan1", "",
+ "i2c_scl", "i2c_sda", "", "",
+ "", "", "led_lan3", "",
+ "", "", "", "",
+ "", "", "", "";
+
+ ext_lna {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "rut955:wmac:ext_lna";
+ };
+
+ mmc_cs {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "rut955:mmc:cs";
+ };
+
+ ext_int {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "rut955:ext:int";
+ };
+
+ uart1_td {
+ gpio-hog;
+ gpios = <18 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "rut955:uart1:td";
+ };
+
+ uart1_rd {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "rut955:uart1:rd";
+ };
+
+ led_wan {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "rut955:led:wan";
+ };
+
+ led_lan2 {
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "rut955:led:lan2";
+ };
+
+ led_lan1 {
+ gpio-hog;
+ gpios = <14 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "rut955:led:lan1";
+ };
+
+ led_lan3 {
+ gpio-hog;
+ gpios = <22 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "rut955:led:lan3";
+ };
+};
+
+&i2c0 {
+ gpio_ext: gpio_ext@74 {
+ status = "okay";
+
+ compatible = "nxp,pca9539";
+ reg = <0x74>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ reset-gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ gpio-line-names = "signal_bar0", "signal_bar1", "signal_bar2", "signal_bar3",
+ "signal_bar4", "status_red", "status_green", "sim_sel",
+ "DOUT1", "DOUT2", "DIN2", "DIN1",
+ "MON", "MRST", "SDCD", "RS485_R";
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&config 0x0>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&config 0x0>;
+};
+
+&builtin_switch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_leds_switch>;
+};
+
+&wmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_ext_lna>;
+};
+
+&pinmux {
+ pmx_ext_lna: ext_lna {
+ // EXT_LNA0 on GPIO 2
+ pinctrl-single,bits = <0x0 0x002e0000 0x00ff0000>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_teltonika_rut955.dts b/target/linux/ath79/dts/ar9344_teltonika_rut955.dts
new file mode 100644
index 0000000..ba840a0
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_teltonika_rut955.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_teltonika_rut9xx.dtsi"
+
+/ {
+ model = "Teltonika RUT955";
+ compatible = "teltonika,rut955", "teltonika,rut9xx", "qca,ar9344";
+
+ aliases {
+ led-boot = &led_system_green;
+ led-failsafe = &led_system_red;
+ led-running = &led_system_green;
+ led-upgrade = &led_system_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ signal0 {
+ label = "green:signal0";
+ gpios = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ signal1 {
+ label = "green:signal1";
+ gpios = <&gpio_ext 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ signal2 {
+ label = "green:signal2";
+ gpios = <&gpio_ext 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ signal3 {
+ label = "green:signal3";
+ gpios = <&gpio_ext 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ signal4 {
+ label = "green:signal4";
+ gpios = <&gpio_ext 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_system_red: system_red {
+ label = "red:system";
+ gpios = <&gpio_ext 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_system_green: system_green {
+ label = "green:system";
+ gpios = <&gpio_ext 6 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ gpio-line-names = "RS485_D", "led_wan", "DIN3", "mmc_cs",
+ "ext_sck", "", "", "",
+ "", "", "", "",
+ "ext_mosi", "led_lan2", "led_lan1", "",
+ "i2c_scl", "i2c_sda", "", "DIN2",
+ "ext_cs", "DIN1", "led_lan3", "",
+ "", "", "", "",
+ "", "", "", "";
+
+ ext_sck {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "rut955:ext:sck";
+ };
+
+ ext_mosi {
+ gpio-hog;
+ gpios = <12 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "rut955:ext:mosi";
+ };
+
+ ext_cs {
+ gpio-hog;
+ gpios = <20 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "rut955:ext:cs";
+ };
+
+ mmc_cs {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "rut955:mmc:cs";
+ };
+
+ uart1_td {
+ gpio-hog;
+ gpios = <18 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "rut955:uart1:td";
+ };
+
+ uart1_rd {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "rut955:uart1:rd";
+ };
+
+ led_wan {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "rut955:led:wan";
+ };
+
+ led_lan2 {
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "rut955:led:lan2";
+ };
+
+ led_lan1 {
+ gpio-hog;
+ gpios = <14 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "rut955:led:lan1";
+ };
+
+ led_lan3 {
+ gpio-hog;
+ gpios = <22 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "rut955:led:lan3";
+ };
+};
+
+&spi {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_spi>, <&pmx_spi_ext>;
+
+ gpio_ext: gpio_ext@2 {
+ compatible = "fairchild,74hc595";
+ reg = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <2>;
+ spi-max-frequency = <10000000>;
+ gpio-line-names = "signal_bar0", "signal_bar1", "signal_bar2", "signal_bar3",
+ "signal_bar4", "status_red", "status_green", "sim_sel",
+ "DOUT1", "DOUT2", "modem_vbus", "modem_rst",
+ "DOUT3", "RS485_R", "SDCS", "HWRST";
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&config 0x0>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&config 0x0>;
+};
+
+&builtin_switch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_leds_switch>;
+};
+
+&pinmux {
+ pmx_spi_ext: spi_ext {
+ // 2nd SCK on GPIO 4, 2nd MOSI on GPIO 12, SPI_CS2 on GPIO 20
+ pinctrl-single,bits = <0x4 0x0a 0xff>,
+ <0xc 0x0b 0xff>,
+ <0x14 0x08 0xff>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_teltonika_rut9xx.dtsi b/target/linux/ath79/dts/ar9344_teltonika_rut9xx.dtsi
new file mode 100644
index 0000000..d9c66d2
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_teltonika_rut9xx.dtsi
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "teltonika,rut9xx", "qca,ar9344";
+
+ aliases {
+ serial1 = &hs_uart;
+ label-mac-device = ð1;
+ };
+
+ i2c0: i2c {
+ compatible = "i2c-gpio";
+ scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hwmon@4d {
+ compatible = "microchip,mcp3221";
+ reg = <0x4d>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&hs_uart {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_uart2>;
+
+ rts-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ rs485-rts-active-low;
+ linux,rs485-enabled-at-boot-time;
+};
+
+&spi {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_spi>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ config: partition@20000 {
+ label = "config";
+ reg = <0x20000 0x10000>;
+ read-only;
+ };
+
+ art: partition@30000 {
+ label = "art";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x40000 0xf30000>;
+ compatible = "tplink,firmware";
+ };
+
+ partition@f70000 {
+ label = "event-log";
+ reg = <0xf70000 0x90000>;
+ read-only;
+ };
+ };
+ };
+
+ microsd@1 {
+ status = "disabled";
+
+ compatible = "mmc-spi-slot";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+ voltage-ranges = <3200 3400>;
+ broken-cd;
+ };
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ port@1 {
+ compatible = "usb-a-connector";
+ reg = <1>;
+ };
+
+ port@3 {
+ label = "RS-232 serial adapter";
+ reg = <3>;
+ };
+
+ port@4 {
+ label = "internal wwan modem";
+ reg = <4>;
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&config 0x0>;
+ mtd-mac-address-increment = <2>;
+};
+
+&pinmux {
+ pmx_spi: spi {
+ // SPI_CS1 on GPIO 3
+ pinctrl-single,bits = <0x0 0x07000000 0xff000000>;
+ };
+
+ pmx_leds_switch: leds_switch {
+ // switch port LEDs on GPIO 1, GPIO 13, GPIO 14 and GPIO 22
+ pinctrl-single,bits = <0x00 0x00002d00 0x0000ff00>,
+ <0x0c 0x002c2b00 0x00ffff00>,
+ <0x14 0x002a0000 0x00ff0000>;
+ };
+
+ pmx_uart2: uart2 {
+ // UART1_DTR on GPIO 0, UART1_RD on GPIO 11, UART1_TD on GPIO 18
+ pinctrl-single,bits = <0x00 0x00000000 0x000000ff>,
+ <0x10 0x004f0000 0x00ff0000>,
+ <0x3c 0x000b0000 0x00ff0000>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe.dtsi b/target/linux/ath79/dts/ar9344_tplink_cpe.dtsi
new file mode 100644
index 0000000..fd6aa0f
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe.dtsi
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+ aliases {
+ label-mac-device = &wmac;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "partition-table";
+ reg = <0x020000 0x010000>;
+ read-only;
+ };
+
+ info: partition@30000 {
+ label = "info";
+ reg = <0x030000 0x010000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x040000 0x780000>;
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <IH_MAGIC_OKLI>;
+ openwrt,offset = <0x3000>;
+ };
+
+ partition@7c0000 {
+ label = "config";
+ reg = <0x7c0000 0x030000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&info 0x8>;
+};
+
+ð1 {
+ status = "okay";
+};
+
+&gpio {
+ gpio_ext_lna0 {
+ gpio-hog;
+ gpios = <18 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "tp-link:ext:lna0";
+ };
+
+ gpio_ext_lna1 {
+ gpio-hog;
+ gpios = <19 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "tp-link:ext:lna1";
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe210-v1.dts b/target/linux/ath79/dts/ar9344_tplink_cpe210-v1.dts
new file mode 100644
index 0000000..49b1e99
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe210-v1.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_cpe_2port.dtsi"
+
+/ {
+ compatible = "tplink,cpe210-v1", "qca,ar9344";
+ model = "TP-Link CPE210 v1";
+};
+
+&led_link4 {
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe220-v2.dts b/target/linux/ath79/dts/ar9344_tplink_cpe220-v2.dts
new file mode 100644
index 0000000..73bc246
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe220-v2.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_cpe_2port.dtsi"
+
+/ {
+ compatible = "tplink,cpe220-v2", "qca,ar9344";
+ model = "TP-Link CPE220 v2";
+};
+
+&led_link4 {
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe510-v1.dts b/target/linux/ath79/dts/ar9344_tplink_cpe510-v1.dts
new file mode 100644
index 0000000..b1fe236
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe510-v1.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_cpe_2port.dtsi"
+
+/ {
+ compatible = "tplink,cpe510-v1", "qca,ar9344";
+ model = "TP-Link CPE510 v1";
+};
+
+&led_link4 {
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe510-v2.dts b/target/linux/ath79/dts/ar9344_tplink_cpe510-v2.dts
new file mode 100644
index 0000000..9985603
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe510-v2.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_cpe_1port.dtsi"
+
+/ {
+ compatible = "tplink,cpe510-v2", "qca,ar9344";
+ model = "TP-Link CPE510 v2";
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe510-v3.dts b/target/linux/ath79/dts/ar9344_tplink_cpe510-v3.dts
new file mode 100644
index 0000000..5a9d0d4
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe510-v3.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_cpe_1port.dtsi"
+
+/ {
+ compatible = "tplink,cpe510-v3", "qca,ar9344";
+ model = "TP-Link CPE510 v3";
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe610-v1.dts b/target/linux/ath79/dts/ar9344_tplink_cpe610-v1.dts
new file mode 100644
index 0000000..c495eb2
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe610-v1.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_cpe.dtsi"
+
+/ {
+ model = "TP-Link CPE610 v1";
+ compatible = "tplink,cpe610-v1", "qca,ar9344";
+
+ aliases {
+ led-boot = &led_lan;
+ led-failsafe = &led_lan;
+ led-upgrade = &led_lan;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_lan: lan {
+ label = "green:lan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe610-v2.dts b/target/linux/ath79/dts/ar9344_tplink_cpe610-v2.dts
new file mode 100644
index 0000000..fa533d9
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe610-v2.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_cpe.dtsi"
+
+/ {
+ model = "TP-Link CPE610 v2";
+ compatible = "tplink,cpe610-v2", "qca,ar9344";
+
+ aliases {
+ led-boot = &led_lan;
+ led-failsafe = &led_lan;
+ led-upgrade = &led_lan;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_lan: lan {
+ label = "green:lan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe_1port.dtsi b/target/linux/ath79/dts/ar9344_tplink_cpe_1port.dtsi
new file mode 100644
index 0000000..a1dca81
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe_1port.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_cpe.dtsi"
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ link1 {
+ label = "green:link1";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ link2 {
+ label = "green:link2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ link3 {
+ label = "green:link3";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led_system: link4 {
+ label = "green:link4";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe_2port.dtsi b/target/linux/ath79/dts/ar9344_tplink_cpe_2port.dtsi
new file mode 100644
index 0000000..e7d33ab
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe_2port.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_cpe.dtsi"
+
+/ {
+ aliases {
+ led-boot = &led_link4;
+ led-failsafe = &led_link4;
+ led-running = &led_link4;
+ led-upgrade = &led_link4;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan0 {
+ label = "green:lan0";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ link1 {
+ label = "green:link1";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ link2 {
+ label = "green:link2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ link3 {
+ label = "green:link3";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led_link4: link4 {
+ label = "green:link4";
+ };
+ };
+};
+
+ð1 {
+ mtd-mac-address = <&info 0x8>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <0>;
+ switch-only-mode = <1>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_tl-wdr3500-v1.dts b/target/linux/ath79/dts/ar9344_tplink_tl-wdr3500-v1.dts
new file mode 100644
index 0000000..59a0634
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_tl-wdr3500-v1.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_tl-wdrxxxx.dtsi"
+
+/ {
+ model = "TP-Link TL-WDR3500 v1";
+ compatible = "tplink,tl-wdr3500-v1", "qca,ar9344";
+
+ aliases {
+ label-mac-device = &wmac;
+ };
+};
+
+&leds {
+ usb {
+ label = "green:usb";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port>;
+ };
+};
+
+&gpio {
+ usb_power {
+ gpio-hog;
+ gpios = <12 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "tp-link:power:usb";
+ };
+};
+
+&pinmux {
+ pmx_led_wan_lan: pinmux_led_wan_lan {
+ pinctrl-single,bits = <0x10 0x2c2d0000 0xffff0000>,
+ <0x14 0x292a2b 0xffffff>;
+ };
+};
+
+&builtin_switch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_led_wan_lan>;
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&ath9k {
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
+
+&wmac {
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <0>;
+ switch-only-mode = <1>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <2>;
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_tl-wdr3600-v1.dts b/target/linux/ath79/dts/ar9344_tplink_tl-wdr3600-v1.dts
new file mode 100644
index 0000000..63cca78
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_tl-wdr3600-v1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_tl-wdr4300.dtsi"
+
+/ {
+ model = "TP-Link TL-WDR3600 v1";
+ compatible = "tplink,tl-wdr3600-v1", "qca,ar9344";
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300-v1-il.dts b/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300-v1-il.dts
new file mode 100644
index 0000000..fa81e85
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300-v1-il.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_tl-wdr4300.dtsi"
+
+/ {
+ model = "TP-Link TL-WDR4300 v1 (IL)";
+ compatible = "tplink,tl-wdr4300-v1-il", "qca,ar9344";
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300-v1.dts b/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300-v1.dts
new file mode 100644
index 0000000..a248ac3
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300-v1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_tl-wdr4300.dtsi"
+
+/ {
+ model = "TP-Link TL-WDR4300 v1";
+ compatible = "tplink,tl-wdr4300-v1", "qca,ar9344";
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi b/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi
new file mode 100644
index 0000000..21fd079
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_tl-wdrxxxx.dtsi"
+
+/ {
+ aliases {
+ label-mac-device = &ath9k;
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_usb1_power {
+ gpio-export,name = "tp-link:power:usb1";
+ gpio-export,output = <1>;
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_usb2_power {
+ gpio-export,name = "tp-link:power:usb2";
+ gpio-export,output = <1>;
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_ext_lna0 {
+ gpio-export,name = "tp-link:ext:lna0";
+ gpio-export,output = <1>;
+ gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_ext_lna1 {
+ gpio-export,name = "tp-link:ext:lna1";
+ gpio-export,output = <1>;
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&leds {
+ usb1 {
+ label = "green:usb1";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ usb2 {
+ label = "green:usb2";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port2>;
+ linux,default-trigger = "usbport";
+ };
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ #trigger-source-cells = <0>;
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ hub_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&ath9k {
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+
+&wmac {
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+ 0x10 0x80000080 /* POWER_ON_STRAP */
+ 0x50 0xc737c737 /* LED_CTRL0 */
+ 0x54 0x00000000 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x0030c300 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ /* default for ar934x, except for 1000M */
+ pll-data = <0x06000000 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_tl-wdr4310-v1.dts b/target/linux/ath79/dts/ar9344_tplink_tl-wdr4310-v1.dts
new file mode 100644
index 0000000..287b021
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_tl-wdr4310-v1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_tl-wdr4300.dtsi"
+
+/ {
+ model = "TP-Link TL-WDR4310 v1";
+ compatible = "tplink,tl-wdr4310-v1", "qca,ar9344";
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_tl-wdrxxxx.dtsi b/target/linux/ath79/dts/ar9344_tplink_tl-wdrxxxx.dtsi
new file mode 100644
index 0000000..a3f4dc0
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_tl-wdrxxxx.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ qss {
+ label = "green:qss";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wifi {
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <33000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x7d0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,0033";
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_wbs210-v1.dts b/target/linux/ath79/dts/ar9344_tplink_wbs210-v1.dts
new file mode 100644
index 0000000..74a6b9a
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_wbs210-v1.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_cpe_2port.dtsi"
+
+/ {
+ compatible = "tplink,wbs210-v1", "qca,ar9344";
+ model = "TP-Link WBS210 v1";
+};
+
+&led_link4 {
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_wbs210-v2.dts b/target/linux/ath79/dts/ar9344_tplink_wbs210-v2.dts
new file mode 100644
index 0000000..866838b
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_wbs210-v2.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_cpe_2port.dtsi"
+
+/ {
+ compatible = "tplink,wbs210-v2", "qca,ar9344";
+ model = "TP-Link WBS210 v2";
+};
+
+&led_link4 {
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_wbs510-v1.dts b/target/linux/ath79/dts/ar9344_tplink_wbs510-v1.dts
new file mode 100644
index 0000000..ff5b4dd
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_wbs510-v1.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_cpe_2port.dtsi"
+
+/ {
+ compatible = "tplink,wbs510-v1", "qca,ar9344";
+ model = "TP-Link WBS510 v1";
+};
+
+&led_link4 {
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+};
diff --git a/target/linux/ath79/dts/ar9344_tplink_wbs510-v2.dts b/target/linux/ath79/dts/ar9344_tplink_wbs510-v2.dts
new file mode 100644
index 0000000..2b3baeb
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_wbs510-v2.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_cpe_2port.dtsi"
+
+/ {
+ compatible = "tplink,wbs510-v2", "qca,ar9344";
+ model = "TP-Link WBS510 v2";
+};
+
+&led_link4 {
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+};
diff --git a/target/linux/ath79/dts/ar9344_ubnt_unifi-ap-pro.dts b/target/linux/ath79/dts/ar9344_ubnt_unifi-ap-pro.dts
new file mode 100644
index 0000000..4612ae1
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_ubnt_unifi-ap-pro.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Ubiquiti UniFi AP Pro";
+ compatible = "ubnt,unifi-ap-pro";
+
+ aliases {
+ led-boot = &led_white;
+ led-failsafe = &led_white;
+ led-running = &led_blue;
+ led-upgrade = &led_blue;
+ label-mac-device = ð0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_white: led-white {
+ label = "white:dome";
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_blue: led-blue {
+ label = "blue:dome";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xf60000>;
+
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x300000>;
+ /* Can be resized w/o issues.
+ * U-Boot can load kernel from the
+ * entirety of the "firmware" partition space.
+ */
+ };
+
+ partition@300000 {
+ label = "rootfs";
+ reg = <0x300000 0xc60000>;
+ };
+ };
+
+ partition@fb0000 {
+ label = "cfg";
+ reg = <0xfb0000 0x40000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "pci168c,0033";
+ reg = <0 0 0 0 0>;
+ qca,no-eeprom;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x4 0x7600000 /* PORT0 PAD MODE CTRL */
+ 0x10 0x80000080 /* POWER_ON_STRAP */
+ 0x7c 0x7e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x6000000 0x101 0x1616>;
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
diff --git a/target/linux/ath79/dts/ar9344_wd_mynet-n750.dts b/target/linux/ath79/dts/ar9344_wd_mynet-n750.dts
new file mode 100644
index 0000000..e3faa39
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_wd_mynet-n750.dts
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Western Digital My Net N750";
+ compatible = "wd,mynet-n750", "qca,ar9344";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi {
+ label = "blue:wireless";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ internet {
+ label = "blue:internet";
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "blue:wps";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_power: power {
+ label = "blue:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&gpio {
+ gpio_ext_lna0 {
+ gpio-hog;
+ gpios = <15 0>;
+ output-high;
+ line-name = "mynet-n750:ext:lna0";
+ };
+
+ gpio_ext_lna1 {
+ gpio-hog;
+ gpios = <18 0>;
+ output-high;
+ line-name = "mynet-n750:ext:lna1";
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x000000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "bdcfg";
+ reg = <0x040000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "devdata";
+ reg = <0x050000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "devconf";
+ reg = <0x060000 0x10000>;
+ read-only;
+ };
+
+ partition@70000 {
+ compatible = "seama";
+ label = "firmware";
+ reg = <0x070000 0xf80000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ #trigger-source-cells = <0>;
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ hub_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "pci168c,0033";
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ qca,no-eeprom;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ switch0@1f {
+ compatible = "qca,ar8327";
+ reg = <0x1f>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+ 0x10 0x80000080 /* POWER_ON_STRAP */
+ 0x50 0xc737c737 /* LED_CTRL0 */
+ 0x54 0x00000000 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x0030c300 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ /* default for ar934x, except for 1000M */
+ pll-data = <0x06000000 0x00000101 0x00001616>;
+
+ phy-mode = "rgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_wd_mynet-wifi-rangeextender.dts b/target/linux/ath79/dts/ar9344_wd_mynet-wifi-rangeextender.dts
new file mode 100644
index 0000000..7313e9a
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_wd_mynet-wifi-rangeextender.dts
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Western Digital My Net Wi-Fi Range Extender";
+ compatible = "wd,mynet-wifi-rangeextender", "qca,ar9344";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "blue:power";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ /* LED has no off state. It's either on or it blinks */
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "blue:wifi";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi-rssi-low {
+ label = "blue:rssi-low";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi-rssi-med {
+ label = "blue:rssi-med";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi-rssi-max {
+ label = "blue:rssi-max";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ band-switch {
+ linux,code = <BTN_1>;
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ linux,input-type = <EV_SW>;
+ };
+
+ wps {
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = /* "s25fl064k", */ "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x40000 0x7a0000>;
+ compatible = "cybertan,trx";
+ };
+
+ nvram: partition@7e0000 {
+ label = "nvram";
+ reg = <0x7e0000 0x10000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,0030";
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ /* wifi MAC is stored in nvram */
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x10>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x02000000 0x00000101 0x00001313>;
+
+ /* ethernet MAC is stored in nvram */
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy4>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-gmac0 = <1>;
+ rxd-delay = <3>;
+ rxdv-delay = <3>;
+ };
+};
+
+&mdio1 {
+ status = "disabled";
+};
diff --git a/target/linux/ath79/dts/ar9344_winchannel_wb2000.dts b/target/linux/ath79/dts/ar9344_winchannel_wb2000.dts
new file mode 100644
index 0000000..72cd5aa
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_winchannel_wb2000.dts
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Winchannel WB2000";
+ compatible = "winchannel,wb2000", "qca,ar9344";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH
+ &gpio 16 GPIO_ACTIVE_HIGH
+ >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan2g {
+ label = "green:2g";
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ usb {
+ label = "green:usb";
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&hub_port1>, <&hub_port2>;
+ linux,default-trigger = "usbport";
+ };
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "green:5g";
+ gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ compatible = "denx,uimage";
+ };
+
+ partition@fd0000 {
+ label = "nvram";
+ reg = <0xfd0000 0x10000>;
+ read-only;
+ };
+
+ art: partition@fe0000 {
+ label = "art";
+ reg = <0xfe0000 0x10000>;
+ read-only;
+ };
+
+ addr: partition@ff0000 {
+ label = "addr";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,0030";
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ mtd-mac-address = <&addr 0x0>;
+ mtd-mac-address-increment = <0x10>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ #trigger-source-cells = <0>;
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ hub_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&addr 0x0>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x10>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0xe000000 0x04000101 0x04001313>;
+
+ mtd-mac-address = <&addr 0x0>;
+ mtd-mac-address-increment = <0x21>;
+
+ phy-mode = "rgmii-rxid";
+ phy-handle = <&phy4>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-gmac0 = <1>;
+ rxd-delay = <1>;
+ rxdv-delay = <1>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts b/target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts
new file mode 100644
index 0000000..a3b4534
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "ZBT WD323";
+ compatible = "zbtlink,zbt-wd323", "qca,ar9344";
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio15 &enable_gpio19>;
+
+ sda-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ scl-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+
+ pcf8563: pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio20_gpio22>;
+
+ wifi {
+ label = "green:wifi";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan1 {
+ label = "orange:lan1";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "orange:lan2";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&wdt {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio21>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+ phy-handle = <&swphy4>;
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ status = "okay";
+ mtd-mac-address = <&art 0x6>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <22000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot@0 {
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ uboot-env@40000 {
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ firmware@50000 {
+ compatible = "denx,uimage";
+ reg = <0x50000 0xfa0000>;
+ };
+
+ art: art@ff0000 {
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+};
+
+&pinmux {
+ enable_gpio15: pinmux_enable_gpio15 {
+ pinctrl-single,bits = <0xc 0x0 0xff000000>;
+ };
+
+ enable_gpio19: pinmux_enable_gpio19 {
+ pinctrl-single,bits = <0x10 0x0 0xff000000>;
+ };
+
+ enable_gpio20_gpio22: pinmux_enable_gpio20_gpio22 {
+ pinctrl-single,bits = <0x14 0x0 0xff00ff>;
+ };
+
+ enable_gpio21: pinmux_enable_gpio21 {
+ pinctrl-single,bits = <0x14 0x0 0xff00>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar934x.dtsi b/target/linux/ath79/dts/ar934x.dtsi
new file mode 100644
index 0000000..42fbab4
--- /dev/null
+++ b/target/linux/ath79/dts/ar934x.dtsi
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ath79.dtsi"
+
+/ {
+ compatible = "qca,ar9340";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &uart;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips74Kc";
+ clocks = <&pll ATH79_CLK_CPU>;
+ reg = <0>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ref: ref {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "ref";
+ };
+ };
+
+ ahb: ahb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ apb: apb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ddr_ctrl: memory-controller@18000000 {
+ compatible = "qca,ar9340-ddr-controller",
+ "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x12c>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ uart: uart@18020000 {
+ compatible = "ns16550a";
+ reg = <0x18020000 0x2c>;
+
+ interrupts = <3>;
+
+ clocks = <&pll ATH79_CLK_REF>;
+ clock-names = "uart";
+
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ no-loopback-test;
+ };
+
+ gpio: gpio@18040000 {
+ compatible = "qca,ar9340-gpio";
+ reg = <0x18040000 0x2c>;
+
+ interrupts = <2>;
+ ngpios = <23>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pinmux: pinmux@1804002c {
+ compatible = "pinctrl-single";
+
+ reg = <0x1804002c 0x44>;
+
+ #size-cells = <0>;
+
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x1>;
+ #pinctrl-cells = <2>;
+
+ jtag_disable_pins: pinmux_jtag_disable_pins {
+ pinctrl-single,bits = <0x40 0x2 0x2>;
+ };
+ };
+
+ pll: pll-controller@18050000 {
+ compatible = "qca,ar9340-pll", "syscon";
+ reg = <0x18050000 0x4c>;
+
+ #clock-cells = <1>;
+ clocks = <&ref>;
+ clock-names = "ref";
+ clock-output-names = "cpu", "ddr", "ahb";
+ };
+
+ wdt: wdt@18060008 {
+ compatible = "qca,ar9340-wdt", "qca,ar7130-wdt";
+ reg = <0x18060008 0x8>;
+
+ interrupts = <4>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "wdt";
+ };
+
+ rst: reset-controller@1806001c {
+ compatible = "qca,ar9340-reset", "qca,ar7100-reset";
+ reg = <0x1806001c 0x4>;
+
+ #reset-cells = <1>;
+ };
+
+ hs_uart: uart@18500000 {
+ compatible = "qca,ar9330-uart";
+ reg = <0x18500000 0x14>;
+
+ interrupts = <6>;
+ interrupt-parent = <&miscintc>;
+
+ clocks = <&pll ATH79_CLK_UART1>;
+ clock-names = "uart";
+
+ status = "disabled";
+ };
+ };
+
+ gmac: gmac@18070000 {
+ compatible = "qca,ar9340-gmac";
+ reg = <0x18070000 0x14>;
+ };
+
+ wmac: wmac@18100000 {
+ compatible = "qca,ar9340-wmac";
+ reg = <0x18100000 0x20000>;
+
+ status = "disabled";
+ };
+
+ usb: usb@1b000000 {
+ compatible = "generic-ehci";
+ reg = <0x1b000000 0x1d8>;
+
+ interrupts = <3>;
+ resets = <&rst 5>;
+ reset-names = "usb-host";
+
+ has-transaction-translator;
+ caps-offset = <0x100>;
+
+ phy-names = "usb-phy";
+ phys = <&usb_phy>;
+
+ status = "disabled";
+ };
+
+ nand: nand@1b000200 {
+ compatible = "qca,ar934x-nand";
+ reg = <0x1b000200 0xb8>;
+
+ interrupts = <21>;
+ interrupt-parent = <&miscintc>;
+
+ resets = <&rst 14>;
+ reset-names = "nand";
+
+ nand-ecc-mode = "hw";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi: spi@1f000000 {
+ compatible = "qca,ar934x-spi";
+ reg = <0x1f000000 0x1c>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ usb_phy: usb-phy {
+ compatible = "qca,ar9340-usb-phy", "qca,ar7200-usb-phy";
+
+ reset-names = "usb-phy-analog", "usb-phy", "usb-suspend-override";
+ resets = <&rst 11>, <&rst 4>, <&rst 3>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+};
+
+&mdio0 {
+ compatible = "qca,ar9340-mdio";
+};
+
+ð0 {
+ compatible = "qca,ar9340-eth", "syscon";
+
+ pll-data = <0x16000000 0x00000101 0x00001616>;
+ pll-reg = <0x4 0x2c 17>;
+ pll-handle = <&pll>;
+ resets = <&rst 9>, <&rst 22>;
+ reset-names = "mac", "mdio";
+ clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
+ clock-names = "eth", "mdio";
+};
+
+&mdio1 {
+ status = "okay";
+
+ compatible = "qca,ar9340-mdio";
+ resets = <&rst 23>;
+ reset-names = "mdio";
+ builtin-switch;
+
+ builtin_switch: switch0@1f {
+ compatible = "qca,ar8229";
+
+ reg = <0x1f>;
+ resets = <&rst 8>;
+ reset-names = "switch";
+ phy-mode = "gmii";
+ qca,mib-poll-interval = <500>;
+ qca,phy4-mii-enable;
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ swphy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "mii";
+ };
+
+ swphy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "mii";
+ };
+ };
+ };
+};
+
+ð1 {
+ compatible = "qca,ar9340-eth", "syscon";
+
+ resets = <&rst 13>;
+ reset-names = "mac";
+ clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
+ clock-names = "eth", "mdio";
+ phy-mode = "gmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
diff --git a/target/linux/ath79/dts/ar934x_senao_loader.dtsi b/target/linux/ath79/dts/ar934x_senao_loader.dtsi
new file mode 100644
index 0000000..8247cc8
--- /dev/null
+++ b/target/linux/ath79/dts/ar934x_senao_loader.dtsi
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+ virtual_flash {
+ compatible = "mtd-concat";
+
+ devices = <&fwconcat0 &fwconcat1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <0x73714f4b>;
+ label = "firmware";
+ reg = <0x0 0x0>;
+ };
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ label = "custom";
+ reg = <0x050000 0x050000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "loader";
+ reg = <0x0a0000 0x010000>;
+ };
+
+ fwconcat1: partition@b0000 {
+ label = "fwconcat1";
+ reg = <0x0b0000 0x170000>;
+ };
+
+ fwconcat0: partition@220000 {
+ label = "fwconcat0";
+ reg = <0x220000 0xbd0000>;
+ };
+
+ partition@df0000 {
+ label = "failsafe";
+ reg = <0xdf0000 0x200000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/ath79.dtsi b/target/linux/ath79/dts/ath79.dtsi
new file mode 100644
index 0000000..89d9058
--- /dev/null
+++ b/target/linux/ath79/dts/ath79.dtsi
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/clock/ath79-clk.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpuintc: interrupt-controller {
+ compatible = "qca,ar7100-cpu-intc";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+
+ apb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&miscintc>;
+
+ miscintc: interrupt-controller@18060010 {
+ compatible = "qca,ar7240-misc-intc";
+ reg = <0x18060010 0x4>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ eth0: eth@19000000 {
+ status = "disabled";
+
+ compatible = "qca,ath79-eth", "syscon";
+ reg = <0x19000000 0x200>;
+
+ interrupts = <4>;
+ phy-mode = "mii";
+
+ mdio0: mdio {
+ status = "disabled";
+
+ compatible = "qca,ath79-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ regmap = <ð0>;
+
+ clocks = <&pll ATH79_CLK_MDIO>;
+ clock-names = "ref";
+ };
+ };
+
+ eth1: eth@1a000000 {
+ status = "disabled";
+
+ compatible = "qca,ath79-eth", "syscon";
+ reg = <0x1a000000 0x200>;
+
+ interrupts = <5>;
+ phy-mode = "mii";
+
+ mdio1: mdio {
+ status = "disabled";
+
+ compatible = "qca,ath79-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ regmap = <ð1>;
+
+ clocks = <&pll ATH79_CLK_MDIO>;
+ clock-names = "ref";
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9531_8dev_lima.dts b/target/linux/ath79/dts/qca9531_8dev_lima.dts
new file mode 100644
index 0000000..7fc84a6
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_8dev_lima.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "8dev,lima", "qca,qca9531";
+ model = "8devices Lima";
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+
+ dr_mode = "host";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ /* Winbond W25Q256 SPI flash */
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <45000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x040000>;
+ };
+
+ art: partition@80000 {
+ label = "art";
+ reg = <0x080000 0x040000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x0c0000 0xf40000>;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ mtd-mac-address = <&art 0x6>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <1>;
+ switch-phy-swap = <1>;
+ };
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9531_alfa-network_n2q.dts b/target/linux/ath79/dts/qca9531_alfa-network_n2q.dts
new file mode 100644
index 0000000..40eabd0
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_alfa-network_n2q.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9531_alfa-network_r36a.dtsi"
+
+/ {
+ model = "ALFA Network N2Q";
+ compatible = "alfa-network,n2q", "qca,qca9531";
+
+ aliases {
+ led-boot = &led_usb;
+ led-failsafe = &led_usb;
+ led-upgrade = &led_usb;
+ };
+
+ gpio-export-pcf8574 {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ poe-passthrough {
+ gpio-export,name = "poe-passthrough";
+ gpio-export,output = <1>;
+ gpios = <&pcf8574 0 GPIO_ACTIVE_LOW>;
+ };
+
+ usb-power {
+ gpio-export,name = "usb-power";
+ gpio-export,output = <0>;
+ gpios = <&pcf8574 2 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sda-gpios = <&gpio 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ pcf8574: pcf8574@20 {
+ compatible = "nxp,pcf8574";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio4 &enable_gpio16>;
+
+ lan1 {
+ label = "orange:lan1";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "orange:lan2";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led_usb: usb {
+ label = "green:usb";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port0>;
+ };
+
+ minipcie {
+ label = "green:minipcie";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ leds-pcf8574 {
+ compatible = "gpio-leds";
+
+ poe-passthrough {
+ label = "green:poe-passthrough";
+ gpios = <&pcf8574 1 GPIO_ACTIVE_LOW>;
+ };
+
+ signal1 {
+ label = "red:signal1";
+ gpios = <&pcf8574 3 GPIO_ACTIVE_LOW>;
+ };
+
+ signal2 {
+ label = "orange:signal2";
+ gpios = <&pcf8574 4 GPIO_ACTIVE_LOW>;
+ };
+
+ signal3 {
+ label = "green:signal3";
+ gpios = <&pcf8574 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+ð0 {
+ mtd-mac-address = <&art 0x1002>;
+ mtd-mac-address-increment = <(-2)>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x1002>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9531_alfa-network_pi-wifi4.dts b/target/linux/ath79/dts/qca9531_alfa-network_pi-wifi4.dts
new file mode 100644
index 0000000..42f2c9f
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_alfa-network_pi-wifi4.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9531_alfa-network_r36a.dtsi"
+
+/ {
+ model = "ALFA Network Pi-WiFi4";
+ compatible = "alfa-network,pi-wifi4", "qca,qca9531";
+
+ aliases {
+ led-boot = &led_usb;
+ led-failsafe = &led_usb;
+ led-upgrade = &led_usb;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio4 &enable_gpio16>;
+
+ lan_data {
+ label = "orange:lan_data";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ lan_link {
+ label = "green:lan_link";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ led_usb: usb {
+ label = "green:usb";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&gl850g_port1>, <&gl850g_port2>,
+ <&gl850g_port3>, <&gl850g_port4>;
+ };
+
+ wlan {
+ label = "blue:wlan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+ð0 {
+ mtd-mac-address = <&art 0x1002>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
+
+&gpio_export {
+ usb-power {
+ gpio-export,name = "usb-power";
+ gpio-export,output = <1>;
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&hub_port0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gl850g_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ gl850g_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+
+ gl850g_port3: port@3 {
+ reg = <3>;
+ #trigger-source-cells = <0>;
+ };
+
+ gl850g_port4: port@4 {
+ reg = <4>;
+ #trigger-source-cells = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9531_alfa-network_r36a.dts b/target/linux/ath79/dts/qca9531_alfa-network_r36a.dts
new file mode 100644
index 0000000..ab65369
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_alfa-network_r36a.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9531_alfa-network_r36a.dtsi"
+
+/ {
+ model = "ALFA Network R36A";
+ compatible = "alfa-network,r36a", "qca,qca9531";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio4 &enable_gpio16>;
+
+ lan {
+ label = "blue:lan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status: status {
+ label = "blue:status";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "blue:usb";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+
+ wan {
+ label = "blue:wan";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "blue:wlan";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+ð0 {
+ mtd-mac-address = <&art 0x1002>;
+ mtd-mac-address-increment = <(-2)>;
+};
+
+ð1 {
+ /* Workaround: keep the Ethernet interfaces order/mapping correct
+ * (GMAC0 -> eth0, GMAC1 -> eth1, same as in old ar71xx target) */
+ compatible = "qca,qca9530-eth", "syscon", "simple-mfd";
+
+ mtd-mac-address = <&art 0x1002>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+&gpio_export {
+ usb-power {
+ gpio-export,name = "usb-power";
+ gpio-export,output = <1>;
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&keys {
+ rfkill {
+ label = "rfkill";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9531_alfa-network_r36a.dtsi b/target/linux/ath79/dts/qca9531_alfa-network_r36a.dtsi
new file mode 100644
index 0000000..4c9346d
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_alfa-network_r36a.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = &wmac;
+ };
+
+ gpio_export: gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ watchdog-enable {
+ gpio-export,name = "watchdog-enable";
+ gpio-export,output = <1>;
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys: keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ hw_algo = "toggle";
+ hw_margin_ms = <25000>;
+ always-running;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+};
+
+&pinmux {
+ enable_gpio4: pinmux_enable_gpio4 {
+ pinctrl-single,bits = <0x04 0x0 0xff>;
+ };
+
+ enable_gpio16: pinmux_enable_gpio16 {
+ pinctrl-single,bits = <0x10 0x0 0xff>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x060000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "u-boot-env";
+ reg = <0x060000 0x010000>;
+ };
+
+ art: partition@70000 {
+ label = "art";
+ reg = <0x070000 0x010000>;
+ read-only;
+ };
+
+ partition@80000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x080000 0xf80000>;
+ };
+ };
+ };
+};
+
+&usb0 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9531_comfast_cf-e130n-v2.dts b/target/linux/ath79/dts/qca9531_comfast_cf-e130n-v2.dts
new file mode 100644
index 0000000..e14cf77
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_comfast_cf-e130n-v2.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "comfast,cf-e130n-v2", "qca,qca9531";
+ model = "COMFAST CF-E130N v2";
+
+ aliases {
+ serial0 = &uart;
+ led-boot = &led_rssihigh;
+ led-failsafe = &led_rssihigh;
+ led-upgrade = &led_rssihigh;
+ label-mac-device = ð1;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ unused {
+ label = "green:unused";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ rssilow {
+ label = "red:rssilow";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimediumlow {
+ label = "red:rssimediumlow";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimediumhigh {
+ label = "green:rssimediumhigh";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_rssihigh: rssihigh {
+ label = "green:rssihigh";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ art: partition@10000 {
+ label = "art";
+ reg = <0x010000 0x010000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x020000 0x7c0000>;
+ };
+
+ partition@7e0000 {
+ label = "configs";
+ reg = <0x7e0000 0x010000>;
+ read-only;
+ };
+
+ partition@7f0000 {
+ label = "nvram";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x0>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <1>;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9531_comfast_cf-e313ac.dts b/target/linux/ath79/dts/qca9531_comfast_cf-e313ac.dts
new file mode 100644
index 0000000..757a2ea
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_comfast_cf-e313ac.dts
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "comfast,cf-e313ac", "qca,qca9531";
+ model = "COMFAST CF-E313AC";
+
+ aliases {
+ serial0 = &uart;
+ led-boot = &led_rssihigh;
+ led-failsafe = &led_rssihigh;
+ led-upgrade = &led_rssihigh;
+ label-mac-device = ð1;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ rssilow {
+ label = "red:rssilow";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimediumlow {
+ label = "red:rssimediumlow";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimediumhigh {
+ label = "green:rssimediumhigh";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_rssihigh: rssihigh {
+ label = "green:rssihigh";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ art: partition@10000 {
+ label = "art";
+ reg = <0x010000 0x010000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x020000 0x7c0000>;
+ };
+
+ partition@7e0000 {
+ label = "config";
+ reg = <0x7e0000 0x010000>;
+ read-only;
+ };
+
+ partition@7f0000 {
+ label = "nvram";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ mtd-mac-address = <&art 0x1002>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <1>;
+ };
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x0>;
+};
+
+&pcie0 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9531_comfast_cf-e314n-v2.dts b/target/linux/ath79/dts/qca9531_comfast_cf-e314n-v2.dts
new file mode 100644
index 0000000..4738ba5
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_comfast_cf-e314n-v2.dts
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "comfast,cf-e314n-v2", "qca,qca9531";
+ model = "COMFAST CF-E314N v2";
+
+ aliases {
+ serial0 = &uart;
+ led-boot = &led_rssihigh;
+ led-failsafe = &led_rssihigh;
+ led-upgrade = &led_rssihigh;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins &led_rssilow_pin &led_rssimediumhigh_pin &led_rssihigh_pin>;
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ rssilow {
+ label = "red:signal1";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimediumlow {
+ label = "red:signal2";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimediumhigh {
+ label = "green:signal3";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_rssihigh: rssihigh {
+ label = "green:signal4";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&pinmux {
+ led_rssilow_pin: pinmux_rssilow_pin {
+ pinctrl-single,bits = <0x8 0x0 0xff000000>;
+ };
+
+ led_rssimediumhigh_pin: pinmux_rssimediumhigh_pin {
+ pinctrl-single,bits = <0xc 0x0 0x00ff0000>;
+ };
+
+ led_rssihigh_pin: pinmux_rssihigh_pin {
+ pinctrl-single,bits = <0x10 0x0 0x000000ff>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ art: partition@10000 {
+ label = "art";
+ reg = <0x010000 0x010000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x020000 0x7c0000>;
+ };
+
+ partition@7e0000 {
+ label = "configs";
+ reg = <0x7e0000 0x010000>;
+ read-only;
+ };
+
+ partition@7f0000 {
+ label = "nvram";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9531_comfast_cf-e5.dts b/target/linux/ath79/dts/qca9531_comfast_cf-e5.dts
new file mode 100644
index 0000000..5772775
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_comfast_cf-e5.dts
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "comfast,cf-e5", "qca,qca9531";
+ model = "COMFAST CF-E5/E7";
+
+ aliases {
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins &led_wan_pin>;
+
+ wan {
+ label = "blue:wan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "blue:lan";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "blue:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ rssi0 {
+ label = "blue:rssi0";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi1 {
+ label = "blue:rssi1";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi2 {
+ label = "blue:rssi2";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ art: partition@10000 {
+ label = "art";
+ reg = <0x010000 0x010000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x020000 0xfd0000>;
+ };
+
+ partition@ff0000 {
+ label = "art-backup";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
+
+&pinmux {
+ led_wan_pin: pinmux_led_wan_pin {
+ pinctrl-single,bits = <0x4 0x0 0xff>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9531_comfast_cf-e560ac.dts b/target/linux/ath79/dts/qca9531_comfast_cf-e560ac.dts
new file mode 100644
index 0000000..a7ea34e
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_comfast_cf-e560ac.dts
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "comfast,cf-e560ac", "qca,qca9531";
+ model = "COMFAST CF-E560AC";
+
+ aliases {
+ serial0 = &uart;
+ label-mac-device = ð1;
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ lan1 {
+ label = "blue:lan1";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "blue:lan2";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "blue:lan3";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "blue:lan4";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led_system: system {
+ label = "blue:system";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "blue:wan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "blue:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ hw_margin_ms = <1200>;
+ always-running;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ art: partition@10000 {
+ label = "art";
+ reg = <0x010000 0x010000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x020000 0xfc0000>;
+ };
+
+ partition@fe0000 {
+ label = "configs";
+ reg = <0xfe0000 0x010000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ label = "nvram";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <10>;
+};
diff --git a/target/linux/ath79/dts/qca9531_comfast_cf-ew72.dts b/target/linux/ath79/dts/qca9531_comfast_cf-ew72.dts
new file mode 100644
index 0000000..edb6bbe
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_comfast_cf-ew72.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "comfast,cf-ew72", "qca,qca9531";
+ model = "COMFAST CF-EW72";
+
+ aliases {
+ serial0 = &uart;
+ led-boot = &led_wan;
+ led-failsafe = &led_wan;
+ led-upgrade = &led_wan;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ lan {
+ label = "blue:lan";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wan: wan {
+ label = "blue:wan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "blue:wlan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ hw_margin_ms = <1200>;
+ always-running;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "winbond,w25q128", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ art: partition@10000 {
+ label = "art";
+ reg = <0x010000 0x010000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x020000 0xfd0000>;
+ };
+
+ partition@ff0000 {
+ label = "nvram";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <3>;
+};
diff --git a/target/linux/ath79/dts/qca9531_comfast_cf-wr752ac-v1.dts b/target/linux/ath79/dts/qca9531_comfast_cf-wr752ac-v1.dts
new file mode 100644
index 0000000..6ae2e4e
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_comfast_cf-wr752ac-v1.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "comfast,cf-wr752ac-v1", "qca,qca9531";
+ model = "COMFAST CF-WR752AC v1";
+
+ aliases {
+ serial0 = &uart;
+ led-boot = &led_lan;
+ led-failsafe = &led_lan;
+ led-upgrade = &led_lan;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins &pinmux_led_rssihigh &pinmux_led_rssilow>;
+
+ led_lan: lan {
+ label = "blue:lan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ rssihigh {
+ label = "green:rssihigh";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ rssilow {
+ label = "red:rssilow";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ button {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&pinmux {
+ pinmux_led_rssihigh: pinmux_led_rssihigh {
+ pinctrl-single,bits = <0xc 0x0 0xff000000>;
+ };
+
+ pinmux_led_rssilow: pinmux_led_rssilow {
+ pinctrl-single,bits = <0x8 0x0 0xff000000>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ art: partition@10000 {
+ label = "art";
+ reg = <0x010000 0x010000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x020000 0xfd0000>;
+ };
+
+ partition@ff0000 {
+ label = "nvram";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <10>;
+};
diff --git a/target/linux/ath79/dts/qca9531_compex_wpj531-16m.dts b/target/linux/ath79/dts/qca9531_compex_wpj531-16m.dts
new file mode 100644
index 0000000..8982258
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_compex_wpj531-16m.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "compex,wpj531-16m", "qca,qca9531";
+ model = "Compex WPJ531 (16MB flash)";
+
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_sig4;
+ led-failsafe = &led_sig4;
+ led-running = &led_sig4;
+ led-upgrade = &led_sig4;
+ };
+
+ beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_led_eth_pins>;
+
+ sig1 {
+ label = "red:sig1";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ sig2 {
+ label = "yellow:sig2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ sig3 {
+ label = "green:sig3";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led_sig4: sig4 {
+ label = "green:sig4";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinmux {
+ pinmux_led_eth_pins: pinmux_led_eth_pins {
+ pinctrl-single,bits = <0x8 0x2b000000 0xff000000>, <0xc 0x00002d00 0x0000ff00>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x030000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "firmware";
+ reg = <0x030000 0xfc0000>;
+ compatible = "denx,uimage";
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&uboot 0x2e010>;
+};
+
+ð1 {
+ mtd-mac-address = <&uboot 0x2e018>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
+
+&pcie0 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "pci168c,003c";
+ reg = <0x0000 0 0 0 0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9531_dlink_dch-g020-a1.dts b/target/linux/ath79/dts/qca9531_dlink_dch-g020-a1.dts
new file mode 100644
index 0000000..d2fbc09
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_dlink_dch-g020-a1.dts
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dch-g020-a1", "qca,qca9531";
+ model = "D-Link DCH-G020 A1";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sda-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+
+ gpio_ext: gpio_ext@38 {
+ compatible = "nxp,pca9554";
+ reg = <0x38 0x1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ rtc@30 {
+ compatible = "pericom,pt7c43390";
+ reg = <0x30 0x8>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ usb_power {
+ label = "power:usb";
+ gpio-export,name = "d-link:power:usb";
+ gpio-export,output = <0>;
+ gpios = <&gpio_ext 3 GPIO_ACTIVE_LOW>;
+ };
+
+ zwave_power {
+ label = "power:zwave";
+ gpio-export,name = "d-link:power:zwave";
+ gpio-export,output = <0>;
+ gpios = <&gpio_ext 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ status {
+ label = "red:status";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ art: partition@10000 {
+ label = "art";
+ reg = <0x10000 0x10000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "mp";
+ reg = <0x20000 0x10000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "bootarg";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xe70000>;
+ compatible = "denx,uimage";
+ };
+
+ partition@ec0000 {
+ label = "dlink";
+ reg = <0xec0000 0x140000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9531_engenius_ews511ap.dts b/target/linux/ath79/dts/qca9531_engenius_ews511ap.dts
new file mode 100644
index 0000000..6fd28d5
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_engenius_ews511ap.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "engenius,ews511ap", "qca,qca9531";
+ model = "EnGenius EWS511AP";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "amber:power";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ lan1 {
+ label = "blue:lan1";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "blue:lan2";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ /* hw_margin_ms is actually 300s but driver limits it to 60s */
+ hw_margin_ms = <60000>;
+ always-running;
+ };
+};
+
+&wdt {
+ status = "okay";
+};
+
+&rst {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ ubootenv: partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ partition@60000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x060000 0xfa0000>;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-lite.dts b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-lite.dts
new file mode 100644
index 0000000..cf531ed
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-lite.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9531_glinet_gl-ar300m.dtsi"
+
+/ {
+ compatible = "glinet,gl-ar300m-lite", "qca,qca9531";
+ model = "GL.iNet GL-AR300M-Lite";
+};
+
+/delete-node/ &nand_flash;
+
+&nor_firmware {
+ compatible = "denx,uimage";
+ label = "firmware";
+};
+
+// "Disable" unpopulated GMAC1
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
+
+&led_status {
+ label = "red:status";
+};
+
+&led_wlan {
+ label = "green:wlan";
+};
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts
new file mode 100644
index 0000000..e08f66b
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9531_glinet_gl-ar300m.dtsi"
+
+/ {
+ compatible = "glinet,gl-ar300m-nand", "qca,qca9531";
+ model = "GL.iNet GL-AR300M (NAND)";
+};
+
+&nand_kernel {
+ label = "kernel";
+};
+
+&nand_ubi {
+ label = "ubi";
+};
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nor.dts b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nor.dts
new file mode 100644
index 0000000..15cf1c5
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nor.dts
@@ -0,0 +1,11 @@
+#include "qca9531_glinet_gl-ar300m.dtsi"
+
+/ {
+ compatible = "glinet,gl-ar300m-nor", "qca,qca9531";
+ model = "GL.iNet GL-AR300M (NOR)";
+};
+
+&nor_firmware {
+ compatible = "denx,uimage";
+ label = "firmware";
+};
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi
new file mode 100644
index 0000000..d0b0d88
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi
@@ -0,0 +1,160 @@
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ right {
+ label = "button right";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ left {
+ label = "button left";
+ linux,code = <BTN_1>;
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ // Colors for non-Lite versions
+
+ led_status: status {
+ label = "green:status";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wlan: wlan {
+ label = "red:wlan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ i2c: i2c {
+ compatible = "i2c-gpio";
+
+ sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ nor_firmware: partition@50000 {
+ label = "nor_firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+
+ nand_flash: flash@1 {
+ compatible = "spi-nand";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand_kernel: partition@0 {
+ label = "nand_kernel";
+ reg = <0x000000 0x400000>;
+ };
+
+ nand_ubi: partition@400000 {
+ label = "nand_ubi";
+ reg = <0x400000 0x7c00000>;
+ };
+ };
+ };
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m16.dts b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m16.dts
new file mode 100644
index 0000000..0851d41
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m16.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9531_glinet_gl-ar300m.dtsi"
+
+/ {
+ compatible = "glinet,gl-ar300m16", "qca,qca9531";
+ model = "GL.iNet GL-AR300M16";
+};
+
+/delete-node/ &nand_flash;
+
+&nor_firmware {
+ compatible = "denx,uimage";
+ label = "firmware";
+};
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar750.dts b/target/linux/ath79/dts/qca9531_glinet_gl-ar750.dts
new file mode 100644
index 0000000..24dc8aa
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar750.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "glinet,gl-ar750", "qca,qca9531";
+ model = "GL.iNet GL-AR750";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ mode {
+ label = "mode";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "white:power";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "white:wlan2g";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "white:wlan5g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+
+ sda-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ scl-gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+ device_type = "pci";
+ };
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ partition@60000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x060000 0xfa0000>;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-e750.dts b/target/linux/ath79/dts/qca9531_glinet_gl-e750.dts
new file mode 100644
index 0000000..98022d7
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_glinet_gl-e750.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "glinet,gl-e750", "qca,qca9531";
+ model = "GL.iNet GL-E750";
+
+ aliases {
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ switch {
+ label = "switch";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_lte_power {
+ gpio-export,name = "lte_power";
+ gpio-export,output = <1>;
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x10000>;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "kernel";
+ reg = <0x60000 0x400000>;
+ };
+
+ partition@460000 {
+ label = "reserved";
+ reg = <0x460000 0xba0000>;
+ };
+ };
+ };
+
+ flash@1 {
+ compatible = "spi-nand";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ubi";
+ reg = <0x0 0x8000000>;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-x750.dts b/target/linux/ath79/dts/qca9531_glinet_gl-x750.dts
new file mode 100644
index 0000000..c755e00
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_glinet_gl-x750.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "glinet,gl-x750", "qca,qca9531";
+ model = "GL.iNet GL-X750";
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "green:power";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ 4g {
+ label = "green:4g";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ partition@60000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x060000 0xfa0000>;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts b/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts
new file mode 100644
index 0000000..7949624
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "joyit,jt-or750i", "qca,qca9531";
+ model = "Joy-IT JT-OR750i";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_red;
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins &pinmux_led_eth_pins>;
+
+ led_status_green: status_green {
+ label = "green:status";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_status_red: status_red {
+ label = "red:status";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinmux {
+ pinmux_led_eth_pins: pinmux_led_eth_pins {
+ pinctrl-single,bits = \
+ /* GPIO 4: LED_LINK_5 (WAN) */ \
+ <0x04 0x0000002d 0x000000ff>, \
+ /* GPIO 14: LED_LINK_2 (LAN 3) */ \
+ /* GPIO 15: LED_LINK_3 (LAN 2) */ \
+ <0x0c 0x2b2a0000 0xffff0000>, \
+ /* GPIO 16: LED_LINK_4 (LAN 1) */ \
+ <0x10 0x0000002c 0x000000ff>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfa0000>;
+ compatible = "denx,uimage";
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x6>;
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-16m.dts b/target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-16m.dts
new file mode 100644
index 0000000..9b4c0a5
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-16m.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9531_qxwlan_e600g.dtsi"
+
+/ {
+ model = "Qxwlan E600G v2 16M";
+ compatible = "qxwlan,e600g-v2-16m", "qca,qca9531";
+};
+
+&leds {
+ wlan {
+ label = "blue:wlan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+};
+
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0xf90000>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-8m.dts b/target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-8m.dts
new file mode 100644
index 0000000..7822ec6
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-8m.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9531_qxwlan_e600g.dtsi"
+
+/ {
+ model = "Qxwlan E600G v2 8M";
+ compatible = "qxwlan,e600g-v2-8m", "qca,qca9531";
+};
+
+&leds {
+ wlan {
+ label = "blue:wlan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+};
+
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0x790000>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9531_qxwlan_e600g.dtsi b/target/linux/ath79/dts/qca9531_qxwlan_e600g.dtsi
new file mode 100644
index 0000000..7c6ed9f
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_qxwlan_e600g.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ keys: keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "blue:system";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ pridata: partition@50000 {
+ label = "pri-data";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ art: partition@60000 {
+ label = "art";
+ reg = <0x060000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&pridata 0x400>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ mtd-mac-address = <&pridata 0x400>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-16m.dts b/target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-16m.dts
new file mode 100644
index 0000000..4be2498
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-16m.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9531_qxwlan_e600g.dtsi"
+
+/ {
+ model = "Qxwlan E600GAC v2 16M";
+ compatible = "qxwlan,e600gac-v2-16m", "qca,qca9531";
+};
+
+&keys {
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+};
+
+&leds {
+ wlan2g {
+ label = "orange:wlan2g";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ control1 {
+ label = "green:control";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ control2 {
+ label = "red:control";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ control3 {
+ label = "blue:control";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0xf90000>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-8m.dts b/target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-8m.dts
new file mode 100644
index 0000000..826c46b
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-8m.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9531_qxwlan_e600g.dtsi"
+
+/ {
+ model = "Qxwlan E600GAC v2 8M";
+ compatible = "qxwlan,e600gac-v2-8m", "qca,qca9531";
+};
+
+&keys {
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+};
+
+&leds {
+ wlan2g {
+ label = "orange:wlan2g";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ control1 {
+ label = "green:control";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ control2 {
+ label = "red:control";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ control3 {
+ label = "blue:control";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0x790000>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9531_telco_t1.dts b/target/linux/ath79/dts/qca9531_telco_t1.dts
new file mode 100644
index 0000000..eaaf4f1
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_telco_t1.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "telco,t1", "qca,qca9531";
+ model = "Telco T1";
+
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_rssi0;
+ led-failsafe = &led_rssi0;
+ led-running = &led_rssi0;
+ led-upgrade = &led_rssi0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins &pinmux_led_wan_pin>;
+
+ wan {
+ label = "blue:wan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "blue:lan";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "blue:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_rssi0: rssi0 {
+ label = "blue:rssi0";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi1 {
+ label = "blue:rssi1";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi2 {
+ label = "blue:rssi2";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ art: partition@10000 {
+ label = "art";
+ reg = <0x010000 0x010000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x020000 0xfd0000>;
+ };
+
+ partition@ff0000 {
+ label = "art-backup";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
+
+&pinmux {
+ pinmux_led_wan_pin: led_wan_pin {
+ pinctrl-single,bits = <0x4 0x0 0xff>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9531_tplink_archer-d50-v1.dts b/target/linux/ath79/dts/qca9531_tplink_archer-d50-v1.dts
new file mode 100644
index 0000000..9a39001
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_tplink_archer-d50-v1.dts
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,archer-d50-v1", "qca,qca9531";
+ model = "TP-Link Archer D50 v1";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = &wmac;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan2g {
+ label = "white:wlan2g";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g {
+ label = "white:wlan5g";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ qss {
+ label = "white:qss";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "white:wan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "white:lan";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "white:usb";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+
+ internet {
+ label = "white:internet";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_system: system {
+ label = "white:system";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ rfkill {
+ label = "RFKILL button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x7a0000>;
+ };
+
+ partition@7c0000 {
+ label = "config";
+ reg = <0x7c0000 0x010000>;
+ read-only;
+ };
+
+ romfile: partition@7d0000 {
+ label = "romfile";
+ reg = <0x7d0000 0x010000>;
+ read-only;
+ };
+
+ partition@7e0000 {
+ label = "rom";
+ reg = <0x7e0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&romfile 0xf100>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ mtd-mac-address = <&romfile 0xf100>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&romfile 0xf100>;
+};
+
+&pcie0 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "pci168c,003c";
+ reg = <0x0000 0 0 0 0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9531_tplink_tl-mr3420-v3.dts b/target/linux/ath79/dts/qca9531_tplink_tl-mr3420-v3.dts
new file mode 100644
index 0000000..0e2c158
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_tplink_tl-mr3420-v3.dts
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-mr3420-v3", "qca,qca9531";
+ model = "TP-Link TL-MR3420 v3";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = &wmac;
+
+ };
+
+ led_spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+
+ led_gpio: led_gpio@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <1>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_shift_register_oe {
+ gpio-export,name = "tp-link:oe:sr";
+ gpio-export,output = <0>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ gpio_shift_register_reset {
+ gpio-export,name = "tp-link:reset:sr";
+ gpio-export,output = <1>;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ lan4 {
+ label = "green:lan4";
+ gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "green:lan3";
+ gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "green:lan2";
+ gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_fail {
+ label = "orange:wan";
+ gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ usb {
+ label = "green:usb";
+ gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+
+ qss {
+ label = "green:qss";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ rfkill {
+ label = "RF kill button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x3d0000>;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts b/target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts
new file mode 100644
index 0000000..82a73d3
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-mr6400-v1", "qca,qca9531";
+ model = "TP-Link TL-MR6400 v1";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ label-mac-device = &wmac;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* D12 */
+ wan {
+ label = "white:wan";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* D11 */
+ 4g {
+ label = "white:4g";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* D5 */
+ wps {
+ label = "white:wps";
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* D3 */
+ wlan {
+ label = "white:wlan";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ /* D2 */
+ led_power: power {
+ label = "white:power";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* D4 */
+ lan {
+ label = "white:lan";
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ /* SW2 */
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ /* SW3 */
+ rfkill {
+ label = "RF kill button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_usb_power {
+ gpio-export,name = "tp-link:power:lte";
+ gpio-export,output = <0>;
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x7d0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts b/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts
new file mode 100644
index 0000000..227f57b
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x_tplink_tl-wr810n.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr810n-v1", "qca,qca9531";
+ model = "TP-Link TL-WR810N v1";
+
+ reg_usb_vbus: reg_usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+};
+
+&usb0 {
+ status = "okay";
+
+ vbus-supply = <®_usb_vbus>;
+};
+
+&usb_phy {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9531_tplink_tl-wr902ac-v1.dts b/target/linux/ath79/dts/qca9531_tplink_tl-wr902ac-v1.dts
new file mode 100644
index 0000000..69445df
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_tplink_tl-wr902ac-v1.dts
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wr902ac-v1", "qca,qca9531";
+ model = "TP-Link TL-WR902AC v1";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ label-mac-device = &wmac;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ internet {
+ label = "green:internet";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ usb {
+ label = "green:usb";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+
+ wps {
+ label = "green:wps";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ sw1 {
+ label = "Mode switch 1";
+ linux,input-type = <EV_SW>;
+ linux,code = <BTN_0>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ sw2 {
+ label = "Mode switch 2";
+ linux,input-type = <EV_SW>;
+ linux,code = <BTN_1>;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_usb_power {
+ gpio-export,name = "tp-link:power:usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x730000>;
+ };
+
+ info: partition@750000 {
+ label = "info";
+ reg = <0x750000 0x010000>;
+ read-only;
+ };
+
+ partition@760000 {
+ label = "tplink";
+ reg = <0x760000 0x090000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&info 0x8>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
+
+&pcie0 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "pci168c,0050";
+ reg = <0x0000 0 0 0 0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9531_wallys_dr531.dts b/target/linux/ath79/dts/qca9531_wallys_dr531.dts
new file mode 100644
index 0000000..abf821b
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_wallys_dr531.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Wallys DR531";
+ compatible = "wallys,dr531", "qca,qca9531";
+
+ aliases {
+ label-mac-device = ð1;
+ led-boot = &led_sig4;
+ led-failsafe = &led_sig4;
+ led-upgrade = &led_sig4;
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ buzzer {
+ gpio-export,name = "buzzer";
+ gpio-export,output = <0>;
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_sig4: sig4 {
+ label = "green:sig4";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ sig1 {
+ label = "green:sig1";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ sig2 {
+ label = "green:sig2";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ sig3 {
+ label = "green:sig3";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+ mtd-mac-address = <&env 0xf818>;
+};
+
+ð1 {
+ /* Workaround: keep the Ethernet interfaces order/mapping correct
+ * (GMAC0 -> eth0, GMAC1 -> eth1, same as in old ar71xx target) */
+ compatible = "qca,qca9530-eth", "syscon", "simple-mfd";
+
+ mtd-mac-address = <&env 0xf810>;
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x030000>;
+ read-only;
+ };
+
+ env: partition@30000 {
+ label = "u-boot-env";
+ reg = <0x030000 0x010000>;
+ };
+
+ partition@40000 {
+ label = "partition-table";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0x7a0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9531_yuncore_a770.dts b/target/linux/ath79/dts/qca9531_yuncore_a770.dts
new file mode 100644
index 0000000..c58b0c4
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_yuncore_a770.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "YunCore A770";
+ compatible = "yuncore,a770", "qca,qca9531";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status: status {
+ label = "green:status";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "red:wlan2g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x6>;
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9533_comfast_cf-e110n-v2.dts b/target/linux/ath79/dts/qca9533_comfast_cf-e110n-v2.dts
new file mode 100644
index 0000000..8deeea4
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_comfast_cf-e110n-v2.dts
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "comfast,cf-e110n-v2", "qca,qca9533";
+ model = "COMFAST CF-E110N v2";
+
+ aliases {
+ serial0 = &uart;
+ led-boot = &led_rssihigh;
+ led-failsafe = &led_rssihigh;
+ led-upgrade = &led_rssihigh;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins &led_rssilow_pin &led_rssimediumhigh_pin &led_rssihigh_pin>;
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ rssilow {
+ label = "red:rssilow";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimediumlow {
+ label = "red:rssimediumlow";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimediumhigh {
+ label = "green:rssimediumhigh";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_rssihigh: rssihigh {
+ label = "green:rssihigh";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&pinmux {
+ led_rssilow_pin: pinmux_rssilow_pin {
+ pinctrl-single,bits = <0x8 0x0 0xff000000>;
+ };
+
+ led_rssimediumhigh_pin: pinmux_rssimediumhigh_pin {
+ pinctrl-single,bits = <0xc 0x0 0x00ff0000>;
+ };
+
+ led_rssihigh_pin: pinmux_rssihigh_pin {
+ pinctrl-single,bits = <0x10 0x0 0x000000ff>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "winbond,w25q128", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ art: partition@10000 {
+ label = "art";
+ reg = <0x010000 0x010000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x020000 0xfd0000>;
+ };
+
+ partition@ff0000 {
+ label = "nvram";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x1002>;
+
+ gmac-config {
+ device = <&gmac>;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x6>;
+};
diff --git a/target/linux/ath79/dts/qca9533_dlink_dap-1330-a1.dts b/target/linux/ath79/dts/qca9533_dlink_dap-1330-a1.dts
new file mode 100644
index 0000000..3a1d4f9
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_dlink_dap-1330-a1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_dlink_dap-13xx.dtsi"
+
+/ {
+ compatible = "dlink,dap-1330-a1", "qca,qca9533";
+ model = "D-Link DAP-1330 A1";
+};
diff --git a/target/linux/ath79/dts/qca9533_dlink_dap-1365-a1.dts b/target/linux/ath79/dts/qca9533_dlink_dap-1365-a1.dts
new file mode 100644
index 0000000..5c118e7
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_dlink_dap-1365-a1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_dlink_dap-13xx.dtsi"
+
+/ {
+ compatible = "dlink,dap-1365-a1", "qca,qca9533";
+ model = "D-Link DAP-1365 A1";
+};
diff --git a/target/linux/ath79/dts/qca9533_dlink_dap-13xx.dtsi b/target/linux/ath79/dts/qca9533_dlink_dap-13xx.dtsi
new file mode 100644
index 0000000..f1eef86
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_dlink_dap-13xx.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_status;
+ led-running = &led_power;
+ led-upgrade = &led_status;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status: status {
+ label = "red:status";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ rssilow {
+ label = "red:rssilow";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimediumlow {
+ label = "green:rssimediumlow";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimediumhigh {
+ label = "green:rssimediumhigh";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ rssihigh {
+ label = "green:rssihigh";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ art: partition@10000 {
+ label = "art";
+ reg = <0x10000 0x10000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "mp";
+ reg = <0x20000 0x10000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x40000 0x7c0000>;
+ compatible = "denx,uimage";
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9533_dlink_dap-2230-a1.dts b/target/linux/ath79/dts/qca9533_dlink_dap-2230-a1.dts
new file mode 100644
index 0000000..3717a35
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_dlink_dap-2230-a1.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x_dlink_dap-2xxx.dtsi"
+
+/ {
+ compatible = "dlink,dap-2230-a1", "qca,qca9533";
+ model = "D-Link DAP-2230 A1";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+};
+
+&partitions {
+ partition@70000 {
+ label = "firmware";
+ reg = <0x70000 0xee0000>;
+ compatible = "wrg";
+ };
+
+ partition@f50000 {
+ label = "dlink";
+ reg = <0xf50000 0xa0000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9533_dlink_dap-3320-a1.dts b/target/linux/ath79/dts/qca9533_dlink_dap-3320-a1.dts
new file mode 100644
index 0000000..c186a7e
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_dlink_dap-3320-a1.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x_dlink_dap-2xxx.dtsi"
+
+/ {
+ compatible = "dlink,dap-3320-a1", "qca,qca9533";
+ model = "D-Link DAP-3320 A1";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+};
+
+&partitions {
+ partition@70000 {
+ label = "firmware";
+ reg = <0x70000 0xef0000>;
+ compatible = "wrg";
+ };
+
+ partition@f60000 {
+ label = "dlink";
+ reg = <0xf60000 0x90000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-16m.dtsi b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-16m.dtsi
new file mode 100644
index 0000000..f0473c7
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-16m.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ serial0 = &uart;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "RouterBoot";
+ reg = <0x0 0x20000>;
+ read-only;
+ compatible = "mikrotik,routerboot-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader1";
+ reg = <0x0 0x0>;
+ read-only;
+ };
+
+ hard_config: hard_config {
+ read-only;
+ };
+
+ bios {
+ size = <0x1000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "bootloader2";
+ reg = <0x10000 0x0>;
+ read-only;
+ };
+
+ soft_config {
+ label = "soft_config";
+ };
+ };
+
+ partition@20000 {
+ compatible = "mikrotik,minor";
+ label = "firmware";
+ reg = <0x020000 0xfe0000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ qca,no-eeprom;
+};
diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-952ui-5ac2nd.dts b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-952ui-5ac2nd.dts
new file mode 100644
index 0000000..b32d38a
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-952ui-5ac2nd.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_mikrotik_routerboard-95x.dtsi"
+
+/ {
+ compatible = "mikrotik,routerboard-952ui-5ac2nd", "qca,qca9533";
+ model = "MikroTik RouterBOARD 952Ui-5ac2nD (hAP ac lite)";
+};
+
+&pcie0 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+ };
+};
+
diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-95x.dtsi b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-95x.dtsi
new file mode 100644
index 0000000..79c9f44
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-95x.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_mikrotik_routerboard-16m.dtsi"
+
+/ {
+ aliases {
+ led-boot = &led_user;
+ led-failsafe = &led_user;
+ led-running = &led_user;
+ led-upgrade = &led_user;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_user: user {
+ label = "green:user";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ port1 {
+ label = "green:port1";
+ gpios = <&gpio_ext 0 GPIO_ACTIVE_LOW>;
+ };
+
+ port2 {
+ label = "green:port2";
+ gpios = <&gpio_ext 1 GPIO_ACTIVE_LOW>;
+ };
+
+ port3 {
+ label = "green:port3";
+ gpios = <&gpio_ext 2 GPIO_ACTIVE_LOW>;
+ };
+
+ port4 {
+ label = "green:port4";
+ gpios = <&gpio_ext 3 GPIO_ACTIVE_LOW>;
+ };
+
+ port5 {
+ label = "green:port5";
+ gpios = <&gpio_ext 4 GPIO_ACTIVE_LOW>;
+ };
+
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ usb_power {
+ gpio-export,name = "usb-power";
+ gpio-export,output = <1>;
+ gpios = <&gpio_ext 5 GPIO_ACTIVE_LOW>;
+ };
+
+ enable_poe_port5 {
+ gpio-export,name = "enable-poe:port5";
+ gpio-export,output = <0>;
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pin_spi_cs1>;
+
+ gpio_ext: gpio_ext@1 {
+ compatible = "fairchild,74hc595";
+ reg = <1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <1>;
+ spi-max-frequency = <25000000>;
+ };
+};
+
+
+&pinmux {
+ pin_spi_cs1: pinmux_spi_cs1 {
+ pinctrl-single,bits = <0x8 0x0a000000 0xff000000>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-lhg-2nd.dts b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-lhg-2nd.dts
new file mode 100644
index 0000000..1866b7d
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-lhg-2nd.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_mikrotik_routerboard-lhg-hb.dtsi"
+
+/ {
+ compatible = "mikrotik,routerboard-lhg-2nd", "qca,qca9533";
+ model = "MikroTik RouterBOARD LHG 2nD";
+};
diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-lhg-hb.dtsi b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-lhg-hb.dtsi
new file mode 100644
index 0000000..a453650
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-lhg-hb.dtsi
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_mikrotik_routerboard-16m.dtsi"
+
+/ {
+ compatible = "mikrotik,routerboard-lhg-hb", "qca,qca9533";
+ model = "MikroTik RouterBOARD LHG-HB platform";
+
+ aliases {
+ led-boot = &led_user;
+ led-failsafe = &led_user;
+ led-upgrade = &led_user;
+ led-running = &led_user;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_wan_pin>;
+
+ power {
+ label = "blue:power";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led_user: user {
+ label = "green:user";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ rssilow {
+ label = "green:rssilow";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimediumlow {
+ label = "green:rssimediumlow";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimediumhigh {
+ label = "green:rssimediumhigh";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ /* The rssihigh LED GPIO 16 is shared with the reset button, so it remains
+ unregistered here to avoid conflict.
+
+ rssihigh {
+ label = "green:rssihigh";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ */
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <1>;
+ };
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
+
+&pinmux {
+ led_wan_pin: pinmux_led_wan_pin {
+ pinctrl-single,bits = <0x4 0x0 0xff>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-map-2nd.dts b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-map-2nd.dts
new file mode 100644
index 0000000..25971e6
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-map-2nd.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_mikrotik_routerboard-16m.dtsi"
+
+/ {
+ compatible = "mikrotik,routerboard-map-2nd", "qca,qca9533";
+ model = "MikroTik RouterBOARD mAP-2nD (mAP)";
+
+ aliases {
+ led-boot = &led_user;
+ led-failsafe = &led_user;
+ led-running = &led_user;
+ led-upgrade = &led_user;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "green:power";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ eth_1 {
+ label = "green:eth_1";
+ gpios = <&gpio_ext 0 GPIO_ACTIVE_LOW>;
+ };
+
+ eth_2 {
+ label = "green:eth_2";
+ gpios = <&gpio_ext 1 GPIO_ACTIVE_LOW>;
+ };
+
+ poe_out {
+ label = "red:poe_out";
+ gpios = <&gpio_ext 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led_user: user {
+ label = "green:user";
+ gpios = <&gpio_ext 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio_ext 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ ap_cap {
+ label = "green:ap_cap";
+ gpios = <&gpio_ext 6 GPIO_ACTIVE_LOW>;
+ };
+
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ usb_power {
+ gpio-export,name = "usb-power";
+ gpio-export,output = <1>;
+ gpios = <&gpio_ext 5 GPIO_ACTIVE_LOW>;
+ };
+
+ enable_poe_port5 {
+ gpio-export,name = "enable-poe";
+ gpio-export,output = <0>;
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pin_spi_cs1>;
+
+ gpio_ext: gpio_ext@1 {
+ compatible = "fairchild,74hc595";
+ reg = <1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <1>;
+ spi-max-frequency = <25000000>;
+ };
+};
+
+
+&pinmux {
+ pin_spi_cs1: pinmux_spi_cs1 {
+ pinctrl-single,bits = <0x8 0x0a000000 0xff000000>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <1>;
+ };
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-mapl-2nd.dts b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-mapl-2nd.dts
new file mode 100644
index 0000000..e2442f0
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-mapl-2nd.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_mikrotik_routerboard-16m.dtsi"
+
+/ {
+ compatible = "mikrotik,routerboard-mapl-2nd", "qca,qca9533";
+ model = "MikroTik RouterBOARD mAPL-2nD (mAP lite)";
+
+ aliases {
+ led-boot = &led_user;
+ led-failsafe = &led_user;
+ led-running = &led_user;
+ led-upgrade = &led_user;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_power_pin &led_lan_pin>;
+
+ power {
+ label = "green:power";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_user: user {
+ label = "green:user";
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <1>;
+ };
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
+
+&pinmux {
+ led_lan_pin: pinmux_led_lan_pin {
+ pinctrl-single,bits = <0x4 0x0 0xff>;
+ };
+
+ led_power_pin: pinmux_led_power_pin {
+ pinctrl-single,bits = <0x10 0x0 0xff00>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-wapr-2nd.dts b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-wapr-2nd.dts
new file mode 100644
index 0000000..459fc04
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-wapr-2nd.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_mikrotik_routerboard-16m.dtsi"
+
+/ {
+ compatible = "mikrotik,routerboard-wapr-2nd", "qca,qca9533";
+ model = "MikroTik RouterBOARD wAPR-2nD (wAP R)";
+
+ aliases {
+ led-boot = &led_rssilow;
+ led-failsafe = &led_rssilow;
+ led-upgrade = &led_rssilow;
+ led-running = &led_rssilow;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+
+ led_rssilow: rssilow {
+ label = "green:rssilow";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimedium {
+ label = "green:rssimedium";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ rssihigh {
+ label = "green:rssihigh";
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ minipcie {
+ gpio-export,name = "minipcie";
+ gpio-export,output = <1>;
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <1>;
+ };
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9533_openmesh_om2p-hs-v4.dts b/target/linux/ath79/dts/qca9533_openmesh_om2p-hs-v4.dts
new file mode 100644
index 0000000..218117f
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_openmesh_om2p-hs-v4.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_openmesh_om2p-v4.dtsi"
+
+/ {
+ compatible = "openmesh,om2p-hs-v4", "qca,qca9533";
+ model = "OpenMesh OM2P-HS v4";
+};
diff --git a/target/linux/ath79/dts/qca9533_openmesh_om2p-v4.dts b/target/linux/ath79/dts/qca9533_openmesh_om2p-v4.dts
new file mode 100644
index 0000000..b738afa
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_openmesh_om2p-v4.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_openmesh_om2p-v4.dtsi"
+
+/ {
+ compatible = "openmesh,om2p-v4", "qca,qca9533";
+ model = "OpenMesh OM2P v4";
+};
diff --git a/target/linux/ath79/dts/qca9533_openmesh_om2p-v4.dtsi b/target/linux/ath79/dts/qca9533_openmesh_om2p-v4.dtsi
new file mode 100644
index 0000000..53eb08b
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_openmesh_om2p-v4.dtsi
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ /delete-property/ bootargs;
+ };
+
+ aliases {
+ led-boot = &led_power_blue;
+ led-failsafe = &led_power_blue;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_blue;
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_blue: power_blue {
+ label = "blue:power";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wifi_green {
+ label = "green:wifi";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi_yellow {
+ label = "yellow:wifi";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi_red {
+ label = "red:wifi";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_blue {
+ label = "blue:wan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ lan_blue {
+ label = "blue:lan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ /* hw_margin_ms is actually 300s but driver limits it to 60s */
+ hw_margin_ms = <60000>;
+ always-running;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ /* partitions are passed via bootloader */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x040000>;
+ };
+
+ partition@80000 {
+ label = "custom";
+ reg = <0x080000 0x140000>;
+ read-only;
+ };
+
+ partition@1c0000 {
+ label = "inactive";
+ reg = <0x1c0000 0x700000>;
+ };
+
+ partition@8c0000 {
+ label = "inactive2";
+ reg = <0x8c0000 0x700000>;
+ };
+
+ art: partition@fc0000 {
+ label = "ART";
+ reg = <0xfc0000 0x040000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ /* Workaround: keep the Ethernet interfaces order/mapping correct
+ * (GMAC0 -> eth0, GMAC1 -> eth1, same as in old ar71xx target)
+ */
+ compatible = "qca,qca9530-eth", "syscon", "simple-mfd";
+
+ mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <2>;
+};
diff --git a/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dts b/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dts
new file mode 100644
index 0000000..8de8929
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_plasmacloud_pa300.dtsi"
+
+/ {
+ compatible = "plasmacloud,pa300", "qca,qca9533";
+ model = "Plasma Cloud PA300";
+};
diff --git a/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dtsi b/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dtsi
new file mode 100644
index 0000000..c506c84
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ /delete-property/ bootargs;
+ };
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_green;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_green;
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status_red {
+ label = "red:status";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_green: status_green {
+ label = "green:status";
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ status_blue {
+ label = "blue:status";
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ /* hw_margin_ms is actually 300s but driver limits it to 60s */
+ hw_margin_ms = <60000>;
+ always-running;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ /* partitions are passed via bootloader */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x040000>;
+ };
+
+ partition@80000 {
+ label = "custom";
+ reg = <0x080000 0x140000>;
+ read-only;
+ };
+
+ partition@1c0000 {
+ label = "inactive";
+ reg = <0x1c0000 0x700000>;
+ };
+
+ partition@8c0000 {
+ label = "inactive2";
+ reg = <0x8c0000 0x700000>;
+ };
+
+ art: partition@fc0000 {
+ label = "ART";
+ reg = <0xfc0000 0x040000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ /* Workaround: keep the Ethernet interfaces order/mapping correct
+ * (GMAC0 -> eth0, GMAC1 -> eth1, same as in old ar71xx target)
+ */
+ compatible = "qca,qca9530-eth", "syscon", "simple-mfd";
+
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <2>;
+};
diff --git a/target/linux/ath79/dts/qca9533_plasmacloud_pa300e.dts b/target/linux/ath79/dts/qca9533_plasmacloud_pa300e.dts
new file mode 100644
index 0000000..1527a79
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_plasmacloud_pa300e.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_plasmacloud_pa300.dtsi"
+
+/ {
+ compatible = "plasmacloud,pa300e", "qca,qca9533";
+ model = "Plasma Cloud PA300E";
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_cpe210-v2.dts b/target/linux/ath79/dts/qca9533_tplink_cpe210-v2.dts
new file mode 100644
index 0000000..57d4d94
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_cpe210-v2.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_tplink_cpe210.dtsi"
+
+/ {
+ compatible = "tplink,cpe210-v2", "qca,qca9533";
+ model = "TP-Link CPE210 v2";
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_cpe210-v3.dts b/target/linux/ath79/dts/qca9533_tplink_cpe210-v3.dts
new file mode 100644
index 0000000..2500e30
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_cpe210-v3.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_tplink_cpe210.dtsi"
+
+/ {
+ compatible = "tplink,cpe210-v3", "qca,qca9533";
+ model = "TP-Link CPE210 v3";
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi b/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi
new file mode 100644
index 0000000..3295776
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_tplink_cpexxx.dtsi"
+
+&leds {
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts b/target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts
new file mode 100644
index 0000000..1d80989
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_tplink_cpexxx.dtsi"
+
+/ {
+ compatible = "tplink,cpe220-v3", "qca,qca9533";
+ model = "TP-Link CPE220 v3";
+};
+
+&leds {
+ lan0 {
+ label = "green:lan0";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+};
+
+ð1 {
+ mtd-mac-address = <&info 0x8>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <0>;
+ switch-only-mode = <1>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi b/target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi
new file mode 100644
index 0000000..d5eeec1
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_link4;
+ led-failsafe = &led_link4;
+ led-running = &led_link4;
+ led-upgrade = &led_link4;
+ label-mac-device = &wmac;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ link1 {
+ label = "green:link1";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ link2 {
+ label = "green:link2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ link3 {
+ label = "green:link3";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led_link4: link4 {
+ label = "green:link4";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "partition-table";
+ reg = <0x020000 0x010000>;
+ read-only;
+ };
+
+ info: partition@30000 {
+ label = "info";
+ reg = <0x030000 0x010000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x040000 0x780000>;
+ compatible = "tplink,firmware";
+ };
+
+ config: partition@7c0000 {
+ label = "config";
+ reg = <0x7c0000 0x030000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&info 0x8>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wa801nd-v3.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wa801nd-v3.dts
new file mode 100644
index 0000000..21d2087
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wa801nd-v3.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_tplink_tl-wa801nd.dtsi"
+
+/ {
+ compatible = "tplink,tl-wa801nd-v3", "qca,qca9533";
+ model = "TP-Link TL-WA801ND v3";
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wa801nd-v4.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wa801nd-v4.dts
new file mode 100644
index 0000000..76188bc
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wa801nd-v4.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_tplink_tl-wa801nd.dtsi"
+
+/ {
+ compatible = "tplink,tl-wa801nd-v4", "qca,qca9533";
+ model = "TP-Link TL-WA801ND v4";
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wa801nd.dtsi b/target/linux/ath79/dts/qca9533_tplink_tl-wa801nd.dtsi
new file mode 100644
index 0000000..6033acd
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wa801nd.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = &wmac;
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ security_red {
+ label = "red:security";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ security_green {
+ label = "green:security";
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x3d0000>;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wa850re-v2.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wa850re-v2.dts
new file mode 100644
index 0000000..45fe9e8
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wa850re-v2.dts
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wa850re-v2", "qca,qca9533";
+ model = "TP-Link TL-WA850RE v2";
+
+ aliases {
+ led-boot = &led_re;
+ led-failsafe = &led_re;
+ led-running = &led_re;
+ led-upgrade = &led_re;
+ label-mac-device = &wmac;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ lan {
+ label = "blue:lan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_re: re {
+ label = "blue:re";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ signal1 {
+ label = "blue:signal1";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ signal2 {
+ label = "blue:signal2";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ signal3 {
+ label = "blue:signal3";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ signal4 {
+ label = "blue:signal4";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led_signal5: signal5 {
+ label = "blue:signal5";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "blue:wlan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio {
+ led_enable {
+ gpio-hog;
+ gpios = <15 GPIO_ACTIVE_HIGH>;
+ line-name = "tp-link:power:led";
+ output-high;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0x390000>;
+ compatible = "tplink,firmware";
+ };
+
+ partition@3b0000 {
+ label = "partition-table";
+ reg = <0x3b0000 0x010000>;
+ read-only;
+ };
+
+ info: partition@3c0000 {
+ label = "info";
+ reg = <0x3c0000 0x010000>;
+ read-only;
+ };
+
+ partition@3d0000 {
+ label = "config";
+ reg = <0x3d0000 0x020000>;
+ read-only;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&info 0x8>;
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr802n-v1.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wr802n-v1.dts
new file mode 100644
index 0000000..71f76bd
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr802n-v1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_tplink_tl-wr802n.dtsi"
+
+/ {
+ model = "TP-Link TL-WR802N v1";
+ compatible = "tplink,tl-wr802n-v1", "qca,qca9533";
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr802n-v2.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wr802n-v2.dts
new file mode 100644
index 0000000..b3eafbe
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr802n-v2.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_tplink_tl-wr802n.dtsi"
+
+/ {
+ model = "TP-Link TL-WR802N v2";
+ compatible = "tplink,tl-wr802n-v2", "qca,qca9533";
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr802n.dtsi b/target/linux/ath79/dts/qca9533_tplink_tl-wr802n.dtsi
new file mode 100644
index 0000000..fb03419
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr802n.dtsi
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = &wmac;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0x3d0000>;
+ compatible = "tplink,firmware";
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr810n-v2.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wr810n-v2.dts
new file mode 100644
index 0000000..1b57e48
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr810n-v2.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x_tplink_tl-wr810n.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr810n-v2", "qca,qca9533";
+ model = "TP-Link TL-WR810N v2";
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr841-v10.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wr841-v10.dts
new file mode 100644
index 0000000..4566831
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr841-v10.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_tplink_tl-wr841.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr841-v10", "qca,qca9533";
+ model = "TP-Link TL-WR841N/ND v10";
+
+ aliases {
+ led-boot = &led_qss;
+ led-failsafe = &led_qss;
+ led-running = &led_qss;
+ led-upgrade = &led_qss;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr841-v11.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wr841-v11.dts
new file mode 100644
index 0000000..f888480
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr841-v11.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_tplink_tl-wr841-v11.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr841-v11", "qca,qca9533";
+ model = "TP-Link TL-WR841N/ND v11";
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr841-v11.dtsi b/target/linux/ath79/dts/qca9533_tplink_tl-wr841-v11.dtsi
new file mode 100644
index 0000000..027ed82
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr841-v11.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_tplink_tl-wr841.dtsi"
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+};
+
+&leds {
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_orange {
+ label = "orange:wan";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr841-v12.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wr841-v12.dts
new file mode 100644
index 0000000..c959265
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr841-v12.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_tplink_tl-wr841-v11.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr841-v12", "qca,qca9533";
+ model = "TP-Link TL-WR841N/ND v12";
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr841-v9.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wr841-v9.dts
new file mode 100644
index 0000000..0c2ff7a
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr841-v9.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_tplink_tl-wr841.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr841-v9", "qca,qca9533";
+ model = "TP-Link TL-WR841N/ND v9";
+
+ aliases {
+ led-boot = &led_qss;
+ led-failsafe = &led_qss;
+ led-running = &led_qss;
+ led-upgrade = &led_qss;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr841.dtsi b/target/linux/ath79/dts/qca9533_tplink_tl-wr841.dtsi
new file mode 100644
index 0000000..4166686
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr841.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = &wmac;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ wifi {
+ label = "green:wlan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_qss: qss {
+ label = "green:qss";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "green:lan2";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "green:lan3";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "green:lan4";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ rfkill {
+ label = "RFKILL button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x3d0000>;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr842n-v3.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wr842n-v3.dts
new file mode 100644
index 0000000..db99f70
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr842n-v3.dts
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wr842n-v3", "qca,qca9533";
+ model = "TP-Link TL-WR842N v3";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ label-mac-device = ð1;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wifi {
+ label = "green:wlan";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ qss {
+ label = "green:qss";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_green {
+ label = "green:wan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_red {
+ label = "red:wan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "green:lan2";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "green:lan3";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "green:lan4";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "green:usb";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ rfkill {
+ label = "RFKILL button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0xfd0000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/qca9533_ubnt_aircube-isp.dts b/target/linux/ath79/dts/qca9533_ubnt_aircube-isp.dts
new file mode 100644
index 0000000..f7910b3
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_ubnt_aircube-isp.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ubnt,aircube-isp", "qca,qca9533";
+ model = "Ubiquiti airCube ISP";
+
+ aliases {
+ label-mac-device = &wmac;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xf60000>;
+ };
+
+ partition@fb0000 {
+ label = "cfg";
+ reg = <0xfb0000 0x040000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x6>;
+
+ gmac-config {
+ device = <&gmac>;
+ };
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9533_yuncore_a930.dts b/target/linux/ath79/dts/qca9533_yuncore_a930.dts
new file mode 100644
index 0000000..f83dca0
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_yuncore_a930.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "yuncore,a930", "qca,qca9533";
+ model = "YunCore A930";
+
+ aliases {
+ label-mac-device = ð1;
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wlan2g {
+ label = "blue:wlan2g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca953x.dtsi b/target/linux/ath79/dts/qca953x.dtsi
new file mode 100644
index 0000000..801438b
--- /dev/null
+++ b/target/linux/ath79/dts/qca953x.dtsi
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ath79.dtsi"
+
+/ {
+ compatible = "qca,qca9530";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips24Kc";
+ clocks = <&pll ATH79_CLK_CPU>;
+ reg = <0>;
+ };
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <25000000>;
+ };
+
+ ahb {
+ apb {
+ ddr_ctrl: memory-controller@18000000 {
+ compatible = "qca,qca9530-ddr-controller",
+ "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x128>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ uart: uart@18020000 {
+ compatible = "ns16550a";
+ reg = <0x18020000 0x20>;
+
+ interrupts = <3>;
+
+ clocks = <&pll ATH79_CLK_REF>;
+ clock-names = "uart";
+
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ no-loopback-test;
+ };
+
+ usb_phy: usb-phy@18030000 {
+ compatible = "qca,ar7200-usb-phy";
+ reg = <0x18030000 0x100>;
+ #phy-cells = <0>;
+
+ reset-names = "usb-phy", "usb-suspend-override";
+ resets = <&rst 4>, <&rst 3>;
+
+ status = "disabled";
+ };
+
+ gpio: gpio@18040000 {
+ compatible = "qca,qca9530-gpio",
+ "qca,ar9340-gpio";
+ reg = <0x18040000 0x28>;
+
+ interrupts = <2>;
+ ngpios = <20>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pinmux: pinmux@1804002c {
+ compatible = "pinctrl-single";
+
+ reg = <0x1804002c 0x48>;
+
+ #size-cells = <0>;
+
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x1>;
+ #pinctrl-cells = <2>;
+
+ jtag_disable_pins: pinmux_jtag_disable_pins {
+ pinctrl-single,bits = <0x40 0x2 0x2>;
+ };
+ };
+
+ pll: pll-controller@18050000 {
+ compatible = "qca,qca9530-pll", "syscon";
+ reg = <0x18050000 0x48>;
+
+ #clock-cells = <1>;
+ clock-output-names = "cpu", "ddr", "ahb";
+ clocks = <&extosc>;
+ };
+
+ wdt: wdt@18060008 {
+ compatible = "qca,qca9530-wdt", "qca,ar7130-wdt";
+ reg = <0x18060008 0x8>;
+
+ interrupts = <4>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "wdt";
+ };
+
+ rst: reset-controller@1806001c {
+ compatible = "qca,qca9530-reset",
+ "qca,ar7100-reset";
+ reg = <0x1806001c 0xac>;
+
+ #reset-cells = <1>;
+
+ intc2: interrupt-controller {
+ compatible = "qca,ar9340-intc";
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ qca,int-status-addr = <0xac>;
+ qca,pending-bits = <0xf>, /* wmac */
+ <0x1f0>; /* pcie rc1 */
+
+ qca,ddr-wb-channel-interrupts = <0>, <1>;
+ qca,ddr-wb-channels = <&ddr_ctrl 4>, <&ddr_ctrl 3>;
+ };
+ };
+ };
+
+ gmac: gmac@18070000 {
+ compatible = "qca,ar9330-gmac";
+ reg = <0x18070000 0x4>;
+ };
+
+ pcie0: pcie-controller@180c0000 {
+ compatible = "qcom,ar7240-pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0x0>;
+ reg = <0x180c0000 0x1000>, /* CRP */
+ <0x180f0000 0x100>, /* CTRL */
+ <0x14000000 0x1000>; /* CFG */
+ reg-names = "crp_base", "ctrl_base", "cfg_base";
+ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
+ 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
+ interrupt-parent = <&intc2>;
+ interrupts = <1>;
+
+ resets = <&rst 6>, <&rst 7>;
+ reset-names = "hc", "phy";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-map-mask = <0 0 0 1>;
+ interrupt-map = <0 0 0 0 &pcie0 0>;
+ status = "disabled";
+ };
+
+ wmac: wmac@18100000 {
+ compatible = "qca,qca9530-wmac";
+ reg = <0x18100000 0x20000>;
+
+ interrupt-parent = <&intc2>;
+ interrupts = <0>;
+
+ status = "disabled";
+ };
+
+ usb0: usb@1b000000 {
+ compatible = "generic-ehci";
+ reg = <0x1b000000 0x1000>;
+
+ interrupts = <3>;
+ resets = <&rst 5>;
+ reset-names = "usb-host";
+ dr_mode = "host";
+
+ has-transaction-translator;
+ caps-offset = <0x100>;
+
+ phy-names = "usb-phy";
+ phys = <&usb_phy>;
+
+ status = "disabled";
+ };
+
+ spi: spi@1f000000 {
+ compatible = "qca,ar934x-spi";
+ reg = <0x1f000000 0x1c>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&cpuintc {
+ qca,ddr-wb-channel-interrupts = <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 2>, <&ddr_ctrl 0>,
+ <&ddr_ctrl 1>;
+};
+
+ð0 {
+ compatible = "qca,qca9530-eth", "syscon";
+ pll-data = <0x82000101 0x80000101 0x80001313>;
+ reg = <0x19000000 0x200
+ 0x18070000 0x4>;
+ pll-reg = <0x4 0x2c 17>;
+ pll-handle = <&pll>;
+
+ reset-names = "mac";
+ resets = <&rst 9>;
+};
+
+&mdio1 {
+ status = "okay";
+ resets = <&rst 23>;
+ reset-names = "mdio";
+ builtin-switch;
+
+ builtin_switch: switch0@1f {
+ compatible = "qca,ar8229";
+
+ reg = <0x1f>;
+ resets = <&rst 8>;
+ reset-names = "switch";
+ phy-mode = "gmii";
+ qca,phy4-mii-enable;
+ qca,mib-poll-interval = <500>;
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ swphy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "mii";
+ };
+
+ swphy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "mii";
+ };
+ };
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ compatible = "qca,qca9530-eth", "syscon";
+ resets = <&rst 13>;
+ reset-names = "mac";
+
+ phy-mode = "gmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
diff --git a/target/linux/ath79/dts/qca953x_dlink_dap-2xxx.dtsi b/target/linux/ath79/dts/qca953x_dlink_dap-2xxx.dtsi
new file mode 100644
index 0000000..71d9fff
--- /dev/null
+++ b/target/linux/ath79/dts/qca953x_dlink_dap-2xxx.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "bdcfg";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "rgdb";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "unused";
+ reg = <0x60000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca953x_tplink_tl-wr810n.dtsi b/target/linux/ath79/dts/qca953x_tplink_tl-wr810n.dtsi
new file mode 100644
index 0000000..ab8ac92
--- /dev/null
+++ b/target/linux/ath79/dts/qca953x_tplink_tl-wr810n.dtsi
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = ð1;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "blue:system";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ switch_b0 {
+ label = "switch_b0";
+ linux,input-type = <EV_SW>;
+ linux,code = <BTN_0>;
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ switch_b1 {
+ label = "switch_b1";
+ linux,input-type = <EV_SW>;
+ linux,code = <BTN_1>;
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x7d0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/qca9550_airtight_c-75.dts b/target/linux/ath79/dts/qca9550_airtight_c-75.dts
new file mode 100644
index 0000000..a984b38
--- /dev/null
+++ b/target/linux/ath79/dts/qca9550_airtight_c-75.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "AirTight Networks C-75";
+ compatible = "airtight,c-75", "qca,qca9550", "qca,qca9558";
+
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "amber:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ virtual_flash {
+ compatible = "mtd-concat";
+ devices = <&fwconcat0 &fwconcat1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "firmware";
+ reg = <0x0 0x1f90000>;
+ compatible = "denx,uimage";
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+ phy-handle = <&phy0>;
+ pll-data = <0xa6000000 0x00000101 0x00001616>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
+ 0x58 0xc935c935 /* LED2 CTRL */
+ 0x5c 0x03ffff00 /* LED3 CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6_STATUS */
+ >;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x6>;
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0x0000 0 0 0 0>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ label = "wlandrv";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ fwconcat0: partition@60000 {
+ label = "fwconcat0";
+ reg = <0x060000 0xf90000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+
+ flash@1 {
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ fwconcat1: partition@0 {
+ label = "fwconcat1";
+ reg = <0x0 0x1000000>;
+ };
+ };
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9556_avm_fritz-repeater.dtsi b/target/linux/ath79/dts/qca9556_avm_fritz-repeater.dtsi
new file mode 100644
index 0000000..d0c796f
--- /dev/null
+++ b/target/linux/ath79/dts/qca9556_avm_fritz-repeater.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "urlader";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "avm,eva-firmware";
+ label = "firmware";
+ reg = <0x20000 0xee0000>;
+ };
+
+ partition@f00000 {
+ label = "tffs (1)";
+ reg = <0xf00000 0x80000>;
+ read-only;
+ };
+
+ partition@f80000 {
+ label = "tffs (2)";
+ reg = <0xf80000 0x80000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ qca,no-eeprom;
+};
+
+ð1 {
+ status = "okay";
+
+ phy-handle = <&phy0>;
+ pll-data = <0x3000000 0x101 0x1313>;
+
+ qca955x-sgmii-fixup;
+
+ gmac-config {
+ device = <&gmac>;
+ ge0-sgmii = <0>;
+ };
+};
+
+&mdio1 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ at803x-override-sgmii-link-check;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9556_avm_fritz1750e.dts b/target/linux/ath79/dts/qca9556_avm_fritz1750e.dts
new file mode 100644
index 0000000..bdb983c
--- /dev/null
+++ b/target/linux/ath79/dts/qca9556_avm_fritz1750e.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9556_avm_fritz-repeater.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "avm,fritz1750e", "qca,qca9556";
+ model = "AVM FRITZ!WLAN Repeater 1750E";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ led_spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <0>;
+
+ spi_gpio: led_gpio@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <1>;
+ spi-max-frequency = <10000000>;
+
+ gpio_latch_bit {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "gpio-latch-bit";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&spi_gpio 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&spi_gpio 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssi0 {
+ label = "green:rssi0";
+ gpios = <&spi_gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssi1 {
+ label = "green:rssi1";
+ gpios = <&spi_gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssi2 {
+ label = "green:rssi2";
+ gpios = <&spi_gpio 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssi3 {
+ label = "green:rssi3";
+ gpios = <&spi_gpio 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssi4 {
+ label = "green:rssi4";
+ gpios = <&spi_gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&phy0 {
+ reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+};
+
+&gpio {
+ reset-pcie-ep {
+ gpio-hog;
+ gpios = <17 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PCIE EP reset";
+ };
+
+ reset-pcie {
+ gpio-hog;
+ gpios = <18 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PCIE Bus reset";
+ };
+};
diff --git a/target/linux/ath79/dts/qca9556_avm_fritz450e.dts b/target/linux/ath79/dts/qca9556_avm_fritz450e.dts
new file mode 100644
index 0000000..0d30535
--- /dev/null
+++ b/target/linux/ath79/dts/qca9556_avm_fritz450e.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9556_avm_fritz-repeater.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "avm,fritz450e", "qca,qca9556";
+ model = "AVM FRITZ!WLAN Repeater 450E";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi2 {
+ label = "green:rssi2";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi3 {
+ label = "green:rssi3";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi4 {
+ label = "green:rssi4";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio {
+ /*
+ * Wondered why rssi0 and rssi1 are missing?
+ *
+ * AVM seems to have run low on usable GPIO pins, so
+ * instead of adding a shift register like they did for
+ * the 1750E they figured out "Why not use the LEDs on
+ * the AR8033?".
+ *
+ * EVA configures the PHY in a way it does not display
+ * the link-state using it's LEDs. When we reset the PHY
+ * using the reset-mechanism of the PHY subsystem, this
+ * setting is cleared.
+ *
+ * We avoid this by keeping the reset line high.
+ */
+ phy-reset {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "phy-reset";
+ };
+};
diff --git a/target/linux/ath79/dts/qca9556_avm_fritzdvbc.dts b/target/linux/ath79/dts/qca9556_avm_fritzdvbc.dts
new file mode 100644
index 0000000..bf1c026
--- /dev/null
+++ b/target/linux/ath79/dts/qca9556_avm_fritzdvbc.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9556_avm_fritz-repeater.dtsi"
+
+/ {
+ compatible = "avm,fritzdvbc", "qca,qca9556";
+ model = "AVM FRITZ!WLAN Repeater DVB-C";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ led_spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ mosi-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ num-chipselects = <0>;
+
+ spi_gpio: led_gpio@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <2>;
+ spi-max-frequency = <10000000>;
+
+ gpio_latch_bit {
+ gpio-hog;
+ gpios = <16 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "gpio-latch-bit";
+ };
+ };
+ };
+
+ /*
+ * GPIO pins 100 or greater in the vendor GPL dump are redirected
+ * to the shift register.
+ * So OEM source pin 100 becomes 0 on the SR and so forth.
+ */
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&spi_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&spi_gpio 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ tv {
+ label = "green:tv";
+ gpios = <&spi_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ rssihigh {
+ label = "green:rssihigh";
+ gpios = <&spi_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimediumhigh {
+ label = "green:rssimediumhigh";
+ gpios = <&spi_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimedium {
+ label = "green:rssimedium";
+ gpios = <&spi_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimediumlow {
+ label = "green:rssimediumlow";
+ gpios = <&spi_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ rssilow {
+ label = "green:rssilow";
+ gpios = <&spi_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&gpio {
+ reset-pcie-ep {
+ gpio-hog;
+ gpios = <109 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PCIE EP reset";
+ };
+
+ reset-pcie-bus {
+ gpio-hog;
+ gpios = <110 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PCIE Bus reset";
+ };
+};
diff --git a/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts b/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts
new file mode 100644
index 0000000..f5c6731
--- /dev/null
+++ b/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "mikrotik,routerboard-wap-g-5hact2hnd", "qca,qca9556";
+ model = "MikroTik RouterBOARD wAP G-5HacT2HnD";
+
+ aliases {
+ mdio-gpio1 = &mdio2;
+ serial0 = &uart;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ mdio2: mdio {
+ compatible = "virtual,mdio-gpio";
+
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>, /* MDC */
+ <&gpio 11 GPIO_ACTIVE_HIGH>; /* MDIO */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ device_type = "ethernet-phy";
+
+ phy-mode = "sgmii";
+
+ at803x-override-sgmii-link-check;
+ };
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x80000101 0x80001313>;
+ phy-handle = <&phy0>;
+
+ qca955x-sgmii-fixup;
+
+ gmac-config {
+ device = <&gmac>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "RouterBoot";
+ reg = <0x0 0x20000>;
+ read-only;
+ compatible = "mikrotik,routerboot-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader1";
+ reg = <0x0 0x0>;
+ read-only;
+ };
+
+ hard_config: hard_config {
+ read-only;
+ };
+
+ bios {
+ size = <0x1000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "bootloader2";
+ reg = <0x10000 0x0>;
+ read-only;
+ };
+
+ soft_config {
+ label = "soft_config";
+ };
+ };
+
+ partition@20000 {
+ compatible = "mikrotik,minor";
+ label = "firmware";
+ reg = <0x020000 0xfe0000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ qca,no-eeprom;
+};
+
+&pcie0 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9557_8dev_rambutan.dts b/target/linux/ath79/dts/qca9557_8dev_rambutan.dts
new file mode 100644
index 0000000..638d78a
--- /dev/null
+++ b/target/linux/ath79/dts/qca9557_8dev_rambutan.dts
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "8dev,rambutan", "qca,qca9557";
+ model = "8devices Rambutan";
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x300000>;
+ read-only;
+ };
+
+ partition@300000 {
+ label = "u-boot-env";
+ reg = <0x300000 0x200000>;
+ };
+
+ art: partition@500000 {
+ label = "art";
+ reg = <0x500000 0x100000>;
+ read-only;
+ };
+
+ partition@600000 {
+ label = "ubi";
+ reg = <0x600000 0x7a00000>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ reset-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&mdio1 {
+ status = "okay";
+
+ phy1: ethernet-phy@0 {
+ reg = <0>;
+ reset-gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ phy-mode = "sgmii";
+ at803x-override-sgmii-link-check;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+ phy-mode = "mii";
+ phy-handle = <&phy0>;
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x17000000 0x101 0x1313>;
+ phy-handle = <&phy1>;
+ qca955x-sgmii-fixup;
+ mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+ status = "okay";
+
+ gpio-controller;
+ mtd-cal-data = <&art 0x1000>;
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+};
diff --git a/target/linux/ath79/dts/qca9557_buffalo_bhr-4grv2.dts b/target/linux/ath79/dts/qca9557_buffalo_bhr-4grv2.dts
new file mode 100644
index 0000000..dce1a21
--- /dev/null
+++ b/target/linux/ath79/dts/qca9557_buffalo_bhr-4grv2.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "buffalo,bhr-4grv2", "qca,qca9557";
+ model = "Buffalo BHR-4GRV2";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ diag {
+ label = "orange:diag";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ vpn_orange {
+ label = "orange:vpn";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ vpn_green {
+ label = "green:vpn";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+
+ eco {
+ label = "eco";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x80080080 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+ phy-handle = <&phy0>;
+ pll-data = <0x56000000 0x00000101 0x00001616>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x6>;
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9557_dlink_dap-2660-a1.dts b/target/linux/ath79/dts/qca9557_dlink_dap-2660-a1.dts
new file mode 100644
index 0000000..622f441
--- /dev/null
+++ b/target/linux/ath79/dts/qca9557_dlink_dap-2660-a1.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x_dlink_dap-2xxx.dtsi"
+
+/ {
+ compatible = "dlink,dap-2660-a1", "qca,qca9557";
+ model = "D-Link DAP-2660 A1";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_red;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+};
+
+&partitions {
+ partition@70000 {
+ label = "firmware";
+ reg = <0x70000 0xee0000>;
+ compatible = "wrg";
+ };
+
+ partition@f50000 {
+ label = "dlink";
+ reg = <0xf50000 0xa0000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x82000000 0x80000101 0x80001313>;
+
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii-id";
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-enabled = <1>;
+ rxd-delay = <3>;
+ rxdv-delay = <3>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9557_engenius_eap1200h.dts b/target/linux/ath79/dts/qca9557_engenius_eap1200h.dts
new file mode 100644
index 0000000..80298a9
--- /dev/null
+++ b/target/linux/ath79/dts/qca9557_engenius_eap1200h.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x_senao_loader.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "engenius,eap1200h", "qca,qca9557";
+ model = "EnGenius EAP1200H";
+
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "amber:power";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wifi2g {
+ label = "blue:wifi2g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wifi5g {
+ label = "green:wifi5g";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wps {
+ label = "blue:wps";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&partitions {
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ eee-broken-100tx;
+ eee-broken-1000t;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii-id";
+
+ pll-data = <0x82000000 0x80000101 0x80001313>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+};
diff --git a/target/linux/ath79/dts/qca9557_engenius_ecb1200.dts b/target/linux/ath79/dts/qca9557_engenius_ecb1200.dts
new file mode 100644
index 0000000..955f17f
--- /dev/null
+++ b/target/linux/ath79/dts/qca9557_engenius_ecb1200.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x_engenius_ecb1xxx.dtsi"
+
+/ {
+ compatible = "engenius,ecb1200", "qca,qca9557";
+ model = "EnGenius ECB1200";
+};
diff --git a/target/linux/ath79/dts/qca9557_engenius_enstationac-v1.dts b/target/linux/ath79/dts/qca9557_engenius_enstationac-v1.dts
new file mode 100644
index 0000000..5da50ff
--- /dev/null
+++ b/target/linux/ath79/dts/qca9557_engenius_enstationac-v1.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x_senao_loader.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "engenius,enstationac-v1", "qca,qca9557";
+ model = "EnGenius EnStationAC v1";
+
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "amber:power";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ rssilow {
+ label = "red:rssilow";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimedium {
+ label = "amber:rssimedium";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+
+ rssihigh {
+ label = "green:rssihigh";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&partitions {
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ eee-broken-100tx;
+ eee-broken-1000t;
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ eee-broken-100tx;
+ eee-broken-1000t;
+ at803x-override-sgmii-link-check;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
+
+ pll-data = <0x82000000 0x80000101 0x80001313>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+
+ phy-handle = <&phy2>;
+
+ pll-data = <0x03000000 0x00000101 0x00001313>;
+
+ qca955x-sgmii-fixup;
+};
diff --git a/target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi b/target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi
new file mode 100644
index 0000000..204a63c
--- /dev/null
+++ b/target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ eco {
+ label = "green:eco";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ notification {
+ label = "amber:notification";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys: keys {
+ compatible = "gpio-keys";
+
+ eco {
+ label = "eco";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ debounce-interval = <60>;
+ };
+
+ auto {
+ label = "auto";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+
+ router {
+ label = "router";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x030000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x030000 0x010000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x040000 0xe50000>;
+ };
+
+ partition@e90000 {
+ label = "manufacture";
+ reg = <0xe90000 0x100000>;
+ read-only;
+ };
+
+ partition@f90000 {
+ label = "backup";
+ reg = <0xf90000 0x010000>;
+ read-only;
+ };
+
+ partition@fa0000 {
+ label = "storage";
+ reg = <0xfa0000 0x050000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x87600000 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0xa6000000 0x00000101 0x00001616>;
+ phy-handle = <&phy0>;
+};
+
+&pcie1 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "pci168c,003c";
+ reg = <0x0000 0 0 0 0>;
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ qca,no-eeprom;
+};
diff --git a/target/linux/ath79/dts/qca9557_iodata_wn-ac1167dgr.dts b/target/linux/ath79/dts/qca9557_iodata_wn-ac1167dgr.dts
new file mode 100644
index 0000000..9a938af
--- /dev/null
+++ b/target/linux/ath79/dts/qca9557_iodata_wn-ac1167dgr.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9557_iodata_wn-ac-dgr.dtsi"
+
+/ {
+ compatible = "iodata,wn-ac1167dgr", "qca,qca9557";
+ model = "I-O DATA WN-AC1167DGR";
+};
+
+&leds {
+ copy {
+ label = "green:copy";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&keys {
+ copy {
+ label = "copy";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ debounce-interval = <60>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr.dts b/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr.dts
new file mode 100644
index 0000000..1e7d92d
--- /dev/null
+++ b/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9557_iodata_wn-ac-dgr.dtsi"
+
+/ {
+ compatible = "iodata,wn-ac1600dgr", "qca,qca9557";
+ model = "I-O DATA WN-AC1600DGR";
+};
+
+&leds {
+ function {
+ label = "green:function";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&keys {
+ function {
+ label = "function";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ debounce-interval = <60>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts b/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts
new file mode 100644
index 0000000..af2607d
--- /dev/null
+++ b/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9557_iodata_wn-ac-dgr.dtsi"
+
+/ {
+ compatible = "iodata,wn-ac1600dgr2", "iodata,wn-ac1600dgr3", "qca,qca9557";
+ model = "I-O DATA WN-AC1600DGR2/DGR3";
+};
+
+&leds {
+ copy {
+ label = "green:copy";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&keys {
+ copy {
+ label = "copy";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ debounce-interval = <60>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9557_zyxel_nbg6616.dts b/target/linux/ath79/dts/qca9557_zyxel_nbg6616.dts
new file mode 100644
index 0000000..fff23dc
--- /dev/null
+++ b/target/linux/ath79/dts/qca9557_zyxel_nbg6616.dts
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x_zyxel_nbg6x16.dtsi"
+
+/ {
+ compatible = "zyxel,nbg6616", "qca,qca9557";
+ model = "ZyXEL NBG6616";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ usb1 {
+ label = "green:usb1";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port0>;
+ };
+
+ usb2 {
+ label = "green:usb2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port1>;
+ };
+
+ wifi2g {
+ label = "green:wifi2g";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wifi5g {
+ label = "green:wifi5g";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wps {
+ label = "green:wps";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio_usb_power {
+ line-name = "nbg6616:power:usb";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x030000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x030000 0x010000>;
+ };
+
+ art: partition@40000 {
+ label = "art";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "zyxel_rfsd";
+ reg = <0x050000 0x060000>;
+ };
+
+ partition@b0000 {
+ label = "romd";
+ reg = <0x0b0000 0x060000>;
+ };
+
+ partition@110000 {
+ label = "header";
+ reg = <0x110000 0x010000>;
+ };
+
+ partition@120000 {
+ label = "firmware";
+ reg = <0x120000 0xee0000>;
+ compatible = "denx,uimage";
+ };
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+ qca,no-eeprom;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9558_allnet_all-wap02860ac.dts b/target/linux/ath79/dts/qca9558_allnet_all-wap02860ac.dts
new file mode 100644
index 0000000..973cb16
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_allnet_all-wap02860ac.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x_senao_loader.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "allnet,all-wap02860ac", "qca,qca9558";
+ model = "ALLNET ALL-WAP02860AC";
+
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "amber:power";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "blue:wlan2g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wps {
+ label = "blue:wps";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii-id";
+
+ pll-data = <0x82000000 0x80000101 0x80001313>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ eee-broken-100tx;
+ eee-broken-1000t;
+ };
+};
+
+&partitions {
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+};
diff --git a/target/linux/ath79/dts/qca9558_belkin_f9j1108-v2.dts b/target/linux/ath79/dts/qca9558_belkin_f9j1108-v2.dts
new file mode 100644
index 0000000..80775d6
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_belkin_f9j1108-v2.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_belkin_f9x-v2.dtsi"
+
+/ {
+ model = "Belkin F9J1108 v2 (AC1750 DB Wi-Fi)";
+ compatible = "belkin,f9j1108-v2", "qca,qca9558";
+};
diff --git a/target/linux/ath79/dts/qca9558_belkin_f9k1115-v2.dts b/target/linux/ath79/dts/qca9558_belkin_f9k1115-v2.dts
new file mode 100644
index 0000000..aa5851c
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_belkin_f9k1115-v2.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_belkin_f9x-v2.dtsi"
+
+/ {
+ model = "Belkin F9K1115 v2 (AC 1750 DB)";
+ compatible = "belkin,f9k1115-v2", "qca,qca9558";
+};
diff --git a/target/linux/ath79/dts/qca9558_belkin_f9x-v2.dtsi b/target/linux/ath79/dts/qca9558_belkin_f9x-v2.dtsi
new file mode 100644
index 0000000..e4bb6c2
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_belkin_f9x-v2.dtsi
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = ð1;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "green:usb2";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+
+ status {
+ label = "amber:status";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wps-amber {
+ label = "amber:wps";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wps-blue {
+ label = "blue:wps";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+
+ led_system: system {
+ label = "blue:system";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb2_power {
+ gpio-export,name = "usb2:power";
+ gpio-export,output = <1>;
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ virtual_flash {
+ compatible = "mtd-concat";
+
+ devices = <&fwconcat0 &fwconcat1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <IH_MAGIC_OKLI>;
+ label = "firmware";
+ reg = <0x0 0x0>;
+ };
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ fwconcat0: partition@50000 {
+ label = "fwconcat0";
+ reg = <0x050000 0xe20000>;
+ };
+
+ partition@e70000 {
+ label = "loader";
+ reg = <0xe70000 0x10000>;
+ read-only;
+ };
+
+ fwconcat1: partition@e80000 {
+ label = "fwconcat1";
+ reg = <0xe80000 0x170000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+ 0x50 0xc737c737 /* LED_CTRL0 */
+ 0x54 0x00000000 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x0030c300 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+ phy-handle = <&phy0>;
+ pll-data = <0xa6000000 0x00000101 0x00001616>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-enabled = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <(-1)>;
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9558_comfast_cf-wr650ac-v1.dts b/target/linux/ath79/dts/qca9558_comfast_cf-wr650ac-v1.dts
new file mode 100644
index 0000000..639c877
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_comfast_cf-wr650ac-v1.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_comfast_cf-wr650ac.dtsi"
+
+/ {
+ compatible = "comfast,cf-wr650ac-v1", "qca,qca9558";
+ model = "Comfast CF-WR650AC v1";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ art: partition@20000 {
+ label = "art";
+ reg = <0x020000 0x010000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "firmware";
+ compatible = "denx,uimage";
+ reg = <0x030000 0xfc0000>;
+ };
+
+ partition@ff0000 {
+ label = "nvram";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9558_comfast_cf-wr650ac-v2.dts b/target/linux/ath79/dts/qca9558_comfast_cf-wr650ac-v2.dts
new file mode 100644
index 0000000..5dda5f1
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_comfast_cf-wr650ac-v2.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_comfast_cf-wr650ac.dtsi"
+
+/ {
+ compatible = "comfast,cf-wr650ac-v2", "qca,qca9558";
+ model = "Comfast CF-WR650AC v2";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ art: partition@40000 {
+ label = "art";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ compatible = "denx,uimage";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ partition@ff0000 {
+ label = "nvram";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9558_comfast_cf-wr650ac.dtsi b/target/linux/ath79/dts/qca9558_comfast_cf-wr650ac.dtsi
new file mode 100644
index 0000000..d8a3116
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_comfast_cf-wr650ac.dtsi
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "blue:wps";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ network {
+ label = "blue:network";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "blue:wlan2";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "blue:wlan5";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ hw_margin_ms = <500>;
+ always-running;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ switch0@1f {
+ compatible = "qca,ar8327";
+ reg = <0x1f>;
+ qca,ar8327-initvals = <
+ 0x04 0x87600000 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRAP */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0xa6000000 0x00000101 0x00001616>;
+ mtd-mac-address = <&art 0x0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+ mtd-mac-address = <&art 0x6>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x18>;
+};
+
+// This node is required for the Ethernet ports to work correctly.
+&gpio {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9558_devolo_dvl1200e.dts b/target/linux/ath79/dts/qca9558_devolo_dvl1200e.dts
new file mode 100644
index 0000000..9e38a9f
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_devolo_dvl1200e.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_devolo_dvl1xxx.dtsi"
+
+/ {
+ compatible = "devolo,dvl1200e", "qca,qca9558";
+ model = "devolo WiFi pro 1200e";
+
+ aliases {
+ led-boot = &led_status_blue;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_blue: status_blue {
+ label = "blue:status";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_status_red: status_red {
+ label = "red:status";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+ð0 {
+ pll-data = <0xae000000 0x80000101 0x80001313>;
+ phy-mode = "rgmii-rxid";
+};
+
+&gmac_config {
+ rxdv-delay = <3>;
+ rxd-delay = <3>;
+ txen-delay = <0>;
+ txd-delay = <0>;
+};
+
+&mdio1 {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ at803x-override-sgmii-link-check;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x00>;
+ mtd-mac-address-increment = <1>;
+
+ phy-handle = <&phy1>;
+ pll-data = <0x03000101 0x00000101 0x00001313>;
+
+ qca955x-sgmii-fixup;
+};
diff --git a/target/linux/ath79/dts/qca9558_devolo_dvl1200i.dts b/target/linux/ath79/dts/qca9558_devolo_dvl1200i.dts
new file mode 100644
index 0000000..97687f1
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_devolo_dvl1200i.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_devolo_dvl1xxx.dtsi"
+
+/ {
+ compatible = "devolo,dvl1200i", "qca,qca9558";
+ model = "devolo WiFi pro 1200i";
+
+ aliases {
+ led-boot = &led_status_blue;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_blue: status_blue {
+ label = "blue:status";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_status_red: status_red {
+ label = "red:status";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+ð0 {
+ pll-data = <0xbe000000 0x80000101 0x80001313>;
+ phy-mode = "rgmii-id";
+};
+
+&gmac_config {
+ rxdv-delay = <3>;
+ rxd-delay = <3>;
+ txen-delay = <3>;
+ txd-delay = <3>;
+};
diff --git a/target/linux/ath79/dts/qca9558_devolo_dvl1750c.dts b/target/linux/ath79/dts/qca9558_devolo_dvl1750c.dts
new file mode 100644
index 0000000..ee6d356
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_devolo_dvl1750c.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_devolo_dvl1xxx.dtsi"
+
+/ {
+ compatible = "devolo,dvl1750c", "qca,qca9558";
+ model = "devolo WiFi pro 1750c";
+
+ aliases {
+ led-boot = &led_status_blue;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_blue: status_blue {
+ label = "blue:status";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_status_red: status_red {
+ label = "red:status";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+ð0 {
+ pll-data = <0xae000000 0x80000101 0x80001313>;
+ phy-mode = "rgmii-id";
+};
+
+&gmac_config {
+ rxdv-delay = <3>;
+ rxd-delay = <3>;
+ txen-delay = <3>;
+ txd-delay = <3>;
+};
diff --git a/target/linux/ath79/dts/qca9558_devolo_dvl1750e.dts b/target/linux/ath79/dts/qca9558_devolo_dvl1750e.dts
new file mode 100644
index 0000000..0a1c9cb
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_devolo_dvl1750e.dts
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_devolo_dvl1xxx.dtsi"
+
+/ {
+ compatible = "devolo,dvl1750e", "qca,qca9558";
+ model = "devolo WiFi pro 1750e";
+
+ aliases {
+ led-boot = &led_status_blue;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_red;
+ };
+
+ keys {
+ wps {
+ label = "WPS Button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ usb_eject {
+ label = "USB Eject Button";
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_blue: status_blue {
+ label = "blue:status";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_status_red: status_red {
+ label = "red:status";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+
+ gpio_usb_power {
+ gpio-export,name = "devolo:power:usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+ð0 {
+ pll-data = <0xae000000 0x80000101 0x80001313>;
+ phy-mode = "rgmii-rxid";
+};
+
+&gmac_config {
+ rxdv-delay = <3>;
+ rxd-delay = <3>;
+ txen-delay = <0>;
+ txd-delay = <0>;
+};
+
+&mdio1 {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ at803x-override-sgmii-link-check;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x00>;
+ mtd-mac-address-increment = <1>;
+
+ phy-handle = <&phy1>;
+ pll-data = <0x03000101 0x00000101 0x00001313>;
+
+ qca955x-sgmii-fixup;
+};
diff --git a/target/linux/ath79/dts/qca9558_devolo_dvl1750i.dts b/target/linux/ath79/dts/qca9558_devolo_dvl1750i.dts
new file mode 100644
index 0000000..2b808ce
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_devolo_dvl1750i.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_devolo_dvl1xxx.dtsi"
+
+/ {
+ compatible = "devolo,dvl1750i", "qca,qca9558";
+ model = "devolo WiFi pro 1750i";
+
+ aliases {
+ led-boot = &led_status_blue;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_blue: status_blue {
+ label = "blue:status";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_status_red: status_red {
+ label = "red:status";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+ð0 {
+ pll-data = <0xbe000000 0x80000101 0x80001313>;
+ phy-mode = "rgmii-id";
+};
+
+&gmac_config {
+ rxdv-delay = <3>;
+ rxd-delay = <3>;
+ txen-delay = <3>;
+ txd-delay = <3>;
+};
diff --git a/target/linux/ath79/dts/qca9558_devolo_dvl1750x.dts b/target/linux/ath79/dts/qca9558_devolo_dvl1750x.dts
new file mode 100644
index 0000000..747a1a4
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_devolo_dvl1750x.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_devolo_dvl1xxx.dtsi"
+
+/ {
+ compatible = "devolo,dvl1750x", "qca,qca9558";
+ model = "devolo WiFi pro 1750x";
+
+ aliases {
+ led-boot = &led_status_red;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_red;
+ led-upgrade = &led_status_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_red: status_red {
+ /* This LED is not visible on the external casing. */
+ label = "red:status";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+ð0 {
+ pll-data = <0xbe000000 0x80000101 0x80001313>;
+ phy-mode = "rgmii-id";
+};
+
+&gmac_config {
+ rxdv-delay = <3>;
+ rxd-delay = <3>;
+ txen-delay = <3>;
+ txd-delay = <3>;
+};
diff --git a/target/linux/ath79/dts/qca9558_devolo_dvl1xxx.dtsi b/target/linux/ath79/dts/qca9558_devolo_dvl1xxx.dtsi
new file mode 100644
index 0000000..7ae33c3
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_devolo_dvl1xxx.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/*
+ * The hardware of this board family is most likely shared with other devices
+ * from other manufacturers.
+ * Devolo seems to use hardware from Edimax, namely the Edimax WAP1750.
+ *
+ * The base board is identical but the single models differ in number of
+ * buttons, ethernet ports, external console, USB, external / internal
+ * antennas and number of spatial streams.
+ */
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ hw_margin_ms = <300>;
+ always-running;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "art_bak";
+ reg = <0x060000 0x010000>;
+ read-only;
+ };
+
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0xf90000>;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ eee-broken-100tx;
+ eee-broken-1000t;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x00>;
+ phy-handle = <&phy4>;
+
+ gmac_config: gmac-config {
+ device = <&gmac>;
+
+ rgmii-enabled = <1>;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x00>;
+ mtd-mac-address-increment = <(-2)>;
+};
diff --git a/target/linux/ath79/dts/qca9558_dlink_dap-2680-a1.dts b/target/linux/ath79/dts/qca9558_dlink_dap-2680-a1.dts
new file mode 100644
index 0000000..7549c0a
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_dlink_dap-2680-a1.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x_dlink_dap-2xxx.dtsi"
+
+/ {
+ compatible = "dlink,dap-2680-a1", "qca,qca9558";
+ model = "D-Link DAP-2680 A1";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_red;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+};
+
+&partitions {
+ partition@70000 {
+ label = "firmware";
+ reg = <0x70000 0xee0000>;
+ compatible = "wrg";
+ };
+
+ partition@f50000 {
+ label = "dlink";
+ reg = <0xf50000 0xa0000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x82000000 0x80000101 0x80001313>;
+
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii-id";
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-enabled = <1>;
+ rxd-delay = <3>;
+ rxdv-delay = <3>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9558_dlink_dap-2695-a1.dts b/target/linux/ath79/dts/qca9558_dlink_dap-2695-a1.dts
new file mode 100644
index 0000000..15a32a1
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_dlink_dap-2695-a1.dts
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dap-2695-a1", "qca,qca9558";
+ model = "D-link DAP-2695-A1";
+
+ aliases {
+ led-boot = &led_power_red;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi2g {
+ label = "green:wifi2g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l12805d";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "bdcfg";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "rgdb";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "langpack";
+ reg = <0x060000 0x010000>;
+ read-only;
+ };
+
+ partition@70000 {
+ compatible = "wrg";
+ label = "firmware";
+ reg = <0x070000 0xf00000>;
+ };
+
+ partition@f70000 {
+ label = "captival";
+ reg = <0xf70000 0x070000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "certificate";
+ reg = <0xfe0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0_PAD_CTRL */
+ 0x0c 0x00080080 /* PORT6_PAD_CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy0>;
+ pll-data = <0x56000000 0x00000101 0x00001616>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ phy-mask = <0>;
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ qca,no-eeprom;
+};
diff --git a/target/linux/ath79/dts/qca9558_dlink_dap-3662-a1.dts b/target/linux/ath79/dts/qca9558_dlink_dap-3662-a1.dts
new file mode 100644
index 0000000..55ac061
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_dlink_dap-3662-a1.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x_dlink_dap-2xxx.dtsi"
+
+/ {
+ compatible = "dlink,dap-3662-a1", "qca,qca9558";
+ model = "D-Link DAP-3662 A1";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_red;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+};
+
+&partitions {
+ partition@70000 {
+ label = "firmware";
+ reg = <0x70000 0xef0000>;
+ compatible = "wrg";
+ };
+
+ partition@f60000 {
+ label = "dlink";
+ reg = <0xf60000 0x90000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0_PAD_CTRL */
+ 0x0c 0x00080080 /* PORT6_PAD_CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy0>;
+ pll-data = <0x56000000 0x00000101 0x00001616>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9558_domywifi_dw33d.dts b/target/linux/ath79/dts/qca9558_domywifi_dw33d.dts
new file mode 100644
index 0000000..0c42208
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_domywifi_dw33d.dts
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "domywifi,dw33d", "qca,qca9558";
+ model = "DomyWifi DW33D";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "blue:system";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ mmc {
+ label = "blue:mmc";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+
+ usb {
+ label = "blue:usb";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wlan2g {
+ label = "blue:wlan2g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ internet {
+ label = "blue:internet";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ label = "oem-firmware";
+ reg = <0x50000 0xfa0000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x500000>;
+ };
+
+ partition@500000 {
+ label = "ubi";
+ reg = <0x500000 0x5b00000>;
+ };
+
+ partition@6000000 {
+ label = "oem-backup";
+ reg = <0x6000000 0x2000000>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x87600000 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+ pll-data = <0x56000000 0x00000101 0x00001616>;
+ phy-handle = <&phy0>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x6>;
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0xc>;
+};
diff --git a/target/linux/ath79/dts/qca9558_engenius_ecb1750.dts b/target/linux/ath79/dts/qca9558_engenius_ecb1750.dts
new file mode 100644
index 0000000..4ee4c8e
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_engenius_ecb1750.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x_engenius_ecb1xxx.dtsi"
+
+/ {
+ compatible = "engenius,ecb1750", "qca,qca9558";
+ model = "EnGenius ECB1750";
+};
diff --git a/target/linux/ath79/dts/qca9558_engenius_epg5000.dts b/target/linux/ath79/dts/qca9558_engenius_epg5000.dts
new file mode 100644
index 0000000..3571615
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_engenius_epg5000.dts
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "EnGenius EPG5000";
+ compatible = "engenius,epg5000", "qca,qca9558";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "amber:power";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "blue:wlan2g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "blue:wlan5g";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wps_amber {
+ label = "amber:wps";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ wps_blue {
+ label = "blue:wps";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy0>;
+ pll-data = <0xa6000000 0x00000101 0x00001616>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x87600000 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "pci168c,003c";
+ reg = <0x0000 0 0 0 0>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x030000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x030000 0x010000>;
+ };
+
+ partition@40000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x040000 0xe50000>;
+ };
+
+ partition@790000 {
+ label = "manufacture";
+ reg = <0xe90000 0x100000>;
+ read-only;
+ };
+
+ partition@ed0000 {
+ label = "backup";
+ reg = <0xf90000 0x010000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "storage";
+ reg = <0xfa0000 0x050000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ qca,no-eeprom;
+};
diff --git a/target/linux/ath79/dts/qca9558_librerouter_librerouter-v1.dts b/target/linux/ath79/dts/qca9558_librerouter_librerouter-v1.dts
new file mode 100644
index 0000000..ddb91d0
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_librerouter_librerouter-v1.dts
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "librerouter,librerouter-v1", "qca,qca9558";
+ model = "LibreRouter v1";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ wifi_green {
+ label = "green:wlan2g";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ status_blue {
+ label = "blue:status";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ hw_margin_ms = <1000>;
+ always-running;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "pci168c,0033";
+ reg = <0x0000 0 0 0 0>;
+ };
+};
+
+&pcie1 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "pci168c,0033";
+ reg = <0x0000 0 0 0 0>;
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0x7c0000>;
+ };
+
+ partition@810000 {
+ label = "fw2";
+ reg = <0x810000 0x7d0000>;
+ };
+
+ partition@fd0000 {
+ label = "res";
+ reg = <0xfd0000 0x20000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x04 0x87600000 /* PORT0: RGMII, MAC0/6 exchage, tx_delay 01, rx_delay 10 */
+ 0x0c 0x00000080 /* PORT6: SGMII */
+ 0x10 0x81000080 /* POWER_ON_STRAP: LED open drain, SerDes auto-neg disabled */
+ 0x50 0xcf37cf37 /* LED_CTRL0 */
+ 0x54 0xcf37cf37 /* LED_CTRL1 */
+ 0x58 0xcf37cf37 /* LED_CTRL2 */
+ 0x5c 0x0 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0xa6000000 0x00000101 0x00001616>;
+ mtd-mac-address = <&art 0x0>;
+
+ phy-handle = <&phy0>;
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+ mtd-mac-address = <&art 0x6>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0xc>;
+};
diff --git a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-921gs-5hpacd-15s.dts b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-921gs-5hpacd-15s.dts
new file mode 100644
index 0000000..d1f307b
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-921gs-5hpacd-15s.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_mikrotik_routerboard-92x.dtsi"
+
+/ {
+ compatible = "mikrotik,routerboard-921gs-5hpacd-15s", "qca,qca9558";
+ model = "MikroTik RouterBOARD 921GS-5HPacD-15s";
+
+ ath10k-leds {
+ compatible = "gpio-leds";
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&ath10k 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+
+ ath10k: wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts
new file mode 100644
index 0000000..36979bb
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_mikrotik_routerboard-92x.dtsi"
+
+/ {
+ compatible = "mikrotik,routerboard-922uags-5hpacd", "qca,qca9558";
+ model = "MikroTik RouterBOARD 922UAGS-5HPacD";
+
+ ath10k-leds {
+ compatible = "gpio-leds";
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&ath10k 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ gpio-export {
+ gpio_usb_power {
+ gpio-export,name = "mikrotik:power:usb";
+ gpio-export,output = <0>;
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ i2c: i2c {
+ compatible = "i2c-gpio";
+
+ sda-gpios = <&gpio 18 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio 19 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <5>;
+ i2c-gpio,timeout-ms = <1>;
+ };
+
+ sfp1: sfp {
+ compatible = "sff,sfp";
+
+ i2c-bus = <&i2c>;
+ maximum-power-milliwatt = <1000>;
+ los-gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ // Toggling GPIO16 actually enables/disables the transmitter,
+ // but the SFP driver does not seem to be using it.
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ ath10k: wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&mdio1 {
+ status = "okay";
+
+ phy_sfp: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+ sfp = <&sfp1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ phy-handle = <&phy_sfp>;
+ pll-data = <0x03000000 0x00000101 0x00001616>;
+ qca955x-sgmii-fixup;
+
+ gmac-config {
+ device = <&gmac>;
+ };
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi
new file mode 100644
index 0000000..5e91985
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_user;
+ led-failsafe = &led_user;
+ led-upgrade = &led_user;
+ serial0 = &uart;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_user: user {
+ label = "green:user";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_nand_power {
+ gpio-export,name = "mikrotik:power:nand";
+ gpio-export,output = <0>;
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy4>;
+ pll-data = <0x8f000000 0xa0000101 0xa0001313>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-enabled = <1>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "mikrotik,routerboot-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "routerboot";
+ reg = <0x0 0x0>;
+ read-only;
+ };
+
+ hard_config: hard_config {
+ read-only;
+ };
+
+ bios {
+ size = <0x1000>;
+ read-only;
+ };
+
+ soft_config {
+ };
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ nand-ecc-mode = "soft";
+ qca,nand-swap-dma;
+ qca,nand-scan-fixup;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "booter";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "kernel";
+ reg = <0x0040000 0x03c0000>;
+ };
+
+ partition@400000 {
+ label = "ubi";
+ reg = <0x0400000 0x7c00000>;
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9558_netgear_ex6400.dts b/target/linux/ath79/dts/qca9558_netgear_ex6400.dts
new file mode 100644
index 0000000..273c872
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_netgear_ex6400.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_netgear_ex7300.dtsi"
+
+/ {
+ model = "Netgear EX6400";
+ compatible = "netgear,ex6400", "qca,qca9558";
+};
diff --git a/target/linux/ath79/dts/qca9558_netgear_ex7300.dts b/target/linux/ath79/dts/qca9558_netgear_ex7300.dts
new file mode 100644
index 0000000..9802210
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_netgear_ex7300.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_netgear_ex7300.dtsi"
+
+/ {
+ model = "Netgear EX7300";
+ compatible = "netgear,ex7300", "qca,qca9558";
+};
diff --git a/target/linux/ath79/dts/qca9558_netgear_ex7300.dtsi b/target/linux/ath79/dts/qca9558_netgear_ex7300.dtsi
new file mode 100644
index 0000000..2f7cdcf
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_netgear_ex7300.dtsi
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_amber;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_amber;
+ label-mac-device = ð0;
+ };
+
+ led_spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <0>;
+
+ led_gpio: led_gpio@0 {
+ compatible = "nxp,74lvc594";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <1>;
+ spi-max-frequency = <500000>;
+
+ gpio_latch_bit {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "gpio-latch-bit";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_amber: power_amber {
+ label = "amber:power";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ left_blue {
+ label = "blue:left";
+ gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ right_blue {
+ label = "blue:right";
+ gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ wps_green {
+ label = "green:wps";
+ gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ client_red {
+ label = "red:client";
+ gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ client_green {
+ label = "green:client";
+ gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ router_red {
+ label = "red:router";
+ gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ router_green {
+ label = "green:router";
+ gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ extender_apmode {
+ label = "EXTENDER/APMODE switch";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ caldata: partition@50000 {
+ label = "caldata";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "caldata-backup";
+ reg = <0x060000 0x010000>;
+ read-only;
+ };
+
+ partition@70000 {
+ label = "config";
+ reg = <0x070000 0x010000>;
+ };
+
+ partition@80000 {
+ label = "pot";
+ reg = <0x080000 0x010000>;
+ };
+
+ partition@90000 {
+ label = "firmware";
+ reg = <0x090000 0xf30000>;
+ compatible = "denx,uimage";
+ };
+
+ partition@fc0000 {
+ label = "language";
+ reg = <0xfc0000 0x040000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&caldata 0x1000>;
+ mtd-mac-address = <&caldata 0x06>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&caldata 0x00>;
+
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii-rxid";
+
+ pll-data = <0x86000000 0x80000101 0x80001313>;
+};
diff --git a/target/linux/ath79/dts/qca9558_ocedo_koala.dts b/target/linux/ath79/dts/qca9558_ocedo_koala.dts
new file mode 100644
index 0000000..aa3876a
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_ocedo_koala.dts
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ocedo,koala", "qca,qca9558";
+ model = "OCEDO Koala";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = ð0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "green:power";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wifi2 {
+ label = "yellow:wlan2";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wifi5 {
+ label = "red:wlan58";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_system: system {
+ label = "blue:sys";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0x740000>;
+ };
+
+ partition@790000 {
+ label = "vendor";
+ reg = <0x790000 0x740000>;
+ read-only;
+ };
+
+ partition@ed0000 {
+ label = "data";
+ reg = <0xed0000 0x110000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "id";
+ reg = <0xfe0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x06>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ eee-broken-100tx;
+ eee-broken-1000t;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x00>;
+
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii-rxid";
+
+ pll-data = <0x8e000000 0x80000101 0x80001313>;
+};
diff --git a/target/linux/ath79/dts/qca9558_ocedo_ursus.dts b/target/linux/ath79/dts/qca9558_ocedo_ursus.dts
new file mode 100644
index 0000000..dc8329f
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_ocedo_ursus.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ocedo,ursus", "qca,qca9558";
+ model = "OCEDO Ursus";
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi2 {
+ label = "green:wlan2g";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wifi5 {
+ label = "green:wlan5g";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0x740000>;
+ };
+
+ partition@790000 {
+ label = "vendor";
+ reg = <0x790000 0x740000>;
+ read-only;
+ };
+
+ partition@ed0000 {
+ label = "data";
+ reg = <0xed0000 0x110000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "id";
+ reg = <0xfe0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x06>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ at803x-override-sgmii-link-check;
+ };
+};
+
+ð0 {
+ status = "okay";
+ mtd-mac-address = <&art 0x00>;
+
+ phy-mode = "rgmii-rxid";
+ phy-handle = <&phy1>;
+ pll-data = <0x8e000000 0x80000101 0x80001313>;
+
+ gmac_config: gmac-config {
+ device = <&gmac>;
+
+ rxdv-delay = <3>;
+ rxd-delay = <3>;
+ txen-delay = <0>;
+ txd-delay = <0>;
+ rgmii-enabled = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+ mtd-mac-address = <&art 0x12>;
+ phy-handle = <&phy2>;
+ pll-data = <0x3000101 0x101 0x1313>;
+ qca955x-sgmii-fixup;
+};
diff --git a/target/linux/ath79/dts/qca9558_openmesh_mr.dtsi b/target/linux/ath79/dts/qca9558_openmesh_mr.dtsi
new file mode 100644
index 0000000..f4eed22
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_openmesh_mr.dtsi
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ /delete-property/ bootargs;
+ };
+
+ aliases {
+ serial0 = &uart;
+ led-boot = &led_power_blue;
+ led-failsafe = &led_power_blue;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_blue;
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan_blue {
+ label = "blue:lan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wifi2g: wifi2g {
+ label = "blue:wifi2g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ status_green {
+ label = "green:status";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+
+ status_red {
+ label = "red:status";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_blue: power_blue {
+ label = "blue:power";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_wifi5g: wifi5g {
+ label = "blue:wifi5g";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ /* hw_margin_ms is actually 300s but driver limits it to 60s */
+ hw_margin_ms = <60000>;
+ always-running;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ /* partitions are passed via bootloader */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ label = "custom";
+ reg = <0x050000 0x060000>;
+ read-only;
+ };
+
+ partition@b0000 {
+ label = "inactive";
+ reg = <0x0b0000 0x7a0000>;
+ };
+
+ partition@850000 {
+ label = "inactive2";
+ reg = <0x850000 0x7a0000>;
+ };
+
+ art: partition@ff0000 {
+ label = "ART";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x20>;
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ eee-broken-100tx;
+ eee-broken-1000t;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x82000000 0x80000101 0x80001313>;
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy5>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-enabled = <1>;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9558_openmesh_mr1750-v1.dts b/target/linux/ath79/dts/qca9558_openmesh_mr1750-v1.dts
new file mode 100644
index 0000000..11eb6df
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_openmesh_mr1750-v1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_openmesh_mr.dtsi"
+
+/ {
+ compatible = "openmesh,mr1750-v1", "qca,qca9558";
+ model = "OpenMesh MR1750 v1";
+};
+
+&led_wifi2g {
+ linux,default-trigger = "phy1tpt";
+};
+
+&led_wifi5g {
+ linux,default-trigger = "phy0tpt";
+};
diff --git a/target/linux/ath79/dts/qca9558_openmesh_mr1750-v2.dts b/target/linux/ath79/dts/qca9558_openmesh_mr1750-v2.dts
new file mode 100644
index 0000000..0271db0
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_openmesh_mr1750-v2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_openmesh_mr.dtsi"
+
+/ {
+ compatible = "openmesh,mr1750-v2", "qca,qca9558";
+ model = "OpenMesh MR1750 v2";
+};
+
+&led_wifi2g {
+ linux,default-trigger = "phy1tpt";
+};
+
+&led_wifi5g {
+ linux,default-trigger = "phy0tpt";
+};
diff --git a/target/linux/ath79/dts/qca9558_openmesh_mr900-v1.dts b/target/linux/ath79/dts/qca9558_openmesh_mr900-v1.dts
new file mode 100644
index 0000000..f7889b0
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_openmesh_mr900-v1.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_openmesh_mr.dtsi"
+
+/ {
+ compatible = "openmesh,mr900-v1", "qca,qca9558";
+ model = "OpenMesh MR900 v1";
+};
+
+&led_wifi2g {
+ linux,default-trigger = "phy0tpt";
+};
+
+&led_wifi5g {
+ linux,default-trigger = "phy1tpt";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "pci168c,0033";
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <16>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9558_openmesh_mr900-v2.dts b/target/linux/ath79/dts/qca9558_openmesh_mr900-v2.dts
new file mode 100644
index 0000000..1f54d21
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_openmesh_mr900-v2.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_openmesh_mr.dtsi"
+
+/ {
+ compatible = "openmesh,mr900-v2", "qca,qca9558";
+ model = "OpenMesh MR900 v2";
+};
+
+&led_wifi2g {
+ linux,default-trigger = "phy0tpt";
+};
+
+&led_wifi5g {
+ linux,default-trigger = "phy1tpt";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "pci168c,0033";
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <16>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v2.dts b/target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v2.dts
new file mode 100644
index 0000000..a478f04
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v2.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "openmesh,om5p-ac-v2", "qca,qca9558";
+ model = "OpenMesh OM5P-AC v2";
+
+ chosen {
+ /delete-property/ bootargs;
+ };
+
+ aliases {
+ serial0 = &uart;
+ led-boot = &led_power_blue;
+ led-failsafe = &led_power_blue;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_blue;
+ label-mac-device = ð0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi_green {
+ label = "green:wifi";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_power_blue: power_blue {
+ label = "blue:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wifi_yellow {
+ label = "yellow:wifi";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi_red {
+ label = "red:wifi";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH /* sda */
+ &gpio 18 GPIO_ACTIVE_HIGH /* scl */
+ >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,sda-open-drain;
+
+ tmp423a@4e {
+ compatible = "ti,tmp423";
+ reg = <0x4e>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ /* hw_margin_ms is actually 300s but driver limits it to 60s */
+ hw_margin_ms = <60000>;
+ always-running;
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio_pa_dcdc {
+ gpio-export,name = "om5pac:pa_dcdc";
+ gpio-export,output = <1>;
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ };
+ gpio_pa_high {
+ gpio-export,name = "om5pac:pa_high";
+ gpio-export,output = <1>;
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinmux {
+ pinmux_pa_dcdc_pins {
+ pinctrl-single,bits = <0x0 0x0 0xff0000>;
+ };
+
+ pinmux_pa_high_pins {
+ pinctrl-single,bits = <0x10 0x0 0xff>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ /* partitions are passed via bootloader */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ label = "custom";
+ reg = <0x050000 0x060000>;
+ read-only;
+ };
+
+ partition@b0000 {
+ label = "inactive";
+ reg = <0x0b0000 0x7a0000>;
+ };
+
+ partition@850000 {
+ label = "inactive2";
+ reg = <0x850000 0x7a0000>;
+ };
+
+ art: partition@ff0000 {
+ label = "ART";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x10>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ eee-broken-100tx;
+ eee-broken-1000t;
+ };
+};
+
+&mdio1 {
+ status = "okay";
+
+ phy-mask = <0x2>;
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ eee-broken-100tx;
+ eee-broken-1000t;
+ at803x-override-sgmii-link-check;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x82000101 0x80000101 0x80001313>;
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy4>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-enabled = <1>;
+ rxd-delay = <2>;
+ rxdv-delay = <2>;
+ txd-delay = <0>;
+ txen-delay = <0>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x80000101 0x80001313>;
+
+ mtd-mac-address = <&art 0x6>;
+
+ qca955x-sgmii-fixup;
+
+ phy-handle = <&phy1>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x0>;
+ mac-address-increment = <2>;
+};
diff --git a/target/linux/ath79/dts/qca9558_qxwlan_e558-v2-16m.dts b/target/linux/ath79/dts/qca9558_qxwlan_e558-v2-16m.dts
new file mode 100644
index 0000000..1df4c5e
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_qxwlan_e558-v2-16m.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_qxwlan_e558.dtsi"
+
+/ {
+ model = "Qxwlan E558 v2 16M";
+ compatible = "qxwlan,e558-v2-16m", "qca,qca9558";
+};
+
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0xf90000>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9558_qxwlan_e558-v2-8m.dts b/target/linux/ath79/dts/qca9558_qxwlan_e558-v2-8m.dts
new file mode 100644
index 0000000..30d17d5
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_qxwlan_e558-v2-8m.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_qxwlan_e558.dtsi"
+
+/ {
+ model = "Qxwlan E558 v2 8M";
+ compatible = "qxwlan,e558-v2-8m", "qca,qca9558";
+};
+
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0x790000>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9558_qxwlan_e558.dtsi b/target/linux/ath79/dts/qca9558_qxwlan_e558.dtsi
new file mode 100644
index 0000000..21946c4
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_qxwlan_e558.dtsi
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ sig1 {
+ label = "green:sig1";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ sig2 {
+ label = "green:sig2";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ pridata: partition@50000 {
+ label = "pri-data";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ art: partition@60000 {
+ label = "art";
+ reg = <0x060000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRAP */
+ 0x50 0xcc35cc35 /* LED_CTRL0 */
+ 0x54 0xca35ca35 /* LED_CTRL1 */
+ 0x58 0xc935c935 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x56000000 0x00000101 0x00001616>;
+
+ phy-handle = <&phy0>;
+
+ mtd-mac-address = <&pridata 0x400>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&pridata 0x400>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9558_sitecom_wlr-8100.dts b/target/linux/ath79/dts/qca9558_sitecom_wlr-8100.dts
new file mode 100644
index 0000000..eee3e39
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_sitecom_wlr-8100.dts
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Sitecom WLR-8100 (X8 AC1750)";
+ compatible = "sitecom,wlr-8100", "qca,qca9558";
+
+ aliases {
+ led-boot = &led_status_amber;
+ led-failsafe = &led_status_amber;
+ led-running = &led_status_amber;
+ led-upgrade = &led_status_amber;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wifi2g_rfkill {
+ label = "2.4GHz - RFKILL";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+
+ wifi5g_restart {
+ label = "5GHz - RESTART";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_amber: status_amber {
+ label = "amber:status";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ ops {
+ label = "white:ops";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi2g {
+ label = "blue:wifi2g";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wifi5g {
+ label = "blue:wifi5g";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x030000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x030000 0x010000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x040000 0xf10000>;
+ };
+
+ partition@f50000 {
+ label = "manufacture";
+ reg = <0xf50000 0x040000>;
+ read-only;
+ };
+
+ partition@f90000 {
+ label = "backup";
+ reg = <0xf90000 0x010000>;
+ read-only;
+ };
+
+ partition@fa0000 {
+ label = "storage";
+ reg = <0xfa0000 0x050000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x87600000 /* PORT0 PAD MODE CTRL */
+ 0x50 0xcf37cf37 /* LED Control Register 0 */
+ 0x54 0x00000000 /* LED Control Register 1 */
+ 0x58 0x00000000 /* LED Control Register 2 */
+ 0x5c 0x0030c300 /* LED Control Register 3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ pll-data = <0xa6000000 0x00000101 0x00001616>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-enabled = <1>;
+ };
+};
+
+&wmac {
+ status = "okay";
+ qca,no-eeprom;
+};
diff --git a/target/linux/ath79/dts/qca9558_tplink_archer-c.dtsi b/target/linux/ath79/dts/qca9558_tplink_archer-c.dtsi
new file mode 100644
index 0000000..52cbb5d
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_tplink_archer-c.dtsi
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = ð1;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ usb1 {
+ label = "green:usb1";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ usb2 {
+ label = "green:usb2";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ qss {
+ label = "green:qss";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys: keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_usb1_power {
+ gpio-export,name = "tp-link:power:usb1";
+ gpio-export,output = <1>;
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_usb2_power {
+ gpio-export,name = "tp-link:power:usb2";
+ gpio-export,output = <1>;
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ mtdparts: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+ 0x50 0xc737c737 /* LED_CTRL0 */
+ 0x54 0x00000000 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x0030c300 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+ phy-handle = <&phy0>;
+ pll-data = <0x56000000 0x00000101 0x00001616>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-enabled = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/qca9558_tplink_archer-c5-v1.dts b/target/linux/ath79/dts/qca9558_tplink_archer-c5-v1.dts
new file mode 100644
index 0000000..9ffbce0
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_tplink_archer-c5-v1.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_tplink_archer-c.dtsi"
+
+/ {
+ compatible = "tplink,archer-c5-v1", "qca,qca9558";
+ model = "TP-Link Archer C5 v1";
+};
+
+&keys {
+ rfkill {
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+};
+
+&leds {
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+};
+
+&mtdparts {
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0xfd0000>;
+ compatible = "tplink,firmware";
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9558_tplink_archer-c7-v1.dts b/target/linux/ath79/dts/qca9558_tplink_archer-c7-v1.dts
new file mode 100644
index 0000000..e2d1d63
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_tplink_archer-c7-v1.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_tplink_archer-c.dtsi"
+
+/ {
+ compatible = "tplink,archer-c7-v1", "qca,qca9558";
+ model = "TP-Link Archer C7 v1";
+};
+
+&keys {
+ rfkill {
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+};
+
+&leds {
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+};
+
+&mtdparts {
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ compatible = "tplink,firmware";
+ reg = <0x020000 0x7d0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9558_tplink_archer-c7-v2.dts b/target/linux/ath79/dts/qca9558_tplink_archer-c7-v2.dts
new file mode 100644
index 0000000..be99b8e
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_tplink_archer-c7-v2.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_tplink_archer-c.dtsi"
+
+/ {
+ compatible = "tplink,archer-c7-v2", "qca,qca9558";
+ model = "TP-Link Archer C7 v2";
+};
+
+&keys {
+ rfkill {
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+};
+
+&leds {
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+};
+
+&mtdparts {
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0xfd0000>;
+ compatible = "tplink,firmware";
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9558_tplink_archer-d7-v1.dts b/target/linux/ath79/dts/qca9558_tplink_archer-d7-v1.dts
new file mode 100644
index 0000000..fd1717b
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_tplink_archer-d7-v1.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_tplink_archer-d7.dtsi"
+
+/ {
+ compatible = "tplink,archer-d7-v1", "qca,qca9558";
+ model = "TP-Link Archer D7 v1";
+
+ aliases {
+ label-mac-device = &wmac;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0xf90000>;
+ };
+
+ partition@fb0000 {
+ label = "radioDECT";
+ reg = <0xfb0000 0x010000>;
+ read-only;
+ };
+
+ partition@fc0000 {
+ label = "config";
+ reg = <0xfc0000 0x010000>;
+ read-only;
+ };
+
+ romfs: partition@fd0000 {
+ label = "romfs";
+ reg = <0xfd0000 0x010000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "rom";
+ reg = <0xfe0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ mtd-mac-address = <&romfs 0xf100>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ mtd-mac-address = <&romfs 0xf100>;
+};
+
+&wmac {
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&romfs 0xf100>;
+};
diff --git a/target/linux/ath79/dts/qca9558_tplink_archer-d7.dtsi b/target/linux/ath79/dts/qca9558_tplink_archer-d7.dtsi
new file mode 100644
index 0000000..f9e8adc
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_tplink_archer-d7.dtsi
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "white:system";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan {
+ label = "white:wlan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "white:lan";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "white:usb";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port1>, <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+
+ qss {
+ label = "white:qss";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wifi {
+ label = "WiFi button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_usb0_vbus: regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb1_vbus: regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+ 0x50 0xc737c737 /* LED_CTRL0 */
+ 0x54 0x00000000 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x0030c300 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy0>;
+ pll-data = <0x56000000 0x00000101 0x00001616>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-enabled = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&wmac {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dr_mode = "host";
+ vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dr_mode = "host";
+ vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9558_tplink_archer-d7b-v1.dts b/target/linux/ath79/dts/qca9558_tplink_archer-d7b-v1.dts
new file mode 100644
index 0000000..d2ef7e8
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_tplink_archer-d7b-v1.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_tplink_archer-d7.dtsi"
+
+/ {
+ compatible = "tplink,archer-d7b-v1", "qca,qca9558";
+ model = "TP-Link Archer D7b v1";
+
+ aliases {
+ label-mac-device = &wmac;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0xfa0000>;
+ };
+
+ partition@fc0000 {
+ label = "config";
+ reg = <0xfc0000 0x010000>;
+ read-only;
+ };
+
+ romfs: partition@fd0000 {
+ label = "romfs";
+ reg = <0xfd0000 0x010000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "reserve";
+ reg = <0xfe0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ mtd-mac-address = <&romfs 0xf100>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ mtd-mac-address = <&romfs 0xf100>;
+};
+
+&wmac {
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&romfs 0xf100>;
+};
diff --git a/target/linux/ath79/dts/qca9558_tplink_re350k-v1.dts b/target/linux/ath79/dts/qca9558_tplink_re350k-v1.dts
new file mode 100644
index 0000000..c0fbeb5
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_tplink_re350k-v1.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "TP-Link RE350K v1";
+ compatible = "tplink,re350k-v1", "qca,qca9558";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ mdio-gpio0 = &mdio2;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ app-config {
+ label = "app-config";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ led {
+ label = "led";
+ linux,code = <BTN_1>;
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g_green {
+ label = "green:wlan2g";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan2g_red {
+ label = "red:wlan2g";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g_green {
+ label = "green:wlan5g";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g_red {
+ label = "red:wlan5g";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ mdio2: mdio {
+ compatible = "virtual,mdio-gpio";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpios = <&gpio 23 GPIO_ACTIVE_HIGH>,
+ <&gpio 18 GPIO_ACTIVE_HIGH>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+
+ phy-mode = "rgmii-rxid";
+ eee-broken-100tx;
+ eee-broken-1000t;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy4>;
+ pll-data = <0x9e000000 0x80000101 0x80001313>;
+
+ mtd-mac-address = <&info 0x8>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ rxdv-delay = <2>;
+ rxd-delay = <2>;
+ txen-delay = <0>;
+ txd-delay = <0>;
+ rgmii-enabled = <1>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0xd70000>;
+ };
+
+ partition@d90000 {
+ label = "partition-table";
+ reg = <0xd90000 0x010000>;
+ read-only;
+ };
+
+ info: partition@da0000 {
+ label = "info";
+ reg = <0xda0000 0x020000>;
+ read-only;
+ };
+
+ partition@dc0000 {
+ label = "config";
+ reg = <0xdc0000 0x230000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/dts/qca9558_tplink_re355-v1.dts b/target/linux/ath79/dts/qca9558_tplink_re355-v1.dts
new file mode 100644
index 0000000..f8ad48c
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_tplink_re355-v1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_tplink_rex5x.dtsi"
+
+/ {
+ compatible = "tplink,re355-v1", "qca,qca9558";
+ model = "TP-Link RE355 v1";
+};
diff --git a/target/linux/ath79/dts/qca9558_tplink_re450-v1.dts b/target/linux/ath79/dts/qca9558_tplink_re450-v1.dts
new file mode 100644
index 0000000..86d7be5
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_tplink_re450-v1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_tplink_rex5x.dtsi"
+
+/ {
+ compatible = "tplink,re450-v1", "qca,qca9558";
+ model = "TP-Link RE450 v1";
+};
diff --git a/target/linux/ath79/dts/qca9558_tplink_rex5x.dtsi b/target/linux/ath79/dts/qca9558_tplink_rex5x.dtsi
new file mode 100644
index 0000000..6c487f1
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_tplink_rex5x.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ mdio-gpio0 = &mdio2;
+ label-mac-device = ð0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "blue:power";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "blue:wlan2g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "blue:wlan5g";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan_link {
+ label = "green:lan_link";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+
+ lan_data {
+ label = "green:lan_data";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wps_blue {
+ label = "blue:wps";
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps_red {
+ label = "red:wps";
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ leds {
+ label = "LED control button";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ mdio2: mdio {
+ compatible = "virtual,mdio-gpio";
+
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
+ <&gpio 1 GPIO_ACTIVE_HIGH>; /* MDIO */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x5e0000>;
+ };
+
+ partition@600000 {
+ label = "partition-table";
+ reg = <0x600000 0x010000>;
+ read-only;
+ };
+
+ info: partition@610000 {
+ label = "info";
+ reg = <0x610000 0x020000>;
+ read-only;
+ };
+
+ partition@630000 {
+ label = "config";
+ reg = <0x630000 0x1c0000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy4>;
+ pll-data = <0xa6000000 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&info 0x8>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+ mtd-mac-address-increment = <(-1)>;
+};
diff --git a/target/linux/ath79/dts/qca9558_tplink_tl-wdr4900-v2.dts b/target/linux/ath79/dts/qca9558_tplink_tl-wdr4900-v2.dts
new file mode 100644
index 0000000..0099592
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_tplink_tl-wdr4900-v2.dts
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wdr4900-v2", "qca,qca9558";
+ model = "TP-Link TL-WDR4900 v2";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = ð1;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "blue:system";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ usb1 {
+ label = "green:usb1";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ usb2 {
+ label = "green:usb2";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+
+ wlan2g {
+ label = "blue:wlan2g";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ qss {
+ label = "blue:qss";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan5g {
+ label = "blue:wlan5g";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_usb1_power {
+ gpio-export,name = "tp-link:power:usb1";
+ gpio-export,output = <1>;
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_usb2_power {
+ gpio-export,name = "tp-link:power:usb2";
+ gpio-export,output = <1>;
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,0033";
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-2)>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x7d0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+ 0x50 0xc737c737 /* LED_CTRL0 */
+ 0x54 0x00000000 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x0030c300 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+ phy-handle = <&phy0>;
+ pll-data = <0x56000000 0x00000101 0x00001616>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-enabled = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+};
diff --git a/target/linux/ath79/dts/qca9558_tplink_tl-wdr7500-v3.dts b/target/linux/ath79/dts/qca9558_tplink_tl-wdr7500-v3.dts
new file mode 100644
index 0000000..04368b9
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_tplink_tl-wdr7500-v3.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_tplink_archer-c.dtsi"
+
+/ {
+ compatible = "tplink,tl-wdr7500-v3", "qca,qca9558";
+ model = "TP-Link TL-WDR7500 v3";
+};
+
+&keys {
+ rfkill {
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+};
+
+&leds {
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+};
+
+&mtdparts {
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ compatible = "tplink,firmware";
+ reg = <0x020000 0x7d0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd-v2.dts b/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd-v2.dts
new file mode 100644
index 0000000..37b81b7
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd-v2.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_tplink_tl-wr1043nd.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr1043nd-v2", "qca,qca9558";
+ model = "TP-Link TL-WR1043ND v2";
+};
diff --git a/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd-v3.dts b/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd-v3.dts
new file mode 100644
index 0000000..474fd8e
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd-v3.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_tplink_tl-wr1043nd.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr1043nd-v3", "qca,qca9558";
+ model = "TP-Link TL-WR1043ND v3";
+};
diff --git a/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi b/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
new file mode 100644
index 0000000..959d5c3
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = &wmac;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ usb {
+ label = "green:usb";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+
+ wifi_green {
+ label = "green:wlan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi_wps {
+ label = "green:wps";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wifi {
+ label = "RFKILL button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio_usb_power {
+ gpio-export,name = "tp-link:power:usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <33400000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x7d0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRAP */
+ 0x50 0xcc35cc35 /* LED_CTRL0 */
+ 0x54 0xca35ca35 /* LED_CTRL1 */
+ 0x58 0xc935c935 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x56000000 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+ phy-handle = <&phy0>;
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/qca9558_tplink_tl-wr1045nd-v2.dts b/target/linux/ath79/dts/qca9558_tplink_tl-wr1045nd-v2.dts
new file mode 100644
index 0000000..86d0a39
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_tplink_tl-wr1045nd-v2.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_tplink_tl-wr1043nd.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr1045nd-v2", "qca,qca9558";
+ model = "TP-Link TL-WR1045ND v2";
+};
diff --git a/target/linux/ath79/dts/qca9558_tplink_tl-wr941n-v7-cn.dts b/target/linux/ath79/dts/qca9558_tplink_tl-wr941n-v7-cn.dts
new file mode 100644
index 0000000..058acda
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_tplink_tl-wr941n-v7-cn.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wr941n-v7-cn", "qca,qca9558";
+ model = "TP-Link TL-WR941N v7 (CN)";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = ð0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ qss {
+ label = "green:qss";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "qss";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x3d0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x3f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ switch0@1f {
+ compatible = "qca,ar8236";
+ reg = <0x1f>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ phy-mode = "mii";
+ mtd-mac-address = <&uboot 0x1fc00>;
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/qca9558_trendnet_tew-823dru.dts b/target/linux/ath79/dts/qca9558_trendnet_tew-823dru.dts
new file mode 100644
index 0000000..22569bf
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_trendnet_tew-823dru.dts
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "trendnet,tew-823dru", "qca,qca9558";
+ model = "TRENDNET TEW-823DRU";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_orange {
+ label = "orange:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+
+ planet_green {
+ label = "green:planet";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ planet_orange {
+ label = "orange:planet";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x030000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "nvram";
+ reg = <0x030000 0x010000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x040000 0xef0000>;
+ };
+
+ partition@f30000 {
+ label = "lang";
+ reg = <0xf30000 0x030000>;
+ read-only;
+ };
+
+ partition@f60000 {
+ label = "my-dlink";
+ reg = <0xf60000 0x080000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "mac";
+ reg = <0xfe0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRAP */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy0>;
+ pll-data = <0x56000000 0x00000101 0x00001616>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-enabled = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9558_ubnt_powerbeam-5ac-500.dts b/target/linux/ath79/dts/qca9558_ubnt_powerbeam-5ac-500.dts
new file mode 100644
index 0000000..3d90531
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_ubnt_powerbeam-5ac-500.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "qca955x_ubnt_xc.dtsi"
+
+/ {
+ compatible = "ubnt,powerbeam-5ac-500", "ubnt,xc", "qca,qca9558";
+ model = "Ubiquiti PowerBeam 5AC 500";
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <4>;
+ phy4: ethernet-phy@4 {
+ phy-mode = "sgmii";
+ reg = <4>;
+ at803x-override-sgmii-link-check;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+ phy-mode = "sgmii";
+ phy-handle = <&phy4>;
+};
diff --git a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
new file mode 100644
index 0000000..9aee8c3
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x_zyxel_nbg6x16.dtsi"
+
+/ {
+ compatible = "zyxel,nbg6716", "qca,qca9558";
+ model = "ZyXEL NBG6716";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "white:power";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ internet {
+ label = "white:internet";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+
+ usb1 {
+ label = "white:usb1";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port1>;
+ };
+
+ usb2 {
+ label = "white:usb2";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port0>;
+ };
+
+ wifi2g {
+ label = "white:wifi2g";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wifi5g {
+ label = "white:wifi5g";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wps {
+ label = "white:wps";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&keys {
+ usb1 {
+ label = "USB1 eject button";
+ linux,code = <BTN_1>;
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ usb2 {
+ label = "USB2 eject button";
+ linux,code = <BTN_2>;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+};
+
+&gpio_usb_power {
+ line-name = "nbg6716:power:usb";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ uboot_env: partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "nbu";
+ reg = <0x060000 0xfa0000>;
+ };
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "zyxel_rfsd";
+ reg = <0x0 0x200000>;
+ };
+
+ partition@200000 {
+ label = "romd";
+ reg = <0x200000 0x200000>;
+ };
+
+ partition@400000 {
+ label = "header";
+ reg = <0x400000 0x100000>;
+ };
+
+ firmware@500000 {
+ label = "firmware";
+ reg = <0x500000 0x7b00000>;
+ };
+
+ partition@500000 {
+ label = "kernel";
+ reg = <0x500000 0x400000>;
+ };
+
+ partition@900000 {
+ label = "ubi";
+ reg = <0x900000 0x7700000>;
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+ qcom,ath10k-calibration-variant = "ZyXEL-NBG6716";
+ };
+};
diff --git a/target/linux/ath79/dts/qca955x.dtsi b/target/linux/ath79/dts/qca955x.dtsi
new file mode 100644
index 0000000..385cbd9
--- /dev/null
+++ b/target/linux/ath79/dts/qca955x.dtsi
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ath79.dtsi"
+
+/ {
+ compatible = "qca,qca9550";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips74Kc";
+ clocks = <&pll ATH79_CLK_CPU>;
+ reg = <0>;
+ };
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <40000000>;
+ };
+
+ ahb {
+ apb {
+ ddr_ctrl: memory-controller@18000000 {
+ compatible = "qca,qca9550-ddr-controller",
+ "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x100>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ uart: uart@18020000 {
+ compatible = "ns16550a";
+ reg = <0x18020000 0x20>;
+
+ interrupts = <3>;
+
+ clocks = <&pll ATH79_CLK_REF>;
+ clock-names = "uart";
+
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ no-loopback-test;
+ };
+
+ usb_phy0: usb-phy0@18030000 {
+ compatible ="qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
+ reg = <0x18030000 4>, <0x18030004 4>;
+
+ reset-names = "usb-phy", "usb-suspend-override";
+ resets = <&rst 4>, <&rst 3>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_phy1: usb-phy1@18030010 {
+ compatible = "qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
+ reg = <0x18030010 4>, <0x18030014 4>;
+
+ reset-names = "usb-phy", "usb-suspend-override";
+ resets = <&rst2 4>, <&rst2 3>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ gpio: gpio@18040000 {
+ compatible = "qca,qca9550-gpio",
+ "qca,ar9340-gpio";
+ reg = <0x18040000 0x28>;
+
+ interrupts = <2>;
+ ngpios = <24>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pinmux: pinmux@1804002c {
+ compatible = "pinctrl-single";
+
+ reg = <0x1804002c 0x44>;
+
+ #size-cells = <0>;
+
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x1>;
+ #pinctrl-cells = <2>;
+
+ jtag_disable_pins: pinmux_jtag_disable_pins {
+ pinctrl-single,bits = <0x40 0x2 0x2>;
+ };
+ };
+
+ pll: pll-controller@18050000 {
+ compatible = "qca,qca9550-pll",
+ "qca,qca9550-pll", "syscon";
+ reg = <0x18050000 0x50>;
+
+ #clock-cells = <1>;
+ clock-output-names = "cpu", "ddr", "ahb";
+
+ clocks = <&extosc>;
+ };
+
+ wdt: wdt@18060008 {
+ compatible = "qca,ar7130-wdt";
+ reg = <0x18060008 0x8>;
+
+ interrupts = <4>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "wdt";
+ };
+
+ rst: reset-controller@1806001c {
+ compatible = "qca,qca9550-reset",
+ "qca,ar7100-reset";
+ reg = <0x1806001c 0x4>;
+
+ #reset-cells = <1>;
+ interrupt-parent = <&cpuintc>;
+
+ intc2: interrupt-controller2 {
+ compatible = "qca,ar9340-intc";
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ qca,int-status-addr = <0xac>;
+ qca,pending-bits = <0xf>, /* wmac */
+ <0x1f0>; /* pcie rc 0 */
+ };
+
+ intc3: interrupt-controller3 {
+ compatible = "qca,ar9340-intc";
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <3>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ qca,int-status-addr = <0xac>;
+ qca,pending-bits = <0x1f000>, /* pcie rc 1 */
+ <0x1000000>, /* usb1 */
+ <0x10000000>; /* usb2 */
+ };
+ };
+
+ rst2: reset-controller@180600c0 {
+ compatible = "qca,qca9550-reset",
+ "qca,ar7100-reset",
+ "simple-bus";
+ reg = <0x180600c0 0x4>;
+
+ #reset-cells = <1>;
+ };
+ };
+
+ gmac: gmac@18070000 {
+ compatible = "qca,qca9550-gmac";
+ reg = <0x18070000 0x58>;
+ };
+
+ pcie0: pcie-controller@180c0000 {
+ compatible = "qcom,qca9550-pci", "qcom,ar7240-pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0x0>;
+ reg = <0x180c0000 0x1000>, /* CRP */
+ <0x180f0000 0x100>, /* CTRL */
+ <0x14000000 0x1000>; /* CFG */
+ reg-names = "crp_base", "ctrl_base", "cfg_base";
+ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x02000000 /* pci memory */
+ 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
+ interrupt-parent = <&intc2>;
+ interrupts = <1>;
+
+ resets = <&rst 6>, <&rst 7>;
+ reset-names = "hc", "phy";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-map-mask = <0 0 0 1>;
+ interrupt-map = <0 0 0 0 &pcie0 0>;
+ status = "disabled";
+ };
+
+ wmac: wmac@18100000 {
+ compatible = "qca,qca9550-wmac";
+ reg = <0x18100000 0x10000>;
+
+ interrupt-parent = <&intc2>;
+ interrupts = <0>;
+
+ status = "disabled";
+ };
+
+ pcie1: pcie-controller@18250000 {
+ compatible = "qcom,qca9550-pci", "qcom,ar7240-pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0x0>;
+ reg = <0x18250000 0x1000>, /* CRP */
+ <0x18280000 0x100>, /* CTRL */
+ <0x16000000 0x1000>; /* CFG */
+ reg-names = "crp_base", "ctrl_base", "cfg_base";
+ ranges = <0x2000000 0 0x12000000 0x12000000 0 0x02000000 /* pci memory */
+ 0x1000000 0 0x00000000 0x0000001 0 0x000001>; /* io space */
+ interrupt-parent = <&intc3>;
+ interrupts = <0>;
+
+ resets = <&rst2 6>, <&rst2 7>;
+ reset-names = "hc", "phy";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-map-mask = <0 0 0 1>;
+ interrupt-map = <0 0 0 0 &pcie1 0>;
+ status = "disabled";
+ };
+
+ usb0: usb@1b000000 {
+ compatible = "generic-ehci";
+ reg = <0x1b000000 0x1fc>;
+
+ interrupt-parent = <&intc3>;
+ interrupts = <1>;
+ resets = <&rst 5>;
+ reset-names = "usb-host";
+
+ has-transaction-translator;
+ caps-offset = <0x100>;
+
+ phy-names = "usb-phy0";
+ phys = <&usb_phy0>;
+
+ status = "disabled";
+ };
+
+ usb1: usb@1b400000 {
+ compatible = "generic-ehci";
+ reg = <0x1b400000 0x1fc>;
+
+ interrupt-parent = <&intc3>;
+ interrupts = <2>;
+ resets = <&rst2 5>;
+ reset-names = "usb-host";
+
+ has-transaction-translator;
+ caps-offset = <0x100>;
+
+ phy-names = "usb-phy1";
+ phys = <&usb_phy1>;
+
+ status = "disabled";
+ };
+
+ nand: nand@1b800200 {
+ compatible = "qca,ar934x-nand";
+ reg = <0x1b800200 0xb8>;
+
+ interrupts = <21>;
+ interrupt-parent = <&miscintc>;
+
+ resets = <&rst 14>;
+ reset-names = "nand";
+
+ nand-ecc-mode = "hw";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi: spi@1f000000 {
+ compatible = "qca,ar934x-spi";
+ reg = <0x1f000000 0x1c>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&mdio0 {
+ compatible = "qca,ar9340-mdio";
+};
+
+ð0 {
+ compatible = "qca,qca9550-eth", "syscon";
+
+ pll-reg = <0 0x28 0>;
+ pll-handle = <&pll>;
+
+ pll-data = <0x16000000 0x00000101 0x00001616>;
+ phy-mode = "rgmii";
+
+ resets = <&rst 9>, <&rst 22>;
+ reset-names = "mac", "mdio";
+};
+
+&mdio1 {
+ compatible = "qca,ar9340-mdio";
+};
+
+ð1 {
+ compatible = "qca,qca9550-eth", "syscon";
+
+ pll-reg = <0 0x48 0>;
+ pll-handle = <&pll>;
+
+ pll-data = <0x16000000 0x00000101 0x00001616>;
+ phy-mode = "sgmii";
+
+ resets = <&rst 13>, <&rst 23>;
+ reset-names = "mac", "mdio";
+};
diff --git a/target/linux/ath79/dts/qca955x_dlink_dap-2xxx.dtsi b/target/linux/ath79/dts/qca955x_dlink_dap-2xxx.dtsi
new file mode 100644
index 0000000..1047dfd
--- /dev/null
+++ b/target/linux/ath79/dts/qca955x_dlink_dap-2xxx.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "bdcfg";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "rgdb";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "unused";
+ reg = <0x60000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca955x_engenius_ecb1xxx.dtsi b/target/linux/ath79/dts/qca955x_engenius_ecb1xxx.dtsi
new file mode 100644
index 0000000..e448cd3
--- /dev/null
+++ b/target/linux/ath79/dts/qca955x_engenius_ecb1xxx.dtsi
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ debounce-interval = <60>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "amber:power";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wifi2g {
+ label = "blue:wifi2g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wifi5g {
+ label = "blue:wifi5g";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xf50000>;
+ };
+
+ partition@fa0000 {
+ label = "userconfig";
+ reg = <0xfa0000 0x050000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ eee-broken-100tx;
+ eee-broken-1000t;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii-id";
+
+ pll-data = <0x82000000 0x80000101 0x80001313>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-enabled = <1>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ wifi@0,0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0x0 0 0 0 0>;
+ qca,no-eeprom;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ qca,no-eeprom;
+};
diff --git a/target/linux/ath79/dts/qca955x_senao_loader.dtsi b/target/linux/ath79/dts/qca955x_senao_loader.dtsi
new file mode 100644
index 0000000..ac9f03e
--- /dev/null
+++ b/target/linux/ath79/dts/qca955x_senao_loader.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+ virtual_flash {
+ compatible = "mtd-concat";
+
+ devices = <&fwconcat0 &fwconcat1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <0x73714f4b>;
+ label = "firmware";
+ reg = <0x0 0x0>;
+ };
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ wifi@0,0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0x0 0 0 0 0>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ label = "custom";
+ reg = <0x050000 0x050000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "loader";
+ reg = <0x0a0000 0x010000>;
+ };
+
+ fwconcat1: partition@b0000 {
+ label = "fwconcat1";
+ reg = <0x0b0000 0x170000>;
+ };
+
+ fwconcat0: partition@220000 {
+ label = "fwconcat0";
+ reg = <0x220000 0xb50000>;
+ };
+
+ partition@d70000 {
+ label = "failsafe";
+ reg = <0xd70000 0x280000>;
+ read-only;
+ };
+
+ /* additional partitions in device DTS files */
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca955x_ubnt_xc.dtsi b/target/linux/ath79/dts/qca955x_ubnt_xc.dtsi
new file mode 100644
index 0000000..0f80394
--- /dev/null
+++ b/target/linux/ath79/dts/qca955x_ubnt_xc.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xf60000>;
+ };
+
+ partition@fb0000 {
+ label = "cfg";
+ reg = <0xfb0000 0x040000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca955x_zyxel_nbg6x16.dtsi b/target/linux/ath79/dts/qca955x_zyxel_nbg6x16.dtsi
new file mode 100644
index 0000000..9e1ce89
--- /dev/null
+++ b/target/linux/ath79/dts/qca955x_zyxel_nbg6x16.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ keys: keys {
+ compatible = "gpio-keys";
+
+ wifi {
+ label = "WiFi on/off button";
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&gpio {
+ gpio_usb_power: usb_power {
+ gpio-hog;
+ gpios = <16 0>;
+ output-high;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy17: ethernet-phy@11 {
+ reg = <0x11>;
+ phy-mode = "rgmii-id";
+ };
+
+ switch0@1f {
+ compatible = "qca,ar8327";
+ reg = <0x1f>;
+ qca,ar8327-initvals = <
+ 0x04 0x87600000 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRAP */
+ 0x50 0xffb7ffb7 /* LED_CTRL0 */
+ 0x54 0xffb7ffb7 /* LED_CTRL1 */
+ 0x58 0xffb7ffb7 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+&mdio1 {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "sgmii";
+ };
+};
+
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0xa6000000 0x00000101 0x00001616>;
+ phy-handle = <&phy17>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+ phy-handle = <&phy1>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+};
+
+&usb1 {
+ status = "okay";
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9561_avm_fritz4020.dts b/target/linux/ath79/dts/qca9561_avm_fritz4020.dts
new file mode 100644
index 0000000..7c220ba
--- /dev/null
+++ b/target/linux/ath79/dts/qca9561_avm_fritz4020.dts
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "avm,fritz4020", "qca,qca9560";
+ model = "AVM FRITZ!Box 4020";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_info_red;
+ led-running = &led_power;
+ led-upgrade = &led_info_red;
+ };
+
+ led_spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <0>;
+
+ led_gpio: led_gpio@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <1>;
+ spi-max-frequency = <10000000>;
+
+ gpio_latch_bit {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "gpio-latch-bit";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ info {
+ label = "green:info";
+ gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led_info_red: info_red {
+ label = "red:info";
+ gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "WLAN button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "urlader";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@1 {
+ compatible = "avm,eva-firmware";
+ label = "firmware";
+ reg = <0x020000 0xee0000>;
+ };
+
+ partition@2 {
+ label = "tffs (1)";
+ reg = <0xf00000 0x080000>;
+ read-only;
+ };
+
+ partition@3 {
+ label = "tffs (2)";
+ reg = <0xf80000 0x080000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <1>;
+ switch-phy-swap = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ qca,no-eeprom;
+};
diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts b/target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts
new file mode 100644
index 0000000..bf744f1
--- /dev/null
+++ b/target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,archer-c25-v1", "qca,qca9561";
+ model = "TP-Link Archer C25 v1";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ label-mac-device = ð0;
+ };
+
+ led_spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+
+ led_gpio: led_gpio@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <1>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wifi {
+ label = "WiFi button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wps {
+ label = "green:wps";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wan_green {
+ label = "green:wan";
+ gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "green:lan2";
+ gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "green:lan3";
+ gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "green:lan4";
+ gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "factory-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot";
+ reg = <0x020000 0x010000>;
+ read-only;
+ };
+
+ partition@30000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x030000 0x7a0000>;
+ };
+
+ config: partition@7d0000 {
+ label = "config";
+ reg = <0x7d0000 0x010000>;
+ read-only;
+ };
+
+ info: partition@7e0000 {
+ label = "info";
+ reg = <0x7e0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&info 0x8>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&info 0x8>;
+ mtd-mac-address-increment = <1>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c58-v1.dts b/target/linux/ath79/dts/qca9561_tplink_archer-c58-v1.dts
new file mode 100644
index 0000000..ea86b8f
--- /dev/null
+++ b/target/linux/ath79/dts/qca9561_tplink_archer-c58-v1.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9561_tplink_archer-c5x.dtsi"
+
+/ {
+ compatible = "tplink,archer-c58-v1", "qca,qca9560";
+ model = "TP-Link Archer C58 v1";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ info: partition@10000 {
+ label = "info";
+ reg = <0x010000 0x010000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x020000 0x7c0000>;
+ };
+
+ partition@7e0000 {
+ label = "tplink";
+ reg = <0x7e0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c59-v1.dts b/target/linux/ath79/dts/qca9561_tplink_archer-c59-v1.dts
new file mode 100644
index 0000000..07e8379
--- /dev/null
+++ b/target/linux/ath79/dts/qca9561_tplink_archer-c59-v1.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9561_tplink_archer-c5x.dtsi"
+
+/ {
+ compatible = "tplink,archer-c59-v1", "qca,qca9560";
+ model = "TP-Link Archer C59 v1";
+};
+
+&leds {
+ usb {
+ label = "green:usb";
+ gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port>;
+ };
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ info: partition@10000 {
+ label = "info";
+ reg = <0x010000 0x010000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x020000 0xe30000>;
+ };
+
+ partition@e50000 {
+ label = "tplink";
+ reg = <0xe50000 0x1a0000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c59-v2.dts b/target/linux/ath79/dts/qca9561_tplink_archer-c59-v2.dts
new file mode 100644
index 0000000..c1321f5
--- /dev/null
+++ b/target/linux/ath79/dts/qca9561_tplink_archer-c59-v2.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9561_tplink_archer-c5x.dtsi"
+
+/ {
+ compatible = "tplink,archer-c59-v2", "qca,qca9560";
+ model = "TP-Link Archer C59 v2";
+};
+
+&leds {
+ usb {
+ label = "green:usb";
+ gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port>;
+ };
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "factory-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot";
+ reg = <0x020000 0x010000>;
+ read-only;
+ };
+
+ info: partition@30000 {
+ label = "info";
+ reg = <0x030000 0x010000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x040000 0xe10000>;
+ };
+
+ partition@e50000 {
+ label = "tplink";
+ reg = <0xe50000 0x1a0000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c5x.dtsi b/target/linux/ath79/dts/qca9561_tplink_archer-c5x.dtsi
new file mode 100644
index 0000000..6640329
--- /dev/null
+++ b/target/linux/ath79/dts/qca9561_tplink_archer-c5x.dtsi
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,archer-c5x", "qca,qca9560";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ label-mac-device = ð1;
+ };
+
+ led_spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+
+ led_gpio: led_gpio@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <1>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wan_green {
+ label = "green:wan";
+ gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "green:wps";
+ gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "WiFi button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_shift_register_oe {
+ gpio-export,name = "tp-link:oe:sr";
+ gpio-export,output = <0>;
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_shift_register_reset {
+ gpio-export,name = "tp-link:reset:sr";
+ gpio-export,output = <1>;
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ mtd-mac-address = <&info 0x8>;
+ mtd-mac-address-increment = <1>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <1>;
+ switch-phy-swap = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&info 0x8>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c60-v1.dts b/target/linux/ath79/dts/qca9561_tplink_archer-c60-v1.dts
new file mode 100644
index 0000000..a3bbf3e
--- /dev/null
+++ b/target/linux/ath79/dts/qca9561_tplink_archer-c60-v1.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9561_tplink_archer-c6x.dtsi"
+
+/ {
+ compatible = "tplink,archer-c60-v1", "qca,qca9561";
+ model = "TP-Link Archer C60 v1";
+};
+
+&leds {
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "green:wps";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ info: partition@10000 {
+ label = "info";
+ reg = <0x010000 0x010000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x020000 0x7c0000>;
+ };
+
+ partition@7e0000 {
+ label = "tplink";
+ reg = <0x7e0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c60-v2.dts b/target/linux/ath79/dts/qca9561_tplink_archer-c60-v2.dts
new file mode 100644
index 0000000..2bcab77
--- /dev/null
+++ b/target/linux/ath79/dts/qca9561_tplink_archer-c60-v2.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9561_tplink_archer-c6x.dtsi"
+
+/ {
+ compatible = "tplink,archer-c60-v2", "qca,qca9561";
+ model = "TP-Link Archer C60 v2";
+};
+
+&leds {
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "green:wps";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "factory-boot";
+ reg = <0x000000 0x01fb00>;
+ read-only;
+ };
+
+ info: partition@1fb00 {
+ label = "info";
+ reg = <0x01fb00 0x000500>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot";
+ reg = <0x020000 0x010000>;
+ read-only;
+ };
+
+ partition@30000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x030000 0x7a0000>;
+ };
+
+ partition@7d0000 {
+ label = "tplink";
+ reg = <0x7d0000 0x020000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c60-v3.dts b/target/linux/ath79/dts/qca9561_tplink_archer-c60-v3.dts
new file mode 100644
index 0000000..c1a0a8c
--- /dev/null
+++ b/target/linux/ath79/dts/qca9561_tplink_archer-c60-v3.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9561_tplink_archer-c6x.dtsi"
+
+/ {
+ compatible = "tplink,archer-c60-v3", "qca,qca9561";
+ model = "TP-Link Archer C60 v3";
+};
+
+&leds {
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+};
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "factory-boot";
+ reg = <0x000000 0x01fb00>;
+ read-only;
+ };
+
+ info: partition@1fb00 {
+ label = "info";
+ reg = <0x01fb00 0x000500>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot";
+ reg = <0x020000 0x010000>;
+ read-only;
+ };
+
+ partition@30000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x030000 0x7a0000>;
+ };
+
+ partition@7d0000 {
+ label = "tplink";
+ reg = <0x7d0000 0x020000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c6x.dtsi b/target/linux/ath79/dts/qca9561_tplink_archer-c6x.dtsi
new file mode 100644
index 0000000..75d3816
--- /dev/null
+++ b/target/linux/ath79/dts/qca9561_tplink_archer-c6x.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ label-mac-device = ð1;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wifi {
+ label = "WiFi button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wan_green {
+ label = "green:wan";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&info 0x8>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&info 0x8>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/dts/qca9561_tplink_eap225-wall-v2.dts b/target/linux/ath79/dts/qca9561_tplink_eap225-wall-v2.dts
new file mode 100644
index 0000000..a39fde0
--- /dev/null
+++ b/target/linux/ath79/dts/qca9561_tplink_eap225-wall-v2.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,eap225-wall-v2", "qca,qca9561";
+ model = "TP-Link EAP225-Wall v2";
+
+ aliases {
+ label-mac-device = ð1;
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ led {
+ label = "LED button";
+ linux,code = <KEY_LIGHTS_TOGGLE>;
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "white:status";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ poe_passthrough {
+ gpio-export,name = "tp-link:poe-passthrough:enable";
+ gpio-export,output = <0>;
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "partition-table";
+ reg = <0x020000 0x010000>;
+ read-only;
+ };
+
+ info: partition@30000 {
+ label = "info";
+ reg = <0x030000 0x010000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "openwrt,elf";
+ label = "firmware";
+ reg = <0x040000 0xd80000>;
+ };
+
+ partition@dc0000 {
+ label = "config";
+ reg = <0xdc0000 0x030000>;
+ read-only;
+ };
+
+ /* df0000-f30000 undefined in vendor firmware */
+
+ partition@f30000 {
+ label = "mutil-log";
+ reg = <0xf30000 0x080000>;
+ read-only;
+ };
+
+ partition@fb0000 {
+ label = "oops";
+ reg = <0xfb0000 0x040000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&info 0x8>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/dts/qca9561_xiaomi_mi-router-4q.dts b/target/linux/ath79/dts/qca9561_xiaomi_mi-router-4q.dts
new file mode 100644
index 0000000..821f125
--- /dev/null
+++ b/target/linux/ath79/dts/qca9561_xiaomi_mi-router-4q.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "xiaomi,mi-router-4q", "qca,qca9560";
+ model = "Xiaomi Mi Router 4Q";
+
+ aliases {
+ led-boot = &led_yellow;
+ led-failsafe = &led_red;
+ led-running = &led_blue;
+ led-upgrade = &led_red;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "WPS/MI button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_red: led_red {
+ label = "red:led";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led_yellow: led_yellow {
+ label = "yellow:led";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ led_blue: led_blue {
+ label = "blue:led";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "nvram";
+ reg = <0x030000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "boarddata";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "crash";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+
+ art: partition@60000 {
+ label = "art";
+ reg = <0x60000 0x10000>;
+ read-only;
+ };
+
+ partition@70000 {
+ label = "cfg_bak";
+ reg = <0x70000 0x20000>;
+ read-only;
+ };
+
+ partition@90000 {
+ label = "overlay";
+ reg = <0x90000 0x170000>;
+ read-only;
+ };
+
+ partition@200000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x200000 0xe00000>;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+};
diff --git a/target/linux/ath79/dts/qca9563_compex_wpj563.dts b/target/linux/ath79/dts/qca9563_compex_wpj563.dts
new file mode 100644
index 0000000..81fc11b
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_compex_wpj563.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Compex WPJ563";
+ compatible = "compex,wpj563", "qca,qca9563";
+
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_sig4;
+ led-failsafe = &led_sig4;
+ led-running = &led_sig4;
+ led-upgrade = &led_sig4;
+ };
+
+ beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ sig1 {
+ label = "green:sig1";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ sig2 {
+ label = "green:sig2";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ sig3 {
+ label = "green:sig4";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led_sig4: sig4 {
+ label = "green:sig4";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x030000>;
+ read-only;
+ };
+
+ partition@30000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x030000 0xfc0000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+ qca,mib-poll-interval = <500>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001919>;
+
+ mtd-mac-address = <&uboot 0x2e010>;
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-842-c.dtsi b/target/linux/ath79/dts/qca9563_dlink_dir-842-c.dtsi
new file mode 100644
index 0000000..1366e68
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_dlink_dir-842-c.dtsi
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "green:wps";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "devdata";
+ reg = <0x050000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "devconf";
+ reg = <0x060000 0x10000>;
+ read-only;
+ };
+
+ partition@70000 {
+ label = "misc";
+ reg = <0x070000 0x10000>;
+ read-only;
+ };
+
+ partition@80000 {
+ compatible = "seama";
+ label = "firmware";
+ reg = <0x080000 0xf50000>;
+ };
+
+ art: partition@fd0000 {
+ label = "art";
+ reg = <0xfd0000 0x010000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "reserved";
+ reg = <0xfe0000 0x20000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,mib-poll-interval = <500>;
+ reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRAP */
+ 0x50 0xcc35cc35 /* LED_CTRL0 */
+ 0x54 0xcb37cb37 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x00f3cf00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001919>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&wmac {
+ status = "okay";
+
+ qca,no-eeprom;
+};
diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-842-c1.dts b/target/linux/ath79/dts/qca9563_dlink_dir-842-c1.dts
new file mode 100644
index 0000000..23f912d
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_dlink_dir-842-c1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_dlink_dir-842-c.dtsi"
+
+/ {
+ compatible = "dlink,dir-842-c1", "qca,qca9563";
+ model = "D-Link DIR-842 C1";
+};
diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-842-c2.dts b/target/linux/ath79/dts/qca9563_dlink_dir-842-c2.dts
new file mode 100644
index 0000000..1a62764
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_dlink_dir-842-c2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_dlink_dir-842-c.dtsi"
+
+/ {
+ compatible = "dlink,dir-842-c2", "qca,qca9563";
+ model = "D-Link DIR-842 C2";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-842-c3.dts b/target/linux/ath79/dts/qca9563_dlink_dir-842-c3.dts
new file mode 100644
index 0000000..e43113a
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_dlink_dir-842-c3.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_dlink_dir-842-c.dtsi"
+
+/ {
+ compatible = "dlink,dir-842-c3", "qca,qca9563";
+ model = "D-Link DIR-842 C3";
+};
diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts b/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
new file mode 100644
index 0000000..a65ccc0
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "D-Link DIR-859 A1";
+ compatible = "dlink,dir-859-a1", "qca,qca9563";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "green:wps";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ internet {
+ label = "green:internet";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio_switch_reset {
+ gpio-export,name = "dir-859-a1:reset:switch";
+ gpio-export,output = <1>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x000000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "bdcfg";
+ reg = <0x040000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "devdata";
+ reg = <0x050000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "devconf";
+ reg = <0x060000 0x10000>;
+ read-only;
+ };
+
+ partition@70000 {
+ compatible = "seama";
+ label = "firmware";
+ reg = <0x070000 0xf80000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+ qca,mib-poll-interval = <500>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRAP */
+ 0x50 0xcc35cc35 /* LED_CTRL0 */
+ 0x54 0xcb37cb37 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x00f3cf00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001919>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&wmac {
+ status = "okay";
+
+ qca,no-eeprom;
+};
diff --git a/target/linux/ath79/dts/qca9563_elecom_wrc-1750ghbk2-i.dts b/target/linux/ath79/dts/qca9563_elecom_wrc-1750ghbk2-i.dts
new file mode 100644
index 0000000..b4f7718
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_elecom_wrc-1750ghbk2-i.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_elecom_wrc-ghbk2-i.dtsi"
+
+/ {
+ model = "ELECOM WRC-1750GHBK2-I/C";
+ compatible = "elecom,wrc-1750ghbk2-i", "qca,qca9563";
+};
+
+&leds {
+ led_power: power {
+ label = "blue:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "blue:wlan2g";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "blue:wlan5g";
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+};
+
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0xf70000>;
+ };
+
+ partition@fe0000 {
+ label = "hwconfig";
+ reg = <0xfe0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+};
+
+&pcie {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts b/target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts
new file mode 100644
index 0000000..3af6f59
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_elecom_wrc-ghbk2-i.dtsi"
+
+/ {
+ model = "ELECOM WRC-300GHBK2-I";
+ compatible = "elecom,wrc-300ghbk2-i", "qca,qca9563";
+};
+
+&leds {
+ led_power: power {
+ label = "white:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "white:wlan2g";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+};
+
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0x770000>;
+ };
+
+ partition@7e0000 {
+ label = "hwconfig";
+ reg = <0x7e0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_elecom_wrc-ghbk2-i.dtsi b/target/linux/ath79/dts/qca9563_elecom_wrc-ghbk2-i.dtsi
new file mode 100644
index 0000000..78eb0fe
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_elecom_wrc-ghbk2-i.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "red:wps";
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+
+ ap {
+ label = "ap";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "nvram";
+ reg = <0x050000 0x020000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00000080 /* PORT0 PAD MODE CTRL */
+ 0x50 0xcf37cf37 /* LED_CTRL0 */
+ 0x54 0x00000000 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001919>;
+
+ mtd-mac-address = <&art 0x1002>;
+ mtd-mac-address-increment = <(-1)>;
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9563_glinet_gl-ar750s-nor-nand.dts b/target/linux/ath79/dts/qca9563_glinet_gl-ar750s-nor-nand.dts
new file mode 100644
index 0000000..433ed9d
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_glinet_gl-ar750s-nor-nand.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_glinet_gl-ar750s.dtsi"
+
+/ {
+ compatible = "glinet,gl-ar750s-nor-nand", "qca,qca9563";
+ model = "GL.iNet GL-AR750S (NOR/NAND)";
+};
+
+&nor_partitions {
+ partition@60000 {
+ label = "kernel";
+ reg = <0x060000 0x400000>;
+
+ /*
+ * U-Boot bootcmd is "bootm 0x9f060000".
+ * So this might be possible to resize in the future.
+ */
+ };
+
+ partition@460000 {
+ label = "nor_reserved";
+ reg = <0x460000 0xba0000>;
+ };
+};
+
+&nand_ubi {
+ label = "ubi";
+};
diff --git a/target/linux/ath79/dts/qca9563_glinet_gl-ar750s-nor.dts b/target/linux/ath79/dts/qca9563_glinet_gl-ar750s-nor.dts
new file mode 100644
index 0000000..4203e1f
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_glinet_gl-ar750s-nor.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_glinet_gl-ar750s.dtsi"
+
+/ {
+ compatible = "glinet,gl-ar750s-nor", "qca,qca9563";
+ model = "GL.iNet GL-AR750S (NOR)";
+};
+
+&nor_partitions {
+ partition@60000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x060000 0xfa0000>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_glinet_gl-ar750s.dtsi b/target/linux/ath79/dts/qca9563_glinet_gl-ar750s.dtsi
new file mode 100644
index 0000000..9226d37
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_glinet_gl-ar750s.dtsi
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "glinet,gl-ar750s", "qca,qca9563";
+ model = "GL.iNet GL-AR750S";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ mode {
+ label = "mode";
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ led_wlan2g: wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ led_wlan5g: wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ i2c: i2c {
+ compatible = "i2c-gpio";
+
+ sda-gpios = <&gpio 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash_nor: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ nor_partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ /* Firmware / Kernel flash type specific */
+ };
+ };
+
+ flash_nand: flash@1 {
+ compatible = "spi-nand";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+
+ nand_partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand_ubi: partition@0 {
+ label = "nand_ubi";
+ reg = <0x000000 0x8000000>;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy0>;
+ mtd-mac-address = <&art 0x0>;
+};
+
+&gpio {
+ usb_vbus {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb-vbus";
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9563_nec_wg1200cr.dts b/target/linux/ath79/dts/qca9563_nec_wg1200cr.dts
new file mode 100644
index 0000000..26c1932
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_nec_wg1200cr.dts
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "NEC Aterm WG1200CR";
+ compatible = "nec,wg1200cr", "qca,qca9563";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ /* other LEDs are connected to ath10k (QCA9888) gpiochip */
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+
+ bridge {
+ label = "br";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+
+ converter {
+ label = "cnv";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "devdata";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "devconf";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "misc";
+ reg = <0x060000 0x010000>;
+ read-only;
+ };
+
+ partition@70000 {
+ label = "wifimngdata";
+ reg = <0x070000 0x010000>;
+ read-only;
+ };
+
+ partition@80000 {
+ compatible = "seama";
+ label = "firmware";
+ reg = <0x080000 0x770000>;
+ };
+
+ partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00000080 /* PORT0 PAD MODE CTRL */
+ 0x50 0xcc35cc35 /* LED_CTRL0 */
+ 0x54 0xca35ca35 /* LED_CTRL1 */
+ 0x58 0xc935c935 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001919>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&pcie {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "pci168c,0056";
+ reg = <0x0000 0 0 0 0>;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ qca,no-eeprom;
+};
diff --git a/target/linux/ath79/dts/qca9563_nec_wg800hp.dts b/target/linux/ath79/dts/qca9563_nec_wg800hp.dts
new file mode 100644
index 0000000..1069a63
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_nec_wg800hp.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "NEC Aterm WG800HP";
+ compatible = "nec,wg800hp", "qca,qca9563";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ wlan2g_red {
+ label = "red:wlan2g";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ active_red {
+ label = "red:active";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ active_green {
+ label = "green:active";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan5g_red {
+ label = "red:wlan5g";
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5g_green {
+ label = "green:wlan5g";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan2g_green {
+ label = "green:wlan2g";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ br {
+ label = "br";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0x6f0000>;
+ };
+
+ partition@740000 {
+ label = "user_data";
+ reg = <0x740000 0x0a0000>;
+ read-only;
+ };
+
+ partition@7e0000 {
+ label = "board_data";
+ reg = <0x7e0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00000080 /* PORT0 PAD MODE CTRL */
+ 0x50 0xcc35cc35 /* LED_CTRL0 */
+ 0x54 0xca35ca35 /* LED_CTRL1 */
+ 0x58 0xc935c935 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+ qca,no-eeprom;
+};
diff --git a/target/linux/ath79/dts/qca9563_netgear_wndr.dtsi b/target/linux/ath79/dts/qca9563_netgear_wndr.dtsi
new file mode 100644
index 0000000..8c6a374
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_netgear_wndr.dtsi
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_power_amber;
+ led-failsafe = &led_power_amber;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_amber;
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ rfkill {
+ label = "rfkill";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&ath9k 9 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_amber: power_amber {
+ label = "amber:power";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wan_green {
+ label = "green:wan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g_green {
+ label = "green:wlan2g";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wps_green {
+ label = "green:wps";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan5g_blue {
+ label = "blue:wlan5g";
+ gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ label = "caldata_backup";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "config";
+ reg = <0x60000 0x10000>;
+ };
+
+ partition@70000 {
+ label = "traffic_meter";
+ reg = <0x70000 0x10000>;
+ };
+
+ partition@80000 {
+ label = "pot";
+ reg = <0x80000 0x10000>;
+ };
+
+ partition@90000 {
+ label = "reserved";
+ reg = <0x90000 0x160000>;
+ };
+
+ caldata: partition@1f0000 {
+ label = "caldata";
+ reg = <0x1f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+
+ flash@1 {
+ compatible = "spi-nand";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x400000>;
+ };
+
+ partition@400000 {
+ label = "ubi";
+ reg = <0x400000 0x7c00000>;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+ qca,mib-poll-interval = <500>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00000080 /* PORT0 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRAP */
+ 0x50 0xcc35cc35 /* LED_CTRL0 */
+ 0x54 0xcb37cb37 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x00f3cf00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x00000200 /* PORT6_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001919>;
+
+ mtd-mac-address = <&caldata 0x0>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-mac-address = <&caldata 0x0>;
+ qca,no-eeprom;
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ /* chip is AR9580, override bogus PCI ID 168c:abcd */
+ compatible = "pci168c,0033";
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&caldata 0xc>;
+ qca,no-eeprom;
+ qca,gpio-mask=<0xf6ff>; /* unmask pin 9 for RFKILL button */
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_netgear_wndr4300-v2.dts b/target/linux/ath79/dts/qca9563_netgear_wndr4300-v2.dts
new file mode 100644
index 0000000..8682413
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_netgear_wndr4300-v2.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_netgear_wndr.dtsi"
+
+/ {
+ compatible = "netgear,wndr4300-v2", "qca,qca9563";
+ model = "Netgear WNDR4300 v2";
+};
+
+&leds {
+ usb_green {
+ label = "green:usb";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_netgear_wndr4500-v3.dts b/target/linux/ath79/dts/qca9563_netgear_wndr4500-v3.dts
new file mode 100644
index 0000000..6e25215
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_netgear_wndr4500-v3.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_netgear_wndr.dtsi"
+
+/ {
+ compatible = "netgear,wndr4500-v3", "qca,qca9563";
+ model = "Netgear WNDR4500 v3";
+};
+
+&leds {
+ usb1_green {
+ label = "green:usb1";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+
+ usb2_green {
+ label = "green:usb2";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port1>;
+ linux,default-trigger = "usbport";
+ };
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_phicomm_k2t.dts b/target/linux/ath79/dts/qca9563_phicomm_k2t.dts
new file mode 100644
index 0000000..63e2e53
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_phicomm_k2t.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Phicomm K2T";
+ compatible = "phicomm,k2t", "qca,qca9563";
+
+ aliases {
+ led-boot = &led_status_red;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_red;
+ led-upgrade = &led_status_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status_blue {
+ label = "blue:status";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_red: status_red {
+ label = "red:status";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ status_yellow {
+ label = "yellow:status";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x030000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "permanent";
+ reg = <0x040000 0x50000>;
+ read-only;
+ };
+
+ partition@90000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x090000 0xf60000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRAP */
+ 0x50 0xcc35cc35 /* LED_CTRL0 */
+ 0x54 0xcb37cb37 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x00f3cf00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001919>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-16m.dts b/target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-16m.dts
new file mode 100644
index 0000000..b851380
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-16m.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_qxwlan_e1700ac.dtsi"
+
+/ {
+ model = "Qxwlan E1700AC v2 16M";
+ compatible = "qxwlan,e1700ac-v2-16m", "qca,qca9563";
+};
+
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0xf90000>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-8m.dts b/target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-8m.dts
new file mode 100644
index 0000000..7aaac48
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-8m.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_qxwlan_e1700ac.dtsi"
+
+/ {
+ model = "Qxwlan E1700AC v2 8M";
+ compatible = "qxwlan,e1700ac-v2-8m", "qca,qca9563";
+};
+
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0x790000>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_qxwlan_e1700ac.dtsi b/target/linux/ath79/dts/qca9563_qxwlan_e1700ac.dtsi
new file mode 100644
index 0000000..9cf146c
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_qxwlan_e1700ac.dtsi
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ usb {
+ label = "green:usb";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ pridata: partition@50000 {
+ label = "pri-data";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ art: partition@60000 {
+ label = "art";
+ reg = <0x060000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+ qca,mib-poll-interval = <500>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001919>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+
+ mtd-mac-address = <&pridata 0x400>;
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9563_rosinson_wr818.dts b/target/linux/ath79/dts/qca9563_rosinson_wr818.dts
new file mode 100644
index 0000000..a88eeb3
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_rosinson_wr818.dts
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "ROSINSON WR818";
+ compatible = "rosinson,wr818", "qca,qca9563";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "red:system";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi_2g {
+ label = "red:wifi2g";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ info: partition@50000 {
+ label = "factory";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ partition@60000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x060000 0xf80000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&info 0x0>;
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_archer-a7-v5.dts b/target/linux/ath79/dts/qca9563_tplink_archer-a7-v5.dts
new file mode 100644
index 0000000..eecfe35
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_archer-a7-v5.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_archer-x7-v5.dtsi"
+
+/ {
+ compatible = "tplink,archer-a7-v5", "qca,qca9563";
+ model = "TP-Link Archer A7 v5";
+};
+
+&keys {
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+};
+
+&mtdparts {
+ partition@0 {
+ label = "factory-uboot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ uboot: partition@20000 {
+ label = "u-boot";
+ reg = <0x020000 0x020000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x040000 0xec0000>;
+ compatible = "denx,uimage";
+ };
+
+ info: partition@f40000 {
+ label = "info";
+ reg = <0xf40000 0x020000>;
+ read-only;
+ };
+
+ config: partition@f60000 {
+ label = "config";
+ reg = <0xf60000 0x050000>;
+ read-only;
+ };
+
+ partition@fc0000 {
+ label = "partition-table";
+ reg = <0xfc0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_archer-c2-v3.dts b/target/linux/ath79/dts/qca9563_tplink_archer-c2-v3.dts
new file mode 100644
index 0000000..6c4b04b
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_archer-c2-v3.dts
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,archer-c2-v3", "qca,qca9563";
+ model = "TP-Link Archer C2 v3";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wifi2g {
+ label = "green:wifi2g";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wifi5g {
+ label = "green:wifi5g";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi_wps {
+ label = "green:wps";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_fail {
+ label = "orange:wan";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "green:lan2";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "green:lan3";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "green:lan4";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "factory-uboot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "uboot";
+ reg = <0x020000 0x10000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "firmware";
+ reg = <0x030000 0x7A0000>;
+ compatible = "denx,uimage";
+ };
+
+ info: partition@7e0000 {
+ label = "info";
+ reg = <0x7e0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+ qca,mib-poll-interval = <500>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&info 0x8>;
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_archer-c6-v2-us.dts b/target/linux/ath79/dts/qca9563_tplink_archer-c6-v2-us.dts
new file mode 100644
index 0000000..892e87e
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_archer-c6-v2-us.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_archer-x6-v2.dtsi"
+
+/ {
+ compatible = "tplink,archer-c6-v2-us", "qca,qca9563";
+ model = "TP-Link Archer C6 v2 (US) / A6 v2 (US/TW)";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_fail {
+ label = "amber:wan";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "green:wps";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "factory-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ info: partition@20000 {
+ label = "info";
+ reg = <0x020000 0x010000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot";
+ reg = <0x030000 0x020000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xf80000>;
+ };
+
+ partition@fd0000 {
+ label = "tplink";
+ reg = <0xfd0000 0x020000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_archer-c6-v2.dts b/target/linux/ath79/dts/qca9563_tplink_archer-c6-v2.dts
new file mode 100644
index 0000000..c64402b
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_archer-c6-v2.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_archer-x6-v2.dtsi"
+
+/ {
+ compatible = "tplink,archer-c6-v2", "qca,qca9563";
+ model = "TP-Link Archer C6 v2 (EU/RU/JP)";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_fail {
+ label = "amber:wan";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "green:wps";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ info: partition@20000 {
+ label = "info";
+ reg = <0x020000 0x010000>;
+ read-only;
+ };
+
+ partition@30000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x030000 0x7a0000>;
+ };
+
+ partition@7d0000 {
+ label = "tplink";
+ reg = <0x7d0000 0x020000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_archer-c7-v4.dts b/target/linux/ath79/dts/qca9563_tplink_archer-c7-v4.dts
new file mode 100644
index 0000000..63040ac
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_archer-c7-v4.dts
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,archer-c7-v4", "qca,qca9563";
+ model = "TP-Link Archer C7 v4";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = ð0;
+ };
+
+ led_spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; // 74HC595 SRCLK (Serial Clock)
+ mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; // 74HC595 SER (Serial)
+ cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; // 74HC595 RCLK (Register Clock)
+ num-chipselects = <1>;
+
+ led_gpio: led_gpio@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <1>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_shift_register_oe {
+ gpio-export,name = "tp-link:oe:sr";
+ gpio-export,output = <0>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>; // 74HC595 /OE (Output Enable)
+ };
+
+ gpio_shift_register_reset {
+ gpio-export,name = "tp-link:reset:sr";
+ gpio-export,output = <1>;
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>; // 74HC595 /SRCLR (Serial Clear)
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ usb1 {
+ label = "green:usb1";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ usb2 {
+ label = "green:usb2";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_fail {
+ label = "orange:wan";
+ gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "green:lan2";
+ gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "green:lan3";
+ gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "green:lan4";
+ gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "green:wps";
+ gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "factory-uboot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot";
+ reg = <0x020000 0x020000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x040000 0xec0000>;
+ compatible = "denx,uimage";
+ };
+
+ info: partition@f00000 {
+ label = "info";
+ reg = <0xf00000 0x0f0000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+ qca,mib-poll-interval = <500>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x80080080 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x00000200 /* PORT6_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001919>;
+
+ phy-mode = "sgmii";
+ mtd-mac-address = <&info 0x8>;
+ phy-handle = <&phy0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_archer-c7-v5.dts b/target/linux/ath79/dts/qca9563_tplink_archer-c7-v5.dts
new file mode 100644
index 0000000..da8d0c1
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_archer-c7-v5.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_archer-x7-v5.dtsi"
+
+/ {
+ compatible = "tplink,archer-c7-v5", "qca,qca9563";
+ model = "TP-Link Archer C7 v5";
+};
+
+&keys {
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+};
+
+&mtdparts {
+ partition@0 {
+ label = "factory-uboot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot";
+ reg = <0x020000 0x020000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "partition-table";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ info: partition@60000 {
+ label = "info";
+ reg = <0x060000 0x020000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "user-config";
+ reg = <0x080000 0x040000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "firmware";
+ reg = <0x0c0000 0xf00000>;
+ compatible = "denx,uimage";
+ };
+
+ partition@ff0000 {
+ label = "default-config";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_archer-x6-v2.dtsi b/target/linux/ath79/dts/qca9563_tplink_archer-x6-v2.dtsi
new file mode 100644
index 0000000..1a074e6
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_archer-x6-v2.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = ð0;
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+ qca,mib-poll-interval = <500>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+
+ mtd-mac-address = <&info 0x8>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi b/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi
new file mode 100644
index 0000000..3644cf8
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = ð0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ usb {
+ label = "green:usb";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_fail {
+ label = "orange:wan";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "green:lan2";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "green:lan3";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "green:lan4";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "green:wps";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys: keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_usb_power {
+ gpio-export,name = "tp-link:power:usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ mtdparts: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+ qca,mib-poll-interval = <500>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x80080080 /* PORT0 PAD MODE CTRL */
+ 0x08 0x00000000 /* PORT5 PAD MODE CTRL */
+ 0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
+ 0x10 0x00000080 /* POWER_ON_STRAP */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x00000200 /* PORT6_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001919>;
+
+ phy-mode = "sgmii";
+ mtd-mac-address = <&info 0x8>;
+ phy-handle = <&phy0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v1.dts b/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v1.dts
new file mode 100644
index 0000000..fc6d336
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v1.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_eap2x5-1port.dtsi"
+
+/ {
+ compatible = "tplink,eap225-outdoor-v1", "qca,qca9563";
+ model = "TP-Link EAP225-Outdoor v1";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_amber;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_amber;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_green: status_green {
+ label = "green:status";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_status_amber: status_amber {
+ label = "amber:status";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_eap225-v3.dts b/target/linux/ath79/dts/qca9563_tplink_eap225-v3.dts
new file mode 100644
index 0000000..3d4950e
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_eap225-v3.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_eap2x5-1port.dtsi"
+
+/ {
+ compatible = "tplink,eap225-v3", "qca,qca9563";
+ model = "TP-Link EAP225 v3";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_amber;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_amber;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_green: status_green {
+ label = "green:status";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led_status_amber: status_amber {
+ label = "amber:status";
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_eap245-v1.dts b/target/linux/ath79/dts/qca9563_tplink_eap245-v1.dts
new file mode 100644
index 0000000..3da4501
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_eap245-v1.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_eap2x5-1port.dtsi"
+
+/ {
+ compatible = "tplink,eap245-v1", "qca,qca9563";
+ model = "TP-Link EAP245 v1";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_amber;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_amber;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_green: status_green {
+ label = "green:status";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led_status_amber: status_amber {
+ label = "amber:status";
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_red: status_red {
+ label = "red:status";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ led_enable {
+ gpio-export,name = "leds:enable";
+ gpio-export,output = <1>;
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_eap245-v3.dts b/target/linux/ath79/dts/qca9563_tplink_eap245-v3.dts
new file mode 100644
index 0000000..6b438ce
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_eap245-v3.dts
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,eap245-v3", "qca,qca9563";
+ model = "TP-Link EAP245 v3";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_amber;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_amber;
+ label-mac-device = ð0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_green: status_green {
+ label = "green:status";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led_status_amber: status_amber {
+ label = "amber:status";
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "factory-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot";
+ reg = <0x040000 0x040000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "partition-table";
+ reg = <0x080000 0x010000>;
+ read-only;
+ };
+
+ info: partition@90000 {
+ label = "info";
+ reg = <0x090000 0x010000>;
+ read-only;
+ };
+
+ art: partition@a0000 {
+ label = "art";
+ reg = <0x0a0000 0x010000>;
+ read-only;
+ };
+
+ partition@b0000 {
+ label = "extra-para";
+ reg = <0x0b0000 0x010000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ compatible = "openwrt,elf";
+ label = "firmware";
+ reg = <0x0c0000 0xe40000>;
+ };
+
+ partition@f00000 {
+ label = "config";
+ reg = <0xf00000 0x030000>;
+ read-only;
+ };
+
+ partition@f30000 {
+ label = "mutil-log";
+ reg = <0xf30000 0x080000>;
+ read-only;
+ };
+
+ partition@fb0000 {
+ label = "oops";
+ reg = <0xfb0000 0x040000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x1>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PAD0 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0xe0 0xc74164de /* SGMII_CTRL */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy0>;
+ phy-mode = "sgmii";
+
+ mtd-mac-address = <&info 0x8>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_eap2x5-1port.dtsi b/target/linux/ath79/dts/qca9563_tplink_eap2x5-1port.dtsi
new file mode 100644
index 0000000..a6aefc7
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_eap2x5-1port.dtsi
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "partition-table";
+ reg = <0x020000 0x010000>;
+ read-only;
+ };
+
+ info: partition@30000 {
+ label = "info";
+ reg = <0x030000 0x010000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "openwrt,elf";
+ label = "firmware";
+ reg = <0x040000 0xd80000>;
+ };
+
+ partition@dc0000 {
+ label = "config";
+ reg = <0xdc0000 0x030000>;
+ read-only;
+ };
+
+ /* df0000-f30000 undefined in vendor firmware */
+
+ partition@f30000 {
+ label = "log";
+ reg = <0xf30000 0x0c0000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pinmux {
+ mdio_pins: mdio_pins {
+ /* GPIO 10 as MDIO(0x20), GPIO 8 as MDC(0x21) */
+ pinctrl-single,bits = <0x8 0x00200021 0x00ff00ff>;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+
+ phy-mask = <0x10>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy4>;
+ phy-mode = "sgmii";
+ pll-data = <0x03000000 0x00000101 0x00001313>;
+
+ mtd-mac-address = <&info 0x8>;
+
+ qca956x-serdes-fixup;
+
+ gmac-config {
+ device = <&gmac>;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_re450-v2.dts b/target/linux/ath79/dts/qca9563_tplink_re450-v2.dts
new file mode 100644
index 0000000..d0356d6
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_re450-v2.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_re450.dtsi"
+
+/ {
+ compatible = "tplink,re450-v2", "qca,qca9563";
+ model = "TP-Link RE450 v2";
+};
+
+&partitions {
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x5e0000>;
+ };
+
+ partition@600000 {
+ label = "partition-table";
+ reg = <0x600000 0x010000>;
+ read-only;
+ };
+
+ info: partition@610000 {
+ label = "info";
+ reg = <0x610000 0x020000>;
+ read-only;
+ };
+
+ partition@630000 {
+ label = "config";
+ reg = <0x630000 0x020000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_re450-v3.dts b/target/linux/ath79/dts/qca9563_tplink_re450-v3.dts
new file mode 100644
index 0000000..695f78e
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_re450-v3.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_re450.dtsi"
+
+/ {
+ compatible = "tplink,re450-v3", "qca,qca9563";
+ model = "TP-Link RE450 v3";
+};
+
+&partitions {
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ info: partition@20000 {
+ label = "info";
+ reg = <0x020000 0x002000>;
+ read-only;
+ };
+
+ partition@22000 {
+ label = "partition-table";
+ reg = <0x022000 0x002000>;
+ read-only;
+ };
+
+ partition@24000 {
+ label = "info2";
+ reg = <0x024000 0x00a000>;
+ read-only;
+ };
+
+ partition@2e000 {
+ label = "config";
+ reg = <0x02e000 0x022000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x050000 0x7a0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_re450.dtsi b/target/linux/ath79/dts/qca9563_tplink_re450.dtsi
new file mode 100644
index 0000000..3354bae
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_re450.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ mdio-gpio0 = &mdio2;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "blue:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "blue:wlan2g";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "blue:wlan5g";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan_link {
+ label = "green:lan_link";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ lan_data {
+ label = "green:lan_data";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wps_blue {
+ label = "blue:wps";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps_red {
+ label = "red:wps";
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ power {
+ label = "Power button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ leds {
+ label = "LED control button";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ mdio2: mdio {
+ compatible = "virtual,mdio-gpio";
+
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
+ <&gpio 4 GPIO_ACTIVE_HIGH>; /* MDIO */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ device_type = "ethernet-phy";
+ reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy4>;
+
+ mtd-mac-address = <&info 0x8>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630-v1.dts b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630-v1.dts
new file mode 100644
index 0000000..4df03ef
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630-v1.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_tl-wpa8630.dtsi"
+
+/ {
+ compatible = "tplink,tl-wpa8630-v1", "qca,qca9563";
+ model = "TP-Link TL-WPA8630 v1";
+
+ aliases {
+ label-mac-device = ð0;
+ };
+};
+
+&partitions {
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ partition@10000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x010000 0x7d0000>;
+ };
+
+ partition@7e0000 {
+ label = "mib0";
+ reg = <0x7e0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+};
+
+ð0 {
+ mtd-mac-address = <&uboot 0x0fc00>;
+};
+
+&wmac {
+ mtd-mac-address = <&uboot 0x0fc00>;
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630.dtsi b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630.dtsi
new file mode 100644
index 0000000..5fd314b
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630.dtsi
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ leds {
+ label = "LED control button";
+ linux,code = <KEY_LIGHTS_TOGGLE>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ pair {
+ label = "Pair button";
+ linux,code = <BTN_1>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wifi {
+ label = "WiFi button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi2g {
+ label = "green:wifi2g";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wifi5g {
+ label = "green:wifi5g";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ led_control {
+ gpio-export,name = "tp-link:led:control";
+ gpio-export,output = <0>;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+ qca,mib-poll-interval = <500>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy0>;
+ phy-mode = "sgmii";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2-int.dts b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2-int.dts
new file mode 100644
index 0000000..50a88f3
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2-int.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_tl-wpa8630p-v2.dtsi"
+
+/ {
+ compatible = "tplink,tl-wpa8630p-v2-int", "qca,qca9563";
+ model = "TP-Link WPA8630P v2 (Int.)";
+};
+
+&partitions {
+ partition@620000 {
+ label = "partition-table";
+ reg = <0x620000 0x010000>;
+ read-only;
+ };
+
+ partition@630000 {
+ label = "tplink";
+ reg = <0x630000 0x1b0000>;
+ read-only;
+ };
+
+ info: partition@7e0000 {
+ label = "info";
+ reg = <0x7e0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.0-eu.dts b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.0-eu.dts
new file mode 100644
index 0000000..9eff2fc
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.0-eu.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_tl-wpa8630p-v2.dtsi"
+
+/ {
+ compatible = "tplink,tl-wpa8630p-v2.0-eu", "qca,qca9563";
+ model = "TP-Link WPA8630P v2.0 (EU)";
+};
+
+&partitions {
+ partition@620000 {
+ label = "partition-table";
+ reg = <0x620000 0x010000>;
+ read-only;
+ };
+
+ info: partition@630000 {
+ label = "info";
+ reg = <0x630000 0x010000>;
+ read-only;
+ };
+
+ partition@640000 {
+ label = "tplink";
+ reg = <0x640000 0x1b0000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.1-eu.dts b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.1-eu.dts
new file mode 100644
index 0000000..e8d9241
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.1-eu.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_tl-wpa8630p-v2.dtsi"
+
+/ {
+ compatible = "tplink,tl-wpa8630p-v2.1-eu", "qca,qca9563";
+ model = "TP-Link WPA8630P v2.1 (EU)";
+};
+
+&partitions {
+ /* 0x620000 to 0x680000 is empty in OEM partitioning */
+
+ partition@680000 {
+ label = "tplink";
+ reg = <0x680000 0x160000>;
+ read-only;
+ };
+
+ info: partition@7e0000 {
+ label = "info";
+ reg = <0x7e0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi
new file mode 100644
index 0000000..9e6d23d
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_tl-wpa8630.dtsi"
+
+/ {
+ aliases {
+ label-mac-device = ð0;
+ };
+};
+
+&partitions {
+ partition@0 {
+ label = "factory-uboot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot";
+ reg = <0x020000 0x020000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x040000 0x5e0000>;
+ };
+};
+
+ð0 {
+ mtd-mac-address = <&info 0x8>;
+};
+
+&wmac {
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n-v5.dts b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n-v5.dts
new file mode 100644
index 0000000..cba124a
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n-v5.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_tl-wr1043n.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr1043n-v5", "qca,qca9563";
+ model = "TP-Link TL-WR1043N v5";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "factory-uboot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot";
+ reg = <0x020000 0x020000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x040000 0xec0000>;
+ };
+
+ info: partition@f00000 {
+ label = "info";
+ reg = <0xf00000 0x020000>;
+ read-only;
+ };
+
+ partition@f20000 {
+ label = "config";
+ reg = <0xf20000 0x0a0000>;
+ read-only;
+ };
+
+ partition@fc0000 {
+ label = "partition-table";
+ reg = <0xfc0000 0x010000>;
+ read-only;
+ };
+
+ partition@fd0000 {
+ label = "logs";
+ reg = <0xfd0000 0x020000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi
new file mode 100644
index 0000000..c8c69e8
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = &wmac;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ wifi_green {
+ label = "green:wlan";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi_wps {
+ label = "green:wps";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_fail {
+ label = "orange:wan";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "green:lan2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "green:lan3";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "green:lan4";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wifi {
+ label = "RFKILL button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+ qca,mib-poll-interval = <500>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&info 0x8>;
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wr1043nd-v4.dts b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043nd-v4.dts
new file mode 100644
index 0000000..ddb986f
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043nd-v4.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_tl-wr1043n.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr1043nd-v4", "qca,qca9563";
+ model = "TP-Link TL-WR1043ND v4";
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio_usb_power {
+ gpio-export,name = "tp-link:power:usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0xf30000>;
+ };
+
+ info: partition@f50000 {
+ label = "info";
+ reg = <0xf50000 0x020000>;
+ read-only;
+ };
+
+ partition@f70000 {
+ label = "config";
+ reg = <0xf70000 0x050000>;
+ read-only;
+ };
+
+ partition@fc0000 {
+ label = "partition-table";
+ reg = <0xfc0000 0x010000>;
+ read-only;
+ };
+
+ partition@fd0000 {
+ label = "logs";
+ reg = <0xfd0000 0x020000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&leds {
+ usb {
+ label = "green:usb";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port0>;
+ linux,default-trigger = "usbport";
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_ubnt_unifiac-lite.dts b/target/linux/ath79/dts/qca9563_ubnt_unifiac-lite.dts
new file mode 100644
index 0000000..512d2e4
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_ubnt_unifiac-lite.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_ubnt_unifiac-lite.dtsi"
+
+/ {
+ compatible = "ubnt,unifiac-lite", "qca,qca9563";
+ model = "Ubiquiti UniFi AC Lite";
+};
diff --git a/target/linux/ath79/dts/qca9563_ubnt_unifiac-lite.dtsi b/target/linux/ath79/dts/qca9563_ubnt_unifiac-lite.dtsi
new file mode 100644
index 0000000..b41e90a
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_ubnt_unifiac-lite.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_ubnt_unifiac.dtsi"
+
+/ {
+ aliases {
+ label-mac-device = ð0;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <4>;
+ phy4: ethernet-phy@4 {
+ phy-mode = "sgmii";
+ reg = <4>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+ phy-mode = "sgmii";
+ phy-handle = <&phy4>;
+
+ pll-data = <0x03000000 0x00000101 0x00001313>;
+};
diff --git a/target/linux/ath79/dts/qca9563_ubnt_unifiac-lr.dts b/target/linux/ath79/dts/qca9563_ubnt_unifiac-lr.dts
new file mode 100644
index 0000000..00cc3ac
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_ubnt_unifiac-lr.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_ubnt_unifiac-lite.dtsi"
+
+/ {
+ compatible = "ubnt,unifiac-lr", "qca,qca9563";
+ model = "Ubiquiti UniFi AC LR";
+};
diff --git a/target/linux/ath79/dts/qca9563_ubnt_unifiac-mesh-pro.dts b/target/linux/ath79/dts/qca9563_ubnt_unifiac-mesh-pro.dts
new file mode 100644
index 0000000..0c0bb9c
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_ubnt_unifiac-mesh-pro.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_ubnt_unifiac-pro.dtsi"
+
+/ {
+ compatible = "ubnt,unifiac-mesh-pro", "qca,qca9563";
+ model = "Ubiquiti UniFi AC Mesh Pro";
+};
diff --git a/target/linux/ath79/dts/qca9563_ubnt_unifiac-mesh.dts b/target/linux/ath79/dts/qca9563_ubnt_unifiac-mesh.dts
new file mode 100644
index 0000000..ba7268b
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_ubnt_unifiac-mesh.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_ubnt_unifiac-lite.dtsi"
+
+/ {
+ compatible = "ubnt,unifiac-mesh", "qca,qca9563";
+ model = "Ubiquiti UniFi AC Mesh";
+};
diff --git a/target/linux/ath79/dts/qca9563_ubnt_unifiac-pro.dts b/target/linux/ath79/dts/qca9563_ubnt_unifiac-pro.dts
new file mode 100644
index 0000000..65b7123
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_ubnt_unifiac-pro.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_ubnt_unifiac-pro.dtsi"
+
+/ {
+ compatible = "ubnt,unifiac-pro", "qca,qca9563";
+ model = "Ubiquiti UniFi AC Pro";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9563_ubnt_unifiac-pro.dtsi b/target/linux/ath79/dts/qca9563_ubnt_unifiac-pro.dtsi
new file mode 100644
index 0000000..5a0cf4b
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_ubnt_unifiac-pro.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_ubnt_unifiac.dtsi"
+
+/ {
+ aliases {
+ label-mac-device = ð0;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+ phy-handle = <&phy0>;
+};
diff --git a/target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi b/target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi
new file mode 100644
index 0000000..42fe25c
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_white;
+ led-failsafe = &led_white;
+ led-running = &led_blue;
+ led-upgrade = &led_blue;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_white: led_white {
+ label = "white:dome";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_blue: led_blue {
+ label = "blue:dome";
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x060000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "u-boot-env";
+ reg = <0x060000 0x010000>;
+ read-only;
+ };
+
+ partition@70000 {
+ label = "firmware";
+ reg = <0x070000 0x790000>;
+ compatible = "denx,uimage";
+ };
+
+ partition@800000 {
+ label = "kernel1";
+ reg = <0x800000 0x790000>;
+ read-only;
+ };
+
+ partition@f90000 {
+ label = "bs";
+ reg = <0xf90000 0x020000>;
+ };
+
+ partition@fb0000 {
+ label = "cfg";
+ reg = <0xfb0000 0x040000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9563_xiaomi_aiot-ac2350.dts b/target/linux/ath79/dts/qca9563_xiaomi_aiot-ac2350.dts
new file mode 100644
index 0000000..d8fc589
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_xiaomi_aiot-ac2350.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Xiaomi AIoT AC2350";
+ compatible = "xiaomi,aiot-ac2350", "qca,qca9563";
+
+ aliases {
+ label-mac-device = ð0;
+
+ led-boot = &led_system_orange;
+ led-failsafe = &led_system_orange;
+ led-running = &led_system_blue;
+ led-upgrade = &led_system_orange;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system_blue: system_blue {
+ label = "blue:system";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led_system_orange: system_orange {
+ label = "orange:system";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_blue {
+ label = "blue:wan";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_orange {
+ label = "orange:wan";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ wps {
+ gpio-export,name = "wps";
+ gpio-export,output = <0>;
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb-reset {
+ gpio-export,name = "usb-reset";
+ gpio-export,output = <0>;
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Bootloader";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "Nvram";
+ reg = <0x30000 0x10000>;
+ };
+
+ partition@40000 {
+ label = "Bdata";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "crash";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+
+ art: partition@60000 {
+ label = "art";
+ reg = <0x60000 0x10000>;
+ read-only;
+ };
+
+ partition@70000 {
+ label = "cfg_bak";
+ reg = <0x70000 0x20000>;
+ read-only;
+ };
+
+ partition@90000 {
+ label = "overlay";
+ reg = <0x90000 0x170000>;
+ read-only;
+ };
+
+ partition@200000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x200000 0xe00000>;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x1>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x00000080 /* PORT0 PAD MODE CTRL */
+ 0x08 0x01000000 /* PORT5 PAD MODE CTRL */
+ 0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
+ 0x10 0x602613a0 /* POWER_ON_STRAP */
+ 0x50 0xcf35cf35 /* LED_CTRL0 */
+ 0x54 0xca35ca35 /* LED_CTRL1 */
+ 0x58 0xc935c935 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x000000fe /* PORT0_STATUS */
+ 0x94 0x000010c2 /* PORT6_STATUS */
+ 0xe0 0xc74164de /* SGMII_CTRL */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
+
+&pcie {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9563_yuncore_a782.dts b/target/linux/ath79/dts/qca9563_yuncore_a782.dts
new file mode 100644
index 0000000..5a84195
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_yuncore_a782.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_yuncore_xd4200.dtsi"
+
+/ {
+ compatible = "yuncore,a782", "qca,qca9563";
+ model = "YunCore A782";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "red:system";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_yuncore_xd3200.dts b/target/linux/ath79/dts/qca9563_yuncore_xd3200.dts
new file mode 100644
index 0000000..5c87752
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_yuncore_xd3200.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_yuncore_xd4200.dtsi"
+
+/ {
+ compatible = "yuncore,xd3200", "qca,qca9563";
+ model = "YunCore XD3200";
+
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wlan2g {
+ label = "blue:wlan2g";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_yuncore_xd4200.dts b/target/linux/ath79/dts/qca9563_yuncore_xd4200.dts
new file mode 100644
index 0000000..05032fc
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_yuncore_xd4200.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_yuncore_xd4200.dtsi"
+
+/ {
+ compatible = "yuncore,xd4200", "qca,qca9563";
+ model = "YunCore XD4200";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "blue:system";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wlan2g {
+ label = "blue:wlan2g";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9563_yuncore_xd4200.dtsi b/target/linux/ath79/dts/qca9563_yuncore_xd4200.dtsi
new file mode 100644
index 0000000..4eed20b
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_yuncore_xd4200.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001919>;
+
+ mtd-mac-address = <&art 0x0>;
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRAP */
+ 0x50 0xcf37cf37 /* LED_CTRL0 */
+ 0x54 0xcf37cf37 /* LED_CTRL1 */
+ 0x58 0xcf37cf37 /* LED_CTRL2 */
+ 0x5c 0x0000c300 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "pci168c,0056";
+ reg = <0x0000 0 0 0 0>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca956x.dtsi b/target/linux/ath79/dts/qca956x.dtsi
new file mode 100644
index 0000000..f367ac2
--- /dev/null
+++ b/target/linux/ath79/dts/qca956x.dtsi
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ath79.dtsi"
+
+/ {
+ compatible = "qca,qca9560";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips74Kc";
+ clocks = <&pll ATH79_CLK_CPU>;
+ reg = <0>;
+ };
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <25000000>;
+ };
+
+ ahb {
+ apb {
+ ddr_ctrl: memory-controller@18000000 {
+ compatible = "qca,qca9560-ddr-controller",
+ "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x100>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ uart: uart@18020000 {
+ compatible = "ns16550a";
+ reg = <0x18020000 0x20>;
+
+ interrupts = <3>;
+
+ clocks = <&pll ATH79_CLK_REF>;
+ clock-names = "uart";
+
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ no-loopback-test;
+ };
+
+ gpio: gpio@18040000 {
+ compatible = "qca,qca9560-gpio",
+ "qca,ar9340-gpio";
+ reg = <0x18040000 0x28>;
+
+ interrupts = <2>;
+ ngpios = <24>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pinmux: pinmux@1804002c {
+ compatible = "pinctrl-single";
+
+ reg = <0x1804002c 0x44>;
+
+ #size-cells = <0>;
+
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x1>;
+ #pinctrl-cells = <2>;
+
+ jtag_disable_pins: pinmux_jtag_disable_pins {
+ pinctrl-single,bits = <0x40 0x2 0x2>;
+ };
+ };
+
+ pll: pll-controller@18050000 {
+ compatible = "qca,qca9560-pll", "syscon";
+ reg = <0x18050000 0x50>;
+
+ #clock-cells = <1>;
+ clock-output-names = "cpu", "ddr", "ahb";
+
+ clocks = <&extosc>;
+ };
+
+ wdt: wdt@18060008 {
+ compatible = "qca,ar7130-wdt";
+ reg = <0x18060008 0x8>;
+
+ interrupts = <4>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "wdt";
+ };
+
+ rst: reset-controller@1806001c {
+ compatible = "qca,qca9560-reset",
+ "qca,ar7100-reset";
+ reg = <0x1806001c 0x4>;
+
+ #reset-cells = <1>;
+ interrupt-parent = <&cpuintc>;
+
+ intc3: interrupt-controller {
+ compatible = "qca,ar9340-intc";
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <3>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ qca,int-status-addr = <0xac>;
+ qca,pending-bits = <0x1f000>, /* pcie rc */
+ <0x1000000>, /* usb1 */
+ <0x10000000>; /* usb2 */
+ };
+ };
+
+ rst2: reset-controller@180600c0 {
+ compatible = "qca,qca9560-reset",
+ "qca,ar7100-reset",
+ "simple-bus";
+ reg = <0x180600c0 0x4>;
+
+ #reset-cells = <1>;
+ };
+ };
+
+ gmac: gmac@18070000 {
+ compatible = "qca,qca9560-gmac";
+ reg = <0x18070000 0x64>;
+ };
+
+ wmac: wmac@18100000 {
+ compatible = "qca,qca9560-wmac";
+ reg = <0x18100000 0x10000>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+
+ status = "disabled";
+ };
+
+ pcie: pcie-controller@18250000 {
+ compatible = "qcom,ar7240-pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0x0>;
+ reg = <0x18250000 0x1000>, /* CRP */
+ <0x18280000 0x100>, /* CTRL */
+ <0x16000000 0x1000>; /* CFG */
+ reg-names = "crp_base", "ctrl_base", "cfg_base";
+ ranges = <0x2000000 0 0x12000000 0x12000000 0 0x02000000 /* pci memory */
+ 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
+ interrupt-parent = <&intc3>;
+ interrupts = <0>;
+
+ resets = <&rst 6>, <&rst 7>;
+ reset-names = "hc", "phy";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-map-mask = <0 0 0 1>;
+ interrupt-map = <0 0 0 0 &pcie 0>;
+ status = "disabled";
+ };
+
+ usb0: usb@1b000000 {
+ compatible = "generic-ehci";
+ reg = <0x1b000000 0x1d8>;
+
+ interrupt-parent = <&intc3>;
+ interrupts = <1>;
+
+ resets = <&rst 5>;
+ reset-names = "usb-host";
+
+ has-transaction-translator;
+ caps-offset = <0x100>;
+
+ phy-names = "usb-phy0";
+ phys = <&usb_phy0>;
+
+ status = "disabled";
+ };
+
+ usb1: usb@1b400000 {
+ compatible = "generic-ehci";
+ reg = <0x1b400000 0x1d8>;
+
+ interrupt-parent = <&intc3>;
+ interrupts = <2>;
+
+ resets = <&rst2 5>;
+ reset-names = "usb-host";
+
+ has-transaction-translator;
+ caps-offset = <0x100>;
+
+ phy-names = "usb-phy1";
+ phys = <&usb_phy1>;
+
+ status = "disabled";
+ };
+
+ spi: spi@1f000000 {
+ compatible = "qca,ar934x-spi";
+ reg = <0x1f000000 0x1c>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ usb_phy0: usb-phy {
+ compatible = "qca,qca9560-usb-phy", "qca,ar7200-usb-phy";
+
+ reset-names = "usb-phy", "usb-suspend-override";
+ resets = <&rst 4>, <&rst 3>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_phy1: usb-phy {
+ compatible = "qca,qca9560-usb-phy", "qca,ar7200-usb-phy";
+
+ reset-names = "usb-phy", "usb-suspend-override";
+ resets = <&rst2 4>, <&rst2 3>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+};
+
+&mdio0 {
+ resets = <&rst 22>;
+ reset-names = "mdio";
+};
+
+ð0 {
+ compatible = "qca,qca9560-eth", "syscon";
+
+ pll-data = <0x03000000 0x00000101 0x00001919>;
+ pll-reg = <0 0x48 0>;
+ pll-handle = <&pll>;
+
+ resets = <&rst 9>;
+ reset-names = "mac";
+};
+
+&mdio1 {
+ status = "okay";
+ resets = <&rst 23>;
+ reset-names = "mdio";
+ builtin-switch;
+
+ builtin_switch: switch0@1f {
+ compatible = "qca,ar8229";
+ reg = <0x1f>;
+ resets = <&rst 8>;
+ reset-names = "switch";
+ phy-mode = "gmii";
+ qca,phy4-mii-enable;
+ qca,mib-poll-interval = <500>;
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ swphy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "mii";
+ };
+
+ swphy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "mii";
+ };
+ };
+ };
+};
+
+ð1 {
+ compatible = "qca,qca9560-eth", "syscon";
+
+ phy-mode = "gmii";
+
+ resets = <&rst 13>;
+ reset-names = "mac";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
diff --git a/target/linux/ath79/dts/tp9343_tplink_tl-wa901nd-v4.dts b/target/linux/ath79/dts/tp9343_tplink_tl-wa901nd-v4.dts
new file mode 100644
index 0000000..19f7e6e
--- /dev/null
+++ b/target/linux/ath79/dts/tp9343_tplink_tl-wa901nd-v4.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "tp9343_tplink_tl-wa901nd.dtsi"
+
+/ {
+ compatible = "tplink,tl-wa901nd-v4", "qca,tp9343";
+ model = "TP-Link TL-WA901ND v4";
+};
diff --git a/target/linux/ath79/dts/tp9343_tplink_tl-wa901nd-v5.dts b/target/linux/ath79/dts/tp9343_tplink_tl-wa901nd-v5.dts
new file mode 100644
index 0000000..e0fbd73
--- /dev/null
+++ b/target/linux/ath79/dts/tp9343_tplink_tl-wa901nd-v5.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "tp9343_tplink_tl-wa901nd.dtsi"
+
+/ {
+ compatible = "tplink,tl-wa901nd-v5", "qca,tp9343";
+ model = "TP-Link TL-WA901ND v5";
+};
diff --git a/target/linux/ath79/dts/tp9343_tplink_tl-wa901nd.dtsi b/target/linux/ath79/dts/tp9343_tplink_tl-wa901nd.dtsi
new file mode 100644
index 0000000..6b27468
--- /dev/null
+++ b/target/linux/ath79/dts/tp9343_tplink_tl-wa901nd.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "tp9343_tplink_tl-wx.dtsi"
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ qss {
+ label = "green:qss";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+ð1 {
+ compatible = "syscon", "simple-mfd";
+};
diff --git a/target/linux/ath79/dts/tp9343_tplink_tl-wr940n-v3.dts b/target/linux/ath79/dts/tp9343_tplink_tl-wr940n-v3.dts
new file mode 100644
index 0000000..d892037
--- /dev/null
+++ b/target/linux/ath79/dts/tp9343_tplink_tl-wr940n-v3.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "tp9343_tplink_tl-wr940n-v3.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr940n-v3", "qca,tp9343";
+ model = "TP-Link TL-WR940N v3";
+};
diff --git a/target/linux/ath79/dts/tp9343_tplink_tl-wr940n-v3.dtsi b/target/linux/ath79/dts/tp9343_tplink_tl-wr940n-v3.dtsi
new file mode 100644
index 0000000..5c897b1
--- /dev/null
+++ b/target/linux/ath79/dts/tp9343_tplink_tl-wr940n-v3.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "tp9343_tplink_tl-wr94x.dtsi"
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "blue:system";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ qss {
+ label = "blue:qss";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "blue:wlan";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wan_blue {
+ label = "blue:wan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_red {
+ label = "red:wan";
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan1 {
+ label = "blue:lan1";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "blue:lan2";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "blue:lan3";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "blue:lan4";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+ð1 {
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+};
diff --git a/target/linux/ath79/dts/tp9343_tplink_tl-wr940n-v4.dts b/target/linux/ath79/dts/tp9343_tplink_tl-wr940n-v4.dts
new file mode 100644
index 0000000..21a2be9
--- /dev/null
+++ b/target/linux/ath79/dts/tp9343_tplink_tl-wr940n-v4.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "tp9343_tplink_tl-wr94x.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr940n-v4", "qca,tp9343";
+ model = "TP-Link TL-WR940N v4";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "blue:system";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ qss {
+ label = "blue:qss";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "blue:wlan";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wan_blue {
+ label = "blue:wan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_red {
+ label = "red:wan";
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan1 {
+ label = "blue:lan1";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "blue:lan2";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "blue:lan3";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "blue:lan4";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+ð1 {
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/tp9343_tplink_tl-wr940n-v6.dts b/target/linux/ath79/dts/tp9343_tplink_tl-wr940n-v6.dts
new file mode 100644
index 0000000..4334b70
--- /dev/null
+++ b/target/linux/ath79/dts/tp9343_tplink_tl-wr940n-v6.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "tp9343_tplink_tl-wr94x.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr940n-v6", "qca,tp9343";
+ model = "TP-Link TL-WR940N v6";
+
+ aliases {
+ led-boot = &led_diag_orange;
+ led-failsafe = &led_diag_orange;
+ led-running = &led_diag_orange;
+ led-upgrade = &led_diag_orange;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wan_blue {
+ label = "blue:wan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_diag_orange: diag_orange {
+ label = "orange:diag";
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+};
+
+ð1 {
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/dts/tp9343_tplink_tl-wr941nd-v6.dts b/target/linux/ath79/dts/tp9343_tplink_tl-wr941nd-v6.dts
new file mode 100644
index 0000000..74ea95f
--- /dev/null
+++ b/target/linux/ath79/dts/tp9343_tplink_tl-wr941nd-v6.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "tp9343_tplink_tl-wr940n-v3.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr941nd-v6", "qca,tp9343";
+ model = "TP-Link TL-WR941ND v6";
+};
diff --git a/target/linux/ath79/dts/tp9343_tplink_tl-wr94x.dtsi b/target/linux/ath79/dts/tp9343_tplink_tl-wr94x.dtsi
new file mode 100644
index 0000000..ea30d3b
--- /dev/null
+++ b/target/linux/ath79/dts/tp9343_tplink_tl-wr94x.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "tp9343_tplink_tl-wx.dtsi"
+
+/ {
+ keys {
+ compatible = "gpio-keys";
+
+ wifi {
+ label = "WiFi button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/tp9343_tplink_tl-wx.dtsi b/target/linux/ath79/dts/tp9343_tplink_tl-wx.dtsi
new file mode 100644
index 0000000..3107912
--- /dev/null
+++ b/target/linux/ath79/dts/tp9343_tplink_tl-wx.dtsi
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = &wmac;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x3d0000>;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};