ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/target/linux/bcm63xx/dts/bcm6318.dtsi b/target/linux/bcm63xx/dts/bcm6318.dtsi
new file mode 100644
index 0000000..ee7db04
--- /dev/null
+++ b/target/linux/bcm63xx/dts/bcm6318.dtsi
@@ -0,0 +1,202 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm6318";
+
+ aliases {
+ pinctrl = &pinctrl;
+ serial0 = &uart0;
+ spi1 = &hsspi;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "brcm,bmips3300", "mips,mips4Kc";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ memory { device_type = "memory"; reg = <0 0>; };
+
+ ubus@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+ interrupt-parent = <&periph_intc>;
+
+ ext_intc: interrupt-controller@10000018 {
+ compatible = "brcm,bcm6318-ext-intc";
+ reg = <0x10000018 0x4>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupts = <24>, <25>, <26>, <27>;
+ };
+
+ periph_intc: interrupt-controller@10000020 {
+ compatible = "brcm,bcm6345-l1-intc";
+ reg = <0x10000020 0x20>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>;
+ };
+
+ pinctrl: pin-controller@10000080 {
+ compatible = "brcm,bcm6318-pinctrl";
+ reg = <0x10000080 0x08>,
+ <0x10000088 0x08>,
+ <0x10000098 0x04>,
+ <0x1000009c 0x0c>,
+ <0x100000d4 0x18>;
+ reg-names = "dirout", "dat", "mode", "mux", "pad";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-parent = <&ext_intc>;
+ interrupts = <0 0>, <1 0>;
+ interrupt-names = "gpio33", "gpio34";
+
+ pinctrl_ephy0_spd_led: ephy0_spd_led {
+ function = "ephy0_spd_led";
+ pins = "gpio0";
+ };
+
+ pinctrl_ephy1_spd_led: ephy1_spd_led {
+ function = "ephy1_spd_led";
+ pins = "gpio1";
+ };
+
+ pinctrl_ephy2_spd_led: ephy2_spd_led {
+ function = "ephy2_spd_led";
+ pins = "gpio2";
+ };
+
+ pinctrl_ephy3_spd_led: ephy3_spd_led {
+ function = "ephy3_spd_led";
+ pins = "gpio3";
+ };
+
+ pinctrl_ephy0_act_led: ephy0_act_led {
+ function = "ephy0_act_led";
+ pins = "gpio4";
+ };
+
+ pinctrl_ephy1_act_led: ephy1_act_led {
+ function = "ephy1_act_led";
+ pins = "gpio5";
+ };
+
+ pinctrl_ephy2_act_led: ephy2_act_led {
+ function = "ephy2_act_led";
+ pins = "gpio6";
+ };
+
+ pinctrl_ephy3_act_led: ephy3_act_led {
+ function = "ephy3_act_led";
+ pins = "gpio7";
+ };
+
+ pinctrl_serial_led: serial_led {
+ pinctrl_serial_led_data: serial_led_data {
+ function = "serial_led_data";
+ pins = "gpio6";
+ };
+
+ pinctrl_serial_led_clk: serial_led_clk {
+ function = "serial_led_clk";
+ pins = "gpio7";
+ };
+ };
+
+ pinctrl_inet_act_led: inet_act_led {
+ function = "inet_act_led";
+ pins = "gpio8";
+ };
+
+ pinctrl_inet_fail_led: inet_fail_led {
+ function = "inet_fail_led";
+ pins = "gpio9";
+ };
+
+ pinctrl_dsl_led: dsl_led {
+ function = "dsl_led";
+ pins = "gpio10";
+ };
+
+ pinctrl_post_fail_led: post_fail_led {
+ function = "post_fail_led";
+ pins = "gpio11";
+ };
+
+ pinctrl_wlan_wps_led: wlan_wps_led {
+ function = "wlan_wps_led";
+ pins = "gpio12";
+ };
+
+ pinctrl_usb_pwron: usb_pwron {
+ function = "usb_pwron";
+ pins = "gpio13";
+ };
+
+ pinctrl_usb_device_led: usb_device_led {
+ function = "usb_device_led";
+ pins = "gpio13";
+ };
+
+ pinctrl_usb_active: usb_active {
+ function = "usb_active";
+ pins = "gpio40";
+ };
+ };
+
+ uart0: serial@10000100 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000100 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <28>;
+
+ /* clocks = <&periph_clk>; */
+ /* clock-names = "refclk"; */
+
+ status = "disabled";
+ };
+
+ leds: led-controller@10000200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6328-leds";
+ reg = <0x10000200 0x24>;
+ status = "disabled";
+ };
+
+ hsspi: spi@10003000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6328-hsspi";
+ reg = <0x10003000 0x600>;
+ interrupts = <29>;
+ /* clocks = <&clkctl 25>; */
+ };
+ };
+};