ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/target/linux/generic/files/drivers/net/phy/mvswitch.c b/target/linux/generic/files/drivers/net/phy/mvswitch.c
new file mode 100644
index 0000000..bd3b9e1
--- /dev/null
+++ b/target/linux/generic/files/drivers/net/phy/mvswitch.c
@@ -0,0 +1,446 @@
+/*
+ * Marvell 88E6060 switch driver
+ * Copyright (c) 2008 Felix Fietkau <nbd@nbd.name>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/if_vlan.h>
+#include <linux/version.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include "mvswitch.h"
+
+/* Undefine this to use trailer mode instead.
+ * I don't know if header mode works with all chips */
+#define HEADER_MODE 1
+
+MODULE_DESCRIPTION("Marvell 88E6060 Switch driver");
+MODULE_AUTHOR("Felix Fietkau");
+MODULE_LICENSE("GPL");
+
+#define MVSWITCH_MAGIC 0x88E6060
+
+struct mvswitch_priv {
+ netdev_features_t orig_features;
+ u8 vlans[16];
+};
+
+#define to_mvsw(_phy) ((struct mvswitch_priv *) (_phy)->priv)
+
+static inline u16
+r16(struct phy_device *phydev, int addr, int reg)
+{
+ struct mii_bus *bus = phydev->mdio.bus;
+
+ return bus->read(bus, addr, reg);
+}
+
+static inline void
+w16(struct phy_device *phydev, int addr, int reg, u16 val)
+{
+ struct mii_bus *bus = phydev->mdio.bus;
+
+ bus->write(bus, addr, reg, val);
+}
+
+
+static struct sk_buff *
+mvswitch_mangle_tx(struct net_device *dev, struct sk_buff *skb)
+{
+ struct mvswitch_priv *priv;
+ char *buf = NULL;
+ u16 vid;
+
+ priv = dev->phy_ptr;
+ if (unlikely(!priv))
+ goto error;
+
+ if (unlikely(skb->len < 16))
+ goto error;
+
+#ifdef HEADER_MODE
+ if (__vlan_hwaccel_get_tag(skb, &vid))
+ goto error;
+
+ if (skb_cloned(skb) || (skb->len <= 62) || (skb_headroom(skb) < MV_HEADER_SIZE)) {
+ if (pskb_expand_head(skb, MV_HEADER_SIZE, (skb->len < 62 ? 62 - skb->len : 0), GFP_ATOMIC))
+ goto error_expand;
+ if (skb->len < 62)
+ skb->len = 62;
+ }
+ buf = skb_push(skb, MV_HEADER_SIZE);
+#else
+ if (__vlan_get_tag(skb, &vid))
+ goto error;
+
+ if (unlikely((vid > 15 || !priv->vlans[vid])))
+ goto error;
+
+ if (skb->len <= 64) {
+ if (pskb_expand_head(skb, 0, 64 + MV_TRAILER_SIZE - skb->len, GFP_ATOMIC))
+ goto error_expand;
+
+ buf = skb->data + 64;
+ skb->len = 64 + MV_TRAILER_SIZE;
+ } else {
+ if (skb_cloned(skb) || unlikely(skb_tailroom(skb) < 4)) {
+ if (pskb_expand_head(skb, 0, 4, GFP_ATOMIC))
+ goto error_expand;
+ }
+ buf = skb_put(skb, 4);
+ }
+
+ /* move the ethernet header 4 bytes forward, overwriting the vlan tag */
+ memmove(skb->data + 4, skb->data, 12);
+ skb->data += 4;
+ skb->len -= 4;
+ skb->mac_header += 4;
+#endif
+
+ if (!buf)
+ goto error;
+
+
+#ifdef HEADER_MODE
+ /* prepend the tag */
+ *((__be16 *) buf) = cpu_to_be16(
+ ((vid << MV_HEADER_VLAN_S) & MV_HEADER_VLAN_M) |
+ ((priv->vlans[vid] << MV_HEADER_PORTS_S) & MV_HEADER_PORTS_M)
+ );
+#else
+ /* append the tag */
+ *((__be32 *) buf) = cpu_to_be32((
+ (MV_TRAILER_OVERRIDE << MV_TRAILER_FLAGS_S) |
+ ((priv->vlans[vid] & MV_TRAILER_PORTS_M) << MV_TRAILER_PORTS_S)
+ ));
+#endif
+
+ return skb;
+
+error_expand:
+ if (net_ratelimit())
+ printk("%s: failed to expand/update skb for the switch\n", dev->name);
+
+error:
+ /* any errors? drop the packet! */
+ dev_kfree_skb_any(skb);
+ return NULL;
+}
+
+static void
+mvswitch_mangle_rx(struct net_device *dev, struct sk_buff *skb)
+{
+ struct mvswitch_priv *priv;
+ unsigned char *buf;
+ int vlan = -1;
+ int i;
+
+ priv = dev->phy_ptr;
+ if (WARN_ON_ONCE(!priv))
+ return;
+
+#ifdef HEADER_MODE
+ buf = skb->data;
+ skb_pull(skb, MV_HEADER_SIZE);
+#else
+ buf = skb->data + skb->len - MV_TRAILER_SIZE;
+ if (buf[0] != 0x80)
+ return;
+#endif
+
+ /* look for the vlan matching the incoming port */
+ for (i = 0; i < ARRAY_SIZE(priv->vlans); i++) {
+ if ((1 << buf[1]) & priv->vlans[i])
+ vlan = i;
+ }
+
+ if (vlan == -1)
+ return;
+
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan);
+}
+
+
+static int
+mvswitch_wait_mask(struct phy_device *pdev, int addr, int reg, u16 mask, u16 val)
+{
+ int i = 100;
+ u16 r;
+
+ do {
+ r = r16(pdev, addr, reg) & mask;
+ if (r == val)
+ return 0;
+ } while(--i > 0);
+ return -ETIMEDOUT;
+}
+
+static int
+mvswitch_config_init(struct phy_device *pdev)
+{
+ struct mvswitch_priv *priv = to_mvsw(pdev);
+ struct net_device *dev = pdev->attached_dev;
+ u8 vlmap = 0;
+ int i;
+
+ if (!dev)
+ return -EINVAL;
+
+ printk("%s: Marvell 88E6060 PHY driver attached.\n", dev->name);
+ linkmode_zero(pdev->supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, pdev->supported);
+ linkmode_copy(pdev->advertising, pdev->supported);
+ dev->phy_ptr = priv;
+ pdev->irq = PHY_POLL;
+#ifdef HEADER_MODE
+ dev->flags |= IFF_PROMISC;
+#endif
+
+ /* initialize default vlans */
+ for (i = 0; i < MV_PORTS; i++)
+ priv->vlans[(i == MV_WANPORT ? 2 : 1)] |= (1 << i);
+
+ /* before entering reset, disable all ports */
+ for (i = 0; i < MV_PORTS; i++)
+ w16(pdev, MV_PORTREG(CONTROL, i), 0x00);
+
+ msleep(2); /* wait for the status change to settle in */
+
+ /* put the ATU in reset */
+ w16(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET);
+
+ i = mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET, 0);
+ if (i < 0) {
+ printk("%s: Timeout waiting for the switch to reset.\n", dev->name);
+ return i;
+ }
+
+ /* set the ATU flags */
+ w16(pdev, MV_SWITCHREG(ATU_CTRL),
+ MV_ATUCTL_NO_LEARN |
+ MV_ATUCTL_ATU_1K |
+ MV_ATUCTL_AGETIME(MV_ATUCTL_AGETIME_MIN) /* minimum without disabling ageing */
+ );
+
+ /* initialize the cpu port */
+ w16(pdev, MV_PORTREG(CONTROL, MV_CPUPORT),
+#ifdef HEADER_MODE
+ MV_PORTCTRL_HEADER |
+#else
+ MV_PORTCTRL_RXTR |
+ MV_PORTCTRL_TXTR |
+#endif
+ MV_PORTCTRL_ENABLED
+ );
+ /* wait for the phy change to settle in */
+ msleep(2);
+ for (i = 0; i < MV_PORTS; i++) {
+ u8 pvid = 0;
+ int j;
+
+ vlmap = 0;
+
+ /* look for the matching vlan */
+ for (j = 0; j < ARRAY_SIZE(priv->vlans); j++) {
+ if (priv->vlans[j] & (1 << i)) {
+ vlmap = priv->vlans[j];
+ pvid = j;
+ }
+ }
+ /* leave port unconfigured if it's not part of a vlan */
+ if (!vlmap)
+ continue;
+
+ /* add the cpu port to the allowed destinations list */
+ vlmap |= (1 << MV_CPUPORT);
+
+ /* take port out of its own vlan destination map */
+ vlmap &= ~(1 << i);
+
+ /* apply vlan settings */
+ w16(pdev, MV_PORTREG(VLANMAP, i),
+ MV_PORTVLAN_PORTS(vlmap) |
+ MV_PORTVLAN_ID(i)
+ );
+
+ /* re-enable port */
+ w16(pdev, MV_PORTREG(CONTROL, i),
+ MV_PORTCTRL_ENABLED
+ );
+ }
+
+ w16(pdev, MV_PORTREG(VLANMAP, MV_CPUPORT),
+ MV_PORTVLAN_ID(MV_CPUPORT)
+ );
+
+ /* set the port association vector */
+ for (i = 0; i <= MV_PORTS; i++) {
+ w16(pdev, MV_PORTREG(ASSOC, i),
+ MV_PORTASSOC_PORTS(1 << i)
+ );
+ }
+
+ /* init switch control */
+ w16(pdev, MV_SWITCHREG(CTRL),
+ MV_SWITCHCTL_MSIZE |
+ MV_SWITCHCTL_DROP
+ );
+
+ dev->eth_mangle_rx = mvswitch_mangle_rx;
+ dev->eth_mangle_tx = mvswitch_mangle_tx;
+ priv->orig_features = dev->features;
+
+#ifdef HEADER_MODE
+ dev->priv_flags |= IFF_NO_IP_ALIGN;
+ dev->features |= NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX;
+#else
+ dev->features |= NETIF_F_HW_VLAN_CTAG_RX;
+#endif
+
+ return 0;
+}
+
+static int
+mvswitch_read_status(struct phy_device *pdev)
+{
+ pdev->speed = SPEED_100;
+ pdev->duplex = DUPLEX_FULL;
+ pdev->link = 1;
+
+ /* XXX ugly workaround: we can't force the switch
+ * to gracefully handle hosts moving from one port to another,
+ * so we have to regularly clear the ATU database */
+
+ /* wait for the ATU to become available */
+ mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0);
+
+ /* flush the ATU */
+ w16(pdev, MV_SWITCHREG(ATU_OP),
+ MV_ATUOP_INPROGRESS |
+ MV_ATUOP_FLUSH_ALL
+ );
+
+ /* wait for operation to complete */
+ mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0);
+
+ return 0;
+}
+
+static int
+mvswitch_aneg_done(struct phy_device *phydev)
+{
+ return 1; /* Return any positive value */
+}
+
+static int
+mvswitch_config_aneg(struct phy_device *phydev)
+{
+ return 0;
+}
+
+static void
+mvswitch_detach(struct phy_device *pdev)
+{
+ struct mvswitch_priv *priv = to_mvsw(pdev);
+ struct net_device *dev = pdev->attached_dev;
+
+ if (!dev)
+ return;
+
+ dev->phy_ptr = NULL;
+ dev->eth_mangle_rx = NULL;
+ dev->eth_mangle_tx = NULL;
+ dev->features = priv->orig_features;
+ dev->priv_flags &= ~IFF_NO_IP_ALIGN;
+}
+
+static void
+mvswitch_remove(struct phy_device *pdev)
+{
+ struct mvswitch_priv *priv = to_mvsw(pdev);
+
+ kfree(priv);
+}
+
+static int
+mvswitch_probe(struct phy_device *pdev)
+{
+ struct mvswitch_priv *priv;
+
+ priv = kzalloc(sizeof(struct mvswitch_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return -ENOMEM;
+
+ pdev->priv = priv;
+
+ return 0;
+}
+
+static int
+mvswitch_fixup(struct phy_device *dev)
+{
+ struct mii_bus *bus = dev->mdio.bus;
+ u16 reg;
+
+ if (dev->mdio.addr != 0x10)
+ return 0;
+
+ reg = bus->read(bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK;
+ if (reg != MV_IDENT_VALUE)
+ return 0;
+
+ dev->phy_id = MVSWITCH_MAGIC;
+ return 0;
+}
+
+
+static struct phy_driver mvswitch_driver = {
+ .name = "Marvell 88E6060",
+ .phy_id = MVSWITCH_MAGIC,
+ .phy_id_mask = 0xffffffff,
+ .features = PHY_BASIC_FEATURES,
+ .probe = &mvswitch_probe,
+ .remove = &mvswitch_remove,
+ .detach = &mvswitch_detach,
+ .config_init = &mvswitch_config_init,
+ .config_aneg = &mvswitch_config_aneg,
+ .aneg_done = &mvswitch_aneg_done,
+ .read_status = &mvswitch_read_status,
+};
+
+static int __init
+mvswitch_init(void)
+{
+ phy_register_fixup_for_id(PHY_ANY_ID, mvswitch_fixup);
+ return phy_driver_register(&mvswitch_driver, THIS_MODULE);
+}
+
+static void __exit
+mvswitch_exit(void)
+{
+ phy_driver_unregister(&mvswitch_driver);
+}
+
+module_init(mvswitch_init);
+module_exit(mvswitch_exit);