ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/target/linux/generic/pending-5.4/180-net-phy-at803x-add-support-for-AT8032.patch b/target/linux/generic/pending-5.4/180-net-phy-at803x-add-support-for-AT8032.patch
new file mode 100644
index 0000000..9b88282
--- /dev/null
+++ b/target/linux/generic/pending-5.4/180-net-phy-at803x-add-support-for-AT8032.patch
@@ -0,0 +1,63 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: net: phy: at803x: add support for AT8032
+
+Like AT8030, this PHY needs the GPIO reset workaround
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -64,8 +64,10 @@
+
+ #define ATH8030_PHY_ID 0x004dd076
+ #define ATH8031_PHY_ID 0x004dd074
++#define ATH8032_PHY_ID 0x004dd023
+ #define ATH8035_PHY_ID 0x004dd072
+ #define AT803X_PHY_ID_MASK 0xffffffef
++#define AT8032_PHY_ID_MASK 0xffffffff
+
+ MODULE_DESCRIPTION("Atheros 803x PHY driver");
+ MODULE_AUTHOR("Matus Ujhelyi");
+@@ -314,7 +316,7 @@ static int at803x_config_intr(struct phy
+ static void at803x_link_change_notify(struct phy_device *phydev)
+ {
+ /*
+- * Conduct a hardware reset for AT8030 every time a link loss is
++ * Conduct a hardware reset for AT8030/2 every time a link loss is
+ * signalled. This is necessary to circumvent a hardware bug that
+ * occurs when the cable is unplugged while TX packets are pending
+ * in the FIFO. In such cases, the FIFO enters an error mode it
+@@ -471,6 +473,24 @@ static struct phy_driver at803x_driver[]
+ .aneg_done = at803x_aneg_done,
+ .ack_interrupt = &at803x_ack_interrupt,
+ .config_intr = &at803x_config_intr,
++}, {
++ /* ATHEROS 8032 */
++ .phy_id = ATH8032_PHY_ID,
++ .name = "Atheros 8032 ethernet",
++ .phy_id_mask = AT8032_PHY_ID_MASK,
++ .probe = at803x_probe,
++ .config_init = at803x_config_init,
++ .link_change_notify = at803x_link_change_notify,
++ .set_wol = at803x_set_wol,
++ .get_wol = at803x_get_wol,
++ .suspend = at803x_suspend,
++ .resume = at803x_resume,
++ /* PHY_BASIC_FEATURES */
++ .read_status = at803x_read_status,
++ .config_aneg = genphy_config_aneg,
++ .read_status = genphy_read_status,
++ .ack_interrupt = at803x_ack_interrupt,
++ .config_intr = at803x_config_intr,
+ } };
+
+ module_phy_driver(at803x_driver);
+@@ -478,6 +498,7 @@ module_phy_driver(at803x_driver);
+ static struct mdio_device_id __maybe_unused atheros_tbl[] = {
+ { ATH8030_PHY_ID, AT803X_PHY_ID_MASK },
+ { ATH8031_PHY_ID, AT803X_PHY_ID_MASK },
++ { ATH8032_PHY_ID, AT8032_PHY_ID_MASK },
+ { ATH8035_PHY_ID, AT803X_PHY_ID_MASK },
+ { }
+ };