diff --git a/target/linux/ipq40xx/patches-5.4/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch b/target/linux/ipq40xx/patches-5.4/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch
new file mode 100644
index 0000000..5b1372d
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.4/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch
@@ -0,0 +1,419 @@
+From 59e056cda4beb5412e3653e6360c2eb0fa770baa Mon Sep 17 00:00:00 2001
+From: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Date: Fri, 20 Dec 2019 16:02:18 -0300
+Subject: [PATCH 07/11] crypto: qce - allow building only hashes/ciphers
+
+Allow the user to choose whether to build support for all algorithms
+(default), hashes-only, or skciphers-only.
+
+The QCE engine does not appear to scale as well as the CPU to handle
+multiple crypto requests.  While the ipq40xx chips have 4-core CPUs, the
+QCE handles only 2 requests in parallel.
+
+Ipsec throughput seems to improve when disabling either family of
+algorithms, sharing the load with the CPU.  Enabling skciphers-only
+appears to work best.
+
+Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+---
+
+--- a/drivers/crypto/Kconfig
++++ b/drivers/crypto/Kconfig
+@@ -617,6 +617,14 @@ config CRYPTO_DEV_QCE
+ 	tristate "Qualcomm crypto engine accelerator"
+ 	depends on ARCH_QCOM || COMPILE_TEST
+ 	depends on HAS_IOMEM
++	help
++	  This driver supports Qualcomm crypto engine accelerator
++	  hardware. To compile this driver as a module, choose M here. The
++	  module will be called qcrypto.
++
++config CRYPTO_DEV_QCE_SKCIPHER
++	bool
++	depends on CRYPTO_DEV_QCE
+ 	select CRYPTO_AES
+ 	select CRYPTO_LIB_DES
+ 	select CRYPTO_ECB
+@@ -624,10 +632,57 @@ config CRYPTO_DEV_QCE
+ 	select CRYPTO_XTS
+ 	select CRYPTO_CTR
+ 	select CRYPTO_BLKCIPHER
++
++config CRYPTO_DEV_QCE_SHA
++	bool
++	depends on CRYPTO_DEV_QCE
++
++choice
++	prompt "Algorithms enabled for QCE acceleration"
++	default CRYPTO_DEV_QCE_ENABLE_ALL
++	depends on CRYPTO_DEV_QCE
+ 	help
+-	  This driver supports Qualcomm crypto engine accelerator
+-	  hardware. To compile this driver as a module, choose M here. The
+-	  module will be called qcrypto.
++	  This option allows to choose whether to build support for all algorihtms
++	  (default), hashes-only, or skciphers-only.
++
++	  The QCE engine does not appear to scale as well as the CPU to handle
++	  multiple crypto requests.  While the ipq40xx chips have 4-core CPUs, the
++	  QCE handles only 2 requests in parallel.
++
++	  Ipsec throughput seems to improve when disabling either family of
++	  algorithms, sharing the load with the CPU.  Enabling skciphers-only
++	  appears to work best.
++
++	config CRYPTO_DEV_QCE_ENABLE_ALL
++		bool "All supported algorithms"
++		select CRYPTO_DEV_QCE_SKCIPHER
++		select CRYPTO_DEV_QCE_SHA
++		help
++		  Enable all supported algorithms:
++			- AES (CBC, CTR, ECB, XTS)
++			- 3DES (CBC, ECB)
++			- DES (CBC, ECB)
++			- SHA1, HMAC-SHA1
++			- SHA256, HMAC-SHA256
++
++	config CRYPTO_DEV_QCE_ENABLE_SKCIPHER
++		bool "Symmetric-key ciphers only"
++		select CRYPTO_DEV_QCE_SKCIPHER
++		help
++		  Enable symmetric-key ciphers only:
++			- AES (CBC, CTR, ECB, XTS)
++			- 3DES (ECB, CBC)
++			- DES (ECB, CBC)
++
++	config CRYPTO_DEV_QCE_ENABLE_SHA
++		bool "Hash/HMAC only"
++		select CRYPTO_DEV_QCE_SHA
++		help
++		  Enable hashes/HMAC algorithms only:
++			- SHA1, HMAC-SHA1
++			- SHA256, HMAC-SHA256
++
++endchoice
+ 
+ config CRYPTO_DEV_QCOM_RNG
+ 	tristate "Qualcomm Random Number Generator Driver"
+--- a/drivers/crypto/qce/Makefile
++++ b/drivers/crypto/qce/Makefile
+@@ -2,6 +2,7 @@
+ obj-$(CONFIG_CRYPTO_DEV_QCE) += qcrypto.o
+ qcrypto-objs := core.o \
+ 		common.o \
+-		dma.o \
+-		sha.o \
+-		skcipher.o
++		dma.o
++
++qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SHA) += sha.o
++qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SKCIPHER) += skcipher.o
+--- a/drivers/crypto/qce/common.c
++++ b/drivers/crypto/qce/common.c
+@@ -45,52 +45,56 @@ qce_clear_array(struct qce_device *qce,
+ 		qce_write(qce, offset + i * sizeof(u32), 0);
+ }
+ 
+-static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size)
++static u32 qce_config_reg(struct qce_device *qce, int little)
+ {
+-	u32 cfg = 0;
++	u32 beats = (qce->burst_size >> 3) - 1;
++	u32 pipe_pair = qce->pipe_pair_id;
++	u32 config;
+ 
+-	if (IS_AES(flags)) {
+-		if (aes_key_size == AES_KEYSIZE_128)
+-			cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT;
+-		else if (aes_key_size == AES_KEYSIZE_256)
+-			cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT;
+-	}
++	config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK;
++	config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) |
++		  BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT);
++	config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK;
++	config &= ~HIGH_SPD_EN_N_SHIFT;
+ 
+-	if (IS_AES(flags))
+-		cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT;
+-	else if (IS_DES(flags) || IS_3DES(flags))
+-		cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT;
++	if (little)
++		config |= BIT(LITTLE_ENDIAN_MODE_SHIFT);
+ 
+-	if (IS_DES(flags))
+-		cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT;
++	return config;
++}
+ 
+-	if (IS_3DES(flags))
+-		cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT;
++void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len)
++{
++	__be32 *d = dst;
++	const u8 *s = src;
++	unsigned int n;
+ 
+-	switch (flags & QCE_MODE_MASK) {
+-	case QCE_MODE_ECB:
+-		cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT;
+-		break;
+-	case QCE_MODE_CBC:
+-		cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT;
+-		break;
+-	case QCE_MODE_CTR:
+-		cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT;
+-		break;
+-	case QCE_MODE_XTS:
+-		cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT;
+-		break;
+-	case QCE_MODE_CCM:
+-		cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT;
+-		cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT;
+-		break;
+-	default:
+-		return ~0;
++	n = len / sizeof(u32);
++	for (; n > 0; n--) {
++		*d = cpu_to_be32p((const __u32 *) s);
++		s += sizeof(__u32);
++		d++;
+ 	}
++}
+ 
+-	return cfg;
++static void qce_setup_config(struct qce_device *qce)
++{
++	u32 config;
++
++	/* get big endianness */
++	config = qce_config_reg(qce, 0);
++
++	/* clear status */
++	qce_write(qce, REG_STATUS, 0);
++	qce_write(qce, REG_CONFIG, config);
++}
++
++static inline void qce_crypto_go(struct qce_device *qce)
++{
++	qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT));
+ }
+ 
++#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
+ static u32 qce_auth_cfg(unsigned long flags, u32 key_size)
+ {
+ 	u32 cfg = 0;
+@@ -137,88 +141,6 @@ static u32 qce_auth_cfg(unsigned long fl
+ 	return cfg;
+ }
+ 
+-static u32 qce_config_reg(struct qce_device *qce, int little)
+-{
+-	u32 beats = (qce->burst_size >> 3) - 1;
+-	u32 pipe_pair = qce->pipe_pair_id;
+-	u32 config;
+-
+-	config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK;
+-	config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) |
+-		  BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT);
+-	config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK;
+-	config &= ~HIGH_SPD_EN_N_SHIFT;
+-
+-	if (little)
+-		config |= BIT(LITTLE_ENDIAN_MODE_SHIFT);
+-
+-	return config;
+-}
+-
+-void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len)
+-{
+-	__be32 *d = dst;
+-	const u8 *s = src;
+-	unsigned int n;
+-
+-	n = len / sizeof(u32);
+-	for (; n > 0; n--) {
+-		*d = cpu_to_be32p((const __u32 *) s);
+-		s += sizeof(__u32);
+-		d++;
+-	}
+-}
+-
+-static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize)
+-{
+-	u8 swap[QCE_AES_IV_LENGTH];
+-	u32 i, j;
+-
+-	if (ivsize > QCE_AES_IV_LENGTH)
+-		return;
+-
+-	memset(swap, 0, QCE_AES_IV_LENGTH);
+-
+-	for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1;
+-	     i < QCE_AES_IV_LENGTH; i++, j--)
+-		swap[i] = src[j];
+-
+-	qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH);
+-}
+-
+-static void qce_xtskey(struct qce_device *qce, const u8 *enckey,
+-		       unsigned int enckeylen, unsigned int cryptlen)
+-{
+-	u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0};
+-	unsigned int xtsklen = enckeylen / (2 * sizeof(u32));
+-	unsigned int xtsdusize;
+-
+-	qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2,
+-			       enckeylen / 2);
+-	qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen);
+-
+-	/* xts du size 512B */
+-	xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen);
+-	qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize);
+-}
+-
+-static void qce_setup_config(struct qce_device *qce)
+-{
+-	u32 config;
+-
+-	/* get big endianness */
+-	config = qce_config_reg(qce, 0);
+-
+-	/* clear status */
+-	qce_write(qce, REG_STATUS, 0);
+-	qce_write(qce, REG_CONFIG, config);
+-}
+-
+-static inline void qce_crypto_go(struct qce_device *qce)
+-{
+-	qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT));
+-}
+-
+ static int qce_setup_regs_ahash(struct crypto_async_request *async_req,
+ 				u32 totallen, u32 offset)
+ {
+@@ -303,6 +225,87 @@ go_proc:
+ 
+ 	return 0;
+ }
++#endif
++
++#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
++static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size)
++{
++	u32 cfg = 0;
++
++	if (IS_AES(flags)) {
++		if (aes_key_size == AES_KEYSIZE_128)
++			cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT;
++		else if (aes_key_size == AES_KEYSIZE_256)
++			cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT;
++	}
++
++	if (IS_AES(flags))
++		cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT;
++	else if (IS_DES(flags) || IS_3DES(flags))
++		cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT;
++
++	if (IS_DES(flags))
++		cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT;
++
++	if (IS_3DES(flags))
++		cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT;
++
++	switch (flags & QCE_MODE_MASK) {
++	case QCE_MODE_ECB:
++		cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT;
++		break;
++	case QCE_MODE_CBC:
++		cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT;
++		break;
++	case QCE_MODE_CTR:
++		cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT;
++		break;
++	case QCE_MODE_XTS:
++		cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT;
++		break;
++	case QCE_MODE_CCM:
++		cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT;
++		cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT;
++		break;
++	default:
++		return ~0;
++	}
++
++	return cfg;
++}
++
++static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize)
++{
++	u8 swap[QCE_AES_IV_LENGTH];
++	u32 i, j;
++
++	if (ivsize > QCE_AES_IV_LENGTH)
++		return;
++
++	memset(swap, 0, QCE_AES_IV_LENGTH);
++
++	for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1;
++	     i < QCE_AES_IV_LENGTH; i++, j--)
++		swap[i] = src[j];
++
++	qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH);
++}
++
++static void qce_xtskey(struct qce_device *qce, const u8 *enckey,
++		       unsigned int enckeylen, unsigned int cryptlen)
++{
++	u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0};
++	unsigned int xtsklen = enckeylen / (2 * sizeof(u32));
++	unsigned int xtsdusize;
++
++	qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2,
++			       enckeylen / 2);
++	qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen);
++
++	/* xts du size 512B */
++	xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen);
++	qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize);
++}
+ 
+ static int qce_setup_regs_skcipher(struct crypto_async_request *async_req,
+ 				     u32 totallen, u32 offset)
+@@ -384,15 +387,20 @@ static int qce_setup_regs_skcipher(struc
+ 
+ 	return 0;
+ }
++#endif
+ 
+ int qce_start(struct crypto_async_request *async_req, u32 type, u32 totallen,
+ 	      u32 offset)
+ {
+ 	switch (type) {
++#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
+ 	case CRYPTO_ALG_TYPE_SKCIPHER:
+ 		return qce_setup_regs_skcipher(async_req, totallen, offset);
++#endif
++#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
+ 	case CRYPTO_ALG_TYPE_AHASH:
+ 		return qce_setup_regs_ahash(async_req, totallen, offset);
++#endif
+ 	default:
+ 		return -EINVAL;
+ 	}
+--- a/drivers/crypto/qce/core.c
++++ b/drivers/crypto/qce/core.c
+@@ -22,8 +22,12 @@
+ #define QCE_QUEUE_LENGTH	1
+ 
+ static const struct qce_algo_ops *qce_ops[] = {
++#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
+ 	&skcipher_ops,
++#endif
++#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
+ 	&ahash_ops,
++#endif
+ };
+ 
+ static void qce_unregister_algs(struct qce_device *qce)