ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/target/linux/ipq40xx/patches-5.4/702-dts-ipq4019-add-PHY-switch-nodes.patch b/target/linux/ipq40xx/patches-5.4/702-dts-ipq4019-add-PHY-switch-nodes.patch
new file mode 100644
index 0000000..d95e751
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.4/702-dts-ipq4019-add-PHY-switch-nodes.patch
@@ -0,0 +1,46 @@
+From 9deeec35dd3b628b95624e41d4e04acf728991ba Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sun, 20 Nov 2016 02:20:54 +0100
+Subject: [PATCH] dts: ipq4019: add PHY/switch nodes
+
+This patch adds both the "qcom,ess-switch" and "qcom,ess-psgmii"
+nodes which are needed for the ar40xx.c driver to initialize the
+switch.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 23 +++++++++++++++++++++++
+ 1 file changed, 23 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -617,6 +617,29 @@
+ };
+ };
+
++ ess-switch@c000000 {
++ compatible = "qcom,ess-switch";
++ reg = <0xc000000 0x80000>;
++ switch_access_mode = "local bus";
++ resets = <&gcc ESS_RESET>;
++ reset-names = "ess_rst";
++ clocks = <&gcc GCC_ESS_CLK>;
++ clock-names = "ess_clk";
++ switch_cpu_bmp = <0x1>;
++ switch_lan_bmp = <0x1e>;
++ switch_wan_bmp = <0x20>;
++ switch_mac_mode = <0>; /* PORT_WRAPPER_PSGMII */
++ switch_initvlas = <0x7c 0x54>;
++ status = "disabled";
++ };
++
++ ess-psgmii@98000 {
++ compatible = "qcom,ess-psgmii";
++ reg = <0x98000 0x800>;
++ psgmii_access_mode = "local bus";
++ status = "disabled";
++ };
++
+ usb3_ss_phy: ssphy@9a000 {
+ compatible = "qcom,usb-ss-ipq4019-phy";
+ #phy-cells = <0>;