ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0060-arm64-dts-ls1028a-add-flexspi-nodes.patch b/target/linux/layerscape/patches-5.4/302-dts-0060-arm64-dts-ls1028a-add-flexspi-nodes.patch
new file mode 100644
index 0000000..84aa239
--- /dev/null
+++ b/target/linux/layerscape/patches-5.4/302-dts-0060-arm64-dts-ls1028a-add-flexspi-nodes.patch
@@ -0,0 +1,87 @@
+From b94cbaaa2facfdc6aa49d6f323da251f9e91d4ba Mon Sep 17 00:00:00 2001
+From: Xiaowei Bao <xiaowei.bao@nxp.com>
+Date: Tue, 14 May 2019 18:17:31 +0800
+Subject: [PATCH] arm64: dts: ls1028a: add flexspi nodes
+
+Add fspi node property for LS1028A SoC for FlexSPI driver.
+Property added for the FlexSPI controller and for the connected
+slave device for the LS1028ARDB and LS1028AQDS target.
+This is having one SPI-NOR flash device, mt35xu02g connected at
+CS0.
+
+Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
+---
+ arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 15 +++++++++++++++
+ arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 15 +++++++++++++++
+ arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 12 ++++++++++++
+ 3 files changed, 42 insertions(+)
+
+--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
++++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+@@ -226,6 +226,21 @@
+ phy-connection-type = "rgmii-id";
+ };
+
++&fspi {
++ status = "okay";
++ mt35xu02g: flash@0 {
++ compatible = "spansion,m25p80";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ m25p,fast-read;
++ spi-max-frequency = <20000000>;
++ reg = <0>;
++ /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
++ spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
++ spi-tx-bus-width = <1>; /* 1 SPI Tx line */
++ };
++};
++
+ &sai1 {
+ status = "okay";
+ };
+--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
++++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+@@ -168,6 +168,21 @@
+ };
+ };
+
++&fspi {
++ status = "okay";
++ mt35xu02g: flash@0 {
++ compatible = "spansion,m25p80";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ m25p,fast-read;
++ spi-max-frequency = <20000000>;
++ reg = <0>;
++ /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
++ spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
++ spi-tx-bus-width = <1>; /* 1 SPI Tx line */
++ };
++};
++
+ &duart0 {
+ status = "okay";
+ };
+--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
++++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+@@ -180,6 +180,18 @@
+ clocks = <&sysclk>;
+ };
+
++ fspi: spi@20c0000 {
++ compatible = "nxp,lx2160a-fspi";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x20c0000 0x0 0x10000>,
++ <0x0 0x20000000 0x0 0x10000000>;
++ reg-names = "FSPI", "FSPI-memory";
++ interrupts = <0 25 0x4>; /* Level high type */
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "fspi_en", "fspi";
++ };
++
+ i2c0: i2c@2000000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;