diff --git a/target/linux/layerscape/patches-5.4/803-clock-0001-clk-ls1028a-Add-clock-driver-for-Display-output-inte.patch b/target/linux/layerscape/patches-5.4/803-clock-0001-clk-ls1028a-Add-clock-driver-for-Display-output-inte.patch
new file mode 100644
index 0000000..9d548d5
--- /dev/null
+++ b/target/linux/layerscape/patches-5.4/803-clock-0001-clk-ls1028a-Add-clock-driver-for-Display-output-inte.patch
@@ -0,0 +1,351 @@
+From e9e60d44268e2cfba73efeb7c3e68c355940f2c3 Mon Sep 17 00:00:00 2001
+From: Wen He <wen.he_1@nxp.com>
+Date: Wed, 27 Nov 2019 11:19:26 +0800
+Subject: [PATCH] clk: ls1028a: Add clock driver for Display output interface
+
+Add clock driver for QorIQ LS1028A Display output interfaces(LCD, DPHY),
+as implemented in TSMC CLN28HPM PLL, this PLL supports the programmable
+integer division and range of the display output pixel clock's 27-594MHz.
+
+Signed-off-by: Wen He <wen.he_1@nxp.com>
+Signed-off-by: Michael Walle <michael@walle.cc>
+---
+ drivers/clk/Kconfig      |  10 ++
+ drivers/clk/Makefile     |   1 +
+ drivers/clk/clk-plldig.c | 301 +++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 312 insertions(+)
+ create mode 100644 drivers/clk/clk-plldig.c
+
+--- a/drivers/clk/Kconfig
++++ b/drivers/clk/Kconfig
+@@ -218,6 +218,16 @@ config CLK_QORIQ
+ 	  This adds the clock driver support for Freescale QorIQ platforms
+ 	  using common clock framework.
+ 
++config CLK_LS1028A_PLLDIG
++        tristate "Clock driver for LS1028A Display output"
++        depends on ARCH_LAYERSCAPE || COMPILE_TEST
++        default ARCH_LAYERSCAPE
++        help
++          This driver support the Display output interfaces(LCD, DPHY) pixel clocks
++          of the QorIQ Layerscape LS1028A, as implemented TSMC CLN28HPM PLL. Not all
++          features of the PLL are currently supported by the driver. By default,
++          configured bypass mode with this PLL.
++
+ config COMMON_CLK_XGENE
+ 	bool "Clock driver for APM XGene SoC"
+ 	default ARCH_XGENE
+--- a/drivers/clk/Makefile
++++ b/drivers/clk/Makefile
+@@ -43,6 +43,7 @@ obj-$(CONFIG_ARCH_NPCM7XX)	    	+= clk-n
+ obj-$(CONFIG_ARCH_NSPIRE)		+= clk-nspire.o
+ obj-$(CONFIG_COMMON_CLK_OXNAS)		+= clk-oxnas.o
+ obj-$(CONFIG_COMMON_CLK_PALMAS)		+= clk-palmas.o
++obj-$(CONFIG_CLK_LS1028A_PLLDIG)	+= clk-plldig.o
+ obj-$(CONFIG_COMMON_CLK_PWM)		+= clk-pwm.o
+ obj-$(CONFIG_CLK_QORIQ)			+= clk-qoriq.o
+ obj-$(CONFIG_COMMON_CLK_RK808)		+= clk-rk808.o
+--- /dev/null
++++ b/drivers/clk/clk-plldig.c
+@@ -0,0 +1,301 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright 2019 NXP
++ *
++ * Clock driver for LS1028A Display output interfaces(LCD, DPHY).
++ */
++
++#include <linux/clk-provider.h>
++#include <linux/device.h>
++#include <linux/module.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/iopoll.h>
++#include <linux/of.h>
++#include <linux/of_address.h>
++#include <linux/of_device.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/bitfield.h>
++
++/* PLLDIG register offsets and bit masks */
++#define PLLDIG_REG_PLLSR            0x24
++#define PLLDIG_LOCK_MASK            BIT(2)
++#define PLLDIG_REG_PLLDV            0x28
++#define PLLDIG_MFD_MASK             GENMASK(7, 0)
++#define PLLDIG_RFDPHI1_MASK         GENMASK(30, 25)
++#define PLLDIG_REG_PLLFM            0x2c
++#define PLLDIG_SSCGBYP_ENABLE       BIT(30)
++#define PLLDIG_REG_PLLFD            0x30
++#define PLLDIG_FDEN                 BIT(30)
++#define PLLDIG_FRAC_MASK            GENMASK(15, 0)
++#define PLLDIG_DTH_MASK             GENMASK(17, 16)
++#define PLLDIG_DTH_DISABLE          3
++#define PLLDIG_REG_PLLCAL1          0x38
++#define PLLDIG_REG_PLLCAL2          0x3c
++
++/* Range of the VCO frequencies, in Hz */
++#define PLLDIG_MIN_VCO_FREQ         650000000
++#define PLLDIG_MAX_VCO_FREQ         1300000000
++
++/* Range of the output frequencies, in Hz */
++#define PHI1_MIN_FREQ               27000000
++#define PHI1_MAX_FREQ               600000000
++
++/* Maximum value of the reduced frequency divider */
++#define MAX_RFDPHI1          63UL
++
++/* Best value of multiplication factor divider */
++#define PLLDIG_DEFAULT_MFD   44
++
++/*
++ * Denominator part of the fractional part of the
++ * loop multiplication factor.
++ */
++#define MFDEN          20480
++
++static const struct clk_parent_data parent_data[] = {
++	{.index = 0},
++};
++
++struct clk_plldig {
++	struct clk_hw hw;
++	void __iomem *regs;
++	unsigned int vco_freq;
++};
++
++#define to_clk_plldig(_hw)	container_of(_hw, struct clk_plldig, hw)
++
++static int plldig_enable(struct clk_hw *hw)
++{
++	struct clk_plldig *data = to_clk_plldig(hw);
++	u32 val;
++
++	val = readl(data->regs + PLLDIG_REG_PLLFM);
++	/*
++	 * Use Bypass mode with PLL off by default, the frequency overshoot
++	 * detector output was disable. SSCG Bypass mode should be enable.
++	 */
++	val |= PLLDIG_SSCGBYP_ENABLE;
++	writel(val, data->regs + PLLDIG_REG_PLLFM);
++
++	return 0;
++}
++
++static void plldig_disable(struct clk_hw *hw)
++{
++	struct clk_plldig *data = to_clk_plldig(hw);
++	u32 val;
++
++	val = readl(data->regs + PLLDIG_REG_PLLFM);
++
++	val &= ~PLLDIG_SSCGBYP_ENABLE;
++	val |= FIELD_PREP(PLLDIG_SSCGBYP_ENABLE, 0x0);
++
++	writel(val, data->regs + PLLDIG_REG_PLLFM);
++}
++
++static int plldig_is_enabled(struct clk_hw *hw)
++{
++	struct clk_plldig *data = to_clk_plldig(hw);
++
++	return (readl(data->regs + PLLDIG_REG_PLLFM) &
++			      PLLDIG_SSCGBYP_ENABLE);
++}
++
++static unsigned long plldig_recalc_rate(struct clk_hw *hw,
++					unsigned long parent_rate)
++{
++	struct clk_plldig *data = to_clk_plldig(hw);
++	u32 val, rfdphi1;
++
++	val = readl(data->regs + PLLDIG_REG_PLLDV);
++
++	/* Check if PLL is bypassed */
++	if (val & PLLDIG_SSCGBYP_ENABLE)
++		return parent_rate;
++
++	rfdphi1 = FIELD_GET(PLLDIG_RFDPHI1_MASK, val);
++
++	/*
++	 * If RFDPHI1 has a value of 1 the VCO frequency is also divided by
++	 * one.
++	 */
++	if (!rfdphi1)
++		rfdphi1 = 1;
++
++	return DIV_ROUND_UP(data->vco_freq, rfdphi1);
++}
++
++static unsigned long plldig_calc_target_div(unsigned long vco_freq,
++					    unsigned long target_rate)
++{
++	unsigned long div;
++
++	div = DIV_ROUND_CLOSEST(vco_freq, target_rate);
++	div = max(1UL, div);
++	div = min(div, MAX_RFDPHI1);
++
++	return div;
++}
++
++static int plldig_determine_rate(struct clk_hw *hw,
++				 struct clk_rate_request *req)
++{
++	struct clk_plldig *data = to_clk_plldig(hw);
++	unsigned int div;
++
++	if (req->rate < PHI1_MIN_FREQ)
++		req->rate = PHI1_MIN_FREQ;
++	if (req->rate > PHI1_MAX_FREQ)
++		req->rate = PHI1_MAX_FREQ;
++
++	div = plldig_calc_target_div(data->vco_freq, req->rate);
++	req->rate = DIV_ROUND_UP(data->vco_freq, div);
++
++	return 0;
++}
++
++static int plldig_set_rate(struct clk_hw *hw, unsigned long rate,
++		unsigned long parent_rate)
++{
++	struct clk_plldig *data = to_clk_plldig(hw);
++	unsigned int val, cond;
++	unsigned int rfdphi1;
++
++	if (rate < PHI1_MIN_FREQ)
++		rate = PHI1_MIN_FREQ;
++	if (rate > PHI1_MAX_FREQ)
++		rate = PHI1_MAX_FREQ;
++
++	rfdphi1 = plldig_calc_target_div(data->vco_freq, rate);
++
++	/* update the divider value */
++	val = readl(data->regs + PLLDIG_REG_PLLDV);
++	val &= ~PLLDIG_RFDPHI1_MASK;
++	val |= FIELD_PREP(PLLDIG_RFDPHI1_MASK, rfdphi1);
++	writel(val, data->regs + PLLDIG_REG_PLLDV);
++
++	/* delay 200us make sure that old lock state is cleared */
++	udelay(200);
++
++	/* Wait until PLL is locked or timeout (maximum 1000 usecs) */
++	return readl_poll_timeout_atomic(data->regs + PLLDIG_REG_PLLSR, cond,
++					 cond & PLLDIG_LOCK_MASK, 0,
++					 USEC_PER_MSEC);
++}
++
++static const struct clk_ops plldig_clk_ops = {
++	.enable = plldig_enable,
++	.disable = plldig_disable,
++	.is_enabled = plldig_is_enabled,
++	.recalc_rate = plldig_recalc_rate,
++	.determine_rate = plldig_determine_rate,
++	.set_rate = plldig_set_rate,
++};
++
++static int plldig_init(struct clk_hw *hw)
++{
++	struct clk_plldig *data = to_clk_plldig(hw);
++	struct clk_hw *parent = clk_hw_get_parent(hw);
++	unsigned long parent_rate = clk_hw_get_rate(parent);
++	unsigned long val;
++	unsigned long long lltmp;
++	unsigned int mfd, fracdiv = 0;
++
++	if (!parent)
++		return -EINVAL;
++
++	if (data->vco_freq) {
++		mfd = data->vco_freq / parent_rate;
++		lltmp = data->vco_freq % parent_rate;
++		lltmp *= MFDEN;
++		do_div(lltmp, parent_rate);
++		fracdiv = lltmp;
++	} else {
++		mfd = PLLDIG_DEFAULT_MFD;
++		data->vco_freq = parent_rate * mfd;
++	}
++
++	val = FIELD_PREP(PLLDIG_MFD_MASK, mfd);
++	writel(val, data->regs + PLLDIG_REG_PLLDV);
++
++	if (fracdiv) {
++		val = FIELD_PREP(PLLDIG_FRAC_MASK, fracdiv);
++		/* Enable fractional divider */
++		val |= PLLDIG_FDEN;
++		/* Disable dither */
++		val |= FIELD_PREP(PLLDIG_DTH_MASK, PLLDIG_DTH_DISABLE);
++		writel(val, data->regs + PLLDIG_REG_PLLFD);
++	}
++
++	return 0;
++}
++
++static int plldig_clk_probe(struct platform_device *pdev)
++{
++	struct clk_plldig *data;
++	struct resource *mem;
++	struct device *dev = &pdev->dev;
++	int ret;
++
++	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
++	if (!data)
++		return -ENOMEM;
++
++	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	data->regs = devm_ioremap_resource(dev, mem);
++	if (IS_ERR(data->regs))
++		return PTR_ERR(data->regs);
++
++	data->hw.init = CLK_HW_INIT_PARENTS_DATA("dpclk",
++						 parent_data,
++						 &plldig_clk_ops,
++						 0);
++
++	ret = devm_clk_hw_register(dev, &data->hw);
++	if (ret) {
++		dev_err(dev, "failed to register %s clock\n",
++						dev->of_node->name);
++		return ret;
++	}
++
++	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
++					  &data->hw);
++	if (ret) {
++		dev_err(dev, "unable to add clk provider\n");
++		return ret;
++	}
++
++	/*
++	 * The frequency of the VCO cannot be changed during runtime.
++	 * Therefore, let the user specify a desired frequency.
++	 */
++	if (!of_property_read_u32(dev->of_node, "vco-frequency",
++				  &data->vco_freq)) {
++		if (data->vco_freq < PLLDIG_MIN_VCO_FREQ ||
++		    data->vco_freq > PLLDIG_MAX_VCO_FREQ)
++			return -EINVAL;
++	}
++
++	return plldig_init(&data->hw);
++}
++
++static const struct of_device_id plldig_clk_id[] = {
++	{ .compatible = "fsl,ls1028a-plldig"},
++	{ }
++};
++MODULE_DEVICE_TABLE(of, plldig_clk_id);
++
++static struct platform_driver plldig_clk_driver = {
++	.driver = {
++		.name = "plldig-clock",
++		.of_match_table = plldig_clk_id,
++	},
++	.probe = plldig_clk_probe,
++};
++module_platform_driver(plldig_clk_driver);
++
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Wen He <wen.he_1@nxp.com>");
++MODULE_DESCRIPTION("LS1028A Display output interface pixel clock driver");