ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/target/linux/realtek/files-5.4/drivers/gpio/gpio-rtl8231.c b/target/linux/realtek/files-5.4/drivers/gpio/gpio-rtl8231.c
new file mode 100644
index 0000000..031f60f
--- /dev/null
+++ b/target/linux/realtek/files-5.4/drivers/gpio/gpio-rtl8231.c
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <asm/mach-rtl838x/mach-rtl83xx.h>
+
+/* RTL8231 registers for LED control */
+#define RTL8231_LED_FUNC0 0x0000
+#define RTL8231_GPIO_PIN_SEL(gpio) ((0x0002) + ((gpio) >> 4))
+#define RTL8231_GPIO_DIR(gpio) ((0x0005) + ((gpio) >> 4))
+#define RTL8231_GPIO_DATA(gpio) ((0x001C) + ((gpio) >> 4))
+
+#define USEC_TIMEOUT 5000
+
+struct rtl8231_gpios {
+ struct gpio_chip gc;
+ struct device *dev;
+ u32 id;
+ int smi_bus_id;
+ u16 reg_shadow[0x20];
+ u32 reg_cached;
+ int ext_gpio_indrt_access;
+};
+
+extern struct mutex smi_lock;
+extern struct rtl83xx_soc_info soc_info;
+
+static u32 rtl8231_read(struct rtl8231_gpios *gpios, u32 reg)
+{
+ u32 t = 0, n = 0;
+ u8 bus_id = gpios->smi_bus_id;
+
+ reg &= 0x1f;
+ bus_id &= 0x1f;
+
+ /* Calculate read register address */
+ t = (bus_id << 2) | (reg << 7);
+
+ /* Set execution bit: cleared when operation completed */
+ t |= 1;
+
+ // Start execution
+ sw_w32(t, gpios->ext_gpio_indrt_access);
+ do {
+ udelay(1);
+ t = sw_r32(gpios->ext_gpio_indrt_access);
+ n++;
+ } while ((t & 1) && (n < USEC_TIMEOUT));
+
+ if (n >= USEC_TIMEOUT)
+ return 0x80000000;
+
+ pr_debug("%s: %x, %x, %x\n", __func__, bus_id, reg, (t & 0xffff0000) >> 16);
+
+ return (t & 0xffff0000) >> 16;
+}
+
+static int rtl8231_write(struct rtl8231_gpios *gpios, u32 reg, u32 data)
+{
+ u32 t = 0, n = 0;
+ u8 bus_id = gpios->smi_bus_id;
+
+ pr_debug("%s: %x, %x, %x\n", __func__, bus_id, reg, data);
+ reg &= 0x1f;
+ bus_id &= 0x1f;
+
+ t = (bus_id << 2) | (reg << 7) | (data << 16);
+ /* Set write bit */
+ t |= 2;
+
+ /* Set execution bit: cleared when operation completed */
+ t |= 1;
+
+ // Start execution
+ sw_w32(t, gpios->ext_gpio_indrt_access);
+ do {
+ udelay(1);
+ t = sw_r32(gpios->ext_gpio_indrt_access);
+ } while ((t & 1) && (n < USEC_TIMEOUT));
+
+ if (n >= USEC_TIMEOUT)
+ return -1;
+
+ return 0;
+}
+
+static u32 rtl8231_read_cached(struct rtl8231_gpios *gpios, u32 reg)
+{
+ if (reg > 0x1f)
+ return 0;
+
+ if (gpios->reg_cached & (1 << reg))
+ return gpios->reg_shadow[reg];
+
+ return rtl8231_read(gpios, reg);
+}
+
+/* Set Direction of the RTL8231 pin:
+ * dir 1: input
+ * dir 0: output
+ */
+static int rtl8231_pin_dir(struct rtl8231_gpios *gpios, u32 gpio, u32 dir)
+{
+ u32 v;
+ int pin_sel_addr = RTL8231_GPIO_PIN_SEL(gpio);
+ int pin_dir_addr = RTL8231_GPIO_DIR(gpio);
+ int pin = gpio % 16;
+ int dpin = pin;
+
+ if (gpio > 31) {
+ pr_debug("WARNING: HIGH pin\n");
+ dpin = pin << 5;
+ pin_dir_addr = pin_sel_addr;
+ }
+
+ v = rtl8231_read_cached(gpios, pin_dir_addr);
+ if (v & 0x80000000) {
+ pr_err("Error reading RTL8231\n");
+ return -1;
+ }
+
+ v = (v & ~(1 << dpin)) | (dir << dpin);
+ rtl8231_write(gpios, pin_dir_addr, v);
+ gpios->reg_shadow[pin_dir_addr] = v;
+ gpios->reg_cached |= 1 << pin_dir_addr;
+ return 0;
+}
+
+static int rtl8231_pin_dir_get(struct rtl8231_gpios *gpios, u32 gpio, u32 *dir)
+{
+ /* dir 1: input
+ * dir 0: output
+ */
+
+ u32 v;
+ int pin_dir_addr = RTL8231_GPIO_DIR(gpio);
+ int pin = gpio % 16;
+
+ if (gpio > 31) {
+ pin_dir_addr = RTL8231_GPIO_PIN_SEL(gpio);
+ pin = pin << 5;
+ }
+
+ v = rtl8231_read(gpios, pin_dir_addr);
+ if (v & (1 << pin))
+ *dir = 1;
+ else
+ *dir = 0;
+ return 0;
+}
+
+static int rtl8231_pin_set(struct rtl8231_gpios *gpios, u32 gpio, u32 data)
+{
+ u32 v = rtl8231_read(gpios, RTL8231_GPIO_DATA(gpio));
+
+ pr_debug("%s: %d to %d\n", __func__, gpio, data);
+ if (v & 0x80000000) {
+ pr_err("Error reading RTL8231\n");
+ return -1;
+ }
+ v = (v & ~(1 << (gpio % 16))) | (data << (gpio % 16));
+ rtl8231_write(gpios, RTL8231_GPIO_DATA(gpio), v);
+ gpios->reg_shadow[RTL8231_GPIO_DATA(gpio)] = v;
+ gpios->reg_cached |= 1 << RTL8231_GPIO_DATA(gpio);
+ return 0;
+}
+
+static int rtl8231_pin_get(struct rtl8231_gpios *gpios, u32 gpio, u16 *state)
+{
+ u32 v = rtl8231_read(gpios, RTL8231_GPIO_DATA(gpio));
+
+ if (v & 0x80000000) {
+ pr_err("Error reading RTL8231\n");
+ return -1;
+ }
+
+ *state = v & 0xffff;
+ return 0;
+}
+
+static int rtl8231_direction_input(struct gpio_chip *gc, unsigned int offset)
+{
+ int err;
+ struct rtl8231_gpios *gpios = gpiochip_get_data(gc);
+
+ pr_debug("%s: %d\n", __func__, offset);
+ mutex_lock(&smi_lock);
+ err = rtl8231_pin_dir(gpios, offset, 1);
+ mutex_unlock(&smi_lock);
+ return err;
+}
+
+static int rtl8231_direction_output(struct gpio_chip *gc, unsigned int offset, int value)
+{
+ int err;
+ struct rtl8231_gpios *gpios = gpiochip_get_data(gc);
+
+ pr_debug("%s: %d\n", __func__, offset);
+ mutex_lock(&smi_lock);
+ err = rtl8231_pin_dir(gpios, offset, 0);
+ mutex_unlock(&smi_lock);
+ if (!err)
+ err = rtl8231_pin_set(gpios, offset, value);
+ return err;
+}
+
+static int rtl8231_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+ u32 v = 0;
+ struct rtl8231_gpios *gpios = gpiochip_get_data(gc);
+
+ pr_debug("%s: %d\n", __func__, offset);
+ mutex_lock(&smi_lock);
+ rtl8231_pin_dir_get(gpios, offset, &v);
+ mutex_unlock(&smi_lock);
+ return v;
+}
+
+static int rtl8231_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+ u16 state = 0;
+ struct rtl8231_gpios *gpios = gpiochip_get_data(gc);
+
+ mutex_lock(&smi_lock);
+ rtl8231_pin_get(gpios, offset, &state);
+ mutex_unlock(&smi_lock);
+ if (state & (1 << (offset % 16)))
+ return 1;
+ return 0;
+}
+
+void rtl8231_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
+{
+ struct rtl8231_gpios *gpios = gpiochip_get_data(gc);
+
+ rtl8231_pin_set(gpios, offset, value);
+}
+
+int rtl8231_init(struct rtl8231_gpios *gpios)
+{
+ pr_info("%s called, MDIO bus ID: %d\n", __func__, gpios->smi_bus_id);
+
+ gpios->reg_cached = 0;
+
+ if (soc_info.family == RTL8390_FAMILY_ID) {
+ // RTL8390: Enable external gpio in global led control register
+ sw_w32_mask(0x7 << 18, 0x4 << 18, RTL839X_LED_GLB_CTRL);
+ } else if (soc_info.family == RTL8380_FAMILY_ID) {
+ // RTL8380: Enable RTL8231 indirect access mode
+ sw_w32_mask(0, 1, RTL838X_EXTRA_GPIO_CTRL);
+ sw_w32_mask(3, 1, RTL838X_DMY_REG5);
+ }
+
+ /*Select GPIO functionality for pins 0-15, 16-31 and 32-37 */
+ rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(0), 0xffff);
+ rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(16), 0xffff);
+
+ return 0;
+}
+
+static const struct of_device_id rtl8231_gpio_of_match[] = {
+ { .compatible = "realtek,rtl8231-gpio" },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, rtl8231_gpio_of_match);
+
+static int rtl8231_gpio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct rtl8231_gpios *gpios;
+ int err;
+ u32 indirect_bus_id;
+
+ pr_info("Probing RTL8231 GPIOs\n");
+
+ if (!np) {
+ dev_err(&pdev->dev, "No DT found\n");
+ return -EINVAL;
+ }
+
+ gpios = devm_kzalloc(dev, sizeof(*gpios), GFP_KERNEL);
+ if (!gpios)
+ return -ENOMEM;
+
+ gpios->id = soc_info.id;
+ if (soc_info.family == RTL8380_FAMILY_ID) {
+ gpios->ext_gpio_indrt_access = RTL838X_EXT_GPIO_INDRT_ACCESS;
+ }
+
+ if (soc_info.family == RTL8390_FAMILY_ID) {
+ gpios->ext_gpio_indrt_access = RTL839X_EXT_GPIO_INDRT_ACCESS;
+ }
+
+ /*
+ * We use a default MDIO bus ID for the 8231 of 0, which can be overriden
+ * by the indirect-access-bus-id property in the dts.
+ */
+ gpios->smi_bus_id = 0;
+ of_property_read_u32(np, "indirect-access-bus-id", &indirect_bus_id);
+ gpios->smi_bus_id = indirect_bus_id;
+
+ rtl8231_init(gpios);
+
+ gpios->dev = dev;
+ gpios->gc.base = 160;
+ gpios->gc.ngpio = 36;
+ gpios->gc.label = "rtl8231";
+ gpios->gc.parent = dev;
+ gpios->gc.owner = THIS_MODULE;
+ gpios->gc.can_sleep = true;
+
+ gpios->gc.direction_input = rtl8231_direction_input;
+ gpios->gc.direction_output = rtl8231_direction_output;
+ gpios->gc.set = rtl8231_gpio_set;
+ gpios->gc.get = rtl8231_gpio_get;
+ gpios->gc.get_direction = rtl8231_get_direction;
+
+ err = devm_gpiochip_add_data(dev, &gpios->gc, gpios);
+ return err;
+}
+
+static struct platform_driver rtl8231_gpio_driver = {
+ .driver = {
+ .name = "rtl8231-gpio",
+ .of_match_table = rtl8231_gpio_of_match,
+ },
+ .probe = rtl8231_gpio_probe,
+};
+
+module_platform_driver(rtl8231_gpio_driver);
+
+MODULE_DESCRIPTION("Realtek RTL8231 GPIO expansion chip support");
+MODULE_LICENSE("GPL v2");