| /* |
| * Copyright 2018 ASR Microelectronics (Shanghai) Co., Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| &pmic5 { |
| compatible = "asr,pm802"; |
| reg = <0x00>; |
| /* interrupts = <4>; |
| interrupt-parent = <&intc>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| */ |
| asr,pm802-irq-write-clear; |
| /* set scs-int-active-high depending on board connection */ |
| /* scs-int-active-high; */ |
| |
| asr,pm802-power-page-addr = <0x1>; |
| asr,pm802-gpadc-page-addr = <0x2>; |
| |
| regulators { |
| compatible = "asr,pm802-regulator"; |
| |
| BUCK1 { |
| regulator-compatible = "PM802-BUCK1"; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <3950000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| BUCK2 { |
| regulator-compatible = "PM802-BUCK2"; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <3950000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| BUCK3 { |
| regulator-compatible = "PM802-BUCK3"; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <3950000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| BUCK4 { |
| regulator-compatible = "PM802-BUCK4"; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <3950000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| BUCK5 { |
| regulator-compatible = "PM802-BUCK5"; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <3950000>; |
| regulator-always-on; |
| }; |
| LDO1 { |
| regulator-compatible = "PM802-LDO1"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| LDO2 { |
| regulator-compatible = "PM802-LDO2"; |
| regulator-min-microvolt = <1700000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| /* LDO3 { |
| regulator-compatible = "PM802-LDO3"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| };*/ |
| pm802ldo4: LDO4 { |
| regulator-compatible = "PM802-LDO4"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| LDO5 { |
| regulator-compatible = "PM802-LDO5"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| pm802ldo6: LDO6 { |
| regulator-compatible = "PM802-LDO6"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| }; |
| dvc { |
| status = "okay"; |
| compatible = "marvell,88pm8xx-dvc"; |
| /* pm800 dvc affect buck1/4, affected 32bit = (1 << 3) | (1 << 0)*/ |
| dvc-affected-buckbits = <1>; |
| dvc-gpio1 = <13>; |
| dvc-gpio2 = <127>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&dvc_pmx_func>; |
| }; |
| usb802: usb { |
| compatible = "marvell,88pm80x-usb"; |
| vbus_gpio = <0xff>; /* set_vbus */ |
| /* id-gpadc = <0xff>;*//* usb-id */ |
| vchg-from-exton = <1>; |
| }; |
| wd { |
| compatible = "marvell,88pm80x-wdt"; |
| }; |
| }; |