| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * GC032A CMOS Image Sensor driver |
| * |
| * Copyright (C) 2023 ASR Mirco Co., Ltd. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/i2c.h> |
| #include <linux/regmap.h> |
| #include <linux/kernel.h> |
| #include <linux/media.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_graph.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| #include <linux/uaccess.h> |
| #include <linux/videodev2.h> |
| #include <linux/version.h> |
| #include <media/media-entity.h> |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-event.h> |
| #include <media/v4l2-fwnode.h> |
| #include <media/v4l2-image-sizes.h> |
| #include <media/v4l2-mediabus.h> |
| #include <media/v4l2-subdev.h> |
| |
| #define DRIVER_VERSION KERNEL_VERSION(0, 0x01, 0x1) |
| #define DRIVER_NAME "gc032a" |
| #define GC032A_PIXEL_RATE (96 * 1000 * 1000) |
| |
| /* |
| * GC032A register definitions |
| */ |
| #define REG_SOFTWARE_STANDBY 0xf3 |
| |
| #define REG_SC_CHIP_ID_H 0xf0 |
| #define REG_SC_CHIP_ID_L 0xf1 |
| |
| #define REG_NULL 0xFFFF /* Array end token */ |
| |
| #define SENSOR_ID(_msb, _lsb) ((_msb) << 8 | (_lsb)) |
| #define GC032A_ID 0x232a |
| |
| /* gc isp nead extra 6 lines with raw sensor */ |
| #define EXTRA_LINES_RAW_SENSOR 6 |
| |
| struct sensor_register { |
| u16 addr; |
| u8 value; |
| }; |
| |
| enum cam_interface { |
| INF_SPI1LAN = 0x0, |
| INF_SPI2LAN, |
| INF_SPI4LAN, |
| INF_MIPI1LAN, |
| INF_MIPI2LAN, |
| INF_MIPI4LAN, |
| INF_DVP, |
| INF_MAX, |
| }; |
| |
| struct spi_param { |
| u8 spi_sdr; //0x0:no sdr 0x1:sdr |
| u8 spi_crc; //0x0:no crc 0x1:crc |
| u8 spi_manual_enable; //0x0:not enable 0x1:enable |
| u8 spi_manual_mode; |
| u8 spi_manual_height_enable; //0x0:not enable 0x1:enable |
| u8 spi_manual_width_enable; //0x0:not enable 0x1:enable |
| u16 spi_manual_height; |
| u16 spi_manual_width; |
| u8 spi_ignore_line_id; |
| }; |
| |
| struct gc032a_framesize { |
| u16 width; |
| u16 height; |
| u16 max_exp_lines; |
| struct v4l2_fract max_fps; |
| const struct sensor_register *regs; |
| }; |
| |
| struct gc032a_spi_config { |
| enum cam_interface inf; |
| union { |
| struct spi_param inf_spi; |
| } u; |
| }; |
| |
| struct gc032a_pll_ctrl { |
| u8 ctrl1; |
| u8 ctrl2; |
| u8 ctrl3; |
| }; |
| |
| struct gc032a_pixfmt { |
| u32 code; |
| /* Output format Register Value (REG_FORMAT_CTRL00) */ |
| struct sensor_register *format_ctrl_regs; |
| }; |
| |
| struct pll_ctrl_reg { |
| unsigned int div; |
| unsigned char reg; |
| }; |
| |
| static const char * const gc032a_supply_names[] = { |
| "avdd", /* Analog power */ |
| "iovdd", /* Digital I/O power */ |
| }; |
| |
| #define GC032A_NUM_SUPPLIES ARRAY_SIZE(gc032a_supply_names) |
| |
| struct gc032a { |
| struct v4l2_subdev sd; |
| struct media_pad pad; |
| struct v4l2_mbus_framefmt format; |
| struct gpio_desc *pwdn_gpio; |
| struct gpio_desc *power_gpio; |
| struct regulator_bulk_data supplies[GC032A_NUM_SUPPLIES]; |
| struct mutex lock; |
| struct i2c_client *client; |
| struct v4l2_ctrl_handler ctrls; |
| struct v4l2_ctrl *link_frequency; |
| const struct gc032a_framesize *frame_size; |
| int streaming; |
| bool power_on; |
| }; |
| |
| #define NUM_BR_LEVELS 9 |
| |
| #define GC032A_SET_QUICK_STREAM \ |
| _IOW('V', BASE_VIDIOC_PRIVATE + 0, __u32) |
| |
| extern void asr_camera_mclk_ctrl(int on); |
| /* yuv422 640 * 480 spi 2 lan */ |
| static const struct sensor_register gc032a_init_yuv422_640x480_spi2lan_crc_sdr[] = |
| { |
| {0xf3, 0x83}, /*System*/ |
| {0xf5, 0x0c}, |
| {0xf7, 0x13}, //{0xf7, 0x11}, |
| {0xf8, 0x0f}, //{0xf8, 0x07}, pclk 24M |
| {0xf9, 0x4e}, |
| {0xfa, 0x31}, //{0xfa, 0x10}, |
| {0xfc, 0x02}, |
| {0xfe, 0x02}, |
| {0x81, 0x03}, |
| {0xfe, 0x00}, /*Analog&Cisctl*/ |
| {0x03, 0x01}, |
| {0x04, 0xc2}, |
| {0x05, 0x01}, |
| {0x06, 0xa3}, |
| {0x07, 0x00}, |
| {0x08, 0x08}, |
| {0x0a, 0x04}, |
| {0x0c, 0x04}, |
| {0x0d, 0x01}, |
| {0x0e, 0xe8}, |
| {0x0f, 0x02}, |
| {0x10, 0x88}, |
| {0x17, 0x54}, |
| {0x19, 0x04}, |
| {0x1a, 0x0a}, |
| {0x1f, 0x40}, |
| {0x20, 0x30}, |
| {0x2e, 0x80}, |
| {0x2f, 0x2b}, |
| {0x30, 0x1a}, |
| {0xfe, 0x02}, |
| {0x03, 0x02}, //[4:0]post_tx_width |
| {0x06, 0x60}, //[5:4]stsbp_mode |
| {0x05, 0xd7}, //drv |
| {0x12, 0x89}, //[7:6]init_ramp_mode |
| {0xfe, 0x03}, /*SPI*/ |
| {0x51, 0x00}, //0x01 can not stream on |
| {0x52, 0xda}, |
| {0x53, 0xa4}, //no crc 0x24 crc 0xa4 |
| {0x54, 0x20}, |
| {0x55, 0x00}, |
| {0x59, 0x10}, // {0x59, 0x30}, |
| {0x5a, 0x00}, //0x01 type |
| {0x5b, 0x80}, |
| {0x5c, 0x02}, |
| {0x5d, 0xe0}, // e0 |
| {0x5e, 0x01}, |
| {0x64, 0x06}, |
| {0xfe, 0x00}, /*blk*/ |
| {0x18, 0x02}, |
| {0xfe, 0x02}, |
| {0x40, 0x22}, |
| {0x45, 0x00}, |
| {0x46, 0x00}, |
| {0x49, 0x20}, |
| {0x4b, 0x3c}, |
| {0x50, 0x20}, |
| {0x42, 0x10}, |
| {0xfe, 0x01}, /*isp*/ |
| {0x0a, 0xc5}, |
| {0x45, 0x00}, //[6]darksun_en |
| {0xfe, 0x00}, |
| {0x40, 0xff}, |
| {0x41, 0x25}, |
| {0x42, 0xcf}, |
| {0x43, 0x10}, |
| {0x44, 0x83}, |
| {0x46, 0x26}, |
| {0x49, 0x03}, |
| {0x4f, 0x01}, //[0]AEC_en |
| {0xde, 0x84}, |
| {0xfe, 0x02}, |
| {0x22, 0xf6}, //CISCTL_SUN_TH_R |
| {0xfe, 0x01}, /*Shading*/ |
| {0xc1, 0x3c}, |
| {0xc2, 0x50}, |
| {0xc3, 0x00}, |
| {0xc4, 0x32}, |
| {0xc5, 0x24}, |
| {0xc6, 0x16}, |
| {0xc7, 0x08}, |
| {0xc8, 0x08}, |
| {0xc9, 0x00}, |
| {0xca, 0x20}, |
| {0xdc, 0x8a}, |
| {0xdd, 0xa0}, |
| {0xde, 0xa6}, |
| {0xdf, 0x75}, |
| {0xfe, 0x01}, /*AWB*/ |
| {0x7c, 0x09}, |
| {0x65, 0x06}, |
| {0x7c, 0x08}, |
| {0x56, 0xf4}, |
| {0x66, 0x0f}, |
| {0x67, 0x84}, |
| {0x6b, 0x80}, |
| {0x6d, 0x12}, |
| {0x6e, 0xb0}, |
| {0x86, 0x00}, |
| {0x87, 0x00}, |
| {0x88, 0x00}, |
| {0x89, 0x00}, |
| {0x8a, 0x00}, |
| {0x8b, 0x00}, |
| {0x8c, 0x00}, |
| {0x8d, 0x00}, |
| {0x8e, 0x00}, |
| {0x8f, 0x00}, |
| {0x90, 0xef}, |
| {0x91, 0xe1}, |
| {0x92, 0x0c}, |
| {0x93, 0xef}, |
| {0x94, 0x65}, |
| {0x95, 0x1f}, |
| {0x96, 0x0c}, |
| {0x97, 0x2d}, |
| {0x98, 0x20}, |
| {0x99, 0xaa}, |
| {0x9a, 0x3f}, |
| {0x9b, 0x2c}, |
| {0x9c, 0x5f}, |
| {0x9d, 0x3e}, |
| {0x9e, 0xaa}, |
| {0x9f, 0x67}, |
| {0xa0, 0x60}, |
| {0xa1, 0x00}, |
| {0xa2, 0x00}, |
| {0xa3, 0x0a}, |
| {0xa4, 0xb6}, |
| {0xa5, 0xac}, |
| {0xa6, 0xc1}, |
| {0xa7, 0xac}, |
| {0xa8, 0x55}, |
| {0xa9, 0xc3}, |
| {0xaa, 0xa4}, |
| {0xab, 0xba}, |
| {0xac, 0xa8}, |
| {0xad, 0x55}, |
| {0xae, 0xc8}, |
| {0xaf, 0xb9}, |
| {0xb0, 0xd4}, |
| {0xb1, 0xc3}, |
| {0xb2, 0x55}, |
| {0xb3, 0xd8}, |
| {0xb4, 0xce}, |
| {0xb5, 0x00}, |
| {0xb6, 0x00}, |
| {0xb7, 0x05}, |
| {0xb8, 0xd6}, |
| {0xb9, 0x8c}, |
| {0xfe, 0x01}, /*CC*/ |
| {0xd0, 0x40}, //3a |
| {0xd1, 0xf8}, |
| {0xd2, 0x00}, |
| {0xd3, 0xfa}, |
| {0xd4, 0x45}, |
| {0xd5, 0x02}, |
| {0xd6, 0x30}, |
| {0xd7, 0xfa}, |
| {0xd8, 0x08}, |
| {0xd9, 0x08}, |
| {0xda, 0x58}, |
| {0xdb, 0x02}, |
| {0xfe, 0x00}, |
| {0xfe, 0x00}, /*Gamma*/ |
| {0xba, 0x00}, |
| {0xbb, 0x04}, |
| {0xbc, 0x0a}, |
| {0xbd, 0x0e}, |
| {0xbe, 0x22}, |
| {0xbf, 0x30}, |
| {0xc0, 0x3d}, |
| {0xc1, 0x4a}, |
| {0xc2, 0x5d}, |
| {0xc3, 0x6b}, |
| {0xc4, 0x7a}, |
| {0xc5, 0x85}, |
| {0xc6, 0x90}, |
| {0xc7, 0xa5}, |
| {0xc8, 0xb5}, |
| {0xc9, 0xc2}, |
| {0xca, 0xcc}, |
| {0xcb, 0xd5}, |
| {0xcc, 0xde}, |
| {0xcd, 0xea}, |
| {0xce, 0xf5}, |
| {0xcf, 0xff}, |
| {0xfe, 0x00}, /*Auto Gamma*/ |
| {0x5a, 0x08}, |
| {0x5b, 0x0f}, |
| {0x5c, 0x15}, |
| {0x5d, 0x1c}, |
| {0x5e, 0x28}, |
| {0x5f, 0x36}, |
| {0x60, 0x45}, |
| {0x61, 0x51}, |
| {0x62, 0x6a}, |
| {0x63, 0x7d}, |
| {0x64, 0x8d}, |
| {0x65, 0x98}, |
| {0x66, 0xa2}, |
| {0x67, 0xb5}, |
| {0x68, 0xc3}, |
| {0x69, 0xcd}, |
| {0x6a, 0xd4}, |
| {0x6b, 0xdc}, |
| {0x6c, 0xe3}, |
| {0x6d, 0xf0}, |
| {0x6e, 0xf9}, |
| {0x6f, 0xff}, |
| {0xfe, 0x00}, /*Gain*/ |
| {0x70, 0x50}, |
| {0xfe, 0x00}, /*AEC*/ |
| {0x4f, 0x01}, |
| {0xfe, 0x01}, |
| {0x44, 0x04}, |
| {0x1f, 0x30}, |
| {0x20, 0x40}, |
| {0x26, 0x4e}, |
| {0x27, 0x01}, |
| {0x28, 0xd4}, |
| {0x29, 0x03}, |
| {0x2a, 0x0c}, |
| {0x2b, 0x03}, |
| {0x2c, 0xe9}, |
| {0x2d, 0x07}, |
| {0x2e, 0xd2}, |
| {0x2f, 0x0b}, |
| {0x30, 0x6e}, |
| {0x31, 0x0e}, |
| {0x32, 0x70}, |
| {0x33, 0x12}, |
| {0x34, 0x0c}, |
| {0x3c, 0x10}, //[5:4] Max level setting |
| {0x3e, 0x20}, |
| {0x3f, 0x2d}, |
| {0x40, 0x40}, |
| {0x41, 0x5b}, |
| {0x42, 0x82}, |
| {0x43, 0xb7}, |
| {0x04, 0x0a}, |
| {0x02, 0x79}, |
| {0x03, 0xc0}, |
| {0xcc, 0x08}, /*measure window*/ |
| {0xcd, 0x08}, |
| {0xce, 0xa4}, |
| {0xcf, 0xec}, |
| {0xfe, 0x00}, /*DNDD*/ |
| {0x81, 0xb8}, //f8 |
| {0x82, 0x12}, |
| {0x83, 0x0a}, |
| {0x84, 0x01}, |
| {0x86, 0x50}, |
| {0x87, 0x18}, |
| {0x88, 0x10}, |
| {0x89, 0x70}, |
| {0x8a, 0x20}, |
| {0x8b, 0x10}, |
| {0x8c, 0x08}, |
| {0x8d, 0x0a}, |
| {0xfe, 0x00}, /*Intpee*/ |
| {0x8f, 0xaa}, |
| {0x90, 0x9c}, |
| {0x91, 0x52}, |
| {0x92, 0x03}, |
| {0x93, 0x03}, |
| {0x94, 0x08}, |
| {0x95, 0x44}, |
| {0x97, 0x00}, |
| {0x98, 0x00}, |
| {0xfe, 0x00}, /*ASDE*/ |
| {0xa1, 0x30}, |
| {0xa2, 0x41}, |
| {0xa4, 0x30}, |
| {0xa5, 0x20}, |
| {0xaa, 0x30}, |
| {0xac, 0x32}, |
| {0xfe, 0x00}, /*YCP*/ |
| {0xd1, 0x3c}, |
| {0xd2, 0x3c}, |
| {0xd3, 0x38}, |
| {0xd6, 0xf4}, |
| {0xd7, 0x1d}, |
| {0xdd, 0x73}, |
| {0xde, 0x84}, |
| #if 0 |
| /* sensor crop */ |
| {0x50, 0x01}, |
| // 320x240 |
| {0x55, 0x00}, // height |
| {0x56, 0xf0}, |
| {0x57, 0x01}, // width |
| {0x58, 0x40}, |
| |
| {0xfe, 0x03}, |
| {0x5b, 0x40}, //spi width |
| {0x5c, 0x01}, |
| {0x5d, 0xf0}, // spi height |
| {0x5e, 0x00}, |
| {0xfe, 0x00}, |
| |
| /* sensor crop */ |
| {0x50, 0x01}, |
| // 480x480 |
| {0x55, 0x01}, // height |
| {0x56, 0xe0}, |
| {0x57, 0x01}, // width |
| {0x58, 0xe0}, |
| |
| {0xfe, 0x03}, |
| {0x5b, 0xe0}, //spi width |
| {0x5c, 0x01}, |
| {0x5d, 0xe0}, // spi height |
| {0x5e, 0x01}, |
| {0xfe, 0x00}, |
| #endif |
| //{0x4c, 0x08}, //for color bar |
| {REG_NULL, 0x00}, |
| }; |
| |
| static const struct gc032a_framesize gc032a_framesizes[] = { |
| { |
| .width = 640, |
| .height = 480, |
| .max_fps = { |
| .numerator = 10000, |
| .denominator = 200000, |
| }, |
| .regs = gc032a_init_yuv422_640x480_spi2lan_crc_sdr, |
| .max_exp_lines = 488, |
| }, |
| }; |
| |
| static const struct gc032a_spi_config gc032a_spi[] = { |
| { |
| .inf = INF_SPI2LAN, |
| .u = { |
| .inf_spi = { |
| .spi_sdr = 0, //0x0:sdr |
| .spi_crc = 1, //0x1:crc |
| .spi_manual_enable = 0, //0x0:not enable 0x1:enable |
| .spi_manual_mode = 0, |
| .spi_manual_height_enable = 0, //0x0:not enable 0x1:enable |
| .spi_manual_width_enable = 0, //0x0:not enable 0x1:enable |
| .spi_manual_height = 0, |
| .spi_manual_width = 0, |
| .spi_ignore_line_id = 1, |
| }, |
| }, |
| }, |
| }; |
| |
| static const struct gc032a_pixfmt gc032a_formats[] = { |
| { |
| .code = MEDIA_BUS_FMT_YVYU8_2X8, |
| }, |
| }; |
| |
| static inline struct gc032a *to_gc032a(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct gc032a, sd); |
| } |
| |
| /* sensor register write */ |
| static int gc032a_write(struct i2c_client *client, u8 reg, u8 val) |
| { |
| struct i2c_msg msg; |
| u8 buf[2]; |
| int ret; |
| |
| buf[0] = reg & 0xFF; |
| buf[1] = val; |
| |
| msg.addr = client->addr; |
| msg.flags = client->flags; |
| msg.buf = buf; |
| msg.len = sizeof(buf); |
| |
| ret = i2c_transfer(client->adapter, &msg, 1); |
| if (ret >= 0) |
| return 0; |
| |
| dev_err(&client->dev, |
| "gc032a write reg(0x%x val:0x%x) failed !\n", reg, val); |
| |
| return ret; |
| } |
| |
| /* sensor register read */ |
| static int gc032a_read(struct i2c_client *client, u8 reg, u8 *val) |
| { |
| struct i2c_msg msg[2]; |
| u8 buf[1]; |
| int ret; |
| |
| buf[0] = reg & 0xFF; |
| |
| msg[0].addr = client->addr; |
| msg[0].flags = client->flags; |
| msg[0].buf = buf; |
| msg[0].len = sizeof(buf); |
| |
| msg[1].addr = client->addr; |
| msg[1].flags = client->flags | I2C_M_RD; |
| msg[1].buf = buf; |
| msg[1].len = 1; |
| |
| ret = i2c_transfer(client->adapter, msg, 2); |
| if (ret >= 0) { |
| *val = buf[0]; |
| return 0; |
| } |
| |
| dev_err(&client->dev, |
| "gc032a read reg:0x%x failed !\n", reg); |
| return ret; |
| } |
| |
| static int gc032a_write_array(struct i2c_client *client, |
| const struct sensor_register *regs) |
| { |
| int i, ret = 0; |
| |
| i = 0; |
| while (regs[i].addr != REG_NULL) { |
| ret = gc032a_write(client, regs[i].addr, regs[i].value); |
| if (ret) { |
| dev_err(&client->dev, "%s failed !, i=%d\n", __func__,i); |
| break; |
| } |
| |
| i++; |
| } |
| |
| return ret; |
| } |
| |
| static void gc032a_get_default_format(struct v4l2_mbus_framefmt *format) |
| { |
| format->width = gc032a_framesizes[0].width; |
| format->height = gc032a_framesizes[0].height; |
| format->colorspace = V4L2_COLORSPACE_SRGB; //TODO |
| format->code = gc032a_formats[0].code; |
| format->field = V4L2_FIELD_NONE; |
| |
| format->reserved[0] = gc032a_spi[0].inf; |
| format->reserved[1] = gc032a_spi[0].u.inf_spi.spi_sdr; |
| format->reserved[2] = gc032a_spi[0].u.inf_spi.spi_crc; |
| format->reserved[3] = gc032a_spi[0].u.inf_spi.spi_manual_enable; |
| format->reserved[4] = gc032a_spi[0].u.inf_spi.spi_manual_mode; |
| format->reserved[5] = gc032a_spi[0].u.inf_spi.spi_manual_height_enable; |
| format->reserved[6] = gc032a_spi[0].u.inf_spi.spi_manual_width_enable; |
| format->reserved[7] = gc032a_spi[0].u.inf_spi.spi_manual_height; |
| format->reserved[8] = gc032a_spi[0].u.inf_spi.spi_manual_width; |
| format->reserved[9] = gc032a_spi[0].u.inf_spi.spi_ignore_line_id; |
| pr_debug("%s: %x %dx%d lane%d sdr%d crc%d line_id%d\n", __func__, |
| format->code, format->width, |
| format->height, format->reserved[0], |
| format->reserved[1], format->reserved[2], format->reserved[9]); |
| } |
| |
| static void gc032a_set_streaming(struct gc032a *gc032a, int on) |
| { |
| struct i2c_client *client = gc032a->client; |
| int ret; |
| |
| dev_dbg(&client->dev, "%s: on: %d\n", __func__, on); |
| |
| ret = gc032a_write(client, 0xfe, 0x03); //page select |
| if (ret) |
| dev_err(&client->dev, "gc032a write 0xfe, 0x03 failed ret = %d\n",ret ); |
| ret = gc032a_write(client, 0x51, on); |
| if (ret) |
| dev_err(&client->dev, "gc032a write 0x51, 0x%x failed ret = %d\n", on, ret); |
| } |
| |
| /* |
| * V4L2 subdev video and pad level operations |
| */ |
| static int gc032a_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| dev_dbg(&client->dev, "%s:\n", __func__); |
| |
| if (code->index >= ARRAY_SIZE(gc032a_formats)) |
| return -EINVAL; |
| |
| code->code = gc032a_formats[code->index].code; |
| |
| return 0; |
| } |
| |
| static int gc032a_enum_frame_sizes(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_frame_size_enum *fse) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| int i = ARRAY_SIZE(gc032a_formats); |
| |
| dev_dbg(&client->dev, "%s:\n", __func__); |
| |
| if (fse->index >= ARRAY_SIZE(gc032a_framesizes)) |
| return -EINVAL; |
| |
| while (--i) |
| if (fse->code == gc032a_formats[i].code) |
| break; |
| |
| fse->code = gc032a_formats[i].code; |
| |
| fse->min_width = gc032a_framesizes[fse->index].width; |
| fse->max_width = fse->min_width; |
| fse->max_height = gc032a_framesizes[fse->index].height; |
| fse->min_height = fse->max_height; |
| |
| return 0; |
| } |
| |
| static int gc032a_get_fmt(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct gc032a *gc032a = to_gc032a(sd); |
| |
| dev_dbg(&client->dev, "%s enter\n", __func__); |
| |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
| #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API |
| struct v4l2_mbus_framefmt *mf; |
| |
| mf = v4l2_subdev_get_try_format(sd, cfg, 0); |
| mutex_lock(&gc032a->lock); |
| fmt->format = *mf; |
| mutex_unlock(&gc032a->lock); |
| return 0; |
| #else |
| return -ENOTTY; |
| #endif |
| } |
| |
| mutex_lock(&gc032a->lock); |
| fmt->format = gc032a->format; |
| mutex_unlock(&gc032a->lock); |
| |
| dev_dbg(&client->dev, "%s: %x %dx%d lane%d sdr%d crc%d line_id%d\n", __func__, |
| gc032a->format.code, gc032a->format.width, |
| gc032a->format.height, gc032a->format.reserved[0], |
| gc032a->format.reserved[1], gc032a->format.reserved[2], gc032a->format.reserved[9]); |
| |
| return 0; |
| } |
| |
| static void __gc032a_try_frame_size(struct v4l2_mbus_framefmt *mf, |
| const struct gc032a_framesize **size) |
| { |
| const struct gc032a_framesize *fsize = &gc032a_framesizes[0]; |
| const struct gc032a_framesize *match = NULL; |
| int i = ARRAY_SIZE(gc032a_framesizes); |
| unsigned int min_err = UINT_MAX; |
| |
| while (i--) { |
| unsigned int err = abs(fsize->width - mf->width) |
| + abs(fsize->height - mf->height); |
| if (err < min_err && fsize->regs[0].addr) { |
| min_err = err; |
| match = fsize; |
| } |
| fsize++; |
| } |
| |
| if (!match) |
| match = &gc032a_framesizes[0]; |
| |
| mf->width = match->width; |
| mf->height = match->height; |
| |
| if (size) |
| *size = match; |
| } |
| |
| static int gc032a_set_fmt(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| int index = ARRAY_SIZE(gc032a_formats); |
| struct v4l2_mbus_framefmt *mf = &fmt->format; |
| const struct gc032a_framesize *size = NULL; |
| struct gc032a *gc032a = to_gc032a(sd); |
| int ret = 0; |
| |
| dev_dbg(&client->dev, "%s enter, code:0x%x\n", __func__, mf->code); |
| |
| __gc032a_try_frame_size(mf, &size); |
| |
| while (--index >= 0) |
| if (gc032a_formats[index].code == mf->code) |
| break; |
| |
| if (index < 0) |
| return -EINVAL; |
| |
| mf->colorspace = V4L2_COLORSPACE_SRGB; |
| mf->code = gc032a_formats[index].code; |
| mf->field = V4L2_FIELD_NONE; |
| |
| mutex_lock(&gc032a->lock); |
| |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
| #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API |
| mf = v4l2_subdev_get_try_format(sd, cfg, fmt->pad); |
| *mf = fmt->format; |
| #else |
| return -ENOTTY; |
| #endif |
| } else { |
| if (gc032a->streaming) { |
| mutex_unlock(&gc032a->lock); |
| return -EBUSY; |
| } |
| |
| gc032a->frame_size = size; |
| gc032a->format = fmt->format; |
| } |
| |
| mutex_unlock(&gc032a->lock); |
| return ret; |
| } |
| |
| static long gc032a_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) |
| { |
| struct gc032a *gc032a = to_gc032a(sd); |
| long ret = 0; |
| u32 stream = 0; |
| |
| switch (cmd) { |
| case GC032A_SET_QUICK_STREAM: |
| |
| stream = *((u32 *)arg); |
| |
| if (stream) |
| gc032a_set_streaming(gc032a, 1); |
| else |
| gc032a_set_streaming(gc032a, 0); |
| break; |
| default: |
| ret = -ENOIOCTLCMD; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_COMPAT |
| static long gc032a_compat_ioctl32(struct v4l2_subdev *sd, |
| unsigned int cmd, unsigned long arg) |
| { |
| void __user *up = compat_ptr(arg); |
| long ret; |
| u32 stream = 0; |
| |
| switch (cmd) { |
| case GC032A_SET_QUICK_STREAM: |
| ret = copy_from_user(&stream, up, sizeof(u32)); |
| if (!ret) |
| ret = gc032a_ioctl(sd, cmd, &stream); |
| break; |
| default: |
| ret = -ENOIOCTLCMD; |
| break; |
| } |
| |
| return ret; |
| } |
| #endif |
| |
| static int gc032a_s_stream(struct v4l2_subdev *sd, int on) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct gc032a *gc032a = to_gc032a(sd); |
| |
| dev_dbg(&client->dev, "%s: on: %d\n", __func__, on); |
| |
| mutex_lock(&gc032a->lock); |
| on = !!on; |
| if (gc032a->streaming == on) |
| goto unlock; |
| |
| if (!on) { |
| /* Stop Streaming Sequence */ |
| gc032a_set_streaming(gc032a, 0); |
| gc032a->streaming = on; |
| goto unlock; |
| } |
| |
| gc032a_set_streaming(gc032a, 1); |
| gc032a->streaming = on; |
| |
| unlock: |
| mutex_unlock(&gc032a->lock); |
| return 0; |
| } |
| |
| static int gc032a_set_test_pattern(struct gc032a *gc032a, int value) |
| { |
| return 0; |
| } |
| |
| static int gc032a_yuv_set_banding(struct gc032a *gc032a, int value) |
| { |
| struct i2c_client *client = gc032a->client; |
| int ret; |
| |
| dev_dbg(&client->dev, "%s: value: %d\n", __func__, value); |
| |
| switch (value) { |
| case V4L2_CID_POWER_LINE_FREQUENCY_AUTO: |
| gc032a_write(client, 0xfe, 0x00); |
| break; |
| case V4L2_CID_POWER_LINE_FREQUENCY_50HZ: |
| gc032a_write(client, 0xfe, 0x00); |
| break; |
| case V4L2_CID_POWER_LINE_FREQUENCY_60HZ: |
| gc032a_write(client, 0xfe, 0x00); |
| break; |
| default: |
| dev_err(&client->dev, "invalid banding mode %d", value); |
| ret = -EINVAL; |
| } |
| return ret; |
| } |
| |
| static int gc032a_yuv_set_brightness(struct gc032a *gc032a, int value) |
| { |
| struct i2c_client *client = gc032a->client; |
| static const u8 regs[NUM_BR_LEVELS + 1] = { |
| 0xfe, |
| 0x00, /* 1 */ |
| 0x00, /* 2 */ |
| 0x00, /* 3 */ |
| 0x00, /* 4 */ |
| 0x00, /* 5 */ |
| 0x00, /* 6 */ |
| 0x00, /* 7 */ |
| 0x00, /* 8 */ |
| 0x00, /* 9 */ |
| }; |
| int ret = 0; |
| |
| dev_dbg(&client->dev, "%s: value: %d\n", __func__, value); |
| |
| if (value > NUM_BR_LEVELS) |
| return -EINVAL; |
| |
| ret = gc032a_write(client, regs[0], regs[value]); |
| return ret; |
| } |
| |
| static int gc032a_set_exposure(struct gc032a *gc032a, int value) |
| { |
| struct i2c_client *client = gc032a->client; |
| int ret; |
| |
| dev_dbg(&client->dev, "%s: value: %d\n", __func__, value); |
| |
| ret = gc032a_write(client, 0xfe, 0x00); //page select |
| if (ret) |
| dev_err(&client->dev, "gc032a write 0xfe, 0x00 failed ret = %d\n",ret ); |
| |
| ret = gc032a_write(client, 0x04, value& 0xff); //exp_low |
| if (ret < 0) |
| dev_err(&client->dev, "%s: error!", __func__); |
| |
| ret = gc032a_write(client, 0x03, (value >> 8) & 0x0f); //exp_high |
| if (ret < 0) |
| dev_err(&client->dev, "%s: error!", __func__); |
| |
| return ret; |
| } |
| |
| static int gc032a_set_gain(struct gc032a *gc032a, int value) |
| { |
| struct i2c_client *client = gc032a->client; |
| int ret; |
| |
| dev_info(&client->dev, "%s: value: %d\n", __func__, value); |
| |
| ret = gc032a_write(client, 0xfe, 0x00); //page select |
| if (ret) |
| dev_err(&client->dev, "gc032a write 0xfe, 0x00 failed ret = %d\n",ret ); |
| ret = gc032a_write(client, 0x48, value); |
| if (ret < 0) |
| dev_err(&client->dev, "%s: error!", __func__); |
| |
| return ret; |
| } |
| |
| static int gc032a_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct gc032a *gc032a = |
| container_of(ctrl->handler, struct gc032a, ctrls); |
| int ret = -EINVAL; |
| |
| mutex_lock(&gc032a->lock); |
| /* |
| * If the device is not powered up n ow postpone applying control's |
| * value to the hardware, until it is ready to accept commands. |
| */ |
| if (gc032a->power_on == 0) { |
| mutex_unlock(&gc032a->lock); |
| return 0; |
| } |
| |
| switch (ctrl->id) { |
| |
| case V4L2_CID_BRIGHTNESS: |
| ret = gc032a_yuv_set_brightness(gc032a, ctrl->val); |
| break; |
| case V4L2_CID_POWER_LINE_FREQUENCY: |
| ret = gc032a_yuv_set_banding(gc032a, ctrl->val); |
| break; |
| case V4L2_CID_EXPOSURE: |
| ret = gc032a_set_exposure(gc032a, ctrl->val); |
| break; |
| case V4L2_CID_GAIN: |
| ret = gc032a_set_gain(gc032a, ctrl->val); |
| break; |
| case V4L2_CID_TEST_PATTERN: |
| ret = gc032a_set_test_pattern(gc032a, ctrl->val); |
| break; |
| } |
| |
| mutex_unlock(&gc032a->lock); |
| return ret; |
| } |
| |
| static const struct v4l2_ctrl_ops gc032a_ctrl_ops = { |
| .s_ctrl = gc032a_s_ctrl, |
| }; |
| |
| static const char * const gc032a_test_pattern_menu[] = { |
| "Disabled", |
| "Vertical Color Bars", |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * V4L2 subdev internal operations |
| */ |
| |
| #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API |
| static int gc032a_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct v4l2_mbus_framefmt *format = |
| v4l2_subdev_get_try_format(sd, fh->pad, 0); |
| |
| dev_dbg(&client->dev, "%s:\n", __func__); |
| |
| gc032a_get_default_format(format); |
| |
| return 0; |
| } |
| #endif |
| |
| static int gc032a_g_mbus_config(struct v4l2_subdev *sd, |
| struct v4l2_mbus_config *config) |
| { |
| config->type = V4L2_MBUS_PARALLEL; |
| config->flags = V4L2_MBUS_PCLK_SAMPLE_RISING; |
| |
| return 0; |
| } |
| |
| static int __gc032a_power_on(struct gc032a *gc032a) |
| { |
| int ret; |
| struct device *dev = &gc032a->client->dev; |
| |
| if (gc032a->power_on) |
| return 0; |
| |
| if (!IS_ERR(gc032a->power_gpio)) { |
| gpiod_set_value_cansleep(gc032a->power_gpio, 1); |
| usleep_range(2000, 5000); |
| } else if (!IS_ERR(gc032a->supplies)) { |
| ret = regulator_bulk_enable(GC032A_NUM_SUPPLIES, |
| gc032a->supplies); |
| if (ret < 0) |
| dev_err(dev, "Failed to enable regulators\n"); |
| |
| usleep_range(2000, 5000); |
| } |
| |
| asr_camera_mclk_ctrl(1); |
| usleep_range(2000, 5000); |
| |
| if (!IS_ERR(gc032a->pwdn_gpio)) { |
| gpiod_set_value_cansleep(gc032a->pwdn_gpio, 1); |
| usleep_range(2000, 5000); |
| } |
| |
| if (!IS_ERR(gc032a->pwdn_gpio)) { |
| gpiod_set_value_cansleep(gc032a->pwdn_gpio, 0); |
| usleep_range(2000, 5000); |
| } |
| |
| gc032a->power_on = true; |
| return 0; |
| } |
| |
| static void __gc032a_power_off(struct gc032a *gc032a) |
| { |
| if (!gc032a->power_on) |
| return; |
| |
| if (!IS_ERR(gc032a->pwdn_gpio)) { |
| gpiod_set_value_cansleep(gc032a->pwdn_gpio, 1); |
| usleep_range(2000, 5000); |
| } |
| |
| asr_camera_mclk_ctrl(0); |
| usleep_range(2000, 5000); |
| |
| if (!IS_ERR(gc032a->power_gpio)) { |
| gpiod_set_value_cansleep(gc032a->power_gpio, 0); |
| usleep_range(2000, 5000); |
| } else if (!IS_ERR(gc032a->supplies)) { |
| regulator_bulk_disable(GC032A_NUM_SUPPLIES, gc032a->supplies); |
| usleep_range(2000, 5000); |
| } |
| |
| if (!IS_ERR(gc032a->pwdn_gpio)) |
| gpiod_set_value_cansleep(gc032a->pwdn_gpio, 0); |
| usleep_range(7000, 10000); |
| gc032a->power_on = false; |
| } |
| |
| static int gc032a_power(struct v4l2_subdev *sd, int on) |
| { |
| int ret; |
| struct gc032a *gc032a = to_gc032a(sd); |
| struct i2c_client *client = gc032a->client; |
| |
| dev_dbg(&client->dev, "%s(%d) on(%d)\n", __func__, __LINE__, on); |
| if (on) { |
| __gc032a_power_on(gc032a); |
| ret = gc032a_write_array(client, gc032a->frame_size->regs); |
| if (ret) |
| dev_err(&client->dev, "init error\n"); |
| } else { |
| __gc032a_power_off(gc032a); |
| } |
| return 0; |
| } |
| |
| static int gc032a_enum_frame_interval(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_frame_interval_enum *fie) |
| { |
| if (fie->index >= ARRAY_SIZE(gc032a_framesizes)) |
| return -EINVAL; |
| |
| if (fie->code != MEDIA_BUS_FMT_YVYU8_2X8) |
| return -EINVAL; |
| |
| fie->width = gc032a_framesizes[fie->index].width; |
| fie->height = gc032a_framesizes[fie->index].height; |
| fie->interval = gc032a_framesizes[fie->index].max_fps; |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_core_ops gc032a_subdev_core_ops = { |
| .log_status = v4l2_ctrl_subdev_log_status, |
| .subscribe_event = v4l2_ctrl_subdev_subscribe_event, |
| .unsubscribe_event = v4l2_event_subdev_unsubscribe, |
| .ioctl = gc032a_ioctl, |
| #ifdef CONFIG_COMPAT |
| .compat_ioctl32 = gc032a_compat_ioctl32, |
| #endif |
| .s_power = gc032a_power, |
| }; |
| |
| static const struct v4l2_subdev_video_ops gc032a_subdev_video_ops = { |
| .s_stream = gc032a_s_stream, |
| .g_mbus_config = gc032a_g_mbus_config, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops gc032a_subdev_pad_ops = { |
| .enum_mbus_code = gc032a_enum_mbus_code, |
| .enum_frame_size = gc032a_enum_frame_sizes, |
| .enum_frame_interval = gc032a_enum_frame_interval, |
| .get_fmt = gc032a_get_fmt, |
| .set_fmt = gc032a_set_fmt, |
| }; |
| |
| #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API |
| static const struct v4l2_subdev_ops gc032a_subdev_ops = { |
| .core = &gc032a_subdev_core_ops, |
| .video = &gc032a_subdev_video_ops, |
| .pad = &gc032a_subdev_pad_ops, |
| }; |
| |
| static const struct v4l2_subdev_internal_ops gc032a_subdev_internal_ops = { |
| .open = gc032a_open, |
| }; |
| #endif |
| |
| static int gc032a_detect(struct gc032a *gc032a) |
| { |
| struct i2c_client *client = gc032a->client; |
| u8 pid, ver; |
| int ret; |
| |
| dev_dbg(&client->dev, "%s:\n", __func__); |
| |
| /* Check sensor revision */ |
| ret = gc032a_read(client, REG_SC_CHIP_ID_H, &pid); |
| if (!ret) |
| ret = gc032a_read(client, REG_SC_CHIP_ID_L, &ver); |
| |
| if (!ret) { |
| unsigned short id; |
| |
| id = SENSOR_ID(pid, ver); |
| if (id != GC032A_ID) { |
| ret = -1; |
| dev_err(&client->dev, |
| "Sensor detection failed (%04X, %d)\n", id, ret); |
| } else |
| dev_info(&client->dev, "Found GC%04X sensor\n", id); |
| } |
| |
| return ret; |
| } |
| |
| static int gc032a_configure_regulators(struct gc032a *gc032a) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < GC032A_NUM_SUPPLIES; i++) |
| gc032a->supplies[i].supply = gc032a_supply_names[i]; |
| |
| return devm_regulator_bulk_get(&gc032a->client->dev, |
| GC032A_NUM_SUPPLIES, |
| gc032a->supplies); |
| } |
| |
| static int gc032a_parse_of(struct gc032a *gc032a) |
| { |
| struct device *dev = &gc032a->client->dev; |
| int ret; |
| |
| gc032a->pwdn_gpio = devm_gpiod_get(dev, "pwdn", GPIOD_OUT_LOW); |
| if (IS_ERR(gc032a->pwdn_gpio)) |
| dev_err(dev, "Failed to get pwdn-gpios, maybe no used\n"); |
| |
| gc032a->power_gpio = devm_gpiod_get(dev, "power", GPIOD_OUT_LOW); |
| if (IS_ERR(gc032a->power_gpio)) { |
| dev_err(dev, "Failed to get reset-gpios, maybe no used\n"); |
| |
| ret = gc032a_configure_regulators(gc032a); |
| if (ret) |
| dev_err(dev, "Failed to get power regulators\n"); |
| } |
| |
| return __gc032a_power_on(gc032a); |
| } |
| |
| static int gc032a_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct device *dev = &client->dev; |
| struct v4l2_subdev *sd; |
| struct gc032a *gc032a; |
| int ret; |
| |
| dev_info(dev, "driver version: %02x.%02x.%02x", |
| DRIVER_VERSION >> 16, |
| (DRIVER_VERSION & 0xff00) >> 8, |
| DRIVER_VERSION & 0x00ff); |
| |
| gc032a = devm_kzalloc(&client->dev, sizeof(*gc032a), GFP_KERNEL); |
| if (!gc032a) |
| return -ENOMEM; |
| |
| gc032a->client = client; |
| |
| gc032a_parse_of(gc032a); |
| |
| v4l2_ctrl_handler_init(&gc032a->ctrls, 6); |
| gc032a->link_frequency = |
| v4l2_ctrl_new_std(&gc032a->ctrls, &gc032a_ctrl_ops, |
| V4L2_CID_PIXEL_RATE, 0, |
| GC032A_PIXEL_RATE, 1, |
| GC032A_PIXEL_RATE); |
| v4l2_ctrl_new_std_menu_items(&gc032a->ctrls, &gc032a_ctrl_ops, |
| V4L2_CID_TEST_PATTERN, |
| ARRAY_SIZE(gc032a_test_pattern_menu) - 1, |
| 0, 0, gc032a_test_pattern_menu); |
| v4l2_ctrl_new_std(&gc032a->ctrls, &gc032a_ctrl_ops, |
| V4L2_CID_EXPOSURE, 1, 32, 1, 32); |
| v4l2_ctrl_new_std(&gc032a->ctrls, &gc032a_ctrl_ops, |
| V4L2_CID_GAIN, 16, 1023, 1, 16); |
| v4l2_ctrl_new_std_menu(&gc032a->ctrls, &gc032a_ctrl_ops, |
| V4L2_CID_POWER_LINE_FREQUENCY, |
| V4L2_CID_POWER_LINE_FREQUENCY_60HZ, ~0x7, |
| V4L2_CID_POWER_LINE_FREQUENCY_50HZ); |
| |
| v4l2_ctrl_new_std(&gc032a->ctrls, &gc032a_ctrl_ops, |
| V4L2_CID_BRIGHTNESS, 0, 9, 1, 0); |
| |
| gc032a->sd.ctrl_handler = &gc032a->ctrls; |
| |
| if (gc032a->ctrls.error) { |
| dev_err(&client->dev, "%s: control initialization error %d\n", |
| __func__, gc032a->ctrls.error); |
| return gc032a->ctrls.error; |
| } |
| |
| sd = &gc032a->sd; |
| //client->flags |= I2C_CLIENT_SCCB; |
| #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API |
| v4l2_i2c_subdev_init(sd, client, &gc032a_subdev_ops); |
| |
| sd->internal_ops = &gc032a_subdev_internal_ops; |
| sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | |
| V4L2_SUBDEV_FL_HAS_EVENTS; |
| #endif |
| |
| #if defined(CONFIG_MEDIA_CONTROLLER) |
| gc032a->pad.flags = MEDIA_PAD_FL_SOURCE; |
| sd->entity.function = MEDIA_ENT_F_CAM_SENSOR; |
| ret = media_entity_pads_init(&sd->entity, 1, &gc032a->pad); |
| if (ret < 0) { |
| v4l2_ctrl_handler_free(&gc032a->ctrls); |
| return ret; |
| } |
| #endif |
| |
| mutex_init(&gc032a->lock); |
| |
| gc032a_get_default_format(&gc032a->format); |
| gc032a->frame_size = &gc032a_framesizes[0]; |
| |
| ret = gc032a_detect(gc032a); |
| if (ret < 0) |
| goto error; |
| ret = gc032a_write_array(client, gc032a->frame_size->regs); |
| if (ret) |
| dev_err(&client->dev, "init error\n"); |
| snprintf(sd->name, sizeof(sd->name), "m_%s %s", |
| DRIVER_NAME, dev_name(sd->dev)); |
| |
| ret = v4l2_async_register_subdev_sensor_common(sd); |
| if (ret) |
| goto error; |
| |
| dev_info(&client->dev, "%s sensor driver registered !!\n", sd->name); |
| return 0; |
| |
| error: |
| v4l2_ctrl_handler_free(&gc032a->ctrls); |
| #if defined(CONFIG_MEDIA_CONTROLLER) |
| media_entity_cleanup(&sd->entity); |
| #endif |
| mutex_destroy(&gc032a->lock); |
| __gc032a_power_off(gc032a); |
| return ret; |
| } |
| |
| static int gc032a_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct gc032a *gc032a = to_gc032a(sd); |
| |
| dev_dbg(&client->dev, "gc032a_remove...\n"); |
| |
| v4l2_ctrl_handler_free(&gc032a->ctrls); |
| v4l2_async_unregister_subdev(sd); |
| #if defined(CONFIG_MEDIA_CONTROLLER) |
| media_entity_cleanup(&sd->entity); |
| #endif |
| mutex_destroy(&gc032a->lock); |
| |
| __gc032a_power_off(gc032a); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id gc032a_id[] = { |
| { "gc032a", 0 }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, gc032a_id); |
| |
| #if IS_ENABLED(CONFIG_OF) |
| static const struct of_device_id gc032a_of_match[] = { |
| { .compatible = "galaxycore,gc032a", }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, gc032a_of_match); |
| #endif |
| |
| static struct i2c_driver gc032a_i2c_driver = { |
| .driver = { |
| .name = DRIVER_NAME, |
| .of_match_table = of_match_ptr(gc032a_of_match), |
| }, |
| .probe = gc032a_probe, |
| .remove = gc032a_remove, |
| .id_table = gc032a_id, |
| }; |
| |
| static int __init sensor_mod_init(void) |
| { |
| return i2c_add_driver(&gc032a_i2c_driver); |
| } |
| |
| static void __exit sensor_mod_exit(void) |
| { |
| i2c_del_driver(&gc032a_i2c_driver); |
| } |
| |
| device_initcall_sync(sensor_mod_init); |
| module_exit(sensor_mod_exit); |
| //module_i2c_driver(gc032a_i2c_driver); |
| |
| MODULE_AUTHOR("ASR Inc."); |
| MODULE_DESCRIPTION("GC032A CMOS Image Sensor driver"); |
| MODULE_LICENSE("GPL v2"); |