| From: Sebastian Gottschall <s.gottschall@newmedia-net.de> |
| |
| Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984 based |
| chipsets with on chipset connected led's using WMI Firmware API. The LED |
| device will get available named as "ath10k-phyX" at sysfs and can be controlled |
| with various triggers. adds also debugfs interface for gpio control. |
| |
| This patch is specific for OpenWRt base, as is use old backported package |
| with old wireless source. Support for QCA9984 is removed. |
| Reworked to use ath10k-ct custom source |
| |
| |
| Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> |
| Reviewed-by: Steve deRosier <derosier@cal-sierra.com> |
| [kvalo: major reorg and cleanup] |
| Signed-off-by: Kalle Valo <kvalo@codeaurora.org> |
| Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> |
| --- |
| |
| v13: |
| |
| * only compile tested! |
| |
| * fix all checkpatch warnings |
| |
| * fix commit log |
| |
| * sizeof(struct ath10k_gpiocontrol) -> sizeof(*gpio) |
| |
| * unsigned -> unsigned int |
| |
| * remove GPIOLIB code, that should be added in a separate patch |
| |
| * rename gpio.c to leds.c |
| |
| * add leds.h |
| |
| * rename some functions: |
| |
| ath10k_attach_led() -> ath10k_leds_register() |
| ath10k_unregister_led() -> ath10k_leds_unregister() |
| ath10k_reset_led_pin() -> ath10k_leds_start() |
| |
| * call ath10k_leds_unregister() before ath10k_thermal_unregister() to preserve ordering |
| |
| * call ath10k_leds_start() only from ath10k_core_start() and not from mac.c |
| |
| * rename struct ath10k_gpiocontrol as anonymous function under struct |
| ath10k::leds, no need for memory allocation |
| |
| * merge ath10k_add_led() to ath10k_attach_led(), which is it's only caller |
| |
| * remove #if IS_ENABLED() checks from most of places, memory savings from those were not worth it |
| |
| * Kconfig help text improvement and move it lower in the menu, also don't enable it by default |
| |
| * switch to set_brightness_blocking() so that the callback can sleep, |
| then no need to use ath10k_wmi_cmd_send_nowait() and can take mutex |
| to access ar->state |
| |
| * don't touch ath10k_wmi_pdev_get_temperature() |
| |
| * as QCA6174/QCA9377 are not (yet) supported don't add the command to WMI-TLV interface |
| |
| * remove debugfs interface, that should be added in another patch |
| |
| * cleanup includes |
| |
| ath10k-5.10/Kconfig | 10 +++ |
| ath10k-5.10/Makefile | 1 + |
| ath10k-5.10/core.c | 22 +++++++ |
| ath10k-5.10/core.h | 9 ++- |
| ath10k-5.10/hw.h | 1 + |
| ath10k-5.10/leds.c | 103 ++++++++++++++++++++++++++++++ |
| ath10k-5.10/leds.h | 45 +++++++++++++ |
| ath10k-5.10/mac.c | 1 + |
| ath10k-5.10/wmi-ops.h | 32 ++++++++++ |
| ath10k-5.10/wmi-tlv.c | 2 + |
| ath10k-5.10/wmi.c | 54 ++++++++++++++++ |
| ath10k-5.10/wmi.h | 35 ++++++++++ |
| 12 files changed, 314 insertions(+), 1 deletion(-) |
| create mode 100644 ath10k-5.10/leds.c |
| create mode 100644 ath10k-5.10/leds.h |
| |
| --- a/ath10k-5.10/Kconfig |
| +++ b/ath10k-5.10/Kconfig |
| @@ -65,6 +65,16 @@ config ATH10K_DEBUGFS |
| |
| If unsure, say Y to make it easier to debug problems. |
| |
| +config ATH10K_LEDS |
| + bool "Atheros ath10k LED support" |
| + depends on ATH10K |
| + select MAC80211_LEDS |
| + select LEDS_CLASS |
| + select NEW_LEDS |
| + default y |
| + ---help--- |
| + This option is necessary, if you want LED support for chipset connected led pins. If unsure, say N. |
| + |
| config ATH10K_SPECTRAL |
| bool "Atheros ath10k spectral scan support" |
| depends on ATH10K_DEBUGFS |
| --- a/ath10k-5.10/Makefile |
| +++ b/ath10k-5.10/Makefile |
| @@ -20,6 +20,7 @@ ath10k_core-$(CONFIG_ATH10K_SPECTRAL) += |
| ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o |
| ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o |
| ath10k_core-$(CONFIG_THERMAL) += thermal.o |
| +ath10k_core-$(CONFIG_ATH10K_LEDS) += leds.o |
| ath10k_core-$(CONFIG_MAC80211_DEBUGFS) += debugfs_sta.o |
| ath10k_core-$(CONFIG_PM) += wow.o |
| ath10k_core-$(CONFIG_ATH10K_CE) += ce.o |
| --- a/ath10k-5.10/core.c |
| +++ b/ath10k-5.10/core.c |
| @@ -26,6 +26,7 @@ |
| #include "testmode.h" |
| #include "wmi-ops.h" |
| #include "coredump.h" |
| +#include "leds.h" |
| |
| /* Disable ath10k-ct DBGLOG output by default */ |
| unsigned int ath10k_debug_mask = ATH10K_DBG_NO_DBGLOG; |
| @@ -68,6 +69,7 @@ static const struct ath10k_hw_params ath |
| .dev_id = QCA988X_2_0_DEVICE_ID, |
| .bus = ATH10K_BUS_PCI, |
| .name = "qca988x hw2.0", |
| + .led_pin = 1, |
| .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR, |
| .uart_pin = 7, |
| .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, |
| @@ -137,6 +139,7 @@ static const struct ath10k_hw_params ath |
| .dev_id = QCA9887_1_0_DEVICE_ID, |
| .bus = ATH10K_BUS_PCI, |
| .name = "qca9887 hw1.0", |
| + .led_pin = 1, |
| .patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR, |
| .uart_pin = 7, |
| .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, |
| @@ -342,6 +345,7 @@ static const struct ath10k_hw_params ath |
| .dev_id = QCA99X0_2_0_DEVICE_ID, |
| .bus = ATH10K_BUS_PCI, |
| .name = "qca99x0 hw2.0", |
| + .led_pin = 17, |
| .patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR, |
| .uart_pin = 7, |
| .otp_exe_param = 0x00000700, |
| @@ -382,6 +386,7 @@ static const struct ath10k_hw_params ath |
| .dev_id = QCA9984_1_0_DEVICE_ID, |
| .bus = ATH10K_BUS_PCI, |
| .name = "qca9984/qca9994 hw1.0", |
| + .led_pin = 17, |
| .patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR, |
| .uart_pin = 7, |
| .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, |
| @@ -429,6 +434,7 @@ static const struct ath10k_hw_params ath |
| .dev_id = QCA9888_2_0_DEVICE_ID, |
| .bus = ATH10K_BUS_PCI, |
| .name = "qca9888 hw2.0", |
| + .led_pin = 17, |
| .patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR, |
| .uart_pin = 7, |
| .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, |
| @@ -3705,6 +3711,10 @@ int ath10k_core_start(struct ath10k *ar, |
| ath10k_wmi_check_apply_board_power_ctl_table(ar); |
| } |
| |
| + status = ath10k_leds_start(ar); |
| + if (status) |
| + goto err_hif_stop; |
| + |
| return 0; |
| |
| err_hif_stop: |
| @@ -3963,9 +3973,18 @@ static void ath10k_core_register_work(st |
| goto err_spectral_destroy; |
| } |
| |
| + status = ath10k_leds_register(ar); |
| + if (status) { |
| + ath10k_err(ar, "could not register leds: %d\n", |
| + status); |
| + goto err_thermal_unregister; |
| + } |
| + |
| set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags); |
| return; |
| |
| +err_thermal_unregister: |
| + ath10k_thermal_unregister(ar); |
| err_spectral_destroy: |
| ath10k_spectral_destroy(ar); |
| err_debug_destroy: |
| @@ -4025,6 +4044,8 @@ void ath10k_core_unregister(struct ath10 |
| if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags)) |
| return; |
| |
| + ath10k_leds_unregister(ar); |
| + |
| ath10k_thermal_unregister(ar); |
| /* Stop spectral before unregistering from mac80211 to remove the |
| * relayfs debugfs file cleanly. Otherwise the parent debugfs tree |
| --- a/ath10k-5.10/core.h |
| +++ b/ath10k-5.10/core.h |
| @@ -14,6 +14,7 @@ |
| #include <linux/pci.h> |
| #include <linux/uuid.h> |
| #include <linux/time.h> |
| +#include <linux/leds.h> |
| |
| #include "htt.h" |
| #include "htc.h" |
| @@ -1557,6 +1558,13 @@ struct ath10k { |
| } testmode; |
| |
| struct { |
| + struct gpio_led wifi_led; |
| + struct led_classdev cdev; |
| + char label[48]; |
| + u32 gpio_state_pin; |
| + } leds; |
| + |
| + struct { |
| /* protected by data_lock */ |
| u32 rx_crc_err_drop; |
| u32 fw_crash_counter; |
| --- a/ath10k-5.10/hw.h |
| +++ b/ath10k-5.10/hw.h |
| @@ -521,6 +521,7 @@ struct ath10k_hw_params { |
| const char *name; |
| u32 patch_load_addr; |
| int uart_pin; |
| + int led_pin; |
| u32 otp_exe_param; |
| |
| /* Type of hw cycle counter wraparound logic, for more info |
| --- /dev/null |
| +++ b/ath10k-5.10/leds.c |
| @@ -0,0 +1,103 @@ |
| +/* |
| + * Copyright (c) 2005-2011 Atheros Communications Inc. |
| + * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. |
| + * Copyright (c) 2018 Sebastian Gottschall <s.gottschall@dd-wrt.com> |
| + * Copyright (c) 2018, The Linux Foundation. All rights reserved. |
| + * |
| + * Permission to use, copy, modify, and/or distribute this software for any |
| + * purpose with or without fee is hereby granted, provided that the above |
| + * copyright notice and this permission notice appear in all copies. |
| + * |
| + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| + */ |
| + |
| +#include <linux/leds.h> |
| + |
| +#include "core.h" |
| +#include "wmi.h" |
| +#include "wmi-ops.h" |
| + |
| +#include "leds.h" |
| + |
| +static int ath10k_leds_set_brightness_blocking(struct led_classdev *led_cdev, |
| + enum led_brightness brightness) |
| +{ |
| + struct ath10k *ar = container_of(led_cdev, struct ath10k, |
| + leds.cdev); |
| + struct gpio_led *led = &ar->leds.wifi_led; |
| + |
| + mutex_lock(&ar->conf_mutex); |
| + |
| + if (ar->state != ATH10K_STATE_ON) |
| + goto out; |
| + |
| + ar->leds.gpio_state_pin = (brightness != LED_OFF) ^ led->active_low; |
| + ath10k_wmi_gpio_output(ar, led->gpio, ar->leds.gpio_state_pin); |
| + |
| +out: |
| + mutex_unlock(&ar->conf_mutex); |
| + |
| + return 0; |
| +} |
| + |
| +int ath10k_leds_start(struct ath10k *ar) |
| +{ |
| + if (ar->hw_params.led_pin == 0) |
| + /* leds not supported */ |
| + return 0; |
| + |
| + /* under some circumstances, the gpio pin gets reconfigured |
| + * to default state by the firmware, so we need to |
| + * reconfigure it this behaviour has only ben seen on |
| + * QCA9984 and QCA99XX devices so far |
| + */ |
| + ath10k_wmi_gpio_config(ar, ar->hw_params.led_pin, 0, |
| + WMI_GPIO_PULL_NONE, WMI_GPIO_INTTYPE_DISABLE); |
| + ath10k_wmi_gpio_output(ar, ar->hw_params.led_pin, 1); |
| + |
| + return 0; |
| +} |
| + |
| +int ath10k_leds_register(struct ath10k *ar) |
| +{ |
| + int ret; |
| + |
| + if (ar->hw_params.led_pin == 0) |
| + /* leds not supported */ |
| + return 0; |
| + |
| + snprintf(ar->leds.label, sizeof(ar->leds.label), "ath10k-%s", |
| + wiphy_name(ar->hw->wiphy)); |
| + ar->leds.wifi_led.active_low = 1; |
| + ar->leds.wifi_led.gpio = ar->hw_params.led_pin; |
| + ar->leds.wifi_led.name = ar->leds.label; |
| + ar->leds.wifi_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; |
| + |
| + ar->leds.cdev.name = ar->leds.label; |
| + ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking; |
| + |
| + /* FIXME: this assignment doesn't make sense as it's NULL, remove it? */ |
| + ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger; |
| + |
| + ret = led_classdev_register(wiphy_dev(ar->hw->wiphy), &ar->leds.cdev); |
| + if (ret) |
| + return ret; |
| + |
| + return 0; |
| +} |
| + |
| +void ath10k_leds_unregister(struct ath10k *ar) |
| +{ |
| + if (ar->hw_params.led_pin == 0) |
| + /* leds not supported */ |
| + return; |
| + |
| + led_classdev_unregister(&ar->leds.cdev); |
| +} |
| + |
| --- /dev/null |
| +++ b/ath10k-5.10/leds.h |
| @@ -0,0 +1,41 @@ |
| +/* |
| + * Copyright (c) 2018, The Linux Foundation. All rights reserved. |
| + * |
| + * Permission to use, copy, modify, and/or distribute this software for any |
| + * purpose with or without fee is hereby granted, provided that the above |
| + * copyright notice and this permission notice appear in all copies. |
| + * |
| + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| + */ |
| +#ifndef _LEDS_H_ |
| +#define _LEDS_H_ |
| + |
| +#include "core.h" |
| + |
| +#ifdef CONFIG_ATH10K_LEDS |
| +void ath10k_leds_unregister(struct ath10k *ar); |
| +int ath10k_leds_start(struct ath10k *ar); |
| +int ath10k_leds_register(struct ath10k *ar); |
| +#else |
| +static inline void ath10k_leds_unregister(struct ath10k *ar) |
| +{ |
| +} |
| + |
| +static inline int ath10k_leds_start(struct ath10k *ar) |
| +{ |
| + return 0; |
| +} |
| + |
| +static inline int ath10k_leds_register(struct ath10k *ar) |
| +{ |
| + return 0; |
| +} |
| + |
| +#endif |
| +#endif /* _LEDS_H_ */ |
| --- a/ath10k-5.10/mac.c |
| +++ b/ath10k-5.10/mac.c |
| @@ -25,6 +25,7 @@ |
| #include "wmi-tlv.h" |
| #include "wmi-ops.h" |
| #include "wow.h" |
| +#include "leds.h" |
| |
| /*********/ |
| /* Rates */ |
| --- a/ath10k-5.10/wmi-ops.h |
| +++ b/ath10k-5.10/wmi-ops.h |
| @@ -228,7 +228,10 @@ struct wmi_ops { |
| const struct wmi_bb_timing_cfg_arg *arg); |
| struct sk_buff *(*gen_per_peer_per_tid_cfg)(struct ath10k *ar, |
| const struct wmi_per_peer_per_tid_cfg_arg *arg); |
| + struct sk_buff *(*gen_gpio_config)(struct ath10k *ar, u32 gpio_num, |
| + u32 input, u32 pull_type, u32 intr_mode); |
| |
| + struct sk_buff *(*gen_gpio_output)(struct ath10k *ar, u32 gpio_num, u32 set); |
| }; |
| |
| int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); |
| @@ -1147,6 +1150,35 @@ ath10k_wmi_force_fw_hang(struct ath10k * |
| return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->force_fw_hang_cmdid); |
| } |
| |
| +static inline int ath10k_wmi_gpio_config(struct ath10k *ar, u32 gpio_num, |
| + u32 input, u32 pull_type, u32 intr_mode) |
| +{ |
| + struct sk_buff *skb; |
| + |
| + if (!ar->wmi.ops->gen_gpio_config) |
| + return -EOPNOTSUPP; |
| + |
| + skb = ar->wmi.ops->gen_gpio_config(ar, gpio_num, input, pull_type, intr_mode); |
| + if (IS_ERR(skb)) |
| + return PTR_ERR(skb); |
| + |
| + return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_config_cmdid); |
| +} |
| + |
| +static inline int ath10k_wmi_gpio_output(struct ath10k *ar, u32 gpio_num, u32 set) |
| +{ |
| + struct sk_buff *skb; |
| + |
| + if (!ar->wmi.ops->gen_gpio_config) |
| + return -EOPNOTSUPP; |
| + |
| + skb = ar->wmi.ops->gen_gpio_output(ar, gpio_num, set); |
| + if (IS_ERR(skb)) |
| + return PTR_ERR(skb); |
| + |
| + return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_output_cmdid); |
| +} |
| + |
| static inline int |
| ath10k_wmi_dbglog_cfg(struct ath10k *ar, u64 module_enable, u32 log_level) |
| { |
| --- a/ath10k-5.10/wmi-tlv.c |
| +++ b/ath10k-5.10/wmi-tlv.c |
| @@ -4594,6 +4594,8 @@ static const struct wmi_ops wmi_tlv_ops |
| .gen_echo = ath10k_wmi_tlv_op_gen_echo, |
| .gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf, |
| .gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable, |
| + /* .gen_gpio_config not implemented */ |
| + /* .gen_gpio_output not implemented */ |
| }; |
| |
| static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = { |
| --- a/ath10k-5.10/wmi.c |
| +++ b/ath10k-5.10/wmi.c |
| @@ -8409,6 +8409,49 @@ ath10k_wmi_op_gen_peer_set_param(struct |
| return skb; |
| } |
| |
| +static struct sk_buff *ath10k_wmi_op_gen_gpio_config(struct ath10k *ar, |
| + u32 gpio_num, u32 input, |
| + u32 pull_type, u32 intr_mode) |
| +{ |
| + struct wmi_gpio_config_cmd *cmd; |
| + struct sk_buff *skb; |
| + |
| + skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd)); |
| + if (!skb) |
| + return ERR_PTR(-ENOMEM); |
| + |
| + cmd = (struct wmi_gpio_config_cmd *)skb->data; |
| + cmd->pull_type = __cpu_to_le32(pull_type); |
| + cmd->gpio_num = __cpu_to_le32(gpio_num); |
| + cmd->input = __cpu_to_le32(input); |
| + cmd->intr_mode = __cpu_to_le32(intr_mode); |
| + |
| + ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_config gpio_num 0x%08x input 0x%08x pull_type 0x%08x intr_mode 0x%08x\n", |
| + gpio_num, input, pull_type, intr_mode); |
| + |
| + return skb; |
| +} |
| + |
| +static struct sk_buff *ath10k_wmi_op_gen_gpio_output(struct ath10k *ar, |
| + u32 gpio_num, u32 set) |
| +{ |
| + struct wmi_gpio_output_cmd *cmd; |
| + struct sk_buff *skb; |
| + |
| + skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd)); |
| + if (!skb) |
| + return ERR_PTR(-ENOMEM); |
| + |
| + cmd = (struct wmi_gpio_output_cmd *)skb->data; |
| + cmd->gpio_num = __cpu_to_le32(gpio_num); |
| + cmd->set = __cpu_to_le32(set); |
| + |
| + ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_output gpio_num 0x%08x set 0x%08x\n", |
| + gpio_num, set); |
| + |
| + return skb; |
| +} |
| + |
| static struct sk_buff * |
| ath10k_wmi_op_gen_set_psmode(struct ath10k *ar, u32 vdev_id, |
| enum wmi_sta_ps_mode psmode) |
| @@ -10238,6 +10281,9 @@ static const struct wmi_ops wmi_ops = { |
| .fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill, |
| .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, |
| .gen_echo = ath10k_wmi_op_gen_echo, |
| + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, |
| + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, |
| + |
| /* .gen_bcn_tmpl not implemented */ |
| /* .gen_prb_tmpl not implemented */ |
| /* .gen_p2p_go_bcn_ie not implemented */ |
| @@ -10308,6 +10354,8 @@ static const struct wmi_ops wmi_10_1_ops |
| .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill, |
| .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, |
| .gen_echo = ath10k_wmi_op_gen_echo, |
| + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, |
| + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, |
| /* .gen_bcn_tmpl not implemented */ |
| /* .gen_prb_tmpl not implemented */ |
| /* .gen_p2p_go_bcn_ie not implemented */ |
| @@ -10387,6 +10435,8 @@ static const struct wmi_ops wmi_10_2_ops |
| .gen_delba_send = ath10k_wmi_op_gen_delba_send, |
| .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill, |
| .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, |
| + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, |
| + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, |
| /* .gen_pdev_enable_adaptive_cca not implemented */ |
| }; |
| |
| @@ -10458,6 +10508,8 @@ static const struct wmi_ops wmi_10_2_4_o |
| ath10k_wmi_op_gen_pdev_enable_adaptive_cca, |
| .get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype, |
| .gen_bb_timing = ath10k_wmi_10_2_4_op_gen_bb_timing, |
| + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, |
| + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, |
| /* .gen_bcn_tmpl not implemented */ |
| /* .gen_prb_tmpl not implemented */ |
| /* .gen_p2p_go_bcn_ie not implemented */ |
| @@ -10540,6 +10592,8 @@ static const struct wmi_ops wmi_10_4_ops |
| .gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info, |
| .gen_echo = ath10k_wmi_op_gen_echo, |
| .gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config, |
| + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, |
| + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, |
| }; |
| |
| int ath10k_wmi_attach(struct ath10k *ar) |
| --- a/ath10k-5.10/wmi.h |
| +++ b/ath10k-5.10/wmi.h |
| @@ -3133,6 +3133,41 @@ enum wmi_10_4_feature_mask { |
| |
| }; |
| |
| +/* WMI_GPIO_CONFIG_CMDID */ |
| +enum { |
| + WMI_GPIO_PULL_NONE, |
| + WMI_GPIO_PULL_UP, |
| + WMI_GPIO_PULL_DOWN, |
| +}; |
| + |
| +enum { |
| + WMI_GPIO_INTTYPE_DISABLE, |
| + WMI_GPIO_INTTYPE_RISING_EDGE, |
| + WMI_GPIO_INTTYPE_FALLING_EDGE, |
| + WMI_GPIO_INTTYPE_BOTH_EDGE, |
| + WMI_GPIO_INTTYPE_LEVEL_LOW, |
| + WMI_GPIO_INTTYPE_LEVEL_HIGH |
| +}; |
| + |
| +/* WMI_GPIO_CONFIG_CMDID */ |
| +struct wmi_gpio_config_cmd { |
| + __le32 gpio_num; /* GPIO number to be setup */ |
| + __le32 input; /* 0 - Output/ 1 - Input */ |
| + __le32 pull_type; /* Pull type defined above */ |
| + __le32 intr_mode; /* Interrupt mode defined above (Input) */ |
| +} __packed; |
| + |
| +/* WMI_GPIO_OUTPUT_CMDID */ |
| +struct wmi_gpio_output_cmd { |
| + __le32 gpio_num; /* GPIO number to be setup */ |
| + __le32 set; /* Set the GPIO pin*/ |
| +} __packed; |
| + |
| +/* WMI_GPIO_INPUT_EVENTID */ |
| +struct wmi_gpio_input_event { |
| + __le32 gpio_num; /* GPIO number which changed state */ |
| +} __packed; |
| + |
| struct wmi_ext_resource_config_10_4_cmd { |
| /* contains enum wmi_host_platform_type */ |
| __le32 host_platform_config; |