package/kernel/realtek-wl/files/script/mywlan_8192c.sh - T108 - Gitiles

 #!/bin/sh
 #
 # script file to start WLAN
 #
 if [ $# -lt 3 ]; then echo "Usage: $0 wlan root type";  exit 1 ; fi

 #echo "my: [$1] [$2] [$3]"

 if [ "$1" == "wlan0" ];  then
 	CONFIG_ROOT_DIR="/var/rtl8192c"
 elif [ "$1" == "wlan1" ]; then
 	CONFIG_ROOT_DIR="/var/rtl8192cd"
 else
 	echo "--interface is not right  $1"
 fi
 CONFIG_DIR=$CONFIG_ROOT_DIR/$1

 if [ -z "$SCRIPT_DIR" ]; then
 	SCRIPT_DIR=`cat $CONFIG_ROOT_DIR/wifi_script_dir`
 fi
 START_WLAN_APP=$SCRIPT_DIR/wlanapp_8192c.sh

 #if [ -z "$ROOT_WLAN" ]; then
 #	ROOT_WLAN=`echo $1 | cut -b -5`
 #fi

 OP_INTF=$1
 ROOT_WLAN=$2
 EXT=$3

 ROOT_CONFIG_DIR=$CONFIG_ROOT_DIR/$ROOT_WLAN

 SET_WLAN="iwpriv $1"
 SET_WLAN_PARAM="$SET_WLAN set_mib"
 IFCONFIG=ifconfig

 ## Disable WLAN MAC driver and shutdown interface first ##
 $IFCONFIG $OP_INTF down

 GET_VALUE=
 GET_VALUE_TMP=
 GET_VALUE_WLAN_DISABLED=`cat $CONFIG_DIR/wlan_disabled`
 GET_VALUE_WLAN_MODE=`cat $CONFIG_DIR/wlan_mode`

 ##$SET_WLAN set_mib vap_enable=0

 ## kill wlan application daemon ##

 ##$START_WLAN_APP kill $1

 ## Set parameters to driver ##

 GET_VALUE=`cat $ROOT_CONFIG_DIR/reg_domain`
 $SET_WLAN set_mib regdomain=$GET_VALUE

 #EXT=`echo $1 | cut -b 7-8`
 NUM=0
 if [ "$EXT" = "va" ] ; then
 	NUM=${1#w*va};
 	NUM=$((NUM +1))
 #	NUM=`echo $1 | cut -b 9`
 #	NUM=`expr $NUM + 1`
 fi

 GET_VALUE=`cat $ROOT_CONFIG_DIR/wlan${NUM}_addr`
 $IFCONFIG $OP_INTF hw ether $GET_VALUE

 IS_ROOT_WLAN=0;
 if [ "$EXT" = "root" ] ; then
 	IS_ROOT_WLAN=1;
 fi

 if [ "$GET_VALUE_WLAN_MODE" = '1' ]; then
 	## client mode
 	GET_VALUE=`cat $CONFIG_DIR/network_type`
 	if  [ "$GET_VALUE" = '0' ]; then
 		$SET_WLAN set_mib opmode=8
 	else
 		$SET_WLAN set_mib opmode=32
 		GET_VALUE_TMP=`cat $CONFIG_DIR/default_ssid`
 		$SET_WLAN set_mib defssid="$GET_VALUE_TMP"
 	fi
 else
 	## AP mode
 	$SET_WLAN set_mib opmode=16
 fi
 ##$IFCONFIG $OP_INTF hw ether $WLAN_MAC_ADDR

 ##if [ "$GET_VALUE_WLAN_MODE" = '2' ]; then
 ##		$SET_WLAN set_mib wds_pure=1
 ##else
 ##		$SET_WLAN set_mib wds_pure=0
 ##fi

 # set RF parameters
 if [ $IS_ROOT_WLAN = 1 ]; then
 	GET_VALUE=`cat $CONFIG_DIR/channel`
 	$SET_WLAN set_mib channel=$GET_VALUE

 	GET_VALUE=`cat $CONFIG_DIR/ch_hi`
 	$SET_WLAN set_mib ch_hi=$GET_VALUE

 	GET_VALUE=`cat $CONFIG_DIR/ch_low`
 	$SET_WLAN set_mib ch_low=$GET_VALUE

 	GET_VALUE=`cat $CONFIG_DIR/led_type`
 	$SET_WLAN set_mib led_type=$GET_VALUE

 	GET_VALUE=`cat $CONFIG_DIR/MIMO_TR_mode`
 	$SET_WLAN set_mib MIMO_TR_mode=$GET_VALUE

 	GET_TX_POWER_CCK_A=`cat $CONFIG_DIR/tx_power_cck_a`
 	GET_TX_POWER_CCK_B=`cat $CONFIG_DIR/tx_power_cck_b`
 	GET_TX_POWER_HT40_1S_A=`cat $CONFIG_DIR/tx_power_ht40_1s_a`
 	GET_TX_POWER_HT40_1S_B=`cat $CONFIG_DIR/tx_power_ht40_1s_b`

 	GET_TX_POWER_DIFF_HT40_2S=`cat $CONFIG_DIR/tx_power_diff_ht40_2s`
 	GET_TX_POWER_DIFF_HT20=`cat $CONFIG_DIR/tx_power_diff_ht20`
 	GET_TX_POWER_DIFF_OFDM=`cat $CONFIG_DIR/tx_power_diff_ofdm`

 	$SET_WLAN set_mib pwrlevelCCK_A=$GET_TX_POWER_CCK_A
 	$SET_WLAN set_mib pwrlevelCCK_B=$GET_TX_POWER_CCK_B
 	$SET_WLAN set_mib pwrlevelHT40_1S_A=$GET_TX_POWER_HT40_1S_A
 	$SET_WLAN set_mib pwrlevelHT40_1S_B=$GET_TX_POWER_HT40_1S_B
 	$SET_WLAN set_mib pwrdiffHT40_2S=$GET_TX_POWER_DIFF_HT40_2S
 	$SET_WLAN set_mib pwrdiffHT20=$GET_TX_POWER_DIFF_HT20
 	$SET_WLAN set_mib pwrdiffOFDM=$GET_TX_POWER_DIFF_OFDM

 	GET_11N_TSSI1=`cat $CONFIG_DIR/tssi_1`
 	$SET_WLAN set_mib tssi1=$GET_11N_TSSI1
 	GET_11N_TSSI2=`cat $CONFIG_DIR/tssi_2`
 	$SET_WLAN set_mib tssi2=$GET_11N_TSSI2

 	GET_VALUE=`cat $CONFIG_DIR/11n_ther`
 	$SET_WLAN set_mib ther=$GET_VALUE

 	GET_VALUE=`cat $CONFIG_DIR/trswitch`
 	$SET_WLAN set_mib trswitch=$GET_VALUE

 	GET_VALUE=`cat $CONFIG_DIR/11n_xcap`
 	$SET_WLAN set_mib xcap=$GET_VALUE

 	GET_VALUE=`cat $ROOT_CONFIG_DIR/beacon_interval`
 	$SET_WLAN set_mib bcnint=$GET_VALUE

 	GET_VALUE=`cat $CONFIG_DIR/dtim_period`
 	$SET_WLAN set_mib dtimperiod=$GET_VALUE
 fi # [ $IS_ROOT_WLAN = 1 ]

 GET_VALUE=`cat $CONFIG_DIR/basic_rates`
 $SET_WLAN set_mib basicrates=$GET_VALUE

 GET_VALUE=`cat $CONFIG_DIR/supported_rate`
 $SET_WLAN set_mib oprates=$GET_VALUE

 GET_RATE_ADAPTIVE_VALUE=`cat $CONFIG_DIR/rate_adaptive_enabled`
 if [ "$GET_RATE_ADAPTIVE_VALUE" = '0' ]; then
 	$SET_WLAN set_mib autorate=0
 	GET_FIX_RATE_VALUE=`cat $CONFIG_DIR/fix_rate`
 	$SET_WLAN set_mib fixrate=$GET_FIX_RATE_VALUE
 else
 	$SET_WLAN set_mib autorate=1
 fi

 GET_VALUE=`cat $CONFIG_DIR/rts_threshold`
 $SET_WLAN set_mib rtsthres=$GET_VALUE

 GET_VALUE=`cat $CONFIG_DIR/frag_threshold`
 $SET_WLAN set_mib fragthres=$GET_VALUE

 GET_VALUE=`cat $CONFIG_DIR/inactivity_time`
 $SET_WLAN set_mib expired_time=$GET_VALUE

 GET_VALUE=`cat $CONFIG_DIR/preamble_type`
 $SET_WLAN set_mib preamble=$GET_VALUE


 GET_VALUE=`cat $CONFIG_DIR/hidden_ssid`
 $SET_WLAN set_mib hiddenAP=$GET_VALUE


 if [ "$OP_INTF" = "$ROOT_WLAN-vxd" ]; then
 	GET_VALUE=`cat $CONFIG_ROOT_DIR/repeater_ssid`
 else
 	GET_VALUE=`cat $CONFIG_DIR/ssid`
 fi
 $SET_WLAN set_mib ssid=$GET_VALUE

 GET_VALUE=`cat $CONFIG_DIR/macac_enabled`
 $SET_WLAN set_mib aclmode=$GET_VALUE
 $SET_WLAN set_mib aclnum=0

 ACL_NUM=`cat $CONFIG_DIR/macac_num`
 ITEM="1 2 3 4 5 6 7 8 9 10"
 #for (( i=1; i<=$ACL_NUM; i=i+1 ))
 if [ "0" != "$ACL_NUM" ]; then
    for i in $ITEM
    do
 	#echo "acl $i"
 	GET_VALUE=`cat $CONFIG_DIR/macac_addr$i`
 	$SET_WLAN set_mib acladdr=$GET_VALUE
 	if [ "$i" = "$ACL_NUM" ]; then
 	    break;
 	fi
    done
 fi

 GET_WLAN_AUTH_TYPE=`cat $CONFIG_DIR/auth_type`
 AUTH_TYPE=$GET_WLAN_AUTH_TYPE
 GET_WLAN_ENCRYPT=`cat $CONFIG_DIR/encrypt`
 if [ "$GET_WLAN_AUTH_TYPE" = "1" ] && [ "$GET_WLAN_ENCRYPT" != "1" ]; then
 	# shared-key and not WEP enabled, force to open-system
 	AUTH_TYPE=0
 fi
 $SET_WLAN set_mib authtype=$AUTH_TYPE

 if [ "$GET_WLAN_ENCRYPT" = "0" ]; then
 	$SET_WLAN set_mib encmode=0
 elif [ "$GET_WLAN_ENCRYPT" = "1" ]; then
 	### WEP mode ##
 	GET_WEP=`cat $CONFIG_DIR/wep`
 	GET_WEP_KEY_TYPE=`cat $CONFIG_DIR/wep_key_type`
 	GET_WEP_KEY_ID=`cat $CONFIG_DIR/wep_default_key`
 	if [ "$GET_WEP" = "1" ]; then
 		if [ "$GET_WEP_KEY_TYPE" = "0" ]; then
 			GET_WEP_KEY_1=`cat $CONFIG_DIR/wepkey1_64_asc`
 			GET_WEP_KEY_2=`cat $CONFIG_DIR/wepkey2_64_asc`
 			GET_WEP_KEY_3=`cat $CONFIG_DIR/wepkey3_64_asc`
 			GET_WEP_KEY_4=`cat $CONFIG_DIR/wepkey4_64_asc`
 		else
 			GET_WEP_KEY_1=`cat $CONFIG_DIR/wepkey1_64_hex`
 			GET_WEP_KEY_2=`cat $CONFIG_DIR/wepkey2_64_hex`
 			GET_WEP_KEY_3=`cat $CONFIG_DIR/wepkey3_64_hex`
 			GET_WEP_KEY_4=`cat $CONFIG_DIR/wepkey4_64_hex`
 		fi

 		$SET_WLAN set_mib encmode=1
 		$SET_WLAN set_mib wepkey1=$GET_WEP_KEY_1
 		$SET_WLAN set_mib wepkey2=$GET_WEP_KEY_2
 		$SET_WLAN set_mib wepkey3=$GET_WEP_KEY_3
 		$SET_WLAN set_mib wepkey4=$GET_WEP_KEY_4
 		$SET_WLAN set_mib wepdkeyid=$GET_WEP_KEY_ID
 	else
 		if [ "$GET_WEP_KEY_TYPE" = "0" ]; then
 			GET_WEP_KEY_1=`cat $CONFIG_DIR/wepkey1_128_asc`
 			GET_WEP_KEY_2=`cat $CONFIG_DIR/wepkey2_128_asc`
 			GET_WEP_KEY_3=`cat $CONFIG_DIR/wepkey3_128_asc`
 			GET_WEP_KEY_4=`cat $CONFIG_DIR/wepkey4_128_asc`
 		else
 			GET_WEP_KEY_1=`cat $CONFIG_DIR/wepkey1_128_hex`
 			GET_WEP_KEY_2=`cat $CONFIG_DIR/wepkey2_128_hex`
 			GET_WEP_KEY_3=`cat $CONFIG_DIR/wepkey3_128_hex`
 			GET_WEP_KEY_4=`cat $CONFIG_DIR/wepkey4_128_hex`
 		fi
 		$SET_WLAN set_mib encmode=5
 		$SET_WLAN set_mib wepkey1=$GET_WEP_KEY_1
 		$SET_WLAN set_mib wepkey2=$GET_WEP_KEY_2
 		$SET_WLAN set_mib wepkey3=$GET_WEP_KEY_3
 		$SET_WLAN set_mib wepkey4=$GET_WEP_KEY_4
 		$SET_WLAN set_mib wepdkeyid=$GET_WEP_KEY_ID
 	fi
 else
         ## WPA mode ##
 	$SET_WLAN set_mib encmode=2
 fi
 ##$SET_WLAN set_mib wds_enable=0
 ##$SET_WLAN set_mib wds_encrypt=0

 ## Set 802.1x flag ##
 _ENABLE_1X=0
 if [ $GET_WLAN_ENCRYPT -lt 2 ]; then
 	GET_ENABLE_1X=`cat $CONFIG_DIR/enable_1x`
 	GET_MAC_AUTH_ENABLED=`cat $CONFIG_DIR/mac_auth_enabled`
 	if [ "$GET_ENABLE_1X" != 0 ] || [ "$GET_MAC_AUTH_ENABLED" != 0 ]; then
 		_ENABLE_1X=1
 	fi
 else
 	_ENABLE_1X=1
 fi
 $SET_WLAN set_mib 802_1x=$_ENABLE_1X


 #set band
 GET_BAND=`cat $ROOT_CONFIG_DIR/band`
 GET_WIFI_SPECIFIC=`cat $ROOT_CONFIG_DIR/wifi_specific`
 if [ "$GET_VALUE_WLAN_MODE" != '1' ] && [ "$GET_WIFI_SPECIFIC" = 1 ] &&  [ "$GET_BAND" = '2' ] ; then
 	GET_BAND=3
 fi
 if [ "$GET_BAND" = '8' ]; then
 	GET_BAND=11
 	$SET_WLAN set_mib deny_legacy=3
 elif [ "$GET_BAND" = '2' ]; then
 	GET_BAND=3
 	$SET_WLAN set_mib deny_legacy=1
 elif [ "$GET_BAND" = '10' ]; then
 	GET_BAND=11
 	$SET_WLAN set_mib deny_legacy=1
 else
 	$SET_WLAN set_mib deny_legacy=0
 fi
 $SET_WLAN set_mib band=$GET_BAND

 ###Set 11n parameter
 if [ $IS_ROOT_WLAN = 1 ]; then
 if [ $GET_BAND = 10 ] || [ $GET_BAND = 11 ] || [ $GET_BAND = 76 ] ; then
 	GET_CHANNEL_BONDING=`cat $CONFIG_DIR/channel_bonding`
 	$SET_WLAN set_mib use40M=$GET_CHANNEL_BONDING

 	GET_CONTROL_SIDEBAND=`cat $CONFIG_DIR/control_sideband`

 	if [ "$GET_CHANNEL_BONDING" = 0 ]; then
 	$SET_WLAN set_mib 2ndchoffset=0
 	else
 		if [ "$GET_CONTROL_SIDEBAND" = 0 ]; then
 			 $SET_WLAN set_mib 2ndchoffset=1
 		fi
 		if [ "$GET_CONTROL_SIDEBAND" = 1 ]; then
 			 $SET_WLAN set_mib 2ndchoffset=2
 		fi
 	fi

 	GET_SHORT_GI=`cat $CONFIG_DIR/short_gi`
 	$SET_WLAN set_mib shortGI20M=$GET_SHORT_GI
 	$SET_WLAN set_mib shortGI40M=$GET_SHORT_GI

 	if [ $GET_BAND = 76 ] ; then
 		$SET_WLAN set_mib shortGI80M=$GET_SHORT_GI
 	fi
 	GET_AGGREGATION=`cat $CONFIG_DIR/aggregation`

 	if [ "$GET_AGGREGATION" = 0 ]; then
 		$SET_WLAN set_mib ampdu=$GET_AGGREGATION
 		$SET_WLAN set_mib amsdu=$GET_AGGREGATION
 	elif [ "$GET_AGGREGATION" = 1 ]; then
 		$SET_WLAN set_mib ampdu=1
 		$SET_WLAN set_mib amsdu=0
 	elif [ "$GET_AGGREGATION" = 2 ]; then
 		$SET_WLAN set_mib ampdu=0
 		$SET_WLAN set_mib amsdu=1
 	elif [ "$GET_AGGREGATION" = 3 ]; then
 		$SET_WLAN set_mib ampdu=1
 		$SET_WLAN set_mib amsdu=1
 	fi

 	GET_STBC_ENABLED=`cat $CONFIG_DIR/stbc_enabled`
 	$SET_WLAN set_mib stbc=$GET_STBC_ENABLED
 	GET_COEXIST_ENABLED=`cat $CONFIG_DIR/coexist_enabled`
 	$SET_WLAN set_mib coexist=$GET_COEXIST_ENABLED
 fi # [ $GET_BAND = 10 ] || [ $GET_BAND = 11 ]
 fi # [ $IS_ROOT_WLAN = 1 ]
 ##########

 #set nat2.5 disable when client and mac clone is set
 GET_MACCLONE_ENABLED=`cat $CONFIG_DIR/macclone_enable`
 if [ "$GET_MACCLONE_ENABLED" = '1' -a "$GET_VALUE_WLAN_MODE" = '1' ]; then
 	$SET_WLAN set_mib nat25_disable=1
 	$SET_WLAN set_mib macclone_enable=1
 else
 	$SET_WLAN set_mib nat25_disable=0
 	$SET_WLAN set_mib macclone_enable=0
 fi

 # set 11g protection mode
 GET_PROTECTION_DISABLED=`cat $CONFIG_DIR/protection_disabled`
 if  [ "$GET_PROTECTION_DISABLED" = '1' ] ;then
 	$SET_WLAN set_mib disable_protection=1
 else
 	$SET_WLAN set_mib disable_protection=0
 fi

 # set block relay
 GET_BLOCK_RELAY=`cat $CONFIG_DIR/block_relay`
 $SET_WLAN set_mib block_relay=$GET_BLOCK_RELAY

 # set WiFi specific mode
 GET_WIFI_SPECIFIC=`cat $ROOT_CONFIG_DIR/wifi_specific`
 $SET_WLAN set_mib wifi_specific=$GET_WIFI_SPECIFIC

 # for WMM
 GET_WMM_ENABLED=`cat $CONFIG_DIR/wmm_enabled`
 $SET_WLAN set_mib qos_enable=$GET_WMM_ENABLED

 # for guest access
 GET_ACCESS=`cat $CONFIG_DIR/guest_access`
 $SET_WLAN set_mib guest_access=$GET_ACCESS


 #
 # following settings is used when driver WPA module is included
 #

 GET_WPA_AUTH=`cat $CONFIG_DIR/wpa_auth`
 #if [ $GET_VALUE_WLAN_MODE != 1 ] && [ $GET_WLAN_ENCRYPT -ge 2 ]  && [ $GET_WLAN_ENCRYPT -lt 7 ] && [ $GET_WPA_AUTH = 2 ]; then
 if [ $GET_WLAN_ENCRYPT -ge 2 ]  && [ $GET_WLAN_ENCRYPT -lt 11 ] && [ $GET_WPA_AUTH = 2 ]; then
 	if [ $GET_WLAN_ENCRYPT = 2 ]; then
 		ENABLE=1
 	elif [ $GET_WLAN_ENCRYPT = 4 ]; then
 		ENABLE=2
 	elif [ $GET_WLAN_ENCRYPT = 6 ]; then
 		ENABLE=3
 	elif [ $GET_WLAN_ENCRYPT = 8 ]; then
 		ENABLE=8
 	elif [ $GET_WLAN_ENCRYPT = 10 ]; then
 		ENABLE=10
 	else
 		echo "invalid ENCRYPT value!"; exit
 	fi
 	$SET_WLAN set_mib psk_enable=$ENABLE

 	if [ $GET_WLAN_ENCRYPT = 2 ] || [ $GET_WLAN_ENCRYPT = 6 ] || [ $GET_WLAN_ENCRYPT = 8 ] || [ $GET_WLAN_ENCRYPT = 10 ]; then
 		GET_WPA_CIPHER_SUITE=`cat $CONFIG_DIR/wpa_cipher`
 		if [ $GET_WPA_CIPHER_SUITE = 1 ]; then
 			CIPHER=2
 		elif [ $GET_WPA_CIPHER_SUITE = 2 ]; then
 			CIPHER=8
 		elif [ $GET_WPA_CIPHER_SUITE = 3 ]; then
 			CIPHER=10
 		elif [ $GET_WPA_CIPHER_SUITE = 0 ]; then
 			CIPHER=0
 		else
 			echo "invalid WPA_CIPHER_SUITE value!"; exit 1
 		fi
 	fi
 	$SET_WLAN set_mib wpa_cipher=$CIPHER

 	if [ $GET_WLAN_ENCRYPT = 4 ] || [ $GET_WLAN_ENCRYPT = 6 ] || [ $GET_WLAN_ENCRYPT = 8 ] || [ $GET_WLAN_ENCRYPT = 10 ]; then
 		GET_WPA2_CIPHER_SUITE=`cat $CONFIG_DIR/wpa2_cipher`
 		if [ $GET_WPA2_CIPHER_SUITE = 1 ]; then
 			CIPHER=2
 		elif [ $GET_WPA2_CIPHER_SUITE = 2 ]; then
 			CIPHER=8
 		elif [ $GET_WPA2_CIPHER_SUITE = 3 ]; then
 			CIPHER=10
 		elif [ $GET_WPA2_CIPHER_SUITE = 8 ]; then
 			CIPHER=8
 		else
 			echo "invalid WPA2_CIPHER_SUITE value!"; exit 1
 		fi
 	fi

 	if [ $GET_WLAN_ENCRYPT = 8 ] || [ $GET_WLAN_ENCRYPT = 10 ]; then
 		if [ $GET_WLAN_ENCRYPT = 8 ]; then
 			$SET_WLAN set_mib dot11IEEE80211W=2
 		else
 			$SET_WLAN set_mib dot11IEEE80211W=1
 		fi
 		$SET_WLAN set_mib enableSHA256=1
 	fi

 	$SET_WLAN set_mib wpa2_cipher=$CIPHER

 	GET_WPA_PSK=`cat $CONFIG_DIR/wpa_psk`
 	$SET_WLAN set_mib passphrase=$GET_WPA_PSK


 	GET_WPA_GROUP_REKEY_TIME=`cat $CONFIG_DIR/gk_rekey`
 	$SET_WLAN set_mib gk_rekey=$GET_WPA_GROUP_REKEY_TIME
 else
 	$SET_WLAN set_mib psk_enable=0
 fi
	#!/bin/sh
	#
	# script file to start WLAN
	#
	if [ $# -lt 3 ]; then echo "Usage: $0 wlan root type"; exit 1 ; fi

	#echo "my: [$1] [$2] [$3]"

	if [ "$1" == "wlan0" ]; then
	CONFIG_ROOT_DIR="/var/rtl8192c"
	elif [ "$1" == "wlan1" ]; then
	CONFIG_ROOT_DIR="/var/rtl8192cd"
	else
	echo "--interface is not right $1"
	fi
	CONFIG_DIR=$CONFIG_ROOT_DIR/$1

	if [ -z "$SCRIPT_DIR" ]; then
	SCRIPT_DIR=`cat $CONFIG_ROOT_DIR/wifi_script_dir`
	fi
	START_WLAN_APP=$SCRIPT_DIR/wlanapp_8192c.sh

	#if [ -z "$ROOT_WLAN" ]; then
	# ROOT_WLAN=`echo $1 \| cut -b -5`
	#fi

	OP_INTF=$1
	ROOT_WLAN=$2
	EXT=$3

	ROOT_CONFIG_DIR=$CONFIG_ROOT_DIR/$ROOT_WLAN

	SET_WLAN="iwpriv $1"
	SET_WLAN_PARAM="$SET_WLAN set_mib"
	IFCONFIG=ifconfig

	## Disable WLAN MAC driver and shutdown interface first ##
	$IFCONFIG $OP_INTF down

	GET_VALUE=
	GET_VALUE_TMP=
	GET_VALUE_WLAN_DISABLED=`cat $CONFIG_DIR/wlan_disabled`
	GET_VALUE_WLAN_MODE=`cat $CONFIG_DIR/wlan_mode`

	##$SET_WLAN set_mib vap_enable=0

	## kill wlan application daemon ##

	##$START_WLAN_APP kill $1

	## Set parameters to driver ##

	GET_VALUE=`cat $ROOT_CONFIG_DIR/reg_domain`
	$SET_WLAN set_mib regdomain=$GET_VALUE

	#EXT=`echo $1 \| cut -b 7-8`
	NUM=0
	if [ "$EXT" = "va" ] ; then
	NUM=${1#w*va};
	NUM=$((NUM +1))
	# NUM=`echo $1 \| cut -b 9`
	# NUM=`expr $NUM + 1`
	fi

	GET_VALUE=`cat $ROOT_CONFIG_DIR/wlan${NUM}_addr`
	$IFCONFIG $OP_INTF hw ether $GET_VALUE

	IS_ROOT_WLAN=0;
	if [ "$EXT" = "root" ] ; then
	IS_ROOT_WLAN=1;
	fi

	if [ "$GET_VALUE_WLAN_MODE" = '1' ]; then
	## client mode
	GET_VALUE=`cat $CONFIG_DIR/network_type`
	if [ "$GET_VALUE" = '0' ]; then
	$SET_WLAN set_mib opmode=8
	else
	$SET_WLAN set_mib opmode=32
	GET_VALUE_TMP=`cat $CONFIG_DIR/default_ssid`
	$SET_WLAN set_mib defssid="$GET_VALUE_TMP"
	fi
	else
	## AP mode
	$SET_WLAN set_mib opmode=16
	fi
	##$IFCONFIG $OP_INTF hw ether $WLAN_MAC_ADDR

	##if [ "$GET_VALUE_WLAN_MODE" = '2' ]; then
	## $SET_WLAN set_mib wds_pure=1
	##else
	## $SET_WLAN set_mib wds_pure=0
	##fi

	# set RF parameters
	if [ $IS_ROOT_WLAN = 1 ]; then
	GET_VALUE=`cat $CONFIG_DIR/channel`
	$SET_WLAN set_mib channel=$GET_VALUE

	GET_VALUE=`cat $CONFIG_DIR/ch_hi`
	$SET_WLAN set_mib ch_hi=$GET_VALUE

	GET_VALUE=`cat $CONFIG_DIR/ch_low`
	$SET_WLAN set_mib ch_low=$GET_VALUE

	GET_VALUE=`cat $CONFIG_DIR/led_type`
	$SET_WLAN set_mib led_type=$GET_VALUE

	GET_VALUE=`cat $CONFIG_DIR/MIMO_TR_mode`
	$SET_WLAN set_mib MIMO_TR_mode=$GET_VALUE

	GET_TX_POWER_CCK_A=`cat $CONFIG_DIR/tx_power_cck_a`
	GET_TX_POWER_CCK_B=`cat $CONFIG_DIR/tx_power_cck_b`
	GET_TX_POWER_HT40_1S_A=`cat $CONFIG_DIR/tx_power_ht40_1s_a`
	GET_TX_POWER_HT40_1S_B=`cat $CONFIG_DIR/tx_power_ht40_1s_b`

	GET_TX_POWER_DIFF_HT40_2S=`cat $CONFIG_DIR/tx_power_diff_ht40_2s`
	GET_TX_POWER_DIFF_HT20=`cat $CONFIG_DIR/tx_power_diff_ht20`
	GET_TX_POWER_DIFF_OFDM=`cat $CONFIG_DIR/tx_power_diff_ofdm`

	$SET_WLAN set_mib pwrlevelCCK_A=$GET_TX_POWER_CCK_A
	$SET_WLAN set_mib pwrlevelCCK_B=$GET_TX_POWER_CCK_B
	$SET_WLAN set_mib pwrlevelHT40_1S_A=$GET_TX_POWER_HT40_1S_A
	$SET_WLAN set_mib pwrlevelHT40_1S_B=$GET_TX_POWER_HT40_1S_B
	$SET_WLAN set_mib pwrdiffHT40_2S=$GET_TX_POWER_DIFF_HT40_2S
	$SET_WLAN set_mib pwrdiffHT20=$GET_TX_POWER_DIFF_HT20
	$SET_WLAN set_mib pwrdiffOFDM=$GET_TX_POWER_DIFF_OFDM

	GET_11N_TSSI1=`cat $CONFIG_DIR/tssi_1`
	$SET_WLAN set_mib tssi1=$GET_11N_TSSI1
	GET_11N_TSSI2=`cat $CONFIG_DIR/tssi_2`
	$SET_WLAN set_mib tssi2=$GET_11N_TSSI2

	GET_VALUE=`cat $CONFIG_DIR/11n_ther`
	$SET_WLAN set_mib ther=$GET_VALUE

	GET_VALUE=`cat $CONFIG_DIR/trswitch`
	$SET_WLAN set_mib trswitch=$GET_VALUE

	GET_VALUE=`cat $CONFIG_DIR/11n_xcap`
	$SET_WLAN set_mib xcap=$GET_VALUE

	GET_VALUE=`cat $ROOT_CONFIG_DIR/beacon_interval`
	$SET_WLAN set_mib bcnint=$GET_VALUE

	GET_VALUE=`cat $CONFIG_DIR/dtim_period`
	$SET_WLAN set_mib dtimperiod=$GET_VALUE
	fi # [ $IS_ROOT_WLAN = 1 ]

	GET_VALUE=`cat $CONFIG_DIR/basic_rates`
	$SET_WLAN set_mib basicrates=$GET_VALUE

	GET_VALUE=`cat $CONFIG_DIR/supported_rate`
	$SET_WLAN set_mib oprates=$GET_VALUE

	GET_RATE_ADAPTIVE_VALUE=`cat $CONFIG_DIR/rate_adaptive_enabled`
	if [ "$GET_RATE_ADAPTIVE_VALUE" = '0' ]; then
	$SET_WLAN set_mib autorate=0
	GET_FIX_RATE_VALUE=`cat $CONFIG_DIR/fix_rate`
	$SET_WLAN set_mib fixrate=$GET_FIX_RATE_VALUE
	else
	$SET_WLAN set_mib autorate=1
	fi

	GET_VALUE=`cat $CONFIG_DIR/rts_threshold`
	$SET_WLAN set_mib rtsthres=$GET_VALUE

	GET_VALUE=`cat $CONFIG_DIR/frag_threshold`
	$SET_WLAN set_mib fragthres=$GET_VALUE

	GET_VALUE=`cat $CONFIG_DIR/inactivity_time`
	$SET_WLAN set_mib expired_time=$GET_VALUE

	GET_VALUE=`cat $CONFIG_DIR/preamble_type`
	$SET_WLAN set_mib preamble=$GET_VALUE


	GET_VALUE=`cat $CONFIG_DIR/hidden_ssid`
	$SET_WLAN set_mib hiddenAP=$GET_VALUE


	if [ "$OP_INTF" = "$ROOT_WLAN-vxd" ]; then
	GET_VALUE=`cat $CONFIG_ROOT_DIR/repeater_ssid`
	else
	GET_VALUE=`cat $CONFIG_DIR/ssid`
	fi
	$SET_WLAN set_mib ssid=$GET_VALUE

	GET_VALUE=`cat $CONFIG_DIR/macac_enabled`
	$SET_WLAN set_mib aclmode=$GET_VALUE
	$SET_WLAN set_mib aclnum=0

	ACL_NUM=`cat $CONFIG_DIR/macac_num`
	ITEM="1 2 3 4 5 6 7 8 9 10"
	#for (( i=1; i<=$ACL_NUM; i=i+1 ))
	if [ "0" != "$ACL_NUM" ]; then
	for i in $ITEM
	do
	#echo "acl $i"
	GET_VALUE=`cat $CONFIG_DIR/macac_addr$i`
	$SET_WLAN set_mib acladdr=$GET_VALUE
	if [ "$i" = "$ACL_NUM" ]; then
	break;
	fi
	done
	fi

	GET_WLAN_AUTH_TYPE=`cat $CONFIG_DIR/auth_type`
	AUTH_TYPE=$GET_WLAN_AUTH_TYPE
	GET_WLAN_ENCRYPT=`cat $CONFIG_DIR/encrypt`
	if [ "$GET_WLAN_AUTH_TYPE" = "1" ] && [ "$GET_WLAN_ENCRYPT" != "1" ]; then
	# shared-key and not WEP enabled, force to open-system
	AUTH_TYPE=0
	fi
	$SET_WLAN set_mib authtype=$AUTH_TYPE

	if [ "$GET_WLAN_ENCRYPT" = "0" ]; then
	$SET_WLAN set_mib encmode=0
	elif [ "$GET_WLAN_ENCRYPT" = "1" ]; then
	### WEP mode ##
	GET_WEP=`cat $CONFIG_DIR/wep`
	GET_WEP_KEY_TYPE=`cat $CONFIG_DIR/wep_key_type`
	GET_WEP_KEY_ID=`cat $CONFIG_DIR/wep_default_key`
	if [ "$GET_WEP" = "1" ]; then
	if [ "$GET_WEP_KEY_TYPE" = "0" ]; then
	GET_WEP_KEY_1=`cat $CONFIG_DIR/wepkey1_64_asc`
	GET_WEP_KEY_2=`cat $CONFIG_DIR/wepkey2_64_asc`
	GET_WEP_KEY_3=`cat $CONFIG_DIR/wepkey3_64_asc`
	GET_WEP_KEY_4=`cat $CONFIG_DIR/wepkey4_64_asc`
	else
	GET_WEP_KEY_1=`cat $CONFIG_DIR/wepkey1_64_hex`
	GET_WEP_KEY_2=`cat $CONFIG_DIR/wepkey2_64_hex`
	GET_WEP_KEY_3=`cat $CONFIG_DIR/wepkey3_64_hex`
	GET_WEP_KEY_4=`cat $CONFIG_DIR/wepkey4_64_hex`
	fi

	$SET_WLAN set_mib encmode=1
	$SET_WLAN set_mib wepkey1=$GET_WEP_KEY_1
	$SET_WLAN set_mib wepkey2=$GET_WEP_KEY_2
	$SET_WLAN set_mib wepkey3=$GET_WEP_KEY_3
	$SET_WLAN set_mib wepkey4=$GET_WEP_KEY_4
	$SET_WLAN set_mib wepdkeyid=$GET_WEP_KEY_ID
	else
	if [ "$GET_WEP_KEY_TYPE" = "0" ]; then
	GET_WEP_KEY_1=`cat $CONFIG_DIR/wepkey1_128_asc`
	GET_WEP_KEY_2=`cat $CONFIG_DIR/wepkey2_128_asc`
	GET_WEP_KEY_3=`cat $CONFIG_DIR/wepkey3_128_asc`
	GET_WEP_KEY_4=`cat $CONFIG_DIR/wepkey4_128_asc`
	else
	GET_WEP_KEY_1=`cat $CONFIG_DIR/wepkey1_128_hex`
	GET_WEP_KEY_2=`cat $CONFIG_DIR/wepkey2_128_hex`
	GET_WEP_KEY_3=`cat $CONFIG_DIR/wepkey3_128_hex`
	GET_WEP_KEY_4=`cat $CONFIG_DIR/wepkey4_128_hex`
	fi
	$SET_WLAN set_mib encmode=5
	$SET_WLAN set_mib wepkey1=$GET_WEP_KEY_1
	$SET_WLAN set_mib wepkey2=$GET_WEP_KEY_2
	$SET_WLAN set_mib wepkey3=$GET_WEP_KEY_3
	$SET_WLAN set_mib wepkey4=$GET_WEP_KEY_4
	$SET_WLAN set_mib wepdkeyid=$GET_WEP_KEY_ID
	fi
	else
	## WPA mode ##
	$SET_WLAN set_mib encmode=2
	fi
	##$SET_WLAN set_mib wds_enable=0
	##$SET_WLAN set_mib wds_encrypt=0

	## Set 802.1x flag ##
	_ENABLE_1X=0
	if [ $GET_WLAN_ENCRYPT -lt 2 ]; then
	GET_ENABLE_1X=`cat $CONFIG_DIR/enable_1x`
	GET_MAC_AUTH_ENABLED=`cat $CONFIG_DIR/mac_auth_enabled`
	if [ "$GET_ENABLE_1X" != 0 ] \|\| [ "$GET_MAC_AUTH_ENABLED" != 0 ]; then
	_ENABLE_1X=1
	fi
	else
	_ENABLE_1X=1
	fi
	$SET_WLAN set_mib 802_1x=$_ENABLE_1X


	#set band
	GET_BAND=`cat $ROOT_CONFIG_DIR/band`
	GET_WIFI_SPECIFIC=`cat $ROOT_CONFIG_DIR/wifi_specific`
	if [ "$GET_VALUE_WLAN_MODE" != '1' ] && [ "$GET_WIFI_SPECIFIC" = 1 ] && [ "$GET_BAND" = '2' ] ; then
	GET_BAND=3
	fi
	if [ "$GET_BAND" = '8' ]; then
	GET_BAND=11
	$SET_WLAN set_mib deny_legacy=3
	elif [ "$GET_BAND" = '2' ]; then
	GET_BAND=3
	$SET_WLAN set_mib deny_legacy=1
	elif [ "$GET_BAND" = '10' ]; then
	GET_BAND=11
	$SET_WLAN set_mib deny_legacy=1
	else
	$SET_WLAN set_mib deny_legacy=0
	fi
	$SET_WLAN set_mib band=$GET_BAND

	###Set 11n parameter
	if [ $IS_ROOT_WLAN = 1 ]; then
	if [ $GET_BAND = 10 ] \|\| [ $GET_BAND = 11 ] \|\| [ $GET_BAND = 76 ] ; then
	GET_CHANNEL_BONDING=`cat $CONFIG_DIR/channel_bonding`
	$SET_WLAN set_mib use40M=$GET_CHANNEL_BONDING

	GET_CONTROL_SIDEBAND=`cat $CONFIG_DIR/control_sideband`

	if [ "$GET_CHANNEL_BONDING" = 0 ]; then
	$SET_WLAN set_mib 2ndchoffset=0
	else
	if [ "$GET_CONTROL_SIDEBAND" = 0 ]; then
	$SET_WLAN set_mib 2ndchoffset=1
	fi
	if [ "$GET_CONTROL_SIDEBAND" = 1 ]; then
	$SET_WLAN set_mib 2ndchoffset=2
	fi
	fi

	GET_SHORT_GI=`cat $CONFIG_DIR/short_gi`
	$SET_WLAN set_mib shortGI20M=$GET_SHORT_GI
	$SET_WLAN set_mib shortGI40M=$GET_SHORT_GI

	if [ $GET_BAND = 76 ] ; then
	$SET_WLAN set_mib shortGI80M=$GET_SHORT_GI
	fi
	GET_AGGREGATION=`cat $CONFIG_DIR/aggregation`

	if [ "$GET_AGGREGATION" = 0 ]; then
	$SET_WLAN set_mib ampdu=$GET_AGGREGATION
	$SET_WLAN set_mib amsdu=$GET_AGGREGATION
	elif [ "$GET_AGGREGATION" = 1 ]; then
	$SET_WLAN set_mib ampdu=1
	$SET_WLAN set_mib amsdu=0
	elif [ "$GET_AGGREGATION" = 2 ]; then
	$SET_WLAN set_mib ampdu=0
	$SET_WLAN set_mib amsdu=1
	elif [ "$GET_AGGREGATION" = 3 ]; then
	$SET_WLAN set_mib ampdu=1
	$SET_WLAN set_mib amsdu=1
	fi

	GET_STBC_ENABLED=`cat $CONFIG_DIR/stbc_enabled`
	$SET_WLAN set_mib stbc=$GET_STBC_ENABLED
	GET_COEXIST_ENABLED=`cat $CONFIG_DIR/coexist_enabled`
	$SET_WLAN set_mib coexist=$GET_COEXIST_ENABLED
	fi # [ $GET_BAND = 10 ] \|\| [ $GET_BAND = 11 ]
	fi # [ $IS_ROOT_WLAN = 1 ]
	##########

	#set nat2.5 disable when client and mac clone is set
	GET_MACCLONE_ENABLED=`cat $CONFIG_DIR/macclone_enable`
	if [ "$GET_MACCLONE_ENABLED" = '1' -a "$GET_VALUE_WLAN_MODE" = '1' ]; then
	$SET_WLAN set_mib nat25_disable=1
	$SET_WLAN set_mib macclone_enable=1
	else
	$SET_WLAN set_mib nat25_disable=0
	$SET_WLAN set_mib macclone_enable=0
	fi

	# set 11g protection mode
	GET_PROTECTION_DISABLED=`cat $CONFIG_DIR/protection_disabled`
	if [ "$GET_PROTECTION_DISABLED" = '1' ] ;then
	$SET_WLAN set_mib disable_protection=1
	else
	$SET_WLAN set_mib disable_protection=0
	fi

	# set block relay
	GET_BLOCK_RELAY=`cat $CONFIG_DIR/block_relay`
	$SET_WLAN set_mib block_relay=$GET_BLOCK_RELAY

	# set WiFi specific mode
	GET_WIFI_SPECIFIC=`cat $ROOT_CONFIG_DIR/wifi_specific`
	$SET_WLAN set_mib wifi_specific=$GET_WIFI_SPECIFIC

	# for WMM
	GET_WMM_ENABLED=`cat $CONFIG_DIR/wmm_enabled`
	$SET_WLAN set_mib qos_enable=$GET_WMM_ENABLED

	# for guest access
	GET_ACCESS=`cat $CONFIG_DIR/guest_access`
	$SET_WLAN set_mib guest_access=$GET_ACCESS


	#
	# following settings is used when driver WPA module is included
	#

	GET_WPA_AUTH=`cat $CONFIG_DIR/wpa_auth`
	#if [ $GET_VALUE_WLAN_MODE != 1 ] && [ $GET_WLAN_ENCRYPT -ge 2 ] && [ $GET_WLAN_ENCRYPT -lt 7 ] && [ $GET_WPA_AUTH = 2 ]; then
	if [ $GET_WLAN_ENCRYPT -ge 2 ] && [ $GET_WLAN_ENCRYPT -lt 11 ] && [ $GET_WPA_AUTH = 2 ]; then
	if [ $GET_WLAN_ENCRYPT = 2 ]; then
	ENABLE=1
	elif [ $GET_WLAN_ENCRYPT = 4 ]; then
	ENABLE=2
	elif [ $GET_WLAN_ENCRYPT = 6 ]; then
	ENABLE=3
	elif [ $GET_WLAN_ENCRYPT = 8 ]; then
	ENABLE=8
	elif [ $GET_WLAN_ENCRYPT = 10 ]; then
	ENABLE=10
	else
	echo "invalid ENCRYPT value!"; exit
	fi
	$SET_WLAN set_mib psk_enable=$ENABLE

	if [ $GET_WLAN_ENCRYPT = 2 ] \|\| [ $GET_WLAN_ENCRYPT = 6 ] \|\| [ $GET_WLAN_ENCRYPT = 8 ] \|\| [ $GET_WLAN_ENCRYPT = 10 ]; then
	GET_WPA_CIPHER_SUITE=`cat $CONFIG_DIR/wpa_cipher`
	if [ $GET_WPA_CIPHER_SUITE = 1 ]; then
	CIPHER=2
	elif [ $GET_WPA_CIPHER_SUITE = 2 ]; then
	CIPHER=8
	elif [ $GET_WPA_CIPHER_SUITE = 3 ]; then
	CIPHER=10
	elif [ $GET_WPA_CIPHER_SUITE = 0 ]; then
	CIPHER=0
	else
	echo "invalid WPA_CIPHER_SUITE value!"; exit 1
	fi
	fi
	$SET_WLAN set_mib wpa_cipher=$CIPHER

	if [ $GET_WLAN_ENCRYPT = 4 ] \|\| [ $GET_WLAN_ENCRYPT = 6 ] \|\| [ $GET_WLAN_ENCRYPT = 8 ] \|\| [ $GET_WLAN_ENCRYPT = 10 ]; then
	GET_WPA2_CIPHER_SUITE=`cat $CONFIG_DIR/wpa2_cipher`
	if [ $GET_WPA2_CIPHER_SUITE = 1 ]; then
	CIPHER=2
	elif [ $GET_WPA2_CIPHER_SUITE = 2 ]; then
	CIPHER=8
	elif [ $GET_WPA2_CIPHER_SUITE = 3 ]; then
	CIPHER=10
	elif [ $GET_WPA2_CIPHER_SUITE = 8 ]; then
	CIPHER=8
	else
	echo "invalid WPA2_CIPHER_SUITE value!"; exit 1
	fi
	fi

	if [ $GET_WLAN_ENCRYPT = 8 ] \|\| [ $GET_WLAN_ENCRYPT = 10 ]; then
	if [ $GET_WLAN_ENCRYPT = 8 ]; then
	$SET_WLAN set_mib dot11IEEE80211W=2
	else
	$SET_WLAN set_mib dot11IEEE80211W=1
	fi
	$SET_WLAN set_mib enableSHA256=1
	fi

	$SET_WLAN set_mib wpa2_cipher=$CIPHER

	GET_WPA_PSK=`cat $CONFIG_DIR/wpa_psk`
	$SET_WLAN set_mib passphrase=$GET_WPA_PSK


	GET_WPA_GROUP_REKEY_TIME=`cat $CONFIG_DIR/gk_rekey`
	$SET_WLAN set_mib gk_rekey=$GET_WPA_GROUP_REKEY_TIME
	else
	$SET_WLAN set_mib psk_enable=0
	fi