| From 05ba3df09751ff516de5d862c98f5a979b51bb56 Mon Sep 17 00:00:00 2001 |
| From: Dave Stevenson <dave.stevenson@raspberrypi.com> |
| Date: Thu, 25 Jun 2020 16:52:14 +0100 |
| Subject: [PATCH] media: dt-bindings: media: i2c: Add mono version to |
| IMX290 bindings |
| |
| The IMX290 module is available as either monochrome or colour and |
| the variant is not detectable at runtime. |
| |
| Add a new compatible string for the monochrome version. |
| |
| Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> |
| --- |
| Documentation/devicetree/bindings/media/i2c/imx290.txt | 7 ++++--- |
| 1 file changed, 4 insertions(+), 3 deletions(-) |
| |
| --- a/Documentation/devicetree/bindings/media/i2c/imx290.txt |
| +++ b/Documentation/devicetree/bindings/media/i2c/imx290.txt |
| @@ -1,13 +1,14 @@ |
| * Sony IMX290 1/2.8-Inch CMOS Image Sensor |
| |
| The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with |
| -Square Pixel for Color Cameras. It is programmable through I2C and 4-wire |
| -interfaces. The sensor output is available via CMOS logic parallel SDR output, |
| +Square Pixel for Color or Monochrome Cameras. It is programmable through I2C |
| +and 4-wire interfaces. |
| +The sensor output is available via CMOS logic parallel SDR output, |
| Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the |
| default. No bindings have been defined for the other busses. |
| |
| Required Properties: |
| -- compatible: Should be "sony,imx290" |
| +- compatible: Should be "sony,imx290", or "sony,imx290-mono" |
| - reg: I2C bus address of the device |
| - clocks: Reference to the xclk clock. |
| - clock-names: Should be "xclk". |