| From 3bcae3396e986b4ab97a69e8de517e32f9691a4b Mon Sep 17 00:00:00 2001 |
| From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> |
| Date: Mon, 18 Jul 2022 15:21:00 +0200 |
| Subject: [PATCH] arm64: dts: broadcom: bcm4908: add Asus GT-AC5300 LEDs |
| MIME-Version: 1.0 |
| Content-Type: text/plain; charset=UTF-8 |
| Content-Transfer-Encoding: 8bit |
| |
| There are 5 software-controllable LEDs on PCB. |
| |
| Signed-off-by: Rafał Miłecki <rafal@milecki.pl> |
| Link: https://lore.kernel.org/r/20220718132100.13277-3-zajec5@gmail.com |
| Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> |
| --- |
| .../bcm4908/bcm4908-asus-gt-ac5300.dts | 48 +++++++++++++++++++ |
| 1 file changed, 48 insertions(+) |
| |
| --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts |
| +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts |
| @@ -2,6 +2,7 @@ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| +#include <dt-bindings/leds/common.h> |
| |
| #include "bcm4908.dtsi" |
| |
| @@ -118,6 +119,53 @@ |
| }; |
| }; |
| |
| +&leds { |
| + led-power@11 { |
| + reg = <0x11>; |
| + function = LED_FUNCTION_POWER; |
| + color = <LED_COLOR_ID_WHITE>; |
| + default-state = "on"; |
| + active-low; |
| + pinctrl-names = "default"; |
| + pinctrl-0 = <&pins_led_17_a>; |
| + }; |
| + |
| + led-wan-red@12 { |
| + reg = <0x12>; |
| + function = LED_FUNCTION_WAN; |
| + color = <LED_COLOR_ID_RED>; |
| + active-low; |
| + pinctrl-names = "default"; |
| + pinctrl-0 = <&pins_led_18_a>; |
| + }; |
| + |
| + led-wps@14 { |
| + reg = <0x14>; |
| + function = LED_FUNCTION_WPS; |
| + color = <LED_COLOR_ID_WHITE>; |
| + active-low; |
| + pinctrl-names = "default"; |
| + pinctrl-0 = <&pins_led_20_a>; |
| + }; |
| + |
| + led-wan-white@15 { |
| + reg = <0x15>; |
| + function = LED_FUNCTION_WAN; |
| + color = <LED_COLOR_ID_WHITE>; |
| + active-low; |
| + pinctrl-names = "default"; |
| + pinctrl-0 = <&pins_led_21_a>; |
| + }; |
| + |
| + led-lan@19 { |
| + reg = <0x19>; |
| + function = LED_FUNCTION_LAN; |
| + color = <LED_COLOR_ID_WHITE>; |
| + pinctrl-names = "default"; |
| + pinctrl-0 = <&pins_led_25_a>; |
| + }; |
| +}; |
| + |
| &nandcs { |
| nand-ecc-strength = <4>; |
| nand-ecc-step-size = <512>; |