| From c7c8fa7f5b5ee9bea751fa7bdae8ff4acde8f26e Mon Sep 17 00:00:00 2001 |
| From: Jonas Gorski <jonas.gorski@gmail.com> |
| Date: Wed, 27 Jul 2016 11:36:00 +0200 |
| Subject: [PATCH 06/16] Documentation: add BCM6358 pincontroller binding |
| documentation |
| |
| Add binding documentation for the pincontrol core found in BCM6358 SoCs. |
| |
| Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> |
| --- |
| .../bindings/pinctrl/brcm,bcm6358-pinctrl.txt | 44 ++++++++++++++++++++++ |
| 1 file changed, 44 insertions(+) |
| create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.txt |
| |
| --- /dev/null |
| +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.txt |
| @@ -0,0 +1,44 @@ |
| +* Broadcom BCM6358 pin controller |
| + |
| +Required properties: |
| +- compatible: Must be "brcm,bcm6358-pinctrl". |
| +- reg: Register specifiers of dirout, dat registers. |
| +- reg-names: Must be "dirout", "dat". |
| +- brcm,gpiomode: Phandle to the shared gpiomode register. |
| +- gpio-controller: Identifies this node as a gpio-controller. |
| +- #gpio-cells: Must be <2>. |
| + |
| +Example: |
| + |
| +pinctrl: pin-controller@fffe0080 { |
| + compatible = "brcm,bcm6358-pinctrl"; |
| + reg = <0xfffe0080 0x8>, |
| + <0xfffe0088 0x8>, |
| + <0xfffe0098 0x4>; |
| + reg-names = "dirout", "dat"; |
| + brcm,gpiomode = <&gpiomode>; |
| + |
| + gpio-controller; |
| + #gpio-cells = <2>; |
| +}; |
| + |
| +gpiomode: syscon@fffe0098 { |
| + compatible = "brcm,bcm6358-gpiomode", "syscon"; |
| + reg = <0xfffe0098 0x4>; |
| + native-endian; |
| +}; |
| + |
| +Available pins/groups and functions: |
| + |
| +name pins functions |
| +----------------------------------------------------------- |
| +ebi_cs_grp 30-31 ebi_cs |
| +uart1_grp 28-31 uart1 |
| +spi_cs_grp 32-33 spi_cs |
| +async_modem_grp 12-15 async_modem |
| +legacy_led_grp 9-15 legacy_led |
| +serial_led_grp 6-7 serial_led |
| +led_grp 0-3 led |
| +utopia_grp 12-15, 22-31 utopia |
| +pwm_syn_clk_grp 8 pwm_syn_clk |
| +sys_irq_grp 5 sys_irq |