| From c9de73988a35c6c85810a992954ac568cca503e5 Mon Sep 17 00:00:00 2001 |
| From: Russell King <rmk+kernel@armlinux.org.uk> |
| Date: Wed, 2 Oct 2019 10:31:10 +0100 |
| Subject: [PATCH 648/660] net: mdio-i2c: add support for Clause 45 accesses |
| |
| Some SFP+ modules have PHYs on them just like SFP modules do, except |
| they are Clause 45 PHYs. The I2C protocol used to access them is |
| modified slightly in order to send the device address and 16-bit |
| register index. |
| |
| Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
| --- |
| drivers/net/phy/mdio-i2c.c | 28 ++++++++++++++++++++-------- |
| 1 file changed, 20 insertions(+), 8 deletions(-) |
| |
| --- a/drivers/net/phy/mdio-i2c.c |
| +++ b/drivers/net/phy/mdio-i2c.c |
| @@ -32,17 +32,24 @@ static int i2c_mii_read(struct mii_bus * |
| { |
| struct i2c_adapter *i2c = bus->priv; |
| struct i2c_msg msgs[2]; |
| - u8 data[2], dev_addr = reg; |
| + u8 addr[3], data[2], *p; |
| int bus_addr, ret; |
| |
| if (!i2c_mii_valid_phy_id(phy_id)) |
| return 0xffff; |
| |
| + p = addr; |
| + if (reg & MII_ADDR_C45) { |
| + *p++ = 0x20 | ((reg >> 16) & 31); |
| + *p++ = reg >> 8; |
| + } |
| + *p++ = reg; |
| + |
| bus_addr = i2c_mii_phy_addr(phy_id); |
| msgs[0].addr = bus_addr; |
| msgs[0].flags = 0; |
| - msgs[0].len = 1; |
| - msgs[0].buf = &dev_addr; |
| + msgs[0].len = p - addr; |
| + msgs[0].buf = addr; |
| msgs[1].addr = bus_addr; |
| msgs[1].flags = I2C_M_RD; |
| msgs[1].len = sizeof(data); |
| @@ -60,18 +67,23 @@ static int i2c_mii_write(struct mii_bus |
| struct i2c_adapter *i2c = bus->priv; |
| struct i2c_msg msg; |
| int ret; |
| - u8 data[3]; |
| + u8 data[5], *p; |
| |
| if (!i2c_mii_valid_phy_id(phy_id)) |
| return 0; |
| |
| - data[0] = reg; |
| - data[1] = val >> 8; |
| - data[2] = val; |
| + p = data; |
| + if (reg & MII_ADDR_C45) { |
| + *p++ = (reg >> 16) & 31; |
| + *p++ = reg >> 8; |
| + } |
| + *p++ = reg; |
| + *p++ = val >> 8; |
| + *p++ = val; |
| |
| msg.addr = i2c_mii_phy_addr(phy_id); |
| msg.flags = 0; |
| - msg.len = 3; |
| + msg.len = p - data; |
| msg.buf = data; |
| |
| ret = i2c_transfer(i2c, &msg, 1); |