| From 121cd10d9ec4466b09ac33986c7b4c1f8eff9363 Mon Sep 17 00:00:00 2001 |
| From: Kuldeep Singh <kuldeep.singh@nxp.com> |
| Date: Wed, 18 Dec 2019 15:09:41 +0530 |
| Subject: [PATCH] arm64: dts: ls208xa: Update qspi node properties for |
| LS2088ARDB |
| |
| LS2088ADB has one spansion flash s25fs512s of size 64M. |
| |
| Update qspi dts entry for the board using compatibles as "jedec,spi-nor" |
| to probe flash successfully. Also, align properties with other board dts |
| properties. |
| |
| Since device properties are different, so remove fsl, ls1021a-qspi. |
| ls1021a-qspi is to be used only for Big-endian verion of QSPI |
| controller. Use dt-bindings constants in interrupts instead of using |
| numbers. |
| |
| Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> |
| --- |
| arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 8 ++++---- |
| arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 6 +++--- |
| 2 files changed, 7 insertions(+), 7 deletions(-) |
| |
| --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi |
| +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi |
| @@ -110,12 +110,12 @@ |
| |
| &qspi { |
| status = "okay"; |
| - flash0: s25fs512s@0 { |
| + |
| + s25fs512s0: flash@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| - compatible = "spansion,m25p80"; |
| - m25p,fast-read; |
| - spi-max-frequency = <20000000>; |
| + compatible = "jedec,spi-nor"; |
| + spi-max-frequency = <50000000>; |
| reg = <0>; |
| }; |
| }; |
| --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi |
| +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi |
| @@ -609,16 +609,16 @@ |
| }; |
| |
| qspi: spi@20c0000 { |
| - status = "disabled"; |
| - compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi"; |
| + compatible = "fsl,ls2080a-qspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x20c0000 0x0 0x10000>, |
| <0x0 0x20000000 0x0 0x10000000>; |
| reg-names = "QuadSPI", "QuadSPI-memory"; |
| - interrupts = <0 25 0x4>; /* Level high type */ |
| + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen 4 3>, <&clockgen 4 3>; |
| clock-names = "qspi_en", "qspi"; |
| + status = "disabled"; |
| }; |
| |
| pcie1: pcie@3400000 { |