| From 1737de8045838dcf3c7713c940eb1582810a319f Mon Sep 17 00:00:00 2001 |
| From: Vladimir Oltean <vladimir.oltean@nxp.com> |
| Date: Mon, 16 Dec 2019 15:07:20 +0200 |
| Subject: [PATCH] net: mscc: ocelot: make phy_mode a member of the common |
| struct ocelot_port |
| |
| The Ocelot switchdev driver and the Felix DSA one need it for different |
| reasons. Felix (or at least the VSC9959 instantiation in NXP LS1028A) is |
| integrated with the traditional NXP Layerscape PCS design which does not |
| support runtime configuration of SerDes protocol. So it needs to |
| pre-validate the phy-mode from the device tree and prevent PHYLINK from |
| attempting to change it. For this, it needs to cache it in a private |
| variable. |
| |
| Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> |
| --- |
| drivers/net/ethernet/mscc/ocelot.c | 7 ++++--- |
| drivers/net/ethernet/mscc/ocelot.h | 1 - |
| drivers/net/ethernet/mscc/ocelot_board.c | 4 ++-- |
| include/soc/mscc/ocelot.h | 2 ++ |
| 4 files changed, 8 insertions(+), 6 deletions(-) |
| |
| --- a/drivers/net/ethernet/mscc/ocelot.c |
| +++ b/drivers/net/ethernet/mscc/ocelot.c |
| @@ -500,13 +500,14 @@ EXPORT_SYMBOL(ocelot_port_enable); |
| static int ocelot_port_open(struct net_device *dev) |
| { |
| struct ocelot_port_private *priv = netdev_priv(dev); |
| - struct ocelot *ocelot = priv->port.ocelot; |
| + struct ocelot_port *ocelot_port = &priv->port; |
| + struct ocelot *ocelot = ocelot_port->ocelot; |
| int port = priv->chip_port; |
| int err; |
| |
| if (priv->serdes) { |
| err = phy_set_mode_ext(priv->serdes, PHY_MODE_ETHERNET, |
| - priv->phy_mode); |
| + ocelot_port->phy_mode); |
| if (err) { |
| netdev_err(dev, "Could not set mode of SerDes\n"); |
| return err; |
| @@ -514,7 +515,7 @@ static int ocelot_port_open(struct net_d |
| } |
| |
| err = phy_connect_direct(dev, priv->phy, &ocelot_port_adjust_link, |
| - priv->phy_mode); |
| + ocelot_port->phy_mode); |
| if (err) { |
| netdev_err(dev, "Could not attach to PHY\n"); |
| return err; |
| --- a/drivers/net/ethernet/mscc/ocelot.h |
| +++ b/drivers/net/ethernet/mscc/ocelot.h |
| @@ -70,7 +70,6 @@ struct ocelot_port_private { |
| |
| u8 vlan_aware; |
| |
| - phy_interface_t phy_mode; |
| struct phy *serdes; |
| |
| struct ocelot_port_tc tc; |
| --- a/drivers/net/ethernet/mscc/ocelot_board.c |
| +++ b/drivers/net/ethernet/mscc/ocelot_board.c |
| @@ -412,9 +412,9 @@ static int mscc_ocelot_probe(struct plat |
| if (phy_mode < 0) |
| phy_mode = PHY_INTERFACE_MODE_NA; |
| |
| - priv->phy_mode = phy_mode; |
| + ocelot_port->phy_mode = phy_mode; |
| |
| - switch (priv->phy_mode) { |
| + switch (ocelot_port->phy_mode) { |
| case PHY_INTERFACE_MODE_NA: |
| continue; |
| case PHY_INTERFACE_MODE_SGMII: |
| --- a/include/soc/mscc/ocelot.h |
| +++ b/include/soc/mscc/ocelot.h |
| @@ -425,6 +425,8 @@ struct ocelot_port { |
| u8 ptp_cmd; |
| struct sk_buff_head tx_skbs; |
| u8 ts_id; |
| + |
| + phy_interface_t phy_mode; |
| }; |
| |
| struct ocelot { |