| #include "mt7620a.dtsi" |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| compatible = "dovado,tiny-ac", "ralink,mt7620a-soc"; |
| model = "Dovado Tiny AC"; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| usb { |
| label = "green:usb"; |
| gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
| trigger-sources = <&ohci_port1>, <&ehci_port1>; |
| linux,default-trigger = "usbport"; |
| }; |
| |
| wifi { |
| label = "orange:wifi"; |
| gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| keys { |
| compatible = "gpio-keys"; |
| |
| reset { |
| label = "reset"; |
| gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_RESTART>; |
| }; |
| }; |
| |
| gpio_export { |
| compatible = "gpio-export"; |
| #size-cells = <0>; |
| |
| usbpower { |
| gpio-export,name = "usbpower"; |
| gpio-export,output = <1>; |
| gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| }; |
| |
| &gpio2 { |
| status = "okay"; |
| }; |
| |
| &gpio3 { |
| status = "okay"; |
| }; |
| |
| &spi0 { |
| status = "okay"; |
| |
| flash@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <10000000>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x30000>; |
| read-only; |
| }; |
| |
| partition@30000 { |
| label = "u-boot-env"; |
| reg = <0x30000 0x10000>; |
| read-only; |
| }; |
| |
| factory: partition@40000 { |
| label = "factory"; |
| reg = <0x40000 0x10000>; |
| read-only; |
| }; |
| |
| partition@50000 { |
| compatible = "denx,uimage"; |
| label = "firmware"; |
| reg = <0x50000 0x7b0000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &ehci { |
| status = "okay"; |
| }; |
| |
| &ohci { |
| status = "okay"; |
| }; |
| |
| ðernet { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; |
| |
| mediatek,portmap = "llllw"; |
| |
| port@4 { |
| status = "okay"; |
| phy-mode = "rgmii"; |
| phy-handle = <&phy4>; |
| }; |
| |
| port@5 { |
| status = "okay"; |
| phy-mode = "rgmii"; |
| phy-handle = <&phy5>; |
| }; |
| |
| mdio-bus { |
| status = "okay"; |
| |
| phy4: ethernet-phy@4 { |
| reg = <4>; |
| phy-mode = "rgmii"; |
| }; |
| |
| phy5: ethernet-phy@5 { |
| reg = <5>; |
| phy-mode = "rgmii"; |
| }; |
| }; |
| }; |
| |
| &gsw { |
| mediatek,port4-gmac; |
| mediatek,ephy-base = /bits/ 8 <8>; |
| }; |
| |
| &pcie { |
| status = "okay"; |
| }; |
| |
| &state_default { |
| gpio { |
| groups = "uartf", "nd_sd", "wled"; |
| function = "gpio"; |
| }; |
| }; |
| |
| &pcie0 { |
| mt76@0,0 { |
| reg = <0x0000 0 0 0 0>; |
| mediatek,mtd-eeprom = <&factory 0x8000>; |
| ieee80211-freq-limit = <5000000 6000000>; |
| }; |
| }; |