target/linux/ramips/dts/mt7620n_wrtnode_wrtnode.dts

#include "mt7620n.dtsi"

#include <dt-bindings/gpio/gpio.h>

/ {
	compatible = "wrtnode,wrtnode", "ralink,mt7620n-soc";
	model = "WRTNODE";

	aliases {
		led-boot = &led_indicator;
		led-failsafe = &led_indicator;
		led-running = &led_indicator;
		led-upgrade = &led_indicator;
	};

	leds {
		compatible = "gpio-leds";

		led_indicator: indicator {
			label = "blue:indicator";
			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
		};
	};
};

&gpio1 {
	status = "okay";
};

&spi0 {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <10000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x0 0x30000>;
				read-only;
			};

			partition@30000 {
				label = "u-boot-env";
				reg = <0x30000 0x10000>;
				read-only;
			};

			factory: partition@40000 {
				label = "factory";
				reg = <0x40000 0x10000>;
				read-only;
			};

			partition@50000 {
				compatible = "denx,uimage";
				label = "firmware";
				reg = <0x50000 0xfb0000>;
			};
		};
	};
};

&ehci {
	status = "okay";
};

&ohci {
	status = "okay";
};

&ethernet {
	mtd-mac-address = <&factory 0x4>;

	mediatek,portmap = "wllll";
};

&wmac {
	ralink,mtd-eeprom = <&factory 0x0>;
};

&state_default {
	default {
		groups = "ephy", "wled", "pa", "i2c", "wdt", "uartf", "spi refclk";
		function = "gpio";
	};
};