| #include "rt5350.dtsi" |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| compatible = "omnima,miniembplug", "ralink,rt5350-soc"; |
| model = "Omnima MiniEMBPlug"; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| wlan { |
| label = "red:wlan"; |
| gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| mobile { |
| label = "green:mobile"; |
| gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; |
| trigger-sources = <&ohci_port1>, <&ehci_port1>; |
| linux,default-trigger = "usbport"; |
| }; |
| }; |
| |
| keys { |
| compatible = "gpio-keys-polled"; |
| poll-interval = <20>; |
| |
| wps { |
| label = "wps"; |
| gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_WPS_BUTTON>; |
| }; |
| |
| reset { |
| label = "reset"; |
| gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_WPS_BUTTON>; |
| }; |
| |
| mode-one { |
| label = "mode1"; |
| gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_WPS_BUTTON>; |
| }; |
| |
| mode-two { |
| label = "mode2"; |
| gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_WPS_BUTTON>; |
| }; |
| }; |
| }; |
| |
| &state_default { |
| gpio { |
| groups = "i2c", "jtag", "uartf"; |
| function = "gpio"; |
| }; |
| }; |
| |
| &spi0 { |
| status = "okay"; |
| |
| flash@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <10000000>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x30000>; |
| read-only; |
| }; |
| |
| partition@30000 { |
| label = "u-boot-env"; |
| reg = <0x30000 0x10000>; |
| read-only; |
| }; |
| |
| factory: partition@40000 { |
| label = "factory"; |
| reg = <0x40000 0x10000>; |
| read-only; |
| }; |
| |
| partition@50000 { |
| compatible = "denx,uimage"; |
| label = "firmware"; |
| reg = <0x50000 0x7b0000>; |
| }; |
| }; |
| }; |
| }; |
| |
| ðernet { |
| mtd-mac-address = <&factory 0x4>; |
| }; |
| |
| &esw { |
| mediatek,portmap = <0x2f>; |
| }; |
| |
| &wmac { |
| ralink,mtd-eeprom = <&factory 0x0>; |
| }; |