| From 372b138a6bc43b0fdff4e46ae4c799fd1b1f2785 Mon Sep 17 00:00:00 2001 |
| From: Naushir Patuck <naush@raspberrypi.com> |
| Date: Thu, 12 Mar 2020 14:09:38 +0000 |
| Subject: [PATCH] media: imx219: Advertise embedded data node on media |
| pad 1 |
| |
| This commit updates the imx219 driver to adverise support for embedded |
| data streams. This can then be used by the bcm2835-unicam driver, which |
| has recently been updated to expose the embedded data stream to |
| userland. |
| |
| The imx219 sensor subdevice overloads the media pad to differentiate |
| between image stream (pad 0) and embedded data stream (pad 1) when |
| performing the v4l2_subdev_pad_ops functions. |
| |
| Signed-off-by: Naushir Patuck <naush@raspberrypi.com> |
| --- |
| drivers/media/i2c/imx219.c | 226 +++++++++++++++++++++++++------------ |
| 1 file changed, 155 insertions(+), 71 deletions(-) |
| |
| --- a/drivers/media/i2c/imx219.c |
| +++ b/drivers/media/i2c/imx219.c |
| @@ -112,6 +112,16 @@ |
| #define IMX219_TESTP_BLUE_DEFAULT 0 |
| #define IMX219_TESTP_GREENB_DEFAULT 0 |
| |
| +/* Embedded metadata stream structure */ |
| +#define IMX219_EMBEDDED_LINE_WIDTH 16384 |
| +#define IMX219_NUM_EMBEDDED_LINES 1 |
| + |
| +enum pad_types { |
| + IMAGE_PAD, |
| + METADATA_PAD, |
| + NUM_PADS |
| +}; |
| + |
| struct imx219_reg { |
| u16 address; |
| u8 val; |
| @@ -503,7 +513,7 @@ static const struct imx219_mode supporte |
| |
| struct imx219 { |
| struct v4l2_subdev sd; |
| - struct media_pad pad; |
| + struct media_pad pad[NUM_PADS]; |
| |
| struct v4l2_mbus_framefmt fmt; |
| |
| @@ -652,17 +662,25 @@ static void imx219_set_default_format(st |
| static int imx219_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) |
| { |
| struct imx219 *imx219 = to_imx219(sd); |
| - struct v4l2_mbus_framefmt *try_fmt = |
| - v4l2_subdev_get_try_format(sd, fh->pad, 0); |
| + struct v4l2_mbus_framefmt *try_fmt_img = |
| + v4l2_subdev_get_try_format(sd, fh->pad, IMAGE_PAD); |
| + struct v4l2_mbus_framefmt *try_fmt_meta = |
| + v4l2_subdev_get_try_format(sd, fh->pad, METADATA_PAD); |
| |
| mutex_lock(&imx219->mutex); |
| |
| - /* Initialize try_fmt */ |
| - try_fmt->width = supported_modes[0].width; |
| - try_fmt->height = supported_modes[0].height; |
| - try_fmt->code = imx219_get_format_code(imx219, |
| - MEDIA_BUS_FMT_SRGGB10_1X10); |
| - try_fmt->field = V4L2_FIELD_NONE; |
| + /* Initialize try_fmt for the image pad */ |
| + try_fmt_img->width = supported_modes[0].width; |
| + try_fmt_img->height = supported_modes[0].height; |
| + try_fmt_img->code = imx219_get_format_code(imx219, |
| + MEDIA_BUS_FMT_SRGGB10_1X10); |
| + try_fmt_img->field = V4L2_FIELD_NONE; |
| + |
| + /* Initialize try_fmt for the embedded metadata pad */ |
| + try_fmt_meta->width = IMX219_EMBEDDED_LINE_WIDTH; |
| + try_fmt_meta->height = IMX219_NUM_EMBEDDED_LINES; |
| + try_fmt_meta->code = MEDIA_BUS_FMT_SENSOR_DATA; |
| + try_fmt_meta->field = V4L2_FIELD_NONE; |
| |
| mutex_unlock(&imx219->mutex); |
| |
| @@ -764,10 +782,21 @@ static int imx219_enum_mbus_code(struct |
| { |
| struct imx219 *imx219 = to_imx219(sd); |
| |
| - if (code->index >= (ARRAY_SIZE(codes) / 4)) |
| + if (code->pad >= NUM_PADS) |
| return -EINVAL; |
| |
| - code->code = imx219_get_format_code(imx219, codes[code->index * 4]); |
| + if (code->pad == IMAGE_PAD) { |
| + if (code->index >= (ARRAY_SIZE(codes) / 4)) |
| + return -EINVAL; |
| + |
| + code->code = imx219_get_format_code(imx219, |
| + codes[code->index * 4]); |
| + } else { |
| + if (code->index > 0) |
| + return -EINVAL; |
| + |
| + code->code = MEDIA_BUS_FMT_SENSOR_DATA; |
| + } |
| |
| return 0; |
| } |
| @@ -778,16 +807,29 @@ static int imx219_enum_frame_size(struct |
| { |
| struct imx219 *imx219 = to_imx219(sd); |
| |
| - if (fse->index >= ARRAY_SIZE(supported_modes)) |
| + if (fse->pad >= NUM_PADS) |
| return -EINVAL; |
| |
| - if (fse->code != imx219_get_format_code(imx219, fse->code)) |
| - return -EINVAL; |
| + if (fse->pad == IMAGE_PAD) { |
| + if (fse->index >= ARRAY_SIZE(supported_modes)) |
| + return -EINVAL; |
| + |
| + if (fse->code != imx219_get_format_code(imx219, fse->code)) |
| + return -EINVAL; |
| + |
| + fse->min_width = supported_modes[fse->index].width; |
| + fse->max_width = fse->min_width; |
| + fse->min_height = supported_modes[fse->index].height; |
| + fse->max_height = fse->min_height; |
| + } else { |
| + if (fse->code != MEDIA_BUS_FMT_SENSOR_DATA || fse->index > 0) |
| + return -EINVAL; |
| |
| - fse->min_width = supported_modes[fse->index].width; |
| - fse->max_width = fse->min_width; |
| - fse->min_height = supported_modes[fse->index].height; |
| - fse->max_height = fse->min_height; |
| + fse->min_width = IMX219_EMBEDDED_LINE_WIDTH; |
| + fse->max_width = fse->min_width; |
| + fse->min_height = IMX219_NUM_EMBEDDED_LINES; |
| + fse->max_height = fse->min_height; |
| + } |
| |
| return 0; |
| } |
| @@ -802,9 +844,9 @@ static void imx219_reset_colorspace(stru |
| fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace); |
| } |
| |
| -static void imx219_update_pad_format(struct imx219 *imx219, |
| - const struct imx219_mode *mode, |
| - struct v4l2_subdev_format *fmt) |
| +static void imx219_update_image_pad_format(struct imx219 *imx219, |
| + const struct imx219_mode *mode, |
| + struct v4l2_subdev_format *fmt) |
| { |
| fmt->format.width = mode->width; |
| fmt->format.height = mode->height; |
| @@ -812,20 +854,38 @@ static void imx219_update_pad_format(str |
| imx219_reset_colorspace(&fmt->format); |
| } |
| |
| +static void imx219_update_metadata_pad_format(struct v4l2_subdev_format *fmt) |
| +{ |
| + fmt->format.width = IMX219_EMBEDDED_LINE_WIDTH; |
| + fmt->format.height = IMX219_NUM_EMBEDDED_LINES; |
| + fmt->format.code = MEDIA_BUS_FMT_SENSOR_DATA; |
| + fmt->format.field = V4L2_FIELD_NONE; |
| +} |
| + |
| static int __imx219_get_pad_format(struct imx219 *imx219, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *fmt) |
| { |
| + if (fmt->pad >= NUM_PADS) |
| + return -EINVAL; |
| + |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
| struct v4l2_mbus_framefmt *try_fmt = |
| v4l2_subdev_get_try_format(&imx219->sd, cfg, fmt->pad); |
| /* update the code which could change due to vflip or hflip: */ |
| - try_fmt->code = imx219_get_format_code(imx219, try_fmt->code); |
| + try_fmt->code = fmt->pad == IMAGE_PAD ? |
| + imx219_get_format_code(imx219, try_fmt->code) : |
| + MEDIA_BUS_FMT_SENSOR_DATA; |
| fmt->format = *try_fmt; |
| } else { |
| - imx219_update_pad_format(imx219, imx219->mode, fmt); |
| - fmt->format.code = imx219_get_format_code(imx219, |
| - imx219->fmt.code); |
| + if (fmt->pad == IMAGE_PAD) { |
| + imx219_update_image_pad_format(imx219, imx219->mode, |
| + fmt); |
| + fmt->format.code = imx219_get_format_code(imx219, |
| + imx219->fmt.code); |
| + } else { |
| + imx219_update_metadata_pad_format(fmt); |
| + } |
| } |
| |
| return 0; |
| @@ -855,51 +915,74 @@ static int imx219_set_pad_format(struct |
| int exposure_max, exposure_def, hblank; |
| unsigned int i; |
| |
| - mutex_lock(&imx219->mutex); |
| - |
| - for (i = 0; i < ARRAY_SIZE(codes); i++) |
| - if (codes[i] == fmt->format.code) |
| - break; |
| - if (i >= ARRAY_SIZE(codes)) |
| - i = 0; |
| + if (fmt->pad >= NUM_PADS) |
| + return -EINVAL; |
| |
| - /* Bayer order varies with flips */ |
| - fmt->format.code = imx219_get_format_code(imx219, codes[i]); |
| + mutex_lock(&imx219->mutex); |
| |
| - mode = v4l2_find_nearest_size(supported_modes, |
| - ARRAY_SIZE(supported_modes), |
| - width, height, |
| - fmt->format.width, fmt->format.height); |
| - imx219_update_pad_format(imx219, mode, fmt); |
| - if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
| - framefmt = v4l2_subdev_get_try_format(sd, cfg, fmt->pad); |
| - *framefmt = fmt->format; |
| - } else if (imx219->mode != mode || |
| - imx219->fmt.code != fmt->format.code) { |
| - imx219->fmt = fmt->format; |
| - imx219->mode = mode; |
| - /* Update limits and set FPS to default */ |
| - __v4l2_ctrl_modify_range(imx219->vblank, IMX219_VBLANK_MIN, |
| - IMX219_VTS_MAX - mode->height, 1, |
| - mode->vts_def - mode->height); |
| - __v4l2_ctrl_s_ctrl(imx219->vblank, |
| - mode->vts_def - mode->height); |
| - /* Update max exposure while meeting expected vblanking */ |
| - exposure_max = mode->vts_def - 4; |
| - exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ? |
| - exposure_max : IMX219_EXPOSURE_DEFAULT; |
| - __v4l2_ctrl_modify_range(imx219->exposure, |
| - imx219->exposure->minimum, |
| - exposure_max, imx219->exposure->step, |
| - exposure_def); |
| - /* |
| - * Currently PPL is fixed to IMX219_PPL_DEFAULT, so hblank |
| - * depends on mode->width only, and is not changeble in any |
| - * way other than changing the mode. |
| - */ |
| - hblank = IMX219_PPL_DEFAULT - mode->width; |
| - __v4l2_ctrl_modify_range(imx219->hblank, hblank, hblank, 1, |
| - hblank); |
| + if (fmt->pad == IMAGE_PAD) { |
| + for (i = 0; i < ARRAY_SIZE(codes); i++) |
| + if (codes[i] == fmt->format.code) |
| + break; |
| + if (i >= ARRAY_SIZE(codes)) |
| + i = 0; |
| + |
| + /* Bayer order varies with flips */ |
| + fmt->format.code = imx219_get_format_code(imx219, codes[i]); |
| + |
| + mode = v4l2_find_nearest_size(supported_modes, |
| + ARRAY_SIZE(supported_modes), |
| + width, height, |
| + fmt->format.width, |
| + fmt->format.height); |
| + imx219_update_image_pad_format(imx219, mode, fmt); |
| + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
| + framefmt = v4l2_subdev_get_try_format(sd, cfg, |
| + fmt->pad); |
| + *framefmt = fmt->format; |
| + } else if (imx219->mode != mode || |
| + imx219->fmt.code != fmt->format.code) { |
| + imx219->fmt = fmt->format; |
| + imx219->mode = mode; |
| + /* Update limits and set FPS to default */ |
| + __v4l2_ctrl_modify_range(imx219->vblank, |
| + IMX219_VBLANK_MIN, |
| + IMX219_VTS_MAX - mode->height, |
| + 1, |
| + mode->vts_def - mode->height); |
| + __v4l2_ctrl_s_ctrl(imx219->vblank, |
| + mode->vts_def - mode->height); |
| + /* |
| + * Update max exposure while meeting |
| + * expected vblanking |
| + */ |
| + exposure_max = mode->vts_def - 4; |
| + exposure_def = |
| + (exposure_max < IMX219_EXPOSURE_DEFAULT) ? |
| + exposure_max : IMX219_EXPOSURE_DEFAULT; |
| + __v4l2_ctrl_modify_range(imx219->exposure, |
| + imx219->exposure->minimum, |
| + exposure_max, |
| + imx219->exposure->step, |
| + exposure_def); |
| + /* |
| + * Currently PPL is fixed to IMX219_PPL_DEFAULT, so |
| + * hblank depends on mode->width only, and is not |
| + * changeble in any way other than changing the mode. |
| + */ |
| + hblank = IMX219_PPL_DEFAULT - mode->width; |
| + __v4l2_ctrl_modify_range(imx219->hblank, hblank, hblank, |
| + 1, hblank); |
| + } |
| + } else { |
| + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
| + framefmt = v4l2_subdev_get_try_format(sd, cfg, |
| + fmt->pad); |
| + *framefmt = fmt->format; |
| + } else { |
| + /* Only one embedded data mode is supported */ |
| + imx219_update_metadata_pad_format(fmt); |
| + } |
| } |
| |
| mutex_unlock(&imx219->mutex); |
| @@ -1399,13 +1482,14 @@ static int imx219_probe(struct i2c_clien |
| imx219->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| imx219->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; |
| |
| - /* Initialize source pad */ |
| - imx219->pad.flags = MEDIA_PAD_FL_SOURCE; |
| + /* Initialize source pads */ |
| + imx219->pad[IMAGE_PAD].flags = MEDIA_PAD_FL_SOURCE; |
| + imx219->pad[METADATA_PAD].flags = MEDIA_PAD_FL_SOURCE; |
| |
| /* Initialize default format */ |
| imx219_set_default_format(imx219); |
| |
| - ret = media_entity_pads_init(&imx219->sd.entity, 1, &imx219->pad); |
| + ret = media_entity_pads_init(&imx219->sd.entity, NUM_PADS, imx219->pad); |
| if (ret) { |
| dev_err(dev, "failed to init entity pads: %d\n", ret); |
| goto error_handler_free; |