| # Copyright (C) 2006-2012 OpenWrt.org |
| # Copyright (C) 2010 Vertical Communications |
| # |
| # This is free software, licensed under the GNU General Public License v2. |
| # See /LICENSE for more information. |
| # |
| |
| config TARGET_DEFAULT_LAN_IP_FROM_PREINIT |
| bool "Use preinit IP configuration as default LAN IP" if IMAGEOPT |
| default n |
| help |
| Enabling this will set the default LAN IP address and netmask |
| to the preinit values set in the image config. |
| |
| menuconfig PREINITOPT |
| bool "Preinit configuration options" if IMAGEOPT |
| default n |
| help |
| These options are used to control the environment used to initialize |
| the system before running init (which typically mean /sbin/init which |
| switches to multiuser mode). |
| |
| config TARGET_PREINIT_SUPPRESS_STDERR |
| bool "Suppress stderr messages during preinit" if PREINITOPT |
| default y |
| help |
| Sends stderr to null during preinit. This is the default behaviour |
| in previous versions of OpenWrt. This also prevents init process |
| itself from displaying stderr, however processes launched by init |
| in multiuser through inittab will use the current terminal (e.g. |
| the ash shell launched by inittab will display stderr). That's |
| the same behaviour as seen in previous version of OpenWrt. |
| |
| config TARGET_PREINIT_DISABLE_FAILSAFE |
| bool |
| prompt "Disable failsafe" if PREINITOPT |
| default n |
| help |
| Disable failsafe mode. While it is very handy while |
| experimenting or developing it really ought to be |
| disabled in production environments as it is a major |
| security loophole. |
| |
| config TARGET_PREINIT_TIMEOUT |
| int |
| prompt "Failsafe/Debug wait timeout" if PREINITOPT |
| default 2 |
| help |
| How long to wait for failsafe mode to be entered or for |
| a debug option to be pressed before continuing with a |
| regular boot. |
| |
| config TARGET_PREINIT_SHOW_NETMSG |
| bool |
| prompt "Show all preinit network messages" if PREINITOPT |
| default n |
| help |
| Show preinit all network messages (via netmsg broadcast), not only |
| the message indicating to press reset to enter failsafe. Note that |
| if the architecture doesn't define an interface, and there is no |
| 'Preinit network interface' defined, then no messages will be |
| emitted, even if this is set. |
| |
| config TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG |
| bool |
| prompt "Suppress network message indicating failsafe" if ( PREINITOPT && !TARGET_PREINIT_SHOW_NETMSG && !TARGET_PREINIT_DISABLE_FAILSAFE ) |
| default n |
| help |
| If "Show all preinit network messages" above is not set, then |
| setting this option suppresses the only message that would be |
| emitted otherwise, name the network message to enter failsafe |
| (via netmsg). |
| |
| config TARGET_PREINIT_IFNAME |
| string |
| prompt "Preinit network interface" if PREINITOPT |
| default "" |
| help |
| Interface for sending preinit messages to network, and any other |
| default networking in failsafe or preinit. If empty |
| uses $ifname (if defined in /etc/preinit.arch). |
| |
| config TARGET_PREINIT_IP |
| string |
| prompt "IP address for preinit network messages" if PREINITOPT |
| default "192.168.1.1" |
| help |
| IP address used to configure interface for preinit network |
| messages, including failsafe messages |
| |
| config TARGET_PREINIT_NETMASK |
| string |
| prompt "Netmask for preinit network messages" if PREINITOPT |
| default "255.255.255.0" |
| help |
| Netmask used to configure interface for preinit network |
| messages, including failsafes messages |
| |
| config TARGET_PREINIT_BROADCAST |
| string |
| prompt "Broadcast address for preinit network messages" if PREINITOPT |
| default "192.168.1.255" |
| help |
| Broadcast address to which to send preinit network messages, as |
| as failsafe messages |
| |
| |
| menuconfig INITOPT |
| bool "Init configuration options" if IMAGEOPT |
| default n |
| help |
| These option choose the command that will run as the 'init' command |
| (that is which is responsible for controlling the system once preinit |
| transfers control to it) as well as some options controlling its |
| behaviour. Normally init is /sbin/init. |
| |
| config TARGET_INIT_PATH |
| string |
| prompt "PATH for regular boot" if INITOPT |
| default "/usr/sbin:/usr/bin:/sbin:/bin" |
| help |
| Default PATH used during normal operation |
| |
| config TARGET_INIT_ENV |
| string |
| prompt "Environment variables to set when starting init (start with none)" if INITOPT |
| default "" |
| help |
| Should be a space separated list of variable assignments. These |
| variables will be present in the environment. Spaces may not be |
| present (including through expansion) even in a quoted string |
| (env doesn't understanding quoting). |
| |
| config TARGET_INIT_CMD |
| string |
| prompt "Init command" if INITOPT |
| default "/sbin/init" |
| help |
| The executable to run as the init process. Is 'exec'd by |
| preinit (which is the init that the kernel launches on boot). |
| |
| config TARGET_INIT_SUPPRESS_STDERR |
| bool |
| prompt "Suppress stderr messages of init" if INITOPT |
| default y |
| help |
| Prevents showing stderr messages for init command if not already |
| suppressed during preinit. This is the default behaviour in |
| previous versions of OpenWrt. Removing this does nothing if |
| stderr is suppressed during preinit (which is the default). |
| |
| |
| menuconfig VERSIONOPT |
| bool "Version configuration options" if IMAGEOPT |
| default n |
| help |
| These options allow to override the version information embedded in |
| the /etc/openwrt_version, /etc/openwrt_release, /etc/banner, |
| /etc/opkg.conf, and /etc/os-release files. Usually there is no need |
| to set these, but they're useful for release builds or custom OpenWrt |
| redistributions that should carry custom version tags. |
| |
| if VERSIONOPT |
| |
| config VERSION_DIST |
| string |
| prompt "Release distribution" |
| default "OpenWrt" |
| help |
| This is the name of the release distribution. |
| If unspecified, it defaults to OpenWrt. |
| |
| config VERSION_NUMBER |
| string |
| prompt "Release version number" |
| help |
| This is the release version number embedded in the image. |
| If unspecified, it defaults to SNAPSHOT for the master branch |
| or to ##.##-SNAPSHOT on release branches. |
| |
| config VERSION_CODE |
| string |
| prompt "Release version code" |
| help |
| This is the release version code embedded in the image. |
| If unspecified, it defaults to a revision number describing the |
| repository version of the source, e.g. the number of commits |
| since a branch point or a short Git commit ID. |
| |
| config VERSION_REPO |
| string |
| prompt "Release repository" |
| default "https://downloads.openwrt.org/releases/24.10-SNAPSHOT" |
| help |
| This is the repository address embedded in the image, it defaults |
| to the trunk snapshot repo; the url may contain the following placeholders: |
| %R .. Repository revision ID |
| %V .. Configured release version number or "SNAPSHOT", uppercase |
| %v .. Configured release version number or "snapshot", lowercase |
| %C .. Configured release revision code or value of %R, uppercase |
| %c .. Configured release revision code or value of %R, lowercase |
| %D .. Distribution name or "OpenWrt", uppercase |
| %d .. Distribution name or "openwrt", lowercase |
| %T .. Target name |
| %S .. Target/Subtarget name |
| %A .. Package architecture |
| %t .. Build taint flags, e.g. "no-all busybox" |
| %M .. Manufacturer name or "OpenWrt" |
| %P .. Product name or "Generic" |
| %h .. Hardware revision or "v0" |
| |
| config VERSION_HOME_URL |
| string |
| prompt "Release Homepage" |
| help |
| This is the release version homepage |
| |
| config VERSION_MANUFACTURER |
| string |
| prompt "Manufacturer name" |
| help |
| This is the manufacturer name embedded in /etc/device_info |
| Useful for OEMs building OpenWrt based firmware |
| |
| config VERSION_MANUFACTURER_URL |
| string |
| prompt "Manufacturer URL" |
| help |
| This is an URL to the manufacturer's website embedded in /etc/device_info |
| Useful for OEMs building OpenWrt based firmware |
| |
| config VERSION_BUG_URL |
| string |
| prompt "Bug reporting URL" |
| help |
| This is an URL to provide users for providing bug reports |
| |
| config VERSION_SUPPORT_URL |
| string |
| prompt "Support URL" |
| help |
| This an URL to provide users seeking support |
| |
| config VERSION_PRODUCT |
| string |
| prompt "Product name" |
| help |
| This is the product name embedded in /etc/device_info |
| Useful for OEMs building OpenWrt based firmware |
| |
| config VERSION_HWREV |
| string |
| prompt "Hardware revision" |
| help |
| This is the hardware revision string embedded in /etc/device_info |
| Useful for OEMs building OpenWrt based firmware |
| |
| config VERSION_FILENAMES |
| bool |
| prompt "Version number in filenames" |
| default y |
| help |
| Enable this to include the version number in firmware image, SDK- |
| and Image Builder archive file names |
| |
| config VERSION_CODE_FILENAMES |
| bool |
| prompt "Revision code in filenames" |
| default y |
| help |
| Enable this to include the revision identifier or the configured |
| version code into the firmware image, SDK- and Image Builder archive |
| file names |
| endif |
| |
| |
| menuconfig PER_FEED_REPO |
| bool "Separate feed repositories" if IMAGEOPT |
| default y |
| help |
| If set, a separate repository is generated within bin/*/packages/ |
| for the core packages and each enabled feed. |
| |
| source "tmp/.config-feeds.in" |