target/linux/layerscape/patches-5.4/302-dts-0097-LF-387-5-arm64-dts-layerscape-add-chip-specific-comp.patch

From 4cb6a451112308b2679c567ac680bc74ab93a92a Mon Sep 17 00:00:00 2001
From: Ran Wang <ran.wang_1@nxp.com>
Date: Fri, 22 Nov 2019 14:18:49 +0800
Subject: [PATCH] LF-387-5 arm64: dts: layerscape: add chip-specific compatible
 string to usb nodes

To allow USB dwc3 driver to conduct some chip-scpeific configuring.
Cover all arm64 based Layerscape SoCs.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Reviewed-by: Leo Li <leo.li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 6 +++---
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 6 +++---
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 4 ++--
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ++--
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 4 ++--
 6 files changed, 13 insertions(+), 13 deletions(-)

--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -444,7 +444,7 @@
 		};
 
 		usb0: usb3@2f00000 {
-			compatible = "snps,dwc3";
+			compatible = "fsl,ls1012a-dwc3", "snps,dwc3";
 			reg = <0x0 0x2f00000 0x0 0x10000>;
 			interrupts = <0 60 0x4>;
 			dr_mode = "host";
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -695,7 +695,7 @@
 			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
 
 			usb0: usb3@2f00000 {
-				compatible = "snps,dwc3";
+				compatible = "fsl,ls1043a-dwc3", "snps,dwc3";
 				reg = <0x0 0x2f00000 0x0 0x10000>;
 				interrupts = <0 60 0x4>;
 				dr_mode = "host";
@@ -709,7 +709,7 @@
 			};
 
 			usb1: usb3@3000000 {
-				compatible = "snps,dwc3";
+				compatible = "fsl,ls1043a-dwc3", "snps,dwc3";
 				reg = <0x0 0x3000000 0x0 0x10000>;
 				interrupts = <0 61 0x4>;
 				dr_mode = "host";
@@ -723,7 +723,7 @@
 			};
 
 			usb2: usb3@3100000 {
-				compatible = "snps,dwc3";
+				compatible = "fsl,ls1043a-dwc3", "snps,dwc3";
 				reg = <0x0 0x3100000 0x0 0x10000>;
 				interrupts = <0 63 0x4>;
 				dr_mode = "host";
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -594,7 +594,7 @@
 			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
 
 			usb0: usb@2f00000 {
-				compatible = "snps,dwc3";
+				compatible = "fsl,ls1046a-dwc3", "snps,dwc3";
 				reg = <0x0 0x2f00000 0x0 0x10000>;
 				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
@@ -607,7 +607,7 @@
 			};
 
 			usb1: usb@3000000 {
-				compatible = "snps,dwc3";
+				compatible = "fsl,ls1046a-dwc3", "snps,dwc3";
 				reg = <0x0 0x3000000 0x0 0x10000>;
 				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
@@ -620,7 +620,7 @@
 			};
 
 			usb2: usb@3100000 {
-				compatible = "snps,dwc3";
+				compatible = "fsl,ls1046a-dwc3", "snps,dwc3";
 				reg = <0x0 0x3100000 0x0 0x10000>;
 				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -394,7 +394,7 @@
 		};
 
 		usb0: usb3@3100000 {
-			compatible = "snps,dwc3";
+			compatible = "fsl,ls1088a-dwc3", "snps,dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
 			interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
@@ -406,7 +406,7 @@
 		};
 
 		usb1: usb3@3110000 {
-			compatible = "snps,dwc3";
+			compatible = "fsl,ls1088a-dwc3", "snps,dwc3";
 			reg = <0x0 0x3110000 0x0 0x10000>;
 			interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -729,7 +729,7 @@
 
 		usb0: usb3@3100000 {
 			status = "disabled";
-			compatible = "snps,dwc3";
+			compatible = "fsl,ls2088a-dwc3", "snps,dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
 			interrupts = <0 80 0x4>; /* Level high type */
 			dr_mode = "host";
@@ -741,7 +741,7 @@
 
 		usb1: usb3@3110000 {
 			status = "disabled";
-			compatible = "snps,dwc3";
+			compatible = "fsl,ls2088a-dwc3", "snps,dwc3";
 			reg = <0x0 0x3110000 0x0 0x10000>;
 			interrupts = <0 81 0x4>; /* Level high type */
 			dr_mode = "host";
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -864,7 +864,7 @@
 		};
 
 		usb0: usb@3100000 {
-			compatible = "snps,dwc3";
+			compatible = "fsl,lx2160a-dwc3", "snps,dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
@@ -878,7 +878,7 @@
 		};
 
 		usb1: usb@3110000 {
-			compatible = "snps,dwc3";
+			compatible = "fsl,lx2160a-dwc3", "snps,dwc3";
 			reg = <0x0 0x3110000 0x0 0x10000>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";